summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-25xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).Mathias Nyman
A second regression was found in the immediate data transfer (IDT) support which was added to 5.2 kernel IDT is used to transfer small amounts of data (up to 8 bytes) in the field normally used for data dma address, thus avoiding dma mapping. If the data was not already dma mapped, then IDT support assumed data was in urb->transfer_buffer, and did not take into accound that even small amounts of data (8 bytes) can be in a scatterlist instead. This caused a NULL pointer dereference when sg_dma_len() was used with non-dma mapped data. Solve this by not using IDT if scatter gather buffer list is used. Fixes: 33e39350ebd2 ("usb: xhci: add Immediate Data Transfer support") Cc: <stable@vger.kernel.org> # v5.2 Reported-by: Maik Stohn <maik.stohn@seal-one.com> Tested-by: Maik Stohn <maik.stohn@seal-one.com> CC: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1564044861-1445-1-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream portLucas Stach
This is a partial revert of 73d31def1aab "usb: usb251xb: Create a ports field collector method", which broke a existing devicetree (arch/arm64/boot/dts/freescale/imx8mq.dtsi). There is no reason why the swap-dx-lanes property should not apply to the upstream port. The reason given in the breaking commit was that it's inconsitent with respect to other port properties, but in fact it is not. All other properties which only apply to the downstream ports explicitly reject port 0, so there is pretty strong precedence that the driver referred to the upstream port as port 0. So there is no inconsistency in this property at all, other than the swapping being also applicable to the upstream port. CC: stable@vger.kernel.org #5.2 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20190719084407.28041-3-l.stach@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25Revert "usb: usb251xb: Add US port lanes inversion property"Lucas Stach
This property isn't needed and not yet used anywhere. The swap-dx-lanes property is perfectly fine for doing the swap on the upstream port lanes. CC: stable@vger.kernel.org #5.2 Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20190719084407.28041-2-l.stach@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25Revert "usb: usb251xb: Add US lanes inversion dts-bindings"Lucas Stach
This reverts commit 3342ce35a1, as there is no need for this separate property and it breaks compatibility with existing devicetree files (arch/arm64/boot/dts/freescale/imx8mq.dtsi). CC: stable@vger.kernel.org #5.2 Fixes: 3342ce35a183 ("usb: usb251xb: Add US lanes inversion dts-bindings") Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20190719084407.28041-1-l.stach@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25iomap: fix Invalid License IDMasahiro Yamada
Detected by: $ ./scripts/spdxcheck.py fs/iomap/Makefile: 1:27 Invalid License ID: GPL-2.0-or-newer Fixes: 1c230208f53d ("iomap: start moving code to fs/iomap/") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers againMasahiro Yamada
The "WITH Linux-syscall-note" exception exists for headers exported to user space. It is strange to add it to non-exported headers. Commit 687a3e4d8e61 ("treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers") did cleanups some months ago, but it looks like we need to do this periodically. This patch was generated by the following script: git grep -l -e Linux-syscall-note \ -- :*.h :^arch/*/include/uapi/asm/*.h :^include/uapi/ :^tools | while read file do sed -i -e 's/(\(GPL-[^[:space:]]*\) WITH Linux-syscall-note)/\1/g' \ -e 's/ WITH Linux-syscall-note//g' $file done I did not commit drivers/staging/android/uapi/ion.h . This header is not currently exported, but somebody may plan to move it to include/uapi/ when the time comes. I am not sure. Anyway, it will be better to check the license inconsistency in drivers/staging/android/uapi/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headersMasahiro Yamada
UAPI headers licensed under GPL are supposed to have exception "WITH Linux-syscall-note" so that they can be included into non-GPL user space application code. The exception note is missing in some UAPI headers. Some of them slipped in by the treewide conversion commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license"). Just run: $ git show --oneline b24413180f56 -- arch/x86/include/uapi/asm/ I believe they are not intentional, and should be fixed too. This patch was generated by the following script: git grep -l --not -e Linux-syscall-note --and -e SPDX-License-Identifier \ -- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild | while read file do sed -i -e '/[[:space:]]OR[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \ -e '/[[:space:]]or[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \ -e '/[[:space:]]OR[[:space:]]/!{/[[:space:]]or[[:space:]]/!s/\(GPL-[^[:space:]]*\)/\1 WITH Linux-syscall-note/g}' $file done After this patch is applied, there are 5 UAPI headers that do not contain "WITH Linux-syscall-note". They are kept untouched since this exception applies only to GPL variants. $ git grep --not -e Linux-syscall-note --and -e SPDX-License-Identifier \ -- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild include/uapi/drm/panfrost_drm.h:/* SPDX-License-Identifier: MIT */ include/uapi/linux/batman_adv.h:/* SPDX-License-Identifier: MIT */ include/uapi/linux/qemu_fw_cfg.h:/* SPDX-License-Identifier: BSD-3-Clause */ include/uapi/linux/vbox_err.h:/* SPDX-License-Identifier: MIT */ include/uapi/linux/virtio_iommu.h:/* SPDX-License-Identifier: BSD-3-Clause */ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()
2019-07-25usb: wusbcore: fix unbalanced get/put cluster_idPhong Tran
syzboot reported that https://syzkaller.appspot.com/bug?extid=fd2bd7df88c606eea4ef There is not consitency parameter in cluste_id_get/put calling. In case of getting the id with result is failure, the wusbhc->cluster_id will not be updated and this can not be used for wusb_cluster_id_put(). Tested report https://groups.google.com/d/msg/syzkaller-bugs/0znZopp3-9k/oxOrhLkLEgAJ Reproduce and gdb got the details: 139 addr = wusb_cluster_id_get(); (gdb) n 140 if (addr == 0) (gdb) print addr $1 = 254 '\376' (gdb) n 142 result = __hwahc_set_cluster_id(hwahc, addr); (gdb) print result $2 = -71 (gdb) break wusb_cluster_id_put Breakpoint 3 at 0xffffffff836e3f20: file drivers/usb/wusbcore/wusbhc.c, line 384. (gdb) s Thread 2 hit Breakpoint 3, wusb_cluster_id_put (id=0 '\000') at drivers/usb/wusbcore/wusbhc.c:384 384 id = 0xff - id; (gdb) n 385 BUG_ON(id >= CLUSTER_IDS); (gdb) print id $3 = 255 '\377' Reported-by: syzbot+fd2bd7df88c606eea4ef@syzkaller.appspotmail.com Signed-off-by: Phong Tran <tranmanphong@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190724020601.15257-1-tranmanphong@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem()Dan Carpenter
The devm_memremap() function doesn't return NULL, it returns error pointers. Fixes: b0310c2f09bb ("USB: use genalloc for USB HCs with local memory") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20190607135709.GC16718@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25usb-storage: Add a limitation for blk_queue_max_hw_sectors()Yoshihiro Shimoda
This patch fixes an issue that the following error happens on swiotlb environment: xhci-hcd ee000000.usb: swiotlb buffer is full (sz: 524288 bytes), total 32768 (slots), used 1338 (slots) On the kernel v5.1, block settings of a usb-storage with SuperSpeed were the following so that the block layer will allocate buffers up to 64 KiB, and then the issue didn't happen. max_segment_size = 65536 max_hw_sectors_kb = 1024 After the commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary") is applied, the block settings are the following. So, the block layer will allocate buffers up to 1024 KiB, and then the issue happens: max_segment_size = 4294967295 max_hw_sectors_kb = 1024 To fix the issue, the usb-storage driver checks the maximum size of a mapping for the device and then adjusts the max_hw_sectors_kb if required. After this patch is applied, the block settings will be the following, and then the issue doesn't happen. max_segment_size = 4294967295 max_hw_sectors_kb = 256 Fixes: 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary") Cc: stable <stable@vger.kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/1563793105-20597-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25usb: pci-quirks: Minor cleanup for AMD PLL quirkRyan Kennedy
usb_amd_find_chipset_info() is used for chipset detection for several quirks. It is strange that its return value indicates the need for the PLL quirk, which means it is often ignored. This patch adds a function specifically for checking the PLL quirk like the other ones. Additionally, rename probe_result to something more appropriate. Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-3-ryan5544@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25usb: pci-quirks: Correct AMD PLL quirk detectionRyan Kennedy
The AMD PLL USB quirk is incorrectly enabled on newer Ryzen chipsets. The logic in usb_amd_find_chipset_info currently checks for unaffected chipsets rather than affected ones. This broke once a new chipset was added in e788787ef. It makes more sense to reverse the logic so it won't need to be updated as new chipsets are added. Note that the core of the workaround in usb_amd_quirk_pll does correctly check the chipset. Signed-off-by: Ryan Kennedy <ryan5544@gmail.com> Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume") Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25ALSA: hda - Add a conexant codec entry to let mute led workHui Wang
This conexant codec isn't in the supported codec list yet, the hda generic driver can drive this codec well, but on a Lenovo machine with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI to make the leds work. After adding this codec to the list, the driver patch_conexant.c will apply THINKPAD_ACPI to this machine. Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-25objtool: Improve UACCESS coveragePeter Zijlstra
A clang build reported an (obvious) double CLAC while a GCC build did not; it turns out that objtool only re-visits instructions if the first visit was with AC=0. If OTOH the first visit was with AC=1, it completely ignores any subsequent visit, even when it has AC=0. Fix this by using a visited mask instead of a boolean, and (explicitly) mark the AC state. $ ./objtool check -b --no-fp --retpoline --uaccess drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0x22: redundant UACCESS disable drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xea: (alt) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0xffffffffffffffff: (branch) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xd9: (alt) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0xb2: (branch) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0x39: (branch) drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: eb_copy_relocations.isra.34()+0x0: <=== (func) Reported-by: Josh Poimboeuf <jpoimboe@redhat.com> Reported-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/617 Link: https://lkml.kernel.org/r/5359166aad2d53f3145cd442d83d0e5115e0cd17.1564007838.git.jpoimboe@redhat.com
2019-07-25ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chipsTakashi Iwai
It turned out that the recent Intel HD-audio controller chips show a significant stall during the system PM resume intermittently. It doesn't happen so often and usually it may read back successfully after one or more seconds, but in some rare worst cases the driver went into fallback mode. After trial-and-error, we found out that the communication stall seems covered by issuing the sync after each verb write, as already done for AMD and other chipsets. So this patch enables the write-sync flag for the recent Intel chips, Skylake and onward, as a workaround. Also, since Broxton and co have the very same driver flags as Skylake, refer to the Skylake driver flags instead of defining the same contents again for simplification. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201901 Reported-and-tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-24dt-bindings: interrupt-controller: al-fic: remove redundant bindingTalel Shenhar
Remove dt binding description for standard binding. Signed-off-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-24ktest: Fix some typos in config-bisect.plMasanari Iida
This patch fixes some spelling typos in config-bisect.pl Link: http://lkml.kernel.org/r/20190723032445.14220-1-standby24x7@gmail.com Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-07-24access: avoid the RCU grace period for the temporary subjective credentialsLinus Torvalds
It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU work because it installs a temporary credential that gets allocated and freed for each system call. The allocation and freeing overhead is mostly benign, but because credentials can be accessed under the RCU read lock, the freeing involves a RCU grace period. Which is not a huge deal normally, but if you have a lot of access() calls, this causes a fair amount of seconday damage: instead of having a nice alloc/free patterns that hits in hot per-CPU slab caches, you have all those delayed free's, and on big machines with hundreds of cores, the RCU overhead can end up being enormous. But it turns out that all of this is entirely unnecessary. Exactly because access() only installs the credential as the thread-local subjective credential, the temporary cred pointer doesn't actually need to be RCU free'd at all. Once we're done using it, we can just free it synchronously and avoid all the RCU overhead. So add a 'non_rcu' flag to 'struct cred', which can be set by users that know they only use it in non-RCU context (there are other potential users for this). We can make it a union with the rcu freeing list head that we need for the RCU case, so this doesn't need any extra storage. Note that this also makes 'get_current_cred()' clear the new non_rcu flag, in case we have filesystems that take a long-term reference to the cred and then expect the RCU delayed freeing afterwards. It's not entirely clear that this is required, but it makes for clear semantics: the subjective cred remains non-RCU as long as you only access it synchronously using the thread-local accessors, but you _can_ use it as a generic cred if you want to. It is possible that we should just remove the whole RCU markings for ->cred entirely. Only ->real_cred is really supposed to be accessed through RCU, and the long-term cred copies that nfs uses might want to explicitly re-enable RCU freeing if required, rather than have get_current_cred() do it implicitly. But this is a "minimal semantic changes" change for the immediate problem. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Glauber <jglauber@marvell.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com> Cc: Greg KH <greg@kroah.com> Cc: Kees Cook <keescook@chromium.org> Cc: David Howells <dhowells@redhat.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-24Merge tag 'powerpc-5.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "An assortment of non-regression fixes that have accumulated since the start of the merge window. - A fix for a user triggerable oops on machines where transactional memory is disabled, eg. Power9 bare metal, Power8 with TM disabled on the command line, or all Power7 or earlier machines. - Three fixes for handling of PMU and power saving registers when running nested KVM on Power9. - Two fixes for bugs found while stress testing the XIVE interrupt controller code, also on Power9. - A fix to allow guests to boot under Qemu/KVM on Power9 using the the Hash MMU with >= 1TB of memory. - Two fixes for bugs in the recent DMA cleanup, one of which could lead to checkstops. - And finally three fixes for the PAPR SCM nvdimm driver. Thanks to: Alexey Kardashevskiy, Andrea Arcangeli, Cédric Le Goater, Christoph Hellwig, David Gibson, Gautham R. Shenoy, Michael Neuling, Oliver O'Halloran, Satheesh Rajendran, Shawn Anastasio, Suraj Jitindar Singh, Vaibhav Jain" * tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/papr_scm: Force a scm-unbind if initial scm-bind fails powerpc/papr_scm: Update drc_pmem_unbind() to use H_SCM_UNBIND_ALL powerpc/pseries: Update SCM hcall op-codes in hvcall.h powerpc/tm: Fix oops on sigreturn on systems without TM powerpc/dma: Fix invalid DMA mmap behavior KVM: PPC: Book3S HV: XIVE: fix rollback when kvmppc_xive_create fails powerpc/xive: Fix loop exit-condition in xive_find_target_in_mask() powerpc: fix off by one in max_zone_pfn initialization for ZONE_DMA KVM: PPC: Book3S HV: Save and restore guest visible PSSCR bits on pseries powerpc/pmu: Set pmcregs_in_use in paca when running as LPAR KVM: PPC: Book3S HV: Always save guest pmu for guest capable of nesting powerpc/mm: Limit rma_size to 1TB when running without HV mode
2019-07-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Bugfixes, a pvspinlock optimization, and documentation moving" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption Documentation: move Documentation/virtual to Documentation/virt KVM: nVMX: Set cached_vmcs12 and cached_shadow_vmcs12 NULL after free KVM: X86: Dynamically allocate user_fpu KVM: X86: Fix fpu state crash in kvm guest Revert "kvm: x86: Use task structs fpu field for user" KVM: nVMX: Clear pending KVM_REQ_GET_VMCS12_PAGES when leaving nested
2019-07-24Merge tag 'dma-mapping-5.3-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping regression fix from Christoph Hellwig: "Ensure that dma_addressing_limited doesn't crash on devices without a dma mask (Eric Auger)" * tag 'dma-mapping-5.3-2' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: use dma_get_mask in dma_addressing_limited
2019-07-24selinux: check sidtab limit before adding a new entryOndrej Mosnacek
We need to error out when trying to add an entry above SIDTAB_MAX in sidtab_reverse_lookup() to avoid overflow on the odd chance that this happens. Cc: stable@vger.kernel.org Fixes: ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-07-24dt-bindings: clk: allwinner,sun4i-a10-ccu: Correct path in $idRob Herring
The path in the schema '$id' value is wrong. Fix it. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-clk@vger.kernel.org Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-24KVM: X86: Boost queue head vCPU to mitigate lock waiter preemptionWanpeng Li
Commit 11752adb (locking/pvqspinlock: Implement hybrid PV queued/unfair locks) introduces hybrid PV queued/unfair locks - queued mode (no starvation) - unfair mode (good performance on not heavily contended lock) The lock waiter goes into the unfair mode especially in VMs with over-commit vCPUs since increaing over-commitment increase the likehood that the queue head vCPU may have been preempted and not actively spinning. However, reschedule queue head vCPU timely to acquire the lock still can get better performance than just depending on lock stealing in over-subscribe scenario. Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM: ebizzy -M vanilla boosting improved 1VM 23520 25040 6% 2VM 8000 13600 70% 3VM 3100 5400 74% The lock holder vCPU yields to the queue head vCPU when unlock, to boost queue head vCPU which is involuntary preemption or the one which is voluntary halt due to fail to acquire the lock after a short spin in the guest. Cc: Waiman Long <longman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-24x86/entry/32: Pass cr2 to do_async_page_fault()Matt Mullins
Commit a0d14b8909de ("x86/mm, tracing: Fix CR2 corruption") added the address parameter to do_async_page_fault(), but does not pass it from the 32-bit entry point. To plumb it through, factor-out common_exception_read_cr2 in the same fashion as common_exception, and uses it from both page_fault and async_page_fault. For a 32-bit KVM guest, this fixes: Run /sbin/init as init process Starting init: /sbin/init exists but couldn't execute it (error -14) Fixes: a0d14b8909de ("x86/mm, tracing: Fix CR2 corruption") Signed-off-by: Matt Mullins <mmullins@fb.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20190724042058.24506-1-mmullins@fb.com
2019-07-24fpga-manager: altera-ps-spi: Fix build errorYueHaibing
If BITREVERSE is m and FPGA_MGR_ALTERA_PS_SPI is y, build fails: drivers/fpga/altera-ps-spi.o: In function `altera_ps_write': altera-ps-spi.c:(.text+0x4ec): undefined reference to `byte_rev_table' Select BITREVERSE to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: fcfe18f885f6 ("fpga-manager: altera-ps-spi: use bitrev8x4") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20190708071356.50928-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-24mei: me: add mule creek canyon (EHL) device idsAlexander Usyskin
Add Mule Creek Canyon (PCH) MEI device ids for Elkhart Lake (EHL) Platform. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190712095814.20746-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-24binder: prevent transactions to context manager from its own process.Hridya Valsaraju
Currently, a transaction to context manager from its own process is prevented by checking if its binder_proc struct is the same as that of the sender. However, this would not catch cases where the process opens the binder device again and uses the new fd to send a transaction to the context manager. Reported-by: syzbot+8b3c354d33c4ac78bfad@syzkaller.appspotmail.com Signed-off-by: Hridya Valsaraju <hridya@google.com> Acked-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190715191804.112933-1-hridya@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-24binder: Set end of SG buffer area properly.Martijn Coenen
In case the target node requests a security context, the extra_buffers_size is increased with the size of the security context. But, that size is not available for use by regular scatter-gather buffers; make sure the ending of that buffer is marked correctly. Acked-by: Todd Kjos <tkjos@google.com> Fixes: ec74136ded79 ("binder: create node flag to request sender's security context") Signed-off-by: Martijn Coenen <maco@android.com> Cc: stable@vger.kernel.org # 5.1+ Link: https://lore.kernel.org/r/20190709110923.220736-1-maco@android.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-24Documentation: move Documentation/virtual to Documentation/virtChristoph Hellwig
Renaming docs seems to be en vogue at the moment, so fix on of the grossly misnamed directories. We usually never use "virtual" as a shortcut for virtualization in the kernel, but always virt, as seen in the virt/ top-level directory. Fix up the documentation to match that. Fixes: ed16648eb5b8 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-23scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPGHannes Reinecke
Retrying immediately after we've received a 'transitioning' sense code is pretty much pointless, we should always use a delay before retrying. So ensure the default delay is applied before retrying. Signed-off-by: Hannes Reinecke <hare@suse.com> Tested-by: Zhangguanghui <zhang.guanghui@h3c.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23scsi: ibmvfc: fix WARN_ON during event pool releaseTyrel Datwyler
While removing an ibmvfc client adapter a WARN_ON like the following WARN_ON is seen in the kernel log: WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541 ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc] CPU: 6 PID: 5421 Comm: rmmod Tainted: G E 4.17.0-rc1-next-20180419-autotest #1 NIP: d00000000290328c LR: d00000000290325c CTR: c00000000036ee20 REGS: c000000288d1b7e0 TRAP: 0700 Tainted: G E (4.17.0-rc1-next-20180419-autotest) MSR: 800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 44008828 XER: 20000000 CFAR: c00000000036e408 SOFTE: 1 GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448 GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001 GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640 GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598 GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0 GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100 GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8 NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc] LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] Call Trace: [c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable) [c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc] [c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100 [c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0 [c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100 [c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140 [c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0 [c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50 [c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc] [c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0 [c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c Instruction dump: e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200 2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028 This is tripped as a result of irqs being disabled during the call to dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path we have quiesced the adapter and its overly paranoid anyways to be holding the host lock. Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23scsi: fcoe: fix a typoChristophe JAILLET
#define relative to FCOE CTLR start with FCOE_CTLR, except FCOE_CTRL_SOL_TOV. This is likely a typo and CTRL should be CTLR here as well. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23scsi: megaraid_sas: Make some functions staticYueHaibing
Fix sparse warnings: drivers/scsi/megaraid/megaraid_sas_fusion.c:541:1: warning: symbol 'megasas_alloc_cmdlist_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:580:1: warning: symbol 'megasas_alloc_request_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:661:1: warning: symbol 'megasas_alloc_reply_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:738:1: warning: symbol 'megasas_alloc_rdpq_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:920:1: warning: symbol 'megasas_alloc_cmds_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:1740:1: warning: symbol 'megasas_init_adapter_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:1966:1: warning: symbol 'map_cmd_status' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:2379:1: warning: symbol 'megasas_set_pd_lba' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:2718:1: warning: symbol 'megasas_build_ldio_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:3215:1: warning: symbol 'megasas_build_io_fusion' was not declared. Should it be static? drivers/scsi/megaraid/megaraid_sas_fusion.c:3328:6: warning: symbol 'megasas_prepare_secondRaid1_IO' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23scsi: megaraid_sas: fix panic on loading firmware crashdumpJunxiao Bi
While loading fw crashdump in function fw_crash_buffer_show(), left bytes in one dma chunk was not checked, if copying size over it, overflow access will cause kernel panic. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23scsi: megaraid_sas: fix spelling mistake "megarid_sas" -> "megaraid_sas"Colin Ian King
Fix spelling mistake in kernel warning message and replace printk with with pr_warn. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-23Merge branch 'parisc-5.3-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Fix build issues when kprobes are enabled - Speed up ITLB/DTLB cache flushes when running on machines with combined TLBs * 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines parisc: add kprobe_fault_handler()
2019-07-23Merge tag 'perf-urgent-for-mingo-5.3-20190723' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf.data: Alexey Budankov: - Fix loading of compressed data split across adjacent records Jiri Olsa: - Fix buffer size setting for processing CPU topology perf.data header. perf stat: Jiri Olsa: - Fix segfault for event group in repeat mode Cong Wang: - Always separate "stalled cycles per insn" line, it was being appended to the "instructions" line. perf script: Andi Kleen: - Fix --max-blocks man page description. - Improve man page description of metrics. - Fix off by one in brstackinsn IPC computation. perf probe: Arnaldo Carvalho de Melo: - Avoid calling freeing routine multiple times for same pointer. perf build: - Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings treated as errors, breaking the build. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-23drm/amd/display: Set enabled to false at start of audio disableNicholas Kazlauskas
[Why] In an effort to stop redundant calls to dce110_disable_audio_stream the audio->enabled flag was added to the audio resource struct. While this state probably shouldn't have been tracked on the audio struct itself it still works fine for some sequences. However, it does not work for cases where we're freeing the audio resource (such as hotplugs) or when dynamic audio is enabled. In these cases the pipe_ctx->stream_res.audio = NULL before we can set audio->enabled = false. The next time we acquire the audio resource such as on hotplug the audio will not be enabled for the stream since DC thinks it's still enabled. Audio state tracking should cover this sequence. [How] Set audio->enabled = false at the start as long as we have pipe_ctx->stream_res.audio. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-23Merge tag 'imx-fixes-5.3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.3: - Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration. - Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation. - Fix typo of clock frequency property name in a few i.MX6UL board I2C buses. - Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible with i.MX6SX SAI. * tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mq: fix SAI compatible arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1 ARM: dts: imx6ul: fix clock frequency property name of I2C buses ARM: dts: imx7ulp: Fix usb-phy unit address format Link: https://lore.kernel.org/r/20190723090827.GU15632@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23ARM: defconfig: u8500: Add new driversLinus Walleij
This enables the new or updates driver options for U8500 that got merged into v5.3-rc1: - CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver enabled by default bringing up the new graphics support. Include the LOGO so we can see when the graphics are live. - We use the IIO hwmon bridge for reflecting temperature in the system. - Set MUSB to PIO mode as this is the one working most stable for the time being. - HWSPINLOCK needs to be set to get the hardware semaphore driver to compile and link properly. Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23ARM: defconfig: u8500: Refresh defconfigLinus Walleij
This refreshes the outdated U8500 defconfig: some options moved around, PS/2 mouse is no longer default on, crypto options moved around etc. Link: https://lore.kernel.org/r/20190723081523.13079-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-muxArnd Bergmann
The mdio-bus-mux has no #address-cells/#size-cells property, which causes a few dtc warnings: arch/arm/boot/dts/bcm47094-linksys-panamera.dts:129.4-18: Warning (reg_format): /mdio-bus-mux/mdio@200:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #address-cells value arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #size-cells value Add the normal cell numbers. Link: https://lore.kernel.org/r/20190722145618.1155492-1-arnd@arndb.de Fixes: 2bebdfcdcd0f ("ARM: dts: BCM5301X: Add support for Linksys EA9500") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23ARM: davinci: fix sleep.S build error on ARMv4Arnd Bergmann
When building a multiplatform kernel that includes armv4 support, the default target CPU does not support the blx instruction, which leads to a build failure: arch/arm/mach-davinci/sleep.S: Assembler messages: arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode Add a .arch statement in the sources to make this file build. Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.de Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23Revert "nvme-pci: don't create a read hctx mapping without read queues"yangerkun
This reverts commit 0298d5435276e7795b0b939d74827f6e775e7009. With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0' in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps equals to 2 and nvme_pci_map_queues will not do map for poll queues. Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: fix multipath crash when ANA is deactivatedMarta Rybczynska
Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. The driver then tries to access unallocated buffer when connecting to a nvme target. The signature is as follows: [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192). [ 300.435387] nvme nvme0: disabling ANA support. [ 300.437835] nvme nvme0: creating 4 I/O queues. [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009 [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 300.466342] #PF error: [normal kernel read fault] [ 300.467385] PGD 0 P4D 0 [ 300.467987] Oops: 0000 [#1] SMP PTI [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4 [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.494991] Call Trace: [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core] [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core] [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core] [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core] [ 300.500717] ? __switch_to_asm+0x35/0x70 [ 300.501663] process_one_work+0x171/0x380 [ 300.502340] worker_thread+0x49/0x3f0 [ 300.503079] kthread+0xf8/0x130 [ 300.503795] ? max_active_store+0x80/0x80 [ 300.504690] ? kthread_bind+0x10/0x10 [ 300.505502] ret_from_fork+0x35/0x40 [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio [ 300.514984] CR2: 0000000000000008 [ 300.515569] ---[ end trace faa2eefad7e7f218 ]--- [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.533264] Kernel panic - not syncing: Fatal exception [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]--- Condition check refactoring from Christoph Hellwig. Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu> Tested-by: Jean-Baptiste Riaux <jbriaux@kalray.eu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: fix memory leak caused by incorrect subsystem freeLogan Gunthorpe
When freeing the subsystem after finding another match with __nvme_find_get_subsystem(), use put_device() instead of __nvme_release_subsystem() which calls kfree() directly. Per the documentation, put_device() should always be used after device_initialization() is called. Otherwise, leaks like the one below which was detected by kmemleak may occur. Once the call of __nvme_release_subsystem() is removed it no longer makes sense to keep the helper, so fold it back into nvme_release_subsystem(). unreferenced object 0xffff8883d12bfbc0 (size 16): comm "nvme", pid 2635, jiffies 4294933602 (age 739.952s) hex dump (first 16 bytes): 6e 76 6d 65 2d 73 75 62 73 79 73 32 00 88 ff ff nvme-subsys2.... backtrace: [<000000007d8fc208>] __kmalloc_track_caller+0x16d/0x2a0 [<0000000081169e5f>] kvasprintf+0xad/0x130 [<0000000025626f25>] kvasprintf_const+0x47/0x120 [<00000000fa66ad36>] kobject_set_name_vargs+0x44/0x120 [<000000004881f8b3>] dev_set_name+0x98/0xc0 [<000000007124dae3>] nvme_init_identify+0x1995/0x38e0 [<000000009315020a>] nvme_loop_configure_admin_queue+0x4fa/0x5e0 [<000000001a63e766>] nvme_loop_create_ctrl+0x489/0xf80 [<00000000a46ecc23>] nvmf_dev_write+0x1a12/0x2220 [<000000002259b3d5>] __vfs_write+0x66/0x120 [<000000002f6df81e>] vfs_write+0x154/0x490 [<000000007e8cfc19>] ksys_write+0x10a/0x240 [<00000000ff5c7b85>] __x64_sys_write+0x73/0xb0 [<00000000fee6d692>] do_syscall_64+0xaa/0x470 [<00000000997e1ede>] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ab9e00cc72fa ("nvme: track subsystems") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23nvme: ignore subnqn for ADATA SX6000LNPMisha Nasledov
The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a system with more than one of these SSDs will only have one usable. [ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C). [ 0.943017] nvme nvme1: Removing after probe failure status: -22 02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01) 71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01) There are no firmware updates available from the vendor, unfortunately. Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves the issue, and they all work after this patch: /dev/nvme0n1 2J1120050420 ADATA SX6000LNP [...] /dev/nvme1n1 2J1120050540 ADATA SX6000LNP [...] Signed-off-by: Misha Nasledov <misha@nasledov.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23dma-mapping: use dma_get_mask in dma_addressing_limitedEric Auger
We currently have cases where the dma_addressing_limited() gets called with dma_mask unset. This causes a NULL pointer dereference. Use dma_get_mask() accessor to prevent the crash. Fixes: b866455423e0 ("dma-mapping: add a dma_addressing_limited helper") Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 02:25:14 +0000