| Age | Commit message (Collapse) | Author |
|---|
|
Register errors interrupts for inline cptlf attached to PF driver
so that SMMU faults and other errors can be reported.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
HW has a errata that CPT HW may hit an issue, while processing CPT
instructions with CTX_VAL set and CTX_VAL not set. So, this patch
adds the code to always set the CTX_VAL as a workaround.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Updates CPT inbound inline IPsec configure mailbox to take
CPT credit threshold and bpid, which are introduced
in CN10KB.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
CPT LF must be reset and follow CPT LF disable sequence
suggested by HW team, when driver exits.
This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Adds code to not execute CPT errata "when CPT_AF_DIAG[FLT_DIS] = 0 and a
CPT engine access to LLC/DRAM encounters a fault/poison, a rare case
may result in unpredictable data being delivered to a CPT engine"
workaround on CN10KA B0/CN10KB HW as it is fixed on these chips.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On CN10KA B0/CN10KB, CPT scatter gather format has modified
to support multi-seg in inline IPsec. Due to this CPT requires
new firmware and doesn't work with CN10KA0/A1 firmware. To make
HW works in backward compatibility mode or works with CN10KA0/A1
firmware, a bit(T106_MODE) is introduced in HW CSR.
This patch adds devlink parameter for configuring T106_MODE.
This patch also documents the devlink parameter under
Documentation/crypto/device_drivers.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Scatter Gather input format for CPT has changed on CN10KB/CN10KA B0 HW
to make it compatible with NIX Scatter Gather format to support SG mode
for inline IPsec. This patch modifies the code to make the driver works
for the same. This patch also enables CPT firmware load for these chips.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
CPT block reset in CPT PF erase all the CPT configuration which is
done in AF driver init. So, remove CPT block reset from CPT PF as
it is also being done in AF init and not required in PF.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When ecb is used to wrap an lskcipher, the statesize isn't set
correctly. Fix this by making the simple instance creator set
the statesize.
Reported-by: syzbot+8ffb0839a24e9c6bfa76@syzkaller.appspotmail.com
Reported-by: Edward Adam Davis <eadavis@qq.com>
Fixes: 662ea18d089b ("crypto: skcipher - Make use of internal state")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
smatch warnings:
drivers/crypto/stm32/stm32-crc32.c:108 stm32_crc_get_next_crc() warn:
can 'crc' even be NULL?
Use list_first_entry_or_null instead of list_first_entry to retrieve
the first device registered.
The function list_first_entry always return a non NULL pointer even if
the list is empty. Hence checking if the pointer returned is NULL does
not tell if the list is empty or not.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202311281111.ou2oUL2i-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311281111.ou2oUL2i-lkp@intel.com/
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for 420xx devices by including a new device driver that
supports such devices, updates to the firmware loader and capabilities.
Compared to 4xxx devices, 420xx devices have more acceleration engines
(16 service engines and 1 admin) and support the wireless cipher
algorithms ZUC and Snow 3G.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Co-developed-by: Dong Xie <dong.xie@intel.com>
Signed-off-by: Dong Xie <dong.xie@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Relocate the structures adf_fw_objs and adf_fw_config from the file
adf_4xxx_hw_data.c to the newly created adf_fw_config.h.
These structures will be used by new device drivers.
This does not introduce any functional change.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move logic that is common between QAT GEN4 accelerators to the
qat_common folder. This includes addresses of CSRs, setters and
configuration logic.
When moved, functions and defines have been renamed from 4XXX to GEN4.
Code specific to the device is moved to the file adf_gen4_hw_data.c.
Code related to configuration is moved to the newly created
adf_gen4_config.c.
This does not introduce any functional change.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add accel_dev as parameter of the function uof_get_num_objs().
This is in preparation for the introduction of the QAT 420xx driver as
it will allow to reconfigure the ae_mask when a configuration that does
not require all AEs is loaded on the device.
This does not introduce any functional change.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move the function get_service_enabled() from adf_4xxx_hw_data.c to
adf_cfg_services.c and rename it as adf_get_service_enabled().
This function is not specific to the 4xxx and will be used by
other QAT drivers.
This does not introduce any functional change.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Document the crypto engine on the SM7280 Platform.
Signed-off-by: Om Prakash Singh <quic_omprsing@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the mpi_ec_ctx structure is initialized, some fields are not
cleared, causing a crash when referencing the field when the
structure was released. Initially, this issue was ignored because
memory for mpi_ec_ctx is allocated with the __GFP_ZERO flag.
For example, this error will be triggered when calculating the
Za value for SM2 separately.
Fixes: d58bb7e55a8a ("lib/mpi: Introduce ec implementation to MPI library")
Cc: stable@vger.kernel.org # v6.5
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All devices compatible with SM8150 QCE (so SM8250 and newer) do not have
clock inputs (clocks are handled by secure firmware), so explicitly
disallow the clocks in the bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Binding marks several devices as compatible with IPQ4019 QCE. They have
different number of clocks, thus the fallback does not define the
clock constraints per variant and each specific compatible should have
its clocks in if:then: section.
Add missing clocks description for IPQ9574 QCE.
Fixes: 1f5ce01d5d71 ("dt-bindings: crypto: qcom-qce: add SoC compatible string for ipq9574")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Define SET_RUNTIME_PM_OPS for StarFive TRNG driver.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add compatible string for StarFive JH8100 trng.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The scheduled tasklet needs to be executed on device remove.
Fixes: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet")
Signed-off-by: wangyangxin <wangyangxin1@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes following cleanup issues:
- Missing instruction queue free on cleanup. This
will lead to memory leak.
- lfs->lfs_num is set to zero before cleanup, which
will lead to improper cleanup.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add the printf of an error message and optimized the handling
process of ret.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Deleted a dbg function because this function has the risk of
address leakage. In addition, this function is only used for
debugging in the early stage and is not required in the future.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Disallow registration of two algorithms with identical driver names.
Cc: <stable@vger.kernel.org>
Reported-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a load_device_defaults() function pointer to struct
idxd_driver_data, which if defined, will be called when an idxd device
is probed and will allow the idxd device to be configured with default
values.
The load_device_defaults() function is passed an idxd device to work
with to set specific device attributes.
Also add a load_device_defaults() implementation IAA devices; future
patches would add default functions for other device types such as
DSA.
The way idxd device probing works, if the device configuration is
valid at that point e.g. at least one workqueue and engine is properly
configured then the device will be enabled and ready to go.
The IAA implementation, idxd_load_iaa_device_defaults(), configures a
single workqueue (wq0) for each device with the following default
values:
mode "dedicated"
threshold 0
size Total WQ Size from WQCAP
priority 10
type IDXD_WQT_KERNEL
group 0
name "iaa_crypto"
driver_name "crypto"
Note that this now adds another configuration step for any users that
want to configure their own devices/workqueus with something different
in that they'll first need to disable (in the case of IAA) wq0 and the
device itself before they can set their own attributes and re-enable,
since they've been already been auto-enabled. Note also that in order
for the new configuration to be applied to the deflate-iaa crypto
algorithm the iaa_crypto module needs to unregister the old version,
which is accomplished by removing the iaa_crypto module, and
re-registering it with the new configuration by reinserting the
iaa_crypto module.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support for optional debugfs statistics support for the IAA
Compression Accelerator. This is enabled by the kernel config item:
CRYPTO_DEV_IAA_CRYPTO_STATS
When enabled, the IAA crypto driver will generate statistics which can
be accessed at /sys/kernel/debug/iaa-crypto/.
See Documentation/driver-api/crypto/iax/iax-crypto.rst for details.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The existing iaa crypto async support provides an implementation that
satisfies the interface but does so in a synchronous manner - it fills
and submits the IDXD descriptor and then waits for it to complete
before returning. This isn't a problem at the moment, since all
existing callers (e.g. zswap) wrap any asynchronous callees in a
synchronous wrapper anyway.
This change makes the iaa crypto async implementation truly
asynchronous: it fills and submits the IDXD descriptor, then returns
immediately with -EINPROGRESS. It also sets the descriptor's 'request
completion irq' bit and sets up a callback with the IDXD driver which
is called when the operation completes and the irq fires. The
existing callers such as zswap use synchronous wrappers to deal with
-EINPROGRESS and so work as expected without any changes.
This mode can be enabled by writing 'async_irq' to the sync_mode
iaa_crypto driver attribute:
echo async_irq > /sys/bus/dsa/drivers/crypto/sync_mode
Async mode without interrupts (caller must poll) can be enabled by
writing 'async' to it:
echo async > /sys/bus/dsa/drivers/crypto/sync_mode
The default sync mode can be enabled by writing 'sync' to it:
echo sync > /sys/bus/dsa/drivers/crypto/sync_mode
The sync_mode value setting at the time the IAA algorithms are
registered is captured in each algorithm's crypto_ctx and used for all
compresses and decompresses when using a given algorithm.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch registers the deflate-iaa deflate compression algorithm and
hooks it up to the IAA hardware using the 'fixed' compression mode
introduced in the previous patch.
Because the IAA hardware has a 4k history-window limitation, only
buffers <= 4k, or that have been compressed using a <= 4k history
window, are technically compliant with the deflate spec, which allows
for a window of up to 32k. Because of this limitation, the IAA fixed
mode deflate algorithm is given its own algorithm name, 'deflate-iaa'.
With this change, the deflate-iaa crypto algorithm is registered and
operational, and compression and decompression operations are fully
enabled following the successful binding of the first IAA workqueue
to the iaa_crypto sub-driver.
when there are no IAA workqueues bound to the driver, the IAA crypto
algorithm can be unregistered by removing the module.
A new iaa_crypto 'verify_compress' driver attribute is also added,
allowing the user to toggle compression verification. If set, each
compress will be internally decompressed and the contents verified,
returning error codes if unsuccessful. This can be toggled with 0/1:
echo 0 > /sys/bus/dsa/drivers/crypto/verify_compress
The default setting is '1' - verify all compresses.
The verify_compress value setting at the time the algorithm is
registered is captured in the algorithm's crypto_ctx and used for all
compresses when using the algorithm.
[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Define an in-kernel API for adding and removing compression modes,
which can be used by kernel modules or other kernel code that
implements IAA compression modes.
Also add a separate file, iaa_crypto_comp_fixed.c, containing huffman
tables generated for the IAA 'fixed' compression mode. Future
compression modes can be added in a similar fashion.
One or more crypto compression algorithms will be created for each
compression mode, each of which can be selected as the compression
algorithm to be used by a particular facility.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The iaa compression/decompression algorithms in later patches need a
way to retrieve an appropriate IAA workqueue depending on how close
the associated IAA device is to the current cpu.
For this purpose, add a per-cpu array of workqueues such that an
appropriate workqueue can be retrieved by simply accessing the per-cpu
array.
Whenever a new workqueue is bound to or unbound from the iaa_crypto
driver, the available workqueues are 'rebalanced' such that work
submitted from a particular CPU is given to the most appropriate
workqueue available. There currently isn't any way for the user to
tweak the way this is done internally - if necessary, knobs can be
added later for that purpose. Current best practice is to configure
and bind at least one workqueue for each IAA device, but as long as
there is at least one workqueue configured and bound to any IAA device
in the system, the iaa_crypto driver will work, albeit most likely not
as efficiently.
[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The Intel Analytics Accelerator (IAA) is a hardware accelerator that
provides very high thoughput compression/decompression compatible with
the DEFLATE compression standard described in RFC 1951, which is the
compression/decompression algorithm exported by this module.
Users can select IAA compress/decompress acceleration by specifying
one of the deflate-iaa* algorithms as the compression algorithm to use
by whatever facility allows asynchronous compression algorithms to be
selected.
For example, zswap can select the IAA fixed deflate algorithm
'deflate-iaa' via:
# echo deflate-iaa > /sys/module/zswap/parameters/compressor
This patch adds iaa_crypto as an idxd sub-driver and tracks iaa
devices and workqueues as they are probed or removed.
[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Because the IAA Compression Accelerator requires significant user
setup in order to be used properly, this adds documentation on the
iaa_crypto driver including setup, usage, and examples.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Create a lightweight callback interface to allow idxd sub-drivers to
be notified when work sent to idxd wqs has completed.
For a sub-driver to be notified of work completion, it needs to:
- Set the descriptor's 'Request Completion Interrupt'
(IDXD_OP_FLAG_RCI)
- Set the sub-driver desc_complete() callback when registering the
sub-driver e.g.:
struct idxd_device_driver my_drv = {
.probe = my_probe,
.desc_complete = my_complete,
}
- Set the sub-driver-specific context in the sub-driver's descriptor
e.g:
idxd_desc->crypto.req = req;
idxd_desc->crypto.tfm = tfm;
idxd_desc->crypto.src_addr = src_addr;
idxd_desc->crypto.dst_addr = dst_addr;
When the work completes and the completion irq fires, idxd will invoke
the desc_complete() callback with pointers to the descriptor, context,
and completion_type.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add the accessors idxd_wq_set_private() and idxd_wq_get_private()
allowing users to set and retrieve a private void * associated with an
idxd_wq.
The private data is stored in the idxd_dev.conf_dev associated with
each idxd_wq.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To allow idxd sub-drivers to access the wq resource management
functions, export them.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
