summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-08bonding: deal with xfrm state in all modes and add more error-checkingJarod Wilson
It's possible that device removal happens when the bond is in non-AB mode, and addition happens in AB mode, so bond_ipsec_del_sa() never gets called, which leaves security associations in an odd state if bond_ipsec_add_sa() then gets called after switching the bond into AB. Just call add and delete universally for all modes to keep things consistent. However, it's also possible that this code gets called when the system is shutting down, and the xfrm subsystem has already been disconnected from the bond device, so we need to do some error-checking and bail, lest we hit a null ptr deref. Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load") CC: Huy Nguyen <huyn@mellanox.com> CC: Saeed Mahameed <saeedm@mellanox.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Jakub Kicinski <kuba@kernel.org> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08Merge branch 'RTL8366RB-tagging-support'David S. Miller
Linus Walleij says: ==================== RTL8366RB tagging support This patch set adds DSA tagging support to the RTL8366RB DSA driver. There is a minor performance improvement in the tag parser compared to the previous patch set and the review tags have been collected. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net: dsa: rtl8366rb: Support the CPU DSA tagLinus Walleij
This activates the support to use the CPU tag to properly direct ingress traffic to the right port. Bit 15 in register RTL8368RB_CPU_CTRL_REG can be set to 1 to disable the insertion of the CPU tag which is what the code currently does. The bit 15 define calls this setting RTL8368RB_CPU_INSTAG which is confusing since the inverse meaning is implied: programmers may think that setting this bit to 1 will *enable* inserting the tag rather than disabling it, so rename this setting in bit 15 to RTL8368RB_CPU_NO_TAG which is more to the point. After this e.g. ping works out-of-the-box with the RTL8366RB. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tagLinus Walleij
This implements the known parts of the Realtek 4 byte tag protocol version 0xA, as found in the RTL8366RB DSA switch. It is designated as protocol version 0xA as a different Realtek 4 byte tag format with protocol version 0x9 is known to exist in the Realtek RTL8306 chips. The tag and switch chip lacks public documentation, so the tag format has been reverse-engineered from packet dumps. As only ingress traffic has been available for analysis an egress tag has not been possible to develop (even using educated guesses about bit fields) so this is as far as it gets. It is not known if the switch even supports egress tagging. Excessive attempts to figure out the egress tag format was made. When nothing else worked, I just tried all bit combinations with 0xannp where a is protocol and p is port. I looped through all values several times trying to get a response from ping, without any positive result. Using just these ingress tags however, the switch functionality is vastly improved and the packets find their way into the destination port without any tricky VLAN configuration. On the D-Link DIR-685 the LAN ports now come up and respond to ping without any command line configuration so this is a real improvement for users. Egress packets need to be restricted to the proper target ports using VLAN, which the RTL8366RB DSA switch driver already sets up. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09selftests/bpf: test_progs avoid minus shell exit codesJesper Dangaard Brouer
There are a number of places in test_progs that use minus-1 as the argument to exit(). This is confusing as a process exit status is masked to be a number between 0 and 255 as defined in man exit(3). Thus, users will see status 255 instead of minus-1. This patch use positive exit code 3 instead of minus-1. These cases are put in the same group of infrastructure setup errors. Fixes: fd27b1835e70 ("selftests/bpf: Reset process and thread affinity after each test/sub-test") Fixes: 811d7e375d08 ("bpf: selftests: Restore netns after each test") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159410594499.1093222.11080787853132708654.stgit@firesoul
2020-07-09selftests/bpf: test_progs use another shell exit on non-actionsJesper Dangaard Brouer
This is a follow up adjustment to commit 6c92bd5cd465 ("selftests/bpf: Test_progs indicate to shell on non-actions"), that returns shell exit indication EXIT_FAILURE (value 1) when user selects a non-existing test. The problem with using EXIT_FAILURE is that a shell script cannot tell the difference between a non-existing test and the test failing. This patch uses value 2 as shell exit indication. (Aside note unrecognized option parameters use value 64). Fixes: 6c92bd5cd465 ("selftests/bpf: Test_progs indicate to shell on non-actions") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/159410593992.1093222.90072558386094370.stgit@firesoul
2020-07-09bpf: Fix another bpftool segfault without skeleton code enabledLouis Peens
emit_obj_refs_json needs to added the same as with emit_obj_refs_plain to prevent segfaults, similar to Commit "8ae4121bd89e bpf: Fix bpftool without skeleton code enabled"). See the error below: # ./bpftool -p prog { "error": "bpftool built without PID iterator support" },[{ "id": 2, "type": "cgroup_skb", "tag": "7be49e3934a125ba", "gpl_compatible": true, "loaded_at": 1594052789, "uid": 0, "bytes_xlated": 296, "jited": true, "bytes_jited": 203, "bytes_memlock": 4096, "map_ids": [2,3 Segmentation fault (core dumped) The same happens for ./bpftool -p map, as well as ./bpftool -j prog/map. Fixes: d53dee3fe013 ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs") Signed-off-by: Louis Peens <louis.peens@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200708110827.7673-1-louis.peens@netronome.com
2020-07-08net/mlx5: Added support for 100Gbps per lane link modesMeir Lichtinger
This patch exposes new link modes using 100Gbps per lane, including 100G, 200G and 400G modes. Signed-off-by: Meir Lichtinger <meirl@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08ethtool: Add support for 100Gbps per lane link modesMeir Lichtinger
Define 100G, 200G and 400G link modes using 100Gbps per lane LR, ER and FR are defined as a single link mode because they are using same technology and by design are fully interoperable. EEPROM content indicates if the module is LR, ER, or FR, and the user space ethtool decoder is planned to support decoding these modes in the EEPROM. Signed-off-by: Meir Lichtinger <meirl@mellanox.com> CC: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08l2tp: remove skb_dst_set() from l2tp_xmit_skb()Xin Long
In the tx path of l2tp, l2tp_xmit_skb() calls skb_dst_set() to set skb's dst. However, it will eventually call inet6_csk_xmit() or ip_queue_xmit() where skb's dst will be overwritten by: skb_dst_set_noref(skb, dst); without releasing the old dst in skb. Then it causes dst/dev refcnt leak: unregister_netdevice: waiting for eth0 to become free. Usage count = 1 This can be reproduced by simply running: # modprobe l2tp_eth && modprobe l2tp_ip # sh ./tools/testing/selftests/net/l2tp.sh So before going to inet6_csk_xmit() or ip_queue_xmit(), skb's dst should be dropped. This patch is to fix it by removing skb_dst_set() from l2tp_xmit_skb() and moving skb_dst_drop() into l2tp_xmit_core(). Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: James Chapman <jchapman@katalix.com> Tested-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08Merge branch 'bnxt_en-Driver-update-for-net-next'David S. Miller
Michael Chan says: ==================== bnxt_en: Driver update for net-next. This patchset implements ethtool -X to setup user-defined RSS indirection table. The new infrastructure also allows the proper logical ring index to be used to populate the RSS indirection when queried by ethtool -x. Prior to these patches, we were incorrectly populating the output of ethtool -x with internal ring IDs which would make no sense to the user. The last 2 patches add some cleanups to the VLAN acceleration logic and check the firmware capabilities before allowing VLAN acceleration offloads. v4: Move bnxt_get_rxfh_indir_size() fix to a new patch #2. Modify patch #7 to revert RSS map to default only when necessary. v3: Use ALIGN() in patch 5. Add warning messages in patch 6. v2: Some RSS indirection table changes requested by Jakub Kicinski. ==================== Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: allow firmware to disable VLAN offloadsEdwin Peer
Bare-metal use cases require giving firmware and the embedded application processor control over VLAN offloads. The driver should not attempt to override or utilize this feature in such scenarios since it will not work as expected. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: clean up VLAN feature bit handlingEdwin Peer
The hardware VLAN offload feature on our NIC does not have separate knobs for handling customer and service tags on RX. Either offloading of both must be enabled or both must be disabled. Introduce definitions for the combined feature set in order to clean up the code and make this constraint more clear. Technically these features can be separately enabled on TX, however, since the default is to turn both on, the combined TX feature set is also introduced for code consistency. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Implement ethtool -X to set indirection table.Michael Chan
With the new infrastructure in place, we can now support the setting of the indirection table from ethtool. When changing channels, in a rare case that firmware cannot reserve the rings that were promised, we will still try to keep the RSS map and only revert to default when absolutely necessary. v4: Revert RSS map to default during ring change only when absolutely necessary. v3: Add warning messages when firmware cannot reserve the requested RX rings, and when the RSS table entries have to change to default. v2: When changing channels, if the RSS table size changes and RSS map is non-default, return error. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Return correct RSS indirection table entries to ethtool -x.Michael Chan
Now that we have the logical indirection table, we can return these proper logical indices directly to ethtool -x instead of the physical IDs. Reported-by: Jakub Kicinski <kicinski@fb.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Fill HW RSS table from the RSS logical indirection table.Michael Chan
Now that we have the logical table, we can fill the HW RSS table using the logical table's entries and converting them to the HW specific format. Re-initialize the logical table to standard distribution if the number of RX rings changes during ring reservation. v4: Use bnxt_get_rxfh_indir_size() to get the RSS table size. v2: Use ALIGN() to roundup the RSS table size. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Add helper function to return the number of RSS contexts.Michael Chan
On some chips, this varies based on the number of RX rings. Add this helper function and refactor the existing code to use it. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Add logical RSS indirection table structure.Michael Chan
The driver currently does not keep track of the logical RSS indirection table. The hardware RSS table is set up with standard default ring distribution when initializing the chip. This makes it difficult to support user sepcified indirection table entries. As a first step, add the logical table in the main bnxt structure and allocate it according to chip specific table size. Add a function that sets up default RSS distribution based on the number of RX rings. v4: Use bnxt_get_rxfh_indir_size() for the current RSS table size. v2: Use kmalloc_array() since we init. all entries afterwards. Use ALIGN() to roundup the RSS table size. Use ethtool_rxfh_indir_default() to init. the default entries. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Fix up bnxt_get_rxfh_indir_size().Michael Chan
Fix up bnxt_get_rxfh_indir_size() to return the proper current RSS table size for P5 chips. Change it to non-static so that bnxt.c can use it to get the table size. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08bnxt_en: Set up the chip specific RSS table size.Michael Chan
Currently, we allocate one page for the hardware DMA RSS indirection table. While the size is currently big enough for all chips, future chip variations may support bigger sizes, so it is better to calculate and store the chip specific size and allocate accordingly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08nbd: Fix memory leak in nbd_add_socketZheng Bin
When adding first socket to nbd, if nsock's allocation failed, the data structure member "config->socks" was reallocated, but the data structure member "config->num_connections" was not updated. A memory leak will occur then because the function "nbd_config_put" will free "config->socks" only when "config->num_connections" is not zero. Fixes: 03bf73c315ed ("nbd: prevent memory leak") Reported-by: syzbot+934037347002901b8d2a@syzkaller.appspotmail.com Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08arm64: Documentation: Fix broken table in generated HTMLSuzuki K Poulose
cpu-feature-registers.rst is missing a new line before a couple of tables listing the visible fields, causing broken tables in the HTML documentation generated by "make htmldocs". Fix this by adding the missing new line. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20200707143152.154541-1-suzuki.poulose@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: kgdb: Fix single-step exception handling oopsWei Li
After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will delay installing breakpoints, do single-step first), it won't work correctly, and it will enter kdb due to oops. It's because the reason gotten in kdb_stub() is not as expected, and it seems that the ex_vector for single-step should be 0, like what arch powerpc/sh/parisc has implemented. Before the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc [3]kdb> ss Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 Oops: (null) due to oops @ 0xffff800010082ab8 CPU: 3 PID: 266 Comm: sh Not tainted 5.7.0-rc4-13839-gf0e5ad491718 #6 Hardware name: linux,dummy-virt (DT) pstate: 00000085 (nzcv daIf -PAN -UAO) pc : el1_irq+0x78/0x180 lr : __handle_sysrq+0x80/0x190 sp : ffff800015003bf0 x29: ffff800015003d20 x28: ffff0000fa878040 x27: 0000000000000000 x26: ffff80001126b1f0 x25: ffff800011b6a0d8 x24: 0000000000000000 x23: 0000000080200005 x22: ffff8000101486cc x21: ffff800015003d30 x20: 0000ffffffffffff x19: ffff8000119f2000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800015003e50 x7 : 0000000000000002 x6 : 00000000380b9990 x5 : ffff8000106e99e8 x4 : ffff0000fadd83c0 x3 : 0000ffffffffffff x2 : ffff800011b6a0d8 x1 : ffff800011b6a000 x0 : ffff80001130c9d8 Call trace: el1_irq+0x78/0x180 printk+0x0/0x84 write_sysrq_trigger+0xb0/0x118 proc_reg_write+0xb4/0xe0 __vfs_write+0x18/0x40 vfs_write+0xb0/0x1b8 ksys_write+0x64/0xf0 __arm64_sys_write+0x14/0x20 el0_svc_common.constprop.2+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xec/0x1a8 el0_sync+0x140/0x180 [3]kdb> After the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> g Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> ss Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8 [0]kdb> Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support") Signed-off-by: Wei Li <liwei391@huawei.com> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200509214159.19680-2-liwei391@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: entry: Tidy up block comments and label numbersWill Deacon
Continually butchering our entry code with CPU errata workarounds has led to it looking a little scruffy. Consistently used /* */ comment style for multi-line block comments and ensure that small numeric labels use consecutive integers. No functional change, but the state of things was irritating. Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: Rework ARM_ERRATUM_1414080 handlingMarc Zyngier
The current handling of erratum 1414080 has the side effect that cntkctl_el1 can get changed for both 32 and 64bit tasks. This isn't a problem so far, but if we ever need to mitigate another of these errata on the 64bit side, we'd better keep the messing with cntkctl_el1 local to 32bit tasks. For that, make sure that on entering the kernel from a 32bit tasks, userspace access to cntvct gets enabled, and disabled returning to userspace, while it never gets changed for 64bit tasks. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200706163802.1836732-5-maz@kernel.org [will: removed branch instructions per Mark's review comments] Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: arch_timer: Disable the compat vdso for cores affected by ↵Marc Zyngier
ARM64_WORKAROUND_1418040 ARM64_WORKAROUND_1418040 requires that AArch32 EL0 accesses to the virtual counter register are trapped and emulated by the kernel. This makes the vdso pretty pointless, and in some cases livelock prone. Provide a workaround entry that limits the vdso to 64bit tasks. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200706163802.1836732-4-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: arch_timer: Allow an workaround descriptor to disable compat vdsoMarc Zyngier
As we are about to disable the vdso for compat tasks in some circumstances, let's allow a workaround descriptor to express exactly that. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200706163802.1836732-3-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: Introduce a way to disable the 32bit vdsoMarc Zyngier
We have a class of errata (grouped under the ARM64_WORKAROUND_1418040 banner) that force the trapping of counter access from 32bit EL0. We would normally disable the whole vdso for such defect, except that it would disable it for 64bit userspace as well, which is a shame. Instead, add a new vdso_clock_mode, which signals that the vdso isn't usable for compat tasks. This gets checked in the new vdso_clocksource_ok() helper, now provided for the 32bit vdso. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200706163802.1836732-2-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: entry: Fix the typo in the comment of el1_dbg()Kevin Hao
The function name should be local_daif_mask(). Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Mark Rutlamd <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200417103212.45812-2-haokexin@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08drivers/firmware/psci: Assign @err directly in hotplug_tests()Gavin Shan
The return value of down_and_up_cpus() can be assigned to @err directly. With that, the useless assignment to @err with zero can be dropped. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20200630075943.203954-1-gshan@redhat.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups()Gavin Shan
The CPU mask (@tmp) should be released on failing to allocate @cpu_groups or any of its elements. Otherwise, it leads to memory leakage because the CPU mask variable is dynamically allocated when CONFIG_CPUMASK_OFFSTACK is enabled. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20200630075227.199624-1-gshan@redhat.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08KVM: arm64: Fix definition of PAGE_HYP_DEVICEWill Deacon
PAGE_HYP_DEVICE is intended to encode attribute bits for an EL2 stage-1 pte mapping a device. Unfortunately, it includes PROT_DEVICE_nGnRE which encodes attributes for EL1 stage-1 mappings such as UXN and nG, which are RES0 for EL2, and DBM which is meaningless as TCR_EL2.HD is not set. Fix the definition of PAGE_HYP_DEVICE so that it doesn't set RES0 bits at EL2. Acked-by: Marc Zyngier <maz@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200708162546.26176-1-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter updates for net-next: 1) Support for rejecting packets from the prerouting chain, from Laura Garcia Liebana. 2) Remove useless assignment in pipapo, from Stefano Brivio. 3) On demand hook registration in IPVS, from Julian Anastasov. 4) Expire IPVS connection from process context to not overload timers, also from Julian. 5) Fallback to conntrack TCP tracker to handle connection reuse in IPVS, from Julian Anastasov. 6) Several patches to support for chain bindings. 7) Expose enum nft_chain_flags through UAPI. 8) Reject unsupported chain flags from the netlink control plane. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08Merge branch 'net-phy-Uninline-PHY-ethtool-statistics'David S. Miller
Florian Fainelli says: ==================== net: phy: Uninline PHY ethtool statistics Now that we have introduced ethtool_phy_ops we can uninline those operations and move them back into phy.c where they belong. Since those functions are used by DSA, we need to continue exporting those symbols. It might be possible to remove ndo_get_ethtool_phy_stats in a subsequent patch since we could have DSA register its own ethtool_phy_ops instance instead of overloading the ethtool_ops. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net: phy: Uninline PHY ethtool statistics operationsFlorian Fainelli
Now that we have moved the PHY ethtool statistics to be dynamically registered, we no longer need to inline those for ethtool. This used to be done to avoid cross symbol referencing and allow ethtool to be decoupled from PHYLIB entirely. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net: phy: Define PHY statistics ethtool_phy_opsFlorian Fainelli
Extend ethtool_phy_ops to include the 3 function pointers necessary for implementing PHY statistics. In a subsequent change we will uninline those functions. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08Merge branch 'net-smc-fixes'David S. Miller
Karsten Graul says: ==================== net/smc: fixes 2020-07-08 Please apply the following patch series for smc to netdev's net tree. The patches fix problems found during more testing of SMC functionality, resulting in hang conditions and unneeded link deactivations. The clc module was hardened to be prepared for possible future SMCD versions. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net/smc: tolerate future SMCD versionsUrsula Braun
CLC proposal messages of future SMCD versions could be larger than SMCD V1 CLC proposal messages. To enable toleration in SMC V1 the receival of CLC proposal messages is adapted: * accept larger length values in CLC proposal * check trailing eye catcher for incoming CLC proposal with V1 length only * receive the whole CLC proposal even in cases it does not fit into the V1 buffer Fixes: e7b7a64a8493d ("smc: support variable CLC proposal messages") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net/smc: switch smcd_dev_list spinlock to mutexUrsula Braun
The similar smc_ib_devices spinlock has been converted to a mutex. Protecting the smcd_dev_list by a mutex is possible as well. This patch converts the smcd_dev_list spinlock to a mutex. Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net/smc: fix sleep bug in smc_pnet_find_roce_resource()Ursula Braun
Tests showed this BUG: [572555.252867] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935 [572555.252876] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 131031, name: smcapp [572555.252879] INFO: lockdep is turned off. [572555.252883] CPU: 1 PID: 131031 Comm: smcapp Tainted: G O 5.7.0-rc3uschi+ #356 [572555.252885] Hardware name: IBM 3906 M03 703 (LPAR) [572555.252887] Call Trace: [572555.252896] [<00000000ac364554>] show_stack+0x94/0xe8 [572555.252901] [<00000000aca1f400>] dump_stack+0xa0/0xe0 [572555.252906] [<00000000ac3c8c10>] ___might_sleep+0x260/0x280 [572555.252910] [<00000000acdc0c98>] __mutex_lock+0x48/0x940 [572555.252912] [<00000000acdc15c2>] mutex_lock_nested+0x32/0x40 [572555.252975] [<000003ff801762d0>] mlx5_lag_get_roce_netdev+0x30/0xc0 [mlx5_core] [572555.252996] [<000003ff801fb3aa>] mlx5_ib_get_netdev+0x3a/0xe0 [mlx5_ib] [572555.253007] [<000003ff80063848>] smc_pnet_find_roce_resource+0x1d8/0x310 [smc] [572555.253011] [<000003ff800602f0>] __smc_connect+0x1f0/0x3e0 [smc] [572555.253015] [<000003ff80060634>] smc_connect+0x154/0x190 [smc] [572555.253022] [<00000000acbed8d4>] __sys_connect+0x94/0xd0 [572555.253025] [<00000000acbef620>] __s390x_sys_socketcall+0x170/0x360 [572555.253028] [<00000000acdc6800>] system_call+0x298/0x2b8 [572555.253030] INFO: lockdep is turned off. Function smc_pnet_find_rdma_dev() might be called from smc_pnet_find_roce_resource(). It holds the smc_ib_devices list spinlock while calling infiniband op get_netdev(). At least for mlx5 the get_netdev operation wants mutex serialization, which conflicts with the smc_ib_devices spinlock. This patch switches the smc_ib_devices spinlock into a mutex to allow sleeping when calling get_netdev(). Fixes: a4cf0443c414 ("smc: introduce SMC as an IB-client") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net/smc: fix work request handlingKarsten Graul
Wait for pending sends only when smc_switch_conns() found a link to move the connections to. Do not wait during link freeing, this can lead to permanent hang situations. And refuse to provide a new tx slot on an unusable link. Fixes: c6f02ebeea3a ("net/smc: switch connections to alternate link") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net/smc: separate LLC wait queues for flow and messagesKarsten Graul
There might be races in scenarios where both SMC link groups are on the same system. Prevent that by creating separate wait queues for LLC flows and messages. Switch to non-interruptable versions of wait_event() and wake_up() for the llc flow waiter to make sure the waiters get control sequentially. Fine tune the llc_flow_lock to include the assignment of the message. Write to system log when an unexpected message was dropped. And remove an extra indirection and use the existing local variable lgr in smc_llc_enqueue(). Fixes: 555da9af827d ("net/smc: add event-based llc_flow framework") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net: atlantic: fix ip dst and ipv6 address filtersDmitry Bogdanov
This patch fixes ip dst and ipv6 address filters. There were 2 mistakes in the code, which led to the issue: * invalid register was used for ipv4 dst address; * incorrect write order of dwords for ipv6 addresses. Fixes: 23e7a718a49b ("net: aquantia: add rx-flow filter definitions") Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by: Alexander Lobakin <alobakin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08Documentation: update for gcc 4.9 requirementRandy Dunlap
Update Documentation for the gcc v4.9 upgrade requirement. Fixes: 5429ef62bcf3 ("compiler/gcc: Raise minimum GCC version for kernel builds to 4.8") Fixes: 6ec4476ac825 ("Raise gcc version requirement to 4.9") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-08Merge tag 'sound-5.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small, mostly device-specific fixes. The significant one is the regression fix for USB-audio implicit feedback devices due to the incorrect frame size calculation, which landed in 5.8 and stable trees. In addition, a few usual HD-audio and USB-audio quirks, Intel HDMI fixes, ASoC fsl and rt5682 fixes, as well as the fix in compress-offload partial drain operation" * tag 'sound-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: compress: fix partial_drain completion state ALSA: usb-audio: Add implicit feedback quirk for RTX6001 ALSA: usb-audio: add quirk for MacroSilicon MS2109 ALSA: hda/realtek: Enable headset mic of Acer Veriton N4660G with ALC269VC ALSA: hda/realtek: Enable headset mic of Acer C20-820 with ALC269VC ALSA: hda/realtek - Enable audio jacks of Acer vCopperbox with ALC269VC ALSA: hda/realtek - Fix Lenovo Thinkpad X1 Carbon 7th quirk subdevice id ALSA: hda/hdmi: improve debug traces for stream lookups ALSA: hda/hdmi: fix failures at PCM open on Intel ICL and later ALSA: opl3: fix infoleak in opl3 ALSA: usb-audio: Replace s/frame/packet/ where appropriate ALSA: usb-audio: Fix packet size calculation AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module ALSA: hda - let hs_mic be picked ahead of hp_mic ASoC: rt5682: fix the pop noise while OMTP type headset plugin ASoC: fsl_mqs: Fix unchecked return value for clk_prepare_enable ASoC: fsl_mqs: Don't check clock is NULL before calling clk API
2020-07-08Raise gcc version requirement to 4.9Linus Torvalds
I realize that we fairly recently raised it to 4.8, but the fact is, 4.9 is a much better minimum version to target. We have a number of workarounds for actual bugs in pre-4.9 gcc versions (including things like internal compiler errors on ARM), but we also have some syntactic workarounds for lacking features. In particular, raising the minimum to 4.9 means that we can now just assume _Generic() exists, which is likely the much better replacement for a lot of very convoluted built-time magic with conditionals on sizeof and/or __builtin_choose_expr() with same_type() etc. Using _Generic also means that you will need to have a very recent version of 'sparse', but thats easy to build yourself, and much less of a hassle than some old gcc version can be. The latest (in a long string) of reasons for minimum compiler version upgrades was commit 5435f73d5c4a ("efi/x86: Fix build with gcc 4"). Ard points out that RHEL 7 uses gcc-4.8, but the people who stay back on old RHEL versions persumably also don't build their own kernels anyway. And maybe they should cross-built or just have a little side affair with a newer compiler? Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-08Replace HTTP links with HTTPS ones: ATMEL MACB ETHERNET DRIVERAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08net: dsa: loop: Print when registration is successfulFlorian Fainelli
We have a number of error conditions that can lead to the driver not probing successfully, move the print when we are sure dsa_register_switch() has suceeded. This avoids repeated prints in case of probe deferral for instance. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08dm: use noio when sending kobject eventMikulas Patocka
kobject_uevent may allocate memory and it may be called while there are dm devices suspended. The allocation may recurse into a suspended device, causing a deadlock. We must set the noio flag when sending a uevent. The observed deadlock was reported here: https://www.redhat.com/archives/dm-devel/2020-March/msg00025.html Reported-by: Khazhismel Kumykov <khazhy@google.com> Reported-by: Tahsin Erdogan <tahsin@google.com> Reported-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-07-08dm zoned: Fix zone reclaim triggerDamien Le Moal
Only triggering reclaim based on the percentage of unmapped cache zones can fail to detect cases where reclaim is needed, e.g. if the target has only 2 or 3 cache zones and only one unmapped cache zone, the percentage of free cache zones is higher than DMZ_RECLAIM_LOW_UNMAP_ZONES (30%) and reclaim does not trigger. This problem, combined with the fact that dmz_schedule_reclaim() is called from dmz_handle_bio() without the map lock held, leads to a race between zone allocation and dmz_should_reclaim() result. Depending on the workload applied, this race can lead to the write path waiting forever for a free zone without reclaim being triggered. Fix this by moving dmz_schedule_reclaim() inside dmz_alloc_zone() under the map lock. This results in checking the need for zone reclaim whenever a new data or buffer zone needs to be allocated. Also fix dmz_reclaim_percentage() to always return 0 if the number of unmapped cache (or random) zones is less than or equal to 1. Suggested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>