summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-09Merge tag 'for-v5.9-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply fix from Sebastian Reichel: "Just a single change to revert enablement of packet error checking for battery data on Chromebooks, since some of their embedded controllers do not handle it correctly" * tag 'for-v5.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: sbs-battery: chromebook workaround for PEC
2020-10-09blk-mq: get rid of the dead flush handle code pathYufen Yu
After commit 923218f6166a ("blk-mq: don't allocate driver tag upfront for flush rq"), blk_mq_submit_bio() will call blk_insert_flush() directly to handle flush request rather than blk_mq_sched_insert_request() in the case of elevator. Then, all flush request either have set RQF_FLUSH_SEQ flag when call blk_mq_sched_insert_request(), or have inserted into hctx->dispatch. So, remove the dead code path. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09block: get rid of unnecessary local variableYufen Yu
Since whole elevator register is protectd by sysfs_lock, we don't need extras 'has_elevator'. Just use q->elevator directly. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09block: fix comment and add lockdep assertYufen Yu
After commit b89f625e28d4 ("block: don't release queue's sysfs lock during switching elevator"), whole elevator register and unregister function are covered by sysfs_lock. So, remove wrong comment and add lockdep assert. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09blk-mq: use helper function to test hw stoppedYufen Yu
We have introduced helper function blk_mq_hctx_stopped() to test BLK_MQ_S_STOPPED. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09block: use helper function to test queue registerYufen Yu
We have defined common interface blk_queue_registered() to test QUEUE_FLAG_REGISTERED. Just use it. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09block: remove redundant mq checkYufen Yu
elv_support_iosched() will check queue_is_mq() for us. So, remove the redundant check to clean code. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09block: invoke blk_mq_exit_sched no matter whether have .exit_schedYufen Yu
We will register debugfs for scheduler no matter whether it have defined callback funciton .exit_sched. So, blk_mq_exit_sched() is always needed to unregister debugfs. Also, q->elevator should be set as NULL after exiting scheduler. For now, since all register scheduler have defined .exit_sched, it will not cause any actual problem. But It will be more reasonable to do this change. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09Merge tag 'gpio-v5.9-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Some late fixes: one IRQ issue and one compilation issue for UML. - Fix a compilation issue with User Mode Linux - Handle spurious interrupts properly in the PCA953x driver" * tag 'gpio-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: Survive spurious interrupts gpiolib: Disable compat ->read() code in UML case
2020-10-09percpu_ref: don't refer to ref->data if it isn't allocatedMing Lei
We can't check ref->data->confirm_switch directly in __percpu_ref_exit(), since ref->data may not be allocated in one not-initialized refcount. Fixes: 2b0d3d3e4fcf ("percpu_ref: reduce memory footprint of percpu_ref in fast path") Reported-by: syzbot+fd15ff734dace9e16437@syzkaller.appspotmail.com Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09EDAC/amd64: Set proper family type for Family 19h Models 20h-2FhYazen Ghannam
AMD Family 19h Models 20h-2Fh use the same PCI IDs as Family 17h Models 70h-7Fh. The same family ops and number of channels also apply. Use the Family17h Model 70h family_type and ops for Family 19h Models 20h-2Fh. Update the controller name to match the system. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20201009171803.3214354-1-Yazen.Ghannam@amd.com
2020-10-09Merge tag 'mmc-v5.9-rc4-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "Assign a proper discard granularity rather than incorrectly set it to zero" * tag 'mmc-v5.9-rc4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: don't set limits.discard_granularity as 0
2020-10-09Merge tag 'drm-fixes-2020-10-09' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull amdgpu drm fixes from Dave Airlie: "Fixes trickling in this week. Alex had a final fix for the newest GPU they introduced in rc1, along with one build regression and one crasher fix. Cross my fingers that's it for 5.9: - Fix a crash on renoir if you override the IP discovery parameter - Fix the build on ARC platforms - Display fix for Sienna Cichlid" * tag 'drm-fixes-2020-10-09' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Change ABM config init interface drm/amdgpu/swsmu: fix ARC build errors drm/amdgpu: fix NULL pointer dereference for Renoir
2020-10-09Documentation: better locations for sysfs-pci, sysfs-taggingJohn Hubbard
sysfs-pci and sysfs-tagging were mis-filed: their locations within Documentation/ implied that they were related to file systems. Actually, each topic is about a very specific *use* of sysfs, and sysfs *happens* to be a (virtual) filesystem, so this is not really the right place. It's jarring to be reading about filesystems in general and then come across these specific details about PCI, and tagging...and then back to general filesystems again. Move sysfs-pci to PCI, and move sysfs-tagging to networking. (Thanks to Jonathan Corbet for coming up with the final locations.) Signed-off-by: John Hubbard <jhubbard@nvidia.com> Link: https://lore.kernel.org/r/20201009070128.118639-1-jhubbard@nvidia.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-10-09MAINTAINERS: remove LIBATA PATA DRIVERS entryBartlomiej Zolnierkiewicz
Even though there is not much happening for libata PATA drivers I don't have time to look after them anymore. Since Jens is maintaining the whole libata anyway just remove "LIBATA PATA DRIVERS" entry. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09Merge branch 'md-next' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.10/drivers Pull MD updates from Song: "The main changes are: - Bug fixes in bitmap code, from Zhao Heming. - Fix a work queue check, from Guoqing Jiang. - Fix raid5 oops with reshape, from Song Liu. - Clean up unused code, from Jason Yan." * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid5: fix oops during stripe resizing md/bitmap: fix memory leak of temporary bitmap md: fix the checking of wrong work queue md/bitmap: md_bitmap_get_counter returns wrong blocks md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks md/raid0: remove unused function is_io_in_chunk_boundary()
2020-10-09Merge remote-tracking branch 'spi/for-5.10' into spi-nextMark Brown
2020-10-09Merge remote-tracking branch 'spi/for-5.9' into spi-linusMark Brown
2020-10-09spi: cadence: Add SPI transfer delaysDaniel Mack
When processing an SPI transfer, honor the delay that might be passed along with it. Signed-off-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20201009100309.381279-1-daniel@zonque.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-09io_uring: Convert advanced XArray uses to the normal APIMatthew Wilcox (Oracle)
There are no bugs here that I've spotted, it's just easier to use the normal API and there are no performance advantages to using the more verbose advanced API. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09io_uring: Fix XArray usage in io_uring_add_task_fileMatthew Wilcox (Oracle)
The xas_store() wasn't paired with an xas_nomem() loop, so if it couldn't allocate memory using GFP_NOWAIT, it would leak the reference to the file descriptor. Also the node pointed to by the xas could be freed between the call to xas_load() under the rcu_read_lock() and the acquisition of the xa_lock. It's easier to just use the normal xa_load/xa_store interface here. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> [axboe: fix missing assign after alloc, cur_uring -> tctx rename] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09io_uring: Fix use of XArray in __io_uring_files_cancelMatthew Wilcox (Oracle)
We have to drop the lock during each iteration, so there's no advantage to using the advanced API. Convert this to a standard xa_for_each() loop. Reported-by: syzbot+27c12725d8ff0bfe1a13@syzkaller.appspotmail.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09Revert "arm64: initialize per-cpu offsets earlier"Will Deacon
This reverts commit 353e228eb355be5a65a3c0996c774a0f46737fda. Qian Cai reports that TX2 no longer boots with his .config as it appears that task_cpu() gets instrumented and used before KASAN has been initialised. Although Mark has a proposed fix, let's take the safe option of reverting this for now and sorting it out properly later. Link: https://lore.kernel.org/r/711bc57a314d8d646b41307008db2845b7537b3d.camel@redhat.com Reported-by: Qian Cai <cai@redhat.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-10-09mmc: sdhci_am654: Fix module autoloadFaiz Abbas
Add a MODULE_DEVICE_TABLE() entry so that the driver is autoloaded when built as a module. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20201008100129.13917-1-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-10-09Merge branch 'fixes' into nextUlf Hansson
2020-10-09Merge branch 'lkmm' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core Pull LKMM changes for v5.10 from Paul E. McKenney. Various documentation updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-10-09Merge branch 'kcsan' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into locking/core Pull KCSAN updates for v5.10 from Paul E. McKenney: - Improve kernel messages. - Be more permissive with bitops races under KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=y. - Optimize debugfs stat counters. - Introduce the instrument_*read_write() annotations, to provide a finer description of certain ops - using KCSAN's compound instrumentation. Use them for atomic RNW and bitops, where appropriate. Doing this might find new races. (Depends on the compiler having tsan-compound-read-before-write=1 support.) - Support atomic built-ins, which will help certain architectures, such as s390. - Misc enhancements and smaller fixes. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-10-09Merge branch 'locking/urgent' into locking/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-10-09lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables"Peter Zijlstra
The thinking in commit: fddf9055a60d ("lockdep: Use raw_cpu_*() for per-cpu variables") is flawed. While it is true that when we're migratable both CPUs will have a 0 value, it doesn't hold that when we do get migrated in the middle of a raw_cpu_op(), the old CPU will still have 0 by the time we get around to reading it on the new CPU. Luckily, the reason for that commit (s390 using preempt_disable() instead of preempt_disable_notrace() in their percpu code), has since been fixed by commit: 1196f12a2c96 ("s390: don't trace preemption in percpu macros") An audit of arch/*/include/asm/percpu*.h shows there are no other architectures affected by this particular issue. Fixes: fddf9055a60d ("lockdep: Use raw_cpu_*() for per-cpu variables") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20201005095958.GJ2651@hirez.programming.kicks-ass.net
2020-10-09lockdep: Fix lockdep recursionPeter Zijlstra
Steve reported that lockdep_assert*irq*(), when nested inside lockdep itself, will trigger a false-positive. One example is the stack-trace code, as called from inside lockdep, triggering tracing, which in turn calls RCU, which then uses lockdep_assert_irqs_disabled(). Fixes: a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables") Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-10-09lockdep: Fix usage_traceoverflowPeter Zijlstra
Basically print_lock_class_header()'s for loop is out of sync with the the size of of ->usage_traces[]. Also clean things up a bit while at it, to avoid such mishaps in the future. Fixes: 23870f122768 ("locking/lockdep: Fix "USED" <- "IN-NMI" inversions") Reported-by: Qian Cai <cai@redhat.com> Debugged-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Qian Cai <cai@redhat.com> Link: https://lkml.kernel.org/r/20200930094937.GE2651@hirez.programming.kicks-ass.net
2020-10-09mmc: core: don't set limits.discard_granularity as 0Coly Li
In mmc_queue_setup_discard() the mmc driver queue's discard_granularity might be set as 0 (when card->pref_erase > max_discard) while the mmc device still declares to support discard operation. This is buggy and triggered the following kernel warning message, WARNING: CPU: 0 PID: 135 at __blkdev_issue_discard+0x200/0x294 CPU: 0 PID: 135 Comm: f2fs_discard-17 Not tainted 5.9.0-rc6 #1 Hardware name: Google Kevin (DT) pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) pc : __blkdev_issue_discard+0x200/0x294 lr : __blkdev_issue_discard+0x54/0x294 sp : ffff800011dd3b10 x29: ffff800011dd3b10 x28: 0000000000000000 x27: ffff800011dd3cc4 x26: ffff800011dd3e18 x25: 000000000004e69b x24: 0000000000000c40 x23: ffff0000f1deaaf0 x22: ffff0000f2849200 x21: 00000000002734d8 x20: 0000000000000008 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000394 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 00000000000008b0 x9 : ffff800011dd3cb0 x8 : 000000000004e69b x7 : 0000000000000000 x6 : ffff0000f1926400 x5 : ffff0000f1940800 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 0000000000000008 x1 : 00000000002734d8 x0 : 0000000000000000 Call trace: __blkdev_issue_discard+0x200/0x294 __submit_discard_cmd+0x128/0x374 __issue_discard_cmd_orderly+0x188/0x244 __issue_discard_cmd+0x2e8/0x33c issue_discard_thread+0xe8/0x2f0 kthread+0x11c/0x120 ret_from_fork+0x10/0x1c ---[ end trace e4c8023d33dfe77a ]--- This patch fixes the issue by setting discard_granularity as SECTOR_SIZE instead of 0 when (card->pref_erase > max_discard) is true. Now no more complain from __blkdev_issue_discard() for the improper value of discard granularity. This issue is exposed after commit b35fd7422c2f ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()"), a "Fixes:" tag is also added for the commit to make sure people won't miss this patch after applying the change of __blkdev_issue_discard(). Fixes: e056a1b5b67b ("mmc: queue: let host controllers specify maximum discard timeout") Fixes: b35fd7422c2f ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()"). Reported-and-tested-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20201002013852.51968-1-colyli@suse.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-10-09perf: Fix task_function_call() error handlingKajol Jain
The error handling introduced by commit: 2ed6edd33a21 ("perf: Add cond_resched() to task_function_call()") looses any return value from smp_call_function_single() that is not {0, -EINVAL}. This is a problem because it will return -EXNIO when the target CPU is offline. Worse, in that case it'll turn into an infinite loop. Fixes: 2ed6edd33a21 ("perf: Add cond_resched() to task_function_call()") Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Barret Rhoden <brho@google.com> Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/20200827064732.20860-1-kjain@linux.ibm.com
2020-10-08md/raid5: fix oops during stripe resizingSong Liu
KoWei reported crash during raid5 reshape: [ 1032.252932] Oops: 0002 [#1] SMP PTI [...] [ 1032.252943] RIP: 0010:memcpy_erms+0x6/0x10 [...] [ 1032.252947] RSP: 0018:ffffba1ac0c03b78 EFLAGS: 00010286 [ 1032.252949] RAX: 0000784ac0000000 RBX: ffff91bec3d09740 RCX: 0000000000001000 [ 1032.252951] RDX: 0000000000001000 RSI: ffff91be6781c000 RDI: 0000784ac0000000 [ 1032.252953] RBP: ffffba1ac0c03bd8 R08: 0000000000001000 R09: ffffba1ac0c03bf8 [ 1032.252954] R10: 0000000000000000 R11: 0000000000000000 R12: ffffba1ac0c03bf8 [ 1032.252955] R13: 0000000000001000 R14: 0000000000000000 R15: 0000000000000000 [ 1032.252958] FS: 0000000000000000(0000) GS:ffff91becf500000(0000) knlGS:0000000000000000 [ 1032.252959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1032.252961] CR2: 0000784ac0000000 CR3: 000000031780a002 CR4: 00000000001606e0 [ 1032.252962] Call Trace: [ 1032.252969] ? async_memcpy+0x179/0x1000 [async_memcpy] [ 1032.252977] ? raid5_release_stripe+0x8e/0x110 [raid456] [ 1032.252982] handle_stripe_expansion+0x15a/0x1f0 [raid456] [ 1032.252988] handle_stripe+0x592/0x1270 [raid456] [ 1032.252993] handle_active_stripes.isra.0+0x3cb/0x5a0 [raid456] [ 1032.252999] raid5d+0x35c/0x550 [raid456] [ 1032.253002] ? schedule+0x42/0xb0 [ 1032.253006] ? schedule_timeout+0x10e/0x160 [ 1032.253011] md_thread+0x97/0x160 [ 1032.253015] ? wait_woken+0x80/0x80 [ 1032.253019] kthread+0x104/0x140 [ 1032.253022] ? md_start_sync+0x60/0x60 [ 1032.253024] ? kthread_park+0x90/0x90 [ 1032.253027] ret_from_fork+0x35/0x40 This is because cache_size_mutex was unlocked too early in resize_stripes, which races with grow_one_stripe() that grow_one_stripe() allocates a stripe with wrong pool_size. Fix this issue by unlocking cache_size_mutex after updating pool_size. Cc: <stable@vger.kernel.org> # v4.4+ Reported-by: KoWei Sung <winders@amazon.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-10-08md/bitmap: fix memory leak of temporary bitmapZhao Heming
Callers of get_bitmap_from_slot() are responsible to free the bitmap. Suggested-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-10-08md: fix the checking of wrong work queueGuoqing Jiang
It should check md_rdev_misc_wq instead of md_misc_wq. Fixes: cc1ffe61c026 ("md: add new workqueue for delete rdev") Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-10-08md/bitmap: md_bitmap_get_counter returns wrong blocksZhao Heming
md_bitmap_get_counter() has code: ``` if (bitmap->bp[page].hijacked || bitmap->bp[page].map == NULL) csize = ((sector_t)1) << (bitmap->chunkshift + PAGE_COUNTER_SHIFT - 1); ``` The minus 1 is wrong, this branch should report 2048 bits of space. With "-1" action, this only report 1024 bit of space. This bug code returns wrong blocks, but it doesn't inflence bitmap logic: 1. Most callers focus this function return value (the counter of offset), not the parameter blocks. 2. The bug is only triggered when hijacked is true or map is NULL. the hijacked true condition is very rare. the "map == null" only true when array is creating or resizing. 3. Even the caller gets wrong blocks, current code makes caller just to call md_bitmap_get_counter() one more time. Signed-off-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-10-08md/bitmap: md_bitmap_read_sb uses wrong bitmap blocksZhao Heming
The patched code is used to get chunks number, should use round-up div to replace current sector_div. The same code is in md_bitmap_resize(): ``` chunks = DIV_ROUND_UP_SECTOR_T(blocks, 1 << chunkshift); ``` Signed-off-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-10-08md/raid0: remove unused function is_io_in_chunk_boundary()Jason Yan
This function is no longger needed after commit 20d0189b1012 ("block: Introduce new bio_split()"). Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-10-09Merge tag 'amd-drm-fixes-5.9-2020-10-08' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.9-2020-10-08: amdgpu: - Fix a crash on renoir if you override the IP discovery parameter - Fix the build on ARC platforms - Display fix for Sienna Cichlid Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201009024917.3984-1-alexander.deucher@amd.com
2020-10-08io_uring: fix break condition for __io_uring_register() waitingJens Axboe
Colin reports that there's unreachable code, since we only ever break if ret == 0. This is correct, and is due to a reversed logic condition in when to break or not. Break out of the loop if we don't process any task work, in that case we do want to return -EINTR. Fixes: af9c1a44f8de ("io_uring: process task work in io_uring_register()") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09erofs: remove unnecessary enum entriesChengguang Xu
Opt_nouser_xattr and Opt_noacl are useless, so just remove them. Signed-off-by: Chengguang Xu <cgxu519@mykernel.net> Reviewed-by: Gao Xiang <hsiangkao@redhat.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Link: https://lore.kernel.org/r/20201005071550.66193-1-cgxu519@mykernel.net Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
2020-10-08Merge tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few fixes that should go into this release: - NVMe controller error path reference fix (Chaitanya) - Fix regression with IBM partitions on non-dasd devices (Christoph) - Fix a missing clear in the compat CDROM packet structure (Peilin)" * tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block: partitions/ibm: fix non-DASD devices nvme-core: put ctrl ref when module ref get fail block/scsi-ioctl: Fix kernel-infoleak in scsi_put_cdrom_generic_arg()
2020-10-09power: supply: sbs-battery: chromebook workaround for PECSebastian Reichel
Looks like the I2C tunnel implementation from Chromebook's embedded controller does not handle PEC correctly. Fix this by disabling PEC for batteries behind those I2C tunnels as a workaround. Note, that some Chromebooks actually have been reported to have working PEC support (with I2C tunnel). Since the problem has not yet been fully understood this simply reverts all Chromebooks to not use PEC for now. Reported-by: "Milan P. Stanić" <mps@arvanta.net> Reported-by: Vicente Bergas <vicencb@gmail.com> CC: Enric Balletbo i Serra <enric.balletbo@collabora.com> Fixes: 7222bd603dd2 ("power: supply: sbs-battery: add PEC support") Tested-by: Vicente Bergas <vicencb@gmail.com> Tested-by: "Milan P. Stanić" <mps@arvanta.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2020-10-08spi: dw: Add Baikal-T1 SPI Controller bindingsSerge Semin
These controllers are based on the DW APB SSI IP-core and embedded into the SoC, so two of them are equipped with IRQ, DMA, 64 words FIFOs and 4 native CS, while another one as being utilized by the Baikal-T1 System Boot Controller has got a very limited resources: no IRQ, no DMA, only a single native chip-select and just 8 bytes Tx/Rx FIFOs available. That's why we have to mark the IRQ to be optional for the later interface. The SPI controller embedded into the Baikal-T1 System Boot Controller can be also used to directly access an external SPI flash by means of a dedicated FSM. The corresponding MMIO region availability is switchable by the embedded multiplexor, which phandle can be specified in the dts node. * We added a new example to test out the non-standard Baikal-T1 System Boot SPI Controller DT binding. Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201007235511.4935-21-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-08spi: dw: Add Baikal-T1 SPI Controller glue driverSerge Semin
Baikal-T1 is equipped with three DW APB SSI-based MMIO SPI controllers. Two of them are pretty much normal: with IRQ, DMA, FIFOs of 64 words depth, 4x CSs, but the third one as being a part of the Baikal-T1 System Boot Controller has got a very limited resources: no IRQ, no DMA, only a single native chip-select and Tx/Rx FIFO with just 8 words depth available. In order to provide a transparent initial boot code execution the Boot SPI controller is also utilized by an vendor-specific IP-block, which exposes an SPI flash direct mapping interface. Since both direct mapping and SPI controller normal utilization are mutual exclusive only one of these interfaces can be used to access an external SPI slave device. That's why a dedicated mux is embedded into the System Boot Controller. All of that is taken into account in the Baikal-T1-specific DW APB SSI glue driver implemented by means of the DW SPI core module. Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201007235511.4935-22-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-08spi: dw: Add poll-based SPI transfers supportSerge Semin
A functionality of the poll-based transfer has been removed by commit 1ceb09717e98 ("spi: dw: remove cs_control and poll_mode members from chip_data") with a justification that "there is no user of one anymore". It turns out one of our DW APB SSI core is synthesized with no IRQ line attached and the only possible way of using it is to implement a poll-based SPI transfer procedure. So we have to get the removed functionality back, but with some alterations described below. First of all the poll-based transfer is activated only if the DW SPI controller doesn't have an IRQ line attached and the Linux IRQ number is initialized with the IRQ_NOTCONNECTED value. Secondly the transfer procedure is now executed with a delay performed between writer and reader methods. The delay value is calculated based on the number of data words expected to be received on the current iteration. Finally the errors status is checked on each iteration. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201007235511.4935-20-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-08spi: dw: Introduce max mem-ops SPI bus frequency settingSerge Semin
In some circumstances the current implementation of the SPI memory operations may occasionally fail even though they are executed in the atomic context. This may happen if the system bus is relatively slow in comparison to the SPI bus frequency, or there is a concurrent access to it, which makes the MMIO-operations occasionally stalling before push-pulling data from the DW APB SPI FIFOs. These two problems we've discovered on the Baikal-T1 SoC. In order to fix them we have no choice but to set an artificial limitation on the SPI bus speed. Note currently this limitation will be only applicable for the memory operations, since the standard SPI core interface is implemented with an assumption that there is no problem with the automatic CS toggling. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201007235511.4935-19-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-08spi: dw: Add memory operations supportSerge Semin
Aside from the synchronous Tx-Rx mode, which has been utilized to create the normal SPI transfers in the framework of the DW SSI driver, DW SPI controller supports Tx-only and EEPROM-read modes. The former one just enables the controller to transmit all the data from the Tx FIFO ignoring anything retrieved from the MISO lane. The later mode is so called write-then-read operation: DW SPI controller first pushes out all the data from the Tx FIFO, after that it'll automatically receive as much data as has been specified by means of the CTRLR1 register. Both of those modes can be used to implement the memory operations supported by the SPI-memory subsystem. The memory operation implementation is pretty much straightforward, except a few peculiarities we have had to take into account to make things working. Since DW SPI controller doesn't provide a way to directly set and clear the native CS lane level, but instead automatically de-asserts it when a transfer going on, we have to make sure the Tx FIFO isn't empty during entire Tx procedure. In addition we also need to read data from the Rx FIFO as fast as possible to prevent it' overflow with automatically fetched incoming traffic. The denoted peculiarities get to cause even more problems if DW SSI controller is equipped with relatively small FIFO and is connected to a relatively slow system bus (APB) (with respect to the SPI bus speed). In order to workaround the problems for as much as it's possible, the memory operation execution procedure collects all the Tx data into a single buffer and disables the local IRQs to speed the write-then-optionally-read method up. Note the provided memory operations are utilized by default only if a glue driver hasn't provided a custom version of ones and this is not a DW APB SSI controller with fixed automatic CS toggle functionality. Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201007235511.4935-18-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-08spi: dw: Add generic DW SSI status-check methodSerge Semin
The DW SSI errors handling method can be generically implemented for all types of the transfers: IRQ, DMA and poll-based ones. It will be a function which checks the overflow/underflow error flags and resets the controller if any of them is set. In the framework of this commit we make use of the new method to detect the errors in the IRQ- and DMA-based SPI transfer execution procedures. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201007235511.4935-17-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:29:25 +0000