| Age | Commit message (Collapse) | Author |
|---|
|
0x11 and 0x12 set the ECN bits based on RFC2474, it would be better to avoid
that. 0x14 and 0x18 would be better and works as well.
Reported-by: Petr Machata <petrm@mellanox.com>
Fixes: 4e867c9a50ff ("selftests: forwarding: vxlan_bridge_1d: fix tos value")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The reserved member should be named reserved3.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When T2 timer is to be stopped, the asoc should also be deleted,
otherwise, there will be no chance to call sctp_association_free
and the asoc could last in memory forever.
However, in sctp_sf_shutdown_sent_abort(), after adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the
format error from __sctp_sf_do_9_1_abort() and miss adding
SCTP_CMD_ASSOC_FAILED where the asoc will be deleted.
This patch is to fix it by moving the format error check out of
__sctp_sf_do_9_1_abort(), and do it before adding the cmd
SCTP_CMD_TIMER_STOP for T2 timer.
Thanks Hangbin for reporting this issue by the fuzz testing.
v1->v2:
- improve the comment in the code as Marcelo's suggestion.
Fixes: 96ca468b86b0 ("sctp: check invalid value of length parameter in error cause")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tc flower rules that are based on src or dst port blocking are sometimes
ineffective due to uninitialized stack data. __skb_flow_dissect() extracts
ports from the skb for tc flower to match against. However, the port
dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in
key_control->flags. All callers of __skb_flow_dissect(), zero-out the
key_control field except for fl_classify() as used by the flower
classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to
__skb_flow_dissect(), since key_control is allocated on the stack
and may not be initialized.
Since key_basic and key_control are present for all flow keys, let's
make sure they are initialized.
Fixes: 62230715fd24 ("flow_dissector: do not dissect l4 ports for fragments")
Co-developed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull eCryptfs fixes from Tyler Hicks:
- downgrade the eCryptfs maintenance status to "Odd Fixes"
- change my email address
- fix a couple memory leaks in error paths
- stability improvement to avoid a needless BUG_ON()
* tag 'ecryptfs-5.6-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
ecryptfs: replace BUG_ON with error handling code
eCryptfs: Replace deactivated email address
MAINTAINERS: eCryptfs: Update maintainer address and downgrade status
ecryptfs: fix a memory leak bug in ecryptfs_init_messaging()
ecryptfs: fix a memory leak bug in parse_tag_1_packet()
|
|
Fix Sphinx format warnings by adding a blank line.
Documentation/hwmon/xdpe12284.rst:28: WARNING: Unexpected indentation.
Documentation/hwmon/xdpe12284.rst:29: WARNING: Block quote ends without a blank line; unexpected unindent.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Cc: Vadim Pasternak <vadimp@mellanox.com>
Link: https://lore.kernel.org/r/0094c570-dd4c-dc0e-386d-ea1c39b6a582@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Each extracted frame on Ocelot has an IFH. The frame and IFH are extracted
by reading chuncks of 4 bytes from a register.
In case the IFH and frames were read corretly it would try to read the next
frame. In case there are no more frames in the queue, it checks if there
were any previous errors and in that case clear the queue. But this check
will always succeed also when there are no errors. Because when extracting
the IFH the error is checked against 4(number of bytes read) and then the
error is set only if the extraction of the frame failed. So in a happy case
where there are no errors the err variable is still 4. So it could be
a case where after the check that there are no more frames in the queue, a
frame will arrive in the queue but because the error is not reseted, it
would try to flush the queue. So the frame will be lost.
The fix consist in resetting the error after reading the IFH.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the correct mask for this two-bit field. This fixes setting the DAI
data format to RIGHT_J or DSP_A.
Fixes: 36c684936fae ("ASoC: Add sun8i digital audio codec")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200217064250.15516-7-samuel@sholland.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"This is the fix for sleeping in a locked section bug reported by Dave
Jones, caused by a patch dependence in development and pulled
branches.
I picked the existing patch over the fixup that Filipe sent, as it's a
bit more generic fix. I've verified it with a specific test case, some
rsync stress and one round of fstests"
* tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't set path->leave_spinning for truncate
|
|
Mika spotted
<4>[17436.705441] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4>[17436.705447] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.5.0+ #1
<4>[17436.705449] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 3805 05/16/2018
<4>[17436.705512] RIP: 0010:__execlists_submission_tasklet+0xc4d/0x16e0 [i915]
<4>[17436.705516] Code: c5 4c 8d 60 e0 75 17 e9 8c 07 00 00 49 8b 44 24 20 49 39 c5 4c 8d 60 e0 0f 84 7a 07 00 00 49 8b 5c 24 08 49 8b 87 80 00 00 00 <48> 39 83 d8 fe ff ff 75 d9 48 8b 83 88 fe ff ff a8 01 0f 84 b6 05
<4>[17436.705518] RSP: 0018:ffffc9000012ce80 EFLAGS: 00010083
<4>[17436.705521] RAX: ffff88822ae42000 RBX: 5a5a5a5a5a5a5a5a RCX: dead000000000122
<4>[17436.705523] RDX: ffff88822ae42588 RSI: ffff8881e32a7908 RDI: ffff8881c429fd48
<4>[17436.705525] RBP: ffffc9000012cf00 R08: ffff88822ae42588 R09: 00000000fffffffe
<4>[17436.705527] R10: ffff8881c429fb80 R11: 00000000a677cf08 R12: ffff8881c42a0aa8
<4>[17436.705529] R13: ffff8881c429fd38 R14: ffff88822ae42588 R15: ffff8881c429fb80
<4>[17436.705532] FS: 0000000000000000(0000) GS:ffff88822ed00000(0000) knlGS:0000000000000000
<4>[17436.705534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[17436.705536] CR2: 00007f858c76d000 CR3: 0000000005610003 CR4: 00000000003606e0
<4>[17436.705538] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[17436.705540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
<4>[17436.705542] Call Trace:
<4>[17436.705545] <IRQ>
<4>[17436.705603] execlists_submission_tasklet+0xc0/0x130 [i915]
which is us consuming a partially initialised new waiter in
defer_requests(). We can prevent this by initialising the i915_dependency
prior to making it visible, and since we are using a concurrent
list_add/iterator mark them up to the compiler.
Fixes: 8ee36e048c98 ("drm/i915/execlists: Minimalistic timeslicing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206204915.2636606-2-chris@chris-wilson.co.uk
(cherry picked from commit f14f27b1663269a81ed62d3961fe70250a1a0623)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Virtual engines are fleeting. They carry a reference count and may be freed
when their last request is retired. This makes them unsuitable for the
task of housing engine->retire.work so assert that it is not used.
Tvrtko tracked down an instance where we did indeed violate this rule.
In virtual_submit_request, we flush a completed request directly with
__i915_request_submit and this causes us to queue that request on the
veng's breadcrumb list and signal it. Leading us down a path where we
should not attach the retire.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: dc93c9b69315 ("drm/i915/gt: Schedule request retirement when signaler idles")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206204915.2636606-1-chris@chris-wilson.co.uk
(cherry picked from commit f91d8156ab8afb32447cd2bf3189219bab943f18)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We lack full state readout of DSC config, which may lead to DSC enable
using a config that's all zeros, failing spectacularly. Force full
modeset and thus compute config at probe to get a sane state, until we
implement DSC state readout. Any fastset that did appear to work with
DSC at probe, worked by coincidence. [1] is an example of a change that
triggered the issue on TGL DSI DSC.
[1] http://patchwork.freedesktop.org/patch/msgid/20200212150102.7600-1-ville.syrjala@linux.intel.com
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: fbacb15ea814 ("drm/i915/dsc: add basic hardware state readout support")
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213140412.32697-3-stanislav.lisovskiy@intel.com
(cherry picked from commit a4277aa398d76db109d6b8420934f68daf69a6c3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Voltage level depends not only on the cdclk, but also on the DDI clock.
Last time the bspec voltage level table for EHL was updated, we only
updated the cdclk requirements, but forgot to account for the new port
clock criteria.
Bspec: 21809
Fixes: d147483884ed ("drm/i915/ehl: Update voltage level checks")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207001417.1229251-1-matthew.d.roper@intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 9d5fd37ed7e26efdbe90f492d7eb8b53dcdb61d6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We've moved from bugzilla to gitlab.
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212160434.6437-2-jani.nikula@intel.com
(cherry picked from commit ddae4d7af0bbe3b2051f1603459a8b24e9a19324)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We've moved from bugzilla to gitlab.
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212160434.6437-1-jani.nikula@intel.com
(cherry picked from commit 3a6a4f0810c8ade6f1ff63c34aa9834176b9d88b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
chip->allocated_banks, an array of tpm_bank_info structures, contains the
list of TPM algorithm IDs of allocated PCR banks. It also contains the
corresponding ID of the crypto subsystem, so that users of the TPM driver
can calculate a digest for a PCR extend operation.
However, if there is no mapping between TPM algorithm ID and crypto ID, the
crypto_id field of tpm_bank_info remains set to zero (the array is
allocated and initialized with kcalloc() in tpm2_get_pcr_allocation()).
Zero should not be used as value for unknown mappings, as it is a valid
crypto ID (HASH_ALGO_MD4).
Thus, initialize crypto_id to HASH_ALGO__LAST.
Cc: stable@vger.kernel.org # 5.1.x
Fixes: 879b589210a9 ("tpm: retrieve digest size of unknown algorithms with PCR read")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Revert tpm_tis_spi_mod.ko back to tpm_tis_spi.ko as the rename could
break user space scripts. This can be achieved by renaming tpm_tis_spi.c
as tpm_tis_spi_main.c. Then tpm_tis_spi-y can be used inside the
makefile.
Cc: Andrey Pronin <apronin@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: stable@vger.kernel.org # 5.5.x
Fixes: 797c0113c9a4 ("tpm: tpm_tis_spi: Support cr50 devices")
Reported-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Inside the intel_timeline_get_seqno(), we currently track the retirement
of the old cachelines by listening to the new request. This requires
that the new request is ready to be used and so requires a minimum bit
of initialisation prior to getting the new seqno.
Fixes: b1e3177bd1d8 ("drm/i915: Coordinate i915_active with its own mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203094152.4150550-2-chris@chris-wilson.co.uk
(cherry picked from commit 855e39e65cfc33a73724f1cc644ffc5754864a20)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
To enable non-persistent contexts, we require a means of cancelling any
inflight work from that context. This is first done "gracefully" by
using preemption to kick the active context off the engine, and then
forcefully by resetting the engine if it is active. If we are unable to
reset the engine to remove hostile userspace, we should not allow
userspace to opt into using non-persistent contexts.
If the per-engine reset fails, we still do a full GPU reset, but that is
rare and usually indicative of much deeper issues. The damage is already
done. However, the goal of the interface to allow long running compute
jobs without causing collateral damage elsewhere, and if we are unable
to support that we should make that known by not providing the
interface (and falsely pretending we can).
Fixes: a0e047156cde ("drm/i915/gem: Make context persistence optional")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200130164553.1937718-1-chris@chris-wilson.co.uk
(cherry picked from commit d1b9b5f127bc3797fc274cfa4f363e039f045c3a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
For the same reason as commit 19514fc665ff ("arm, kbuild: make "make
install" not depend on vmlinux"), the install targets should never
trigger the rebuild of the kernel.
The variable, CONFIGURE, is not set by anyone. Remove it as well.
Link: https://lkml.kernel.org/r/20200216144829.27023-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Clang warns:
../arch/s390/boot/kaslr.c:78:25: warning: passing 'char *' to parameter
of type 'const u8 *' (aka 'const unsigned char *') converts between
pointers to integer
types with different sign [-Wpointer-sign]
(char *) entropy, (char *) entropy,
^~~~~~~~~~~~~~~~
../arch/s390/include/asm/cpacf.h:280:28: note: passing argument to
parameter 'src' here
u8 *dest, const u8 *src, long src_len)
^
2 warnings generated.
Fix the cast to match what else is done in this function.
Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)")
Link: https://github.com/ClangBuiltLinux/linux/issues/862
Link: https://lkml.kernel.org/r/20200208141052.48476-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
storage_key_init_range
Clang warns:
In file included from ../arch/s390/purgatory/purgatory.c:10:
In file included from ../include/linux/kexec.h:18:
In file included from ../include/linux/crash_core.h:6:
In file included from ../include/linux/elfcore.h:5:
In file included from ../include/linux/user.h:1:
In file included from ../arch/s390/include/asm/user.h:11:
../arch/s390/include/asm/page.h:45:6: warning: converting the result of
'<<' to a boolean always evaluates to false
[-Wtautological-constant-compare]
if (PAGE_DEFAULT_KEY)
^
../arch/s390/include/asm/page.h:23:44: note: expanded from macro
'PAGE_DEFAULT_KEY'
#define PAGE_DEFAULT_KEY (PAGE_DEFAULT_ACC << 4)
^
1 warning generated.
Explicitly compare this against zero to silence the warning as it is
intended to be used in a boolean context.
Fixes: de3fa841e429 ("s390/mm: fix compile for PAGE_DEFAULT_KEY != 0")
Link: https://github.com/ClangBuiltLinux/linux/issues/860
Link: https://lkml.kernel.org/r/20200214064207.10381-1-natechancellor@gmail.com
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Fix typos in a comments.
Link: https://lkml.kernel.org/r/20200212084622.9219-1-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Use kobj_to_dev() API instead of container_of().
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Signed-off-by: chenqiwu <qiwuchen55@gmail.com>
Message-Id: <1581688293-17283-1-git-send-email-qiwuchen55@gmail.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The guest support for protected virtualization is default on most
distributions.
Also refresh defconfig and debug_defconfig.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283
Link: https://lore.kernel.org/r/d44c53a7-9bc1-15c7-6d4a-0c10cb9dffce@virtuozzo.com
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This if guards whether user-space wants a copy of the offload-jited
bytecode and whether this bytecode exists. By erroneously doing a bitwise
AND instead of a logical AND on user- and kernel-space buffer-size can lead
to no data being copied to user-space especially when user-space size is a
power of two and bigger then the kernel-space buffer.
Fixes: fcfb126defda ("bpf: add new jited info fields in bpf_dev_offload and bpf_prog_info")
Signed-off-by: Johannes Krude <johannes@krude.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20200212193227.GA3769@phlox.h.transitiv.net
|
|
The only time we actually leave the path spinning is if we're truncating
a small amount and don't actually free an extent, which is not a common
occurrence. We have to set the path blocking in order to add the
delayed ref anyway, so the first extent we find we set the path to
blocking and stay blocking for the duration of the operation. With the
upcoming file extent map stuff there will be another case that we have
to have the path blocking, so just swap to blocking always.
Note: this patch also fixes a warning after 28553fa992cb ("Btrfs: fix
race between shrinking truncate and fiemap") got merged that inserts
extent locks around truncation so the path must not leave spinning locks
after btrfs_search_slot.
[70.794783] BUG: sleeping function called from invalid context at mm/slab.h:565
[70.794834] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1141, name: rsync
[70.794863] 5 locks held by rsync/1141:
[70.794876] #0: ffff888417b9c408 (sb_writers#17){.+.+}, at: mnt_want_write+0x20/0x50
[70.795030] #1: ffff888428de28e8 (&type->i_mutex_dir_key#13/1){+.+.}, at: lock_rename+0xf1/0x100
[70.795051] #2: ffff888417b9c608 (sb_internal#2){.+.+}, at: start_transaction+0x394/0x560
[70.795124] #3: ffff888403081768 (btrfs-fs-01){++++}, at: btrfs_try_tree_write_lock+0x2f/0x160
[70.795203] #4: ffff888403086568 (btrfs-fs-00){++++}, at: btrfs_try_tree_write_lock+0x2f/0x160
[70.795222] CPU: 5 PID: 1141 Comm: rsync Not tainted 5.6.0-rc2-backup+ #2
[70.795362] Call Trace:
[70.795374] dump_stack+0x71/0xa0
[70.795445] ___might_sleep.part.96.cold.106+0xa6/0xb6
[70.795459] kmem_cache_alloc+0x1d3/0x290
[70.795471] alloc_extent_state+0x22/0x1c0
[70.795544] __clear_extent_bit+0x3ba/0x580
[70.795557] ? _raw_spin_unlock_irq+0x24/0x30
[70.795569] btrfs_truncate_inode_items+0x339/0xe50
[70.795647] btrfs_evict_inode+0x269/0x540
[70.795659] ? dput.part.38+0x29/0x460
[70.795671] evict+0xcd/0x190
[70.795682] __dentry_kill+0xd6/0x180
[70.795754] dput.part.38+0x2ad/0x460
[70.795765] do_renameat2+0x3cb/0x540
[70.795777] __x64_sys_rename+0x1c/0x20
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Fixes: 28553fa992cb ("Btrfs: fix race between shrinking truncate and fiemap")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The same quirk that was applied to MSI GL73 is needed for MSI GP63,
too. Adding the entry with the SSID 1462:1228.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206503
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200217151947.17528-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Removed this logic because It is BIOS which needs to
power off the ACP power domian through ACP_PGFSM_CTRL
register when you De-initialize ACP Engine.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/1581935964-15059-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sets plugged_cb to NULL when component removing to notify its consumers
: no further plugged status report is required.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200217105513.1.Icc323daaf71ad02f191fd8d91136b01b61eca5e3@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since commit 057b52b4b3d58 ("watchdog: da9062: make restart handler atomic
safe"), the driver calls i2c functions directly. It now therefore depends
on I2C. This is a hard dependency which overrides COMPILE_TEST.
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: 057b52b4b3d58 ("watchdog: da9062: make restart handler atomic safe")
Cc: Marco Felsch <m.felsch@pengutronix.de>
Cc: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Cc: Stefan Lengfeld <contact@stefanchrist.eu>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This fixes commit f6c98b08381c ("watchdog: da9062: add power management
ops"). During discussion [1] we agreed that this should be configurable
because it is a device quirk if we can't use the hw watchdog auto
suspend function.
[1] https://lore.kernel.org/linux-watchdog/20191128171931.22563-1-m.felsch@pengutronix.de/
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Fixes: f6c98b08381c ("watchdog: da9062: add power management ops")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200207071518.5559-1-m.felsch@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The da9062 hw has a minimum ping cool down phase of at least 200ms. The
driver takes that into account by setting the min_hw_heartbeat_ms to
300ms and the core guarantees that the hw limit is observed for the
ping() calls. But the core can't guarantee the required minimum ping
cool down phase if a stop() command is send immediately after the ping()
command. So it is not allowed to ping the watchdog within the stop()
command as the driver does. Remove the ping can be done without doubts
because the watchdog gets disabled anyway and a (re)start resets the
watchdog counter too.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200120091729.16256-1-m.felsch@pengutronix.de
[groeck: Updated description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Fix build error when CONFIG_RESET_CONTROLLER is not set by
selecting RESET_CONTROLLER.
ld: drivers/watchdog/mtk_wdt.o: in function `mtk_wdt_probe':
mtk_wdt.c:(.text+0x3ec): undefined reference to `devm_reset_controller_register'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: c254e103082b74e ("watchdog: mtk_wdt: mt8183: Add reset controller")
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-watchdog@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/77c1e557-4941-3806-2933-6c3583576390@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://people.freedesktop.org/~gabbayo/linux into char-misc-linus
Oded writes:
This tag contains the following fixes:
- Two fixes to the reset process of the ASIC. Without these fixes, the
reset process might take a long time and produce a kernel panic.
Alternatively, the ASIC could get stuck.
- Fix to reference counting of a command buffer object. It was kref_put
one more time than it should have been.
* tag 'misc-habanalabs-fixes-2020-02-11' of git://people.freedesktop.org/~gabbayo/linux:
habanalabs: patched cb equals user cb in device memset
habanalabs: do not halt CoreSight during hard reset
habanalabs: halt the engines before hard-reset
|
|
This patch further relaxes the need to drop an skb due to a clash with
an existing conntrack entry.
Current clash resolution handles the case where the clash occurs between
two identical entries (distinct nf_conn objects with same tuples), i.e.:
Original Reply
existing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353
clashing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353
... existing handling will discard the unconfirmed clashing entry and
makes skb->_nfct point to the existing one. The skb can then be
processed normally just as if the clash would not have existed in the
first place.
For other clashes, the skb needs to be dropped.
This frequently happens with DNS resolvers that send A and AAAA queries
back-to-back when NAT rules are present that cause packets to get
different DNAT transformations applied, for example:
-m statistics --mode random ... -j DNAT --dnat-to 10.0.0.6:5353
-m statistics --mode random ... -j DNAT --dnat-to 10.0.0.7:5353
In this case the A or AAAA query is dropped which incurs a costly
delay during name resolution.
This patch also allows this collision type:
Original Reply
existing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.6:5353
clashing: 10.2.3.4:42 -> 10.8.8.8:53 10.2.3.4:42 <- 10.0.0.7:5353
In this case, clash is in original direction -- the reply direction
is still unique.
The change makes it so that when the 2nd colliding packet is received,
the clashing conntrack is tagged with new IPS_NAT_CLASH_BIT, gets a fixed
1 second timeout and is inserted in the reply direction only.
The entry is hidden from 'conntrack -L', it will time out quickly
and it can be early dropped because it will never progress to the
ASSURED state.
To avoid special-casing the delete code path to special case
the ORIGINAL hlist_nulls node, a new helper, "hlist_nulls_add_fake", is
added so hlist_nulls_del() will work.
Example:
CPU A: CPU B:
1. 10.2.3.4:42 -> 10.8.8.8:53 (A)
2. 10.2.3.4:42 -> 10.8.8.8:53 (AAAA)
3. Apply DNAT, reply changed to 10.0.0.6
4. 10.2.3.4:42 -> 10.8.8.8:53 (AAAA)
5. Apply DNAT, reply changed to 10.0.0.7
6. confirm/commit to conntrack table, no collisions
7. commit clashing entry
Reply comes in:
10.2.3.4:42 <- 10.0.0.6:5353 (A)
-> Finds a conntrack, DNAT is reversed & packet forwarded to 10.2.3.4:42
10.2.3.4:42 <- 10.0.0.7:5353 (AAAA)
-> Finds a conntrack, DNAT is reversed & packet forwarded to 10.2.3.4:42
The conntrack entry is deleted from table, as it has the NAT_CLASH
bit set.
In case of a retransmit from ORIGINAL dir, all further packets will get
the DNAT transformation to 10.0.0.6.
I tried to come up with other solutions but they all have worse
problems.
Alternatives considered were:
1. Confirm ct entries at allocation time, not in postrouting.
a. will cause uneccesarry work when the skb that creates the
conntrack is dropped by ruleset.
b. in case nat is applied, ct entry would need to be moved in
the table, which requires another spinlock pair to be taken.
c. breaks the 'unconfirmed entry is private to cpu' assumption:
we would need to guard all nfct->ext allocation requests with
ct->lock spinlock.
2. Make the unconfirmed list a hash table instead of a pcpu list.
Shares drawback c) of the first alternative.
3. Document this is expected and force users to rearrange their
ruleset (e.g. by using "-m cluster" instead of "-m statistics").
nft has the 'jhash' expression which can be used instead of 'numgen'.
Major drawback: doesn't fix what I consider a bug, not very realistic
and I believe its reasonable to have the existing rulesets to 'just
work'.
4. Document this is expected and force users to steer problematic
packets to the same CPU -- this would serialize the "allocate new
conntrack entry/nat table evaluation/perform nat/confirm entry", so
no race can occur. Similar drawback to 3.
Another advantage of this patch compared to 1) and 2) is that there are
no changes to the hot path; things are handled in the udp tracker and
the clash resolution path.
Cc: rcu@vger.kernel.org
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new device id for the 100 devie. It has 4 interfaces like the 28
and 28L devices but a larger endpoint so more I/O pins.
Cc: Christoph Jung <jung@codemercs.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200214161148.GA3963518@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While certain modeset operations on gv100+ need us to temporarily
disable the LUT, we make the mistake of sometimes neglecting to
reprogram the LUT after such modesets. In particular, moving a head from
one encoder to another seems to trigger this quite often. GV100+ is very
picky about having a LUT in most scenarios, so this causes the display
engine to hang with the following error code:
disp: chid 1 stat 00005080 reason 5 [INVALID_STATE] mthd 0200 data
00000001 code 0000002d)
So, fix this by always re-programming the LUT if we're clearing it in a
state where the wndw is still visible, and has a XLUT handle programmed.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: facaed62b4cb ("drm/nouveau/kms/gv100: initial support")
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The call to of_get_mac_address() can return -EPROBE_DEFER, for instance
when the MAC address is read from a NVMEM driver that did not probe yet.
Cc: H. Nikolaus Schaller <hns@goldelico.com>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix all kernel-doc warnings in <linux/skbuff.h>.
Fixes these warnings:
../include/linux/skbuff.h:890: warning: Function parameter or member 'list' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'dev_scratch' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'ip_defrag_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'skb_mstamp_ns' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member '__cloned_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'head_frag' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member '__pkt_type_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'encapsulation' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'encap_hdr_csum' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_valid' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member '__pkt_vlan_present_offset' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'vlan_present' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_complete_sw' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'csum_level' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'inner_protocol_type' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'remcsum_offload' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'sender_cpu' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'reserved_tailroom' not described in 'sk_buff'
../include/linux/skbuff.h:890: warning: Function parameter or member 'inner_ipproto' not described in 'sk_buff'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove stale comments since this flag is no longer a bit mask
but is a bit field.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix all kernel-doc warnings for <net/sock.h>.
Fixes these warnings:
../include/net/sock.h:232: warning: Function parameter or member 'skc_addrpair' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_portpair' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_ipv6only' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_net_refcnt' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_v6_daddr' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_v6_rcv_saddr' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_cookie' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_listener' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_tw_dr' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_rcv_wnd' not described in 'sock_common'
../include/net/sock.h:232: warning: Function parameter or member 'skc_tw_rcv_nxt' not described in 'sock_common'
../include/net/sock.h:498: warning: Function parameter or member 'sk_rx_skb_cache' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_wq_raw' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'tcp_rtx_queue' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_tx_skb_cache' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_route_forced_caps' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_txtime_report_errors' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_validate_xmit_skb' not described in 'sock'
../include/net/sock.h:498: warning: Function parameter or member 'sk_bpf_storage' not described in 'sock'
../include/net/sock.h:2024: warning: No description found for return value of 'sk_wmem_alloc_get'
../include/net/sock.h:2035: warning: No description found for return value of 'sk_rmem_alloc_get'
../include/net/sock.h:2046: warning: No description found for return value of 'sk_has_allocations'
../include/net/sock.h:2082: warning: No description found for return value of 'skwq_has_sleeper'
../include/net/sock.h:2244: warning: No description found for return value of 'sk_page_frag'
../include/net/sock.h:2444: warning: Function parameter or member 'tcp_rx_skb_cache_key' not described in 'DECLARE_STATIC_KEY_FALSE'
../include/net/sock.h:2444: warning: Excess function parameter 'sk' description in 'DECLARE_STATIC_KEY_FALSE'
../include/net/sock.h:2444: warning: Excess function parameter 'skb' description in 'DECLARE_STATIC_KEY_FALSE'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Micrel KSZ8851-16MLLI datasheet DS00002357B page 12 states that
BE[3:0] signals are active high. This contradicts the measurements
of the behavior of the actual chip, where these signals behave as
active low. For example, to read the CIDER register, the bus must
expose 0xc0c0 during the address phase, which means BE[3:0]=4'b1100.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The packet data written to and read from Micrel KSZ8851-16MLLI must be
byte-swapped in 16-bit mode, add this byte-swapping.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This driver is mixing 8-bit and 16-bit bus accessors for reasons unknown,
however the speculation is that this was some sort of attempt to support
the 8-bit bus mode.
As per the KS8851-16MLL documentation, all two registers accessed via the
8-bit accessors are internally 16-bit registers, so reading them using
16-bit accessors is fine. The KS_CCR read can be converted to 16-bit read
outright, as it is already a concatenation of two 8-bit reads of that
register. The KS_RXQCR accesses are 8-bit only, however writing the top
8 bits of the register is OK as well, since the driver caches the entire
16-bit register value anyway.
Finally, the driver is not used by any hardware in the kernel right now.
The only hardware available to me is one with 16-bit bus, so I have no
way to test the 8-bit bus mode, however it is unlikely this ever really
worked anyway. If the 8-bit bus mode is ever required, it can be easily
added by adjusting the 16-bit accessors to do 2 consecutive accesses,
which is how this should have been done from the beginning.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Without this modification and if CRYPTO is not selected, we have this
warning:
WARNING: unmet direct dependencies detected for CRYPTO_LIB_SHA256
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- MPTCP [=y] && NET [=y] && INET [=y]
MPTCP selects CRYPTO_LIB_SHA256 which seems to depend on CRYPTO. CRYPTO
is now selected to avoid this issue.
Even though the config system prints that warning, it looks like
sha256.c is compiled and linked even without CONFIG_CRYPTO. Since MPTCP
will end up needing CONFIG_CRYPTO anyway in future commits -- currently
in preparation for net-next -- we propose to add it now to fix the
warning.
The dependency in the config system comes from the fact that
CRYPTO_LIB_SHA256 is defined in "lib/crypto/Kconfig" which is sourced
from "crypto/Kconfig" only if CRYPTO is selected.
Fixes: 65492c5a6ab5 (mptcp: move from sha1 (v0) to sha256 (v1))
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Taehee Yoo says:
====================
bonding: fix bonding interface bugs
This patchset fixes lockdep problem in bonding interface
1. The first patch is to add missing netdev_update_lockdep_key().
After bond_release(), netdev_update_lockdep_key() should be called.
But both ioctl path and attribute path don't call
netdev_update_lockdep_key().
This patch adds missing netdev_update_lockdep_key().
2. The second patch is to export netdev_next_lower_dev_rcu symbol.
netdev_next_lower_dev_rcu() is useful to implement the function,
which is to walk their all lower interfaces.
This patch is actually a preparing patch for the third patch.
3. The last patch is to fix lockdep waring in bond_get_stats().
The stats_lock uses a dynamic lockdep key.
So, after "nomaster" operation, updating the dynamic lockdep key
routine is needed. but it doesn't
So, lockdep warning occurs.
Change log:
v1 -> v2:
- Update headline from "fix bonding interface bugs"
to "bonding: fix bonding interface bugs"
- Drop a patch("bonding: do not collect slave's stats")
- Add new patches
- ("net: export netdev_next_lower_dev_rcu()")
- ("bonding: fix lockdep warning in bond_get_stats()")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
