summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-13wifi: rtl8xxxu: Register the LED and make it blinkBitterblue Smith
If the chip can have an LED, register a struct led_classdev and enable hardware-controlled blinking. When the chip is not transmitting or receiving anything the LED is off. Otherwise the LED will blink faster or slower according to the throughput. The LED can be controlled from userspace by writing 0, 1, or 2 to /sys/class/leds/rtl8xxxu-usbX-Y/brightness: 0 - solid off. 1 - solid on. 2 - hardware-controlled blinking. In this patch none of the chips advertise having an LED. That will be added in the next patches. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/b8235bca-60c3-d0fe-a958-53c6dd3ba3f6@gmail.com
2023-02-13wifi: rsi: Avoid defines prefixed with CONFIGPeter Lafreniere
Macros prefixed with CONFIG_ are intended to be defined only by Kconfig scripts. Here we remove the prefix from the CONFIG_AUTO_READ_MODE define to avoid confusion when reading the code. This causes no change to functionality. Signed-off-by: Peter Lafreniere <peter@n8pjl.ca> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230118185353.2422-1-peter@n8pjl.ca
2023-02-13wifi: rtw89: phy: set TX power according to RF path number by chipZong-Zhe Yang
Previously, all supported chips had two RF paths. Therefore, these codes used static number for TX power setting. Now, we are planning to support a new chip which has only one RF path. So, we refine the setting codes to refer to chip's RF path number at runtime. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230203065157.8227-1-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852b: correct register mask name of TX power offsetPing-Ke Shih
For a packet with 1SS rate, it can also transmit via 2 antenna, called 2T mode. For 2T TX power offset, mask should be 2T as well. Fortunately, the mask of 2T and 1T are the same, so it can still work well without this fix. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230203064907.8046-1-pkshih@realtek.com
2023-02-13wifi: rtw89: use passed channel in set_tx_shape_dfir()Zong-Zhe Yang
In path of setting channel and setting TX power, the rtw89_chan instance to be used is controlled by top and passed down. The set_tx_shape_dfir() is in path of setting TX power, so it should use the passed rtw89_chan instead of querying it itself. Otherwise, it might encounter mismatch between parameters if multi-channel. For example, rtw89_8852ce 0000:04:00.0: set tx shape dfir by unknown ch: 155 on 2GHz Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230201032057.7349-1-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852be: enable CLKREQ of PCI capabilityChin-Yen Lee
Enable CLKREQ to reduce power consumption for 8852BE. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230126112715.5811-1-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852b: try to use NORMAL_CE type firmware firstPing-Ke Shih
New firmware type NORMAL_CE is introduced to support P2P-PS and hardware scan, but no LPS-PG mode. After this patch, old firmware with NORMAL type can still work well. The use of this new type is the same as before, so we add new type to avoid taking wrong firmware. Then, driver log can also give clear information about this change: rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5 rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-7-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852b: don't support LPS-PG mode after firmware 0.29.26.0Ping-Ke Shih
Due to firmware size limit of 8852b, LPS-PG mode isn't supported after 0.29.26.0, and then we have more space to support other features, such as P2P-PS, hardware scan and so on. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-6-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852b: reset IDMEM mode to default valuePing-Ke Shih
For different firmware type, it could use different IDMEM mode, so reset it to default to avoid encountering error during we bisect firmware version, like rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5 rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3 rtw89_8852be 0000:03:00.0: fw security fail rtw89_8852be 0000:03:00.0: download firmware fail rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x1E0 = 0x62 rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x83F2 = 0x8 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931150 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-5-pkshih@realtek.com
2023-02-13wifi: rtw89: add use of pkt_list offload to debug entryPing-Ke Shih
Driver can prepare pkt_list for firmware that only uses them to send out the packets in specific situations. To understand the usage of current status, and to check if there is leakage problem, dump bitmap and the indices used by certain function. An example looks like: map: ... pkt_ofld: 3f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... [SCAN 0]: 3 [SCAN 1]: 4 [SCAN 3]: 5 VIF [0] xx:xx:xx:xx:xx:xx ... pkt_ofld[GENERAL]: 0 1 2 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-4-pkshih@realtek.com
2023-02-13wifi: rtw89: refine packet offload flowChin-Yen Lee
For upcoming firmware, driver needs to do packet offload to firmware to ensure LPS protocol work properly, so we update current connection and disconnect flow to maintain packet offload flow, and integrate with current WoWLAN flow which also needs packet offload. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-3-pkshih@realtek.com
2023-02-13wifi: rtw89: fix potential wrong mapping for pkt-offloadChin-Yen Lee
When driver fails to send H2C to firmware for pkt-offload, we should not update the pkt_list of driver, and need to release allocated pkt index to avoid wrong mapping between driver and firmware. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-2-pkshih@realtek.com
2023-02-13wifi: rtw89: disallow enter PS mode after create TDLS linkKuan-Chung Chen
Buffer STA on TDLS links are not currently supported. Therefore, it is not allowed to enter the PS mode after TDLS link is established. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119064631.66971-1-pkshih@realtek.com
2023-02-13wifi: rtw89: refine MCC C2H debug logsZong-Zhe Yang
To debug channel concurrency more centrally, we add a new debug flag, RTW89_DBG_CHAN, for channel related things, especially channel concurrency. Then, we change MCC (multi-channel concurrency) C2H (chip to host packets) debug flag to it. Besides, refine debug logs to show TSF in u64 directly. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119064342.65391-2-pkshih@realtek.com
2023-02-13wifi: rtw89: fix parsing offset for MCC C2HZong-Zhe Yang
A 8-byte offset is missed during parsing C2Hs (chip to host packets) of MCC (multi-channel concurrent) series. So, we fix it. Fixes: ef9dff4cb491 ("wifi: rtw89: mac: process MCC related C2H") Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119064342.65391-1-pkshih@realtek.com
2023-02-13wifi: rtw89: deal with RXI300 errorZong-Zhe Yang
RXI300 is a HW design to maintain stuffs across BUS, e.g. AXI, AHB, APB. It will feedback an error when host does an invalid BUS operation. For example, * BUS master request without power/clock on. * host reads/writes/accesses an invalid address. They might lead to problems such as BUS timeout, platform hang, etc. So, once if RXI300 feedback an error, it notifies that driver need a L2 SER (system error recovery) to reset things. Previously, driver did not parse the error scenario for RXI300. We add it and assign a corresponding error code which will make SER flow do L2 reset. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119063529.61563-3-pkshih@realtek.com
2023-02-13wifi: rtw89: debug: avoid invalid access on RTW89_DBG_SEL_MAC_30Zong-Zhe Yang
Only 8852C chip has valid pages on RTW89_DBG_SEL_MAC_30. To other chips, this section is an address hole. It will lead to crash if trying to access this section on chips except for 8852C. So, we avoid that. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119063529.61563-2-pkshih@realtek.com
2023-02-13wifi: rtw89: mac: add function to get TSFZong-Zhe Yang
Add mac function rtw89_mac_port_get_tsf() to get TSF by port. It will be used when MCC (multi-channel concurrency) calculates timing things. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119062453.58341-4-pkshih@realtek.com
2023-02-13wifi: rtw89: split out generic part of rtw89_mac_port_tsf_sync()Zong-Zhe Yang
Originally, rtw89_mac_port_tsf_sync() contains randomization logic internally. However, not all situation, we need the randomization. So, split out the generic part from it. And, make the full logic of original one contained in rtw89_mac_port_tsf_sync_rand(). It will still be used by its original caller as before. Then, the generic one will be used in MCC (multi-channel concurrency) management flow. MCC will implement its logic to decide the offset for TSF sync. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119062453.58341-3-pkshih@realtek.com
2023-02-13wifi: rtw89: correct unit for port offset and refine macroZong-Zhe Yang
Strictly speaking, the unit of the offset should be TU instead of ms. So, correct it and the macro for calculation. Then, to make the macro generic, the factor n is moved outside. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119062453.58341-2-pkshih@realtek.com
2023-02-13wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.0Ching-Te Ku
Should update the driver with the supported firmware version of the below item. Bluetooth firmware BT_Coex_Ver: 0x07 Wi-Fi firmware version: RTL8852C->v0.27.56.10, RTL8852A->v0.24.36 Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230117114109.4298-9-pkshih@realtek.com
2023-02-13wifi: rtw89: coex: Fix test fail when coexist with raspberryPI A2DP idleChing-Te Ku
The origin code will enable TDMA WL:BT = 50:50 to prevent Wi-Fi throughput suddenly drop to 0 in the moment while A2DP pause. And this protection just a short moment, and will turn to Bluetooth idle case when A2DP turn into sniff mode. But the raspberryPI simulated A2DP device will not turn into sniff mode. So the protection will bring the throughput drop. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230117114109.4298-8-pkshih@realtek.com
2023-02-13wifi: rtw89: coex: Correct A2DP exist variable sourceChing-Te Ku
When Wi-Fi enter and leave LPS, coexistence driver need to know is there A2DP exist or not. And when Wi-Fi sleep in deep power save state will not able to receive mailbox sent from Bluetooth. So update the A2DP exist information from reading register. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230117114109.4298-7-pkshih@realtek.com
2023-02-13wifi: rtw89: coex: Set Bluetooth background scan PTA request priorityChing-Te Ku
When Wi-Fi is RX, set Bluetooth background scan to low-priority and not to break Wi-Fi packet. Bluetooth can RX depend on hardware ability even RX request has been rejected. This way can improve Wi-Fi RX throughput performance. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230117114109.4298-6-pkshih@realtek.com
2023-02-13wifi: rtw89: coex: Refine coexistence logChing-Te Ku
Adjust the log format and correct variable reference to make the log more readable. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230117114109.4298-5-pkshih@realtek.com
2023-02-13wifi: rtw89: coex: Force to update TDMA parameter when radio state changeChing-Te Ku
Force firmware to update TDMA parameter when enter/exit power saving. The TDMA instant feature will make firmware force update TDMA parameter immediately when the TDMA parameter H2C to firmware. Without this feature, it will have a low fail rate trigger Bluetooth audio sound glitch when Wi-Fi is under power saving. Or Wi-Fi fail to turn in to power save state. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230117114109.4298-4-pkshih@realtek.com
2023-02-13wifi: rtw89: coex: Clear Bluetooth HW PTA counter when radio state changeChing-Te Ku
Reset the counter no matter Wi-Fi is notified turning into power save or not. With rest the counter coexistence will recognize Bluetooth is hanged easily. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230117114109.4298-3-pkshih@realtek.com
2023-02-13wifi: rtw89: coex: Update Wi-Fi external control TDMA parameters/tablesChing-Te Ku
This patch update the external control (Wi-Fi firmware control) type of TDMA related parameters, almost all of these case were related to Wi-Fi multi-role situations & AP mode. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230117114109.4298-2-pkshih@realtek.com
2023-02-13wifi: brcmfmac: change cfg80211_set_channel() name and signatureArend van Spriel
The function cfg80211_set_channel() is an static function in brcmfmac but the name is misleading. Hence rename it with 'brcmf' prefix. Also changing the parameters to avoid additional conversions. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230103124117.271988-4-arend.vanspriel@broadcom.com
2023-02-13wifi: mwifiex: fix loop iterator in mwifiex_update_ampdu_txwinsize()Dan Carpenter
This code re-uses "i" to be the iterator for both the inside and outside loops. It means the outside loop will exit earlier than intended. Fixes: d219b7eb3792 ("mwifiex: handle BT coex event to adjust Rx BA window size") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/Y+ERnaDaZD7RtLvX@kili
2023-02-13wifi: mwifiex: Replace one-element array with flexible-array memberGustavo A. R. Silva
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct mwifiex_ie_types_rates_param_set. These are the only binary differences I see after the change: mwifiex.o _@@ -50154,7 +50154,7 @@ 23514: R_X86_64_32S kmalloc_caches+0x50 23518: call 2351d <mwifiex_scan_networks+0x11d> 23519: R_X86_64_PLT32 __tsan_read8-0x4 - 2351d: mov $0x225,%edx + 2351d: mov $0x224,%edx 23522: mov $0xdc0,%esi 23527: mov 0x0(%rip),%rdi # 2352e <mwifiex_scan_networks+0x12e> 2352a: R_X86_64_PC32 kmalloc_caches+0x4c scan.o _@@ -5582,7 +5582,7 @@ 4394: R_X86_64_32S kmalloc_caches+0x50 4398: call 439d <mwifiex_scan_networks+0x11d> 4399: R_X86_64_PLT32 __tsan_read8-0x4 - 439d: mov $0x225,%edx + 439d: mov $0x224,%edx 43a2: mov $0xdc0,%esi 43a7: mov 0x0(%rip),%rdi # 43ae <mwifiex_scan_networks+0x12e> 43aa: R_X86_64_PC32 kmalloc_caches+0x4c and the reason for that is the following line: drivers/net/wireless/marvell/mwifiex/scan.c: 1517 scan_cfg_out = kzalloc(sizeof(union mwifiex_scan_cmd_config_tlv), 1518 GFP_KERNEL); sizeof(union mwifiex_scan_cmd_config_tlv) is now one-byte smaller due to the flex-array transformation: 46 union mwifiex_scan_cmd_config_tlv { 47 /* Scan configuration (variable length) */ 48 struct mwifiex_scan_cmd_config config; 49 /* Max allocated block */ 50 u8 config_alloc_buf[MAX_SCAN_CFG_ALLOC]; 51 }; Notice that MAX_SCAN_CFG_ALLOC is defined in terms of sizeof(struct mwifiex_ie_types_rates_param_set), see: 26 /* Memory needed to store supported rate */ 27 #define RATE_TLV_MAX_SIZE (sizeof(struct mwifiex_ie_types_rates_param_set) \ 28 + HOSTCMD_SUPPORTED_RATES) 37 /* Maximum memory needed for a mwifiex_scan_cmd_config with all TLVs at max */ 38 #define MAX_SCAN_CFG_ALLOC (sizeof(struct mwifiex_scan_cmd_config) \ 39 + sizeof(struct mwifiex_ie_types_num_probes) \ 40 + sizeof(struct mwifiex_ie_types_htcap) \ 41 + CHAN_TLV_MAX_SIZE \ 42 + RATE_TLV_MAX_SIZE \ 43 + WILDCARD_SSID_TLV_MAX_SIZE) This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/252 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/Y9xkjXeElSEQ0FPY@work
2023-02-13wifi: mwifiex: Replace one-element arrays with flexible-array membersGustavo A. R. Silva
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element arrays with flexible-array members in multiple structures. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. This results in no differences in binary output. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/256 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/Y9xkECG3uTZ6T1dN@work
2023-02-13wifi: brcmfmac: Replace one-element array with flexible-array memberGustavo A. R. Silva
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct brcmf_tlv. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. This results in no differences in binary output. Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/253 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/Y9xjizhMujNEtpB4@work
2023-02-13wifi: mwifiex: Support firmware hotfix version in GET_HW_SPEC responsesLukas Wunner
Support the firmware hotfix version in GET_HW_SPEC responses to avoid an irritating "Unknown api_id: 5" message on probe. Based on this commit in NXP's GPLv2-licensed out-of-tree driver: https://github.com/nxp-imx/mwifiex/commit/27fd8ecca504 Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/111c7ee895f12d951e95a2edcd06d87ca26a7d0f.1674827105.git.lukas@wunner.de
2023-02-13wifi: mwifiex: Support SD8978 chipsetLukas Wunner
The Marvell SD8978 (aka NXP IW416) uses identical registers as SD8987, so reuse the existing mwifiex_reg_sd8987 definition. Note that mwifiex_reg_sd8977 and mwifiex_reg_sd8997 are likewise identical, save for the fw_dump_ctrl register: They define it as 0xf0 whereas mwifiex_reg_sd8987 defines it as 0xf9. I've verified that 0xf9 is the correct value on SD8978. NXP's out-of-tree driver uses 0xf9 for all of them, so there's a chance that 0xf0 is not correct in the mwifiex_reg_sd8977 and mwifiex_reg_sd8997 definitions. I cannot test that for lack of hardware, hence am leaving it as is. NXP has only released a firmware which runs Bluetooth over UART. Perhaps Bluetooth over SDIO is unsupported by this chipset. Consequently, only an "sdiouart" firmware image is referenced, not an alternative "sdsd" image. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/536b4f17a72ca460ad1b07045757043fb0778988.1674827105.git.lukas@wunner.de
2023-02-13wifi: mwifiex: Add missing compatible string for SD8787Lukas Wunner
Commit e3fffc1f0b47 ("devicetree: document new marvell-8xxx and pwrseq-sd8787 options") documented a compatible string for SD8787 in the devicetree bindings, but neglected to add it to the mwifiex driver. Fixes: e3fffc1f0b47 ("devicetree: document new marvell-8xxx and pwrseq-sd8787 options") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.11+ Cc: Matt Ranostay <mranostay@ti.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/320de5005ff3b8fd76be2d2b859fd021689c3681.1674827105.git.lukas@wunner.de
2023-02-13wifi: brcmfmac: pcie: Perform correct BCM4364 firmware selectionHector Martin
This chip exists in two revisions (B2=r3 and B3=r4) on different platforms, and was added without regard to doing proper firmware selection or differentiating between them. Fix this to have proper per-revision firmwares and support Apple NVRAM selection. Revision B2 is present on at least these Apple T2 Macs: kauai: MacBook Pro 15" (Touch/2018-2019) maui: MacBook Pro 13" (Touch/2018-2019) lanai: Mac mini (Late 2018) ekans: iMac Pro 27" (5K, Late 2017) And these non-T2 Macs: nihau: iMac 27" (5K, 2019) Revision B3 is present on at least these Apple T2 Macs: bali: MacBook Pro 16" (2019) trinidad: MacBook Pro 13" (2020, 4 TB3) borneo: MacBook Pro 16" (2019, 5600M) kahana: Mac Pro (2019) kahana: Mac Pro (2019, Rack) hanauma: iMac 27" (5K, 2020) kure: iMac 27" (5K, 2020, 5700/XT) Also fix the firmware interface for 4364, from BCA to WCC. Fixes: 24f0bd136264 ("brcmfmac: add the BRCM 4364 found in MacBook Pro 15,2") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230212063813.27622-5-marcan@marcan.st
2023-02-13wifi: brcmfmac: pcie: Add IDs/properties for BCM4377Hector Martin
This chip is present on at least these Apple T2 Macs: * tahiti: MacBook Pro 13" (2020, 2 TB3) * formosa: MacBook Pro 13" (Touch/2019) * fiji: MacBook Air 13" (Scissor, 2020) Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230212063813.27622-4-marcan@marcan.st
2023-02-13wifi: brcmfmac: pcie: Add IDs/properties for BCM4355Hector Martin
This chip is present on at least these Apple T2 Macs: * hawaii: MacBook Air 13" (Late 2018) * hawaii: MacBook Air 13" (True Tone, 2019) Users report seeing PCI revision ID 12 for this chip, which Arend reports should be revision C2, but Apple has the firmware tagged as revision C1. Assume the right cutoff point for firmware versions is revision ID 11 then, and leave older revisions using the non-versioned firmware filename (Apple only uses C1 firmware builds). Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230212063813.27622-3-marcan@marcan.st
2023-02-13wifi: brcmfmac: Rename Cypress 89459 to BCM4355Hector Martin
The commit that introduced support for this chip incorrectly claimed it is a Cypress-specific part, while in actuality it is just a variant of BCM4355 silicon (as evidenced by the chip ID). The relationship between Cypress products and Broadcom products isn't entirely clear but given what little information is available and prior art in the driver, it seems the convention should be that originally Broadcom parts should retain the Broadcom name. Thus, rename the relevant constants and firmware file. Also rename the specific 89459 PCIe ID to BCM43596, which seems to be the original subvariant name for this PCI ID (as defined in the out-of-tree bcmdhd driver). Since Cypress added this part and will presumably be providing its supported firmware, we keep the CYW designation for this device. We also drop the RAW device ID in this commit. We don't do this for the other chips since apparently some devices with them exist in the wild, but there is already a 4355 entry with the Broadcom subvendor and WCC firmware vendor, so adding a generic fallback to Cypress seems redundant (no reason why a device would have the raw device ID *and* an explicitly programmed subvendor). Fixes: dce45ded7619 ("brcmfmac: Support 89459 pcie") Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230212063813.27622-2-marcan@marcan.st
2023-02-13dt-bindings: net: wireless: minor whitespace and name cleanupsKrzysztof Kozlowski
Minor cleanups: - Drop redundant blank lines, - Correct indentaion in examples, - Correct node names in examples to drop underscore and use generic name. No functional impact except adjusting to preferred coding style. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230118175413.360153-1-krzysztof.kozlowski@linaro.org
2023-02-13wifi: iwl4965: Add missing check for create_singlethread_workqueue()Jiasheng Jiang
Add the check for the return value of the create_singlethread_workqueue() in order to avoid NULL pointer dereference. Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230209010748.45454-1-jiasheng@iscas.ac.cn
2023-02-13wifi: iwl3945: Add missing check for create_singlethread_workqueueJiasheng Jiang
Add the check for the return value of the create_singlethread_workqueue in order to avoid NULL pointer dereference. Fixes: b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230208063032.42763-2-jiasheng@iscas.ac.cn
2023-02-13wifi: rtw88: mac: Use existing macros in rtw_pwr_seq_parser()Martin Blumenstingl
Replace the magic numbers for the intf_mask with their existing RTW_PWR_INTF_PCI_MSK and RTW_PWR_INTF_USB_MSK macros to make the code easier to understand. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230204233001.1511643-5-martin.blumenstingl@googlemail.com
2023-02-13wifi: rtw88: Move enum rtw_tx_queue_type mapping code to tx.{c,h}Martin Blumenstingl
This code is not specific to the PCIe bus type but can be re-used by USB and SDIO bus types. Move it to tx.{c,h} to avoid code-duplication in the future. While here, add checking of the ac argument in rtw_tx_ac_to_hwq() so we're not accessing entries beyond the end of the array. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230204233001.1511643-4-martin.blumenstingl@googlemail.com
2023-02-13wifi: rtw88: pci: Change queue datatype to enum rtw_tx_queue_typeMartin Blumenstingl
This makes it easier to understand which values are allowed for the "queue" variable when using the enum instead of an u8. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230204233001.1511643-3-martin.blumenstingl@googlemail.com
2023-02-13wifi: rtw88: pci: Use enum type for rtw_hw_queue_mapping() and ac_to_hwqMartin Blumenstingl
rtw_hw_queue_mapping() and ac_to_hwq[] hold values of type enum rtw_tx_queue_type. Change their types to reflect this to make it easier to understand this part of the code. While here, also change the array to be static const as it is not supposed to be modified at runtime. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230204233001.1511643-2-martin.blumenstingl@googlemail.com
2023-02-13wifi: wl1251: Fix a typo ("boradcast")Jonathan Neuschäfer
It should be "broadcast". Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230129124919.1305057-1-j.neuschaefer@gmx.net
2023-02-13wifi: libertas: add support for WPS enrollee IE in probe requestsDoug Brown
Add compatibility with WPS by passing on WPS enrollee information in probe requests. Ignore other IEs supplied in the scan request. This also has the added benefit of restoring compatibility with newer wpa_supplicant versions that always add scan IEs. Previously, with max_scan_ie_len set to 0, scans would always fail. Suggested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Doug Brown <doug@schmorgal.com> Reviewed-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123053132.30710-5-doug@schmorgal.com
2023-02-13wifi: libertas: add new TLV type for WPS enrollee IEDoug Brown
Add a define for the TLV type that will be used to add WPS enrollee information to probe requests. Suggested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Doug Brown <doug@schmorgal.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123053132.30710-4-doug@schmorgal.com