| Age | Commit message (Collapse) | Author |
|---|
|
Jaroslav reports Dell's OMSA Systems Management Data Engine
expects NLM_DONE in a separate recvmsg(), both for rtnl_dump_ifinfo()
and inet_dump_ifaddr(). We already added a similar fix previously in
commit 460b0d33cf10 ("inet: bring NLM_DONE out to a separate recv() again")
Instead of modifying all the dump handlers, and making them look
different than modern for_each_netdev_dump()-based dump handlers -
put the workaround in rtnetlink code. This will also help us move
the custom rtnl-locking from af_netlink in the future (in net-next).
Note that this change is not touching rtnl_dump_all(). rtnl_dump_all()
is different kettle of fish and a potential problem. We now mix families
in a single recvmsg(), but NLM_DONE is not coalesced.
Tested:
./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_addr.yaml \
--dump getaddr --json '{"ifa-family": 2}'
./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_route.yaml \
--dump getroute --json '{"rtm-family": 2}'
./cli.py --dbg-small-recv 4096 --spec netlink/specs/rt_link.yaml \
--dump getlink
Fixes: 3e41af90767d ("rtnetlink: use xarray iterator to implement rtnl_dump_ifinfo()")
Fixes: cdb2f80f1c10 ("inet: use xa_array iterator to implement inet_dump_ifaddr()")
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Link: https://lore.kernel.org/all/CAK8fFZ7MKoFSEzMBDAOjoUt+vTZRRQgLDNXEOfdCCXSoXXKE0g@mail.gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jason Xing says:
====================
tcp/mptcp: count CLOSE-WAIT for CurrEstab
Taking CLOSE-WAIT sockets into CurrEstab counters is in accordance with RFC
1213, as suggested by Eric and Neal.
v5
Link: https://lore.kernel.org/all/20240531091753.75930-1-kerneljasonxing@gmail.com/
1. add more detailed comment (Matthieu)
v4
Link: https://lore.kernel.org/all/20240530131308.59737-1-kerneljasonxing@gmail.com/
1. correct the Fixes: tag in patch [2/2]. (Eric)
Previous discussion
Link: https://lore.kernel.org/all/20240529033104.33882-1-kerneljasonxing@gmail.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like previous patch does in TCP, we need to adhere to RFC 1213:
"tcpCurrEstab OBJECT-TYPE
...
The number of TCP connections for which the current state
is either ESTABLISHED or CLOSE- WAIT."
So let's consider CLOSE-WAIT sockets.
The logic of counting
When we increment the counter?
a) Only if we change the state to ESTABLISHED.
When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.
Fixes: d9cd27b8cd19 ("mptcp: add CurrEstab MIB counter support")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
According to RFC 1213, we should also take CLOSE-WAIT sockets into
consideration:
"tcpCurrEstab OBJECT-TYPE
...
The number of TCP connections for which the current state
is either ESTABLISHED or CLOSE- WAIT."
After this, CurrEstab counter will display the total number of
ESTABLISHED and CLOSE-WAIT sockets.
The logic of counting
When we increment the counter?
a) if we change the state to ESTABLISHED.
b) if we change the state from SYN-RECEIVED to CLOSE-WAIT.
When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.
Please note: there are two chances that old state of socket can be changed
to CLOSE-WAIT in tcp_fin(). One is SYN-RECV, the other is ESTABLISHED.
So we have to take care of the former case.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Drop the second snapshot of mmu_invalidate_seq in kvm_faultin_pfn().
Before checking the mismatch of private vs. shared, mmu_invalidate_seq is
saved to fault->mmu_seq, which can be used to detect an invalidation
related to the gfn occurred, i.e. KVM will not install a mapping in page
table if fault->mmu_seq != mmu_invalidate_seq.
Currently there is a second snapshot of mmu_invalidate_seq, which may not
be same as the first snapshot in kvm_faultin_pfn(), i.e. the gfn attribute
may be changed between the two snapshots, but the gfn may be mapped in
page table without hindrance. Therefore, drop the second snapshot as it
has no obvious benefits.
Fixes: f6adeae81f35 ("KVM: x86/mmu: Handle no-slot faults at the beginning of kvm_faultin_pfn()")
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20240528102234.2162763-1-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.10, take #1
- Large set of FP/SVE fixes for pKVM, addressing the fallout
from the per-CPU data rework and making sure that the host
is not involved in the FP/SVE switching any more
- Allow FEAT_BTI to be enabled with NV now that FEAT_PAUTH
is copletely supported
- Fix for the respective priorities of Failed PAC, Illegal
Execution state and Instruction Abort exceptions
- Fix the handling of AArch32 instruction traps failing their
condition code, which was broken by the introduction of
ESR_EL2.ISS2
- Allow vpcus running in AArch32 state to be restored in
System mode
- Fix AArch32 GPR restore that would lose the 64 bit state
under some conditions
|
|
The function run_all_insn_set_hw_mode() is registered as startup callback
of 'CPUHP_AP_ARM64_ISNDEP_STARTING', it invokes set_hw_mode() methods of
all emulated instructions.
As the STARTING callbacks are not expected to fail, if one of the
set_hw_mode() fails, e.g. due to el0 mixed-endian is not supported for
'setend', it will report a warning:
```
CPU[2] cannot support the emulation of setend
CPU 2 UP state arm64/isndep:starting (136) failed (-22)
CPU2: Booted secondary processor 0x0000000002 [0x414fd0c1]
```
To fix it, add a check for INSN_UNAVAILABLE status and skip the process.
Signed-off-by: Wei Li <liwei391@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20240423093501.3460764-1-liwei391@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
hsr_redbox.sh test need to create bridge for testing. Add the missing
config CONFIG_BRIDGE in config file.
Fixes: eafbf0574e05 ("test: hsr: Extend the hsr_redbox.sh to have more SAN devices connected")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit f58f45c1e5b9 ("vxlan: drop packets from invalid src-address")
has recently been added to vxlan mainly in the context of source
address snooping/learning so that when it is enabled, an entry in the
FDB is not being created for an invalid address for the corresponding
tunnel endpoint.
Before commit f58f45c1e5b9 vxlan was similarly behaving as geneve in
that it passed through whichever macs were set in the L2 header. It
turns out that this change in behavior breaks setups, for example,
Cilium with netkit in L3 mode for Pods as well as tunnel mode has been
passing before the change in f58f45c1e5b9 for both vxlan and geneve.
After mentioned change it is only passing for geneve as in case of
vxlan packets are dropped due to vxlan_set_mac() returning false as
source and destination macs are zero which for E/W traffic via tunnel
is totally fine.
Fix it by only opting into the is_valid_ether_addr() check in
vxlan_set_mac() when in fact source address snooping/learning is
actually enabled in vxlan. This is done by moving the check into
vxlan_snoop(). With this change, the Cilium connectivity test suite
passes again for both tunnel flavors.
Fixes: f58f45c1e5b9 ("vxlan: drop packets from invalid src-address")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Bauer <mail@david-bauer.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
q->bands will be assigned to qopt->bands to execute subsequent code logic
after kmalloc. So the old q->bands should not be used in kmalloc.
Otherwise, an out-of-bounds write will occur.
Fixes: c2999f7fb05b ("net: sched: multiq: don't call qdisc_put() while holding tree lock")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the XDP_TX path, ionic driver sends a packet to the TX path with rx
page and corresponding dma address.
After tx is done, ionic_tx_clean() frees that page.
But RX ring buffer isn't reset to NULL.
So, it uses a freed page, which causes kernel panic.
BUG: unable to handle page fault for address: ffff8881576c110c
PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060
Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f
Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8
RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283
RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002
RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e
RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8
R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100
FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x254/0x790
? __pfx_page_fault_oops+0x10/0x10
? __pfx_is_prefetch.constprop.0+0x10/0x10
? search_bpf_extables+0x165/0x260
? fixup_exception+0x4a/0x970
? exc_page_fault+0xcb/0xe0
? asm_exc_page_fault+0x22/0x30
? 0xffffffffc0051f64
? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f
? do_raw_spin_unlock+0x54/0x220
ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864]
__napi_poll.constprop.0+0xa0/0x440
net_rx_action+0x7e7/0xc30
? __pfx_net_rx_action+0x10/0x10
Fixes: 8eeed8373e1c ("ionic: Add XDP_TX support")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KSZ8061 needs to write to a MMD register at driver initialization to fix
an errata. This worked in 5.0 kernel but not in newer kernels. The
issue is the main phylib code no longer resets PHY at the very beginning.
Calling phy resuming code later will reset the chip if it is already
powered down at the beginning. This wipes out the MMD register write.
Solution is to implement a phy resume function for KSZ8061 to take care
of this problem.
Fixes: 232ba3a51cc2 ("net: phy: Micrel KSZ8061: link failure after cable connect")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When copying smc settings to clcsock, avoid setting clcsock's sk_sndbuf
to sysctl_tcp_wmem[1], since this may overwrite the value set by
tcp_sndbuf_expand() in TCP connection establishment.
And the other setting sk_{snd|rcv}buf to sysctl value in
smc_adjust_sock_bufsizes() can also be omitted since the initialization
of smc sock and clcsock has set sk_{snd|rcv}buf to smc.sysctl_{w|r}mem
or ipv4_sysctl_tcp_{w|r}mem[1].
Fixes: 30c3c4a4497c ("net/smc: Use correct buffer sizes when switching between TCP and SMC")
Link: https://lore.kernel.org/r/5eaf3858-e7fd-4db8-83e8-3d7a3e0e9ae2@linux.alibaba.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>, too.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PF mcam entries has to be at low priority always so that VF
can install longest prefix match rules at higher priority.
This was taken care currently but when priority allocation
wrt reference entry is requested then entries are allocated
from mid-zone instead of low priority zone. Fix this and
always allocate entries from low priority zone for PFs.
Fixes: 7df5b4b260dd ("octeontx2-af: Allocate low priority entries for PF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The EFI runtime wrappers are a sandbox for calling into EFI runtime
services, which are invoked using indirect calls. When running with kCFI
enabled, the compiler will require the target of any indirect call to be
type annotated.
Given that the EFI runtime services prototypes and calling convention
are governed by the EFI spec, not the Linux kernel, adding such type
annotations for firmware routines is infeasible, and so the compiler
must be informed that prototype validation should be omitted.
Add the __nocfi annotation at the appropriate places in the EFI runtime
wrapper code to achieve this.
Note that this currently only affects 32-bit ARM, given that other
architectures that support both kCFI and EFI use an asm wrapper to call
EFI runtime services, and this hides the indirect call from the
compiler.
Fixes: 1a4fec49efe5 ("ARM: 9392/2: Support CLANG CFI")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
This reverts commit 968595a93669b6b4f6d1fcf80cf2d97956b6868f.
Reported-by: Yuval El-Hanany <YuvalE@radware.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/xdp-newbies/8100DBDC-0B7C-49DB-9995-6027F6E63147@radware.com
Link: https://lore.kernel.org/bpf/20240604122927.29080-3-magnus.karlsson@gmail.com
|
|
This reverts commit 2863d665ea41282379f108e4da6c8a2366ba66db.
This patch introduced a potential kernel crash when multiple napi instances
redirect to the same AF_XDP socket. By removing the queue_index check, it is
possible for multiple napi instances to access the Rx ring at the same time,
which will result in a corrupted ring state which can lead to a crash when
flushing the rings in __xsk_flush(). This can happen when the linked list of
sockets to flush gets corrupted by concurrent accesses. A quick and small fix
is not possible, so let us revert this for now.
Reported-by: Yuval El-Hanany <YuvalE@radware.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/xdp-newbies/8100DBDC-0B7C-49DB-9995-6027F6E63147@radware.com
Link: https://lore.kernel.org/bpf/20240604122927.29080-2-magnus.karlsson@gmail.com
|
|
syzbot reported crash when rawtp program executed through the
test_run interface calls bpf_get_attach_cookie helper or any
other helper that touches task->bpf_ctx pointer.
Setting the run context (task->bpf_ctx pointer) for test_run
callback.
Fixes: 7adfc6c9b315 ("bpf: Add bpf_get_attach_cookie() BPF helper to access bpf_cookie value")
Reported-by: syzbot+3ab78ff125b7979e45f9@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://syzkaller.appspot.com/bug?extid=3ab78ff125b7979e45f9
Link: https://lore.kernel.org/bpf/20240604150024.359247-1-jolsa@kernel.org
|
|
New CPU #defines encode vendor and family as well as model.
Link: https://lore.kernel.org/all/20240520224620.9480-4-tony.luck@intel.com/
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm_tis_core_init() may fail before tpm_tis_probe_irq_single() is
called, in which case tpm_tis_remove() unconditionally calling
flush_work() is triggering a warning for .func still being NULL.
Cc: stable@vger.kernel.org # v6.5+
Fixes: 481c2d14627d ("tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix regression in 'interrupt-map' handling affecting Apple M1 mini
(at least)
- Fix binding example warning in stm32 st,mlahb binding
- Fix schema error in Allwinner platform binding causing lots of
spurious warnings
- Add missing MODULE_DESCRIPTION() to DT kunit tests
* tag 'devicetree-fixes-for-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: property: Fix fw_devlink handling of interrupt-map
of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()
dt-bindings: arm: stm32: st,mlahb: Drop spurious "reg" property from example
dt-bindings: arm: sunxi: Fix incorrect '-' usage
of: of_test: add MODULE_DESCRIPTION()
|
|
To get the changes in:
0ce85db6c2141b7f ("arm64: cputype: Add Neoverse-V3 definitions")
02a0a04676fa7796 ("arm64: cputype: Add Cortex-X4 definitions")
f4d9d9dcc70b96b5 ("arm64: Add Neoverse-V2 part")
That makes this perf source code to be rebuilt:
CC /tmp/build/perf-tools/util/arm-spe.o
The changes in the above patch add MIDR_NEOVERSE_V[23] and
MIDR_NEOVERSE_V1 is used in arm-spe.c, so probably we need to add those
and perhaps MIDR_CORTEX_X4 to that array? Or maybe we need to leave this
for later when this is all tested on those machines?
static const struct midr_range neoverse_spe[] = {
MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1),
MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1),
{},
};
Mark Rutland recommended about arm-spe.c:
"I would not touch this for now -- someone would have to go audit the
TRMs to check that those other cores have the same encoding, and I think
it'd be better to do that as a follow-up."
That addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Besar Wicaksono <bwicaksono@nvidia.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/Zl8cYk0Tai2fs7aM@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We have simple-card / audio-graph / audio-graph2, basically these supports
same feature but is using different DT style.
Because we are using 3 drivers, some feature was added to one driver,
but other drivers doesn't have it. This patch set try to sync it on these
3 drivers.
|
|
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
On i.MX95 wakeup domain, there is one instance of Audio XCVR
supporting SPDIF mode with a connection to the Audio XCVR physical
interface.
|
|
Merge series from linux@treblig.org:
Clean out a bunch of old structs in sound/soc/codecs.
Build tested only.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings in several tests and fixes to ftrace tests"
* tag 'linux_kselftest-fixes-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/futex: don't pass a const char* to asprintf(3)
selftests/futex: don't redefine .PHONY targets (all, clean)
selftests/tracing: Fix event filter test to retry up to 10 times
selftests/futex: pass _GNU_SOURCE without a value to the compiler
selftests/overlayfs: Fix build error on ppc64
selftests/openat2: Fix build warnings on ppc64
selftests: cachestat: Fix build warnings on ppc64
tracing/selftests: Fix kprobe event name test for .isra. functions
selftests/ftrace: Update required config
selftests/ftrace: Fix to check required event file
kselftest/alsa: Ensure _GNU_SOURCE is defined
|
|
|
|
While the experiment did reveal that there are additional places that are
missing the lock during secondary bus reset, one of the places that needs
to take cfg_access_lock (pci_bus_lock()) is not prepared for lockdep
annotation.
Specifically, pci_bus_lock() takes pci_dev_lock() recursively and is
currently dependent on the fact that the device_lock() is marked
lockdep_set_novalidate_class(&dev->mutex). Otherwise, without that
annotation, pci_bus_lock() would need to use something like a new
pci_dev_lock_nested() helper, a scheme to track a PCI device's depth in the
topology, and a hope that the depth of a PCI tree never exceeds the max
value for a lockdep subclass.
The alternative to ripping out the lockdep coverage would be to deploy a
dynamic lock key for every PCI device. Unfortunately, there is evidence
that increasing the number of keys that lockdep needs to track to be
per-PCI-device is prohibitively expensive for something like the
cfg_access_lock.
The main motivation for adding the annotation in the first place was to
catch unlocked secondary bus resets, not necessarily catch lock ordering
problems between cfg_access_lock and other locks. Solve that narrower
problem with follow-on patches, and just due to targeted revert for now.
Link: https://lore.kernel.org/r/171711746402.1628941.14575335981264103013.stgit@dwillia2-xfh.jf.intel.com
Fixes: 7e89efc6e9e4 ("PCI: Lock upstream bridge for pci_reset_function()")
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_134186v1/shard-dg2-1/igt@device_reset@unbind-reset-rebind.html
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
|
|
The LMTT must be updated whenever we change the VF LMEM configuration.
We missed that step when freeing the whole VF GT config, which could
result in stale PTE in LMTT or LMTT PT object leaks. Fix that.
Fixes: ac6598aed1b3 ("drm/xe/pf: Add support to configure SR-IOV VFs")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527115408.1064-1-michal.wajdeczko@intel.com
(cherry picked from commit c063cce7df3a765539e2a2d75ab943f334446cce)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hid/hid-logitech-hidpp.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The newly added file causes a ton of sparse warnings about the
incorrect use of __le32 and similar types:
drivers/hid/intel-ish-hid/ishtp/loader.h:41:23: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:42:27: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:43:24: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:44:24: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.h:45:22: error: invalid bitfield specifier for type restricted __le32.
drivers/hid/intel-ish-hid/ishtp/loader.c:172:33: warning: restricted __le32 degrades to integer
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: warning: incorrect type in assignment (different base types)
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: expected restricted __le32 [usertype] length
drivers/hid/intel-ish-hid/ishtp/loader.c:178:50: got unsigned long
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: warning: incorrect type in assignment (different base types)
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: expected restricted __le32 [usertype] fw_off
drivers/hid/intel-ish-hid/ishtp/loader.c:179:50: got unsigned int [usertype] offset
drivers/hid/intel-ish-hid/ishtp/loader.c:180:17: warning: cast from restricted __le32
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: warning: invalid assignment: +=
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: left side has type unsigned int
drivers/hid/intel-ish-hid/ishtp/loader.c:183:24: right side has type restricted __le32
Add the necessary conversions and use temporary variables where appropriate
to avoid converting back.
Fixes: 579a267e4617 ("HID: intel-ish-hid: Implement loading firmware from host feature")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhang Lixu <lixu.zhang@intel.com>
Tested-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
joycon_leds_create() has a ida_alloc() call. So if an error occurs after
it, a corresponding ida_free() call is needed, as already done in the
.remove function.
This is not 100% perfect, because if ida_alloc() fails, then
'ctlr->player_id' will forced to be U32_MAX, and an error will be logged
when ida_free() is called.
Considering that this can't happen in real life, no special handling is
done to handle it.
Fixes: 5307de63d71d ("HID: nintendo: use ida for LED player id")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Fix a memory leak on logi_dj_recv_send_report() error path.
Fixes: 6f20d3261265 ("HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
KVM (and pKVM) do not support SME guests. Therefore KVM ensures
that the host's SME state is flushed and that SME controls for
enabling access to ZA storage and for streaming are disabled.
pKVM needs to protect against a buggy/malicious host. Ensure that
it wouldn't run a guest when protected mode is enabled should any
of the SME controls be enabled.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-10-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When setting/clearing CPACR bits for EL0 and EL1, use the ELx
format of the bits, which covers both. This makes the code
clearer, and reduces the chances of accidentally missing a bit.
No functional change intended.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-9-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that we have introduced finalize_init_hyp_mode(), lets
consolidate the initializing of the host_data fpsimd_state and
sve state.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240603122852.3923848-8-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When running in protected mode we don't want to leak protected
guest state to the host, including whether a guest has used
fpsimd/sve. Therefore, eagerly restore the host state on guest
exit when running in protected mode, which happens only if the
guest has used fpsimd/sve.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-7-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Protected mode needs to maintain (save/restore) the host's sve
state, rather than relying on the host kernel to do that. This is
to avoid leaking information to the host about guests and the
type of operations they are performing.
As a first step towards that, allocate memory mapped at hyp, per
cpu, for the host sve state. The following patch will use this
memory to save/restore the host state.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-6-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In subsequent patches, n/vhe will diverge on saving the host
fpsimd/sve state when taking a guest fpsimd/sve trap. Add a
specialized helper to handle it.
No functional change intended.
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-5-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The same traps controlled by CPTR_EL2 or CPACR_EL1 need to be
toggled in different parts of the code, but the exact bits and
their polarity differ between these two formats and the mode
(vhe/nvhe/hvhe).
To reduce the amount of duplicated code and the chance of getting
the wrong bit/polarity or missing a field, abstract the set/clear
of CPTR_EL2 bits behind a helper.
Since (h)VHE is the way of the future, use the CPACR_EL1 format,
which is a subset of the VHE CPTR_EL2, as a reference.
No functional change intended.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-4-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since the prototypes for __sve_save_state/__sve_restore_state at
hyp were added, the underlying macro has acquired a third
parameter for saving/restoring ffr.
Fix the prototypes to account for the third parameter, and
restore the ffr for the guest since it is saved.
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240603122852.3923848-3-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that the hypervisor is handling the host sve state in
protected mode, it needs to be able to save it.
This reverts commit e66425fc9ba3 ("KVM: arm64: Remove unused
__sve_save_state").
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20240603122852.3923848-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The io_register_iowq_max_workers() function calls io_put_sq_data(),
which acquires the sqd->lock without releasing the uring_lock.
Similar to the commit 009ad9f0c6ee ("io_uring: drop ctx->uring_lock
before acquiring sqd->lock"), this can lead to a potential deadlock
situation.
To resolve this issue, the uring_lock is released before calling
io_put_sq_data(), and then it is re-acquired after the function call.
This change ensures that the locks are acquired in the correct
order, preventing the possibility of a deadlock.
Suggested-by: Maximilian Heyne <mheyne@amazon.de>
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Link: https://lore.kernel.org/r/20240604130527.3597-1-hagarhem@amazon.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Clang static checker (scan-build) warning:
o_uring/io-wq.c:line 1051, column 3
The expression is an uninitialized value. The computed value will
also be garbage.
'match.nr_pending' is used in io_acct_cancel_pending_work(), but it is
not fully initialized. Change the order of assignment for 'match' to fix
this problem.
Fixes: 42abc95f05bf ("io-wq: decouple work_list protection from the big wqe->lock")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20240604121242.2661244-1-suhui@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Not quite sure what __io_napi_adjust_timeout() was attemping to do, it's
adjusting both the NAPI timeout and the general overall timeout, and
calculating a value that is never used. The overall timeout is a super
set of the NAPI timeout, and doesn't need adjusting. The only thing we
really need to care about is that the NAPI timeout doesn't exceed the
overall timeout. If a user asked for a timeout of eg 5 usec and NAPI
timeout is 10 usec, then we should not spin for 10 usec.
While in there, sanitize the time checking a bit. If we have a negative
value in the passed in timeout, discard it. Round up the value as well,
so we don't end up with a NAPI timeout for the majority of the wait,
with only a tiny sleep value at the end.
Hence the only case we need to care about is if the NAPI timeout is
larger than the overall timeout. If it is, cap the NAPI timeout at what
the overall timeout is.
Cc: stable@vger.kernel.org
Fixes: 8d0c12a80cde ("io-uring: add napi busy poll support")
Reported-by: Lewis Baker <lewissbaker@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With commit c4cb23111103 ("iommu/amd: Add support for enable/disable IOPF")
we are hitting below issue. This happens because in IOPF enablement path
it holds spin lock with irq disable and then tries to take mutex lock.
dmesg:
-----
[ 0.938739] =============================
[ 0.938740] [ BUG: Invalid wait context ]
[ 0.938742] 6.10.0-rc1+ #1 Not tainted
[ 0.938745] -----------------------------
[ 0.938746] swapper/0/1 is trying to lock:
[ 0.938748] ffffffff8c9f01d8 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x78/0x4a0
[ 0.938767] other info that might help us debug this:
[ 0.938768] context-{5:5}
[ 0.938769] 7 locks held by swapper/0/1:
[ 0.938772] #0: ffff888101a91310 (&group->mutex){+.+.}-{4:4}, at: bus_iommu_probe+0x70/0x160
[ 0.938790] #1: ffff888101d1f1b8 (&domain->lock){....}-{3:3}, at: amd_iommu_attach_device+0xa5/0x700
[ 0.938799] #2: ffff888101cc3d18 (&dev_data->lock){....}-{3:3}, at: amd_iommu_attach_device+0xc5/0x700
[ 0.938806] #3: ffff888100052830 (&iommu->lock){....}-{2:2}, at: amd_iommu_iopf_add_device+0x3f/0xa0
[ 0.938813] #4: ffffffff8945a340 (console_lock){+.+.}-{0:0}, at: _printk+0x48/0x50
[ 0.938822] #5: ffffffff8945a390 (console_srcu){....}-{0:0}, at: console_flush_all+0x58/0x4e0
[ 0.938867] #6: ffffffff82459f80 (console_owner){....}-{0:0}, at: console_flush_all+0x1f0/0x4e0
[ 0.938872] stack backtrace:
[ 0.938874] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc1+ #1
[ 0.938877] Hardware name: HP HP EliteBook 745 G3/807E, BIOS N73 Ver. 01.39 04/16/2019
Fix above issue by re-arranging code in attach device path:
- move device PASID/IOPF enablement outside lock in AMD IOMMU driver.
This is safe as core layer holds group->mutex lock before calling
iommu_ops->attach_dev.
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Fixes: c4cb23111103 ("iommu/amd: Add support for enable/disable IOPF")
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240530084801.10758-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Check for EFR[EPHSup] bit before enabling PPR. This bit must be set
to enable PPR.
Reported-by: Borislav Petkov <bp@alien8.de>
Fixes: c4cb23111103 ("iommu/amd: Add support for enable/disable IOPF")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218900
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Jean-Christophe Guillain <jean-christophe@guillain.net>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240530071118.10297-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Workqueue name length is crossing WQ_NAME_LEN limit. Fix it by changing
name format. New format : "iopf_queue/amdvi-<iommu-devid>"
kernel warning:
[ 11.146912] workqueue: name exceeds WQ_NAME_LEN. Truncating to: iopf_queue/amdiommu-0xc002-iopf
Reported-by: Borislav Petkov <bp@alien8.de>
Fixes: 61928bab9d26 ("iommu/amd: Define per-IOMMU iopf_queue")
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240529113900.5798-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Fix the description for the ti,dmdin-gpio1 and ti,dmclk-gpio2
properties to correctly describe that when configured as general
purpose outputs (ADC3XXX_GPIO_GPO), the pins are available via
the GPIO framework.
Signed-off-by: Ricard Wanderlof <ricard.wanderlof@axis.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://msgid.link/r/20240528-tlv320adc3xxx-dt-gpio-fix-v1-1-209fb2c2f86f@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
iommu_sva_bind_device() should return either a sva bond handle or an
ERR_PTR value in error cases. Existing drivers (idxd and uacce) only
check the return value with IS_ERR(). This could potentially lead to
a kernel NULL pointer dereference issue if the function returns NULL
instead of an error pointer.
In reality, this doesn't cause any problems because iommu_sva_bind_device()
only returns NULL when the kernel is not configured with CONFIG_IOMMU_SVA.
In this case, iommu_dev_enable_feature(dev, IOMMU_DEV_FEAT_SVA) will
return an error, and the device drivers won't call iommu_sva_bind_device()
at all.
Fixes: 26b25a2b98e4 ("iommu: Bind process address spaces to devices")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240528042528.71396-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
