| Age | Commit message (Collapse) | Author |
|---|
|
Allow users to disable kernel warnings for unaligned memory
accesses from kernel via the /proc/sys/kernel/ignore-unaligned-usertrap
procfs entry.
That way users can disable those warnings in case they happen too
often.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Although by default we negotiate CIFS Unix Extensions for SMB1 mounts to
Samba (and they work if the user does not specify "unix" or "posix" or
"linux" on mount), and we do properly handle when a user turns them off
with "nounix" mount parm. But with the changes to the mount API we
broke cases where the user explicitly specifies the "unix" option (or
equivalently "linux" or "posix") on mount with vers=1.0 to Samba or other
servers which support the CIFS Unix Extensions.
"mount error(95): Operation not supported"
and logged:
"CIFS: VFS: Check vers= mount option. SMB3.11 disabled but required for POSIX extensions"
even though CIFS Unix Extensions are supported for vers=1.0 This patch fixes
the case where the user specifies both "unix" (or equivalently "posix" or
"linux") and "vers=1.0" on mount to a server which supports the
CIFS Unix Extensions.
Cc: stable@vger.kernel.org
Reviewed-by: David Howells <dhowell@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When mounting with the SMB1 Unix Extensions (e.g. mounts
to Samba with vers=1.0), reconnects no longer reset the
Unix Extensions (SetFSInfo SET_FILE_UNIX_BASIC) after tcon so most
operations (e.g. stat, ls, open, statfs) will fail continuously
with:
"Operation not supported"
if the connection ever resets (e.g. due to brief network disconnect)
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When ice driver reads recipes from firmware information about
need_pass_l2 and allow_pass_l2 flags is not stored correctly.
Those flags are stored as one bit each in ice_sw_recipe structure.
Because of that, the result of checking a flag has to be casted to bool.
Note that the need_pass_l2 flag currently works correctly, because
it's stored in the first bit.
Fixes: bccd9bce29e0 ("ice: Add guard rule when creating FDB in switchdev")
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
While the iavf driver adds a s/w limit (128) on the number of FDIR
filters that the VF can request, a malicious VF driver can request more
than that and exhaust the resources for other VFs.
Add a similar limit in ice.
CC: stable@vger.kernel.org
Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Suggested-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"A pretty small update including mostly minor bug fixes in zoned
storage along with the large section support.
Enhancements:
- add support for FS_IOC_GETFSSYSFSPATH
- enable atgc dynamically if conditions are met
- use new ioprio Macro to get ckpt thread ioprio level
- remove unreachable lazytime mount option parsing
Bug fixes:
- fix null reference error when checking end of zone
- fix start segno of large section
- fix to cover read extent cache access with lock
- don't dirty inode for readonly filesystem
- allocate a new section if curseg is not the first seg in its zone
- only fragment segment in the same section
- truncate preallocated blocks in f2fs_file_open()
- fix to avoid use SSR allocate when do defragment
- fix to force buffered IO on inline_data inode
And some minor code clean-ups and sanity checks"
* tag 'f2fs-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (26 commits)
f2fs: clean up addrs_per_{inode,block}()
f2fs: clean up F2FS_I()
f2fs: use meta inode for GC of COW file
f2fs: use meta inode for GC of atomic file
f2fs: only fragment segment in the same section
f2fs: fix to update user block counts in block_operations()
f2fs: remove unreachable lazytime mount option parsing
f2fs: fix null reference error when checking end of zone
f2fs: fix start segno of large section
f2fs: remove redundant sanity check in sanity_check_inode()
f2fs: assign CURSEG_ALL_DATA_ATGC if blkaddr is valid
f2fs: fix to use mnt_{want,drop}_write_file replace file_{start,end}_wrtie
f2fs: clean up set REQ_RAHEAD given rac
f2fs: enable atgc dynamically if conditions are met
f2fs: fix to truncate preallocated blocks in f2fs_file_open()
f2fs: fix to cover read extent cache access with lock
f2fs: fix return value of f2fs_convert_inline_inode()
f2fs: use new ioprio Macro to get ckpt thread ioprio level
f2fs: fix to don't dirty inode for readonly filesystem
f2fs: fix to avoid use SSR allocate when do defragment
...
|
|
Pull jfs updates from David Kleikamp:
"Folio conversion from Matthew Wilcox and a few various fixes"
* tag 'jfs-6.11' of github.com:kleikamp/linux-shaggy:
jfs: don't walk off the end of ealist
jfs: Fix shift-out-of-bounds in dbDiscardAG
jfs: Fix array-index-out-of-bounds in diFree
jfs: fix null ptr deref in dtInsertEntry
jfs: Remove use of folio error flag
fs: Remove i_blocks_per_page
jfs: Change metapage->page to metapage->folio
jfs: Convert force_metapage to use a folio
jfs: Convert inc_io to take a folio
jfs: Convert page_to_mp to folio_to_mp
jfs; Convert __invalidate_metapages to use a folio
jfs: Convert dec_io to take a folio
jfs: Convert drop_metapage and remove_metapage to take a folio
jfs; Convert release_metapage to use a folio
jfs: Convert insert_metapage() to take a folio
jfs: Convert __get_metapage to use a folio
jfs: Convert metapage_writepage to metapage_write_folio
jfs: Convert metapage_read_folio to use folio APIs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- fix interrupt handling in the stm32 remoteproc driver when being
attached to an already running remote processor
- fix invalid kernel-doc and add missing MODULE_DESCRIPTION() in the
rpmsg char driver
* tag 'rpmsg-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: char: add missing MODULE_DESCRIPTION() macro
remoteproc: stm32_rproc: Fix mailbox interrupts queuing
rpmsg: char: Fix rpmsg_eptdev structure documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The maximum amount of DDR memory used by the Mediatek MT8188/MT8195
SCP is increased to handle new use cases. Handling of optional L1TCM
memory is made actually optional.
- An optimization is introduced to only clear the unused portion of IPI
shared buffers, rather than the entire buffer before writing the
message.
- Detection for IPC-only mode in the TI K3 DSP remoteproc driver is
corrected. The loglevel of a debug print in the same is lowered from
error.
- Support for attaching to an running remote processor is added to the
Xilinx R5F.
- An in-kernel implementation of the Qualcomm "protected domain mapper"
(aka service registry) service is introduced, to remove the
dependency on a userspace implementation to detect when the battery
monitor and USB Type-C port manager becomes available. This is then
integrated with the Qualcomm remoteproc driver.
- The Qualcomm PAS remoteproc driver gains support for attempting to
bust hwspinlocks held by the remote processor when it
crashed/stopped.
- The TI OMAP remoteproc driver is transitioned to use devres helpers
for various forms of allocations.
- Parsing of memory-regions in the i.MX remoteproc driver is improved
to avoid a NULL pointer dereference if the phandle reference is
empty. of_node reference counting is corrected in the same.
* tag 'rproc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: mediatek: Increase MT8188/MT8195 SCP core0 DRAM size
remoteproc: k3-dsp: Fix log levels where appropriate
remoteproc: xlnx: Add attach detach support
remoteproc: qcom: select AUXILIARY_BUS
remoteproc: k3-r5: Fix IPC-only mode detection
remoteproc: mediatek: Don't attempt to remap l1tcm memory if missing
remoteproc: qcom: enable in-kernel PD mapper
dt-bindings: remoteproc: imx_rproc: Add minItems for power-domain
remoteproc: imx_rproc: Fix refcount mistake in imx_rproc_addr_init
remoteproc: omap: Use devm_rproc_add() helper
remoteproc: omap: Use devm action to release reserved memory
remoteproc: omap: Use devm_rproc_alloc() helper
remoteproc: imx_rproc: Skip over memory region when node value is NULL
dt-bindings: remoteproc: k3-dsp: Correct optional sram properties for AM62A SoCs
remoteproc: qcom_q6v5_pas: Add hwspinlock bust on stop
soc: qcom: smem: Add qcom_smem_bust_hwspin_lock_by_host()
remoteproc: mediatek: Zero out only remaining bytes of IPI buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock updates from Bjorn Andersson:
"This introduces a mechanism in the hardware spinlock framework, and
the Qualcomm TCSR mutex driver, for allowing clients to bust locks
held by a remote processor in the event that this enters a faulty
state while holding the shared lock"
* tag 'hwlock-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock: qcom: implement bust operation
hwspinlock: Introduce hwspin_lock_bust()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"This is rather small this time and contains just three changes.
The first change by Oscar Salvador drops support for memory hotplug
and hotremove for sh as the kernel stopped supporting it on 32-bit
platforms since 7ec58a2b941e ("mm/memory_hotplug: restrict
CONFIG_MEMORY_HOTPLUG to 64 bit").
That then results in a follow-up change to update all affected board
config files.
The third change comes from Jeff Johnson which adds the missing
MODULE_DESCRIPTION() macro to the push-switch driver"
* tag 'sh-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: push-switch: Add missing MODULE_DESCRIPTION() macro
sh: config: Drop CONFIG_MEMORY_{HOTPLUG,HOTREMOVE}
sh: Drop support for memory hotplug and memory hotremove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module update from Luis Chamberlain:
"This is a super boring development cycle this time around for modules,
there is only one patch in this pull request.
The patch deals with a corner case set of dependencies which is not
resolved today to ensure users get the module they need on initramfs.
Currently only one module is known to exist which needs this, however
this can grow to capture other corner cases likely escaped and not
reported before. The kernel change is just a section update, the real
work is done and merged already on upstream kmod.
This has been on linux-next for 3 weeks now"
* tag 'modules-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: create weak dependecies
|
|
Commit 0dc83ad8bfc9 ("clk: samsung: Don't register clkdev lookup for the
fixed rate clocks") claimed registering clkdev lookup is not necessary
anymore, but that was not entirely true: Exynos4210/4212/4412 clock code
still relied on it to get the clock rate of xxti or xusbxti external
clocks.
Drop that requirement by accessing already registered clk_hw when
looking up the xxti/xusbxti rate.
Reported-by: Artur Weber <aweber.kernel@gmail.com>
Closes: https://lore.kernel.org/all/6227c1fb-d769-462a-b79b-abcc15d3db8e@gmail.com/
Fixes: 0dc83ad8bfc9 ("clk: samsung: Don't register clkdev lookup for the fixed rate clocks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240722063309.60054-1-krzysztof.kozlowski@linaro.org
Tested-by: Artur Weber <aweber.kernel@gmail.com> # Exynos4212
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek:
- show patch->replace flag in sysfs
- add or improve few selftests
* tag 'livepatching-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Replace snprintf() with sysfs_emit()
selftests/livepatch: Add selftests for "replace" sysfs attribute
livepatch: Add "replace" sysfs attribute
selftests: livepatch: Test atomic replace against multiple modules
selftests/livepatch: define max test-syscall processes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"The I2C core has two header documentation updates as the dependecies
are in now.
The I2C host drivers add some patches which nearly fell through the
cracks:
- Added descriptions in the DTS for the Qualcomm SM8650 and SM8550
Camera Control Interface (CCI).
- Added support for the "settle-time-us" property, which allows the
gpio-mux device to switch from one bus to another with a
configurable delay. The time can be set in the DTS. The latest
change also includes file sorting.
- Fixed slot numbering in the SMBus framework to prevent failures
when more than 8 slots are occupied. It now enforces a a maximum of
8 slots to be used. This ensures that the Intel PIIX4 device can
register the SPDs correctly without failure, even if other slots
are populated but not used"
* tag 'i2c-for-6.11-rc1-second-batch' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: header: improve kdoc for i2c_algorithm
i2c: header: remove unneeded stuff regarding i2c_algorithm
i2c: piix4: Register SPDs
i2c: smbus: remove i801 assumptions from SPD probing
i2c: mux: gpio: Add support for the 'settle-time-us' property
i2c: mux: gpio: Re-order #include to match alphabetic order
dt-bindings: i2c: mux-gpio: Add 'settle-time-us' property
dt-bindings: i2c: qcom-cci: Document sm8650 compatible
dt-bindings: i2c: qcom-cci: Document sm8550 compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"broadcom:
- remove unused pdc_dma_map
imx:
- fix TXDB_V2 channel race condition
mediatek:
- cleanup and refactor driver
- add bindings for gce-props
omap:
- fix mailbox interrupt sharing
qcom:
- add bindings for SA8775p
- add CPUCP driver
zynqmp:
- make polling period configurable"
* tag 'mailbox-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: mtk-cmdq: Move devm_mbox_controller_register() after devm_pm_runtime_enable()
mailbox: zynqmp-ipi: Make polling period configurable
mailbox: qcom-cpucp: fix 64BIT dependency
mailbox: Add support for QTI CPUCP mailbox controller
dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings
dt-bindings: remoteproc: qcom,sa8775p-pas: Document the SA8775p ADSP, CDSP and GPDSP
mailbox: mtk-cmdq: add missing MODULE_DESCRIPTION() macro
mailbox: bcm-pdc: remove unused struct 'pdc_dma_map'
mailbox: imx: fix TXDB_V2 channel race condition
mailbox: omap: Fix mailbox interrupt sharing
mailbox: mtk-cmdq: Dynamically allocate clk_bulk_data structure
mailbox: mtk-cmdq: Move and partially refactor clocks probe
mailbox: mtk-cmdq: Stop requiring name for GCE clock
dt-bindings: mailbox: Add mediatek,gce-props.yaml
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull PCMCIA updates from Dominik Brodowski:
"A number of tiny cleanups of the PCMCIA subsystem by Jeff Johnson,
Jules Irenge, and Krzysztof Kozlowski"
* tag 'pcmcia-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: add missing MODULE_DESCRIPTION() macros
pcmcia: Use resource_size function on resource object
pcmcia: bcm63xx: drop driver owner assignment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- new charging_orange_full_green RGB LED trigger
- simplify and cleanup power-supply LED trigger code
- expose power information via hwmon compatibility layer
New hardware support:
- enable battery support for Qualcomm Snapdragon X Elite
- new battery driver for Maxim MAX17201/MAX17205
- new battery driver for Lenovo Yoga C630 laptop (custom EC)
Cleanups:
- cleanup 'struct i2c_device_id' initializations
- misc small battery driver cleanups and fixes"
* tag 'for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: sysfs: use power_supply_property_is_writeable()
power: supply: qcom_battmgr: Enable battery support on x1e80100
power: supply: add support for MAX1720x standalone fuel gauge
dt-bindings: power: supply: add support for MAX17201/MAX17205 fuel gauge
power: reset: piix4: add missing MODULE_DESCRIPTION() macro
power: supply: samsung-sdi-battery: Constify struct power_supply_maintenance_charge_table
power: supply: samsung-sdi-battery: Constify struct power_supply_vbat_ri_table
power: supply: lenovo_yoga_c630_battery: add Lenovo C630 driver
power: supply: ingenic: Fix some error handling paths in ingenic_battery_get_property()
power: supply: ab8500: Clean some error messages
power: supply: ab8500: Use iio_read_channel_processed_scale()
power: supply: ab8500: Fix error handling when calling iio_read_channel_processed()
power: supply: hwmon: Add support for power sensors
power: supply: ab8500: remove unused struct 'inst_curr_result_list'
power: supply: bd99954: remove unused struct 'battery_data'
power: supply: leds: Add activate() callback to triggers
power: supply: leds: Share trig pointer for online and charging_full
power: supply: leds: Add power_supply_[un]register_led_trigger()
power: supply: Drop explicit initialization of struct i2c_device_id::driver_data to 0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI update from Sebastian Reichel:
- drop unused gpio.h header from SSI McSAAB protocol driver
* tag 'hsi-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: ssi_protocol: Remove unused linux/gpio.h
|
|
In this part of the documentation, $(CC) is meant, but gcc is written.
Signed-off-by: Ivan Davydov <davydoff33@yandex.ru>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Replace a comma between expression statements by a semicolon.
Fixes: c9b258c6be09 ("iommu/amd: Prepare for generic IO page table framework")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240716072545.968690-1-nichen@iscas.ac.cn
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In sprd_iommu_cleanup() before calling function sprd_iommu_hw_en()
dom->sdev is equal to NULL, which leads to null dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9afea57384d4 ("iommu/sprd: Release dma buffer to avoid memory leak")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lore.kernel.org/r/20240716125522.3690358-1-artem.chernyshev@red-soft.ru
Signed-off-by: Will Deacon <will@kernel.org>
|
|
path
Dan Carpenter reported a Smack static checker warning:
fs/smb/client/cifsfs.c:1981 init_cifs()
error: we previously assumed 'serverclose_wq' could be null (see line 1895)
The patch which introduced the serverclose workqueue used the wrong
oredering in error paths in init_cifs() for freeing it on errors.
Fixes: 173217bd7336 ("smb3: retrying on failed server close")
Cc: stable@vger.kernel.org
Cc: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Howells <dhowell@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
|
|
Currently, sysreg has value as 0b0010 for the presence of GICv4.1 in
ID_PFR1_EL1 and ID_AA64PFR0_EL1, instead of 0b0011 as per ARM ARM.
Hence, correct them to reflect ARM ARM.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240718215532.616447-1-rananta@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
glibc added support for .gnu.hash in 2006 and .hash has been obsoleted
for more than one decade in many Linux distributions. Using
--hash-style=sysv might imply unaddressed issues and confuse readers.
Just drop the option and rely on the linker default, which is likely
"both", or "gnu" when the distribution really wants to eliminate sysv
hash overhead.
Similar to commit 6b7e26547fad ("x86/vdso: Emit a GNU hash").
Signed-off-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20240718173423.1574395-1-maskray@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The string passed to ksft_test_result_skip is missing the `type_name`
Signed-off-by: Remington Brasga <rbrasga@uci.edu>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240712231730.2794-1-rbrasga@uci.edu
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since the commit 819e50e25d0c ("arm64: Add ftrace support"),
HAVE_FUNCTION_GRAPH_TRACER has always been enabled. Although a subsequent
commit 364697032246 ("arm64: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL")
redundantly added check on HAVE_FUNCTION_GRAPH_TRACER, while enabling the
config HAVE_FUNCTION_GRAPH_RETVAL. Let's just drop this redundant check.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240716050915.2657694-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since commit 0383808e4d99 ("arm64: kasan: Reduce minimum shadow
alignment and enable 5 level paging"), HAVE_ARCH_KASAN is always 'y'.
The condition 'if HAVE_ARCH_KASAN' is always met.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240715192843.2201439-1-masahiroy@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Removing the CONFIG_PROTECTED_VIRTUALIZATION_GUEST ifdefs and config
option as well as CONFIG_KVM ifdefs in uv files.
Having this configurable has been more of a pain than a help.
It's time to remove the ifdefs and the config option.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Now that everything has been converted, add the option
'relocate_lowcore' to enable relocating the lowcore.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in store_status()
and __do_machine_kdump().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in system_call().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in ret_from_fork().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in __switch_to().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in restart_int_handler().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in mcck_int_handler().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in the ext/io interrupt
handlers.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in pgm_check_handler().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to CHECK_VMAP_STACK and CHECK_STACK. No
functional change, because %r0 is passed to the macro.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to SIEEXIT. No functional change, because
%r0 is passed to the macro.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to MBEAR. No functional change, because
%r0 is passed to the macro.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in __sie64a().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In preparation of having lowcore at different address than zero,
add the base register to all lowcore accesses in startup_continue().
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The s390 architecture defines two special per-CPU data pages
called the "prefix area". In s390-linux terminology this is usually
called "lowcore". This memory area contains system configuration
data like old/new PSW's for system call/interrupt/machine check
handlers and lots of other data. It is normally mapped to logical
address 0. This area can only be accessed when in supervisor mode.
This means that kernel code can dereference NULL pointers, because
accesses to address 0 are allowed. Parts of lowcore can be write
protected, but read accesses and write accesses outside of the write
protected areas are not caught.
To remove this limitation for debugging and testing, remap lowcore to
another address and define a function get_lowcore() which simply
returns the address where lowcore is mapped at. This would normally
introduce a pointer dereference (=memory read). As lowcore is used
for several very often used variables, add code to patch this function
during runtime, so we avoid the memory reads.
For C code get_lowcore() has to be used, for assembly code it is
the GET_LC macro. When using this macro/function a reference is added
to alternative patching. All these locations will be patched to the
actual lowcore location when the kernel is booted or a module is loaded.
To make debugging/bisecting problems easier, this patch adds all the
infrastructure but the lowcore address is still hardwired to 0. This
way the code can be converted on a per function basis, and the
functionality is enabled in a patch after all the functions have
been converted.
Note that this requires at least z16 because the old lpsw instruction
only allowed a 12 bit displacement. z16 introduced lpswey which allows
20 bits (signed), so the lowcore can effectively be mapped from
address 0 - 0x7e000. To use 0x7e000 as address, a 6 byte lgfi
instruction would have to be used in the alternative. To save two
bytes, llilh can be used, but this only allows to set bits 16-31 of
the address. In order to use the llilh instruction, use 0x70000 as
alternative lowcore address. This is still large enough to catch
NULL pointer dereferences into large arrays.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
GCC may die with an ICE if the flag outputs constraint is used in
combination with other inline assemblies. This will be fixed with
GCC 14.2.0.
Therefore disable the use of the constraint for now.
Link: https://gcc.gnu.org/git?p=gcc.git;a=commit;h=cd11413ff7c4353a3e336db415304f788d23a393
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
CIF_SIE indicates if a thread is running in SIE context. This is the
state of a thread and not the CPU. Therefore move this indicator to
thread info.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The low level machine check handler code fills the ptregs structure
partially with the register contents present at machine check handler
entry and partially with contents from the machine check save area.
In case of a machine check the contents of all general purpose
registers are saved by the CPU to the machine check save area.
Therefore simplify the code and fill the ptregs structure by only
using the machine check save area as source.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The alternative and the normal facility list are always identical. Remove
the alternative facility list, which allows to simplify the alternatives
code.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
