summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-12-01RDMA/hns: Get rid of page operation after dma_alloc_coherentWei Hu\(Xavier\)
In general, dma_alloc_coherent() returns a CPU virtual address and a DMA address, and we have no guarantee that the underlying memory even has an associated struct page at all. This patch gets rid of the page operation after dma_alloc_coherent, and records the VA returned form dma_alloc_coherent in the struct of hem in hns RoCE driver. Fixes: 9a44353("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01RDMA/hns: Get rid of virt_to_page and vmap calls after dma_alloc_coherentWei Hu\(Xavier\)
In general dma_alloc_coherent() returns a CPU virtual address and a DMA address, and we have no guarantee that the virtual address is either in the linear map or vmalloc. It could be in some other special place. We have no guarantee that the underlying memory even has an associated struct page at all. In current code, there are incorrect usage as below: dma_alloc_coherent + virt_to_page + vmap. There will probably introduce coherency problem. This patch fixes it to get rid of virt_to_page and vmap calls at Leon's suggestion. The related link: https://lkml.org/lkml/2017/11/7/34 Fixes: 9a44353("IB/hns: Add driver files for hns RoCE driver") Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01RDMA/hns: Fix the issue of IOVA not page continuous in hip08Wei Hu\(Xavier\)
If the smmu is enabled, the length of sg obtained from __iommu_map_sg_attrs is not 4kB. When the IOVA is set with the sg dma address, the IOVA will not be page continuous. so, the current code has MTPT configuration error that probably cause dma operation failure. In order to fix this issue, the IOVA should be calculated based on the sg length. Fixes: 3958cc5("RDMA/hns: Configure the MTPT in hip08") Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Shaobo Xu <xushaobo2@huawei.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Xiping Zhang (Francis) <zhangxiping3@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01IB/core: Init subsys if compiled to vmlinuz-coreDmitry Monakhov
Once infiniband is compiled as a core component its subsystem must be enabled before device initialization. Otherwise there is a NULL pointer dereference during mlx4_core init, calltrace: ->device_add if (dev->class) { deref dev->class->p =>NULLPTR #Config CONFIG_NET_DEVLINK=y CONFIG_MAY_USE_DEVLINK=y CONFIG_MLX4_EN=y Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01RDMA/cma: Make sure that PSN is not over max allowedMoni Shoua
This patch limits the initial value for PSN to 24 bits as spec requires. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01i40iw: Notify user of established connection after QP in RTSHenry Orosco
Established CM event is sent prior to modifying QP to RTS state. This can result in application closing the connection before the QP is actually in RTS state. Move sending of established CM event to after modify QP to RTS. Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01i40iw: Move MPA request event for loopback after connectTatyana Nikolova
For loopback, a MPA request event is generated when cm_node is initialized, which allows applications to act on the connect request before i40iw_connect() has completed. In some cases, the reject flow executes in parallel with the connect flow and doesn't delete an APBVT entry, because the apbvt_set variable is still not set by the connect flow. Move the MPA request event to the end of i40iw_connect() to notify application for a connect request, after connect has completed. Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01i40iw: Correct ARP index maskMustafa Ismail
The ARP table entry indexes are aliased to 12bits instead of the intended 16bits when uploaded to the QP Context. This will present an issue when the number of connections exceeds 4096 as ARP entries are reused. Fix this by adjusting the mask to account for the full 16bits. Fixes: 4e9042e647ff ("i40iw: add hw and utils files") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01i40iw: Do not free sqbuf when event is I40IW_TIMER_TYPE_CLOSEMustafa Ismail
When the event type is I40IW_TIMER_TYPE_CLOSE, there is no sqbuf and it should not be freed as one in i40iw_schedule_cm_timer(). Fixes: f27b4746f378 ("i40iw: add connection management code") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01i40iw: Allocate a sdbuf per CQP WQEChien Tin Tung
Currently there is only one sdbuf per Control QP (CQP) for programming Segment Descriptor (SD). If multiple SD work requests are posted simultaneously, the sdbuf is reused by all WQEs and new WQEs can corrupt previous WQEs sdbuf leading to incorrect SD programming. Fix this by allocating one sdbuf per CQP SQ WQE. When an SD command is posted, it will use the corresponding sdbuf for the WQE. Fixes: 86dbcd0f12e9 ("i40iw: add file to handle cqp calls") Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-01usb: xhci: fix panic in xhci_free_virt_devices_depth_firstYu Chen
Check vdev->real_port 0 to avoid panic [ 9.261347] [<ffffff800884a390>] xhci_free_virt_devices_depth_first+0x58/0x108 [ 9.261352] [<ffffff800884a814>] xhci_mem_cleanup+0x1bc/0x570 [ 9.261355] [<ffffff8008842de8>] xhci_stop+0x140/0x1c8 [ 9.261365] [<ffffff80087ed304>] usb_remove_hcd+0xfc/0x1d0 [ 9.261369] [<ffffff80088551c4>] xhci_plat_remove+0x6c/0xa8 [ 9.261377] [<ffffff80086e928c>] platform_drv_remove+0x2c/0x70 [ 9.261384] [<ffffff80086e6ea0>] __device_release_driver+0x80/0x108 [ 9.261387] [<ffffff80086e7a1c>] device_release_driver+0x2c/0x40 [ 9.261392] [<ffffff80086e5f28>] bus_remove_device+0xe0/0x120 [ 9.261396] [<ffffff80086e2e34>] device_del+0x114/0x210 [ 9.261399] [<ffffff80086e9e00>] platform_device_del+0x30/0xa0 [ 9.261403] [<ffffff8008810bdc>] dwc3_otg_work+0x204/0x488 [ 9.261407] [<ffffff80088133fc>] event_work+0x304/0x5b8 [ 9.261414] [<ffffff80080e31b0>] process_one_work+0x148/0x490 [ 9.261417] [<ffffff80080e3548>] worker_thread+0x50/0x4a0 [ 9.261421] [<ffffff80080e9ea0>] kthread+0xe8/0x100 [ 9.261427] [<ffffff8008083680>] ret_from_fork+0x10/0x50 The problem can occur if xhci_plat_remove() is called shortly after xhci_plat_probe(). While xhci_free_virt_devices_depth_first been called before the device has been setup and get real_port initialized. The problem occurred on Hikey960 and was reproduced by Guenter Roeck on Kevin with chromeos-4.4. Fixes: ee8665e28e8d ("xhci: free xhci virtual devices with leaf nodes first") Cc: Guenter Roeck <groeck@google.com> Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Guenter Roeck <groeck@chromium.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fan Ning <fanning4@hisilicon.com> Signed-off-by: Li Rui <lirui39@hisilicon.com> Signed-off-by: yangdi <yangdi10@hisilicon.com> Signed-off-by: Yu Chen <chenyu56@huawei.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-01xhci: Don't show incorrect WARN message about events for empty ringsMathias Nyman
xHC can generate two events for a short transfer if the short TRB and last TRB in the TD are not the same TRB. The driver will handle the TD after the first short event, and remove it from its internal list. Driver then incorrectly prints a warning for the second event: "WARN Event TRB for slot x ep y with no TDs queued" Fix this by not printing a warning if we get a event on a empty list if the previous event was a short event. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-01virtio_balloon: fix increment of vb->num_pfns in fill_balloon()Jan Stancek
commit c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM") changed code to increment vb->num_pfns before call to set_page_pfns(), which used to happen only after. This patch fixes boot hang for me on ppc64le KVM guests. Fixes: c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM") Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-01virtio: release virtio index when fail to device_registerweiping zhang
index can be reused by other virtio device. Cc: stable@vger.kernel.org Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-01fw_cfg: fix driver removeMarc-André Lureau
On driver remove(), all objects created during probe() should be removed, but sysfs qemu_fw_cfg/rev file was left. Also reorder functions to match probe() error cleanup code. Cc: stable@vger.kernel.org Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-01Merge tag 'powerpc-4.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two fixes for nasty kexec/kdump crashes in certain configurations. A couple of minor fixes for the new TIDR code. A fix for an oops in a CXL error handling path. Thanks to: Andrew Donnellan, Christophe Lombard, David Gibson, Mahesh Salgaonkar, Vaibhav Jain" * tag 'powerpc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Do not assign thread.tidr if already assigned powerpc: Avoid signed to unsigned conversion in set_thread_tidr() powerpc/kexec: Fix kexec/kdump in P9 guest kernels powerpc/powernv: Fix kexec crashes caused by tlbie tracing cxl: Check if vphb exists before iterating over AFU devices
2017-12-01Merge tag 'afs-fixes-20171201' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS fixes from David Howells: "Two fix patches for the AFS filesystem: - Fix the refcounting on permit caching. - AFS inode (afs_vnode) fields need resetting after allocation because they're only initialised when slab pages are obtained from the page allocator" * tag 'afs-fixes-20171201' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Properly reset afs_vnode (inode) fields afs: Fix permit refcounting
2017-12-01Merge tag 'mmc-v4.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Ensure that debugfs files are removed properly - Fix missing blk_put_request() - Deal with errors from blk_get_request() - Rewind mmc bus suspend operations at failures - Prepend '0x' to ocr and pre_eol_info in sysfs to identify as hex MMC host: - sdhci-msm: Make it optional to wait for signal level changes - sdhci: Avoid swiotlb buffer being full" * tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: prepend 0x to OCR entry in sysfs mmc: core: prepend 0x to pre_eol_info entry in sysfs mmc: sdhci: Avoid swiotlb buffer being full mmc: sdhci-msm: Optionally wait for signal level changes mmc: block: Ensure that debugfs files are removed mmc: core: Do not leave the block driver in a suspended state mmc: block: Check return value of blk_get_request() mmc: block: Fix missing blk_put_request()
2017-12-01Merge tag 'drm-fixes-for-v4.15-rc2' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes and cleanups from Dave Airlie: "The main thing are a bunch of fixes for the new amd display code, a bunch of smatch fixes. core: - Atomic helper regression fix. - Deferred fbdev fallout regression fix. amdgpu: - New display code (dc) dpms, suspend/resume and smatch fixes, along with some others - Some regression fixes for amdkfd/radeon. - Fix a ttm regression for swiotlb disabled bridge: - A bunch of fixes for the tc358767 bridge mali-dp + hdlcd: - some fixes and internal API catchups. imx-drm: -regression fix in atomic code. omapdrm: - platform detection regression fixes" * tag 'drm-fixes-for-v4.15-rc2' of git://people.freedesktop.org/~airlied/linux: (76 commits) drm/imx: always call wait_for_flip_done in commit_tail omapdrm: hdmi4_cec: signedness bug in hdmi4_cec_init() drm: omapdrm: Fix DPI on platforms using the DSI VDDS omapdrm: hdmi4: Correct the SoC revision matching drm/omap: displays: panel-dpi: add backlight dependency drm/omap: Fix error handling path in 'omap_dmm_probe()' drm/i915: Disable THP until we have a GPU read BW W/A drm/bridge: tc358767: fix 1-lane behavior drm/bridge: tc358767: fix AUXDATAn registers access drm/bridge: tc358767: fix timing calculations drm/bridge: tc358767: fix DP0_MISC register set drm/bridge: tc358767: filter out too high modes drm/bridge: tc358767: do no fail on hi-res displays drm/bridge: Fix lvds-encoder since the panel_bridge rework. drm/bridge: synopsys/dw-hdmi: Enable cec clock drm/bridge: adv7511/33: Fix adv7511_cec_init() failure handling drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd drm/ttm: fix populate_and_map() functions once more drm/fb_helper: Disable all crtc's when initial setup fails. drm/atomic: make drm_atomic_helper_wait_for_vblanks more agressive ...
2017-12-01Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A selection of fixes/changes that should make it into this series. This contains: - NVMe, two merges, containing: - pci-e, rdma, and fc fixes - Device quirks - Fix for a badblocks leak in null_blk - bcache fix from Rui Hua for a race condition regression where -EINTR was returned to upper layers that didn't expect it. - Regression fix for blktrace for a bug introduced in this series. - blktrace cleanup for cgroup id. - bdi registration error handling. - Small series with cleanups for blk-wbt. - Various little fixes for typos and the like. Nothing earth shattering, most important are the NVMe and bcache fixes" * 'for-linus' of git://git.kernel.dk/linux-block: (34 commits) nvme-pci: fix NULL pointer dereference in nvme_free_host_mem() nvme-rdma: fix memory leak during queue allocation blktrace: fix trace mutex deadlock nvme-rdma: Use mr pool nvme-rdma: Check remotely invalidated rkey matches our expected rkey nvme-rdma: wait for local invalidation before completing a request nvme-rdma: don't complete requests before a send work request has completed nvme-rdma: don't suppress send completions bcache: check return value of register_shrinker bcache: recover data from backing when data is clean bcache: Fix building error on MIPS bcache: add a comment in journal bucket reading nvme-fc: don't use bit masks for set/test_bit() numbers blk-wbt: fix comments typo blk-wbt: move wbt_clear_stat to common place in wbt_done blk-sysfs: remove NULL pointer checking in queue_wb_lat_store blk-wbt: remove duplicated setting in wbt_init nvme-pci: add quirk for delay before CHK RDY for WDC SN200 block: remove useless assignment in bio_split null_blk: fix dev->badblocks leak ...
2017-12-01arm64: context: Fix comments and remove pointless smp_wmb()Will Deacon
The comments in the ASID allocator incorrectly hint at an MP-style idiom using the asid_generation and the active_asids array. In fact, the synchronisation is achieved using a combination of an xchg operation and a spinlock, so update the comments and remove the pointless smp_wmb(). Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01arm64: cpu_ops: Add missing 'const' qualifiersYury Norov
Building the kernel with an LTO-enabled GCC spits out the following "const" warning for the cpu_ops code: mm/percpu.c:2168:20: error: pcpu_fc_names causes a section type conflict with dt_supported_cpu_ops const char * const pcpu_fc_names[PCPU_FC_NR] __initconst = { ^ arch/arm64/kernel/cpu_ops.c:34:37: note: ‘dt_supported_cpu_ops’ was declared here static const struct cpu_operations *dt_supported_cpu_ops[] __initconst = { Fix it by adding missed const qualifiers. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01arm64: perf: remove unsupported events for Cortex-A73Xu YiPing
bus access read/write events are not supported in A73, based on the Cortex-A73 TRM r0p2, section 11.9 Events (pages 11-457 to 11-460). Fixes: 5561b6c5e981 "arm64: perf: add support for Cortex-A73" Acked-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Xu YiPing <xuyiping@hisilicon.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01arm64: fpsimd: Fix failure to restore FPSIMD state after signalsDave Martin
The fpsimd_update_current_state() function is responsible for loading the FPSIMD state from the user signal frame into the current task during sigreturn. When implementing support for SVE, conditional code was added to this function in order to handle the case where SVE state need to be loaded for the task and merged with the FPSIMD data from the signal frame; however, the FPSIMD-only case was unintentionally dropped. As a result of this, sigreturn does not currently restore the FPSIMD state of the task, except in the case where the system supports SVE and the signal frame contains SVE state in addition to FPSIMD state. This patch fixes this bug by making the copy-in of the FPSIMD data from the signal frame to thread_struct unconditional. This remains a performance regression from v4.14, since the FPSIMD state is now copied into thread_struct and then loaded back, instead of _only_ being loaded into the CPU FPSIMD registers. However, it is essential to call task_fpsimd_load() here anyway in order to ensure that the SVE enable bit in CPACR_EL1 is set correctly before returning to userspace. This could use some refactoring, but since sigreturn is not a fast path I have kept this patch as a pure fix and left the refactoring for later. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: 8cd969d28fd2 ("arm64/sve: Signal handling support") Reported-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01arm64: pgd: Mark pgd_cache as __ro_after_initJinbum Park
pgd_cache is setup once while init stage and never changed after that, so it is good candidate for __ro_after_init Signed-off-by: Jinbum Park <jinb.park7@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01arm64: ftrace: emit ftrace-mod.o contents through codeArd Biesheuvel
When building the arm64 kernel with both CONFIG_ARM64_MODULE_PLTS and CONFIG_DYNAMIC_FTRACE enabled, the ftrace-mod.o object file is built with the kernel and contains a trampoline that is linked into each module, so that modules can be loaded far away from the kernel and still reach the ftrace entry point in the core kernel with an ordinary relative branch, as is emitted by the compiler instrumentation code dynamic ftrace relies on. In order to be able to build out of tree modules, this object file needs to be included into the linux-headers or linux-devel packages, which is undesirable, as it makes arm64 a special case (although a precedent does exist for 32-bit PPC). Given that the trampoline essentially consists of a PLT entry, let's not bother with a source or object file for it, and simply patch it in whenever the trampoline is being populated, using the existing PLT support routines. Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01arm64: module-plts: factor out PLT generation code for ftraceArd Biesheuvel
To allow the ftrace trampoline code to reuse the PLT entry routines, factor it out and move it into asm/module.h. Cc: <stable@vger.kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-01afs: Properly reset afs_vnode (inode) fieldsDavid Howells
When an AFS inode is allocated by afs_alloc_inode(), the allocated afs_vnode struct isn't necessarily reset from the last time it was used as an inode because the slab constructor is only invoked once when the memory is obtained from the page allocator. This means that information can leak from one inode to the next because we're not calling kmem_cache_zalloc(). Some of the information isn't reset, in particular the permit cache pointer. Bring the clearances up to date. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marc Dionne <marc.dionne@auristor.com>
2017-12-01afs: Fix permit refcountingDavid Howells
Fix four refcount bugs in afs_cache_permit(): (1) When checking the result of the kzalloc(), we can't just return, but must put 'permits'. (2) We shouldn't put permits immediately after hashing a new permit as we need to keep the pointer stable so that we can check to see if vnode->permit_cache has changed before we decide whether to assign to it. (3) 'permits' is being put twice. (4) We need to put either the replacement or the thing replaced after the assignment to vnode->permit_cache. Without this, lots of the following are seen: Kernel BUG at ffffffffa039857b [verbose debug info unavailable] ------------[ cut here ]------------ Kernel BUG at ffffffffa039858a [verbose debug info unavailable] ------------[ cut here ]------------ The addresses are in the .text..refcount section of the kafs.ko module. Following the relocation records for the __ex_table section shows one to be due to the decrement in afs_put_permits() and the other to be key_get() in afs_cache_permit(). Occasionally, the following is seen: refcount_t overflow at afs_cache_permit+0x57d/0x5c0 [kafs] in cc1[562], uid/euid: 0/0 WARNING: CPU: 0 PID: 562 at kernel/panic.c:657 refcount_error_report+0x9c/0xac ... Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marc Dionne <marc.dionne@auristor.com>
2017-12-01can: mcba_usb: fix device disconnect bugMartin Kelly
Currently, when you disconnect the device, the driver infinitely resubmits all URBs, so you see: Rx URB aborted (-32) in an infinite loop. Fix this by catching -EPIPE (what we get in urb->status when the device disconnects) and not resubmitting. With this patch, I can plug and unplug many times and the driver recovers correctly. Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-01can: mcba_usb: fix typoMartin Kelly
Fix typo "analizer" --> "Analyzer". Signed-off-by: Martin Kelly <mkelly@xevo.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-01can: flexcan: fix VF610 state transition issueMarc Kleine-Budde
Enable FLEXCAN_QUIRK_BROKEN_PERR_STATE for VF610 to report correct state transitions. Tested-by: Mirza Krak <mirza.krak@gmail.com> Cc: linux-stable <stable@vger.kernel.org> # >= v4.11 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-01can: flexcan: Update IRQ Err Passive informationMarc Kleine-Budde
The flexcan IP cores used on MX25 and MX35 do not generate Error Passive IRQs. Update the IP core overview table in the driver accordingly. Suggested-by: ZHU Yi (ST-FIR/ENG1-Zhu) <Yi.Zhu5@cn.bosch.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-01can: peak/pci: fix potential bug when probe() failsStephane Grosjean
PCI/PCIe drivers for PEAK-System CAN/CAN-FD interfaces do some access to the PCI config during probing. In case one of these accesses fails, a POSITIVE PCIBIOS_xxx error code is returned back. This POSITIVE error code MUST be converted into a NEGATIVE errno for the probe() function to indicate it failed. Using the pcibios_err_to_errno() function, we make sure that the return code will always be negative. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-01can: ti_hecc: Fix napi poll return value for repollOliver Stäbler
After commit d75b1ade567f ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. So we need to return budget if there are still packets to receive. Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-01can: kvaser_usb: ratelimit errors if incomplete messages are receivedJimmy Assarsson
Avoid flooding the kernel log with "Formate error", if incomplete message are received. Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-01can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()Jimmy Assarsson
The conditon in the while-loop becomes true when actual_length is less than 2 (MSG_HEADER_LEN). In best case we end up with a former, already dispatched msg, that got msg->len greater than actual_length. This will result in a "Format error" error printout. Problem seen when unplugging a Kvaser USB device connected to a vbox guest. warning: comparison between signed and unsigned integer expressions [-Wsign-compare] Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-01can: kvaser_usb: free buf in error pathsJimmy Assarsson
The allocated buffer was not freed if usb_submit_urb() failed. Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-12-01KVM: arm/arm64: kvm_arch_destroy_vm cleanupsAndrew Jones
kvm_vgic_vcpu_destroy already gets called from kvm_vgic_destroy for each vcpu, so we don't have to call it from kvm_arch_vcpu_free. Additionally the other architectures set kvm->online_vcpus to zero after freeing them. We might as well do that for ARM too. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-12-01KVM: arm/arm64: Fix spinlock acquisition in vgic_set_ownerMarc Zyngier
vgic_set_owner acquires the irq lock without disabling interrupts, resulting in a lockdep splat (an interrupt could fire and result in the same lock being taken if the same virtual irq is to be injected). In practice, it is almost impossible to trigger this bug, but better safe than sorry. Convert the lock acquisition to a spin_lock_irqsave() and keep lockdep happy. Reported-by: James Morse <james.morse@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2017-12-01samples/bpf: add error checking for perf ioctl calls in bpf loaderYonghong Song
load_bpf_file() should fail if ioctl with command PERF_EVENT_IOC_ENABLE and PERF_EVENT_IOC_SET_BPF fails. When they do fail, proper error messages are printed. With this change, the below "syscall_tp" run shows that the maximum number of bpf progs attaching to the same perf tracepoint is indeed enforced. $ ./syscall_tp -i 64 prog #0: map ids 4 5 ... prog #63: map ids 382 383 $ ./syscall_tp -i 65 prog #0: map ids 4 5 ... prog #64: map ids 388 389 ioctl PERF_EVENT_IOC_SET_BPF failed err Argument list too long Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-01bpf: set maximum number of attached progs to 64 for a single perf tpYonghong Song
cgropu+bpf prog array has a maximum number of 64 programs. Let us apply the same limit here. Fixes: e87c6bc3852b ("bpf: permit multiple bpf attachments for a single perf event") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-30Merge tag 'apparmor-pr-2017-11-30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor bugfix from John Johansen: "Fix oops in audit_signal_cb hook marked for stable" * tag 'apparmor-pr-2017-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix oops in audit_signal_cb hook
2017-11-30Merge tag 'acpi-4.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a regression related to the ACPI EC handling during system suspend/resume on some platforms and prevent modalias from being exposed to user space for ACPI device object with "not functional and not present" status. Specifics: - Fix an ACPI EC driver regression (from the 4.9 cycle) causing the driver's power management operations to be omitted during system suspend/resume on platforms where the EC instance from the ECDT table is used instead of the one from the DSDT (Lv Zheng). - Prevent modalias from being exposed to user space for ACPI device objects with _STA returning 0 (not present and not functional) to prevent driver modules from being loaded automatically for hardware that is not actually present on some platforms (Hans de Goede)" * tag 'acpi-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / EC: Fix regression related to PM ops support in ECDT device ACPI / bus: Leave modalias empty for devices which are not present
2017-11-30Merge tag 'pm-4.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: - add missing module information to the Mediatek cpufreq driver module (Jesse Chan) - fix config dependencies for the Loongson cpufreq driver (James Hogan) - fix two issues related to CPU offline in the cpupower utility (Abhishek Goel). * tag 'pm-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: mediatek: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE cpufreq: Add Loongson machine dependencies cpupower : Fix cpupower working when cpu0 is offline cpupowerutils: bench - Fix cpu online check
2017-11-30Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota & reiserfs changes from Jan Kara: - two error checking improvements for quota - remove bogus i_version increase for reiserfs * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Check for register_shrinker() failure. quota: propagate error from __dquot_initialize reiserfs: remove unneeded i_version bump
2017-11-30meson-gx-socinfo: Fix package id parsingArnaud Patard
I've noticed the following message while booting a S905X based board: soc soc0: Amlogic Meson GXL (S905D) Revision 21:82 (b:2) Detected The S905D string is obviously wrong. The vendor code does: ... ver = (readl(assist_hw_rev) >> 8) & 0xff; meson_cpu_version[MESON_CPU_VERSION_LVL_MINOR] = ver; ver = (readl(assist_hw_rev) >> 16) & 0xff; meson_cpu_version[MESON_CPU_VERSION_LVL_PACK] = ver; ... while the current code does: ... ... This means that the current mainline code has package id and minor version reversed. Fixes: a9daaba2965e8 ("soc: Add Amlogic SoC Information driver") Signed-off-by: Arnaud Patard <apatard@hupstream.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-11-30ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't"Colin Ian King
Trivial fix to spelling mistake in pr_err error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-11-30ARM: dts: meson: fix the memory region of the GPIO interrupt controllerMartin Blumenstingl
commit 200a575b68d2 ("ARM: dts: meson: organize devices in their corresponding busses") organized all peripherals in busses so that the base register offset of the bus doesn't have to be included in all child-nodes anymore. The GPIO interrupt controller however specifies the register offset without subtracting the "cbus" base address. This leads to a problem where of_iomap inside the irq-meson-gpio driver fails because it actually tries to map 0x182209880 (cbus base = 0xc1100000 + 0xc1109880 for the GPIO interrupt controller). Fix this by using 0x9880 as register offset. Fixes: 7d32bc03bcfb ("ARM: dts: meson8b: enable gpio interrupt controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2017-11-30ARM: dts: meson: correct the sort order for the the gpio_intc nodeMartin Blumenstingl
Nodes are sorted by their register start address. Move gpio_intc to the correct position. No functional changes intended. Fixes: 7d32bc03bcfb ("ARM: dts: meson8b: enable gpio interrupt controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 07:40:45 +0000