summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-01-09vfio/ccw: replace copy_from_iova with vfio_dma_rwEric Farman
It was suggested [1] that we replace the old copy_from_iova() routine (which pins a page, does a memcpy, and unpins the page) with the newer vfio_dma_rw() interface. This has a modest improvement in the overall time spent through the fsm_io_request() path, and simplifies some of the code to boot. [1] https://lore.kernel.org/r/20220706170553.GK693670@nvidia.com/ Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09vfio/ccw: move where IDA flag is set in ORBEric Farman
The output of vfio_ccw is always a Format-2 IDAL, but the code that explicitly sets this is buried in cp_init(). In fact the input is often already a Format-2 IDAL, and would be rejected (via the check in ccwchain_calc_length()) if it weren't, so explicitly setting it doesn't do much. Setting it way down here only makes it impossible to make decisions in support of other IDAL formats. Let's move that to where the rest of the ORB is set up, so that the CCW processing in cp_prefetch() is performed according to the contents of the unmodified guest ORB. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09vfio/ccw: allow non-zero storage keysEric Farman
Currently, vfio-ccw copies the ORB from the io_region to the channel_program struct being built. It then adjusts various pieces of that ORB to the values needed to be used by the SSCH issued by vfio-ccw in the host. This includes setting the subchannel key to the default, presumably because Linux doesn't do anything with non-zero storage keys itself. But it seems wrong to convert every I/O to the default key if the guest itself requested a non-zero subchannel (access) key. Any channel program that sets a non-zero key would expect the same key returned in the SCSW of the IRB, not zero, so best to allow that to occur unimpeded. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09vfio/ccw: simplify the cp_get_orb interfaceEric Farman
There's no need to send in both the address of the subchannel struct, and an element within it, to populate the ORB. Pass the whole pointer and let cp_get_orb() take the pieces that are needed. Suggested-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09vfio/ccw: cleanup some of the mdev commentaryEric Farman
There is no longer an mdev struct accessible via a channel program struct, but there are some artifacts remaining that mention it. Clean them up. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: add special output handling when oops_in_progress is setSven Schnelle
Normally a user can scroll back with PF7/PF8 if printed messages are outside of the visible screen area. This doesn't work when the kernel crashes, because the scrollback handling is done by the kernel, which is no longer alive after the kernel crash. Add code to always print all dirty lines in the screen buffer, so the user can scroll back with the terminal scrollback keys (Page Up/Down). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: set SBA and RA addresses when converting linesSven Schnelle
Now that lines are converted during output, the RA and SBA no longer need to get updated as an additional step. Instead set them when converting the line. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: simplify update flagsSven Schnelle
Make TTY3270_UPDATE_ALL the sum of all TTY3270_* flags, so we don't need any special handling for it. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: return from notifier when activate view failsSven Schnelle
When activating the view fails (in this case because the 3270 is disconnected) return from the notifer callback. Otherwise the system will deadlock. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/diag: use __packed __alignedSven Schnelle
Use __packed __aligned instead of __attribute__((packed, aligned(X))); to match the rest of the file. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/fs3270: split header filesSven Schnelle
In order to use the fs3270 one would need at least the ioctl definitions in uapi. Add two new include files in uapi, which contain: fs3270: ioctl number declarations + returned struct for TUBGETMOD. raw3270: all the orders, attributes and similar stuff used with 3270 terminals. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/fs3270: fix screen reset on activateSven Schnelle
fs3270 uses EWRITEA to clear the screen when a user opens /dev/3270/tub. However it misses the attribute byte after the EWRITEA, so (at least) x3270 complains about 'Record too short, missing write flags'. Add the missing flag byte to fix this. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/fs3270: fix function prototypesSven Schnelle
fix function prototypes split over two lines like: static void foobar(void) Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/fs3270: use *ptr instead of struct in kzallocSven Schnelle
Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/fs3270: remove duplicate assignmentSven Schnelle
remove a duplicate assignment reported by checkpatch. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/fs3270: add missing braces to if/elseSven Schnelle
Fix a few missing braces and wrong placement of braces reported by checkpatch. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/fs3270: fix whitespace errorsSven Schnelle
Fix a few whitespace errors reported by checkpatch, namely superfluous whitespace, missing spaces and empty lines. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/raw3270: fix nullpointer checkSven Schnelle
Fix the following checkpatch warning: CHECK: Comparison to NULL could be written "!rp" + if (rp == NULL) Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/raw3270: split up raw3270_activate_view()Sven Schnelle
move the core processing to __raw3270_activate_view() to reduce the required if/else blocks and indentiion levels. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/raw3270: remove BUG_ON in raw3270_request_reset()Sven Schnelle
WARN_ON_ONCE if list is not empty, and return an error code instead. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/raw3270: use DEVICE_ATTR_RO() for sysfs attributesSven Schnelle
Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/raw3270: add comment to spinlock memberSven Schnelle
Add a small comment to the lock member of struct raw3270_view to make checkpatch happy. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/raw3270: fix raw3270 declarationsSven Schnelle
checkpatch complains about missing argument names in function declarations. Fix it. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/raw3270: fix indentation/whitespace errorsSven Schnelle
Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/raw3270: move EXPORT_SYMBOL() next to functionsSven Schnelle
Fixes a few checkpatch warning about EXPORT_SYMBOL being at the end of the file instead of being next to the functions. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: fix minor checkpatch issuesSven Schnelle
Fix remaining checkpatch issues, like misplaced brackets, whitespace and similar things. No functional change. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: use msecs_to_jiffies()Sven Schnelle
Use msecs_to_jiffies() instead of HZ/10. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: fix multiple assignments in one lineSven Schnelle
fix the following and similar checkpatch warnings: CHECK: multiple assignments should be avoided + tp->cx = tp->saved_cx = 0; Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: fix camelcase in enum membersSven Schnelle
fix the following and similar checkpatch warnings: CHECK: Avoid CamelCase: <ESnormal> + enum { ESnormal, ESesc, ESsquare, ESparen, ESgetpars }; Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: add key help to status areaSven Schnelle
To let the user know about function key bindings, print them next to the Running/History field at the lower right of the screen. Also print the scrollback position. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: reduce highlight width to 3 bitsSven Schnelle
With the previous change this reduces the size of struct tty3270_attribute from four to two bytes. As we have this struct allocated for each character cell, this saves quite some memory. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: reduce f_color and b_color attribute size to 4 bitSven Schnelle
As we're only supportign 8 colors, we don't need 8 bits. Reduce the size to 4 bits to save memory. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: rewrite command line recallingSven Schnelle
Command line recalling is the last user of the 3270 custom malloc() like allocator. Remove this dependency by using a statically allocated buffer for the saved command lines, and also remove the allocator. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/tty3270: use normal char buffer for prompt/inputSven Schnelle
Preparation patch to allow removing the custom 3270 memory allocator. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/tty3270: convert lines during outputSven Schnelle
The length of the screen line is variable with the 3270 protocol. For each attribute (foreground, background color, highlighting etc) we need 3 bytes: the set attribute order, the attribute number, and the value of the attribute. This means that depending on screen content, we might end up 3*3 bytes addtional data for a single character. Allocating the maximum possible amount of memory is quite a lot, and we cannot easily extend the lines by allocating memory because we might get called from atomic context. Failing to extend the memory would also be bad as that would mean that we could miss kernel messages in oom conditions. Therefore move the conversion to a 3270 datastream to tty3270_update(), and use only single line buffer. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: generate status line during outputSven Schnelle
Updating the status line is almost the same as generating it when redrawing the screen. However, the code is much easier to read when doing so. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/tty3270: add 3270 datastream helpersSven Schnelle
There are lots of places adding attributes or orders to the datastream. Add a few helpers to make that code shorter and easier to read. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/tty3270: move ASCII->EBCDIC conversion to convert_line()Sven Schnelle
Instead of always converting the character set, only convert them when the line is really displayed. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: move tty3270_convert_line()Sven Schnelle
To make the upcoming patches easier to read, move tty3270_convert_line() before changing code. No functional change. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/raw3270: make raw3270_buffer_address() accept x/y coordinatesSven Schnelle
All callers of raw3270_buffer_address() are calculating the offset from some x/y coordinates. Move that calculation inside of the function, so user can pass the x/y values directly. Note that negative values are relative to the end-of-line or end-of-screen. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/tty3270: allocate screen with scrollbackSven Schnelle
No functional change (except more memory consumption), in preparation for the line buffer rework. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/con3270: add helper to get number of tty rowsSven Schnelle
There a quite a few places using 'tp->view.rows - 2'. Add a helper function for this. This will also be used when a function key help line will be added. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/tty3270: split up tty3270_convert_line()Sven Schnelle
To make the code easier to read, split up tty3270_convertline() into several subfunctions: - tty3270_resize_line() to realloc the line if it doesn't have enough space left - tty3270_required_length() to calculate how much space we need - tty3270_add_attributes() to add the color and highlight attributes - tty3270_add_reset_attributes() to reset the attributes at the end of the line Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/tty3270: resize terminal when the clear key is pressedSven Schnelle
There's no easy way to figure out whether the user has re-connected to the z/VM session. When the user re-connected with a different geometry to z/VM, the screen layout is broken. Allow the user to force a resizing by pressing the Clear Key. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/tty3270: move resize work to raw3270Sven Schnelle
This change was initially made to reduce code duplication when the con3270 and tty3270 shared the same resize code. It still makes sense to move the resize workqueue to raw3270 in case we add some other view later. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/raw3270: add raw3270_start_request() helperSven Schnelle
There are a few places (and there would be more with the following commits) like this: raw3270_request_reset(cp->kreset); raw3270_request_set_cmd(cp->kreset, TC_WRITE); raw3270_request_add_data(cp->kreset, &kreset_data, 1); raw3270_start(&cp->view, cp->kreset); i.e reset a request, setting the command, adding payload, and starting the request. Add a helper raw3270_start_request() which takes a command and the payload as argument and calls the approppriate functions. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/tty3270: add AID definesSven Schnelle
Use AID_* instead of hex numbers to make the code a bit easier to read. also convert the if/else blocks to a switch statement in tty3270_read_tasklet(). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/tty3270: ignore NUL charactersSven Schnelle
With 'TERM=vt220' zsh is sending several NUL characters with the prompt to the tty. Both xterm and the linux drm console seem to ignore them. Ignore them in tty3270 as well. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/tty3270: add support for VT100 graphics escapeSven Schnelle
Add support for ESC(B and ESC(0 to switch between character charset and graphics charset. Used in vt100 and later terminal generations. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09s390/tty3270: add support for graphic escapeSven Schnelle
Add support for ASCII S0/S1 to switch between character charset and graphic charset. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 11:47:50 +0000