| Age | Commit message (Collapse) | Author |
|---|
|
addr_doit() calls phonet_address_add() or phonet_address_del()
for RTM_NEWADDR or RTM_DELADDR, respectively.
Both functions only touch phonet_device_list(dev_net(dev)),
which is currently protected by RTNL and its dedicated mutex,
phonet_device_list.lock.
We will convert addr_doit() to RCU and cannot use mutex inside RCU.
Let's convert the mutex to spinlock_t.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, phonet_address_notify() fetches netns and ifindex from dev.
Once addr_doit() is converted to RCU, phonet_address_notify() will be
called outside of RCU due to GFP_KERNEL, and dev will be unavailable
there.
Let's pass net and ifindex to phonet_address_notify().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We will convert addr_doit() and getaddr_dumpit() to RCU, both
of which call fill_addr().
The former will call phonet_address_notify() outside of RCU
due to GFP_KERNEL, so dev will not be available in fill_addr().
Let's pass ifindex directly to fill_addr().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The notification handling in ynl is currently very simple, using sleep()
to wait a period of time and then handling all the buffered messages in
a single batch.
This patch changes the notification handling so that messages are
processed as they are received. This makes it possible to use ynl as a
library that supplies notifications in a timely manner.
- Change check_ntf() to be a generator that yields 1 notification at a
time and blocks until a notification is available.
- Use the --sleep parameter to set an alarm and exit when it fires.
This means that the CLI has the same interface, but notifications get
printed as they are received:
./tools/net/ynl/cli.py --spec <SPEC> --subscribe <TOPIC> [ --sleep <SECS> ]
Here is an example python snippet that shows how to use ynl as a library
for receiving notifications:
ynl = YnlFamily(f"{dir}/rt_route.yaml")
ynl.ntf_subscribe('rtnlgrp-ipv4-route')
for event in ynl.check_ntf():
handle(event)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20241018093228.25477-1-donald.hunter@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Russell King says:
====================
net: pcs: xpcs: yet more cleanups
I've found yet more potential for cleanups in the XPCS driver.
The first patch switches to using generic register definitions.
Next, there's an overly complex bit of code in xpcs_link_up_1000basex()
which can be simplified down to a simple if() statement.
Then, rearrange xpcs_link_up_1000basex() to separate out the warnings
from the functional bit.
Next, realising that the functional bit is just the helper function we
already have and are using in the SGMII version of this function,
switch over to that.
We can now see that xpcs_link_up_1000basex() and xpcs_link_up_sgmii()
are basically functionally identical except for the warnings, so merge
the two functions.
Next, xpcs_config_usxgmii() seems misnamed, so rename it to follow the
established pattern.
Lastly, "return foo();" where foo is a void function and the function
being returned from is also void is a weird programming pattern.
Replace this with something more conventional.
With these changes, we see yet another reduction in the amount of
code in this driver.
Tested-by: Serge Semin <fancer.lancer@gmail.com>
====================
Link: https://patch.msgid.link/ZxD6cVFajwBlC9eN@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While using "return" when calling a void returning function inside a
function that returns void doesn't cause a compiler warning, it looks
weird. Convert the bunch of if() statements to a switch() and remove
these return statements.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xpcs_config_usxgmii() is only called from the xpcs_link_up() method, so
let's name it similarly to the SGMII and 1000BASEX functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xpcs_link_up_sgmii() and xpcs_link_up_1000basex() are almost identical
with the exception of checking the speed and duplex for 1000BASE-X.
Combine the two functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We can now see that we have an open-coded version of
mii_bmcr_encode_fixed() when this is called with SPEED_1000:
val = BMCR_SPEED1000;
if (duplex == DUPLEX_FULL)
val |= BMCR_FULLDPLX;
Replace this with a call to mii_bmcr_encode_fixed().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rearrange xpcs_link_up_1000basex() to make it more obvious what will
happen in the following commit.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove an unnecessary switch() statement in xpcs_link_up_1000basex().
The only value this switch statement is interested in is SPEED_1000,
all other values lead to an error. Replace this with a simple if()
statement.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As a general policy, we refer our generic register definitions over
vendor specific definitions. In XPCS, it appears that the register
layout follows a BMCR, BMSR and ADVERTISE register definition. We
already refer to this BMCR register using several different macros
which is confusing.
Convert the following register definitions to generic versions:
DW_VR_MII_MMD_CTRL => MII_BMCR
MDIO_CTRL1 => MII_BMCR
AN_CL37_EN => BMCR_ANENABLE
SGMII_SPEED_SS6 => BMCR_SPEED1000
SGMII_SPEED_SS13 => BMCR_SPEED100
MDIO_CTRL1_RESET => BMCR_RESET
DW_VR_MII_MMD_STS => MII_BMSR
DW_VR_MII_MMD_STS_LINK_STS => BMSR_LSTATUS
DW_FULL_DUPLEX => ADVERTISE_1000XFULL
iDW_HALF_DUPLEX => ADVERTISE_1000XHALF
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There are a couple of attributes missing from the 'bitset' attribute-set
in the ethtool netlink spec. Add them to the spec.
Reported-by: Kory Maincent <kory.maincent@bootlin.com>
Closes: https://lore.kernel.org/netdev/20241017180551.1259bf5c@kmaincent-XPS-13-7390/
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20241018090630.22212-1-donald.hunter@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Change smp_mb() imediately following a set_bit()
with smp_mb__after_atomic().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241018052310.2612084-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
npinfo is not used in any of the ndo_netpoll_setup() methods.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241018052108.2610827-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Recently, commit 4a0ec2aa0704 ("ipv6: switch inet6_addr_hash()
to less predictable hash") and commit 4daf4dc275f1 ("ipv6: switch
inet6_acaddr_hash() to less predictable hash") hardened IPv6
address hash functions.
inet_addr_hash() is also highly predictable, and a malicious use
could abuse a specific bucket.
Let's follow the change on IPv4 by using jhash_1word().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241018014100.93776-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
kernel test robot reported a section mismatch in ip6_mr_cleanup().
WARNING: modpost: vmlinux: section mismatch in reference: ip6_mr_cleanup+0x0 (section: .text) -> 0xffffffff (section: .init.rodata)
WARNING: modpost: vmlinux: section mismatch in reference: ip6_mr_cleanup+0x14 (section: .text) -> ip6mr_rtnl_msg_handlers (section: .init.rodata)
ip6_mr_cleanup() uses ip6mr_rtnl_msg_handlers[] that has
__initconst_or_module qualifier.
ip6_mr_cleanup() is only called from inet6_init() but does
not have __init qualifier.
Let's add __init to ip6_mr_cleanup().
Fixes: 3ac84e31b33e ("ipmr: Use rtnl_register_many().")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410180139.B3HeemsC-lkp@intel.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241017174732.39487-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This isn't used outside act_api.c, but is called by tcf_dump_walker()
prior to its definition. So move it upwards and make it static.
Simultaneously, reorder the variable declarations so that they follow
the networking "reverse Christmas tree" coding style.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20241017161934.3599046-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Antoine Tenart says:
====================
net: sysctl: allow dump_cpumask to handle higher numbers of CPUs
The main goal of this series is to allow dump_cpumask to handle higher
numbers of CPUs (patch 3). While doing so I had the opportunity to make
the function a bit simpler, which is done in patches 1-2.
None of those is net material IMO.
====================
Link: https://patch.msgid.link/20241017152422.487406-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This fixes the output of rps_default_mask and flow_limit_cpu_bitmap when
the CPU count is > 448, as it was truncated.
The underlying values are actually stored correctly when writing to
these sysctl but displaying them uses a fixed length temporary buffer in
dump_cpumask. This buffer can be too small if the CPU count is > 448.
Fix this by dynamically allocating the buffer in dump_cpumask, using a
guesstimate of what we need.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When computing the length we'll be able to use out of the buffers, one
char is removed from the temporary one to make room for a newline. It
should be removed from the output buffer length too, but in reality this
is not needed as the later call to scnprintf makes sure a null char is
written at the end of the buffer which we override with the newline.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before adding a new line at the end of the temporary buffer in
dump_cpumask, a length check is performed to ensure there is space for
it.
len = min(sizeof(kbuf) - 1, *lenp);
len = scnprintf(kbuf, len, ...);
if (len < *lenp)
kbuf[len++] = '\n';
Note that the check is currently logically wrong, the written length is
compared against the output buffer, not the temporary one. However this
has no consequence as this is always true, even if fixed: scnprintf
includes a null char at the end of the buffer but the returned length do
not include it and there is always space for overriding it with a
newline.
Remove the condition.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
sock_{,re}set_flag() are contained in sock_valbool_flag(),
it would be cleaner to just use sock_valbool_flag().
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://patch.msgid.link/20241017133435.2552-1-yajun.deng@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 02b34d03a24b ("netdevsim: add dummy macsec offload") pads u64
number to 8 characters using "%08llx" format specifier.
Changing format specifier to "%016llx" ensures that no matter the value
the representation of number in log is always the same length.
Before this patch, entry in log for value '1' would say:
removing SecY with SCI 00000001 at index 2
After this patch is applied, entry in log will say:
removing SecY with SCI 0000000000000001 at index 2
Signed-off-by: Ales Nezbeda <anezbeda@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20241017131933.136971-1-anezbeda@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Allows simplifying get_strings and avoids manual pointer manipulation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Message-ID: <20241018200522.12506-1-rosenp@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Add support for reading SFP module info and digital diagnostic
monitoring data if supported by the module. The only Aquantia
controller without an integrated PHY is the AQC100 which belongs to
the B0 revision, that's why it's only implemented there.
The register information was extracted from a diagnostic tool made
publicly available by Dell, but all code was written from scratch by me.
This has been tested to work with a variety of both optical and direct
attach modules I had lying around and seems to work fine with all of
them, including the diagnostics if supported by an optical module.
All tests have been done with an AQC100 on an TL-NT521F card on firmware
version 3.1.121 (current at the time of this patch).
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Reviewed-by: Simon Horman <horms@kernel.org>
Message-ID: <20241018171721.2577386-1-lorenz@brun.one>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Add error pointer check after calling otx2_mbox_get_rsp().
Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Add error pointer checks after calling otx2_mbox_get_rsp().
Fixes: 79d2be385e9e ("octeontx2-pf: offload DMAC filters to CGX/RPM block")
Fixes: fa5e0ccb8f3a ("octeontx2-pf: Add support for exact match table.")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Add error pointer check after calling otx2_mbox_get_rsp().
Fixes: 2ca89a2c3752 ("octeontx2-pf: TC_MATCHALL ingress ratelimiting offload")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Adding error pointer check after calling otx2_mbox_get_rsp().
Fixes: 9917060fc30a ("octeontx2-pf: Cleanup flow rule management")
Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters")
Fixes: 674b3e164238 ("octeontx2-pf: Add additional checks while configuring ucast/bcast/mcast rules")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Add error pointer check after calling otx2_mbox_get_rsp().
Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool")
Fixes: d0cf9503e908 ("octeontx2-pf: ethtool fec mode support")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
Add error pointer check after calling otx2_mbox_get_rsp().
Fixes: ab58a416c93f ("octeontx2-pf: cn10k: Get max mtu supported from admin function")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
|
|
The kernel test robot reported a build failure on m68k in the intel
driver due to the recent shapers-related changes.
The mentioned arch has funny alignment properties, let's be explicit
about the binary layout expectation introducing a padding field.
Fixes: 608a5c05c39b ("virtchnl: support queue rate limit and quanta size configuration")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410131710.71Wt6LKO-lkp@intel.com/
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/e45d1c9f17356d431b03b419f60b8b763d2ff768.1729000481.git.pabeni@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Breno Leitao says:
====================
net: netconsole refactoring and warning fix
The netconsole driver was showing a warning related to userdata
information, depending on the message size being transmitted:
------------[ cut here ]------------
WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0
? write_ext_msg+0x3b6/0x3d0
console_flush_all+0x1e9/0x330
...
Identifying the cause of this warning proved to be non-trivial due to:
* The write_ext_msg() function being over 100 lines long
* Extensive use of pointer arithmetic
* Inconsistent naming conventions and concept application
The send_ext_msg() function grew organically over time:
* Initially, the UDP packet consisted of a header and body
* Later additions included release prepend and userdata
* Naming became inconsistent (e.g., "body" excludes userdata, "header"
excludes prepended release)
This lack of consistency made investigating issues like the above warning
more challenging than what it should be.
To address these issues, the following steps were taken:
* Breaking down write_ext_msg() into smaller functions with clear scopes
* Improving readability and reasoning about the code
* Simplifying and clarifying naming conventions
Warning Fix
-----------
The warning occurred when there was insufficient buffer space to append
userdata. While this scenario is acceptable (as userdata can be sent in a
separate packet later), the kernel was incorrectly raising a warning. A
one-line fix has been implemented to resolve this issue.
The fix was already sent to net, and is already available in net-next
also.
v4:
* https://lore.kernel.org/all/20240930131214.3771313-1-leitao@debian.org/
v3:
* https://lore.kernel.org/all/20240910100410.2690012-1-leitao@debian.org/
v2:
* https://lore.kernel.org/all/20240909130756.2722126-1-leitao@debian.org/
v1:
* https://lore.kernel.org/all/20240903140757.2802765-1-leitao@debian.org/
====================
Link: https://patch.msgid.link/20241017095028.3131508-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Refactor the send_msg_fragmented() function by extracting the logic for
sending the message body into a new function called
send_fragmented_body().
Now, send_msg_fragmented() handles appending the release and header, and
then delegates the task of breaking up the body and sending the
fragments to send_fragmented_body().
This is the final flow now:
When send_ext_msg_udp() is called to send a message, it will:
- call send_msg_no_fragmentation() if no fragmentation is needed
or
- call send_msg_fragmented() if fragmentation is needed
* send_msg_fragmented() appends the header to the buffer, which is
be persisted until the function returns
* call send_fragmented_body() to iterate and populate the body of
the message. It will not touch the header, and it will only
replace the body, writing the msgbody and/or userdata.
Also add some comment to make the code easier to review.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Do not pass userdata to send_msg_fragmented, since we can get it later.
This will be more useful in the next patch, where send_msg_fragmented()
will be split even more, and userdata is only necessary in the last
function.
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Refactor the code by extracting the logic for appending the
release into the buffer into a separate function.
The goal is to reduce the size of send_msg_fragmented() and improve
code readability.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current check to determine if the message body was fully sent is
difficult to follow. To improve clarity, introduce a variable that
explicitly tracks whether the message body (msgbody) has been completely
sent, indicating when it's time to begin sending userdata.
Additionally, add comments to make the code more understandable for
others who may work with it.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This new variable tracks the total length of the data to be sent,
encompassing both the message body (msgbody) and userdata, which is
collectively called body.
By explicitly defining body_len, the code becomes clearer and easier to
reason about, simplifying offset calculations and improving overall
readability of the function.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
With the introduction of the userdata concept, the term body has become
ambiguous and less intuitive.
To improve clarity, body is renamed to msg_body, making it clear that
the body is not the only content following the header.
In an upcoming patch, the term body_len will also be revised for further
clarity.
The current packet structure is as follows:
release, header, body, [msg_body + userdata]
Here, [msg_body + userdata] collectively forms what is currently
referred to as "body." This renaming helps to distinguish and better
understand each component of the packet.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Following the previous change, where the non-fragmented case was moved
to its own function, this update introduces a new function called
send_msg_fragmented to specifically manage scenarios where message
fragmentation is required.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The send_ext_msg_udp() function has become quite large, currently
spanning 102 lines. Its complexity, along with extensive pointer and
offset manipulation, makes it difficult to read and error-prone.
The function has evolved over time, and it’s now due for a refactor.
To improve readability and maintainability, isolate the case where no
message fragmentation occurs into a separate function, into a new
send_msg_no_fragmentation() function. This scenario covers about 95% of
the messages.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Variable msg_ready is useless, since it does not represent anything. Get
rid of it, using buf directly instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Change ynl-gen-c.py to use NLA_BE16 and NLA_BE32 types to represent
big-endian u16 and u32 ynl types.
Doing this enables those attributes to have range checks applied, as
the validator will then convert to host endianness prior to validation.
The autogenerated kernel/uapi code have been regenerated by running:
./tools/net/ynl/ynl-regen.sh -f
This changes the policy types of the following attributes:
FOU_ATTR_PORT (NLA_U16 -> NLA_BE16)
FOU_ATTR_PEER_PORT (NLA_U16 -> NLA_BE16)
These two are used with nla_get_be16/nla_put_be16().
MPTCP_PM_ADDR_ATTR_ADDR4 (NLA_U32 -> NLA_BE32)
This one is used with nla_get_in_addr/nla_put_in_addr(),
which uses nla_get_be32/nla_put_be32().
IOWs the generated changes are AFAICT aligned with their implementations.
The generated userspace code remains identical, and have been verified
by comparing the output generated by the following command:
make -C tools/net/ynl/generated
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241017094704.3222173-1-ast@fiberby.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Petr Machata says:
====================
selftests: net: Introduce deferred commands
Recently, a defer helper was added to Python selftests. The idea is to keep
cleanup commands close to their dirtying counterparts, thereby making it
more transparent what is cleaning up what, making it harder to miss a
cleanup, and make the whole cleanup business exception safe. All these
benefits are applicable to bash as well, exception safety can be
interpreted in terms of safety vs. a SIGINT.
This patchset therefore introduces a framework of several helpers that
serve to schedule cleanups in bash selftests.
- Patch #1 has more details about the primitives being introduced.
Patch #2 adds a fallback cleanup() function to lib.sh, because ideally
selftests wouldn't need to introduce a dedicated cleanup function at all.
- Patch #3 adds a parameter to stop_traffic(), which makes it possible to
start other background processes after the traffic is started without
confusing the cleanup.
- Patches #4 to #10 convert a number of selftests.
The goal was to convert all tests that use start_traffic / stop_traffic
to the defer framework. Leftover traffic generators are a particularly
painful sort of a missed cleanup. Normal unfinished cleanups can usually
be cleaned up simply by rerunning the test and interrupting it early to
let the cleanups run again / in full. This does not work with
stop_traffic, because it is only issued at the end of the test case that
starts the traffic. At the same time, leftover traffic generators
influence follow-up test runs, and are hard to notice.
The tests were however converted whole-sale, not just their traffic bits.
Thus they form a proof of concept of the defer framework.
====================
Link: https://patch.msgid.link/cover.1729157566.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the defer framework to schedule cleanups as soon as the command is
executed.
Note that the start_traffic commands in __burst_test() are each sending a
fixed number of packets (note the -c flag) and then ending. They therefore
do not need a matching stop_traffic.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
