summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-24drm/amd/display: Engine-specific encoder allocationWesley Chalmers
[WHY] From DCE110 onward, we have the ability to assign DIG BE and FE separately for any display connector type; before, we could only do this for DP. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: enabling stream after HPD low to high happenedCharlene Liu
[Why] 1. No real HPD plug in/out but HPD happens, the driver notifies OS connection changed. 2. No display in target. When HPD goes low to high, the driver should regard as HPD and enter setmode flow. [How] In this case, even stream didn't change but still retrain. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Program VTG params after programming Global SyncJoshua Aberback
[Why] VTG has a parameter FP2, which is defined as: if VSTARTUP is before VSYNC: FP2 = number of lines in between VSTARTUP and VSYNC else FP2 = 0 Currently, FP2 is only programmed during "program_timing". However, the position of VSTARTUP is affected by the prefetching requirements on all pipes, so the position might change when we do memory request control on another pipe, so we need to make sure that FP2 stays up-to-date whenever we adjust VSTARTUP. [How] - refactor VTG_CONTROL programming into a new function "set_vtg_params" - call it after calling "program_global_sync" - make sure it's called after because it relies on the cached dlg params Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: add null checks and set update flagsDmytro Laktyushkin
* add plane state null checks * add and set update surface flags Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: 3.2.30Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Reuse MPC OGRAM for 1D blenderVitaly Prosyak
[Why & How] Reuse existent code path and in order to do that apply de gamma in 1D blender LUT and re use MPC OGAM. Follow up is required. Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Vitaly Prosyak <Vitaly.Prosyak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Remove DPMS state dependency for fast bootSivapiriyanKumarasamy
[Why] The DPMS state of a display should not impact whether we want to enable fast boot. Currently fast boot is not enabled when resuming from S4 because of this. [How] Remove check for DPMS state when determining if fast boot can be applied. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Hook up CRC capture support for dce120Nicholas Kazlauskas
[Why] Many IGT tests require CRC capture in order to confirm that the output is visually correct. These skip on dce120 because configure_crc and get_crc aren't set. [How] Hook up is_tg_enabled, configure_crc and get_crc functions on dce120's timing generator. The logic should be the same as DCE and DCN with some minor register naming differences. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: define v_total_min and max parametersCharlene Liu
add these parameters for future use Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: support sw smu hotspot and memory temperature retrievalEvan Quan
Support hotspot and memory temperature retrieval on sw smu routine. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: support uclk activity retrieve on sw smu routineEvan Quan
Support realtime uclk activity report. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: honor hw limit on fetching metrics dataEvan Quan
Request too frequently may get corrupt data. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: support ppfeatures sysfs interface on sw smu routineEvan Quan
Support ppfeatures sysfs interface on Vega20 sw smu routine. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: drop redundant smu callEvan Quan
smu_get_clk_info_from_vbios() was called repeatedly. It seems a merge error. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: drop unnecessary sw smu checkEvan Quan
There is already sw smu check on IP block adding. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Drop DCN1_01 guardsHarry Wentland
[WHY] These were only needed for bringup. They're not needed anymore. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Don't load DMCU for Raven 1 (v2)Harry Wentland
[WHY] Some early Raven boards had a bad SBIOS that doesn't play nicely with the DMCU FW. We thought the issues were fixed by ignoring errors on DMCU load but that doesn't seem to be the case. We've still seen reports of users unable to boot their systems at all. [HOW] Disable DMCU load on Raven 1. Only load it for Raven 2 and Picasso. v2: Fix ifdef (Alex) Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Add ASICREV_IS_PICASSOHarry Wentland
[WHY] We only want to load DMCU FW on Picasso and Raven 2, not on Raven 1. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2019-05-24drm/amdgpu: Report firmware versions with sysfs v2Ori Messinger
Firmware versions can be found as separate sysfs files at: /sys/class/drm/cardX/device/fw_version (where X is the card number) The firmware versions are displayed in hexadecimal. v2: Moved sysfs files to subfolder Signed-off-by: Ori Messinger <ori.messinger@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: make VCN DPG pause mode detached from general VCNLeo Liu
It should be attached to VCN 1.0 Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: move the VCN DPG mode read and write to VCNLeo Liu
Since this is VCN specific and only used by VCN Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu/sriov: Need to initialize the HDP_NONSURFACE_BAStETiecheng Zhou
it requires to initialize HDP_NONSURFACE_BASE, so as to avoid using the value left by a previous VM under sriov scenario. v2: it should not hurt baremetal, generalize it for both sriov and baremetal Signed-off-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: suppress repeating tmo reportMonk Liu
only report once per TMO job and the timer would be restarted upon the job finished if it's just slow. Suggested-by: Christian König <christian.koenig@amd.com> Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: remove static GDS, GWS and OA allocationChristian König
As far as we know this was never used by userspace and so should be removed. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: update Vega10 ACG Avfs Gb parametersEvan Quan
Update Vega10 ACG Avfs GB parameters. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: force to update all clock tables on OD resetEvan Quan
On OD reset, the clock tables in SMU need to be reset to default. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: update Vega10 power state on ODEvan Quan
Update Vega10 top performance level power state accordingly on OD. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: avoid repeat AVFS enablement/disablementEvan Quan
No need to enable or disable AVFS if it's already in wanted state. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: valid Vega10 DPMTABLE_OD_UPDATE_VDDC settings V2Evan Quan
With user specified voltage(DPMTABLE_OD_UPDATE_VDDC), the AVFS will be disabled. However, the buggy code makes this actually not working as expected. - V2: clear all OD flags excpet DPMTABLE_OD_UPDATE_VDDC Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: fix Vega10 mclk/socclk voltage link setupEvan Quan
This may affects the Vega10 MCLK OD functionality. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: check no_user_fence flag for enginesLeo Liu
To replace checking ring type and make them generic Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu/VCN: set no_user_fence flag to trueLeo Liu
There is no user fence support for VCN Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu/VCE: set no_user_fence flag to trueLeo Liu
There is no user fence support for VCE Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu/UVD: set no_user_fence flag to trueLeo Liu
There is no user fence support for UVD Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: add no_user_fence flag to ring funcsLeo Liu
So we can generalize the no user fence supported engine Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: sdma handle ras resumexinhui pan
During S3/S4 bootloader will re-init ras state behind us. Resume might fail or raise a gpu reset. Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: gfx handle ras resumexinhui pan
During S3/S4 bootloader will re-init ras state behind us. Resume might fail or raise a gpu reset. Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: gmc handle ras resumexinhui pan
During S3/S4 bootloader will re-init ras state behind us. Resume might fail or raise a gpu reset. Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: enable ras suspend/resumexinhui pan
suspend/resume will change ras state behind us. Let driver get notified. Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: ras support suspend/resumexinhui pan
add ras suspend function. rename ras_post_init to amdgpu_ras_resume. Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Tested-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: add badpages sysfs interafcexinhui pan
add badpages node. it will output badpages list in format gpu pfn : gpu page size : flags example 0x00000000 : 0x00001000 : R 0x00000001 : 0x00001000 : R 0x00000002 : 0x00001000 : R 0x00000003 : 0x00001000 : R 0x00000004 : 0x00001000 : R 0x00000005 : 0x00001000 : R 0x00000006 : 0x00001000 : R 0x00000007 : 0x00001000 : P 0x00000008 : 0x00001000 : P 0x00000009 : 0x00001000 : P flags can be one of below characters R: reserved. P: pending for reserve. F: failed to reserve for some reasons. Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: Fix S3 test issueJames Zhu
During S3 test, when system wake up and resume, ras interface is already allocated. Move workaround before ras jumps to resume step in gfx_v9_0_ecc_late_init, and make sure workaround applied during resume. Also remove unused mmGB_EDC_MODE clearing. Signed-off-by: James Zhu <James.Zhu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Make some functions staticWang Hai
Fix the following sparse warnings: drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:483:21: warning: symbol 'dce120_clock_source_create' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:506:6: warning: symbol 'dce120_clock_source_destroy' was not declared. Should it be static? drivers/gpu/drm/amd/amdgpu/../display/dc/dce120/dce120_resource.c:513:6: warning: symbol 'dce120_hw_sequencer_create' was not declared. Should it be static? Fixes: b8fdfcc6a92c ("drm/amd/display: Add DCE12 core support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai26@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: RLC to program regs for Vega10 SR-IOVTrigger Huang
Under Vega10 SR-IOV, with new RLC's new feature, VF should call RLC to program some registers if supported Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: add basic func for RLC program regTrigger Huang
New feature for RLC, some registers can be programmed by RLC interface under SR-IOV VF: WREG32_SOC15_RLC_SHADOW: 1, for GRBM_GFX_CNTL, firstly the new register value should be be programmed to SCRATCH_REG2 1, for GRBM_GFX_INDEX, firstly the new register value should be be programmed to SCRATCH_REG3 WREG32_RLC: for registers supported to be programmed by RLC interface, the following sequence should be used: 1, write the value to SCRATCH_REG0 2, write reg | 0x80000000 to SCRATCH_REG1 3, write 0x1 to RLC_SPARE_INT to notify RLC 4, polling SCRATCH_REG1 to check if finished Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: Skip setting some regs under Vega10 VFTrigger Huang
For Vega10 SR-IOV VF, skip setting some regs due to: 1, host will program them 2, avoid VF register programming violations Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: Support PSP VMR ring for Vega10 VFTrigger Huang
Add VMR ring support for Vega10 SR-IOV VF if PSP supported Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: call psp to program ih cntl in SR-IOVTrigger Huang
call psp to program ih cntl in SR-IOV if supported Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: implement PSP cmd GFX_CMD_ID_PROG_REGTrigger Huang
Add implementation to program regs by PSP, currently the following IH registers are supported: IH_RB_CNTL IH_RB_CNTL_RING1 IH_RB_CNTL_RING2 Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: Add new PSP cmd GFX_CMD_ID_PROG_REGTrigger Huang
Add new PSP command GFX_CMD_ID_PROG_REG definition Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 02:04:44 +0000