summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-28drm/amdgpu: exit directly if gpu reset failsTao Zhou
No need to perform the full reset operation in case of gpu reset failure. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/pm: Disallow managing power profiles on SRIOV for gc11.0.3Victor Zhao
disable pp_power_profile_mode for sriov on gc11.0.3 as not supported by smu Signed-off-by: Victor Zhao <Victor.Zhao@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amdkfd: Fix a race condition of vram buffer unref in svm codeXiaogang Chen
prange->svm_bo unref can happen in both mmu callback and a callback after migrate to system ram. Both are async call in different tasks. Sync svm_bo unref operation to avoid random "use-after-free". Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com> Tested-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/display: Check all enabled planes in dm_check_crtc_cursorMichel Dänzer
It was only checking planes which had any state changes in the same commit. However, it also needs to check other enabled planes. Not doing this meant that a commit might spuriously "succeed", resulting in the cursor plane displaying with incorrect scaling. See https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3177#note_1824263 for an example. Fixes: d1bfbe8a3202 ("amd/display: check cursor plane matches underlying plane") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/display: Initialize writeback connectorAlex Hung
[WHAT] Create a drm_writeback_connector when connector signal equals SIGNAL_TYPE_VIRTUAL. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Move microcode init from sw_init to early_init for CIK SDMAMario Limonciello
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Move microcode init from sw_init to early_init for SDMA v2.4Mario Limonciello
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Move microcode init from sw_init to early_init for SDMA v3.0Mario Limonciello
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Move microcode init from sw_init to early_init for SDMA v5.2Mario Limonciello
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Move microcode init from sw_init to early_init for SDMA v6.0Mario Limonciello
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Move microcode init from sw_init to early_init for SDMA v5.0Mario Limonciello
As part of IP discovery early_init is run for all HW IP blocks. During this phase all firmware is supposed to be identified that may be missing so that the driver can avoid releasing resources used by the EFI framebuffer or simpledrm until the last possible moment. Move microcode loading from sw_init to early_init. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/display: Fix null pointer dereference in error messageCong Liu
This patch fixes a null pointer dereference in the error message that is printed when the Display Core (DC) fails to initialize. The original message includes the DC version number, which is undefined if the DC is not initialized. Fixes: 9788d087caff ("drm/amd/display: improve the message printed when loading DC") Signed-off-by: Cong Liu <liucong2@kylinos.cn> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/display: Create one virtual connector in DCHarry Wentland
[WHAT] Prepare a virtual connector for writeback. Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Drop error message about failing to load SDMA firmwareMario Limonciello
The error path for SDMA firmware loading is unnecessarily noisy. When a firmware is missing 3 errors show up: ``` amdgpu 0000:07:00.0: Direct firmware load for amdgpu/green_sardine_sdma.bin failed with error -2 [drm:sdma_v4_0_early_init [amdgpu]] *ERROR* Failed to load sdma firmware! [drm:amdgpu_device_init [amdgpu]] *ERROR* early_init of IP block <sdma_v4_0> failed -19 ``` The error code for the device init is bubbled up already, remove the second one. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/pm: fix the print_clk_levels issue for SMU v13.0.6Le Ma
Pass the correct size to smu_v13_0_6_print_clks, otherwise the same place in buf will be re-written. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/pm: deprecate allow_xgmi_power_down interfaceLe Ma
Replace with set_plpd_mode uniformly for places to use. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/pm: integrate plpd allow/disallow into select_xgmi_plpd_policy in ↵Le Ma
ppt level The allow_xgmi_power_down(true/false) will be generally replaced by: - allow: select_xgmi_plpd_policy(XGMI_PLPD_DEFAULT) - disallow: select_xgmi_plpd_policy(XGMI_PLPD_DISALLOW) Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/pm: init plpd_mode properly for different asicsLe Ma
Assign DEFAULT mode if it supports plpd, otherwise keeps NONE v2: reduce ip version checks Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/display: Remove unused DPCD declarationsStylon Wang
[Why & How] These DPCD addresses are either declared in other header files where it makes more sense or simply not used by any DC code. Remove them to reduce redundancies and potential confusion. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd/display: Skip entire amdgpu_dm build if !CONFIG_DRM_AMD_DCHarry Wentland
[WHY] Previously this only excluded build for a few amdgpu_dm binaries which makes no sense. [HOW] Wrap the entire Makefile in "ifneq ($(CONFIG_DRM_AMD_DC),)" Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-28drm/amd: Limit seamless boot by default to APUsMario Limonciello
A hang is reported on DCN 3.2 with seamless boot enabled. As the benefits come from an eDP setup, limit it to only enabled by default with APUs. Suggested-by: Alexander.Deucher@amd.com Reported-by: feifei.xu@amd.com Closes: https://lore.kernel.org/amd-gfx/85b427f6-11ec-4249-bf6f-eadf9c375f88@amd.com/T/#m2887e919d7c01b2a4860d2261b366d22e070f309 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd: Drop error message about failing to load DMUB firmwareMario Limonciello
The error path for DMUB firmware loading is unnecessarily noisy. When a firmware is missing 3 errors show up: ``` amdgpu 0000:07:00.0: Direct firmware load for amdgpu/green_sardine_dmcub.bin failed with error -2 [drm:dm_early_init [amdgpu]] *ERROR* DMUB firmware loading failed: -19 [drm:amdgpu_device_init [amdgpu]] *ERROR* early_init of IP block <dm> failed -19 ``` The error code for the device init is bubbled up already, remove the second one. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amdkfd: Handle errors from svm validate and mapPhilip Yang
If new range is splited to multiple pranges with max_svm_range_pages alignment and added to update_list, svm validate and map should keep going after error to make sure prange->mapped_to_gpu flag is up to date for the whole range. svm validate and map update set prange->mapped_to_gpu after mapping to GPUs successfully, otherwise clear prange->mapped_to_gpu flag (for update mapping case) instead of setting error flag, we can remove the redundant error flag to simpliy code. Refactor to remove goto and update prange->mapped_to_gpu flag inside svm_range_lock, to guarant we always evict queues or unmap from GPUs if there are invalid ranges. After svm validate and map return error -EAGIN, the caller retry will update the mapping for the whole range again. Fixes: c22b04407097 ("drm/amdkfd: flag added to handle errors from svm validate and map") Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: James Zhu <james.zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/pm: add xgmi_plpd_policy sysfs node for user to change plpd policyLe Ma
Add xgmi_plpd_policy sysfs node for users to check and select xgmi per-link power down policy: - arg 0: disallow plpd - arg 1: default policy - arg 2: optimized policy v2: split from smu v13.0.6 code and miscellaneous updates v3: add usage comments around set/get functions Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/pm: add xgmi plpd mode selecting interface for smu v13.0.6Le Ma
Add the interface to change xgmi per-link power down policy. v2: split from sysfs interface code and miscellaneous updates v3: check against XGMI_PLPD_DEFAULT/XGMI_PLPD_OPTIMIZED and pass PPSMC param Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/pm: add plpd_mode in smu_context to indicate current modeLe Ma
Add enum pp_xgmi_plpd_mode to describe PLPD policies. v2: move the enum from amdgpu_smu.h to kgd_pp_interface.h Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/pm: update pmfw headers for version 85.73.0Le Ma
To add message to select PLPD mode. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amdgpu: Add description for AMD_IP_BLOCK_TYPE_VPEJuntong Deng
AMD_IP_BLOCK_TYPE_VPE is a new IP BLOCK type for Video Processing Engine, but currently lacks description. Fix the documentation warning: warning: Enum value 'AMD_IP_BLOCK_TYPE_VPE' not described in enum 'amd_ip_block_type' Signed-off-by: Juntong Deng <juntong.deng@outlook.com> Reviewed-by: Lang Yu <lang.yu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: Change dc_set_power_state() to bool instead of intMario Limonciello
DC code is reused by other OSes and so Linux return codes don't make sense. Change dc_set_power_state() to boolean and add a wrapper dm_set_power_state() to return a Linux error code for the memory allocation failure. Suggested-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amdgpu/gmc11: disable AGP on GC 11.5Alex Deucher
AGP aperture is deprecated and no longer functional. v2: fix typo (Alex) v3: just skip the agp setup call v4: revert back to the original model v5: back to v3 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amdgpu: not to save bo in the case of RAS err_event_athubDavid (Ming Qiang) Wu
err_event_athub will corrupt VCPU buffer and not good to be restored in amdgpu_vcn_resume() and in this case the VCPU buffer needs to be cleared for VCN firmware to work properly. Acked-by: Leo Liu <leo.liu@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amdgpu: Fix a memory leakLuben Tuikov
Fix a memory leak in amdgpu_fru_get_product_info(). Cc: Alex Deucher <Alexander.Deucher@amd.com> Reported-by: Yang Wang <kevinyang.wang@amd.com> Fixes: 0dbf2c562625 ("drm/amdgpu: Interpret IPMI data for product information (v2)") Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd: Propagate failures in dc_set_power_state()Mario Limonciello
During the suspend process dc_set_power_state() will use kzalloc to allocate memory, but this potentially fails with memory pressure. If it fails, the suspend should be aborted. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2362 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: Harry.Wentland@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: set stream gamut remap matrix to MPC for DCN3+Melissa Wen
dc->caps.color.mpc.gamut_remap says there is a post-blending color block for gamut remap matrix for DCN3 HW family and newer versions. However, those drivers still follow DCN10 programming that remap stream gamut_remap_matrix to DPP (pre-blending). To enable pre-blending and post-blending gamut_remap matrix supports at the same time, set stream gamut_remap to MPC and plane gamut_remap to DPP for DCN families that support both. It was tested using IGT KMS color tests for DRM CRTC CTM property and it preserves test results. Signed-off-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amdgpu/gmc: set a default disable value for AGPAlex Deucher
To disable AGP, the start needs to be set to a higher value than the end. Set a default disable value for the AGP aperture and allow the IP specific GMC code to enable it selectively be calling amdgpu_gmc_agp_location(). Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amdgpu/gmc6-8: properly disable the AGP apertureAlex Deucher
The BOT register needs to be larger than the TOP register for this to be properly disabled. The lower 22 bits of the BOT address are always 0 and the lower 22 bits of the TOP register are always 1 so you need to make the upper bits of BOT larger than the upper bits of BOT. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amdgpu:Expose physical id of device in XGMI hiveMangesh Gadre
This identifies the physical ordering of devices in the hive v2: fix compilation issue Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: Break after finding supported vlevel for repopulateAlvin Lee
[Description] After repopulating pipes for a split / merge, we want to find the lowest vlevel that supports the desired mpc combine level. Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Reviewed-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: Update OPP counter from new interfaceHong-lu Cheng
[Description] Change to new interface for notifying OS of cursor support changes Reviewed-by: Gang Chu <gang.chu@amd.com> Reviewed-by: Jaina Han <jaina.han@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Hong-lu Cheng <hong-lu.cheng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: augment display clock in dc_cap structureMax Tseng
[Why] Allow dc report maximum display clock possible at vmin Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: 3.2.253Aric Cyr
This version brings along the following: - Fix incorrect odm change detection logic - Add primary pipe check when building slice table for dcn3x - Add get primary dpp pipe resource interface - Add missing function pointer for DCN321 resource - Rename DisableMinDispClkODM in dc_config - Break after finding supported vlevel for repopulate - Update OPP counter from new interface - Augment display clock in dc_cap structure - Improve code style on bios_parser2 - Skip audio config for virtual signal - Block MPO if it prevents pstate support - Fix DP2.0 timing sync - Improve x86 and dmub ips handshake - Remove guaranteed viewports limitation for odm - Add new windowed mpo odm minimal transition sequence - Reset stream slice count for new ODM policy - Determine fast update only before commit minimal transition state - Remove unused mmhub_reg_offsets Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: fix incorrect odm change detection logicWenjing Liu
[why] The current ODM change detection only compares first two ODM slices. If there are 4 ODM slices and the change is within the last two slices, the logic fails to detect ODM change and cause us to skip ODM programming unexpectedly. [how] Add a is ODM topology changed resource interface to check any ODM topology changes with a more generic method. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: add primary pipe check when building slice table for dcn3xWenjing Liu
[why] There is a corner use case where the same plane pointer can be added into dc state twice. In addition to plane state pointer check we also need to match primary pipe before identifying the same plane. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: add get primary dpp pipe resource interfaceWenjing Liu
[why] Need to have a helper function to find the primary dp pipe of the plane associated with a dpp pipe Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: add missing function pointer for DCN321 resourceWenjing Liu
[why] acquire_free_pipe_as_secondary_opp_head function pointer is not assigned. This causes ODM mode to be disabled after enabling windowed MPO ODM capability on DCN321. [how] assign the correct function to the function pointer. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: Rename DisableMinDispClkODM in dc_configGabe Teeger
[what and why] The logic for DisableMinDispClkODM is reversed now that odm is disabled by default. Renaming to EnableMinDispClkODM. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amdgpu/vpe: fix truncation warningsLang Yu
Fix truncation warnings. Fixes: 9d4346bdbc64 ("drm/amdgpu: add VPE 6.1.0 support") Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202309200028.aUVuM8os-lkp@intel.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: Improve code style on bios_parser2Rodrigo Siqueira
bios_parser2 uses space instead of tabs in multiple areas; this commit converts those spaces into tabs. It also removes some other small details. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: Remove unwanted drm edid referencesAlex Hung
[WHY] edid_override and drm_edid_override_connector_update, according to drm documentation, should not be referred outside drm_edid. [HOW] Remove and replace them accordingly. This can tested by IGT's kms_hdmi_inject test. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26drm/amd/display: switch DC over to the new DRM logging macrosHamza Mahfooz
For multi-GPU systems it is difficult to tell which GPU a particular message is being printed for and that is undesirable because it complicates debugging efforts. Also, the new macros allow us to enable logging for particular parts of the codebase more selectively (since we no longer need to throw everything at DRM_DEBUG_KMS()). So, for the reasons outlined above we should switch to the new macros. We can accomplish this by using the existing DC_LOGGER code to pass around the relevant `struct drm_device` which will be fed to the new macros in logger_types.h. Also, we must get rid of all instances of the DC_LOG_.*() functions that are currently in amdgpu_dm since we don't use the DC logger there and we can simply refer to the macros directly there instead. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 15:51:33 +0000