summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-20net: phy: execute genphy_loopback() per default on all PHYsOleksij Rempel
The generic loopback is really generic and is defined by the 802.3 standard, we should just mandate that drivers implement a custom loopback if the generic one cannot work. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net/mlx5: DR, Add support for isolate_vl_tc QPYevgeny Kliteynik
When using SW steering, rule insertion rate depends on the RDMA RC QP performance used for writing to the ICM. During stress this QP is competing on the HW resources with all the other QPs that are used to send data. To protect SW steering QP's performance in such cases, we set this QP to use isolated VL. The VL number is reserved by FW and is not exposed to the driver. Support for this QP on isolated VL exists only when both force-loopback and isolate_vl_tc capabilities are set. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5: DR, Add support for force-loopback QPYevgeny Kliteynik
When supported by the device, SW steering RoCE RC QP that is used to write/read to/from ICM will be created with force-loopback attribute. Such QP doesn't require GID index upon creation. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5: DR, Add support for matching tunnel GTP-UYevgeny Kliteynik
Enable matching on tunnel GTP-U and GTP-U first extension header using dynamic flex parser. Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5: DR, Set flex parser for TNL_MPLS dynamicallyYevgeny Kliteynik
Query the flex_parser id that's intended for TNL_MPLS and use an appropriate flex parser for MPLS over UDP/GRE. Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5: DR, Add support for matching on geneve TLV optionYevgeny Kliteynik
Enable matching on tunnel geneve TLV option using the flex parser. Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5: DR, Set STEv0 ICMP flex parser dynamicallyYevgeny Kliteynik
Set the flex parser ID dynamicly for ICMP instead of relying on hardcoded values. Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5: DR, Add support for dynamic flex parserYevgeny Kliteynik
Flex parser is a HW parser that can support protocols that are not natively supported by the HCA, such as Geneve (TLV options) and GTP-U. There are 8 such parsers, and each of them can be assigned to parse a specific set of protocols. This patch adds misc4 match params which allows using a correct flex parser that was programmed to the required protocol. Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5: DR, Remove protocol-specific flex_parser_3 definitionsMuhammad Sammar
Remove MPLS specific fields from flex parser 3 layout. Flex parser can be used for multiple protocols and should not be hardcoded to a specific type. Signed-off-by: Muhammad Sammar <muhammads@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5: mlx5_ifc updates for flex parserYevgeny Kliteynik
Added the required definitions for supporting more protocols by flex parsers (GTP-U, Geneve TLV options), and for using the right flex parser that was configured for this protocol. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5: E-Switch, Improve error messages in term table creationYevgeny Kliteynik
Add error code to the error messages and removed duplicated message: if termination table creation failed, we already get an error message in mlx5_eswitch_termtbl_create, so no need for the additional error print in the calling function. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5: DR, Fix SQ/RQ in doorbell bitmaskYevgeny Kliteynik
QP doorbell size is 16 bits. Fixing sw steering's QP doorbel bitmask, which had 20 bits. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5: DR, Rename an argument in dr_rdma_segmentsYevgeny Kliteynik
Rename the argument to better reflect that the meaning is not number of records, but wheather or not we should ring the dorbell. Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5e: RX, Add checks for calculated Striding RQ attributesTariq Toukan
Striding RQ attributes below are mutually dependent. An unaware change to one might take the others out of the valid range derived by the HW caps: - The MPWQE size in bytes - The number of strides in a MPWQE - The stride size Add checks to verify they are valid and comply to the HW spec and SW assumptions/requirements. This is not a fix, no particular issue exists today. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5e: Fix possible non-initialized struct usageVladyslav Tarasiuk
If mlx5e_devlink_port_register() fails, driver may try to register devlink health TX and RX reporters on non-registered devlink port. Instead, create health reporters only if mlx5e_devlink_port_register() does not fail. And destroy reporters only if devlink_port is registered. Also, change mlx5e_get_devlink_port() behavior and return NULL in case port is not registered to replicate devlink's wrapper when ndo is not implemented. Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19net/mlx5e: Fix lost changes during code movementsTariq Toukan
The changes done in commit [1] were missed by the code movements done in [2], as they were developed in ~parallel. Here we re-apply them. [1] commit e4484d9df500 ("net/mlx5e: Enable striding RQ for Connect-X IPsec capable devices") [2] commit b3a131c2a160 ("net/mlx5e: Move params logic into its dedicated file") Fixes: b3a131c2a160 ("net/mlx5e: Move params logic into its dedicated file") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-19ethtool: add missing EEPROM to list of messagesJakub Kicinski
ETHTOOL_MSG_MODULE_EEPROM_GET is missing from the list of messages. ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY is sadly a rather long name so we need to adjust column length. v2: use spaces (Andrew) Fixes: c781ff12a2f3 ("ethtool: Allow network drivers to dump arbitrary EEPROM data") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19ethtool: stats: clarify the initialization to ETHTOOL_STAT_NOT_SETJakub Kicinski
Ido suggests we add a comment about the init of stats to -1. This is unlikely to be clear to first time readers. Suggested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19bnxt: add more ethtool standard statsJakub Kicinski
Michael suggest a few more stats we can expose. $ ethtool -S eth0 --groups eth-mac Standard stats for eth0: eth-mac-FramesTransmittedOK: 902623288966 eth-mac-FramesReceivedOK: 28727667047 eth-mac-FrameCheckSequenceErrors: 1 eth-mac-AlignmentErrors: 0 eth-mac-OutOfRangeLengthField: 0 $ ethtool -S eth0 | grep '\(fcs\|align\|oor\)' rx_fcs_err_frames: 1 rx_align_err_frames: 0 tx_fcs_err_frames: 0 Suggested-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19Merge branch 'tja1103-driver'David S. Miller
Radu Pirea says: ==================== TJA1103 driver This small series adds the TJA1103 PHY driver. Changes in v3: - use phy_read_mmd_poll_timeout instead of spin_until_cond - changed the phy name from a generic one to something specific - minor indentation change Changes in v2: - implemented genphy_c45_pma_suspend/genphy_c45_pma_suspend - set default internal delays set to 2ns(90 degrees) - added "VEND1_" prefix to the register definitions - disable rxid in case of txid - disable txid in case of rxid - disable internal delays in rgmii mode - reduced max line length to 80 characters - rebased on top of net-next/master - use genphy_c45_loopback as .set_loopback callback - renamed the driver from nxp-c45 to nxp-c45-tja11xx - used phy phy_set_bits_mmd/phy_clear_bits_mmd instead on phy_write_mmd where I had to set/clear one bit. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19phy: nxp-c45: add driver for tja1103Radu Pirea (NXP OSS)
Add driver for tja1103 driver and for future NXP C45 PHYs. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: phy: add genphy_c45_pma_suspend/resumeRadu Pirea (NXP OSS)
Add generic PMA suspend and resume callback functions for C45 PHYs. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: marvell: prestera: add support for AC3X 98DX3265 deviceVadym Kochan
Add PCI match for AC3X 98DX3265 device which is supported by the current driver and firmware. Signed-off-by: Vadym Kochan <vkochan@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: stmmac: fix memory leak during driver probeWong Vee Khee
On driver probe, kmemleak reported the following memory leak which was due to allocated bitmap that was not being freed in stmmac_dvr_probe(). unreferenced object 0xffff9276014b13c0 (size 8): comm "systemd-udevd", pid 2143, jiffies 4294681112 (age 116.720s) hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace: [<00000000c51e34b2>] stmmac_dvr_probe+0x1c0/0x440 [stmmac] [<00000000b530eb41>] intel_eth_pci_probe.cold+0x2b/0x14e [dwmac_intel] [<00000000b10f8929>] pci_device_probe+0xd2/0x150 [<00000000fb254c74>] really_probe+0xf8/0x410 [<0000000034128a59>] driver_probe_device+0x5d/0x150 [<00000000016104d5>] device_driver_attach+0x53/0x60 [<00000000cb18cd07>] __driver_attach+0x96/0x140 [<00000000da9ffd5c>] bus_for_each_dev+0x7a/0xc0 [<00000000af061a88>] bus_add_driver+0x184/0x1f0 [<000000008be5c1c5>] driver_register+0x6c/0xc0 [<0000000052b18a9e>] do_one_initcall+0x4d/0x210 [<00000000154d4f07>] do_init_module+0x5c/0x230 [<000000009b648d09>] load_module+0x2a5a/0x2d40 [<000000000d86b76d>] __do_sys_finit_module+0xb5/0x120 [<000000002b0cef95>] do_syscall_64+0x33/0x40 [<0000000067b45bbb>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy") Cc: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19Merge branch 'korina-next'David S. Miller
Thomas Bogendoerfer says: ==================== net: Korina improvements While converting Mikrotik RB532 support to use device tree I stumbled over the korina ethernet driver, which used way too many MIPS specific hacks. This series cleans this all up and adds support for device tree. Changes in v6: - remove korina from resource names and adapt DT binding to it - removed superfluous braces around of_get_mac_address Changes in v5: - fixed email address in binding document, which prevented sending it Changes in v4: - improve error returns in mdio_read further - added clock name and improved clk handling - fixed binding errors Changes in v3: - use readl_poll_timeout_atomic in mdio_wait - return -ETIMEDOUT, if mdio_wait failed - added DT binding and changed name to idt,3243x-emac - fixed usage of of_get_mac_address for net-next Changes in v2: - added device tree support to get rid of idt_cpu_freq - fixed compile test on 64bit archs - fixed descriptor current address handling by storing/using mapped dma addresses (dma controller modifies current address) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19dt-bindings: net: korina: Add DT bindings for IDT 79RC3243x SoCsThomas Bogendoerfer
Add device tree bindings for ethernet controller integrated into IDT 79RC3243x SoCs. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: korina: Make driver COMPILE_TESTableThomas Bogendoerfer
Move structs/defines for ethernet/dma register into driver, since they are only used for this driver and remove any MIPS specific includes. This makes it possible to COMPILE_TEST the driver. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: korina: Get mdio input clock via common clock frameworkThomas Bogendoerfer
With device tree clock is provided via CCF. For non device tree use a maximum clock value to not overclock the PHY. The non device tree usage will go away after platform is converted to DT. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: korina: Add support for device treeThomas Bogendoerfer
If there is no mac address passed via platform data try to get it via device tree and fall back to a random mac address, if all fail. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: korina: Only pass mac address via platform dataThomas Bogendoerfer
Get rid of access to struct korina_device by just passing the mac address via platform data and use drvdata for passing netdev to remove function. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: korina: Use DMA APIThomas Bogendoerfer
Instead of messing with MIPS specific macros use DMA API for mapping descriptors and skbs. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: korina: Remove nested helpersThomas Bogendoerfer
Remove helpers, which are only used in one call site. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: korina: Remove not needed cache flushesThomas Bogendoerfer
Descriptors are mapped uncached so there is no need to do any cache handling for them. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: korina: Use devres functionsThomas Bogendoerfer
Simplify probe/remove code by using devm_ functions. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: korina: Fix MDIO functionsThomas Bogendoerfer
Fixed MDIO functions to work reliable and not just by accident. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19Merge branch 'mtk_ppe_offload-fixes'David S. Miller
Pablo Neira Ayuso says: ==================== mtk_ppe_offload fixes A few incremental fixes for the initial flowtable offload support and this driver: 1) Fix undefined reference to `dsa_port_from_netdev' due to missing dependencies in Kconfig, reported by Kbuild robot. 2) Missing mutex to serialize flow events via workqueue to the driver. 3) Handle FLOW_ACTION_VLAN_POP tag action. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: ethernet: mtk_eth_soc: handle VLAN pop actionPablo Neira Ayuso
Do not hit EOPNOTSUPP when flowtable offload provides a VLAN pop action. Fixes: efce49dfe6a8 ("netfilter: flowtable: add vlan pop action offload support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: ethernet: mtk_eth_soc: missing mutexPablo Neira Ayuso
Patch 2ed37183abb7 ("netfilter: flowtable: separate replace, destroy and stats to different workqueues") splits the workqueue per event type. Add a mutex to serialize updates. Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Reported-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: ethernet: mtk_eth_soc: fix undefined reference to `dsa_port_from_netdev'Pablo Neira Ayuso
Caused by: CONFIG_NET_DSA=m CONFIG_NET_MEDIATEK_SOC=y mtk_ppe_offload.c:undefined reference to `dsa_port_from_netdev' Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Add vlan match and pop actions to the flowtable offload, patches from wenxu. 2) Reduce size of the netns_ct structure, which itself is embedded in struct net Make netns_ct a read-mostly structure. Patches from Florian Westphal. 3) Add FLOW_OFFLOAD_XMIT_UNSPEC to skip dst check from garbage collector path, as required by the tc CT action. From Roi Dayan. 4) VLAN offload fixes for nftables: Allow for matching on both s-vlan and c-vlan selectors. Fix match of VLAN id due to incorrect byteorder. Add a new routine to properly populate flow dissector ethertypes. 5) Missing keys in ip{6}_route_me_harder() results in incorrect routes. This includes an update for selftest infra. Patches from Ido Schimmel. 6) Add counter hardware offload support through FLOW_CLS_STATS. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19netlink: simplify nl_set_extack_cookie_u64(), nl_set_extack_cookie_u32()Alexey Dobriyan
Taking address of a function argument directly works just fine. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: ethernet: mediatek: fix a typo bug in flow offloadingDENG Qingfang
Issue was traffic problems after a while with increased ping times if flow offload is active. It turns out that key_offset with cookie is needed in rhashtable_params but was re-assigned to head_offset. Fix the assignment. Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19Merge branch 'hns3-next'David S. Miller
Huazhong Tan says: ==================== net: hns3: misc updates for -next This series includes some misc updates for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: hns3: change the value of the SEPARATOR_VALUE macro in hclgevf_main.cHuazhong Tan
The SEPARATOR_VALUE macro is used as separator when getting the register value, but the value of this macro is different between pf and vf, it is a bit confusing for the user, so synchronize the value of vf with pf. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: hns3: cleanup inappropriate spaces in struct hlcgevf_tqp_statsHuazhong Tan
Modify some inappropriate spaces in comments of struct hlcgevf_tqp_stats. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: hns3: remove a duplicate pf reset countingHuazhong Tan
When enter suspend mode the counter of pf reset will be increased twice, since both hclge_prepare_general() and hclge_prepare_wait() increase this counter. So remove the duplicate counting in hclge_prepare_general(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: xilinx: drivers need/depend on HAS_IOMEMRandy Dunlap
kernel test robot reports build errors in 3 Xilinx ethernet drivers. They all use ioremap functions that are only available when HAS_IOMEM is set/enabled. If it is not enabled, they all have build errors, so make these 3 drivers depend on HAS_IOMEM. ld: drivers/net/ethernet/xilinx/xilinx_emaclite.o: in function `xemaclite_of_probe': xilinx_emaclite.c:(.text+0x9fc): undefined reference to `devm_ioremap_resource' ld: drivers/net/ethernet/xilinx/xilinx_axienet_main.o: in function `axienet_probe': xilinx_axienet_main.c:(.text+0x942): undefined reference to `devm_ioremap_resource' ld: drivers/net/ethernet/xilinx/ll_temac_main.o: in function `temac_probe': ll_temac_main.c:(.text+0x1283): undefined reference to `devm_platform_ioremap_resource_byname' ld: ll_temac_main.c:(.text+0x13ad): undefined reference to `devm_of_iomap' ld: ll_temac_main.c:(.text+0x162e): undefined reference to `devm_platform_ioremap_resource' Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Cc: Gary Guo <gary@garyguo.net> Cc: Zhang Changzhong <zhangchangzhong@huawei.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: stable@vger.kernel.org Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19Merge branch 'enetc-flow-control'David S. Miller
Vladimir Oltean says: ==================== Flow control for NXP ENETC This patch series contains logic for enabling the lossless mode on the RX rings of the ENETC, and the PAUSE thresholds on the internal FIFO memory. During testing it was found that, with the default FIFO configuration, a sender which isn't persuaded by our PAUSE frames and keeps sending will cause some MAC RX frame errors. To mitigate this, we need to ensure that the FIFO never runs completely full, so we need to fix up a setting that was supposed to be configured well out of reset. Unfortunately this requires the addition of a new mini-driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19net: enetc: add support for flow controlVladimir Oltean
In the ENETC receive path, a frame received by the MAC is first stored in a 256KB 'FIFO' memory, then transferred to DRAM when enqueuing it to the RX ring. The FIFO is a shared resource for all ENETC ports, but every port keeps track of its own memory utilization, on RX and on TX. There is a setting for RX rings through which they can either operate in 'lossy' mode (where the lack of a free buffer causes an immediate discard of the frame) or in 'lossless' mode (where the lack of a free buffer in the ring makes the frame stay longer in the FIFO). In turn, when the memory utilization of the FIFO exceeds a certain margin, the MAC can be configured to emit PAUSE frames. There is enough FIFO memory to buffer up to 3 MTU-sized frames per RX port while not jeopardizing the other use cases (jumbo frames), and also not consume bytes from the port TX allocations. Also, 3 MTU-sized frames worth of memory is enough to ensure zero loss for 64 byte packets at 1G line rate. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-19arm64: dts: ls1028a: declare the Integrated Endpoint Register Block nodeVladimir Oltean
Add a node describing the address in the SoC memory space for the IERB. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 22:54:01 +0000