summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-06-14drm/amdgpu: fix locking scope when flushing tlbYunxiang Li
Which method is used to flush tlb does not depend on whether a reset is in progress or not. We should skip flush altogether if the GPU will get reset. So put both path under reset_domain read lock. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org
2024-06-14drm/amdgpu: call flush_gpu_tlb directly in gfxhub enableYunxiang Li
Here since we are in reset and takes the reset_domain write side lock already. We can't use the flush tlb helper which tries to take the read side. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: use helper in amdgpu_gart_unbindYunxiang Li
When amdgpu_gart_invalidate_tlb helper is introduced this part was left out of the conversion. Avoid the code duplication here. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: remove tlb flush in amdgpu_gtt_mgr_recoverYunxiang Li
At this point the gart is not set up, there's no point to invalidate tlb here and it could even be harmful. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu/kfd: remove is_hws_hang and is_resettingYunxiang Li
is_hws_hang and is_resetting serves pretty much the same purpose and they all duplicates the work of the reset_domain lock, just check that directly instead. This also eliminate a few bugs listed below and get rid of dqm->ops.pre_reset. kfd_hws_hang did not need to avoid scheduling another reset. If the on-going reset decided to skip GPU reset we have a bad time, otherwise the extra reset will get cancelled anyway. remove_queue_mes forgot to check is_resetting flag compared to the pre-MES path unmap_queue_cpsch, so it did not block hw access during reset correctly. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: fix sriov host flr handlerYunxiang Li
We send back the ready to reset message before we stop anything. This is wrong. Move it to when we are actually ready for the FLR to happen. In the current state since we take tens of seconds to stop everything, it is very likely that host would give up waiting and reset the GPU before we send ready, so it would be the same as before. But this gets rid of the hack with reset_domain locking and also let us tell how slow ready to reset actually is from the host. The ready to reset speed can be improved later. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: add skip_hw_access checks for sriovYunxiang Li
Accessing registers via host is missing the check for skip_hw_access and the lockdep check that comes with it. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: add reset source in various casesEric Huang
To fullfill the reset event description. Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: fix NULL pointer in amdgpu_reset_get_descEric Huang
amdgpu_job_ring may return NULL, which causes kernel NULL pointer error, using another way to print ring name instead of ring->name. Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: dc 3.2.287Aric Cyr
This version brings the following changes: - Add sequential ONO sequencing for DCN35 - Add new GPINT command definitions - reduce ODM slice count to initial new dc state only when needed - Enable copying of bounding box data from VBIOS DMUB - Guard reading 3DLUT registers for dcn32/dcn35 Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Fix DSC slice and delay calculationsSung Joon Kim
[why] There are other factors that determine the number of DSC slices. The slices should not be determined in DML but retrieve the value calculated from driver. [how] Update the logic to determine DSC slice. Make DSCDelay per display pipe. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Increase MAX_LINKS by 2Alex Hung
Two additional virtual links are created and thus increasing size for dc->links by two. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Guard reading 3DLUT registers for dcn32/dcn35Nicholas Kazlauskas
[Why] 3DLUT is not part of the DPP on DCN32/DCN35 ASIC and these registers now exist in MCM state. [How] Add guards when reading DPP state based on whether the register has a valid offset. Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Various DML2 fixes for FAMS2Dillon Varone
- Ensure SubVP stream settings match ODM policy - Fix MALL size calculations when DCC is enabled - Fail if any stream fails DRR policy check Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Program DIG FE source select for DVI before PHY enAlvin Lee
[Description] In newer DCN's the programming of SYMCLK_FE_SRC_SEL depends on the value of DIG_FE_SOURCE_SELECT. If DIG_FE_SOURCE_SELECT is not already programmed at the time of PHY / DIG enable then the FW sequence will program an incorrect SYMCLK source. Ensure that we program DIG_FE_SOURCE_SELECT for all DIO scenarios (DVI in this particular case) before going through the PHY / DIG enable sequence. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/pm: remove dead code in navi10_emit_clk_levels and ↵Jesse Zhang
navi10_print_clk_levels Since the range of the varibable i is 0 - 3. So execution cannot reach this statement: default. Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: remove dead code in atom_get_src_intJesse Zhang
Since the range of align is 0~7, the expression is: align = (attr >> 3) & 7. In the case of ATOM_ARG_IMM, the code cannot reach the default case. So there is no need for "break". Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Suggested-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Introduce deferred Replay coasting vtotal updateChunTao Tso
Add functions to defer updating of coasting vtotal after source refresh rate update. Reviewed-by: Robin Chen <robin.chen@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Add NULL check for 'afb' before dereferencing in ↵Srinivasan Shanmugam
amdgpu_dm_plane_handle_cursor_update This commit adds a null check for the 'afb' variable in the amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was assumed to be null, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Add null check for 'afb' in amdgpu_dm_update_cursorSrinivasan Shanmugam
This commit adds a null check for the 'afb' variable in the amdgpu_dm_update_cursor function. Previously, 'afb' was assumed to be null at line 8388, but was used later in the code without a null check. This could potentially lead to a null pointer dereference. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8433 amdgpu_dm_update_cursor() error: we previously assumed 'afb' could be null (see line 8388) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c 8379 static void amdgpu_dm_update_cursor(struct drm_plane *plane, 8380 struct drm_plane_state *old_plane_state, 8381 struct dc_stream_update *update) 8382 { 8383 struct amdgpu_device *adev = drm_to_adev(plane->dev); 8384 struct amdgpu_framebuffer *afb = to_amdgpu_framebuffer(plane->state->fb); 8385 struct drm_crtc *crtc = afb ? plane->state->crtc : old_plane_state->crtc; ^^^^^ 8386 struct dm_crtc_state *crtc_state = crtc ? to_dm_crtc_state(crtc->state) : NULL; 8387 struct amdgpu_crtc *amdgpu_crtc = to_amdgpu_crtc(crtc); 8388 uint64_t address = afb ? afb->address : 0; ^^^^^ Checks for NULL 8389 struct dc_cursor_position position = {0}; 8390 struct dc_cursor_attributes attributes; 8391 int ret; 8392 8393 if (!plane->state->fb && !old_plane_state->fb) 8394 return; 8395 8396 drm_dbg_atomic(plane->dev, "crtc_id=%d with size %d to %d\n", 8397 amdgpu_crtc->crtc_id, plane->state->crtc_w, 8398 plane->state->crtc_h); 8399 8400 ret = amdgpu_dm_plane_get_cursor_position(plane, crtc, &position); 8401 if (ret) 8402 return; 8403 8404 if (!position.enable) { 8405 /* turn off cursor */ 8406 if (crtc_state && crtc_state->stream) { 8407 dc_stream_set_cursor_position(crtc_state->stream, 8408 &position); 8409 update->cursor_position = &crtc_state->stream->cursor_position; 8410 } 8411 return; 8412 } 8413 8414 amdgpu_crtc->cursor_width = plane->state->crtc_w; 8415 amdgpu_crtc->cursor_height = plane->state->crtc_h; 8416 8417 memset(&attributes, 0, sizeof(attributes)); 8418 attributes.address.high_part = upper_32_bits(address); 8419 attributes.address.low_part = lower_32_bits(address); 8420 attributes.width = plane->state->crtc_w; 8421 attributes.height = plane->state->crtc_h; 8422 attributes.color_format = CURSOR_MODE_COLOR_PRE_MULTIPLIED_ALPHA; 8423 attributes.rotation_angle = 0; 8424 attributes.attribute_flags.value = 0; 8425 8426 /* Enable cursor degamma ROM on DCN3+ for implicit sRGB degamma in DRM 8427 * legacy gamma setup. 8428 */ 8429 if (crtc_state->cm_is_degamma_srgb && 8430 adev->dm.dc->caps.color.dpp.gamma_corr) 8431 attributes.attribute_flags.bits.ENABLE_CURSOR_DEGAMMA = 1; 8432 --> 8433 attributes.pitch = afb->base.pitches[0] / afb->base.format->cpp[0]; ^^^^^ ^^^^^ Unchecked dereferences 8434 8435 if (crtc_state->stream) { 8436 if (!dc_stream_set_cursor_attributes(crtc_state->stream, 8437 &attributes)) 8438 DRM_ERROR("DC failed to set cursor attributes\n"); 8439 8440 update->cursor_attributes = &crtc_state->stream->cursor_attributes; 8441 8442 if (!dc_stream_set_cursor_position(crtc_state->stream, 8443 &position)) 8444 DRM_ERROR("DC failed to set cursor position\n"); 8445 8446 update->cursor_position = &crtc_state->stream->cursor_position; 8447 } 8448 } Fixes: 66eba12a5482 ("drm/amd/display: Do cursor programming with rest of pipe") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Add monitor patch skip disable crtc during psr and ips1Lewis Huang
[Why] For some panel, it cannot handle pseudo vblank set by otg resync when leave psr [How] The monitor patch will keep otg_on during enter IPS1. And then we don't need to do otg resync when wake up. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Lewis Huang <lewis.huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: add set ips disableChiawen Huang
[How&Why] Once IPS active, all the DCN resources are not be allowed to access. It needs to a function for 3rd party to on/off IPS. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Add recovery timeout to FAMS2Dillon Varone
[WHY&HOW] Add 5ms timeout to trigger recovery and force allow P-State in DMUB. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Force max clocks unconditionally when p-state is unsupportedDillon Varone
[WHY&HOW] UCLK and FCLK are updated together, so an FCLK update can also cause UCLK update to SMU. When this happens, the UCLK provided should be max if switching is unsupported. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Change the order of setting DP_IS_USB_C flagWayne Lin
[Why] enc10->base.features.flags.bits.DP_IS_USB_C will be overwritten if we set it before initializing enc10->base.features [How] Determine DP_IS_USB_C after enc10->base.features is initialized. Besides, bp_cap_info.DP_IS_USB_C will never be set in get_connector_speed_cap_info(). Remove the redudant code. Reviewed-by: Roman Li <roman.li@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: bypass ODM before CRTC offYihan Zhu
[WHY] OPPs couldn't disconnect from the ODM that cause the double buffer pending not being latched due to missing VUPDATE. [HOW] Moving memory blanking before OTG turn off to make sure double buffer latched correctly. Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Yihan Zhu <yihan.zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display/dcn401: use pre-allocated temp structure for bounding boxAlex Deucher
This mirrors what the driver does for older DCN generations. Should fix: [ 26.924055] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306 [ 26.924060] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1022, name: modprobe [ 26.924063] preempt_count: 2, expected: 0 [ 26.924064] RCU nest depth: 0, expected: 0 [ 26.924066] Preemption disabled at: [ 26.924067] [<ffffffffc089e5e0>] dc_fpu_begin+0x30/0xd0 [amdgpu] [ 26.924322] CPU: 9 PID: 1022 Comm: modprobe Not tainted 6.8.0+ #20 [ 26.924325] Hardware name: System manufacturer System Product Name/CROSSHAIR VI HERO, BIOS 6302 10/23/2018 [ 26.924326] Call Trace: [ 26.924327] <TASK> [ 26.924329] dump_stack_lvl+0x37/0x50 [ 26.924333] ? dc_fpu_begin+0x30/0xd0 [amdgpu] [ 26.924589] dump_stack+0x10/0x20 [ 26.924592] __might_resched+0x16a/0x1c0 [ 26.924596] __might_sleep+0x42/0x70 [ 26.924598] __kmalloc_node_track_caller+0x2ad/0x4b0 [ 26.924601] ? dm_helpers_allocate_gpu_mem+0x12/0x20 [amdgpu] [ 26.924855] ? dcn401_update_bw_bounding_box+0x2a/0xf0 [amdgpu] [ 26.925122] kmemdup+0x20/0x50 [ 26.925124] ? kernel_fpu_begin_mask+0x6b/0xe0 [ 26.925127] ? kmemdup+0x20/0x50 [ 26.925129] dcn401_update_bw_bounding_box+0x2a/0xf0 [amdgpu] [ 26.925393] dc_create+0x311/0x670 [amdgpu] [ 26.925649] amdgpu_dm_init+0x2aa/0x1fa0 [amdgpu] [ 26.925903] ? irq_work_queue+0x38/0x50 [ 26.925907] ? vprintk_emit+0x1e7/0x270 [ 26.925910] ? dev_printk_emit+0x83/0xb0 [ 26.925914] ? amdgpu_device_rreg+0x17/0x20 [amdgpu] [ 26.926133] dm_hw_init+0x14/0x30 [amdgpu] v2: drop extra memcpy Fixes: 669d6b078ed8 ("drm/amd/display: avoid large on-stack structures") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: George Zhang <george.zhang@amd.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: harry.wentland@amd.com Cc: sunpeng.li@amd.com Cc: Rodrigo.Siqueira@amd.com
2024-06-14drm/amd/display: use pre-allocated temp structure for bounding boxAlex Deucher
This mirrors what the driver does for older DCN generations. Should fix: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 449, name: kworker/u64:8 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: ffffffffc0ce1580>] dc_fpu_begin+0x30/0xd0 [amdgpu] CPU: 5 PID: 449 Comm: kworker/u64:8 Tainted: G W 6.8.0+ #35 Hardware name: System manufacturer System Product Name/ROG STRIX X570-E GAMING WIFI II, BIOS 4204 02/24/2022 Workqueue: events_unbound async_run_entry_fn v2: drop extra memcpy Fixes: 88c61827cedc ("drm/amd/display: dynamically allocate dml2_configuration_options structures") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: George Zhang <George.zhang@amd.com> (v1) Suggested-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: George Zhang <george.zhang@amd.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: harry.wentland@amd.com Cc: sunpeng.li@amd.com Cc: Rodrigo.Siqueira@amd.com
2024-06-14drm/amdgpu: add sdma 7.0 support for copy dcc bufferFrank Min
1. Add dcc buffer flag for copy buffer 2. Add sdma 7.0 support copy dcc buffer Signed-off-by: Likun Gao <Likun.Gao@amd.com> Signed-off-by: Frank Min <Frank.Min@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: support for DCC featureLikun Gao
Deal with AMDGPU_GEM_CREATE_GFX12_DCC to set DCC bit when needed. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amdgpu: add additional VM bitsAlex Deucher
Add additional VM PTE bits. Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Simplify if conditionsThorsten Blum
The if conditions !A || A && B can be simplified to !A || B. Fixes the following Coccinelle/coccicheck warnings reported by excluded_middle.cocci: WARNING !A || A && B is equivalent to !A || B WARNING !A || A && B is equivalent to !A || B WARNING !A || A && B is equivalent to !A || B Compile-tested only. Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Extend PSRSU residency modeJack Chang
1. To support multiple PSRSU residency measurement mode Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Jack Chang <jack.chang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-14drm/amd/display: Add outbox notification support for HPD redetectNicholas Kazlauskas
[Why] HPD sense changes can occur during low power states and need to be notified from firmware to driver. Upon notification the hotplug redetection routines should execute. [How] Add Support in DMUB srv and DMUB srv stat for receiving these notifications. DM can hook them up and process the HPD redetection once received. Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amdgpu: add RAS is_rma flagTao Zhou
Set the flag to true if bad page number reaches threshold. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Add null checks for 'stream' and 'plane' before dereferencingSrinivasan Shanmugam
This commit adds null checks for the 'stream' and 'plane' variables in the dcn30_apply_idle_power_optimizations function. These variables were previously assumed to be null at line 922, but they were used later in the code without checking if they were null. This could potentially lead to a null pointer dereference, which would cause a crash. The null checks ensure that 'stream' and 'plane' are not null before they are used, preventing potential crashes. Fixes the below static smatch checker: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:938 dcn30_apply_idle_power_optimizations() error: we previously assumed 'stream' could be null (see line 922) drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:940 dcn30_apply_idle_power_optimizations() error: we previously assumed 'plane' could be null (see line 922) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/pm: remove dead code in si_convert_power_level_to_smcJesse Zhang
Since gmc_pg is false, setting mcFlags with SISLANDS_SMC_MC_PG_EN cannot be reach. Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Suggested-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Prevent IPX From Link Detect and Set ModeFangzhi Zuo
IPX involvment proven to affect LT, causing link loss. Need to prevent IPX enabled in LT process in which link detect and set mode are main procedures that have LT taken place. Reviewed-by: Roman Li <roman.li@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amdkfd: remove logically dead codeJesse Zhang
idr_for_each_entry can ensure that mem is not empty during the loop. So don't need check mem again. Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amdgpu: fix failure mapping legacy queue when FLRLin.Cao
Flag "mes.ring.shced.ready" will be set as true after mes hw init and set as false when mes hw fini to avoid duplicate initialization. But hw fini will not be called when function level reset, which will cause mes hw init be skipped during FLR, which will leads to mapping legacy queue fail. Set this flag as false when post reset will fix this issue. Signed-off-by: Lin.Cao <lincao12@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Fetch Mall caps from DCDaniel Sa
[Why] When performing P-State switching with Subvp on 8k (downscaled to 4k). corruption can be seen on the screen. MALL data was not being fetched from DC, and the system things there is more MALL space then what is actually available. [How] Read MALL size from dc caps. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Daniel Sa <daniel.sa@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: fix YUV video color corruption in DCN401Samson Tam
[Why] Missing check causes sequence error which results in chroma filter coefficients not being updated in certain modes when we display YUV video in fullscreen. This results in color corruption in video [How] Add back chroma_coef_mode check in dscl_set_scl_filter so that filter coefficients are calculated and updated when we have YUV surface Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amdkfd: add reset cause in gpu pre-reset smi eventEric Huang
reset cause is requested by customer as additional info for gpu reset smi event. v2: integerate reset sources suggested by Lijo Lazar Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amdgpu: Update soc24_enum.h and soc21_enum.hFrank Min
Update to latest changes. Signed-off-by: Frank Min <Frank.Min@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amdgpu: Set PTE_IS_PTE bit for gfx12Frank Min
Set PTE_IS_PTE bit while PRT is enabled on gfx12. Signed-off-by: Frank Min <Frank.Min@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Updated optc401_set_drr to use dcn401 functionsRelja Vojvodic
why: optc_401_set_drr was using an old optc3 function to update vtotal min and max, causing crashes when disabling FAMS2 how: Updated dcn401 to point to opt401 function for vtotal updates. This version of the function has FAMS2 logic that allows for FAMS2 to be disabled. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amdgpu: add reset sources in gpu reset contextEric Huang
reset source or reset cause is very useful info for reset context, it will be used by events API. Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Add UCLK p-state support message to dcn401Dillon Varone
[WHY&HOW] Improves on the SMU interface to explicitly declare P-State support. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/display: Use current_state when checking old_pipe subvp typeAlvin Lee
[Description] When checking the subvp type of the previous state we must pass in current_state to the interface instead of context otherwise we will get the wrong result. Reviewed-by: Samson Tam <samson.tam@amd.com> Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-06-05drm/amd/pm: add missing error handling in function ↵Bob Zhou
smu_v13_0_6_allocate_dpm_context Check return value to avoid null pointer dereference. Signed-off-by: Bob Zhou <bob.zhou@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 03:42:35 +0000