| Age | Commit message (Collapse) | Author |
|---|
|
Commit:
8a58ddae2379 ("perf/core: Fix exclusive events' grouping")
allows CAP_EXCLUSIVE events to be grouped with other events. Since all
of those also happen to be AUX events (which is not the case the other
way around, because arch/s390), this changes the rules for stopping the
output: the AUX event may not be on its PMU's context any more, if it's
grouped with a HW event, in which case it will be on that HW event's
context instead. If that's the case, munmap() of the AUX buffer can't
find and stop the AUX event, potentially leaving the last reference with
the atomic context, which will then end up freeing the AUX buffer. This
will then trip warnings:
Fix this by using the context's PMU context when looking for events
to stop, instead of the event's PMU context.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20191022073940.61814-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Set gain in hx711_reset() to its default value after a reset cycle. This
omits one precautionary read cycle, because the read is performed in
hx711_set_gain_for_channel() anyway if gain has changed.
Check for DOUT low and if its high wait some time if it goes down
instead of doing a blind reset cycle when DOUT is not down.
This is a performance optimization which allows to query the sensor with
a higher frequency.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fix the following warnings when documentation is built:
drivers/iio/adc/stm32-adc-core.c:62: warning: cannot understand function
prototype: 'struct stm32_adc_common_regs '
drivers/iio/adc/stm32-adc-core.c:78: warning: cannot understand function
prototype: 'struct stm32_adc_priv_cfg '
drivers/iio/adc/stm32-adc-core.c:123: warning: Function parameter or
member 'pdev' not described in 'stm32f4_adc_clk_sel'
drivers/iio/adc/stm32-adc.c:219: warning: cannot understand function
prototype: 'struct stm32_adc_regs '
drivers/iio/adc/stm32-adc.c:237: warning: cannot understand function
prototype: 'struct stm32_adc_regspec '
drivers/iio/adc/stm32-adc.c:264: warning: cannot understand function
prototype: 'struct stm32_adc_cfg '
drivers/iio/adc/stm32-adc.c:323: warning: Function parameter or member
'difsel' not described in 'N'
drivers/iio/adc/stm32-adc.c:323: warning: Function parameter or member
'pcsel' not described in 'stm32_adc'
drivers/iio/adc/stm32-adc.c:371: warning: cannot understand function
prototype: 'const struct stm32_adc_regs stm32f4_sq[STM32_ADC_MAX_SQ + 1]
drivers/iio/adc/stm32-adc.c:417: warning: cannot understand function
prototype: 'const struct stm32_adc_regs stm32f4_smp_bits[] = '
drivers/iio/adc/stm32-adc.c:508: warning: cannot understand function
prototype: 'const struct stm32_adc_regs stm32h7_smp_bits[] = '
drivers/iio/adc/stm32-adc.c:1112: warning: Function parameter or member
'indio_dev' not described in 'stm32_adc_get_trig_extsel'
drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
'indio_dev' not described in 'stm32_adc_debugfs_reg_access'
drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
'reg' not described in 'stm32_adc_debugfs_reg_access'
drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
'writeval' not described in 'stm32_adc_debugfs_reg_access'
drivers/iio/adc/stm32-adc.c:1420: warning: Function parameter or member
'readval' not described in 'stm32_adc_debugfs_reg_access'
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.
The iio_triggered_buffer_postenable() should be called before (to attach
the poll func) and then the
The iio_triggered_buffer_predisable() function is hooked directly without
anything, which is probably fine, as the postenable() version seems to also
do some reset/wake-up of the device.
This will mean it will be easier when removing it; i.e. it just gets
removed.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Suggested by coccinelle / coccicheck.
CHECK drivers/iio/chemical/sgp30.c
drivers/iio/chemical/sgp30.c:486:2-3: Unneeded semicolon
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andreas Brauchli <a.brauchli@elementarea.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
PPC KVM fix for 5.4
- Fix a bug in the XIVE code which can cause a host crash.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm fixes for 5.4, take #2
Special PMU edition:
- Fix cycle counter truncation
- Fix cycle counter overflow limit on pure 64bit system
- Allow chained events to be actually functional
- Correct sample period after overflow
|
|
After resetting the vCPU, the kvmclock MSR keeps the previous value but it is
not enabled. This can be confusing, so fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use BUG_ON instead of a if condition followed by BUG.
Generated by: scripts/coccinelle/misc/bugon.cocci
Fixes: 4b526de50e39 ("KVM: x86: Check kvm_rebooting in kvm_spurious_fault()")
CC: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit bf653b78f960 ("KVM: vmx: Introduce handle_unexpected_vmexit
and handle WAITPKG vmexit") introduced specialized handling of
specific exit-reasons that should not be raised by CPU because
KVM configures VMCS such that they should never be raised.
However, since commit 7396d337cfad ("KVM: x86: Return to userspace
with internal error on unexpected exit reason"), VMX & SVM
exit handlers were modified to generically handle all unexpected
exit-reasons by returning to userspace with internal error.
Therefore, there is no need for specialized handling of specific
unexpected exit-reasons (This specialized handling also introduced
inconsistency for these exit-reasons to silently skip guest instruction
instead of return to userspace on internal-error).
Fixes: bf653b78f960 ("KVM: vmx: Introduce handle_unexpected_vmexit and handle WAITPKG vmexit")
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 204c91eff798a ("KVM: selftests: do not blindly clobber registers in
guest asm") was intended to make test more gcc-proof, however, the result
is exactly the opposite: on newer gccs (e.g. 8.2.1) the test breaks with
==== Test Assertion Failure ====
x86_64/sync_regs_test.c:168: run->s.regs.regs.rbx == 0xBAD1DEA + 1
pid=14170 tid=14170 - Invalid argument
1 0x00000000004015b3: main at sync_regs_test.c:166 (discriminator 6)
2 0x00007f413fb66412: ?? ??:0
3 0x000000000040191d: _start at ??:?
rbx sync regs value incorrect 0x1.
Apparently, compile is still free to play games with registers even
when they have variables attached.
Re-write guest code with 'asm volatile' by embedding ucall there and
making sure rbx is preserved.
Fixes: 204c91eff798a ("KVM: selftests: do not blindly clobber registers in guest asm")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vmx_dirty_log_test fails on AMD and this is no surprise as it is VMX
specific. Bail early when nested VMX is unsupported.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vmx_* tests require VMX and three of them implement the same check. Move it
to vmx library.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vmx_set_nested_state_test() checks if VMX is supported twice: in the very
beginning (and skips the whole test if it's not) and before doing
test_vmx_nested_state(). One should be enough.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Don't waste cycles to shrink/grow vCPU halt_poll_ns if host
side polling is disabled.
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Because "Untracked files:" are annoying.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When the RDPID instruction is supported on the host, enumerate it in
KVM_GET_SUPPORTED_CPUID.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here is a bunch of pin control fixes. I was lagging behind on this
one, some fixes should have come in earlier, sorry about that.
Anyways here it is, pretty straight-forward fixes, the Strago fix
stand out as something serious affecting a lot of machines.
Summary:
- Handle multiple instances of Intel chips without complaining.
- Restore the Intel Strago DMI workaround
- Make the Armada 37xx handle pins over 32
- Fix the polarity of the LED group on Armada 37xx
- Fix an off-by-one bug in the NS2 driver
- Fix error path for iproc's platform_get_irq()
- Fix error path on the STMFX driver
- Fix a typo in the Berlin AS370 driver
- Fix up misc errors in the Aspeed 2600 BMC support
- Fix a stray SPDX tag"
* tag 'pinctrl-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groups
pinctrl: aspeed-g6: Fix UART13 group pinmux
pinctrl: aspeed-g6: Make SIG_DESC_CLEAR() behave intuitively
pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configuration
pinctrl: aspeed-g6: Fix I2C14 SDA description
pinctrl: aspeed-g6: Sort pins for sanity
dt-bindings: pinctrl: aspeed-g6: Rework SD3 function and groups
pinctrl: berlin: as370: fix a typo s/spififib/spdifib
pinctrl: armada-37xx: swap polarity on LED group
pinctrl: stmfx: fix null pointer on remove
pinctrl: iproc: allow for error from platform_get_irq()
pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable()
pinctrl: bcm-iproc: Use SPDX header
pinctrl: armada-37xx: fix control of pins 32 and up
pinctrl: cherryview: restore Strago DMI workaround for all versions
pinctrl: intel: Allocate IRQ chip dynamic
|
|
Suggestion from coccinelle / coccicheck
CHECK drivers/iio/adc/twl4030-madc.c
drivers/iio/adc/twl4030-madc.c:524:6-15: WARNING: Comparison of 0/1 to bool variable
drivers/iio/adc/twl4030-madc.c:655:1-43: WARNING: Assignment of 0/1 to bool variable
drivers/iio/adc/twl4030-madc.c:659:2-44: WARNING: Assignment of 0/1 to bool variable
drivers/iio/adc/twl4030-madc.c:664:1-43: WARNING: Assignment of 0/1 to bool variable
drivers/iio/adc/twl4030-madc.c:498:2-34: WARNING: Assignment of 0/1 to bool variable
drivers/iio/adc/twl4030-madc.c:510:2-19: WARNING: Assignment of 0/1 to bool variable
drivers/iio/adc/twl4030-madc.c:511:2-11: WARNING: Assignment of 0/1 to bool variable
drivers/iio/adc/twl4030-madc.c:531:2-19: WARNING: Assignment of 0/1 to bool variable
drivers/iio/adc/twl4030-madc.c:532:2-11: WARNING: Assignment of 0/1 to bool variable
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
|
|
Document the LTC2983 temperature sensor devicetree bindings.
Tweaked by Jonathan to take into account the lack of signed output
being maintained by dtc yaml output. For now a comment added
that the unsigned array should actually be signed.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The LTC2983 is a Multi-Sensor High Accuracy Digital Temperature
Measurement System. It measures a wide variety of temperature sensors and
digitally outputs the result, in °C or °F, with 0.1°C accuracy and
0.001°C resolution. It can measure the temperature of all standard
thermocouples (type B,E,J,K,N,S,R,T), standard 2-,3-,4-wire RTDs,
thermistors and diodes.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We can drop some duplicate code if we use devm_action for disabling
regulators and pm and the managed variant of iio_device_register().
This allows us to completely remove all remove() callbacks from both
i2c and spi code.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The vddd and vdda supplies are always operated on together. We can
shrink the code a bit by using the bulk regulator helpers.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Currenly haltpoll isn't aware of the 'idle=' override, the priority is
'idle=poll' > haltpoll > 'idle=halt'. When 'idle=poll' is used, cpuidle
driver is bypassed but current_driver in sys still shows 'haltpoll'.
When 'idle=halt' is used, haltpoll takes precedence and makes
'idle=halt' have no effect.
Add a check to prevent the haltpoll driver from loading if 'idle=' is
present.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We change the locking in this function and forgot to update this error
path so we are accidentally still holding the "dev->lockdep_mutex".
Fixes: 87a30e1f05d7 ("driver-core, libnvdimm: Let device subsystems add local lockdep coverage")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
FXOS8700CQ is a small, low-power, 3-axis linear accelerometer and 3-axis
magnetometer combined into a single package. The device features a
selectable I2C or point-to-point SPI serial interface with 14-bit
accelerometer and 16-bit magnetometer ADC resolution along with
smart-embedded functions.
FXOS8700CQ has dynamically selectable accelerationfull-scale ranges of
±2 g/±4 g/±8 g and a fixed magnetic measurement range of ±1200 μT.
Output data rates (ODR) from 1.563 Hz to 800 Hz are selectable by the user
for each sensor. Interleaved magnetic and acceleration data is available
at ODR rates of up to 400 Hz. FXOS8700CQ is available in a plastic QFN
package and it is guaranteed to operate over the extended temperature
range of –40 °C to +85 °C.
TODO: Trigger and IRQ configuration support
Datasheet:
http://cache.freescale.com/files/sensors/doc/data_sheet/FXOS8700CQ.pdf
Signed-off-by: Robert Jones <rjones@gateworks.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This adds documentation for the Freescale FXOS8700 Inertial Measurement Unit
device-tree bindings.
Signed-off-by: Robert Jones <rjones@gateworks.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
A race condition exists while initialiazing perf_trace_buf from
perf_trace_init() and perf_kprobe_init().
CPU0 CPU1
perf_trace_init()
mutex_lock(&event_mutex)
perf_trace_event_init()
perf_trace_event_reg()
total_ref_count == 0
buf = alloc_percpu()
perf_trace_buf[i] = buf
tp_event->class->reg() //fails perf_kprobe_init()
goto fail perf_trace_event_init()
perf_trace_event_reg()
fail:
total_ref_count == 0
total_ref_count == 0
buf = alloc_percpu()
perf_trace_buf[i] = buf
tp_event->class->reg()
total_ref_count++
free_percpu(perf_trace_buf[i])
perf_trace_buf[i] = NULL
Any subsequent call to perf_trace_event_reg() will observe total_ref_count > 0,
causing the perf_trace_buf to be always NULL. This can result in perf_trace_buf
getting accessed from perf_trace_buf_alloc() without being initialized. Acquiring
event_mutex in perf_kprobe_init() before calling perf_trace_event_init() should
fix this race.
The race caused the following bug:
Unable to handle kernel paging request at virtual address 0000003106f2003c
Mem abort info:
ESR = 0x96000045
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000045
CM = 0, WnR = 1
user pgtable: 4k pages, 39-bit VAs, pgdp = ffffffc034b9b000
[0000003106f2003c] pgd=0000000000000000, pud=0000000000000000
Internal error: Oops: 96000045 [#1] PREEMPT SMP
Process syz-executor (pid: 18393, stack limit = 0xffffffc093190000)
pstate: 80400005 (Nzcv daif +PAN -UAO)
pc : __memset+0x20/0x1ac
lr : memset+0x3c/0x50
sp : ffffffc09319fc50
__memset+0x20/0x1ac
perf_trace_buf_alloc+0x140/0x1a0
perf_trace_sys_enter+0x158/0x310
syscall_trace_enter+0x348/0x7c0
el0_svc_common+0x11c/0x368
el0_svc_handler+0x12c/0x198
el0_svc+0x8/0xc
Ramdumps showed the following:
total_ref_count = 3
perf_trace_buf = (
0x0 -> NULL,
0x0 -> NULL,
0x0 -> NULL,
0x0 -> NULL)
Link: http://lkml.kernel.org/r/1571120245-4186-1-git-send-email-prsood@codeaurora.org
Cc: stable@vger.kernel.org
Fixes: e12f03d7031a9 ("perf/core: Implement the 'perf_kprobe' PMU")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Prateek Sood <prsood@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The platform detection VMWARE_PORT macro uses the VMWARE_HYPERVISOR_PORT
definition, but expects it to be an integer. However, when it was moved
to the new vmware.h include file, it was changed to be a string to better
fit into the VMWARE_HYPERCALL set of macros. This obviously breaks the
platform detection VMWARE_PORT functionality.
Change the VMWARE_HYPERVISOR_PORT and VMWARE_HYPERVISOR_PORT_HB
definitions to be integers, and use __stringify() for their stringified
form when needed.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b4dd4f6e3648 ("Add a header file for hypercall definitions")
Link: https://lkml.kernel.org/r/20191021172403.3085-3-thomas_os@shipmail.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
LLVM's assembler doesn't accept the short form INL instruction:
inl (%%dx)
but instead insists on the output register to be explicitly specified.
This was previously fixed for the VMWARE_PORT macro. Fix it also for
the VMWARE_HYPERCALL macro.
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: clang-built-linux@googlegroups.com
Fixes: b4dd4f6e3648 ("Add a header file for hypercall definitions")
Link: https://lkml.kernel.org/r/20191021172403.3085-2-thomas_os@shipmail.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoC Device Tree fixes for
5.4, please pull the following:
- Stefan removes the activity LED node from the CM3 DTS since there is
no driver for that LED yet and leds-gpio cannot drive it either
* tag 'arm-soc/for-5.4/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue
Link: https://lore.kernel.org/r/20191021194302.21024-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.4, please pull the following:
- Stefan fixes the MMC controller bus-width property for the Raspberry Pi
Zero Wireless which was incorrect after a prior refactoring
* tag 'arm-soc/for-5.4/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci
Link: https://lore.kernel.org/r/20191015172356.9650-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes
DaVinci fixes for v5.4
======================
* fix GPIO backlight support on DA850 by enabling the needed config
in davinci_all_defconfig. This is a fix because the driver and board
support got converted to use BACKLIGHT_GPIO driver, but defconfig update
is still missing in v5.4.
* fix for McBSP DMA on DM365
* tag 'davinci-fixes-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: enable GPIO backlight
ARM: davinci: dm365: Fix McBSP dma_slave_map entry
Link: https://lore.kernel.org/r/7f3393f9-59be-a2d4-c1e1-ba6e407681d1@ti.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
A number of fixes for individual boards like the rockpro64, and Hugsun X99
as well as a fix for the Gru-Kevin display override and fixing the dt-
binding for Theobroma boards to the correct naming that is also actually
used in the wild.
* tag 'v5.4-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix override mode for rk3399-kevin panel
arm64: dts: rockchip: Fix usb-c on Hugsun X99 TV Box
arm64: dts: rockchip: fix RockPro64 sdmmc settings
arm64: dts: rockchip: fix RockPro64 sdhci settings
arm64: dts: rockchip: fix RockPro64 vdd-log regulator settings
dt-bindings: arm: rockchip: fix Theobroma-System board bindings
arm64: dts: rockchip: fix Rockpro64 RK808 interrupt line
Link: https://lore.kernel.org/r/1599050.HRXuSXmxRg@phil
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.4:
- Re-enable SNVS power key for imx6q-logicpd board which was accidentally
disabled by a SoC level change.
- Fix I2C switches on vf610-zii-scu4-aib board by specifying property
i2c-mux-idle-disconnect.
- A fix on imx-scu API that reads UID from firmware to avoid kernel NULL
pointer dump.
- A series from Anson to correct i.MX7 GPT and i.MX8 USDHC IPG clock.
- A fix on DRM_MSM Kconfig regression on i.MX5 by adding the option
explicitly into imx_v6_v7_defconfig.
- Fix ARM regulator states issue for zii-ultra board, which is impacting
stability of the board.
- A correction on CPU core idle state name for LayerScape LX2160A SoC.
* tag 'imx-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM
arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk
ARM: dts: imx7s: Correct GPT's ipg clock source
ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect'
ARM: dts: imx6q-logicpd: Re-Enable SNVS power key
arm64: dts: lx2160a: Correct CPU core idle state name
arm64: dts: zii-ultra: fix ARM regulator states
soc: imx: imx-scu: Getting UID from SCU should have response
Link: https://lore.kernel.org/r/20191017141851.GA22506@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.4-rc cycle
More fixes for omap variants:
- Update more panel options in omap2plus_defconfig that got changed
as we moved to use generic LCD panels
- Remove unused twl_keypad for logicpd-torpedo-som to avoid boot
time warnings. This is only a cosmetic fix, but at least dmesg output
is now getting more readable after all the fixes to remove pointless
warnings
- Fix gpu_cm node name as we still have a non-standard node name
dependency for clocks. This should eventually get fixed by use
of domain specific compatible property
- Fix use of i2c-mux-idle-disconnect for m3874-iceboard
- Use level interrupt for omap4 & 5 wlcore to avoid lost edge
interrupts
* tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Use level interrupt for omap4 & 5 wlcore
ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage
ARM: dts: omap5: fix gpu_cm clock provider name
ARM: dts: logicpd-torpedo-som: Remove twl_keypad
ARM: omap2plus_defconfig: Fix selected panels after generic panel changes
Link: https://lore.kernel.org/r/pull-1571242890-118432@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-based SoCs Device Tree fixes
for 5.4, please pull the following:
- Rayangonda fixes the GPIO pins assignment for the Stringray SoCs
* tag 'arm-soc/for-5.4/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: Fix gpio to pinmux mapping
Link: https://lore.kernel.org/r/20191015172356.9650-2-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
r0-r3 & r12 registers are saved & restored, before & after svc
respectively. Intention was to preserve those registers across thread to
handler mode switch.
On v7-M, hardware saves the register context upon exception in AAPCS
complaint way. Restoring r0-r3 & r12 is done from stack location where
hardware saves it, not from the location on stack where these registers
were saved.
To clarify, on stm32f429 discovery board:
1. before svc, sp - 0x90009ff8
2. r0-r3,r12 saved to 0x90009ff8 - 0x9000a00b
3. upon svc, h/w decrements sp by 32 & pushes registers onto stack
4. after svc, sp - 0x90009fd8
5. r0-r3,r12 restored from 0x90009fd8 - 0x90009feb
Above means r0-r3,r12 is not restored from the location where they are
saved, but since hardware pushes the registers onto stack, the registers
are restored correctly.
Note that during register saving to stack (step 2), it goes past
0x9000a000. And it seems, based on objdump, there are global symbols
residing there, and it perhaps can cause issues on a non-XIP Kernel
(on XIP, data section is setup later).
Based on the analysis above, manually saving registers onto stack is at
best no-op and at worst can cause data section corruption. Hence remove
storing of registers onto stack before svc.
Fixes: b70cd406d7fe ("ARM: 8671/1: V7M: Preserve registers across switch from Thread to Handler mode")
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Acked-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
For Sitronix st1633 multi-touch controller driver the coordinates reported
for multiple fingers were wrong, as it was always taking LSB of coordinates
from the first contact data.
Signed-off-by: Dixit Parmar <dixitparmar19@gmail.com>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Cc: stable@vger.kernel.org
Fixes: 351e0592bfea ("Input: st1232 - add support for st1633")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204561
Link: https://lore.kernel.org/r/1566209314-21767-1-git-send-email-dixitparmar19@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Since ceeeb99cd821 we no longer abuse the DMA_CTRL_ACK flag for custom
driver use and introduced the MXS_DMA_CTRL_WAIT4END instead. We have not
changed all users to this flag though. This patch fixes it for the
mxs-mmc driver.
Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Fabio Estevam <festevam@gmail.com>
Reported-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Fix both the string and the struct member being printed.
Changes since v1:
- Now with a bonus grammar fix, too.
Fixes: 264b9436d23b ("drm/komeda: Enable writeback split support")
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190930122231.33029-1-mihail.atanassov@arm.com
|
|
HW doesn't allow flushing inactive pipes and raises an MERR interrupt
if you try to do so. Stop triggering the MERR interrupt in the
middle of a commit by calling drm_atomic_helper_commit_planes
with the ACTIVE_ONLY flag.
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010102950.56253-1-mihail.atanassov@arm.com
|
|
In case of master pending state, it should not trigger a master
command, otherwise data could be corrupted because this H/W shares
the same data buffer for slave and master operations. It also means
that H/W command queue handling is unreliable because of the buffer
sharing issue. To fix this issue, it clears command queue if a
master command is queued in pending state to use S/W solution
instead of H/W command queue handling. Also, it refines restarting
mechanism of the pending master command.
Fixes: 2e57b7cebb98 ("i2c: aspeed: Add multi-master use case support")
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Tested-by: Tao Ren <taoren@fb.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.4
A collection of fixes that have arrived since the merge window. There
are a small number of core fixes here but they are smaller ones around
error handling.
|
|
Add a write memory barrier to make sure that descriptors are actually
written to memory, before ringing the doorbell.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
According to the App note[1] detailing the tuning algorithm, for
temperatures < -20C, the initial tuning value should be min(largest value
in LPW - 24, ceil(13/16 ratio of LPW)). The largest value in LPW is
(max_window + 4 * (max_len - 1)) and not (max_window + 4 * max_len) itself.
Fix this implementation.
[1] http://www.ti.com/lit/an/spraca9b/spraca9b.pdf
Fixes: 961de0a856e3 ("mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)")
Cc: stable@vger.kernel.org
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Support new codec ALC711.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The following commit from the v5.4 merge window:
d44248a41337 ("perf/core: Rework memory accounting in perf_mmap()")
... breaks auxiliary trace buffer tracking.
If I run command 'perf record -e rbd000' to record samples and saving
them in the **auxiliary** trace buffer then the value of 'locked_vm' becomes
negative after all trace buffers have been allocated and released:
During allocation the values increase:
[52.250027] perf_mmap user->locked_vm:0x87 pinned_vm:0x0 ret:0
[52.250115] perf_mmap user->locked_vm:0x107 pinned_vm:0x0 ret:0
[52.250251] perf_mmap user->locked_vm:0x188 pinned_vm:0x0 ret:0
[52.250326] perf_mmap user->locked_vm:0x208 pinned_vm:0x0 ret:0
[52.250441] perf_mmap user->locked_vm:0x289 pinned_vm:0x0 ret:0
[52.250498] perf_mmap user->locked_vm:0x309 pinned_vm:0x0 ret:0
[52.250613] perf_mmap user->locked_vm:0x38a pinned_vm:0x0 ret:0
[52.250715] perf_mmap user->locked_vm:0x408 pinned_vm:0x2 ret:0
[52.250834] perf_mmap user->locked_vm:0x408 pinned_vm:0x83 ret:0
[52.250915] perf_mmap user->locked_vm:0x408 pinned_vm:0x103 ret:0
[52.251061] perf_mmap user->locked_vm:0x408 pinned_vm:0x184 ret:0
[52.251146] perf_mmap user->locked_vm:0x408 pinned_vm:0x204 ret:0
[52.251299] perf_mmap user->locked_vm:0x408 pinned_vm:0x285 ret:0
[52.251383] perf_mmap user->locked_vm:0x408 pinned_vm:0x305 ret:0
[52.251544] perf_mmap user->locked_vm:0x408 pinned_vm:0x386 ret:0
[52.251634] perf_mmap user->locked_vm:0x408 pinned_vm:0x406 ret:0
[52.253018] perf_mmap user->locked_vm:0x408 pinned_vm:0x487 ret:0
[52.253197] perf_mmap user->locked_vm:0x408 pinned_vm:0x508 ret:0
[52.253374] perf_mmap user->locked_vm:0x408 pinned_vm:0x589 ret:0
[52.253550] perf_mmap user->locked_vm:0x408 pinned_vm:0x60a ret:0
[52.253726] perf_mmap user->locked_vm:0x408 pinned_vm:0x68b ret:0
[52.253903] perf_mmap user->locked_vm:0x408 pinned_vm:0x70c ret:0
[52.254084] perf_mmap user->locked_vm:0x408 pinned_vm:0x78d ret:0
[52.254263] perf_mmap user->locked_vm:0x408 pinned_vm:0x80e ret:0
The value of user->locked_vm increases to a limit then the memory
is tracked by pinned_vm.
During deallocation the size is subtracted from pinned_vm until
it hits a limit. Then a larger value is subtracted from locked_vm
leading to a large number (because of type unsigned):
[64.267797] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x78d
[64.267826] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x70c
[64.267848] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x68b
[64.267869] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x60a
[64.267891] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x589
[64.267911] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x508
[64.267933] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x487
[64.267952] perf_mmap_close mmap_user->locked_vm:0x408 pinned_vm:0x406
[64.268883] perf_mmap_close mmap_user->locked_vm:0x307 pinned_vm:0x406
[64.269117] perf_mmap_close mmap_user->locked_vm:0x206 pinned_vm:0x406
[64.269433] perf_mmap_close mmap_user->locked_vm:0x105 pinned_vm:0x406
[64.269536] perf_mmap_close mmap_user->locked_vm:0x4 pinned_vm:0x404
[64.269797] perf_mmap_close mmap_user->locked_vm:0xffffffffffffff84 pinned_vm:0x303
[64.270105] perf_mmap_close mmap_user->locked_vm:0xffffffffffffff04 pinned_vm:0x202
[64.270374] perf_mmap_close mmap_user->locked_vm:0xfffffffffffffe84 pinned_vm:0x101
[64.270628] perf_mmap_close mmap_user->locked_vm:0xfffffffffffffe04 pinned_vm:0x0
This value sticks for the user until system is rebooted, causing
follow-on system calls using locked_vm resource limit to fail.
Note: There is no issue using the normal trace buffer.
In fact the issue is in perf_mmap_close(). During allocation auxiliary
trace buffer memory is either traced as 'extra' and added to 'pinned_vm'
or trace as 'user_extra' and added to 'locked_vm'. This applies for
normal trace buffers and auxiliary trace buffer.
However in function perf_mmap_close() all auxiliary trace buffer is
subtraced from 'locked_vm' and never from 'pinned_vm'. This breaks the
ballance.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: gor@linux.ibm.com
Cc: hechaol@fb.com
Cc: heiko.carstens@de.ibm.com
Cc: linux-perf-users@vger.kernel.org
Cc: songliubraving@fb.com
Fixes: d44248a41337 ("perf/core: Rework memory accounting in perf_mmap()")
Link: https://lkml.kernel.org/r/20191021083354.67868-1-tmricht@linux.ibm.com
[ Minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf buildid-cache:
Adrian Hunter:
- Fix mode setting in copyfile_mode_ns() when copying /proc/kcore.
perf evlist:
Andi Kleen:
- Fix freeing id arrays.
tools headers:
- Sync sched.h anc kvm.h headers with the kernel sources.
perf jvmti:
Thomas Richter:
- Link against tools/lib/ctype.o to have weak strlcpy().
perf annotate:
Gustavo A. R. Silva:
- Fix multiple memory and file descriptor leaks, found by coverity.
perf c2c/kmem:
Yunfeng Ye:
- Fix leaks in error handling paths in 'perf c2c', 'perf kmem', found by
internal static analysis tool.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
All the drivers, which use the OPP framework control regulators, which
are already enabled. Typically those regulators are also system critical,
due to providing power to CPU core or system buses. It turned out that
there are cases, where calling regulator_enable() on such boot-enabled
regulator has side-effects and might change its initial voltage due to
performing initial voltage balancing without all restrictions from the
consumers. Until this issue becomes finally solved in regulator core,
avoid calling regulator_enable()/disable() from the OPP framework.
This reverts commit 7f93ff73f7c8c8bfa6be33bcc16470b0b44682aa.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
