summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-02-12ice: fix and consolidate logging of NVM/firmware version informationBruce Allan
Logging the firmware/NVM information during driver load is redundant since that information is also available via ethtool. Move the functionality found in ice_nvm_version_str() directly into ice_get_drvinfo() and remove calling the former and logging that info during driver probe. This also gets rid of a bug in ice_nvm_version_str() where it returns a pointer to a buffer which is free'ed when that function exits. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Modify link message loggingAkeem G Abodunrin
This patch modifies link message logging to include "Full Duplex" and "Negotiated" for FEC, so as to distinguish it from "Requested" FEC. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove CONFIG_PCI_IOV wrap in ice_set_pf_capsAnirudh Venkataramanan
Remove unnecessary CONFIG_PCI_IOV wrapping in ice_set_pf_caps. None of the data structures accessed within the block are wrapped with this flag. When CONFIG_PCI_IOV is undefined, pf->num_vfs_supported will be 0 anyway. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Remove ice_dev_onetime_setup()Brett Creeley
ice_dev_onetime_setup contains driver workarounds needed for firmware limitations. These issues have now been resolved in newer NVMs so remove the function. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Don't allow same value for Rx tail to be written twiceBrett Creeley
Currently we compare the value we are about to write to the Rx tail register with the previous value of next_to_use. The problem with this is we only write tail on 8 descriptor boundaries, but next_to_use is updated whenever we clean Rx descriptors. Fix this by comparing the value we are about to write to tail with the previously written tail value. This will prevent duplicate Rx tail bumps. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: display supported and advertised link modesPaul Greenwalt
Display all of the supported and advertised link modes based on the PHY capability with media. Displaying all supported modes is more informative then only displaying the current link mode. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Fix switch between FW and SW LLDPDave Ertman
When switching between FW and SW LLDP mode, the number of configured TLV apps in the driver's DCB configuration is getting out of synch with what lldpad thinks is configured. This is causing a problem when shutting down lldpad. The cleanup is trying to delete TLV apps that are not defined in the kernel. Since the driver is keeping an accurate account of the apps defined, use the drivers number of apps to determine if there is an app to delete. If the number of apps is <= 1, then do not attempt to delete. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12ice: Fix DCB rebuild after resetDave Ertman
The function ice_dcb_rebuild had some logic flaws in it, and also didn't differentiate between FW and SW modes needs. For FW flow, the willing setting was being forced to OFF and left that way. Unwilling in DCB FW mode is not a supported model. Leave the config alone and use the return value from the set command to determine if setting the config was successful. The SW DCB flow does not need to need to register for MIB change events (as they are not used in SW mode). Use !is_sw_lldp checks to only perform FW specific task while in FW mode. Also adding a reapplication of the current DCB config after a link event. Some NVMs are not maintaining their DCB configs across link events. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-12docs: virt: guest-halt-polling.txt convert to ReSTMauro Carvalho Chehab
Due to some merge conflict, this file ended being alone under Documentation/virtual. The file itself is almost at ReST format. Just minor adjustments are needed: - Adjust title markup; - Adjust a list identation; - add a literal block markup; - Add some blank lines. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: review-checklist.txt: rename to ReSTMauro Carvalho Chehab
This file is already in ReST compatible format. So, rename it and add to the kvm's index.rst. While here, use the standard conversion for document titles. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert timekeeping.txt to ReST formatMauro Carvalho Chehab
- Use document title and chapter markups; - Add markups for literal blocks; - Add markups for tables; - use :field: for field descriptions; - Add blank lines and adjust indentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert s390-diag.txt to ReST formatMauro Carvalho Chehab
This file is almost in ReST format. Just one change was needed: - Add markups for a literal block and change its indentation. While here, use the standard markup for the document title. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert ppc-pv.txt to ReST formatMauro Carvalho Chehab
- Use document title and chapter markups; - Add markups for tables; - Use list markups; - Add markups for literal blocks; - Add blank lines. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert nested-vmx.txt to ReST formatMauro Carvalho Chehab
This file is almost in ReST format. Just a small set of changes were needed: - Add markups for lists; - Add markups for a literal block; - Adjust whitespaces. While here, use the standard markup for the document title. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert mmu.txt to ReST formatMauro Carvalho Chehab
- Use document title and chapter markups; - Add markups for tables; - Add markups for literal blocks; - Add blank lines and adjust indentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert locking.txt to ReST formatMauro Carvalho Chehab
- Use document title and chapter markups; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert hypercalls.txt to ReST formatMauro Carvalho Chehab
- Use document title and chapter markups; - Convert tables; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: arm/psci.txt: convert to ReSTMauro Carvalho Chehab
- Add a title for the document; - Adjust whitespaces for it to be properly formatted after parsed. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert arm/hyp-abi.txt to ReSTMauro Carvalho Chehab
- Add proper markups for titles; - Adjust whitespaces and blank lines to match ReST needs; - Mark literal blocks as such. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: Convert api.txt to ReST formatMauro Carvalho Chehab
convert api.txt document to ReST format while trying to keep its format as close as possible with the authors intent, and avoid adding uneeded markups. - Use document title and chapter markups; - Convert tables; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/xive.txt to ReSTMauro Carvalho Chehab
- Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - mark code blocks as such. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/xics.txt to ReSTMauro Carvalho Chehab
- Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - use :field: markups. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/vm.txt to ReSTMauro Carvalho Chehab
- Use title markups; - adjust indentation and add blank lines as needed; - use :field: markups; - Use cross-references; - mark code blocks as such. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/vfio.txt to ReSTMauro Carvalho Chehab
- Use standard title markup; - adjust lists; - mark code blocks as such. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/vcpu.txt to ReSTMauro Carvalho Chehab
- Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - use :field: markups; - mark code blocks as such. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/s390_flic.txt to ReSTMauro Carvalho Chehab
- Use standard markup for document title; - Adjust indentation and add blank lines as needed; - use the notes markup; - mark code blocks as such. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/mpic.txt to ReSTMauro Carvalho Chehab
This document is almost in ReST format. The only thing needed is to mark a list as such and to add an extra whitespace. Yet, let's also use the standard document title markup, as it makes easier if anyone wants later to add sessions to it. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: convert devices/arm-vgit.txt to ReSTMauro Carvalho Chehab
- Use title markups; - change indent to match ReST syntax; - use proper table markups; - use literal block markups. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: devices/arm-vgit-v3.txt to ReSTMauro Carvalho Chehab
- Use title markups; - change indent to match ReST syntax; - use proper table markups; - use literal block markups. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: devices/arm-vgic-its.txt to ReST formatMauro Carvalho Chehab
- Fix document title to match ReST format - Convert the table to be properly recognized - use proper markups for literal blocks - Some indentation fixes to match ReST While here, add an index for kvm devices. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: virt: Convert msr.txt to ReST formatMauro Carvalho Chehab
- Use document title markup; - Convert tables; - Add blank lines and adjust indentation. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: virt: convert halt-polling.txt to ReST formatMauro Carvalho Chehab
- Fix document title to match ReST format - Convert the table to be properly recognized - Some indentation fixes to match ReST syntax. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: virt: user_mode_linux.rst: fix URL referencesMauro Carvalho Chehab
Several URLs are pointing to outdated places. Update the references for the URLs whose contents still exists, removing the others. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: virt: user_mode_linux.rst: update compiling instructionsMauro Carvalho Chehab
Instead of pointing for a pre-2.4 and a seaparate patch, update it to match current upstream, as UML was merged a long time ago. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: virt: convert UML documentation to ReSTMauro Carvalho Chehab
Despite being an old document, it contains lots of information that could still be useful. The document has a nice style with makes easy to convert to ReST. So, let's convert it to ReST. This patch does: - Use proper markups for titles; - Mark and proper indent literal blocks; - don't use an 'o' character for lists; - other minor changes required for the doc to be parsed. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12docs: kvm: add arm/pvtime.rst to index.rstMauro Carvalho Chehab
Add this file to a new kvm/arm index.rst, in order for it to be shown as part of the virt book. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: x86: fix WARN_ON check of an unsigned less than zeroPaolo Bonzini
The check cpu->hv_clock.system_time < 0 is redundant since system_time is a u64 and hence can never be less than zero. But what was actually meant is to check that the result is positive, since kernel_ns and v->kvm->arch.kvmclock_offset are both s64. Reported-by: Colin King <colin.king@canonical.com> Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Addresses-Coverity: ("Macro compares unsigned to 0") Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12selftests: KVM: Remove unused x86_register enumEric Auger
x86_register enum is not used, let's remove it. Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: x86/mmu: Fix struct guest_walker arrays for 5-level pagingSean Christopherson
Define PT_MAX_FULL_LEVELS as PT64_ROOT_MAX_LEVEL, i.e. 5, to fix shadow paging for 5-level guest page tables. PT_MAX_FULL_LEVELS is used to size the arrays that track guest pages table information, i.e. using a "max levels" of 4 causes KVM to access garbage beyond the end of an array when querying state for level 5 entries. E.g. FNAME(gpte_changed) will read garbage and most likely return %true for a level 5 entry, soft-hanging the guest because FNAME(fetch) will restart the guest instead of creating SPTEs because it thinks the guest PTE has changed. Note, KVM doesn't yet support 5-level nested EPT, so PT_MAX_FULL_LEVELS gets to stay "4" for the PTTYPE_EPT case. Fixes: 855feb673640 ("KVM: MMU: Add 5 level EPT & Shadow page table support.") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: nVMX: Use correct root level for nested EPT shadow page tablesSean Christopherson
Hardcode the EPT page-walk level for L2 to be 4 levels, as KVM's MMU currently also hardcodes the page walk level for nested EPT to be 4 levels. The L2 guest is all but guaranteed to soft hang on its first instruction when L1 is using EPT, as KVM will construct 4-level page tables and then tell hardware to use 5-level page tables. Fixes: 855feb673640 ("KVM: MMU: Add 5 level EPT & Shadow page table support.") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: nVMX: Fix some comment typos and coding styleMiaohe Lin
Fix some typos in the comments. Also fix coding style. [Sean Christopherson rewrites the comment of write_fault_to_shadow_pgtable field in struct kvm_vcpu_arch.] Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: x86/mmu: Avoid retpoline on ->page_fault() with TDPSean Christopherson
Wrap calls to ->page_fault() with a small shim to directly invoke the TDP fault handler when the kernel is using retpolines and TDP is being used. Single out the TDP fault handler and annotate the TDP path as likely to coerce the compiler into preferring it over the indirect function call. Rename tdp_page_fault() to kvm_tdp_page_fault(), as it's exposed outside of mmu.c to allow inlining the shim. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: apic: reuse smp_wmb() in kvm_make_request()Miaohe Lin
kvm_make_request() provides smp_wmb() so pending_events changes are guaranteed to be visible. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12KVM: x86: remove duplicated KVM_REQ_EVENT requestMiaohe Lin
The KVM_REQ_EVENT request is already made in kvm_set_rflags(). We should not make it again. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12selftests: KVM: SVM: Add vmcall testEric Auger
L2 guest calls vmcall and L1 checks the exit status does correspond. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Tested-by: Wei Huang <wei.huang2@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12selftests: KVM: AMD Nested test infrastructureEric Auger
Add the basic infrastructure needed to test AMD nested SVM. This is largely copied from the KVM unit test infrastructure. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12selftests: KVM: Replace get_{gdt,idt}_base() by get_{gdt,idt}()Eric Auger
get_gdt_base() and get_idt_base() only return the base address of the descriptor tables. Soon we will need to get the size as well. Change the prototype of those functions so that they return the whole desc_ptr struct instead of the address field. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Wei Huang <wei.huang2@amd.com> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12NFSv4: Fix revalidation of dentries with delegationsTrond Myklebust
If a dentry was not initially looked up while we were holding a delegation, then we do still need to revalidate that it still holds the same name. If there are multiple hard links to the same file, then all the hard links need validation. Reported-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Tested-by: Benjamin Coddington <bcodding@redhat.com> [Anna: Put nfs_unset_verifier_delegated() under CONFIG_NFS_V4] Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-02-12Merge tag 'kbuild-fixes-v5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix memory corruption in scripts/kallsyms - fix the vmlinux link stage to correctly update compile.h * tag 'kbuild-fixes-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: fix mismatch between .version and include/generated/compile.h scripts/kallsyms: fix memory corruption caused by write over-run
2020-02-12net: ethernet: ave: Add capability of rgmii-id modeKunihiko Hayashi
This allows you to specify the type of rgmii-id that will enable phy internal delay in ethernet phy-mode. This adds all RGMII cases to all of get_pinmode() except LD11, because LD11 SoC doesn't support RGMII due to the constraint of the hardware. When RGMII phy mode is specified in the devicetree for LD11, the driver will abort with an error. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 00:54:49 +0000