summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-03staging: vt6656: Fix non zero logical return of, usb_control_msgMalcolm Priestley
Starting with commit 59608cb1de1856 ("staging: vt6656: clean function's error path in usbpipe.c") the usb control functions have returned errors throughout driver with only logical variable checking. However, usb_control_msg return the amount of bytes transferred this means that normal operation causes errors. Correct the return function so only return zero when transfer is successful. Cc: stable <stable@vger.kernel.org> # v5.3+ Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/08e88842-6f78-a2e3-a7a0-139fec960b2b@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-03riscv: ftrace: correct the condition logic in function graph tracerZong Li
The condition should be logical NOT to assign the hook address to parent address. Because the return value 0 of function_graph_enter upon success. Fixes: e949b6db51dc (riscv/function_graph: Simplify with function_graph_enter()) Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: stable@vger.kernel.org Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-03riscv: dts: Add DT support for SiFive L2 cache controllerYash Shah
Add the L2 cache controller DT node in SiFive FU540 soc-specific DT file Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-03riscv: gcov: enable gcov for RISC-VZong Li
This patch enables GCOV code coverage measurement on RISC-V. Lightly tested on QEMU and Hifive Unleashed board, seems to work as expected. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-03riscv: mm: use __pa_symbol for kernel symbolsZong Li
__pa_symbol is the marcro that should be used for kernel symbols. It is also a pre-requisite for DEBUG_VIRTUAL which will do bounds checking. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2020-01-03agp: remove unused variable arqsz in agp_3_5_enable()Yunfeng Ye
This patch fix the following warning: drivers/char/agp/isoch.c: In function ‘agp_3_5_enable’: drivers/char/agp/isoch.c:322:13: warning: variable ‘arqsz’ set but not used [-Wunused-but-set-variable] u32 isoch, arqsz; ^~~~~ Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-03agp: remove unused variable mcapndxYunfeng Ye
This patch fix the following warning: drivers/char/agp/isoch.c: In function ‘agp_3_5_isochronous_node_enable’: drivers/char/agp/isoch.c:87:5: warning: variable ‘mcapndx’ set but not used [-Wunused-but-set-variable] u8 mcapndx; ^~~~~~~ Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-02ftrace: Avoid potential division by zero in function profilerWen Yang
The ftrace_profile->counter is unsigned long and do_div truncates it to 32 bits, which means it can test non-zero and be truncated to zero for division. Fix this issue by using div64_ul() instead. Link: http://lkml.kernel.org/r/20200103030248.14516-1-wenyang@linux.alibaba.com Cc: stable@vger.kernel.org Fixes: e330b3bcd8319 ("tracing: Show sample std dev in function profiling") Fixes: 34886c8bc590f ("tracing: add average time in function to function profiler") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-02tracing: Have stack tracer compile when MCOUNT_INSN_SIZE is not definedSteven Rostedt (VMware)
On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and this makes the stack tracer fail to compile. Just define it to zero in this case. Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com Cc: stable@vger.kernel.org Fixes: 4df297129f622 ("tracing: Remove most or all of stack tracer stack size from stack_max_size") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-02tracing: Define MCOUNT_INSN_SIZE when not defined without direct callsSteven Rostedt (VMware)
In order to handle direct calls along side of function graph tracer, a check is made to see if the address being traced by the function graph tracer is a direct call or not. To get the address used by direct callers, the return address is subtracted by MCOUNT_INSN_SIZE. For some archs with certain configurations, MCOUNT_INSN_SIZE is undefined here. But these should not be using direct calls anyway. Just define MCOUNT_INSN_SIZE to zero in this case. Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com Reported-by: kbuild test robot <lkp@intel.com> Fixes: ff205766dbbee ("ftrace: Fix function_graph tracer interaction with BPF trampoline") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-02net: Update GIT url in maintainers.David S. Miller
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02Merge tag 'sizeof_field-v5.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull final sizeof_field conversion from Kees Cook: "Remove now unused FIELD_SIZEOF() macro (Kees Cook)" * tag 'sizeof_field-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kernel.h: Remove unused FIELD_SIZEOF()
2020-01-03spi: Document Octal mode as valid SPI bus widthVignesh Raghavendra
SPI core supports Octal SPI controllers which have 8 IO lines. Therefore document 8 as a valid option for spi-tx{rx}-bus-width Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200102102118.23318-1-vigneshr@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-03spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent callswuxu.wu
dw_spi_irq() and dw_spi_transfer_one concurrent calls. I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null, dw->len==4, and dw->tx_end==1. When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one may concurrent visit dw_spi, so I think dw_spi structure lack of protection. Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq, store dw rx/tx instructions and other cores handle irq load dw rx/tx instructions may out of order. [ 1025.321302] Call trace: ... [ 1025.321319] __crash_kexec+0x98/0x148 [ 1025.321323] panic+0x17c/0x314 [ 1025.321329] die+0x29c/0x2e8 [ 1025.321334] die_kernel_fault+0x68/0x78 [ 1025.321337] __do_kernel_fault+0x90/0xb0 [ 1025.321346] do_page_fault+0x88/0x500 [ 1025.321347] do_translation_fault+0xa8/0xb8 [ 1025.321349] do_mem_abort+0x68/0x118 [ 1025.321351] el1_da+0x20/0x8c [ 1025.321362] dw_writer+0xc8/0xd0 [ 1025.321364] interrupt_transfer+0x60/0x110 [ 1025.321365] dw_spi_irq+0x48/0x70 ... Signed-off-by: wuxu.wu <wuxu.wu@huawei.com> Link: https://lore.kernel.org/r/1577849981-31489-1-git-send-email-wuxu.wu@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-03regulator: bd70528: Remove .set_ramp_delay for bd70528_ldo_opsAxel Lin
The .set_ramp_delay should be for bd70528_buck_ops only. Setting .set_ramp_delay for for bd70528_ldo_ops causes problem because BD70528_MASK_BUCK_RAMP (0x10) overlaps with BD70528_MASK_LDO_VOLT (0x1f). So setting ramp_delay for LDOs may change the voltage output, fix it. Fixes: 99ea37bd1e7d ("regulator: bd70528: Support ROHM BD70528 regulator block") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/20200101022406.15176-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-03ASoC: Intel: boards: Fix compile-testing RT1011/RT5682Arnd Bergmann
On non-x86, the new driver results in a build failure: sound/soc/intel/boards/cml_rt1011_rt5682.c:14:10: fatal error: asm/cpu_device_id.h: No such file or directory The asm/cpu_device_id.h header is not actually needed here, so don't include it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200102135322.1841053-1-arnd@arndb.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-02Merge tag 'gcc-plugins-v5.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc-plugins fix from Kees Cook: "Build flexibility fix: allow builds to disable plugins even when plugins available (Arnd Bergmann)" * tag 'gcc-plugins-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: make it possible to disable CONFIG_GCC_PLUGINS again
2020-01-02Merge tag 'seccomp-v5.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fixes from Kees Cook: "Fixes for seccomp_notify_ioctl uapi sanity from Sargun Dhillon. The bulk of this is fixing the surrounding samples and selftests so that seccomp can correctly validate the seccomp_notify_ioctl buffer as being initially zeroed. Summary: - Fix samples and selftests to zero passed-in buffer - Enforce zeroed buffer checking - Verify buffer sanity check in selftest" * tag 'seccomp-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECV seccomp: Check that seccomp_notif is zeroed out by the user selftests/seccomp: Zero out seccomp_notif samples/seccomp: Zero out members based on seccomp_notif_sizes
2020-01-02MIPS: Avoid VDSO ABI breakage due to global register variablePaul Burton
Declaring __current_thread_info as a global register variable has the effect of preventing GCC from saving & restoring its value in cases where the ABI would typically do so. To quote GCC documentation: > If the register is a call-saved register, call ABI is affected: the > register will not be restored in function epilogue sequences after the > variable has been assigned. Therefore, functions cannot safely return > to callers that assume standard ABI. When our position independent VDSO is built for the n32 or n64 ABIs all functions it exposes should be preserving the value of $gp/$28 for their caller, but in the presence of the __current_thread_info global register variable GCC stops doing so & simply clobbers $gp/$28 when calculating the address of the GOT. In cases where the VDSO returns success this problem will typically be masked by the caller in libc returning & restoring $gp/$28 itself, but that is by no means guaranteed. In cases where the VDSO returns an error libc will typically contain a fallback path which will now fail (typically with a bad memory access) if it attempts anything which relies upon the value of $gp/$28 - eg. accessing anything via the GOT. One fix for this would be to move the declaration of __current_thread_info inside the current_thread_info() function, demoting it from global register variable to local register variable & avoiding inadvertently creating a non-standard calling ABI for the VDSO. Unfortunately this causes issues for clang, which doesn't support local register variables as pointed out by commit fe92da0f355e ("MIPS: Changed current_thread_info() to an equivalent supported by both clang and GCC") which introduced the global register variable before we had a VDSO to worry about. Instead, fix this by continuing to use the global register variable for the kernel proper but declare __current_thread_info as a simple extern variable when building the VDSO. It should never be referenced, and will cause a link error if it is. This resolves the calling convention issue for the VDSO without having any impact upon the build of the kernel itself for either clang or gcc. Signed-off-by: Paul Burton <paulburton@kernel.org> Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christian Brauner <christian.brauner@canonical.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: <stable@vger.kernel.org> # v4.4+ Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2020-01-02Merge tag 'linux-can-fixes-for-5.5-20200102' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-01-02 this is a pull request of 9 patches for net/master. The first 5 patches target all the tcan4x5x driver. The first 3 patches of them are by Dan Murphy and Sean Nyekjaer and improve the device initialization (power on, reset and get device out of standby before register access). The next patch is by Dan Murphy and disables the INH pin device-state if the GPIO is unavailable. The last patch for the tcan4x5x driver is by Gustavo A. R. Silva and fixes an inconsistent PTR_ERR check in the tcan4x5x_parse_config() function. The next patch is by Oliver Hartkopp and targets the generic CAN device infrastructure. It ensures that an initialized headroom in outgoing CAN sk_buffs (e.g. if injected by AF_PACKET). The last 2 patches are by Johan Hovold and fix the kvaser_usb and gs_usb drivers by always using the current alternate setting not blindly the first one. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02Merge tag 'pstore-v5.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore bug fixes from Kees Cook: - always reset circular buffer state when writing new dump (Aleksandr Yashkin) - fix rare error-path memory leak (Kees Cook) * tag 'pstore-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Write new dumps to start of recycled zones pstore/ram: Fix error-path memory leak in persistent_ram_new() callers
2020-01-02net: freescale: fec: Fix ethtool -d runtime PMAndrew Lunn
In order to dump the FECs registers the clocks have to be ticking, otherwise a data abort occurs. Add calls to runtime PM so they are enabled and later disabled. Fixes: e8fcfcd5684a ("net: fec: optimize the clock management to save power") Reported-by: Chris Healy <Chris.Healy@zii.aero> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02vxlan: fix tos value before xmitHangbin Liu
Before ip_tunnel_ecn_encap() and udp_tunnel_xmit_skb() we should filter tos value by RT_TOS() instead of using config tos directly. vxlan_get_route() would filter the tos to fl4.flowi4_tos but we didn't return it back, as geneve_get_v4_rt() did. So we have to use RT_TOS() directly in function ip_tunnel_ecn_encap(). Fixes: 206aaafcd279 ("VXLAN: Use IP Tunnels tunnel ENC encap API") Fixes: 1400615d64cf ("vxlan: allow setting ipv6 traffic class") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02sch_cake: avoid possible divide by zero in cake_enqueue()Wen Yang
The variables 'window_interval' is u64 and do_div() truncates it to 32 bits, which means it can test non-zero and be truncated to zero for division. The unit of window_interval is nanoseconds, so its lower 32-bit is relatively easy to exceed. Fix this issue by using div64_u64() instead. Fixes: 7298de9cd725 ("sch_cake: Add ingress mode") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: cake@lists.bufferbloat.net Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02Revert "fs: remove ksys_dup()"Dominik Brodowski
This reverts commit 8243186f0cc7 ("fs: remove ksys_dup()") and the subsequent fix for it in commit 2d3145f8d280 ("early init: fix error handling when opening /dev/console"). Trying to use filp_open() and f_dupfd() instead of pseudo-syscalls caused more trouble than what is worth it: it requires accessing vfs internals and it turns out there were other bugs in it too. In particular, the file reference counting was wrong - because unlike the original "open+2*dup" sequence it used "filp_open+3*f_dupfd" and thus had an extra leaked file reference. That in turn then caused odd problems with Androidx86 long after boot becaue of how the extra reference to the console kept the session active even after all file descriptors had been closed. Reported-by: youling 257 <youling257@gmail.com> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-02net: Correct type of tcp_syncookies sysctl.David S. Miller
It can take on the values of '0', '1', and '2' and thus is not a boolean. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02tracing: Initialize val to zero in parse_entry of inject codeSteven Rostedt (VMware)
gcc produces a variable may be uninitialized warning for "val" in parse_entry(). This is really a false positive, but the code is subtle enough to just initialize val to zero and it's not a fast path to worry about it. Marked for stable to remove the warning in the stable trees as well. Cc: stable@vger.kernel.org Fixes: 6c3edaf9fd6a3 ("tracing: Introduce trace event injection") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-02tcp: fix "old stuff" D-SACK causing SACK to be treated as D-SACKPengcheng Yang
When we receive a D-SACK, where the sequence number satisfies: undo_marker <= start_seq < end_seq <= prior_snd_una we consider this is a valid D-SACK and tcp_is_sackblock_valid() returns true, then this D-SACK is discarded as "old stuff", but the variable first_sack_index is not marked as negative in tcp_sacktag_write_queue(). If this D-SACK also carries a SACK that needs to be processed (for example, the previous SACK segment was lost), this SACK will be treated as a D-SACK in the following processing of tcp_sacktag_write_queue(), which will eventually lead to incorrect updates of undo_retrans and reordering. Fixes: fd6dad616d4f ("[TCP]: Earlier SACK block verification & simplify access to them") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02net: dsa: mv88e6xxx: force cmode write on 6141/6341Baruch Siach
mv88e6xxx_port_set_cmode() relies on cmode stored in struct mv88e6xxx_port to skip cmode update when the requested value matches the cached value. It turns out that mv88e6xxx_port_hidden_write() might change the port cmode setting as a side effect, so we can't rely on the cached value to determine that cmode update in not necessary. Force cmode update in mv88e6341_port_set_cmode(), to make serdes configuration work again. Other mv88e6xxx_port_set_cmode() callers keep the current behaviour. This fixes serdes configuration of the 6141 switch on SolidRun Clearfog GT-8K. Fixes: 7a3007d22e8 ("net: dsa: mv88e6xxx: fully support SERDES on Topaz family") Reported-by: Denis Odintsov <d.odintsov@traviangames.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02gcc-plugins: make it possible to disable CONFIG_GCC_PLUGINS againArnd Bergmann
I noticed that randconfig builds with gcc no longer produce a lot of ccache hits, unlike with clang, and traced this back to plugins now being enabled unconditionally if they are supported. I am now working around this by adding export CCACHE_COMPILERCHECK=/usr/bin/size -A %compiler% to my top-level Makefile. This changes the heuristic that ccache uses to determine whether the plugins are the same after a 'make clean'. However, it also seems that being able to just turn off the plugins is generally useful, at least for build testing it adds noticeable overhead but does not find a lot of bugs additional bugs, and may be easier for ccache users than my workaround. Fixes: 9f671e58159a ("security: Create "kernel hardening" config area") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20191211133951.401933-1-arnd@arndb.de Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2020-01-02selftests/seccomp: Catch garbage on SECCOMP_IOCTL_NOTIF_RECVSargun Dhillon
This adds logic to the user_notification_basic test to set a member of struct seccomp_notif to an invalid value to ensure that the kernel returns EINVAL if any of the struct seccomp_notif members are set to invalid values. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20191230203811.4996-1-sargun@sargun.me Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2020-01-02seccomp: Check that seccomp_notif is zeroed out by the userSargun Dhillon
This patch is a small change in enforcement of the uapi for SECCOMP_IOCTL_NOTIF_RECV ioctl. Specifically, the datastructure which is passed (seccomp_notif) must be zeroed out. Previously any of its members could be set to nonsense values, and we would ignore it. This ensures all fields are set to their zero value. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Aleksa Sarai <cyphar@cyphar.com> Acked-by: Tycho Andersen <tycho@tycho.ws> Link: https://lore.kernel.org/r/20191229062451.9467-2-sargun@sargun.me Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2020-01-02selftests/seccomp: Zero out seccomp_notifSargun Dhillon
The seccomp_notif structure should be zeroed out prior to calling the SECCOMP_IOCTL_NOTIF_RECV ioctl. Previously, the kernel did not check whether these structures were zeroed out or not, so these worked. This patch zeroes out the seccomp_notif data structure prior to calling the ioctl. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/20191229062451.9467-1-sargun@sargun.me Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2020-01-02samples/seccomp: Zero out members based on seccomp_notif_sizesSargun Dhillon
The sizes by which seccomp_notif and seccomp_notif_resp are allocated are based on the SECCOMP_GET_NOTIF_SIZES ioctl. This allows for graceful extension of these datastructures. If userspace zeroes out the datastructure based on its version, and it is lagging behind the kernel's version, it will end up sending trailing garbage. On the other hand, if it is ahead of the kernel version, it will write extra zero space, and potentially cause corruption. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Suggested-by: Tycho Andersen <tycho@tycho.ws> Link: https://lore.kernel.org/r/20191230203503.4925-1-sargun@sargun.me Fixes: fec7b6690541 ("samples: add an example of seccomp user trap") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2020-01-02pstore/ram: Write new dumps to start of recycled zonesAleksandr Yashkin
The ram_core.c routines treat przs as circular buffers. When writing a new crash dump, the old buffer needs to be cleared so that the new dump doesn't end up in the wrong place (i.e. at the end). The solution to this problem is to reset the circular buffer state before writing a new Oops dump. Signed-off-by: Aleksandr Yashkin <a.yashkin@inango-systems.com> Signed-off-by: Nikolay Merinov <n.merinov@inango-systems.com> Signed-off-by: Ariel Gilman <a.gilman@inango-systems.com> Link: https://lore.kernel.org/r/20191223133816.28155-1-n.merinov@inango-systems.com Fixes: 896fc1f0c4c6 ("pstore/ram: Switch to persistent_ram routines") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org>
2020-01-02pstore/ram: Fix error-path memory leak in persistent_ram_new() callersKees Cook
For callers that allocated a label for persistent_ram_new(), if the call fails, they must clean up the allocation. Suggested-by: Navid Emamdoost <navid.emamdoost@gmail.com> Fixes: 1227daa43bce ("pstore/ram: Clarify resource reservation labels") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/lkml/20191211191353.14385-1-navid.emamdoost@gmail.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-01-02USB-PD tcpm: bad warning+size, PPS adaptersDouglas Gilbert
Augmented Power Delivery Objects (A)PDO_s are used by USB-C PD power adapters to advertize the voltages and currents they support. There can be up to 7 PDO_s but before PPS (programmable power supply) there were seldom more than 4 or 5. Recently Samsung released an optional PPS 45 Watt power adapter (EP-TA485) that has 7 PDO_s. It is for the Galaxy 10+ tablet and charges it quicker than the adapter supplied at purchase. The EP-TA485 causes an overzealous WARN_ON to soil the log plus it miscalculates the number of bytes to read. So this bug has been there for some time but goes undetected for the majority of USB-C PD power adapters on the market today that have 6 or less PDO_s. That may soon change as more USB-C PD adapters with PPS come to market. Tested on a EP-TA485 and an older Lenovo PN: SA10M13950 USB-C 65 Watt adapter (without PPS and has 4 PDO_s) plus several other PD power adapters. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191230033544.1809-1-dgilbert@interlog.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-02can: mscan: mscan_rx_poll(): fix rx path lockup when returning from polling ↵Florian Faber
to irq mode Under load, the RX side of the mscan driver can get stuck while TX still works. Restarting the interface locks up the system. This behaviour could be reproduced reliably on a MPC5121e based system. The patch fixes the return value of the NAPI polling function (should be the number of processed packets, not constant 1) and the condition under which IRQs are enabled again after polling is finished. With this patch, no more lockups were observed over a test period of ten days. Fixes: afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by: Florian Faber <faber@faberman.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: gs_usb: gs_usb_probe(): use descriptors of current altsettingJohan Hovold
Make sure to always use the descriptors of the current alternate setting to avoid future issues when accessing fields that may differ between settings. Signed-off-by: Johan Hovold <johan@kernel.org> Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: kvaser_usb: fix interface sanity checkJohan Hovold
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jimmy Assarsson <extja@kvaser.com> Cc: Christer Beskow <chbe@kvaser.com> Cc: Nicklas Johansson <extnj@kvaser.com> Cc: Martin Henriksson <mh@kvaser.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: can_dropped_invalid_skb(): ensure an initialized headroom in outgoing ↵Oliver Hartkopp
CAN sk_buffs KMSAN sysbot detected a read access to an untinitialized value in the headroom of an outgoing CAN related sk_buff. When using CAN sockets this area is filled appropriately - but when using a packet socket this initialization is missing. The problematic read access occurs in the CAN receive path which can only be triggered when the sk_buff is sent through a (virtual) CAN interface. So we check in the sending path whether we need to perform the missing initializations. Fixes: d3b58c47d330d ("can: replace timestamp as unique skb attribute") Reported-by: syzbot+b02ff0707a97e4e79ebb@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> # >= v4.1 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_parse_config(): fix inconsistent IS_ERR and PTR_ERRGustavo A. R. Silva
Fix inconsistent IS_ERR and PTR_ERR in tcan4x5x_parse_config(). The proper pointer to be passed as argument is tcan4x5x->device_wake_gpio. This bug was detected with the help of Coccinelle. Fixes: 2de497356955 ("can: tcan45x: Make wake-up GPIO an optional GPIO") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_parse_config(): Disable the INH pin device-state ↵Dan Murphy
GPIO is unavailable If the device state GPIO is not connected to the host then disable the INH output from the TCAN device per section 8.3.5 of the data sheet. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_parse_config(): reset device before register accessSean Nyekjaer
It's a good idea to reset a ip-block/spi device before using it, this patch will reset the device. And a generic reset function if needed elsewhere. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_can_probe(): turn on the power before parsing the configDan Murphy
The tcan4x5x_parse_config() function now performs action on the device either reading or writing and a reset. If the devive has a switchable power supppy (i.e. regulator is managed) it needs to be turned on. So turn on the regulator if available. If the parsing fails, turn off the regulator. Fixes: 2de497356955 ("can: tcan45x: Make wake-up GPIO an optional GPIO") Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02can: tcan4x5x: tcan4x5x_can_probe(): get the device out of standby before ↵Sean Nyekjaer
register access The m_can tries to detect if Non ISO Operation is available while in standby mode, this function results in the following error: | tcan4x5x spi2.0 (unnamed net_device) (uninitialized): Failed to init module | tcan4x5x spi2.0: m_can device registered (irq=84, version=32) | tcan4x5x spi2.0 can2: TCAN4X5X successfully initialized. When the tcan device comes out of reset it goes in standby mode. The m_can driver tries to access the control register but fails due to the device being in standby mode. So this patch will put the tcan device in normal mode before the m_can driver does the initialization. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Cc: stable@vger.kernel.org Signed-off-by: Sean Nyekjaer <sean@geanix.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-01-02apparmor: only get a label reference if the fast path check failsJohn Johansen
The common fast path check can be done under rcu_read_lock() and doesn't need a reference count on the label. Only take a reference count if entering the slow path. Fixes reported hackbench regression - sha1 79e178a57dae ("Merge tag 'apparmor-pr-2019-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor") hackbench -l (256000/#grp) -g #grp 128 groups 19.679 ±0.90% - previous sha1 01d1dff64662 ("Merge tag 's390-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux") hackbench -l (256000/#grp) -g #grp 128 groups 3.1689 ±3.04% Reported-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-by: Vincent Guittot <vincent.guittot@linaro.org> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Fixes: bce4e7e9c45e ("apparmor: reduce rcu_read_lock scope for aa_file_perm mediation") Signed-off-by: John Johansen <john.johansen@canonical.com>
2020-01-02apparmor: fix bind mounts aborting with -ENOMEMPatrick Steinhardt
With commit df323337e507 ("apparmor: Use a memory pool instead per-CPU caches, 2019-05-03"), AppArmor code was converted to use memory pools. In that conversion, a bug snuck into the code that polices bind mounts that causes all bind mounts to fail with -ENOMEM, as we erroneously error out if `aa_get_buffer` returns a pointer instead of erroring out when it does _not_ return a valid pointer. Fix the issue by correctly checking for valid pointers returned by `aa_get_buffer` to fix bind mounts with AppArmor. Fixes: df323337e507 ("apparmor: Use a memory pool instead per-CPU caches") Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: John Johansen <john.johansen@canonical.com>
2020-01-02Merge tag 'usb-serial-5.5-rc5' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.5-rc5 Here's a couple of new modem device ids, including a new quirk for devices that expect zero-length packets. Due to the holidays, only the first one has been in linux-next and with no reported issues. Signed-off-by: Johan Hovold <johan@kernel.org> * tag 'usb-serial-5.5-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add ZLP support for 0x1bc7/0x9010 USB: serial: option: add Telit ME910G1 0x110a composition
2020-01-02Merge tag 'phy-for-5.5-rc' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 5.5-rc *) Fix error path in cpcap-usb driver when no host driver is loaded to avoid debug serial console from stop working *) Fix to let USB host idle before switching to UART mode in cpcap-usb driver in order to avoid flakey enumeration next time *) Prevent USB line glitches from waking up modem by enabling the USB lines (GPIO mux) after configuring the cpcap-usb PHY *) Improve host vs docked mode detection in cpcap-usb PHY driver to keep VBUS enabled in host mode *) Fix to prevent cpcap-usb PHY driver from enabling the PHY twice *) Increase PHY ready timeout in qcom-qmp PHY as it takes more than 1ms to initialize *) Round clock rate down to closest 1000 Hz in phy-rockchip-inno-hdmi to prevent wrong pixel clock to be used and result in no-signal when configuring a mode on RK3328 * tag 'phy-for-5.5-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy/rockchip: inno-hdmi: round clock rate down to closest 1000 Hz phy: cpcap-usb: Drop extra write to usb2 register phy: cpcap-usb: Improve host vs docked mode detection phy: cpcap-usb: Prevent USB line glitches from waking up modem phy: mapphone-mdm6600: Fix uninitialized status value regression phy: cpcap-usb: Fix flakey host idling and enumerating of devices phy: qcom-qmp: Increase PHY ready timeout phy: cpcap-usb: Fix error path when no host driver is loaded
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 22:08:36 +0000