| Age | Commit message (Collapse) | Author |
|---|
|
Currently firmware MLO capability is validated via firmware IE, however
WCN7850 firmware does not support this method but instead advertises
MLO by single_chip_mlo_support bit in QMI phy capability message.
Change to consider single_chip_mlo_support bit as well for MLO capability
validation.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250409-ath12k-wcn7850-mlo-support-v2-3-3801132ca2c3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently fw_features is used to check if a specific feature is supported
or not: if the feature bit is set the feature is believed to be supported,
otherwise not supported. Since fw_features is populated only when using
firmware API-2, and by default it is zero, in case of API-1 such as
WCN7850 firmware it is possible that a feature is not enabled by host
while actually firmware supports it.
To avoid this, add a new flag indicating whether fw_features has been ever
populated or not, and only when that flag is true we choose to believe
fw_features. This benefits firmware MLO capability validation in an
upcoming patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250409-ath12k-wcn7850-mlo-support-v2-2-3801132ca2c3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
There are several places checking if a specific bit set in
ab->fw.fw_features, and in an upcoming patch additional check needs to be
added at all places.
Introduce a new helper ath12k_fw_feature_supported() to avoid code
duplication.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250409-ath12k-wcn7850-mlo-support-v2-1-3801132ca2c3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
When ngbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent
error paths after ngbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when ngbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init().
Fixes: 02338c484ab6 ("net: ngbe: Initialize sw info and register netdev")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250412154927.25908-1-abdun.nihaal@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rename the "data" variable inside msi_wmi_platform_read() to avoid
a name collision when the driver adds support for a state container
struct (that is to be called "data" too) in the future.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Extend thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-awcc-support-v1-2-09a130ec4560@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some users report the Alienware m16 R1 models, support G-Mode. This was
manually verified by inspecting their ACPI tables.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-awcc-support-v1-1-09a130ec4560@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
First get the devtype_data then check quirks.
Fixes: bbdffb341498 ("can: rockchip_canfd: add quirk for broken CAN-FD support")
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250324114416.10160-1-o451686892@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Like other protocols on top of AF_CAN family, also j1939_proto.inuse_idx
needs to be decremented on socket dismantle.
Fixes: 6bffe88452db ("can: add protocol counter for AF_CAN sockets")
Reported-by: Oliver Hartkopp <socketcan@hartkopp.net>
Closes: https://lore.kernel.org/linux-can/7e35b13f-bbc4-491e-9081-fb939e1b8df0@hartkopp.net/
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/09ce71f281b9e27d1e3d1104430bf3fceb8c7321.1742292636.git.dcaratti@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
It's not safe to access nla_len(ovs_key) if the data is smaller than
the netlink header. Check that the attribute is OK first.
Fixes: ccb1352e76cf ("net: Add Open vSwitch kernel components.")
Reported-by: syzbot+b07a9da40df1576b8048@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b07a9da40df1576b8048
Tested-by: syzbot+b07a9da40df1576b8048@syzkaller.appspotmail.com
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250412104052.2073688-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
igc: Fix PTM timeout
Christopher S M Hall says:
There have been sporadic reports of PTM timeouts using i225/i226 devices
These timeouts have been root caused to:
1) Manipulating the PTM status register while PTM is enabled
and triggered
2) The hardware retrying too quickly when an inappropriate response
is received from the upstream device
The issue can be reproduced with the following:
$ sudo phc2sys -R 1000 -O 0 -i tsn0 -m
Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
quickly reproduce the issue.
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
The first patch in this series also resolves an issue reported by Corinna
Vinschen relating to kdump:
This patch also fixes a hang in igc_probe() when loading the igc
driver in the kdump kernel on systems supporting PTM.
The igc driver running in the base kernel enables PTM trigger in
igc_probe(). Therefore the driver is always in PTM trigger mode,
except in brief periods when manually triggering a PTM cycle.
When a crash occurs, the NIC is reset while PTM trigger is enabled.
Due to a hardware problem, the NIC is subsequently in a bad busmaster
state and doesn't handle register reads/writes. When running
igc_probe() in the kdump kernel, the first register access to a NIC
register hangs driver probing and ultimately breaks kdump.
With this patch, igc has PTM trigger disabled most of the time,
and the trigger is only enabled for very brief (10 - 100 us) periods
when manually triggering a PTM cycle. Chances that a crash occurs
during a PTM trigger are not zero, but extremly reduced.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: add lock preventing multiple simultaneous PTM transactions
igc: cleanup PTP module if probe fails
igc: handle the IGC_PTP_ENABLED flag correctly
igc: move ktime snapshot into PTM retry loop
igc: increase wait time before retrying PTM
igc: fix PTM cycle trigger logic
====================
Link: https://patch.msgid.link/20250411162857.2754883-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I have done quite some review on hugetlb code over the years, and some
work on it as well, the latest being the hugetlb pagewalk unification
which is a work in progress, and touches hugetlb code to great lengths.
HugeTLB does not have many reviewers, so I would like to help out by
offering myself as an official Reviewer.
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Link: https://lkml.kernel.org/r/20250409082452.269180-1-osalvador@suse.de
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We started generating C code for OvS a while back, but actually
C codegen only supports fixed headers specified at the family
level right now (schema also allows specifying them per op).
ovs_flow and ovs_datapath already specify the fixed header
at the family level but ovs_vport does it per op.
Move the property, all ops use the same header.
This ensures YNL C sees the correct hdr_len:
const struct ynl_family ynl_ovs_vport_family = {
.name = "ovs_vport",
- .hdr_len = sizeof(struct genlmsghdr),
+ .hdr_len = sizeof(struct genlmsghdr) + sizeof(struct ovs_header),
};
Fixes: 7c59c9c8f202 ("tools: ynl: generate code for ovs families")
Link: https://patch.msgid.link/20250409145541.580674-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lockdep found the following dependency:
&dev_instance_lock_key#3 -->
&rdev->wiphy.mtx -->
&net->xdp.lock -->
&xs->mutex -->
&dev_instance_lock_key#3
The first dependency is the problem. wiphy mutex should be outside
the instance locks. The problem happens in notifiers (as always)
for CLOSE. We only hold the instance lock for ops locked devices
during CLOSE, and WiFi netdevs are not ops locked. Unfortunately,
when we dev_close_many() during netns dismantle we may be holding
the instance lock of _another_ netdev when issuing a CLOSE for
a WiFi device.
Lockdep's "Possible unsafe locking scenario" only prints 3 locks
and we have 4, plus I think we'd need 3 CPUs, like this:
CPU0 CPU1 CPU2
---- ---- ----
lock(&xs->mutex);
lock(&dev_instance_lock_key#3);
lock(&rdev->wiphy.mtx);
lock(&net->xdp.lock);
lock(&xs->mutex);
lock(&rdev->wiphy.mtx);
lock(&dev_instance_lock_key#3);
Tho, I don't think that's possible as CPU1 and CPU2 would
be under rtnl_lock. Even if we have per-netns rtnl_lock and
wiphy can span network namespaces - CPU0 and CPU1 must be
in the same netns to see dev_instance_lock, so CPU0 can't
be installing a socket as CPU1 is tearing the netns down.
Regardless, our expected lock ordering is that wiphy lock
is taken before instance locks, so let's fix this.
Go over the ops locked and non-locked devices separately.
Note that calling dev_close_many() on an empty list is perfectly
fine. All processing (including RCU syncs) are conditional
on the list not being empty, already.
Fixes: 7e4d784f5810 ("net: hold netdev instance lock during rtnetlink operations")
Reported-by: syzbot+6f588c78bf765b62b450@syzkaller.appspotmail.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250412233011.309762-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull rdma fixes from Jason Gunthorpe:
- Fix hang in bnxt_re due to miscomputing the budget
- Avoid a -Wformat-security message in dev_set_name()
- Avoid an unused definition warning in fs.c with some kconfigs
- Fix error handling in usnic and remove IS_ERR_OR_NULL() usage
- Regression in RXE support foudn by blktests due to missing ODP
exclusions
- Set the dma_segment_size on HNS so it doesn't corrupt DMA when using
very large IOs
- Move a INIT_WORK to near when the work is allocated in cm.c to fix a
racey crash where work in progress was being init'd
- Use __GFP_NOWARN to not dump in kvcalloc() if userspace requests a
very big MR
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/bnxt_re: Remove unusable nq variable
RDMA/core: Silence oversized kvmalloc() warning
RDMA/cma: Fix workqueue crash in cma_netevent_work_handler
RDMA/hns: Fix wrong maximum DMA segment size
RDMA/rxe: Fix null pointer dereference in ODP MR check
RDMA/mlx5: Fix compilation warning when USER_ACCESS isn't set
RDMA/usnic: Fix passing zero to PTR_ERR in usnic_ib_pci_probe()
RDMA/ucaps: Avoid format-security warning
RDMA/bnxt_re: Fix budget handling of notification queue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix NULL pointer dereference in virtiofs
- Fix slab OOB access in hfs/hfsplus
- Only create /proc/fs/netfs when CONFIG_PROC_FS is set
- Fix getname_flags() to initialize pointer correctly
- Convert dentry flags to enum
- Don't allow datadir without lowerdir in overlayfs
- Use namespace_{lock,unlock} helpers in dissolve_on_fput() instead of
plain namespace_sem so unmounted mounts are properly cleaned up
- Skip unnecessary ifs_block_is_uptodate check in iomap
- Remove an unused forward declaration in overlayfs
- Fix devpts uid/gid handling after converting to the new mount api
- Fix afs_dynroot_readdir() to not use the RCU read lock
- Fix mount_setattr() and open_tree_attr() to not pointlessly do path
lookup or walk the mount tree if no mount option change has been
requested
* tag 'vfs-6.15-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: use namespace_{lock,unlock} in dissolve_on_fput()
iomap: skip unnecessary ifs_block_is_uptodate check
fs: Fix filename init after recent refactoring
netfs: Only create /proc/fs/netfs with CONFIG_PROC_FS
mount: ensure we don't pointlessly walk the mount tree
dcache: convert dentry flag macros to enum
afs: Fix afs_dynroot_readdir() to not use the RCU read lock
hfs/hfsplus: fix slab-out-of-bounds in hfs_bnode_read_key
virtiofs: add filesystem context source name check
devpts: Fix type for uid and gid params
ovl: remove unused forward declaration
ovl: don't allow datadir only
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A couple of fixes and the usual tooling header updates:
- fix a build error on ARM64 when libunwind is requested
- fix an infinite loop with branch stack on AMD Zen3
- sync tooling headers with the kernel source"
* tag 'perf-tools-fixes-for-v6.15-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf tools: Remove evsel__handle_error_quirks()
perf libunwind arm64: Fix missing close parens in an if statement
tools headers: Update the arch/x86/lib/memset_64.S copy with the kernel sources
tools headers: Update the x86 headers with the kernel sources
tools headers: Update the linux/unaligned.h copy with the kernel sources
tools headers: Update the uapi/asm-generic/mman-common.h copy with the kernel sources
tools headers: Update the uapi/linux/prctl.h copy with the kernel sources
tools headers: Update the syscall table with the kernel sources
tools headers: Update the VFS headers with the kernel sources
tools headers: Update the uapi/linux/perf_event.h copy with the kernel sources
tools headers: Update the socket headers with the kernel sources
tools headers: Update the KVM headers with the kernel sources
|
|
ktest recently reported crashes while running several buffered io tests
with __alloc_tagging_slab_alloc_hook() at the top of the crash call stack.
The signature indicates an invalid address dereference with low bits of
slab->obj_exts being set. The bits were outside of the range used by
page_memcg_data_flags and objext_flags and hence were not masked out
by slab_obj_exts() when obtaining the pointer stored in slab->obj_exts.
The typical crash log looks like this:
00510 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
00510 Mem abort info:
00510 ESR = 0x0000000096000045
00510 EC = 0x25: DABT (current EL), IL = 32 bits
00510 SET = 0, FnV = 0
00510 EA = 0, S1PTW = 0
00510 FSC = 0x05: level 1 translation fault
00510 Data abort info:
00510 ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000
00510 CM = 0, WnR = 1, TnD = 0, TagAccess = 0
00510 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
00510 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000104175000
00510 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
00510 Internal error: Oops: 0000000096000045 [#1] SMP
00510 Modules linked in:
00510 CPU: 10 UID: 0 PID: 7692 Comm: cat Not tainted 6.15.0-rc1-ktest-g189e17946605 #19327 NONE
00510 Hardware name: linux,dummy-virt (DT)
00510 pstate: 20001005 (nzCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00510 pc : __alloc_tagging_slab_alloc_hook+0xe0/0x190
00510 lr : __kmalloc_noprof+0x150/0x310
00510 sp : ffffff80c87df6c0
00510 x29: ffffff80c87df6c0 x28: 000000000013d1ff x27: 000000000013d200
00510 x26: ffffff80c87df9e0 x25: 0000000000000000 x24: 0000000000000001
00510 x23: ffffffc08041953c x22: 000000000000004c x21: ffffff80c0002180
00510 x20: fffffffec3120840 x19: ffffff80c4821000 x18: 0000000000000000
00510 x17: fffffffec3d02f00 x16: fffffffec3d02e00 x15: fffffffec3d00700
00510 x14: fffffffec3d00600 x13: 0000000000000200 x12: 0000000000000006
00510 x11: ffffffc080bb86c0 x10: 0000000000000000 x9 : ffffffc080201e58
00510 x8 : ffffff80c4821060 x7 : 0000000000000000 x6 : 0000000055555556
00510 x5 : 0000000000000001 x4 : 0000000000000010 x3 : 0000000000000060
00510 x2 : 0000000000000000 x1 : ffffffc080f50cf8 x0 : ffffff80d801d000
00510 Call trace:
00510 __alloc_tagging_slab_alloc_hook+0xe0/0x190 (P)
00510 __kmalloc_noprof+0x150/0x310
00510 __bch2_folio_create+0x5c/0xf8
00510 bch2_folio_create+0x2c/0x40
00510 bch2_readahead+0xc0/0x460
00510 read_pages+0x7c/0x230
00510 page_cache_ra_order+0x244/0x3a8
00510 page_cache_async_ra+0x124/0x170
00510 filemap_readahead.isra.0+0x58/0xa0
00510 filemap_get_pages+0x454/0x7b0
00510 filemap_read+0xdc/0x418
00510 bch2_read_iter+0x100/0x1b0
00510 vfs_read+0x214/0x300
00510 ksys_read+0x6c/0x108
00510 __arm64_sys_read+0x20/0x30
00510 invoke_syscall.constprop.0+0x54/0xe8
00510 do_el0_svc+0x44/0xc8
00510 el0_svc+0x18/0x58
00510 el0t_64_sync_handler+0x104/0x130
00510 el0t_64_sync+0x154/0x158
00510 Code: d5384100 f9401c01 b9401aa3 b40002e1 (f8227881)
00510 ---[ end trace 0000000000000000 ]---
00510 Kernel panic - not syncing: Oops: Fatal exception
00510 SMP: stopping secondary CPUs
00510 Kernel Offset: disabled
00510 CPU features: 0x0000,000000e0,00000410,8240500b
00510 Memory Limit: none
Investigation indicates that these bits are already set when we allocate
slab page and are not zeroed out after allocation. We are not yet sure
why these crashes start happening only recently but regardless of the
reason, not initializing a field that gets used later is wrong. Fix it
by initializing slab->obj_exts during slab page allocation.
Fixes: 21c690a349ba ("mm: introduce slabobj_ext to support slab object extensions")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250411155737.1360746-1-surenb@google.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Prior to commit e614a00117bc2d, xmbuf_map_backing_mem relied on
folio_file_page to return the base page for the xmbuf's loff_t in the
xfile, and set b_addr to the page_address of that base page.
Now that folio_file_page has been removed from xmbuf_map_backing_mem, we
always set b_addr to the folio_address of the folio. This is correct
for the situation where the folio size matches the buffer size, but it's
totally wrong if tmpfs uses large folios. We need to use
offset_in_folio here.
Found via xfs/801, which demonstrated evidence of corruption of an
in-memory rmap btree block right after initializing an adjacent block.
Fixes: e614a00117bc2d ("xfs: cleanup mapping tmpfs folios into the buffer cache")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Presently we start garbage collection late - when we start running
out of free zones to backfill max_open_zones. This is a reasonable
default as it minimizes write amplification. The longer we wait,
the more blocks are invalidated and reclaim cost less in terms
of blocks to relocate.
Starting this late however introduces a risk of GC being outcompeted
by user writes. If GC can't keep up, user writes will be forced to
wait for free zones with high tail latencies as a result.
This is not a problem under normal circumstances, but if fragmentation
is bad and user write pressure is high (multiple full-throttle
writers) we will "bottom out" of free zones.
To mitigate this, introduce a zonegc_low_space tunable that lets the
user specify a percentage of how much of the unused space that GC
should keep available for writing. A high value will reclaim more of
the space occupied by unused blocks, creating a larger buffer against
write bursts.
This comes at a cost as write amplification is increased. To
illustrate this using a sample workload, setting zonegc_low_space to
60% avoids high (500ms) max latencies while increasing write
amplification by 15%.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
xfs_buf_free can call vunmap, which can sleep. The vunmap path is an
unlikely one, so add might_sleep to ensure calling xfs_buf_free from
atomic context gets caught more easily.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Marking a log item as failed kept a buffer reference around for
resubmission of inode and dquote items.
For inode items commit 298f7bec503f3 ("xfs: pin inode backing buffer to
the inode log item") started pinning the inode item buffers
unconditionally and removed the need for this. Later commit acc8f8628c37
("xfs: attach dquot buffer to dquot log item buffer") did the same for
dquot items but didn't fully clean up the xfs_clear_li_failed side
for them. Stop adding the extra pin for dquot items and remove the
helpers.
This happens to fix a call to xfs_buf_free with the AIL lock held,
which would be incorrect for the unlikely case freeing the buffer
ends up calling vfree.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Properly handle errors when file-backed I/O fails
- Fix compilation issues on ARM platform (arm-linux-gnueabi)
- Fix parsing of encoded extents
- Minor cleanup
* tag 'erofs-for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: remove duplicate code
erofs: fix encoded extents handling
erofs: add __packed annotation to union(__le16..)
erofs: set error to bio if file-backed IO fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A few more miscellaneous ext4 bug fixes and cleanups including some
syzbot failures and fixing a stale file handing refeencing an inode
previously used as a regular file, but which has been deleted and
reused as an ea_inode would result in ext4 erroneously considering
this a case of fs corruption"
* tag 'ext4_for_linus-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off-by-one error in do_split
ext4: make block validity check resistent to sb bh corruption
ext4: avoid -Wflex-array-member-not-at-end warning
Documentation: ext4: Add fields to ext4_super_block documentation
ext4: don't treat fhandle lookup of ea_inode as FS corruption
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix build of memblock test.
Add missing stubs for mutex and free_reserved_area() to memblock
tests"
* tag 'fixes-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: Fix mutex related build error
|
|
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154
make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455
ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796
ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431
vfs_symlink+0x137/0x2e0 fs/namei.c:4615
do_symlinkat+0x222/0x3a0 fs/namei.c:4641
__do_sys_symlink fs/namei.c:4662 [inline]
__se_sys_symlink fs/namei.c:4660 [inline]
__x64_sys_symlink+0x7a/0x90 fs/namei.c:4660
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 5872331b3d91 ("ext4: fix potential negative array index in do_split()")
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250404082804.2567-3-a.sadovnikov@ispras.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
Suggested-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/0c06bc9ebfcd6ccfed84a36e79147bf45ff5adc1.1743142920.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
fs/ext4/mballoc.c:3041:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/Z-SF97N3AxcIMlSi@kspp
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Documentation and implementation of the ext4 super block have
slightly diverged: Padding has been removed in order to make room for
new fields that are still missing in the documentation.
Add the new fields s_encryption_level, s_first_error_errorcode,
s_last_error_errorcode to the documentation of the ext4 super block.
Fixes: f542fbe8d5e8 ("ext4 crypto: reserve codepoints used by the ext4 encryption feature")
Fixes: 878520ac45f9 ("ext4: save the error code which triggered an ext4_error() in the superblock")
Signed-off-by: Tom Vierjahn <tom.vierjahn@acm.org>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20250324221004.5268-1-tom.vierjahn@acm.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
|
|
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
|
|
When rv_is_container_monitor() is called on the last monitor in
rv_monitors_list, KASAN yells:
BUG: KASAN: global-out-of-bounds in rv_is_container_monitor+0x101/0x110
Read of size 8 at addr ffffffff97c7c798 by task setup/221
The buggy address belongs to the variable:
rv_monitors_list+0x18/0x40
This is due to list_next_entry() is called on the last entry in the list.
It wraps around to the first list_head, and the first list_head is not
embedded in struct rv_monitor_def.
Fix it by checking if the monitor is last in the list.
Cc: stable@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Fixes: cb85c660fcd4 ("rv: Add option for nested monitors and include sched")
Link: https://lore.kernel.org/e85b5eeb7228bfc23b8d7d4ab5411472c54ae91b.1744355018.git.namcao@linutronix.de
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The retval and retaddr options for function_graph tracer will add a
comment at the end of a function for both leaf and non leaf functions that
looks like:
__wake_up_common(); /* ret=0x1 */
} /* pick_next_task_fair ret=0x0 */
The function print_graph_retval() adds a newline after the "*/". But if
that's not called, the caller function needs to make sure there's a
newline added.
This is confusing and when the function parameters code was added, it
added a newline even when calling print_graph_retval() as the fact that
the print_graph_retval() function prints a newline isn't obvious.
This caused an extra newline to be printed and that made it fail the
selftests when the retval option was set, as the selftests were not
expecting blank lines being injected into the trace.
Instead of having print_graph_retval() print a newline, just have the
caller always print the newline regardless if it calls print_graph_retval()
or not. This not only fixes this bug, but it also simplifies the code.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250411133015.015ca393@gandalf.local.home
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/ccc40f2b-4b9e-4abd-8daf-d22fce2a86f0@sirena.org.uk/
Fixes: ff5c9c576e754 ("ftrace: Add support for function argument to graph tracer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"A set of fixes for pwm core and various drivers
The first three patches handle clk_get_rate() returning 0 (which might
happen for example if the CCF is disabled). The first of these was
found because this triggered a warning with clang, the two others by
looking for similar issues in other drivers.
The remaining three fixes address issues in the new waveform pwm API.
Now that I worked on this a bit more, the finer details and corner
cases are better understood and the code is fixed accordingly"
* tag 'pwm/for-6.15-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: axi-pwmgen: Let .round_waveform_tohw() signal when request was rounded up
pwm: stm32: Search an appropriate duty_cycle if period cannot be modified
pwm: Let pwm_set_waveform() succeed even if lowlevel driver rounded up
pwm: fsl-ftm: Handle clk_get_rate() returning 0
pwm: rcar: Improve register calculation
pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()
|
|
When operating with multiple devices grouped together, the firmware stores
data related to the state machine of each partner device in the MLO global
memory region. If the firmware crashes, it updates the state to 'crashed'.
During recovery, this memory is shared with the firmware again, and upon
detecting the 'crashed' state, it reasserts. This leads to a loop of
firmware asserts and it never recovers.
Hence to fix this issue, once all devices in the group have been asserted
and powered down, reset the MLO global memory region.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-9-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, in ath12k_core_reset(), the device is powered up immediately
after a power down. However, with hardware grouping, when one device
asserts, all partner devices also asserts. If there is a delay in
processing these asserts, by the time this device powers up, other devices
might still be asserting, leading to an overall recovery failure.
To prevent this issue, ensure all asserts for a group are processed before
initiating the power-up sequence.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-8-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, when ath12k_core_restart() is called and the ab->is_reset flag
is set, it invokes ieee80211_restart_hw() for all hardware in the same
group. However, other hardware might still be in the recovery process,
making this call inappropriate with grouping into picture.
To address this, add a condition to check if the group is ready. If the
group is not ready, do not call ieee80211_restart_hw().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-7-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, ath12k_core_pre_reconfigure_recovery() reconfigures all radios
within the same group. During grouping and driver going for a recovery,
this function is called as many times as there are devices in the group.
Consequently, it performs the same reconfiguration multiple times, which
is unnecessary.
To prevent this, add a check to continue if the action has already been
taken.
To simplify the management of various flags, the reason for hardware queues
being stopped is used as a check instead of introducing a new flag.
While at it, also add missing wiphy locks. Wiphy lock is required since
ath12k_mac_drain_tx() which is called by
ath12k_core_pre_reconfigure_recovery() needs this lock to be held by the
caller.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-6-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
At present, during PCI shutdown, the power down is only executed for a
single device. However, when operating in a group, all devices need to be
powered down simultaneously. Failure to do so will result in a firmware
assertion.
Hence, introduce a new ath12k_pci_hw_group_power_down() and call it during
power down. This will ensure that all partner devices are properly powered
down.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-5-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Commit a5686ae820fa ("wifi: ath12k: move ATH12K_FLAG_REGISTERED handling to
ath12k_mac_register()") relocated the setting of the ATH12K_FLAG_REGISTERED
flag to the ath12k_mac_register() function. However, this function only
accesses the first device (ab) via ag->ab[0], resulting in the flag being
set only for the first device in the group. Similarly,
ath12k_mac_unregister() only unsets the flag for the first device. The flag
should actually be set for all devices in the group to avoid issues during
recovery.
Hence, move setting and clearing of this flag in the function
ath12k_core_hw_group_start() and ath12k_core_hw_group_stop() respectively.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: a5686ae820fa ("wifi: ath12k: move ATH12K_FLAG_REGISTERED handling to ath12k_mac_register()")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-4-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
grouping
With hardware grouping, during reboot, whenever a device is removed, it
powers down itself and all its partner devices in the same group. Now this
is done by all devices and hence there is multiple power down for devices
and hence the following error messages can be seen:
ath12k_pci 0002:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0)
ath12k_pci 0002:01:00.0: failed to set mhi state: POWER_OFF(3)
ath12k_pci 0002:01:00.0: failed to set mhi state DEINIT(1) in current mhi state (0x0)
ath12k_pci 0002:01:00.0: failed to set mhi state: DEINIT(1)
ath12k_pci 0003:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0)
ath12k_pci 0003:01:00.0: failed to set mhi state: POWER_OFF(3)
ath12k_pci 0003:01:00.0: failed to set mhi state DEINIT(1) in current mhi state (0x0)
ath12k_pci 0003:01:00.0: failed to set mhi state: DEINIT(1)
ath12k_pci 0004:01:00.0: failed to set mhi state POWER_OFF(3) in current mhi state (0x0)
ath12k_pci 0004:01:00.0: failed to set mhi state: POWER_OFF(3)
To prevent this, check if the ATH12K_PCI_FLAG_INIT_DONE flag is already
set before powering down. If it is set, it indicates that another partner
device has already performed the power down, and this device can skip this
step.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-3-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, driver does not manage reference counting for attaching and
detaching cores to/from hardware groups. This can lead to issues when
multiple cores are involved. Or with same core, attach/detach is called
multiple times back to back.
Fix this issue by using reference counting.
With that, it is now ensured that the core is properly attached or detached
from the hardware group and even back to back calls will not alter the
count.
Additionally, add some debug logs during the attachment and detachment
events for better debugging and tracking.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-2-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
During rmmod of ath12k module with SLUB debug enabled, following print is
seen -
=============================================================================
BUG kmalloc-1k (Not tainted): Object already free
-----------------------------------------------------------------------------
Allocated in ath12k_reg_build_regd+0x94/0xa20 [ath12k] age=10470 cpu=0 pid=0
__kmalloc_noprof+0xf4/0x368
ath12k_reg_build_regd+0x94/0xa20 [ath12k]
ath12k_wmi_op_rx+0x199c/0x2c14 [ath12k]
ath12k_htc_rx_completion_handler+0x398/0x554 [ath12k]
ath12k_ce_per_engine_service+0x248/0x368 [ath12k]
ath12k_pci_ce_workqueue+0x28/0x50 [ath12k]
process_one_work+0x14c/0x28c
bh_worker+0x22c/0x27c
workqueue_softirq_action+0x80/0x90
tasklet_action+0x14/0x3c
handle_softirqs+0x108/0x240
__do_softirq+0x14/0x20
Freed in ath12k_reg_free+0x40/0x74 [ath12k] age=136 cpu=2 pid=166
kfree+0x148/0x248
ath12k_reg_free+0x40/0x74 [ath12k]
ath12k_core_hw_group_destroy+0x68/0xac [ath12k]
ath12k_core_deinit+0xd8/0x124 [ath12k]
ath12k_pci_remove+0x6c/0x130 [ath12k]
pci_device_remove+0x44/0xe8
device_remove+0x4c/0x80
device_release_driver_internal+0x1d0/0x22c
driver_detach+0x50/0x98
bus_remove_driver+0x70/0xf4
driver_unregister+0x30/0x60
pci_unregister_driver+0x24/0x9c
ath12k_pci_exit+0x18/0x24 [ath12k]
__arm64_sys_delete_module+0x1a0/0x2a8
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
Slab 0xfffffdffc0033600 objects=10 used=6 fp=0xffff000000cdcc00 flags=0x3fffe0000000240(workingset|head|node=0|zone=0|lastcpupid=0x1ffff)
Object 0xffff000000cdcc00 @offset=19456 fp=0xffff000000cde400
[...]
This issue arises because in ath12k_core_hw_group_destroy(), each device
calls ath12k_core_soc_destroy() for itself and all its partners within the
same group. Since ath12k_core_hw_group_destroy() is invoked for each
device, this results in a double free condition, eventually causing the
SLUB bug.
To resolve this, set the freed pointers to NULL. And since there could be
a race condition to read these pointers, guard these with the available
mutex lock.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 6f245ea0ec6c ("wifi: ath12k: introduce device group abstraction")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250408-fix_reboot_issues_with_hw_grouping-v4-1-95e7bf048595@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
If the user tries to write more than 32 bytes then it results in memory
corruption. Fortunately, this is debugfs so it's limited to root users.
Fixes: 3f73c24f28b3 ("wifi: ath12k: Add support to enable debugfs_htt_stats")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/35daefbd-d493-41d9-b192-96177d521b40@stanley.mountain
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The devm_memremap() function returns error pointers on error and the
ioremap() function returns NULL on error. The error checking here got
those flipped around.
Fixes: c01d5cc9b9fe ("wifi: ath12k: Power up userPD")
Fixes: 6cee30f0da75 ("wifi: ath12k: add AHB driver support for IPQ5332")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/937abc74-9648-4c05-a2c3-8db408b3ed9e@stanley.mountain
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The use of of_property_read_u32() isn't really correct as
"memory-region" contains phandles (though those happen to be u32s. As
it is just testing for property presence, use of_property_present()
instead.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250408190211.2505737-2-robh@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Incorrect WMI tag is used for EHT rate update from host to firmware
while encoding peer assoc WMI.
Correct the WMI tag used for EHT rate update from WMI_TAG_HE_RATE_SET
to the proper tag. This ensures firmware does not mistakenly update HE rate during parsing.
Found during code review. Compile tested only.
Fixes: 5b70ec6036c1 ("wifi: ath12k: add WMI support for EHT peer")
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Link: https://patch.msgid.link/20250409152341.944628-1-ramya.gnanasekar@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Currently, the AP does not support the broadcast target wake time (TWT)
feature. Therefore, disable the broadcast TWT feature in the HE MAC
capabilities element field.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Thomas Wu <quic_wthomas@quicinc.com>
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250409053830.4039467-1-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
ath12k_mac_op_tx()
Currently, ahvif->key_cipher is compared with the enum value
(WMI_CIPHER_NONE) inside ath12k_mac_op_tx(). However, ahvif->key_cipher is
set using the macro value WLAN_CIPHER_SUITE_XXXX which seems inconsistent.
To improve code consistency and readability, introduce check against zero
for ahvif->key_cipher instead of comparing it with the enum
(WMI_CIPHER_NONE).
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aaradhana Sahu <aaradhana.sahu@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250403082207.3323938-3-aaradhana.sahu@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
