| Age | Commit message (Collapse) | Author |
|---|
|
When call function devm_platform_ioremap_resource(), we should use IS_ERR()
to check the return value and return PTR_ERR() if failed.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ever since its first commit 0ca7111a38f05 ("phy: add AT803x driver") the
PHY ID mask was set to 0xffffffef. It is unclear to me why this mask was
chosen in the first place. Both the AR8031/AR8033 and the AR8035
datasheets mention it is always the given value:
- for AR8031/AR8033 its 0x004d/0xd074
- for AR8035 its 0x004d/0xd072
Unfortunately, I don't have a datasheet for the AR8030. Therefore, we
leave its PHY ID mask untouched. For the PHYs mentioned before use the
handy PHY_ID_MATCH_EXACT() macro.
I've tried to contact the author of the initial commit, but received no
answer so far.
Cc: Matus Ujhelyi <ujhelyi.m@gmail.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The srmmu_nocache_init() uses __nocache_fix() macro to add an offset to
page table entry to access srmmu_nocache_pool.
But since sparc32 has only three actual page table levels, pgd, p4d and
pud are essentially the same thing and pgd_offset() and p4d_offset() are
no-ops, the __nocache_fix() should be done only at PUD level.
Remove __nocache_fix() for p4d_offset() and pud_offset() and keep it
only for PUD and lower levels.
Fixes: c2bc26f7ca1f ("sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init()")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc fixes from Andrew Morton:
"11 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add files related to kdump
z3fold: fix use-after-free when freeing handles
sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init()
MAINTAINERS: update email address for Naoya Horiguchi
sh: include linux/time_types.h for sockios
kasan: disable branch tracing for core runtime
selftests/vm/write_to_hugetlbfs.c: fix unused variable warning
selftests/vm/.gitignore: add mremap_dontunmap
rapidio: fix an error in get_user_pages_fast() error handling
x86: bitops: fix build regression
device-dax: don't leak kernel memory to user space after unloading kmem
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"So, turns out the kobject fix didn't quite work, so here are four
patches that in the end, result in just two driver core fixes for
reported issues that no one has had problems with.
The kobject patch that was originally in here has now been reverted,
as Guenter reported boot problems with it on some of his systems"
* tag 'driver-core-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "kobject: Make sure the parent does not get released before its children"
kobject: Make sure the parent does not get released before its children
driver core: Fix handling of SYNC_STATE_ONLY + STATELESS device links
driver core: Fix SYNC_STATE_ONLY device link implementation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.7-rc7 that resolve
some reported issues. Included in here are tiny fixes for the mei,
coresight, rtsx, ipack, and mhi drivers.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: Add short delay after exit from ASPM
bus: mhi: core: Fix some error return code
ipack: tpci200: fix error return code in tpci200_register()
coresight: cti: remove incorrect NULL return check
mei: release me_cl object reference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/iio fixes from Greg KH:
"Here are some small staging and IIO driver fixes for 5.7-rc7
Nothing major, just a collection of IIO driver fixes for reported
issues, and a few small staging driver fixes that people have found.
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wfx: unlock on error path
staging: greybus: Fix uninitialized scalar variable
staging: kpc2000: fix error return code in kp2000_pcie_probe()
iio: sca3000: Remove an erroneous 'get_device()'
iio: adc: stm32-dfsdm: fix device used to request dma
iio: adc: stm32-adc: fix device used to request dma
iio: adc: ti-ads8344: Fix channel selection
staging: iio: ad2s1210: Fix SPI reading
iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()'
iio: imu: st_lsm6dsx: unlock on error in st_lsm6dsx_shub_write_raw()
iio: chemical: atlas-sensor: correct DO-SM channels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fix from Greg KH:
"Here is a single serial driver fix for 5.7-rc7. It resolves an issue
with the SiFive serial console init sequence that was reported a
number of times.
It has been in linux-next for a while now with no reported issues"
* tag 'tty-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: add missing spin_lock_init for SiFive serial console
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Add missing R_390_JMP_SLOT relocation type in KASLR code.
- Fix set_huge_pte_at for empty ptes issue which has been uncovered
with arch page table helper tests.
- Correct initrd location for kdump kernel.
- Fix s390_mmio_read/write with MIO in PCI code.
* tag 's390-5.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/kaslr: add support for R_390_JMP_SLOT relocation type
s390/mm: fix set_huge_pte_at() for empty ptes
s390/kexec_file: fix initrd location for kdump kernel
s390/pci: Fix s390_mmio_read/write with MIO
|
|
Kdump is implemented based on kexec, however some files are only related
to crash dumping and missing, add them to KDUMP entry.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Dave Young <dyoung@redhat.com>
Link: http://lkml.kernel.org/r/20200520103633.GW5029@MiWiFi-R3L-srv
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
free_handle() for a foreign handle may race with inter-page compaction,
what can lead to memory corruption.
To avoid that, take write lock not read lock in free_handle to be
synchronized with __release_z3fold_page().
For example KASAN can detect it:
==================================================================
BUG: KASAN: use-after-free in LZ4_decompress_safe+0x2c4/0x3b8
Read of size 1 at addr ffffffc976695ca3 by task GoogleApiHandle/4121
CPU: 0 PID: 4121 Comm: GoogleApiHandle Tainted: P S OE 4.19.81-perf+ #162
Hardware name: Sony Mobile Communications. PDX-203(KONA) (DT)
Call trace:
LZ4_decompress_safe+0x2c4/0x3b8
lz4_decompress_crypto+0x3c/0x70
crypto_decompress+0x58/0x70
zcomp_decompress+0xd4/0x120
...
Apart from that, initialize zhdr->mapped_count in init_z3fold_page() and
remove "newpage" variable because it is not used anywhere.
Signed-off-by: Uladzislau Rezki <uladzislau.rezki@sony.com>
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Raymond Jennings <shentino@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200520082100.28876-1-vitaly.wool@konsulko.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kbuild test robot reported the following warning:
arch/sparc/mm/srmmu.c: In function 'srmmu_nocache_init': arch/sparc/mm/srmmu.c:300:9: error: variable 'pud' set but not used [-Werror=unused-but-set-variable]
300 | pud_t *pud;
This warning is caused by misprint in the page table traversal in
srmmu_nocache_init() function which accessed a PMD entry using PGD
rather than PUD.
Since sparc32 has only 3 page table levels, the PGD and PUD are
essentially the same and usage of __nocache_fix() removed the type
checking.
Use PUD for the consistency and to silence the compiler warning.
Fixes: 7235db268a2777bc38 ("sparc32: use pgtable-nopud instead of 4level-fixup")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200520132005.GM1059226@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
My email address has changed due to system upgrade, so please update it
in MAINTAINERS list. My old address (n-horiguchi@ah.jp.nec.com) will be
still active for a few months.
Note that my email system has some encoding issue and can't send patches
in raw format via git-send-email. So patches from me will be delivered
via my free address (nao.horiguchi@gmail.com) or GitHub.
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1589874488-9247-1-git-send-email-naoya.horiguchi@nec.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Using the socket ioctls on arch/sh (and only there) causes build time
problems when __kernel_old_timeval/__kernel_old_timespec are not already
visible to the compiler.
Add an explict include line for the header that defines these
structures.
Fixes: 8c709f9a0693 ("y2038: sh: remove timeval/timespec usage from headers")
Fixes: 0768e17073dc ("net: socket: implement 64-bit timestamps")
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200519131327.1836482-1-arnd@arndb.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
During early boot, while KASAN is not yet initialized, it is possible to
enter reporting code-path and end up in kasan_report().
While uninitialized, the branch there prevents generating any reports,
however, under certain circumstances when branches are being traced
(TRACE_BRANCH_PROFILING), we may recurse deep enough to cause kernel
reboots without warning.
To prevent similar issues in future, we should disable branch tracing
for the core runtime.
[elver@google.com: remove duplicate DISABLE_BRANCH_PROFILING, per Qian Cai]
Link: https://lore.kernel.org/lkml/20200517011732.GE24705@shao2-debian/
Link: http://lkml.kernel.org/r/20200522075207.157349-1-elver@google.com
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r//20200517011732.GE24705@shao2-debian/
Link: http://lkml.kernel.org/r/20200519182459.87166-1-elver@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove unused variable "i", which was triggering a compiler warning.
Fixes: 29750f71a9b4 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-By: Mina Almasry <almasrymina@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Link: http://lkml.kernel.org/r/20200517001245.361762-2-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add mremap_dontunmap to .gitignore.
Fixes: 0c28759ee3c9 ("selftests: add MREMAP_DONTUNMAP selftest")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Brian Geffon <bgeffon@google.com>
Link: http://lkml.kernel.org/r/20200517002509.362401-2-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the case of get_user_pages_fast() returning fewer pages than
requested, rio_dma_transfer() does not quite do the right thing. It
attempts to release all the pages that were requested, rather than just
the pages that were pinned.
Fix the error handling so that only the pages that were successfully
pinned are released.
Fixes: e8de370188d0 ("rapidio: add mport char device driver")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200517235620.205225-2-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is easily reproducible via CC=clang + CONFIG_STAGING=y +
CONFIG_VT6656=m.
It turns out that if your config tickles __builtin_constant_p via
differences in choices to inline or not, these statements produce
invalid assembly:
$ cat foo.c
long a(long b, long c) {
asm("orb %1, %0" : "+q"(c): "r"(b));
return c;
}
$ gcc foo.c
foo.c: Assembler messages:
foo.c:2: Error: `%rax' not allowed with `orb'
Use the `%b` "x86 Operand Modifier" to instead force register allocation
to select a lower-8-bit GPR operand.
The "q" constraint only has meaning on -m32 otherwise is treated as
"r". Not all GPRs have low-8-bit aliases for -m32.
Fixes: 1651e700664b4 ("x86: Fix bitops.h warning with a moved cast")
Reported-by: kernelci.org bot <bot@kernelci.org>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Suggested-by: Brian Gerst <brgerst@gmail.com>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Suggested-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> [build, clang-11]
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-By: Brian Gerst <brgerst@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Marco Elver <elver@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20200508183230.229464-1-ndesaulniers@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/961
Link: https://lore.kernel.org/lkml/20200504193524.GA221287@google.com/
Link: https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#x86Operandmodifiers
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Assume we have kmem configured and loaded:
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory$
140000000-1481fffff : namespace0.0
150000000-33fffffff : dax0.0
150000000-33fffffff : System RAM
Assume we try to unload kmem. This force-unloading will work, even if
memory cannot get removed from the system.
[root@localhost ~]# rmmod kmem
[ 86.380228] removing memory fails, because memory [0x0000000150000000-0x0000000157ffffff] is onlined
...
[ 86.431225] kmem dax0.0: DAX region [mem 0x150000000-0x33fffffff] cannot be hotremoved until the next reboot
Now, we can reconfigure the namespace:
[root@localhost ~]# ndctl create-namespace --force --reconfig=namespace0.0 --mode=devdax
[ 131.409351] nd_pmem namespace0.0: could not reserve region [mem 0x140000000-0x33fffffff]dax
[ 131.410147] nd_pmem: probe of namespace0.0 failed with error -16namespace0.0 --mode=devdax
...
This fails as expected due to the busy memory resource, and the memory
cannot be used. However, the dax0.0 device is removed, and along its
name.
The name of the memory resource now points at freed memory (name of the
device):
[root@localhost ~]# cat /proc/iomem
...
140000000-33fffffff : Persistent Memory
140000000-1481fffff : namespace0.0
150000000-33fffffff : �_�^7_��/_��wR��WQ���^��� ...
150000000-33fffffff : System RAM
We have to make sure to duplicate the string. While at it, remove the
superfluous setting of the name and fixup a stale comment.
Fixes: 9f960da72b25 ("device-dax: "Hotremove" persistent memory that is used like normal RAM")
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org> [5.3]
Link: http://lkml.kernel.org/r/20200508084217.9160-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 4ef12f7198023c09ad6d25b652bd8748c965c7fa.
Guenter reports:
All my arm64be (arm64 big endian) boot tests crash with this
patch applied. Reverting it fixes the problem. Crash log and
bisect results (from pending-fixes branch) below.
And also:
arm64 images don't crash but report lots of "poison overwritten"
backtraces like the one below. On arm, I see "refcount_t:
underflow", also attached. I didn't bisect those, but given the
context I would suspect the same culprit.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200513151840.36400-1-heikki.krogerus@linux.intel.com
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: kernel test robot <rong.a.chen@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix loop variables that are comparing or assigning signed against
unsigned values, mostly by declaring loop counters as unsigned.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The driver was using rq_last_status where it should have been
using sq_last_status. Fix the string to be using the correct
error reporting variable.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The "ethtool -d" handler reads registers in the ice_regs_dump_list array
and returns read values back to the userspace.
The register offsets PFINT0_ITR* are not valid as per the specification
and reading these causes a "unable to handle kernel paging request" bug
in the driver. Remove these registers from ice_regs_dump_list.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Require the Dynamic Device Personalization (DDP) file to have the same
major version number and the same or older minor number than the firmware
version major and minor, respectively.
Check the OS and NVM package versions before downloading the package.
If the OS package version is not compatible with NVM then return an
appropriate error.
Split the 32-byte segment name into a 28-byte segment name and
a 4-byte Track-ID. Older packages will still work with this change
because no package has a name that will take up more than 28 bytes;
in this case the Track-ID will be 0.
Note that the driver will store the segment name as 32-bytes in the
ice_hw structure, in order to normalize the length of the various
package name strings that it uses.
Also add section ID and structure for the segment metadata section.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently if a unicast MAC is set via ndo_set_vf_mac, the PF driver will
set the VF's dflt_lan_addr.addr once some basic checks have passed. The
VF is then reset. During reset the PF driver will attempt to program the
VF's MAC from the dflt_lan_addr.addr field. This fails when the MAC
already exists on the PF's switch.
This is causing the VF to be completely disabled until removing/enabling
any VFs via sysfs.
Fix this by checking if the unicast MAC exists before triggering a VF
reset directly in ndo_set_vf_mac. Also, add a check if the unicast MAC
is set to the same value as before and return 0 if that is the case.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Currently if the iavf is loaded and a VF link transitions from up to
down to up again a Tx timeout will be triggered. This happens because
Tx/Rx queue interrupts are only enabled when receiving the
VIRTCHNL_OP_CONFIG_MAP_IRQ message, which happens on reset or initial
iavf driver load, but not when bringing link up. This is problematic
because they are disabled on the VIRTCHNL_OP_DISABLE_QUEUES message,
which is part of bringing a VF's link down. However, they are not
enabled on the VIRTCHNL_OP_ENABLE_QUEUES message, which is part of
bringing a VF's link up.
Fix this by re-enabling the VF's Rx and Tx queue interrupts when they
were previously configured. This is done by first checking to make
sure the previous value in QINT_[R|T]QCTL.MSIX_INDX is not 0, which
is used to represent the OICR in the VF's interrupt space. If the
MSIX_INDX is non-zero then enable the interrupt by setting the
QINT_[R|T]CTL.CAUSE_ENA bit to 1.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Rx MDD auto reset message was not being logged because logging occurred
after the VF reset and the VF MDD data was reinitialized.
Log the Rx MDD auto reset message before triggering the VF reset.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
As per the specification, the driver needs to call set_mac_cfg
(opcode 0x0603) to be able to exercise jumbo frames. Call the
function during initialization and the post reset rebuild flow.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Enable accelerated Receive Flow Steering (aRFS). It is used to steer Rx
flows to a specific queue. This functionality is triggered by the network
stack through ndo_rx_flow_steer and requires Flow Director (ntuple on) to
function.
The fltr_info is used to add/remove/update flow rules in the HW, the
fltr_state is used to determine what to do with the filter with respect
to HW and/or SW, and the flow_id is used in co-ordination with the
network stack.
The work for aRFS is split into two paths: the ndo_rx_flow_steer
operation and the ice_service_task. The former is where the kernel hands
us an Rx SKB among other items to setup aRFS and the latter is where
the driver adds/updates/removes filter rules from HW and updates filter
state.
In the Rx path the following things can happen:
1. New aRFS entries are added to the hash table and the state is
set to ICE_ARFS_INACTIVE so the filter can be updated in HW
by the ice_service_task path.
2. aRFS entries have their Rx Queue updated if we receive a
pre-existing flow_id and the filter state is ICE_ARFS_ACTIVE.
The state is set to ICE_ARFS_INACTIVE so the filter can be
updated in HW by the ice_service_task path.
3. aRFS entries marked as ICE_ARFS_TODEL are deleted
In the ice_service_task path the following things can happen:
1. New aRFS entries marked as ICE_ARFS_INACTIVE are added or
updated in HW.
and their state is updated to ICE_ARFS_ACTIVE.
2. aRFS entries are deleted from HW and their state is updated
to ICE_ARFS_TODEL.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Following a reset, Flow Director filters are cleared from the hardware.
Rebuild the filters using the software structures containing the filter
rules.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Flex-bytes allows for packet matching based on an offset and value. This
is supported via the ethtool user-def option. It is specified by providing
an offset followed by a 2 byte match value. Offset is measured from the
start of the MAC address.
The following restrictions apply to flex-bytes. The specified offset must
be an even number and be smaller than 0x1fe.
Example usage:
ethtool -N eth0 flow-type tcp4 src-ip 192.168.0.55 dst-ip 172.16.0.55 \
src-port 12 dst-port 13 user-def 0x10ffff action 32
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes, two in drivers, one to fix a hang after reset with
iSCSI, and one to avoid a spurious log message; and the final core one
to correct a suspend/resume miscount with quiesced devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Put lun_ref at end of tmr processing
scsi: pm: Balance pm_only counter of request queue during system resume
scsi: qla2xxx: Do not log message when reading port speed via sysfs
|
|
Extend supported filters to allow for IPv6 filters.
Supported fields are: src-ip, dst-ip, src-port, and dst-port
Supported flow-types are: tcp6, udp6, sctp6, ip6
Example usage:
ethtool -N eth0 flow-type tcp6 src-port 12 dst-port 13 \
src-ip fce0::1:34 dst-ip fce0::1:35 action 32
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Pull drm fixes from Dave Airlie:
"Things seemed to have quieten down, though no i915 pull (I even gave
them an extra 12 hours in case they were late).
The amdgpu floating point fix is probably the largest, but it just
moves some code around to it doesn't do fpu stuff outside the fpu
boundaries. Otherwise it's just a couple of vmwgfx fixes (maintainer
change) and two etnaviv fixes.
vmwgfx:
- change maintainers
- fix redundant assignment
- fix parameter name
- fix return value
etnaviv:
- memory leak fix when userspace passes a invalid softpin address
- off-by-one crashing the kernel in the perfmon domain iteration when
the GPU core has both 2D and 3D capabilities
amdgpu:
- DP fix
- Floating point fix
- Fix cursor stutter issue"
* tag 'drm-fixes-2020-05-23' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Defer cursor lock until after VUPDATE
drm/amd/display: Remove dml_common_def file
drm/amd/display: DP training to set properly SCRAMBLING_DISABLE
drm/edid: Add Oculus Rift S to non-desktop list
drm/etnaviv: Fix a leak in submit_pin_objects()
drm/etnaviv: fix perfmon domain interation
drm/vmwgfx: Return true in function vmw_fence_obj_signaled()
drm/vmwgfx: remove redundant assignment to variable ret
drm/vmwgfx: Fix parameter name in vmw_bo_init
drm/vmwgfx: update MAINTAINERS entry
|
|
Support the addition and deletion of IPv4 filters.
Supported fields are: src-ip, dst-ip, src-port, and dst-port
Supported flow-types are: tcp4, udp4, sctp4, ip4
Example usage:
ethtool -N eth0 flow-type tcp4 src-ip 192.168.0.55 dst-ip 172.16.0.55 \
src-port 16 dst-port 12 action 32
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Add functionality for ethtool --show-ntuple, allowing for filters to be
displayed when set functionality is added. Add statistics related to
Flow Director matches and status.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Flow Director allows for redirection based on ntuple rules. Rules are
programmed using the ethtool set-ntuple interface. Supported actions are
redirect to queue and drop.
Setup the initial framework to process Flow Director filters. Create and
allocate resources to manage and program filters to the hardware. Filters
are processed via a sideband interface; a control VSI is created to manage
communication and process requests through the sideband. Upon allocation of
resources, update the hardware tables to accept perfect filters.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
On e.g. m68k, the alignment of 32-bit values is only 2 bytes, leading
to the following:
./include/linux/avf/virtchnl.h:147:36: warning: division by zero [-Wdiv-by-zero]
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:577:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
VIRTCHNL_CHECK_STRUCT_LEN(272, virtchnl_filter);
^~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:577:32: error: enumerator value for ‘virtchnl_static_assert_virtchnl_filter’ is not an integer constant
VIRTCHNL_CHECK_STRUCT_LEN(272, virtchnl_filter);
^~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:147:53: note: in definition of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:147:36: warning: division by zero [-Wdiv-by-zero]
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:619:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event);
^~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:619:31: error: enumerator value for ‘virtchnl_static_assert_virtchnl_pf_event’ is not an integer constant
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_pf_event);
^~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:147:53: note: in definition of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:147:36: warning: division by zero [-Wdiv-by-zero]
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:640:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_iwarp_qv_info);
^~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:640:31: error: enumerator value for ‘virtchnl_static_assert_virtchnl_iwarp_qv_info’ is not an integer constant
VIRTCHNL_CHECK_STRUCT_LEN(12, virtchnl_iwarp_qv_info);
^~~~~~~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:147:53: note: in definition of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:147:36: warning: division by zero [-Wdiv-by-zero]
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
./include/linux/avf/virtchnl.h:647:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_iwarp_qvlist_info);
^~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:647:31: error: enumerator value for ‘virtchnl_static_assert_virtchnl_iwarp_qvlist_info’ is not an integer constant
VIRTCHNL_CHECK_STRUCT_LEN(16, virtchnl_iwarp_qvlist_info);
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/avf/virtchnl.h:147:53: note: in definition of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
{ virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
^
Fix this by adding explicit padding to structures with holes.
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-05-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 8 day(s) which contain
a total of 109 files changed, 2776 insertions(+), 2887 deletions(-).
The main changes are:
1) Add a new AF_XDP buffer allocation API to the core in order to help
lowering the bar for drivers adopting AF_XDP support. i40e, ice, ixgbe
as well as mlx5 have been moved over to the new API and also gained a
small improvement in performance, from Björn Töpel and Magnus Karlsson.
2) Add getpeername()/getsockname() attach types for BPF sock_addr programs
in order to allow for e.g. reverse translation of load-balancer backend
to service address/port tuple from a connected peer, from Daniel Borkmann.
3) Improve the BPF verifier is_branch_taken() logic to evaluate pointers
being non-NULL, e.g. if after an initial test another non-NULL test on
that pointer follows in a given path, then it can be pruned right away,
from John Fastabend.
4) Larger rework of BPF sockmap selftests to make output easier to understand
and to reduce overall runtime as well as adding new BPF kTLS selftests
that run in combination with sockmap, also from John Fastabend.
5) Batch of misc updates to BPF selftests including fixing up test_align
to match verifier output again and moving it under test_progs, allowing
bpf_iter selftest to compile on machines with older vmlinux.h, and
updating config options for lirc and v6 segment routing helpers, from
Stanislav Fomichev, Andrii Nakryiko and Alan Maguire.
6) Conversion of BPF tracing samples outdated internal BPF loader to use
libbpf API instead, from Daniel T. Lee.
7) Follow-up to BPF kernel test infrastructure in order to fix a flake in
the XDP selftests, from Jesper Dangaard Brouer.
8) Minor improvements to libbpf's internal hashmap implementation, from
Ian Rogers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since ME systems do not support SLP_S0 in S0ix state, and S0ix entry
and exit flows may cause errors on them it is best to avoid using
e1000e_s0ix_entry_flow and e1000e_s0ix_exit_flow functions.
This was done by creating a struct of all devices that comes with ME
and by checking if the current device has ME.
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Commit b10effb92e27 ("e1000e: fix buffer overrun while the I219 is
processing DMA transactions") imposes roughly 30% performance penalty.
The commit log states that "Disabling TSO eliminates performance loss
for TCP traffic without a noticeable impact on CPU performance", so
let's disable TSO by default to regain the loss.
CC: stable <stable@vger.kernel.org>
Fixes: b10effb92e27 ("e1000e: fix buffer overrun while the I219 is processing DMA transactions")
BugLink: https://bugs.launchpad.net/bugs/1802691
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The hardware may stop working if driver failed to disable ULP mode.
Take the return value of e1000_disable_ulp_lpt_lp() into account, and
pass up the error if it fails.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
igb device gets runtime suspended when there's no link partner. We can't
get correct speed under that state:
$ cat /sys/class/net/enp3s0/speed
1000
In addition to that, an error can also be spotted in dmesg:
[ 385.991957] igb 0000:03:00.0 enp3s0: PCIe link lost
Since device can only be runtime suspended when there's no link partner,
we can skip reading register and let the following logic set speed and
duplex with correct status.
The more generic approach will be wrap get_link_ksettings() with begin()
and complete() callbacks. However, for this particular issue, begin()
calls igb_runtime_resume() , which tries to rtnl_lock() while the lock
is already hold by upper ethtool layer.
So let's take this approach until the igb_runtime_resume() no longer
needs to hold rtnl_lock.
CC: stable <stable@vger.kernel.org>
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Enable Tidv register, Report Packet Sent, Report Status and
Ethernet CRC flags not in use.
This patch comes to clean up these flags.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
During igc_down(), we call igc_nfc_rule_exit() which traverse the NFC
rule list disabling filters one by one. Later on in igc_down() flow
we issue an hardware reset which also clear all filters. Since we
already reset the hardware, we don't actually need to disable each
filter manually. In order to simplify the code, this patch removes
igc_nfc_rule() altogether.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
This patch changes adapter->nfc_rule_lock type from spin_lock to mutex
so we avoid unnecessary busy waiting on lock contention.
A closer look at the execution context of NFC rule API users shows that
all of them run in process context. The API users are: ethtool ops,
igc_configure(), called when interface is brought up by user or reset
workequeue thread, igc_down(), called when interface is brought down,
and igc_remove(), called when driver is unloaded.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
None of igc_disable_nfc_rule() callers actually check its returning
value. A closer look at why this function would fail shows that the
only situation is when we try to delete an Ethertype or MAC filter that
doesn't exist.
That situation is very unlikely so we can change igc_del_etype_filter()
and igc_del_mac_filter() logic to "if the filter doesn't exist, we are
done", and keep the logic in igc_disable_nfc_rule() callers simple.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
If we try to overwrite an existing rule with the same filter but
different action, we get EEXIST error as shown below.
$ ethtool -N eth0 flow-type ether dst <MACADDR> action 1 loc 10
$ ethtool -N eth0 flow-type ether dst <MACADDR> action 2 loc 10
rmgr: Cannot insert RX class rule: File exists
The second command is expected to overwrite the previous rule in location
10 and succeed.
This patch fixes igc_ethtool_check_nfc_rule() so it also checks the
rules location. In case they match, the rule under evaluation should not
be considered invalid.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
If we have RFC rules in adapter->nfc_rule_list when the IGC driver
is unloaded, all rules are leaked. This patch fixes the issue by
introducing the helper igc_flush_nfc_rules() and calling it in
igc_remove(). It also updates igc_set_features() so is reuses the
new helper instead of re-implementing it.
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
