| Age | Commit message (Collapse) | Author |
|---|
|
We already cap down the actual max_sectors to the max of the hardware
and user limit, so don't reject the configuration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240326060745.2349154-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit 8e756373d7c8 ("block: Move bio merge related functions into
blk-merge.c"), blk_rq_set_mixed_merge() has only been referenced in
blk-merge.c, so make it static.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240325083501.2816408-1-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The reason is described in 5033ad566016 ("MIPS: move unselectable
entries out of the "CPU type" choice").
At the same time, commit 101bd58fde10 ("MIPS: Add support for Mobileye
EyeQ5") introduced another unselectable choice member.
(In fact, 5033ad566016 and 101bd58fde10 have the same commit time.)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 5d7107c72796 ("perf: CXL Performance Monitoring Unit driver")
added the config entries for CXL_PMU in drivers/cxl/Kconfig and
drivers/perf/Kconfig, so it can be toggled from multiple locations:
[1] Device Drivers
-> PCI support
-> CXL (Compute Expres Link) Devices
-> CXL Performance Monitoring Unit
[2] Device Drivers
-> Performance monitor support
-> CXL Performance Monitoring Unit
This complicates things, and nobody else does this.
I kept the one in drivers/perf/Kconfig because CONFIG_CXL_PMU controls
the compilation of drivers/perf/cxl_pmu.c.
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Prevent scheduling in an atomic context when printk() takes over the
console flushing duty
* tag 'printk-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Update @console_may_schedule in console_trylock_spinning()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"This contains a single fix for a regression introduced in v5.18-rc1
which made the img pwm driver fail to bind"
* tag 'pwm/for-6.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: img: fix pwm clock lookup
|
|
In response to my patch removing the "wait for HPD" logic at the
beginning of the MSM DP transfer() callback [1], we had some debate
about what the "This is an optional function" meant in the
documentation of the wait_hpd_asserted() callback. Let's clarify.
As talked about in the MSM DP patch [1], before wait_hpd_asserted()
was introduced there was no great way for panel drivers to wait for
HPD in the case that the "built-in" HPD signal was used. Panel drivers
could only wait for HPD if a GPIO was used. At the time, we ended up
just saying that if we were using the "built-in" HPD signal that DP
AUX controllers needed to wait for HPD themselves at the beginning of
their transfer() callback. The fact that the wait for HPD at the
beginning of transfer() was awkward/problematic was the whole reason
wait_hpd_asserted() was added.
Let's make it obvious that if a DP AUX controller implements
wait_hpd_asserted() that they don't need a loop waiting for HPD at the
start of their transfer() function. We'll still allow DP controllers
to work the old way but mark it as deprecated.
[1] https://lore.kernel.org/r/20240315143621.v2.3.I535606f6d4f7e3e5588bb75c55996f61980183cd@changeid
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319135836.v2.1.I521dad0693cc24fe4dd14cba0c7048d94f5b6b41@changeid
|
|
There are reports from tree-checker that detects corrupted nodes,
without any obvious pattern so possibly an overwrite in memory.
After some debugging it turns out there's a race when reading an extent
buffer the uptodate status can be missed.
To prevent concurrent reads for the same extent buffer,
read_extent_buffer_pages() performs these checks:
/* (1) */
if (test_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags))
return 0;
/* (2) */
if (test_and_set_bit(EXTENT_BUFFER_READING, &eb->bflags))
goto done;
At this point, it seems safe to start the actual read operation. Once
that completes, end_bbio_meta_read() does
/* (3) */
set_extent_buffer_uptodate(eb);
/* (4) */
clear_bit(EXTENT_BUFFER_READING, &eb->bflags);
Normally, this is enough to ensure only one read happens, and all other
callers wait for it to finish before returning. Unfortunately, there is
a racey interleaving:
Thread A | Thread B | Thread C
---------+----------+---------
(1) | |
| (1) |
(2) | |
(3) | |
(4) | |
| (2) |
| | (1)
When this happens, thread B kicks of an unnecessary read. Worse, thread
C will see UPTODATE set and return immediately, while the read from
thread B is still in progress. This race could result in tree-checker
errors like this as the extent buffer is concurrently modified:
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
Fix it by testing UPTODATE again after setting the READING bit, and if
it's been set, skip the unnecessary read.
Fixes: d7172f52e993 ("btrfs: use per-buffer locking for extent_buffer reading")
Link: https://lore.kernel.org/linux-btrfs/CAHk-=whNdMaN9ntZ47XRKP6DBes2E5w7fi-0U3H2+PS18p+Pzw@mail.gmail.com/
Link: https://lore.kernel.org/linux-btrfs/f51a6d5d7432455a6a858d51b49ecac183e0bbc9.1706312914.git.wqu@suse.com/
Link: https://lore.kernel.org/linux-btrfs/c7241ea4-fcc6-48d2-98c8-b5ea790d6c89@gmx.com/
CC: stable@vger.kernel.org # 6.5+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor update of changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When attempting to exclusive open a device which has no exclusive open
permission, such as a physical device associated with the flakey dm
device, the open operation will fail, resulting in a mount failure.
In this particular scenario, we erroneously return -EINVAL instead of the
correct error code provided by the bdev_open_by_path() function, which is
-EBUSY.
Fix this, by returning error code from the bdev_open_by_path() function.
With this correction, the mount error message will align with that of
ext4 and xfs.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit f4a9f219411f ("btrfs: do not delete unused block group if it may be
used soon") changed the behaviour of deleting unused block-groups on zoned
filesystems. Starting with this commit, we're using
btrfs_space_info_used() to calculate the number of used bytes in a
space_info. But btrfs_space_info_used() also accounts
btrfs_space_info::bytes_zone_unusable as used bytes.
So if a block group is 100% zone_unusable it is skipped from the deletion
step.
In order not to skip fully zone_unusable block-groups, also check if the
block-group has bytes left that can be used on a zoned filesystem.
Fixes: f4a9f219411f ("btrfs: do not delete unused block group if it may be used soon")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_add_extent_mapping(), if we failed to merge the extent map, which
is unexpected and theoretically should never happen, we use WARN_ONCE() to
log a message which is not great because we don't get information about
which filesystem it relates to in case we have multiple btrfs filesystems
mounted. So change this to use btrfs_warn() and surround the error check
with WARN_ON() so we always get a useful stack trace and the condition is
flagged as "unlikely" since it's not expected to ever happen.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_add_extent_mapping(), if we are unable to merge the existing
extent map, we print a warning message that suggests interval ranges in
the form "[X, Y)", where the first element is the inclusive start offset
of a range and the second element is the exclusive end offset. However
we end up printing the length of the ranges instead of the exclusive end
offsets. So fix this by printing the range end offsets.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At unpin_extent_range() we print warning messages that are supposed to
print an interval in the form "[X, Y)", with the first element being an
inclusive start offset and the second element being the exclusive end
offset of a range. However we end up printing the range's length instead
of the range's exclusive end offset, so fix that to avoid having confusing
and non-sense messages in case we hit one of these unexpected scenarios.
Fixes: 00deaf04df35 ("btrfs: log messages at unpin_extent_range() during unexpected cases")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At unpin_extent_cache() if we happen to find an extent map with an
unexpected start offset, we jump to the 'out' label and never release the
reference we added to the extent map through the call to
lookup_extent_mapping(), therefore resulting in a leak. So fix this by
moving the free_extent_map() under the 'out' label.
Fixes: c03c89f821e5 ("btrfs: handle errors returned from unpin_extent_cache()")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Boris managed to create a device capable of changing its maj:min without
altering its device path.
Only multi-devices can be scanned. A device that gets scanned and remains
in the btrfs kernel cache might end up with an incorrect maj:min.
Despite the temp-fsid feature patch did not introduce this bug, it could
lead to issues if the above multi-device is converted to a single device
with a stale maj:min. Subsequently, attempting to mount the same device
with the correct maj:min might mistake it for another device with the same
fsid, potentially resulting in wrongly auto-enabling the temp-fsid feature.
To address this, this patch validates the device's maj:min at the time of
device open and updates it if it has changed since the last scan.
CC: stable@vger.kernel.org # 6.7+
Fixes: a5b8a5f9f835 ("btrfs: support cloned-device mount capability")
Reported-by: Boris Burkov <boris@bur.io>
Co-developed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Boris Burkov <boris@bur.io>#
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Shinichiro reported the following use-after-free triggered by the device
replace operation in fstests btrfs/070.
BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0
==================================================================
BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs]
Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007
CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0x200/0x3e0
kasan_report+0xd8/0x110
? do_zone_finish+0x91a/0xb90 [btrfs]
? do_zone_finish+0x91a/0xb90 [btrfs]
do_zone_finish+0x91a/0xb90 [btrfs]
btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs]
? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs]
? btrfs_put_root+0x2d/0x220 [btrfs]
? btrfs_clean_one_deleted_snapshot+0x299/0x430 [btrfs]
cleaner_kthread+0x21e/0x380 [btrfs]
? __pfx_cleaner_kthread+0x10/0x10 [btrfs]
kthread+0x2e3/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 3493983:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_alloc_device+0xb3/0x4e0 [btrfs]
device_list_add.constprop.0+0x993/0x1630 [btrfs]
btrfs_scan_one_device+0x219/0x3d0 [btrfs]
btrfs_control_ioctl+0x26e/0x310 [btrfs]
__x64_sys_ioctl+0x134/0x1b0
do_syscall_64+0x99/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 3494056:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3f/0x60
poison_slab_object+0x102/0x170
__kasan_slab_free+0x32/0x70
kfree+0x11b/0x320
btrfs_rm_dev_replace_free_srcdev+0xca/0x280 [btrfs]
btrfs_dev_replace_finishing+0xd7e/0x14f0 [btrfs]
btrfs_dev_replace_by_ioctl+0x1286/0x25a0 [btrfs]
btrfs_ioctl+0xb27/0x57d0 [btrfs]
__x64_sys_ioctl+0x134/0x1b0
do_syscall_64+0x99/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
The buggy address belongs to the object at ffff8881543c8000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 96 bytes inside of
freed 1024-byte region [ffff8881543c8000, ffff8881543c8400)
The buggy address belongs to the physical page:
page:00000000fe2c1285 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1543c8
head:00000000fe2c1285 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0017ffffc0000840 ffff888100042dc0 ffffea0019e8f200 dead000000000002
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881543c7f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881543c7f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8881543c8000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881543c8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881543c8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
This UAF happens because we're accessing stale zone information of a
already removed btrfs_device in do_zone_finish().
The sequence of events is as follows:
btrfs_dev_replace_start
btrfs_scrub_dev
btrfs_dev_replace_finishing
btrfs_dev_replace_update_device_in_mapping_tree <-- devices replaced
btrfs_rm_dev_replace_free_srcdev
btrfs_free_device <-- device freed
cleaner_kthread
btrfs_delete_unused_bgs
btrfs_zone_finish
do_zone_finish <-- refers the freed device
The reason for this is that we're using a cached pointer to the chunk_map
from the block group, but on device replace this cached pointer can
contain stale device entries.
The staleness comes from the fact, that btrfs_block_group::physical_map is
not a pointer to a btrfs_chunk_map but a memory copy of it.
Also take the fs_info::dev_replace::rwsem to prevent
btrfs_dev_replace_update_device_in_mapping_tree() from changing the device
underneath us again.
Note: btrfs_dev_replace_update_device_in_mapping_tree() is holding
fs_info::mapping_tree_lock, but as this is a spinning read/write lock we
cannot take it as the call to blkdev_zone_mgmt() requires a memory
allocation which may not sleep.
But btrfs_dev_replace_update_device_in_mapping_tree() is always called with
the fs_info::dev_replace::rwsem held in write mode.
Many thanks to Shinichiro for analyzing the bug.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
CC: stable@vger.kernel.org # 6.8
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
====================
Link: https://lore.kernel.org/r/20240325124311.1866197-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, loopback test may be skipped when resetting, but the test
result will still show as 'PASS', because the driver doesn't set
ETH_TEST_FL_FAILED flag. Fix it by setting the flag and
initializating the value to UNEXECUTED.
Fixes: 4c8dab1c709c ("net: hns3: reconstruct function hns3_self_test")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash. This patch fixes this by taking devl_lock during initialization.
Fixes: b741269b2759 ("net: hns3: add support for registering devlink for PF")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, hns hardware supports more than 512 queues and the index limit
in hclge_comm_tqps_update_stats is wrong. So this patch removes it.
Fixes: 287db5c40d15 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
SEV-SNP requires encrypted memory to be validated before access.
Because the ROM memory range is not part of the e820 table, it is not
pre-validated by the BIOS. Therefore, if a SEV-SNP guest kernel wishes
to access this range, the guest must first validate the range.
The current SEV-SNP code does indeed scan the ROM range during early
boot and thus attempts to validate the ROM range in probe_roms().
However, this behavior is neither sufficient nor necessary for the
following reasons:
* With regards to sufficiency, if EFI_CONFIG_TABLES are not enabled and
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK is set, the kernel will
attempt to access the memory at SMBIOS_ENTRY_POINT_SCAN_START (which
falls in the ROM range) prior to validation.
For example, Project Oak Stage 0 provides a minimal guest firmware
that currently meets these configuration conditions, meaning guests
booting atop Oak Stage 0 firmware encounter a problematic call chain
during dmi_setup() -> dmi_scan_machine() that results in a crash
during boot if SEV-SNP is enabled.
* With regards to necessity, SEV-SNP guests generally read garbage
(which changes across boots) from the ROM range, meaning these scans
are unnecessary. The guest reads garbage because the legacy ROM range
is unencrypted data but is accessed via an encrypted PMD during early
boot (where the PMD is marked as encrypted due to potentially mapping
actually-encrypted data in other PMD-contained ranges).
In one exceptional case, EISA probing treats the ROM range as
unencrypted data, which is inconsistent with other probing.
Continuing to allow SEV-SNP guests to use garbage and to inconsistently
classify ROM range encryption status can trigger undesirable behavior.
For instance, if garbage bytes appear to be a valid signature, memory
may be unnecessarily reserved for the ROM range. Future code or other
use cases may result in more problematic (arbitrary) behavior that
should be avoided.
While one solution would be to overhaul the early PMD mapping to always
treat the ROM region of the PMD as unencrypted, SEV-SNP guests do not
currently rely on data from the ROM region during early boot (and even
if they did, they would be mostly relying on garbage data anyways).
As a simpler solution, skip the ROM range scans (and the otherwise-
necessary range validation) during SEV-SNP guest early boot. The
potential SEV-SNP guest crash due to lack of ROM range validation is
thus avoided by simply not accessing the ROM range.
In most cases, skip the scans by overriding problematic x86_init
functions during sme_early_init() to SNP-safe variants, which can be
likened to x86_init overrides done for other platforms (ex: Xen); such
overrides also avoid the spread of cc_platform_has() checks throughout
the tree.
In the exceptional EISA case, still use cc_platform_has() for the
simplest change, given (1) checks for guest type (ex: Xen domain status)
are already performed here, and (2) these checks occur in a subsys
initcall instead of an x86_init function.
[ bp: Massage commit message, remove "we"s. ]
Fixes: 9704c07bf9f7 ("x86/kernel: Validate ROM memory before accessing when SEV-SNP is active")
Signed-off-by: Kevin Loughlin <kevinloughlin@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20240313121546.2964854-1-kevinloughlin@google.com
|
|
The show and store callback routines for the "disable" sysfs attribute
file in port.c acquire the device lock for the port's parent hub
device. This can cause problems if another process has locked the hub
to remove it or change its configuration:
Removing the hub or changing its configuration requires the
hub interface to be removed, which requires the port device
to be removed, and device_del() waits until all outstanding
sysfs attribute callbacks for the ports have returned. The
lock can't be released until then.
But the disable_show() or disable_store() routine can't return
until after it has acquired the lock.
The resulting deadlock can be avoided by calling
sysfs_break_active_protection(). This will cause the sysfs core not
to wait for the attribute's callback routine to return, allowing the
removal to proceed. The disadvantage is that after making this call,
there is no guarantee that the hub structure won't be deallocated at
any moment. To prevent this, we have to acquire a reference to it
first by calling hub_get().
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/f7a8c135-a495-4ce6-bd49-405a45e7ea9a@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Create hub_get() and hub_put() routines to encapsulate the kref_get()
and kref_put() calls in hub.c. The new routines will be used by the
next patch in this series.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/604da420-ae8a-4a9e-91a4-2d511ff404fb@rowland.harvard.edu
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check the UCSI_CAP_GET_PD_MESSAGE bit before sending GET_PD_MESSAGE to
discover partner and cable identity, check UCSI_CAP_CABLE_DETAILS before
sending GET_CABLE_PROPERTY to discover the cable and check
UCSI_CAP_ALT_MODE_DETAILS before registering the a cable plug. Additionally,
move 8 bits from reserved_1 to features in the ucsi_capability struct. This
makes the field 16 bits, still 8 short of the 24 bits allocated for it in
UCSI v3.0, but it will not overflow because UCSI only defines 14 bits in
bmOptionalFeatures.
Fixes: 38ca416597b0 ("usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY")
Link: https://lore.kernel.org/linux-usb/44e8142f-d9b3-487b-83fe-39deadddb492@linaro.org
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Jameson Thies <jthies@google.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240315171836.343830-2-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Check the UCSI_CCI_RESET_COMPLETE complete flag before starting
another reset. Use a UCSI_SET_NOTIFICATION_ENABLE command to clear
the flag if it is set.
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-6-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some DELL systems don't like UCSI_ACK_CC_CI commands with the
UCSI_ACK_CONNECTOR_CHANGE but not the UCSI_ACK_COMMAND_COMPLETE
bit set. The current quirk still leaves room for races because
it requires two consecutive ACK commands to be sent.
Refactor and significantly simplify the quirk to fix this:
Send a dummy command and bundle the connector change ack with the
command completion ack in a single UCSI_ACK_CC_CI command.
This removes the need to probe for the quirk.
While there define flag bits for struct ucsi_acpi->flags in ucsi_acpi.c
and don't re-use definitions from ucsi.h for struct ucsi->flags.
Fixes: f3be347ea42d ("usb: ucsi_acpi: Quirk to ack a connector change ack cmd")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-5-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If a command completes the OPM must send an ack. This applies
to unsupported commands, too.
Send the required ACK for unsupported commands.
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-4-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The completion notification for the final SET_NOTIFICATION_ENABLE
command during initialization can include a connector change
notification. However, at the time this completion notification is
processed, the ucsi struct is not ready to handle this notification.
As a result the notification is ignored and the controller
never sends an interrupt again.
Re-check CCI for a pending connector state change after
initialization is complete. Adjust the corresponding debug
message accordingly.
Fixes: 71a1fa0df2a3 ("usb: typec: ucsi: Store the notification mask")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-3-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Suppose we sleep on the PPM lock after clearing the EVENT_PENDING
bit because the thread for another connector is executing a command.
In this case the command completion of the other command will still
report the connector change for our connector.
Clear the EVENT_PENDING bit under the PPM lock to avoid another
useless call to ucsi_handle_connector_change() in this case.
Fixes: c9aed03a0a68 ("usb: ucsi: Add missing ppm_lock")
Cc: stable <stable@kernel.org>
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240320073927.1641788-2-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The attribute writing should return the number of bytes used from the
buffer on success.
Fixes: a7cff92f0635 ("usb: typec: USB Power Delivery helpers for ports and partners")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240319074309.3306579-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is possible trigger below warning message from mass storage function,
WARNING: CPU: 6 PID: 3839 at drivers/usb/gadget/udc/core.c:294 usb_ep_queue+0x7c/0x104
pc : usb_ep_queue+0x7c/0x104
lr : fsg_main_thread+0x494/0x1b3c
Root cause is mass storage function try to queue request from main thread,
but other thread may already disable ep when function disable.
As there is no function failure in the driver, in order to avoid effort
to fix warning, change WARN_ON_ONCE() in usb_ep_queue() to pr_debug().
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@vger.kernel.org
Signed-off-by: yuan linyu <yuanlinyu@hihonor.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240315020144.2715575-1-yuanlinyu@hihonor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Intel Arrow Lake CPU uses the Meteor Lake ID with this
controller (the controller that's part of the Intel Arrow
Lake chipset (PCH) does still have unique PCI ID).
Fixes: de4b5b28c87c ("usb: dwc3: pci: add support for the Intel Arrow Lake-H")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240312115008.1748637-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the device is configured for system wakeup, then make sure that the
xHCI driver knows about it and make sure to permit wakeup only at the
appropriate time.
For host mode, if the controller goes through the dwc3 code path, then a
child xHCI platform device is created. Make sure the platform device
also inherits the wakeup setting for xHCI to enable remote wakeup.
For device mode, make sure to disable system wakeup if no gadget driver
is bound. We may experience unwanted system wakeup due to the wakeup
signal from the controller PMU detecting connection/disconnection when
in low power (D3). E.g. In the case of Steam Deck, the PCI PME prevents
the system staying in suspend.
Cc: stable@vger.kernel.org
Reported-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Closes: https://lore.kernel.org/linux-usb/70a7692d-647c-9be7-00a6-06fc60f77294@igalia.com/T/#mf00d6669c2eff7b308d1162acd1d66c09f0853c7
Fixes: d07e8819a03d ("usb: dwc3: add xHCI Host support")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Sanath S <Sanath.S@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/667cfda7009b502e08462c8fb3f65841d103cc0a.1709865476.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 75fd6485cccef269ac9eb3b71cf56753341195ef.
This patch was applied twice by accident, causing probe failures.
Revert the accident.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Fixes: 75fd6485ccce ("usb: phy: generic: Get the vbus supply")
Cc: stable <stable@kernel.org>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20240314092628.1869414-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wdm_read() cannot race with itself. However, in
service_outstanding_interrupt() it can race with the
workqueue, which can be triggered by error handling.
Hence we need to make sure that the WDM_RESPONDING
flag is not just only set but tested.
Fixes: afba937e540c9 ("USB: CDC WDM driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20240314115132.3907-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added functionality to exit from L1 state by device initiation
using remote wakeup signaling, in case when function driver queuing
request while core in L1 state.
Fixes: 273d576c4d41 ("usb: dwc2: gadget: Add functionality to exit from LPM L1 state")
Fixes: 88b02f2cb1e1 ("usb: dwc2: Add core state checking")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/b4d9de5382375dddbf7ef6049d9a82066ad87d5d.1710166393.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added exiting from the clock gating mode on USB Reset Detect interrupt
if core in the clock gating mode.
Added new condition to check core in clock gating mode or no.
Fixes: 9b4965d77e11 ("usb: dwc2: Add exit clock gating from session request interrupt")
Fixes: 5d240efddc7f ("usb: dwc2: Add exit clock gating from wakeup interrupt")
Fixes: 16c729f90bdf ("usb: dwc2: Allow exit clock gating in urb enqueue")
Fixes: 401411bbc4e6 ("usb: dwc2: Add exit clock gating before removing driver")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/cbcc2ccd37e89e339130797ed68ae4597db773ac.1708938774.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed ISOC completion flow in DDMA mode. Added isoc
descriptor actual length value and update urb's start_frame
value.
Fixed initialization of ISOC DMA descriptors flow.
Fixes: 56f5b1cff22a ("staging: Core files for the DWC2 driver")
Fixes: 20f2eb9c4cf8 ("staging: dwc2: add microframe scheduler from downstream Pi kernel")
Fixes: c17b337c1ea4 ("usb: dwc2: host: program descriptor for next frame")
Fixes: dc4c76e7b22c ("staging: HCD descriptor DMA support for the DWC2 driver")
Fixes: 762d3a1a9cd7 ("usb: dwc2: host: process all completed urbs")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/a8b1e1711cc6cabfb45d92ede12e35445c66f06c.1708944698.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Starting from core v4.30a changed order of programming
GPWRDN_PMUACTV to 0 in case of exit from hibernation on
remote wakeup signaling from device.
Fixes: c5c403dc4336 ("usb: dwc2: Add host/device hibernation functions")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/99385ec55ce73445b6fbd0f471c9bd40eb1c9b9e.1708939799.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added to backup/restore registers HFLBADDR, HCCHARi, HCSPLTi,
HCTSIZi, HCDMAi and HCDMABi.
Fixes: 58e52ff6a6c3 ("usb: dwc2: Move register save and restore functions")
Fixes: d17ee77b3044 ("usb: dwc2: add controller hibernation support")
CC: stable@vger.kernel.org
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/c2d10ee6098b9b009a8e94191e046004747d3bdd.1708945444.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As discussed on the mailing list, add myself as mwifiex driver reviewer.
Link: https://lore.kernel.org/all/20240318112830.GA9565@francesco-nb/
Signed-off-by: Francesco Dolcini <francesco@dolcini.it>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240321163420.11158-1-francesco@dolcini.it
|
|
It has been reported the commit cf3986f8c01d3 introduced a regression
when the temperature is wavering in the hysteresis region. The
mitigation stops leading to an uncontrolled temperature increase until
reaching the critical trip point.
Here what happens:
* 'throttle' is when the current temperature is greater than the trip
point temperature
* 'target' is the mitigation level
* 'passive' is positive when there is a mitigation, zero otherwise
* these values are computed in the step_wise governor
Configuration:
trip point 1: temp=95°C, hyst=5°C (passive)
trip point 2: temp=115°C, hyst=0°C (critical)
governor: step_wise
1. The temperature crosses the way up the trip point 1 at 95°C
- trend=raising
- throttle=1, target=1
- passive=1
- set_trips: low=90°C, high=115°C
2. The temperature decreases but stays in the hysteresis region at
93°C
- trend=dropping
- throttle=0, target=0
- passive=1
Before cf3986f8c01d3
- set_trips: low=90°C, high=95°C
After cf3986f8c01d3
- set_trips: low=90°C, high=115°C
3. The temperature increases a bit but stays in the hysteresis region
at 94°C (so below the trip point 1 temp 95°C)
- trend=raising
- throttle=0, target=0
- passive=1
Before cf3986f8c01d3
- set_trips: low=90°C, high=95°C
After cf3986f8c01d3
- set_trips: low=90°C, high=115°C
4. The temperature decreases but stays in the hysteresis region at
93°C
- trend=dropping
- throttle=0, target=THERMAL_NO_TARGET
- passive=0
Before cf3986f8c01d3
- set_trips: low=90°C, high=95°C
After cf3986f8c01d3
- set_trips: low=90°C, high=115°C
At this point, the 'passive' value is zero, there is no mitigation,
the temperature is in the hysteresis region, the next trip point is
115°C. As 'passive' is zero, the timer to monitor the thermal zone is
disabled. Consequently if the temperature continues to increase, no
mitigation will happen and it will reach the 115°C trip point and
reboot.
Before the optimization, the high boundary would have been 95°C, thus
triggering the mitigation again and rearming the polling timer.
The optimization make sense but given the current implementation of
the step_wise governor collaborating via this 'passive' flag with the
core framework it can not work.
From a higher perspective it seems like there is a problem between the
governor which sets a variable to be used by the core framework. That
sounds akward and it would make much more sense if the core framework
controls the governor and not the opposite. But as the devil hides in
the details, there are some subtilities to be addressed before.
Elaborating those would be out of the scope this changelog. So let's
stay simple and revert the change first to fixup all broken mobile
platforms.
This reverts commit cf3986f8c01d3 ("thermal: core: Don't update trip
points inside the hysteresis range") and takes a conflict with commit
0c0c4740c9d26 ("0c0c4740c9d2 thermal: trip: Use for_each_trip() in
__thermal_zone_set_trips()") in drivers/thermal/thermal_trip.c into
account.
Fixes: cf3986f8c01d3 ("thermal: core: Don't update trip points inside the hysteresis range")
Reported-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Cc: 6.7+ <stable@vger.kernel.org> # 6.7+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_db_walk_for_fields()
ACPICA commit 9061cd9aa131205657c811a52a9f8325a040c6c9
Errors in acpi_evaluate_object() can lead to incorrect state of buffer.
This can lead to access to data in previously ACPI_FREEd buffer and
secondary ACPI_FREE to the same buffer later.
Handle errors in acpi_evaluate_object the same way it is done earlier
with acpi_ns_handle_to_pathname.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://github.com/acpica/acpica/commit/9061cd9a
Fixes: 5fd033288a86 ("ACPICA: debugger: add command to dump all fields of particular subtype")
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-03-25
The following pull-request contains BPF updates for your *net* tree.
We've added 17 non-merge commits during the last 12 day(s) which contain
a total of 19 files changed, 184 insertions(+), 61 deletions(-).
The main changes are:
1) Fix an arm64 BPF JIT bug in BPF_LDX_MEMSX implementation's offset handling
found via test_bpf module, from Puranjay Mohan.
2) Various fixups to the BPF arena code in particular in the BPF verifier and
around BPF selftests to match latest corresponding LLVM implementation,
from Puranjay Mohan and Alexei Starovoitov.
3) Fix xsk to not assume that metadata is always requested in TX completion,
from Stanislav Fomichev.
4) Fix riscv BPF JIT's kfunc parameter incompatibility between BPF and the riscv
ABI which requires sign-extension on int/uint, from Pu Lehui.
5) Fix s390x BPF JIT's bpf_plt pointer arithmetic which triggered a crash when
testing struct_ops, from Ilya Leoshkevich.
6) Fix libbpf's arena mmap handling which had incorrect u64-to-pointer cast on
32-bit architectures, from Andrii Nakryiko.
7) Fix libbpf to define MFD_CLOEXEC when not available, from Arnaldo Carvalho de Melo.
8) Fix arm64 BPF JIT implementation for 32bit unconditional bswap which
resulted in an incorrect swap as indicated by test_bpf, from Artem Savkov.
9) Fix BPF man page build script to use silent mode, from Hangbin Liu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
riscv, bpf: Fix kfunc parameters incompatibility between bpf and riscv abi
bpf: verifier: reject addr_space_cast insn without arena
selftests/bpf: verifier_arena: fix mmap address for arm64
bpf: verifier: fix addr_space_cast from as(1) to as(0)
libbpf: Define MFD_CLOEXEC if not available
arm64: bpf: fix 32bit unconditional bswap
bpf, arm64: fix bug in BPF_LDX_MEMSX
libbpf: fix u64-to-pointer cast on 32-bit arches
s390/bpf: Fix bpf_plt pointer arithmetic
xsk: Don't assume metadata is always requested in TX completion
selftests/bpf: Add arena test case for 4Gbyte corner case
selftests/bpf: Remove hard coded PAGE_SIZE macro.
libbpf, selftests/bpf: Adjust libbpf, bpftool, selftests to match LLVM
bpf: Clarify bpf_arena comments.
MAINTAINERS: Update email address for Quentin Monnet
scripts/bpf_doc: Use silent mode when exec make cmd
bpf: Temporarily disable atomic operations in BPF arena
====================
Link: https://lore.kernel.org/r/20240325213520.26688-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When consolidating GPIO lookups in ACPI code, the debug messaging
had been reworked that the user may see
[ 13.401147] (NULL device *): using ACPI '\_SB.LEDS.led-0' for '(null)' GPIO lookup
[ 13.401378] gpio gpiochip0: Persistence not supported for GPIO 40
[ 13.401402] gpio-40 (?): no flags found for (null)
instead of
[ 14.182962] gpio gpiochip0: Persistence not supported for GPIO 40
[ 14.182994] gpio-40 (?): no flags found for gpios
The '(null)' parts are less informative and likely scare the users.
Replace them by '(default)' which can point out to the default connection
IDs, such as 'gpios'.
While at it, amend other places where con_id is used in the messages.
Reported-by: Ferry Toth <ftoth@exalondelft.nl>
Fixes: 8eb1f71e7acc ("gpiolib: consolidate GPIO lookups")
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The gpio_device_find_by_() functions do not have stubs which means that if
they are referenced from code with an optiona dependency on gpiolib then
the code will fail to link. Add stubs for lookups via fwnode and label. I
have not added a stub for plain gpio_device_find() since it seems harder to
see a use case for that which does not depend on gpiolib.
With the addition of the GPIO reset controller (which lacks a gpiolib
dependency) to the arm64 defconfig this is causing build breaks for arm64
virtconfig in -next:
aarch64-linux-gnu-ld: drivers/reset/core.o: in function `__reset_add_reset_gpio_lookup':
/build/stage/linux/drivers/reset/core.c:861:(.text+0xccc): undefined reference to `gpio_device_find_by_fwnode'
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
When an interrupt is requested, a procfs directory is created under
"/proc/irq/<irqnum>/<label>" where <label> is the string passed to one of
the request_irq() variants.
What follows is that the string must not contain the "/" character or
the procfs mkdir operation will fail. We don't have such constraints for
GPIO consumer labels which are used verbatim as interrupt labels for
GPIO irqs. We must therefore sanitize the consumer string before
requesting the interrupt.
Let's replace all "/" with ":".
Cc: stable@vger.kernel.org
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Closes: https://lore.kernel.org/linux-gpio/39fe95cb-aa83-4b8b-8cab-63947a726754@gmx.net/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
|
|
Locally generated IP multicast packets (such as the ones used in the
test) do not perform routing and simply egress the bound device.
However, as explained in commit 8bcfb4ae4d97 ("selftests: forwarding:
Fix failing tests with old libnet"), old versions of libnet (used by
mausezahn) do not use the "SO_BINDTODEVICE" socket option. Specifically,
the library started using the option for IPv6 sockets in version 1.1.6
and for IPv4 sockets in version 1.2. This explains why on Ubuntu - which
uses version 1.1.6 - the IPv4 overlay tests are failing whereas the IPv6
ones are passing.
Fix by specifying the source and destination MAC of the packets which
will cause mausezahn to use a packet socket instead of an IP socket.
Fixes: 62199e3f1658 ("selftests: net: Add VXLAN MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/5bb50349-196d-4892-8ed2-f37543aa863f@alu.unizg.hr/
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240325075030.2379513-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The dreamcastcard->timer could schedule the spu_dma_work and the
spu_dma_work could also arm the dreamcastcard->timer.
When the snd_pcm_substream is closing, the aica_channel will be
deallocated. But it could still be dereferenced in the worker
thread. The reason is that del_timer() will return directly
regardless of whether the timer handler is running or not and
the worker could be rescheduled in the timer handler. As a result,
the UAF bug will happen. The racy situation is shown below:
(Thread 1) | (Thread 2)
snd_aicapcm_pcm_close() |
... | run_spu_dma() //worker
| mod_timer()
flush_work() |
del_timer() | aica_period_elapsed() //timer
kfree(dreamcastcard->channel) | schedule_work()
| run_spu_dma() //worker
... | dreamcastcard->channel-> //USE
In order to mitigate this bug and other possible corner cases,
call mod_timer() conditionally in run_spu_dma(), then implement
PCM sync_stop op to cancel both the timer and worker. The sync_stop
op will be called from PCM core appropriately when needed.
Fixes: 198de43d758c ("[ALSA] Add ALSA support for the SEGA Dreamcast PCM device")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Message-ID: <20240326094238.95442-1-duoming@zju.edu.cn>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The remove callback of a device is called whenever it is unbound,
which may happen during runtime e.g. through sysfs, so this is not
allowed to be dropped from the binary:
WARNING: modpost: vmlinux: section mismatch in reference: einj_driver+0x8 (section: .data) -> einj_remove (section: .exit.text)
ERROR: modpost: Section mismatches detected.
Remove that annotation.
Fixes: 12fb28ea6b1c ("EINJ: Add CXL error type support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
