summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-02-22net: thunderx: add mutex to protect mailbox from concurrent calls for same VFVadim Lomovtsev
In some cases it could happen that nicvf_send_msg_to_pf() could be called concurrently for the same NIC VF, and thus re-writing mailbox contents and breaking messaging sequence with PF by re-writing NICVF data. This commit is to implement mutex for NICVF to protect mailbox registers and NICVF messaging control data from concurrent access. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: rework xcast message structure to make it fit into 64 bitVadim Lomovtsev
To communicate to PF each of ThunderX NIC VF uses mailbox which is pair of 64 bit registers available to both VFn and PF. This commit is to change the xcast message structure in order to fit it into 64 bit. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: add nicvf_send_msg_to_pf result check for set_rx_mode_taskVadim Lomovtsev
The rx_set_mode invokes number of messages to be send to PF for receive mode configuration. In case if there any issues we need to stop sending messages and release allocated memory. This commit is to implement check of nicvf_msg_send_to_pf() result. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: make CFG_DONE message to run through generic send-ack sequenceVadim Lomovtsev
At the end of NIC VF initialization VF sends CFG_DONE message to PF without using nicvf_msg_send_to_pf routine. This potentially could re-write data in mailbox. This commit is to implement common way of sending CFG_DONE message by the same way with other configuration messages by using nicvf_send_msg_to_pf() routine. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to ↵Vadim Lomovtsev
private for each of them. Having one work queue for receive mode configuration ndo_set_rx_mode() call for all VFs results in making each of them wait till the set_rx_mode() call completes for another VF if any of close, set receive mode and change flags calls being already invoked. Potentially this could cause device state change before appropriate call of receive mode configuration completes, so the call itself became meaningless, corrupt data or break configuration sequence. We don't need any delays in NIC VF configuration sequence so having delayed work call with 0 delay has no sense. This commit is to implement one work queue for each NIC VF for set_rx_mode task and to let them work independently and replacing delayed_work with work_struct. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: correct typo in macro nameVadim Lomovtsev
Correct STREERING to STEERING at macro name for BGX steering register. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: ip6_gre: fix possible NULL pointer dereference in ip6erspan_set_versionLorenzo Bianconi
Fix a possible NULL pointer dereference in ip6erspan_set_version checking nlattr data pointer kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 7549 Comm: syz-executor432 Not tainted 5.0.0-rc6-next-20190218 #37 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ip6erspan_set_version+0x5c/0x350 net/ipv6/ip6_gre.c:1726 Code: 07 38 d0 7f 08 84 c0 0f 85 9f 02 00 00 49 8d bc 24 b0 00 00 00 c6 43 54 01 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 02 00 00 4d 8b ac 24 b0 00 00 00 4d 85 ed 0f RSP: 0018:ffff888089ed7168 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8880869d6e58 RCX: 0000000000000000 RDX: 0000000000000016 RSI: ffffffff862736b4 RDI: 00000000000000b0 RBP: ffff888089ed7180 R08: 1ffff11010d3adcb R09: ffff8880869d6e58 R10: ffffed1010d3add5 R11: ffff8880869d6eaf R12: 0000000000000000 R13: ffffffff8931f8c0 R14: ffffffff862825d0 R15: ffff8880869d6e58 FS: 0000000000b3d880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000184 CR3: 0000000092cc5000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6erspan_newlink+0x66/0x7b0 net/ipv6/ip6_gre.c:2210 __rtnl_newlink+0x107b/0x16c0 net/core/rtnetlink.c:3176 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3234 rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:631 ___sys_sendmsg+0x806/0x930 net/socket.c:2136 __sys_sendmsg+0x105/0x1d0 net/socket.c:2174 __do_sys_sendmsg net/socket.c:2183 [inline] __se_sys_sendmsg net/socket.c:2181 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2181 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440159 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffa69156e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440159 RDX: 0000000000000000 RSI: 0000000020001340 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000001 R09: 00000000004002c8 R10: 0000000000000011 R11: 0000000000000246 R12: 00000000004019e0 R13: 0000000000401a70 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace 09f8a7d13b4faaa1 ]--- RIP: 0010:ip6erspan_set_version+0x5c/0x350 net/ipv6/ip6_gre.c:1726 Code: 07 38 d0 7f 08 84 c0 0f 85 9f 02 00 00 49 8d bc 24 b0 00 00 00 c6 43 54 01 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9a 02 00 00 4d 8b ac 24 b0 00 00 00 4d 85 ed 0f RSP: 0018:ffff888089ed7168 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8880869d6e58 RCX: 0000000000000000 RDX: 0000000000000016 RSI: ffffffff862736b4 RDI: 00000000000000b0 RBP: ffff888089ed7180 R08: 1ffff11010d3adcb R09: ffff8880869d6e58 R10: ffffed1010d3add5 R11: ffff8880869d6eaf R12: 0000000000000000 R13: ffffffff8931f8c0 R14: ffffffff862825d0 R15: ffff8880869d6e58 FS: 0000000000b3d880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000184 CR3: 0000000092cc5000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 4974d5f678ab ("net: ip6_gre: initialize erspan_ver just for erspan tunnels") Reported-and-tested-by: syzbot+30191cf1057abd3064af@syzkaller.appspotmail.com Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22team: use operstate consistently for linkupGeorge Wilkie
When a port is added to a team, its initial state is derived from netif_carrier_ok rather than netif_oper_up. If it is carrier up but operationally down at the time of being added, the port state.linkup will be set prematurely. port state.linkup should be set consistently using netif_oper_up rather than netif_carrier_ok. Fixes: f1d22a1e0595 ("team: account for oper state") Signed-off-by: George Wilkie <gwilkie@vyatta.att-mail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: phy: aquantia: Use get_features for the PHYs abilitiesAndrew Lunn
Use the new PHY driver call to get the PHYs supported features. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: removed new config_init callback from patch] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22r8152: Fix an error on RTL8153-BD MAC Address Passthrough supportDavid Chen
RTL8153-BD is used in Dell DA300 type-C dongle. Added RTL8153-BD support to activate MAC address pass through on DA300. Apply correction on previously submitted patch in net.git tree. Signed-off-by: David Chen <david.chen7@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22ipvlan: disallow userns cap_net_admin to change global mode/flagsDaniel Borkmann
When running Docker with userns isolation e.g. --userns-remap="default" and spawning up some containers with CAP_NET_ADMIN under this realm, I noticed that link changes on ipvlan slave device inside that container can affect all devices from this ipvlan group which are in other net namespaces where the container should have no permission to make changes to, such as the init netns, for example. This effectively allows to undo ipvlan private mode and switch globally to bridge mode where slaves can communicate directly without going through hostns, or it allows to switch between global operation mode (l2/l3/l3s) for everyone bound to the given ipvlan master device. libnetwork plugin here is creating an ipvlan master and ipvlan slave in hostns and a slave each that is moved into the container's netns upon creation event. * In hostns: # ip -d a [...] 8: cilium_host@bond0: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l3 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.0.1/32 scope link cilium_host valid_lft forever preferred_lft forever [...] * Spawn container & change ipvlan mode setting inside of it: # docker run -dt --cap-add=NET_ADMIN --network cilium-net --name client -l app=test cilium/netperf 9fff485d69dcb5ce37c9e33ca20a11ccafc236d690105aadbfb77e4f4170879c # docker exec -ti client ip -d a [...] 10: cilium0@if4: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l3 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0 valid_lft forever preferred_lft forever # docker exec -ti client ip link change link cilium0 name cilium0 type ipvlan mode l2 # docker exec -ti client ip -d a [...] 10: cilium0@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0 valid_lft forever preferred_lft forever * In hostns (mode switched to l2): # ip -d a [...] 8: cilium_host@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.0.1/32 scope link cilium_host valid_lft forever preferred_lft forever [...] Same l3 -> l2 switch would also happen by creating another slave inside the container's network namespace when specifying the existing cilium0 link to derive the actual (bond0) master: # docker exec -ti client ip link add link cilium0 name cilium1 type ipvlan mode l2 # docker exec -ti client ip -d a [...] 2: cilium1@if4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 10: cilium0@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0 valid_lft forever preferred_lft forever * In hostns: # ip -d a [...] 8: cilium_host@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.0.1/32 scope link cilium_host valid_lft forever preferred_lft forever [...] One way to mitigate it is to check CAP_NET_ADMIN permissions of the ipvlan master device's ns, and only then allow to change mode or flags for all devices bound to it. Above two cases are then disallowed after the patch. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22sctp: don't compare hb_timer expire date before starting itMaciej Kwiecien
hb_timer might not start at all for a particular transport because its start is conditional. In a result a node is not sending heartbeats. Function sctp_transport_reset_hb_timer has two roles: - initial start of hb_timer for a given transport, - update expire date of hb_timer for a given transport. The function is optimized to update timer's expire only if it is before a new calculated one but this comparison is invalid for a timer which has not yet started. Such a timer has expire == 0 and if a new expire value is bigger than (MAX_JIFFIES / 2 + 2) then "time_before" macro will fail and timer will not start resulting in no heartbeat packets send by the node. This was found when association was initialized within first 5 mins after system boot due to jiffies init value which is near to MAX_JIFFIES. Test kernel version: 4.9.154 (ARCH=arm) hb_timer.expire = 0; //initialized, not started timer new_expire = MAX_JIFFIES / 2 + 2; //or more time_before(hb_timer.expire, new_expire) == false Fixes: ba6f5e33bdbb ("sctp: avoid refreshing heartbeat timer too often") Reported-by: Marcin Stojek <marcin.stojek@nokia.com> Tested-by: Marcin Stojek <marcin.stojek@nokia.com> Signed-off-by: Maciej Kwiecien <maciej.kwiecien@nokia.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Merge tag 'drm-fixes-2019-02-22' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "This contains a single i915 tiled display fix, and a set of amdgpu/radeon fixes. i915: - tiled display fix amdgpu/radeon: - runtime PM fix - bulk moves disable (fix is too large for 5.0) - a set of display fixes that are all cc'ed stable so we didn't want to leave them until -next" * tag 'drm-fixes-2019-02-22' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: disable bulk moves for now drm/amd/display: set clocks to 0 on suspend on dce80 drm/amd/display: fix optimize_bandwidth func pointer for dce80 drm/amd/display: Fix negative cursor pos programming drm/i915/fbdev: Actually configure untiled displays drm/amd/display: Raise dispclk value for dce11 drm/amd/display: Fix MST reboot/poweroff sequence drm/amdgpu: Update sdma golden setting for vega20 drm/amdgpu: Set DPM_FLAG_NEVER_SKIP when enabling PM-runtime gpu: drm: radeon: Set DPM_FLAG_NEVER_SKIP when enabling PM-runtime
2019-02-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Small set of three regression fixing patches, things are looking pretty good here. - Fix cxgb4 to work again with non-4k page sizes - NULL pointer oops in SRP during sg_reset" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: iw_cxgb4: cq/qp mask depends on bar2 pages in a host page cxgb4: Export sge_host_page_size to ulds RDMA/srp: Rework SCSI device reset handling
2019-02-22KVM: MMU: record maximum physical address width in kvm_mmu_extended_roleYu Zhang
Previously, commit 7dcd57552008 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") offered some optimization to avoid the unnecessary reconfiguration. Yet one scenario is broken - when cpuid changes VM's maximum physical address width, reconfiguration is needed to reset the reserved bits. Also, the TDP may need to reset its shadow_root_level when this value is changed. To fix this, a new field, maxphyaddr, is introduced in the extended role structure to keep track of the configured guest physical address width. Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-22kvm: x86: Return LA57 feature based on hardware capabilityYu Zhang
Previously, 'commit 372fddf70904 ("x86/mm: Introduce the 'no5lvl' kernel parameter")' cleared X86_FEATURE_LA57 in boot_cpu_data, if Linux chooses to not run in 5-level paging mode. Yet boot_cpu_data is queried by do_cpuid_ent() as the host capability later when creating vcpus, and Qemu will not be able to detect this feature and create VMs with LA57 feature. As discussed earlier, VMs can still benefit from extended linear address width, e.g. to enhance features like ASLR. So we would like to fix this, by return the true hardware capability when Qemu queries. Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-22x86/kvm/mmu: fix switch between root and guest MMUsVitaly Kuznetsov
Commit 14c07ad89f4d ("x86/kvm/mmu: introduce guest_mmu") brought one subtle change: previously, when switching back from L2 to L1, we were resetting MMU hooks (like mmu->get_cr3()) in kvm_init_mmu() called from nested_vmx_load_cr3() and now we do that in nested_ept_uninit_mmu_context() when we re-target vcpu->arch.mmu pointer. The change itself looks logical: if nested_ept_init_mmu_context() changes something than nested_ept_uninit_mmu_context() restores it back. There is, however, one thing: the following call chain: nested_vmx_load_cr3() kvm_mmu_new_cr3() __kvm_mmu_new_cr3() fast_cr3_switch() cached_root_available() now happens with MMU hooks pointing to the new MMU (root MMU in our case) while previously it was happening with the old one. cached_root_available() tries to stash current root but it is incorrect to read current CR3 with mmu->get_cr3(), we need to use old_mmu->get_cr3() which in case we're switching from L2 to L1 is guest_mmu. (BTW, in shadow page tables case this is a non-issue because we don't switch MMU). While we could've tried to guess that we're switching between MMUs and call the right ->get_cr3() from cached_root_available() this seems to be overly complicated. Instead, just stash the corresponding CR3 when setting root_hpa and make cached_root_available() use the stashed value. Fixes: 14c07ad89f4d ("x86/kvm/mmu: introduce guest_mmu") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-22KEYS: always initialize keyring_index_key::desc_lenEric Biggers
syzbot hit the 'BUG_ON(index_key->desc_len == 0);' in __key_link_begin() called from construct_alloc_key() during sys_request_key(), because the length of the key description was never calculated. The problem is that we rely on ->desc_len being initialized by search_process_keyrings(), specifically by search_nested_keyrings(). But, if the process isn't subscribed to any keyrings that never happens. Fix it by always initializing keyring_index_key::desc_len as soon as the description is set, like we already do in some places. The following program reproduces the BUG_ON() when it's run as root and no session keyring has been installed. If it doesn't work, try removing pam_keyinit.so from /etc/pam.d/login and rebooting. #include <stdlib.h> #include <unistd.h> #include <keyutils.h> int main(void) { int id = add_key("keyring", "syz", NULL, 0, KEY_SPEC_USER_KEYRING); keyctl_setperm(id, KEY_OTH_WRITE); setreuid(5000, 5000); request_key("user", "desc", "", id); } Reported-by: syzbot+ec24e95ea483de0a24da@syzkaller.appspotmail.com Fixes: b2a4df200d57 ("KEYS: Expand the capacity of a keyring") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: James Morris <james.morris@microsoft.com>
2019-02-22KEYS: user: Align the payload bufferEric Biggers
Align the payload of "user" and "logon" keys so that users of the keyrings service can access it as a struct that requires more than 2-byte alignment. fscrypt currently does this which results in the read of fscrypt_key::size being misaligned as it needs 4-byte alignment. Align to __alignof__(u64) rather than __alignof__(long) since in the future it's conceivable that people would use structs beginning with u64, which on some platforms would require more than 'long' alignment. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Fixes: 2aa349f6e37c ("[PATCH] Keys: Export user-defined keyring operations") Fixes: 88bd6ccdcdd6 ("ext4 crypto: add encryption key management facilities") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-02-22Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A few more fixes for clk drivers causing regressions this release. Two Allwinner index fixes for A31 and V3 and two Microchip AT91 fixes for an incorrect clk parent linkage and a miscalculated number of clks" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: at91: fix masterck name clk: at91: fix at91sam9x5 peripheral clock number clk: sunxi: A31: Fix wrong AHB gate number clk: sunxi-ng: v3s: Fix TCON reset de-assert bit
2019-02-22bpf, lpm: fix lookup bug in map_delete_elemAlban Crequy
trie_delete_elem() was deleting an entry even though it was not matching if the prefixlen was correct. This patch adds a check on matchlen. Reproducer: $ sudo bpftool map create /sys/fs/bpf/mylpm type lpm_trie key 8 value 1 entries 128 name mylpm flags 1 $ sudo bpftool map update pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 aa bb cc dd value hex 01 $ sudo bpftool map dump pinned /sys/fs/bpf/mylpm key: 10 00 00 00 aa bb cc dd value: 01 Found 1 element $ sudo bpftool map delete pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 ff ff ff ff $ echo $? 0 $ sudo bpftool map dump pinned /sys/fs/bpf/mylpm Found 0 elements A similar reproducer is added in the selftests. Without the patch: $ sudo ./tools/testing/selftests/bpf/test_lpm_map test_lpm_map: test_lpm_map.c:485: test_lpm_delete: Assertion `bpf_map_delete_elem(map_fd, key) == -1 && errno == ENOENT' failed. Aborted With the patch: test_lpm_map runs without errors. Fixes: e454cf595853 ("bpf: Implement map_delete_elem for BPF_MAP_TYPE_LPM_TRIE") Cc: Craig Gallek <kraig@google.com> Signed-off-by: Alban Crequy <alban@kinvolk.io> Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-22Merge tag 'mvebu-fixes-5.0-2' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
arm/fixes mvebu fixes for 5.0 (part 2) Fix PHY reset signal on clearfog gt 8K (Armada 8040 based) Fix NAND description on Armada XP boards which was broken since a few release * tag 'mvebu-fixes-5.0-2' of git://git.infradead.org/linux-mvebu: arm64: dts: clearfog-gt-8k: fix SGMII PHY reset signal ARM: dts: armada-xp: fix Armada XP boards NAND description Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-22Merge tag 'omap-for-v5.0/fixes-rc7-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Two am335x ethernet phy mode fixes for v5.0-rc cycle Recent changes with commit cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") broke Ethernet on am335x-evmsk, and turns out some device driver fixes are needed. Even without the driver fixes, am335x needs to run in rgmii-id mode instead rgmii-txid mode. Things have been working based on luck as the broken driver has been configuring rgmii-id mode. Let's fix that as that way things work as they're supposed to work from hardware wiring point of view. * tag 'omap-for-v5.0/fixes-rc7-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-evm: Fix PHY mode for ethernet ARM: dts: am335x-evmsk: Fix PHY mode for ethernet Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-22mac80211: allocate tailroom for forwarded mesh packetsFelix Fietkau
Forwarded packets enter the tx path through ieee80211_add_pending_skb, which skips the ieee80211_skb_resize call. Fixes WARN_ON in ccmp_encrypt_skb and resulting packet loss. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22rhashtable: Remove obsolete rhashtable_walk_init functionHerbert Xu
The rhashtable_walk_init function has been obsolete for more than two years. This patch finally converts its last users over to rhashtable_walk_enter and removes it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: Use rhashtable_lookup_get_insert_fast instead of racy codeHerbert Xu
The code in mesh_path_add tries to handle the case where a duplicate entry is added to the rhashtable by doing a lookup after a failed insertion. It also tries to handle races by repeating the insertion should the lookup fail. This is now unnecessary as we have rhashtable API functions that can directly return the mathcing object. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg
Merge net-next to resolve a conflict and to get the mac80211 rhashtable fixes so further patches can be applied on top. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: update HE IEs to D3.3Liad Kaufman
Update element names and new fields according to D3.3 of the HE spec. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: allow sending vendor events unicastJohannes Berg
Sometimes, we may want to transport higher bandwidth data through vendor events, and in that case sending it multicast is a bad idea. Allow vendor events to be unicast. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: ignore quiet mode in probeSara Sharon
Some buggy APs keep the CSA IE in probes after the channel switch was completed and can silence us for no good reason. Apply quiet mode only from beacons. If there is real channel switch going on, we will see the beacon anyway. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: allow CSA to self with immediate quietSara Sharon
Currently, due to some buggy APs that continue to include CSA IEs after the switch, we ignore CSA to same channel. However, some other APs may do CSA to self in order to have immediate quiet. Allow it. Do it only for beacons. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: notify driver on subsequent CSA beaconsSara Sharon
Some drivers may want to track further the CSA beacons, for example to compensate for buggy APs that change the beacon count or quiet mode during CSA flow. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: fix position of vendor_data readLiad Kaufman
The ieee80211_vendor_radiotap was read from the beginning of the skb->data regardless of the existence of other elements in radiotap that would cause it to move to another position. Fix this by taking into account where it really should be. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22radiotap: add 0-length PSDU "not captured" typeJohannes Berg
This type was defined in radiotap but we didn't add it to the header file, add it now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: abort CSA if beacon does not include CSA IEsSara Sharon
In case we receive a beacon without CSA IE while we are in the middle of channel switch - abort the operation. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: support max channel switch time elementSara Sharon
2018 REVmd of the spec introduces the max channel switch time element which is optionally included in beacons/probes when there is a channel switch / extended channel switch element. The value represents the maximum delay between the time the AP transmitted the last beacon in current channel and the expected time of the first beacon in the new channel, in TU. Parse the value and pass it to the driver. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: Report Association Request frame IEs in association eventsJouni Malinen
This extends the NL80211_CMD_ASSOCIATE event case to report NL80211_ATTR_REQ_IE similarly to what is already done with the NL80211_CMD_CONNECT events if the driver provides this information. In practice, this adds (Re)Association Request frame information element reporting to mac80211 drivers for the cases where user space SME is used. This provides more information for user space to figure out which capabilities were negotiated for the association. For example, this can be used to determine whether HT, VHT, or HE is used. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: pmsr: use eth_broadcast_addr() to assign broadcast addressMao Wenan
This patch is to use eth_broadcast_addr() to assign broadcast address insetad of memset(). Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: Change default tx_sk_pacing_shift to 7Toke Høiland-Jørgensen
When we did the original tests for the optimal value of sk_pacing_shift, we came up with 6 ms of buffering as the default. Sadly, 6 is not a power of two, so when picking the shift value I erred on the size of less buffering and picked 4 ms instead of 8. This was probably wrong; those 2 ms of extra buffering makes a larger difference than I thought. So, change the default pacing shift to 7, which corresponds to 8 ms of buffering. The point of diminishing returns really kicks in after 8 ms, and so having this as a default should cut down on the need for extensive per-device testing and overrides needed in the drivers. Cc: stable@vger.kernel.org Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211_hwsim: propagate genlmsg_reply return codeLi RongQing
genlmsg_reply can fail, so propagate its return code Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22Merge branch 'pm-cpufreq-fixes'Rafael J. Wysocki
* pm-cpufreq-fixes: cpufreq: scmi: Fix use-after-free in scmi_cpufreq_exit()
2019-02-21rocker: Add missing break for PRE_BRIDGE_FLAGSFlorian Fainelli
A missing break keyword should have been added after adding support for PRE_BRIDGE_FLAGS. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 93700458ff63 ("rocker: Check Handle PORT_PRE_BRIDGE_FLAGS") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== code optimizations & bugfixes for HNS3 driver This patchset includes bugfixes and code optimizations for the HNS3 ethernet controller driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: clear command queue's registers when unloading VF driverHuazhong Tan
According to the hardware's description, the driver should clear the command queue's registers when uloading VF driver. Otherwise, these existing value may lead the IMP get into a wrong state. Fixes: fedd0c15d288 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: uninitialize command queue while unloading PF driverHuazhong Tan
According to the hardware's description, the driver should clear the command queue's registers when uloading driver. Otherwise, these existing value may lead the IMP get into a wrong state. Also this patch adds hclge_cmd_uninit() to do the command queue uninitialization which includes clearing registers and freeing memory. Fixes: 68c0a5c70614 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: Record VF vlan tablesliuzhongzhu
Record the vlan tables that the VF sends to the chip. After the VF exception, the PF actively clears the VF to chip config. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: Record VF unicast and multicast tablesliuzhongzhu
Record the unicast and multicast tables that the VF sends to the chip. After the VF exception, the PF actively clears the VF to chip config. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: fix 6th bit of ppp mpf abnormal errorsWeihang Li
This patch modify print message of 6th bit of ppp mpf abnormal errors, there is a extra letter e in it. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: enable 8~11th bit of mac common msi-x errorWeihang Li
These bits are enabled now and have been test. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: some bugfix of ppu(rcb) ras errorsWeihang Li
The 3rd and 4th of PPU(RCB) PF Abnormal is RAS errors instead of MSI-X like other bits. This patch adds process of handling and logging this two bits. Otherwise, this patch modifies print message of 28th and 29th bit of PPU MPF Abnormal errors, which keep same with other errors now. Fixes: f69b10b317f9 ("net: hns3: handle hw errors of PPU(RCB)") Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 23:41:05 +0000