| Age | Commit message (Collapse) | Author |
|---|
|
Andrew and Nikolay reported connectivity issues with Cilium's service
load-balancing in case of vmxnet3.
If a BPF program for native XDP adds an encapsulation header such as
IPIP and transmits the packet out the same interface, then in case
of vmxnet3 a corrupted packet is being sent and subsequently dropped
on the path.
vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp()
through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address:
page = virt_to_page(xdpf->data);
tbi->dma_addr = page_pool_get_dma_addr(page) +
VMXNET3_XDP_HEADROOM;
dma_sync_single_for_device(&adapter->pdev->dev,
tbi->dma_addr, buf_size,
DMA_TO_DEVICE);
The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP
BPF program could have moved xdp->data. While the passed buf_size is
correct (xdpf->len), the dma_addr needs to have a dynamic offset which
can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data -
xdp->data_hard_start.
Fixes: 54f00cce1178 ("vmxnet3: Add XDP support.")
Reported-by: Andrew Sauber <andrew.sauber@isovalent.com>
Reported-by: Nikolay Nikolaev <nikolay.nikolaev@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Nikolay Nikolaev <nikolay.nikolaev@isovalent.com>
Acked-by: Anton Protopopov <aspsk@isovalent.com>
Cc: William Tu <witu@nvidia.com>
Cc: Ronak Doshi <ronak.doshi@broadcom.com>
Link: https://patch.msgid.link/a0888656d7f09028f9984498cc698bb5364d89fc.1728931137.git.daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Daniel Zahka says:
====================
ethtool: rss: track rss ctx busy from core
This series prevents deletion of rss contexts that are
in use by ntuple filters from ethtool core.
====================
Link: https://patch.msgid.link/20241011183549.1581021-1-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It should be invalid to delete an rss context while it is being
referenced from an ntuple filter. ethtool core should prevent this
from happening. This patch adds a testcase to verify this behavior.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ntuple filters can specify an rss context to use for packet hashing
and queue selection. When a filter is referencing an rss context, it
should be invalid for that context to be deleted. A list of active
ntuple filters and their associated rss contexts can be compiled by
querying a device's ethtool_ops.get_rxnfc. This patch checks to see if
any ntuple filters are referencing an rss context during context
deletion, and prevents the deletion if the requested context is still
in use.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Clear 1000Base-T link partner advertisement bits in Clause-45
read_status() function in case auto-negotiation is disabled or has not
been completed.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/9dc9b47b2d675708afef3ad366bfd78eb584d958.1728565530.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Always call rtlgen_read_status() first, so genphy_read_status() which
is called by it clears bits in case auto-negotiation has not completed.
Also clear 10GBT link-partner advertisement bits in case auto-negotiation
is disabled or has not completed.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/b15929a41621d215c6b2b57393368086589569ec.1728565530.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The PHYSR MMD register is present and defined equally for all RTL82xx
Ethernet PHYs.
Read duplex and Gbit master bits from rtlgen_decode_speed() and rename
it to rtlgen_decode_physr().
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/b9a76341da851a18c985bc4774fa295babec79bb.1728565530.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Several miscellaneous fixes. A lot of bnxt_re activity, there will be
more rc patches there coming.
- Many bnxt_re bug fixes - Memory leaks, kasn, NULL pointer deref,
soft lockups, error unwinding and some small functional issues
- Error unwind bug in rdma netlink
- Two issues with incorrect VLAN detection for iWarp
- skb_splice_from_iter() splat in siw
- Give SRP slab caches unique names to resolve the merge window
WARN_ON regression"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: Fix the GID table length
RDMA/bnxt_re: Fix a bug while setting up Level-2 PBL pages
RDMA/bnxt_re: Change the sequence of updating the CQ toggle value
RDMA/bnxt_re: Fix an error path in bnxt_re_add_device
RDMA/bnxt_re: Avoid CPU lockups due fifo occupancy check loop
RDMA/bnxt_re: Fix a possible NULL pointer dereference
RDMA/bnxt_re: Return more meaningful error
RDMA/bnxt_re: Fix incorrect dereference of srq in async event
RDMA/bnxt_re: Fix out of bound check
RDMA/bnxt_re: Fix the max CQ WQEs for older adapters
RDMA/srpt: Make slab cache names unique
RDMA/irdma: Fix misspelling of "accept*"
RDMA/cxgb4: Fix RDMA_CM_EVENT_UNREACHABLE error for iWARP
RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES
RDMA/core: Fix ENODEV error for iWARP test over vlan
RDMA/nldev: Fix NULL pointer dereferences issue in rdma_nl_notify_event
RDMA/bnxt_re: Fix the max WQEs used in Static WQE mode
RDMA/bnxt_re: Add a check for memory allocation
RDMA/bnxt_re: Fix incorrect AVID type in WQE structure
RDMA/bnxt_re: Fix a possible memory leak
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- regression fix: dirty extents tracked in xarray for qgroups must be
adjusted for 32bit platforms
- fix potentially freeing uninitialized name in fscrypt structure
- fix warning about unneeded variable in a send callback
* tag 'for-6.12-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix uninitialized pointer free on read_alloc_one_name() error
btrfs: send: cleanup unneeded return variable in changed_verity()
btrfs: fix uninitialized pointer free in add_inode_ref()
btrfs: use sector numbers as keys for the dirty extents xarray
|
|
Pull smb server fixes from Steve French:
- fix race between session setup and session logoff
- add supplementary group support
* tag 'v6.12-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add support for supplementary groups
ksmbd: fix user-after-free from session log off
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Remove bogus testmgr ENOENT error messages
- Ensure algorithm is still alive before marking it as tested
- Disable buggy hash algorithms in marvell/cesa
* tag 'v6.12-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: marvell/cesa - Disable hash algorithms
crypto: testmgr - Hide ENOENT errors better
crypto: api - Fix liveliness check in crypto_alg_tested
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- More issues reported in the enable/disable paths on large machines
with many tasks due to scx_tasks_lock being held too long. Break up
the task iterations
- Remove ops.select_cpu() dependency in bypass mode so that a
misbehaving implementation can't live-lock the machine by pushing all
tasks to few CPUs in bypass mode
- Other misc fixes
* tag 'sched_ext-for-6.12-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Remove unnecessary cpu_relax()
sched_ext: Don't hold scx_tasks_lock for too long
sched_ext: Move scx_tasks_lock handling into scx_task_iter helpers
sched_ext: bypass mode shouldn't depend on ops.select_cpu()
sched_ext: Move scx_buildin_idle_enabled check to scx_bpf_select_cpu_dfl()
sched_ext: Start schedulers with consistent p->scx.slice values
Revert "sched_ext: Use shorter slice while bypassing"
sched_ext: use correct function name in pick_task_scx() warning message
selftests: sched_ext: Add sched_ext as proper selftest target
|
|
Kuniyuki Iwashima says:
====================
rtnetlink: Use rtnl_register_many().
This series converts all rtnl_register() and rtnl_register_module()
to rtnl_register_many() and finally removes them.
Once this series is applied, I'll start converting doit() to per-netns
RTNL.
v1: https://lore.kernel.org/20241011220550.46040-1-kuniyu@amazon.com/
====================
Link: https://patch.msgid.link/20241014201828.91221-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No one uses rtnl_register() and rtnl_register_module().
Let's remove them.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-12-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register_module() in favour of rtnl_register_many().
rtnl_register_many() will unwind the previous successful registrations
on failure and simplify module error handling.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-11-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() in favour of rtnl_register_many().
When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-10-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() and rtnl_register_module() in favour
of rtnl_register_many().
When it succeeds for built-in callers, rtnl_register_many() guarantees
all rtnetlink types in the passed array are supported, and there is no
chance that a part of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register_module() in favour of rtnl_register_many().
rtnl_register_many() will unwind the previous successful registrations
on failure and simplify module error handling.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() in favour of rtnl_register_many().
When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() in favour of rtnl_register_many().
When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() in favour of rtnl_register_many().
When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20241014201828.91221-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() in favour of rtnl_register_many().
When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will remove rtnl_register() in favour of rtnl_register_many().
When it succeeds, rtnl_register_many() guarantees all rtnetlink types
in the passed array are supported, and there is no chance that a part
of message types is not supported.
Let's use rtnl_register_many() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241014201828.91221-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We will replace all rtnl_register() and rtnl_register_module() with
rtnl_register_many().
Currently, rtnl_register() returns nothing and prints an error message
when it fails to register a rtnetlink message type and handlers.
The failure happens only when rtnl_register_internal() fails to allocate
rtnl_msg_handlers[protocol][msgtype], but it's unlikely for built-in
callers on boot time.
rtnl_register_many() unwinds the previous successful registrations on
failure and returns an error, but it will be useless for built-in callers,
especially some subsystems that do not have the legacy ioctl() interface
and do not work without rtnetlink.
Instead of booting up without rtnetlink functionality, let's panic on
failure for built-in rtnl_register_many() callers.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014201828.91221-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Harshitha Ramamurthy says:
====================
gve: adopt page pool
This patchset implements page pool support for gve.
The first patch deals with movement of code to make
page pool adoption easier in the next patch. The
second patch adopts the page pool API. The third patch
adds basic per queue stats which includes page pool
allocation failures as well.
====================
Link: https://patch.msgid.link/20241014202108.1051963-1-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement netdev_stats_ops to export basic per-queue stats.
With page pool support for DQO added in the previous patches,
rx-alloc-fail captures failures in page pool allocations as
well since the rx_buf_alloc_fail stat tracked in the driver
is incremented when gve_alloc_buffer returns error.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241014202108.1051963-4-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For DQ queue format in raw DMA addressing(RDA) mode,
implement page pool recycling of buffers by leveraging
a few helper functions.
DQ QPL mode will continue to use the exisiting recycling
logic. This is because in QPL mode, the pages come from a
constant set of pages that the driver pre-allocates and
registers with the device.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241014202108.1051963-3-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for the upcoming page pool adoption for DQO
raw addressing mode, move RX buffer management code to a new
file. In the follow on patches, page pool code will be added
to this file.
No functional change, just movement of code.
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241014202108.1051963-2-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ignat Korchagin says:
====================
do not leave dangling sk pointers in pf->create functions
Some protocol family create() implementations have an error path after
allocating the sk object and calling sock_init_data(). sock_init_data()
attaches the allocated sk object to the sock object, provided by the
caller.
If the create() implementation errors out after calling sock_init_data(),
it releases the allocated sk object, but the caller ends up having a
dangling sk pointer in its sock object on return. Subsequent manipulations
on this sock object may try to access the sk pointer, because it is not
NULL thus creating a use-after-free scenario.
We have implemented a stable hotfix in commit 631083143315
("net: explicitly clear the sk pointer, when pf->create fails"), but this
series aims to fix it properly by going through each of the pf->create()
implementations and making sure they all don't return a sock object with
a dangling pointer on error.
====================
Link: https://patch.msgid.link/20241014153808.51894-1-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 6cd4a78d962bebbaf8beb7d2ead3f34120e3f7b2.
inet/inet6->create() implementations have been fixed to explicitly NULL the
allocated sk object on error.
A warning was put in place to make sure any future changes will not leave
a dangling pointer in pf->create() implementations.
So this code is now redundant.
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-10-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All pf->create implementations have been fixed now to clear sock->sk on
error, when they deallocate the allocated sk object.
Put a warning in place to make sure we don't break this promise in the
future.
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-9-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sock_init_data() attaches the allocated sk pointer to the provided sock
object. If inet6_create() fails later, the sk object is released, but the
sock object retains the dangling sk pointer, which may cause use-after-free
later.
Clear the sock sk pointer on error.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-8-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sock_init_data() attaches the allocated sk object to the provided sock
object. If inet_create() fails later, the sk object is freed, but the
sock object retains the dangling pointer, which may create use-after-free
later.
Clear the sk pointer in the sock object on error.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-7-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sock_init_data() attaches the allocated sk object to the provided sock
object. If ieee802154_create() fails later, the allocated sk object is
freed, but the dangling pointer remains in the provided sock object, which
may allow use-after-free.
Clear the sk pointer in the sock object on error.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-6-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On error can_create() frees the allocated sk object, but sock_init_data()
has already attached it to the provided sock object. This will leave a
dangling sk pointer in the sock object and may cause use-after-free later.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20241014153808.51894-5-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bt_sock_alloc() attaches allocated sk object to the provided sock object.
If rfcomm_dlc_alloc() fails, we release the sk object, but leave the
dangling pointer in the sock object, which may cause use-after-free.
Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc().
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-4-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
l2cap_sock_create()
bt_sock_alloc() allocates the sk object and attaches it to the provided
sock object. On error l2cap_sock_alloc() frees the sk object, but the
dangling pointer is still attached to the sock object, which may create
use-after-free in other code.
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-3-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After sock_init_data() the allocated sk object is attached to the provided
sock object. On error, packet_create() frees the sk object leaving the
dangling pointer in the sock object on return. Some other code may try
to use this pointer and cause use-after-free.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241014153808.51894-2-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to the situation described for sja1105 in commit 1f9fc48fd302
("net: dsa: sja1105: fix reception from VLAN-unaware bridges"), the
vsc73xx driver uses tag_8021q and doesn't need the ds->untag_bridge_pvid
request. In fact, this option breaks packet reception.
The ds->untag_bridge_pvid option strips VLANs from packets received on
VLAN-unaware bridge ports. But those VLANs should already be stripped
by tag_vsc73xx_8021q.c as part of vsc73xx_rcv() - they are not VLANs in
VLAN-unaware mode, but DSA tags. Thus, dsa_software_vlan_untag() tries
to untag a VLAN that doesn't exist, corrupting the packet.
Fixes: 93e4649efa96 ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges")
Tested-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20241014153041.1110364-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent work moving the reporting of Rx software timestamps to the core
[1] highlighted an issue where hardware time stamping was advertised
for the platforms where it is not supported.
Fix this by covering advertising support for hardware timestamps only if
the hardware supports it. Due to the Tx implementation in RAVB software
Tx timestamping is also only considered if the hardware supports
hardware timestamps. This should be addressed in future, but this fix
only reflects what the driver currently implements.
1. Commit 277901ee3a26 ("ravb: Remove setting of RX software timestamp")
Fixes: 7e09a052dc4e ("ravb: Exclude gPTP feature support for RZ/G2L")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Tested-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://patch.msgid.link/20241014124343.3875285-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in
kunit test") fixed the use-after-free error, but introduced below
memory leaks by removing necessary vcap_free_rule(), add it to fix it.
unreferenced object 0xffffff80ca58b700 (size 192):
comm "kunit_try_catch", pid 1215, jiffies 4294898264
hex dump (first 32 bytes):
00 12 7a 00 05 00 00 00 0a 00 00 00 64 00 00 00 ..z.........d...
00 00 00 00 00 00 00 00 00 04 0b cc 80 ff ff ff ................
backtrace (crc 9c09c3fe):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<0000000040a01b8d>] vcap_alloc_rule+0x3cc/0x9c4
[<000000003fe86110>] vcap_api_encode_rule_test+0x1ac/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80cc0b0400 (size 64):
comm "kunit_try_catch", pid 1215, jiffies 4294898265
hex dump (first 32 bytes):
80 04 0b cc 80 ff ff ff 18 b7 58 ca 80 ff ff ff ..........X.....
39 00 00 00 02 00 00 00 06 05 04 03 02 01 ff ff 9...............
backtrace (crc daf014e9):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528
[<00000000dfdb1e81>] vcap_api_encode_rule_test+0x224/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80cc0b0700 (size 64):
comm "kunit_try_catch", pid 1215, jiffies 4294898265
hex dump (first 32 bytes):
80 07 0b cc 80 ff ff ff 28 b7 58 ca 80 ff ff ff ........(.X.....
3c 00 00 00 00 00 00 00 01 2f 03 b3 ec ff ff ff <......../......
backtrace (crc 8d877792):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000006eadfab7>] vcap_rule_add_action+0x2d0/0x52c
[<00000000323475d1>] vcap_api_encode_rule_test+0x4d4/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80cc0b0900 (size 64):
comm "kunit_try_catch", pid 1215, jiffies 4294898266
hex dump (first 32 bytes):
80 09 0b cc 80 ff ff ff 80 06 0b cc 80 ff ff ff ................
7d 00 00 00 01 00 00 00 00 00 00 00 ff 00 00 00 }...............
backtrace (crc 34181e56):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528
[<00000000991e3564>] vcap_val_rule+0xcf0/0x13e8
[<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
unreferenced object 0xffffff80cc0b0980 (size 64):
comm "kunit_try_catch", pid 1215, jiffies 4294898266
hex dump (first 32 bytes):
18 b7 58 ca 80 ff ff ff 00 09 0b cc 80 ff ff ff ..X.............
67 00 00 00 00 00 00 00 01 01 74 88 c0 ff ff ff g.........t.....
backtrace (crc 275fd9be):
[<0000000052a0be73>] kmemleak_alloc+0x34/0x40
[<0000000043605459>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000000ff63fd4>] vcap_rule_add_key+0x2cc/0x528
[<000000001396a1a2>] test_add_def_fields+0xb0/0x100
[<000000006e7621f0>] vcap_val_rule+0xa98/0x13e8
[<00000000fc9868e5>] vcap_api_encode_rule_test+0x678/0x16b0
[<00000000b3595fc4>] kunit_try_run_case+0x13c/0x3ac
[<0000000010f5d2bf>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000c5d82c9a>] kthread+0x2e8/0x374
[<00000000f4287308>] ret_from_fork+0x10/0x20
......
Cc: stable@vger.kernel.org
Fixes: a3c1e45156ad ("net: microchip: vcap: Fix use-after-free error in kunit test")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20241014121922.1280583-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The subsequent calculation of port_rate = speed * 1000 * BYTES_PER_KBIT,
where the BYTES_PER_KBIT is of type LL, may cause an overflow.
At least when speed = SPEED_20000, the expression to the left of port_rate
will be greater than INT_MAX.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Elena Salomatkina <esalomatkina@ispras.ru>
Link: https://patch.msgid.link/20241013124529.1043-1-esalomatkina@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Linus Walleij says:
====================
net: phy: mdio-bcm-unimac: Add BCM6846 variant
As pointed out by Florian:
https://lore.kernel.org/linux-devicetree/b542b2e8-115c-4234-a464-e73aa6bece5c@broadcom.com/
The BCM6846 has a few extra registers and cannot reuse the
compatible string from other variants of the Unimac
MDIO block: we need to be able to tell them apart.
====================
Link: https://patch.msgid.link/20241012-bcm6846-mdio-v1-0-c703ca83e962@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add Unimac mdio compatible string for the special BCM6846
variant.
This variant has a few extra registers compared to other
versions.
Suggested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/linux-devicetree/b542b2e8-115c-4234-a464-e73aa6bece5c@broadcom.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20241012-bcm6846-mdio-v1-2-c703ca83e962@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MDIO block in the BCM6846 is not identical to any of the
previous versions, but has extended registers not present in
the other variants. For this reason we need to use a new
compatible especially for this SoC.
Suggested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/linux-devicetree/b542b2e8-115c-4234-a464-e73aa6bece5c@broadcom.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241012-bcm6846-mdio-v1-1-c703ca83e962@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If:
1) the user requested USO, but
2) there is not enough payload for GSO to kick in, and
3) the egress device doesn't offer checksum offload, then
we want to compute the L4 checksum in software early on.
In the case when we are not taking the GSO path, but it has been requested,
the software checksum fallback in skb_segment doesn't get a chance to
compute the full checksum, if the egress device can't do it. As a result we
end up sending UDP datagrams with only a partial checksum filled in, which
the peer will discard.
Fixes: 10154dbded6d ("udp: Allow GSO transmit from devices with no checksum offload")
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241011-uso-swcsum-fixup-v2-1-6e1ddc199af9@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While running net selftests with CONFIG_PROVE_RCU_LIST=y I saw
one lockdep splat [1].
genlmsg_mcast() uses for_each_net_rcu(), and must therefore hold RCU.
Instead of letting all callers guard genlmsg_multicast_allns()
with a rcu_read_lock()/rcu_read_unlock() pair, do it in genlmsg_mcast().
This also means the @flags parameter is useless, we need to always use
GFP_ATOMIC.
[1]
[10882.424136] =============================
[10882.424166] WARNING: suspicious RCU usage
[10882.424309] 6.12.0-rc2-virtme #1156 Not tainted
[10882.424400] -----------------------------
[10882.424423] net/netlink/genetlink.c:1940 RCU-list traversed in non-reader section!!
[10882.424469]
other info that might help us debug this:
[10882.424500]
rcu_scheduler_active = 2, debug_locks = 1
[10882.424744] 2 locks held by ip/15677:
[10882.424791] #0: ffffffffb6b491b0 (cb_lock){++++}-{3:3}, at: genl_rcv (net/netlink/genetlink.c:1219)
[10882.426334] #1: ffffffffb6b49248 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg (net/netlink/genetlink.c:61 net/netlink/genetlink.c:57 net/netlink/genetlink.c:1209)
[10882.426465]
stack backtrace:
[10882.426805] CPU: 14 UID: 0 PID: 15677 Comm: ip Not tainted 6.12.0-rc2-virtme #1156
[10882.426919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[10882.427046] Call Trace:
[10882.427131] <TASK>
[10882.427244] dump_stack_lvl (lib/dump_stack.c:123)
[10882.427335] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
[10882.427387] genlmsg_multicast_allns (net/netlink/genetlink.c:1940 (discriminator 7) net/netlink/genetlink.c:1977 (discriminator 7))
[10882.427436] l2tp_tunnel_notify.constprop.0 (net/l2tp/l2tp_netlink.c:119) l2tp_netlink
[10882.427683] l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:253) l2tp_netlink
[10882.427748] genl_family_rcv_msg_doit (net/netlink/genetlink.c:1115)
[10882.427834] genl_rcv_msg (net/netlink/genetlink.c:1195 net/netlink/genetlink.c:1210)
[10882.427877] ? __pfx_l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:186) l2tp_netlink
[10882.427927] ? __pfx_genl_rcv_msg (net/netlink/genetlink.c:1201)
[10882.427959] netlink_rcv_skb (net/netlink/af_netlink.c:2551)
[10882.428069] genl_rcv (net/netlink/genetlink.c:1220)
[10882.428095] netlink_unicast (net/netlink/af_netlink.c:1332 net/netlink/af_netlink.c:1357)
[10882.428140] netlink_sendmsg (net/netlink/af_netlink.c:1901)
[10882.428210] ____sys_sendmsg (net/socket.c:729 (discriminator 1) net/socket.c:744 (discriminator 1) net/socket.c:2607 (discriminator 1))
Fixes: 33f72e6f0c67 ("l2tp : multicast notification to the registered listeners")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Tom Parkin <tparkin@katalix.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241011171217.3166614-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the Marvell datasheet the 88E6361 has two VTU pages
(4k VIDs per page) so the max_vid should be 8191, not 4095.
In the current implementation mv88e6xxx_vtu_walk() gives unexpected
results because of this error. I verified that mv88e6xxx_vtu_walk()
works correctly on the MV88E6361 with this patch in place.
Fixes: 12899f299803 ("net: dsa: mv88e6xxx: enable support for 88E6361 switch")
Signed-off-by: Peter Rashleigh <peter@rashleigh.ca>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241014204342.5852-1-peter@rashleigh.ca
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Martin KaFai Lau reported use-after-free [0] in reqsk_timer_handler().
"""
We are seeing a use-after-free from a bpf prog attached to
trace_tcp_retransmit_synack. The program passes the req->sk to the
bpf_sk_storage_get_tracing kernel helper which does check for null
before using it.
"""
The commit 83fccfc3940c ("inet: fix potential deadlock in
reqsk_queue_unlink()") added timer_pending() in reqsk_queue_unlink() not
to call del_timer_sync() from reqsk_timer_handler(), but it introduced a
small race window.
Before the timer is called, expire_timers() calls detach_timer(timer, true)
to clear timer->entry.pprev and marks it as not pending.
If reqsk_queue_unlink() checks timer_pending() just after expire_timers()
calls detach_timer(), TCP will miss del_timer_sync(); the reqsk timer will
continue running and send multiple SYN+ACKs until it expires.
The reported UAF could happen if req->sk is close()d earlier than the timer
expiration, which is 63s by default.
The scenario would be
1. inet_csk_complete_hashdance() calls inet_csk_reqsk_queue_drop(),
but del_timer_sync() is missed
2. reqsk timer is executed and scheduled again
3. req->sk is accept()ed and reqsk_put() decrements rsk_refcnt, but
reqsk timer still has another one, and inet_csk_accept() does not
clear req->sk for non-TFO sockets
4. sk is close()d
5. reqsk timer is executed again, and BPF touches req->sk
Let's not use timer_pending() by passing the caller context to
__inet_csk_reqsk_queue_drop().
Note that reqsk timer is pinned, so the issue does not happen in most
use cases. [1]
[0]
BUG: KFENCE: use-after-free read in bpf_sk_storage_get_tracing+0x2e/0x1b0
Use-after-free read at 0x00000000a891fb3a (in kfence-#1):
bpf_sk_storage_get_tracing+0x2e/0x1b0
bpf_prog_5ea3e95db6da0438_tcp_retransmit_synack+0x1d20/0x1dda
bpf_trace_run2+0x4c/0xc0
tcp_rtx_synack+0xf9/0x100
reqsk_timer_handler+0xda/0x3d0
run_timer_softirq+0x292/0x8a0
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
intel_idle_irq+0x5a/0xa0
cpuidle_enter_state+0x94/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
kfence-#1: 0x00000000a72cc7b6-0x00000000d97616d9, size=2376, cache=TCPv6
allocated by task 0 on cpu 9 at 260507.901592s:
sk_prot_alloc+0x35/0x140
sk_clone_lock+0x1f/0x3f0
inet_csk_clone_lock+0x15/0x160
tcp_create_openreq_child+0x1f/0x410
tcp_v6_syn_recv_sock+0x1da/0x700
tcp_check_req+0x1fb/0x510
tcp_v6_rcv+0x98b/0x1420
ipv6_list_rcv+0x2258/0x26e0
napi_complete_done+0x5b1/0x2990
mlx5e_napi_poll+0x2ae/0x8d0
net_rx_action+0x13e/0x590
irq_exit_rcu+0xf5/0x320
common_interrupt+0x80/0x90
asm_common_interrupt+0x22/0x40
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
freed by task 0 on cpu 9 at 260507.927527s:
rcu_core_si+0x4ff/0xf10
irq_exit_rcu+0xf5/0x320
sysvec_apic_timer_interrupt+0x6d/0x80
asm_sysvec_apic_timer_interrupt+0x16/0x20
cpuidle_enter_state+0xfb/0x273
cpu_startup_entry+0x15e/0x260
start_secondary+0x8a/0x90
secondary_startup_64_no_verify+0xfa/0xfb
Fixes: 83fccfc3940c ("inet: fix potential deadlock in reqsk_queue_unlink()")
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Closes: https://lore.kernel.org/netdev/eb6684d0-ffd9-4bdc-9196-33f690c25824@linux.dev/
Link: https://lore.kernel.org/netdev/b55e2ca0-42f2-4b7c-b445-6ffd87ca74a0@linux.dev/ [1]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241014223312.4254-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 1202cdd66531 ("Remove DECnet support from kernel"),
NEIGH_DN_TABLE is no longer used.
MPLS has implicit dependency on it in nla_put_via(), but nla_get_via()
does not support DECnet.
Let's remove NEIGH_DN_TABLE.
Now, neigh_tables[] has only 2 elements and no extra iteration
for DECnet in many places.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241014235216.10785-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
