| Age | Commit message (Collapse) | Author |
|---|
|
The UART's input clock rate can change at runtime but this is not
handled by the driver.
Add a clock_notifier callback that updates the divisors when the input
clock is updated. The serial8250_update_uartclk() is used to do so.
PRE_RATE_CHANGE and ABORT_RATE_CHANGE notifications are ignored, only
the POST_RATE_CHANGE is used. Not using PRE_RATE_CHANGE notification can
result in a few corrupted bytes during frequency transitions but, IMHO,
it can be acceptable in many use cases.
It has been tested on a DAVINCI/OMAP-L138 processor.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240405120552.35991-1-bastien.curutchet@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the Actions Semi Owl UART to newer DT schema.
Created DT schema based on the .txt file which had
`compatible`, `reg` and `interrupts` as the
required properties. This binding is used by Actions S500, S700
and S900 SoC. S700 and S900 use the same UART compatible string.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kanak Shilledar <kanakshilledar111@protonmail.com>
Link: https://lore.kernel.org/r/20240405080235.11563-1-kanakshilledar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are considerations to drop platform_driver_probe() as a concept
that isn't relevant any more today. It comes with an added complexity
that makes many users hold it wrong. (E.g. this driver should have
marked the driver struct with __refdata to prevent the below mentioned
false positive section mismatch warning.)
This fixes a W=1 build warning:
WARNING: modpost: drivers/tty/serial/pmac_zilog: section mismatch in reference: pmz_driver+0x8 (section: .data) -> pmz_detach (section: .exit.text)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/5ea3174616abc9fa256f115b4fb175d289ac1754.1711748999.git.u.kleine-koenig@pengutronix.de
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent the following section mismatch warning
WARNING: modpost: drivers/tty/amiserial: section mismatch in reference: amiga_serial_driver+0x8 (section: .data) -> amiga_serial_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/043afcbc94ad90079301f3c7738136a7993a1748.1711748999.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change strips $abs_srctree of the input file containing the
character mapping table in the generated output. The motivation for this
change is Yocto emitting a build warning
WARNING: linux-lxatac-6.7-r0 do_package_qa: QA Issue: File /usr/src/debug/linux-lxatac/6.7-r0/drivers/tty/vt/consolemap_deftbl.c in package linux-lxatac-src contains reference to TMPDIR
So this change brings us one step closer to make the build result
reproducible independent of the build path.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240311113017.483101-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect nc->if_name to be NUL-terminated based on existing manual
NUL-byte assignments and checks:
| nc.if_name[IFNAMSIZ-1] = '\0';
...
| if (nc->if_name[0] != '\0')
Let's use the new 2-argument strscpy() since it guarantees
NUL-termination on the destination buffer while correctly using the
destination buffers size to bound the operation.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240318-strncpy-drivers-tty-n_gsm-c-v1-1-da37a07c642e@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a statement with two semicolons. Remove the second one, it
is redundant.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240315091734.2430416-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
R-Car V4M (R8A779H0) SoC has the R-Car Gen4 compatible SCIF ports, so
document the SoC specific bindings.
Signed-off-by: Nghia Nguyen <nghia.nguyen.jg@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/49b854603c2c3ed6b2edd441f1d55160e0453b70.1709741175.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver is using "sifive,fu540-c000-uart0" as a binding. The device
tree and documentation states "sifive,fu540-c000-uart" instead. This
means the binding is not matched and not used.
This did not cause any problems because the alternative binding, used in
the device tree, "sifive,uart0" is not handling the hardware any
different.
Align the binding in the driver with the documentation.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240307090950.eLELkuyK@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it directly, replace it
with what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240307114243.3642832-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240307114048.3642642-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the console option for DEVNAME:0.0 style addressing for serial
ports.
Suggested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20240327110021.59793-8-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Prepare 8250 ISA ports to drop kernel command line serial console
handling from console_setup().
We need to set the preferred console in serial8250_isa_init_ports()
to drop a dependency to setup_console() handling the ttyS related
quirks. Otherwise when console_setup() handles the ttyS related
options, console gets enabled only at driver probe time.
Note that this mostly affects x86 as this happens based on define
SERIAL_PORT_DFNS.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240327110021.59793-7-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In order to start moving the serial console quirks out of console_setup(),
let's add parsing for the quirks to the serial core layer. We can use
serial_base_add_one_prefcon() to handle the quirks.
Note that eventually we may want to set up driver specific console quirk
handling for the serial port device drivers to use. But we need to figure
out which driver(s) need to call the quirk. So for now, we just handle the
sparc quirk directly.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240327110021.59793-6-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We can now add hardware based addressing for serial ports. Starting with
commit 84a9582fd203 ("serial: core: Start managing serial controllers to
enable runtime PM"), and all the related fixes to this commit, the serial
core now knows to which serial port controller the ports are connected.
The serial ports can be addressed with DEVNAME:0.0 style naming. The names
are something like 00:04:0.0 for a serial port on qemu, and something like
2800000.serial:0.0 on platform device using systems like ARM64 for example.
The DEVNAME is the unique serial port hardware controller device name, AKA
the name for port->dev. The 0.0 are the serial core controller id and port
id.
Typically 0.0 are used for each controller and port instance unless the
serial port hardware controller has multiple controllers or ports.
Using DEVNAME:0.0 style naming actually solves two long term issues for
addressing the serial ports:
1. According to Andy Shevchenko, using DEVNAME:0.0 style naming fixes an
issue where depending on the BIOS settings, the kernel serial port ttyS
instance number may change if HSUART is enabled
2. Device tree using architectures no longer necessarily need to specify
aliases to find a specific serial port, and we can just allocate the
ttyS instance numbers dynamically in whatever probe order
To do this, let's match the hardware addressing style console name to
the character device name used, and add a preferred console using the
character device name.
Note that when using console=DEVNAME:0.0 style kernel command line, the
8250 serial console gets enabled later compared to using console=ttyS
naming for ISA ports. This is because the serial port DEVNAME to character
device mapping is not known until the serial driver probe time. If used
together with earlycon, this issue is avoided.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20240327110021.59793-5-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If add_preferred_console() is not called early in setup_console(), we can
end up having register_console() call try_enable_default_console() before a
console device has called add_preferred_console().
Let's set console_set_on_cmdline flag in console_setup() to prevent this
from happening.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240327110021.59793-4-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently console_setup() tries to make a console index out of any digits
passed in the kernel command line for console. In the DEVNAME:0.0 case,
the name can contain a device IO address, so bail out on console names
with a ':'.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240327110021.59793-3-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Driver subsystems may need to translate the preferred console name to the
character device name used. We already do some of this in console_setup()
with a few hardcoded names, but that does not scale well.
The console options are parsed early in console_setup(), and the consoles
are added with __add_preferred_console(). At this point we don't know much
about the character device names and device drivers getting probed.
To allow driver subsystems to set up a preferred console, let's save the
kernel command line console options. To add a preferred console from a
driver subsystem with optional character device name translation, let's
add a new function add_preferred_console_match().
This allows the serial core layer to support console=DEVNAME:0.0 style
hardware based addressing in addition to the current console=ttyS0 style
naming. And we can start moving console_setup() character device parsing
to the driver subsystem specific code.
We use a separate array from the console_cmdline array as the character
device name and index may be unknown at the console_setup() time. And
eventually there's no need to call __add_preferred_console() until the
subsystem is ready to handle the console.
Adding the console name in addition to the character device name, and a
flag for an added console, could be added to the struct console_cmdline.
And the console_cmdline array handling could be modified accordingly. But
that complicates things compared saving the console options, and then
adding the consoles when the subsystems handling the consoles are ready.
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240327110021.59793-2-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dma_map_single() provides much easier interface for simple mappings as
used for RX in atmel_serial. So switch to that, removing all the s-g
unnecessary handling.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Richard Genoud <richard.genoud@gmail.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240405060826.2521-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is repeated in the code and there is also a big warning by
ATMEL_SERIAL_RINGSIZE. So define ATMEL_SERIAL_RX_SIZE and use it
appropriatelly.
The macro uses array_size() and kmalloc_array() is switched to
kmalloc().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Richard Genoud <richard.genoud@gmail.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240405060826.2521-15-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dma_map_single() provides much easier interface for simple mappings as
used for TX in atmel_serial. So switch to that, removing all the s-g
unnecessary handling.
Note that it is not easy (maybe impossible) to use kfifo_dma_* API for
atmel's serial purposes. It handles DMA very specially.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Richard Genoud <richard.genoud@gmail.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240405060826.2521-14-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Switch from struct circ_buf to proper kfifo. kfifo provides much better
API, esp. when wrap-around of the buffer needs to be taken into account.
Look at pl011_dma_tx_refill() or cpm_uart_tx_pump() changes for example.
Kfifo API can also fill in scatter-gather DMA structures, so it easier
for that use case too. Look at lpuart_dma_tx() for example. Note that
not all drivers can be converted to that (like atmel_serial), they
handle DMA specially.
Note that usb-serial uses kfifo for TX for ages.
omap needed a bit more care as it needs to put a char into FIFO to start
the DMA transfer when OMAP_DMA_TX_KICK is set. In that case, we have to
do kfifo_dma_out_prepare twice: once to find out the tx_size (to find
out if it is worths to do DMA at all -- size >= 4), the second time for
the actual transfer.
All traces of circ_buf are removed from serial_core.h (and its struct
uart_state).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Al Cooper <alcooperx@gmail.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
Cc: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Richard Genoud <richard.genoud@gmail.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Alexander Shiyan <shc_work@mail.ru>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Taichi Sugaya <sugaya.taichi@socionext.com>
Cc: Takao Orito <orito.takao@socionext.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Pali Rohár <pali@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hammer Hsieh <hammerh0314@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Timur Tabi <timur@kernel.org>
Cc: Michal Simek <michal.simek@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20240405060826.2521-13-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a preparatory for the serial-to-kfifo switch. kfifo understands
only scatter-gatter approach, so switch to that.
No functional change intended, it's just dmaengine_prep_slave_single()
inline expanded.
And in this case, switch from dma_map_single() to dma_map_sg() too. This
needs struct msm_dma changes. I split the rx and tx parts into an union.
TX is now struct scatterlist, RX remains the old good phys-virt-count
triple.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Link: https://lore.kernel.org/r/20240405060826.2521-12-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a preparatory for the serial-to-kfifo switch. kfifo understands
only scatter-gatter approach, so switch to that.
No functional change intended, it's just dmaengine_prep_slave_single()
inline expanded.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240405060826.2521-11-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a preparatory for the serial-to-kfifo switch. kfifo understands
only scatter-gatter approach, so switch to that.
No functional change intended, it's just dmaengine_prep_slave_single()
inline expanded.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240405060826.2521-10-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Obviously:
"This macro finish" -> "This macro finishes"
and similar.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405060826.2521-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the kfifo buffer is already dma-mapped, one cannot use the kfifo
API to fill in an SG list.
Add kfifo_dma_in_prepare_mapped() which allows exactly this. A mapped
dma_addr_t is passed and it is filled into provided sgl too. Including
the dma_len.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405060826.2521-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As a preparatory for dma addresses filling, we need the data offset
instead of virtual pointer in setup_sgl_buf(). So pass the former
instead the latter.
And pointer to fifo is needed in setup_sgl_buf() now too.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405060826.2521-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
So that one can make any sense of the name.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405060826.2521-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
First, there is no such user. The only user of this interface is
caam_rng_fill_async() and that uses kfifo_alloc() -> kmalloc().
Second, the implementation does not allow anything else than direct
mapping and kmalloc() (due to virt_to_phys()), anyway.
Therefore, there is no point in having this dead (and complex) code in
the kernel.
Note the setup_sgl_buf() function now boils down to simple sg_set_buf().
That is called twice from setup_sgl() to take care of kfifo buffer
wrap-around.
setup_sgl_buf() will be extended shortly, so keeping it in place.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stefani Seibold <stefani@seibold.net>
Link: https://lore.kernel.org/r/20240405060826.2521-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
These are helpers which are going to be used in the serial layer. We
need a wrapper around kfifo which provides us with a tail (sometimes
"tail" offset, sometimes a pointer) to the kfifo data. And which returns
count of available data -- but not larger than to the end of the buffer
(hence _linear in the names). I.e. something like CIRC_CNT_TO_END() in
the legacy circ_buf.
This patch adds such two helpers.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405060826.2521-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kfifo_skip_count() is an extended version of kfifo_skip(), accepting
also count. This will be useful in the serial code later.
Now, it can be used to implement both kfifo_skip() and
kfifo_dma_out_finish(). In the latter, 'len' only needs to be divided by
'type' size (as it was until now).
And stop using statement expressions when the return value is cast to
'void'. Use classic 'do {} while (0)' instead.
Note: perhaps we should skip 'count' records for the 'recsize' case, but
the original (kfifo_dma_out_finish()) used to skip only one record. So
this is kept unchanged and 'count' is still ignored in the recsize case.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405060826.2521-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is the same as __kfifo_skip_r(), so:
* drop __kfifo_dma_out_finish_r() completely, and
* replace its (only) use by __kfifo_skip_r().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405060826.2521-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix MCE timer reinit locking
- Fix/improve CoCo guest random entropy pool init
- Fix SEV-SNP late disable bugs
- Fix false positive objtool build warning
- Fix header dependency bug
- Fix resctrl CPU offlining bug
* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
x86/CPU/AMD: Track SNP host status with cc_platform_*()
x86/cc: Add cc_platform_set/_clear() helpers
x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
x86/coco: Require seeding RNG with RDRAND on CoCo systems
x86/numa/32: Include missing <asm/pgtable_areas.h>
x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix various timer bugs:
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs"
* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Return early on deactivation
timers/migration: Fix ignored event due to missing CPU update
vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
timers: Fix text inconsistencies and spelling
tick/sched: Fix struct tick_sched doc warnings
tick/sched: Fix various kernel-doc warnings
timers: Fix kernel-doc format and add Return values
time/timekeeping: Fix kernel-doc warnings and typos
time/timecounter: Fix inline documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Ingo Molnar:
"Fix a combined PEBS events bug on x86 Intel CPUs"
* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Address a slow memory leak with RPC-over-TCP
- Prevent another NFS4ERR_DELAY loop during CREATE_SESSION
* tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A host driver build fix"
* tag 'i2c-for-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pxa: hide unused icr_bits[] variable
|
|
Pull xfs fix from Chandan Babu:
- Allow creating new links to special files which were not associated
with a project quota
* tag 'xfs-6.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: allow cross-linking special files without project quota
|
|
Pull smb client fixes from Steve French:
- fix to retry close to avoid potential handle leaks when server
returns EBUSY
- DFS fixes including a fix for potential use after free
- fscache fix
- minor strncpy cleanup
- reconnect race fix
- deal with various possible UAF race conditions tearing sessions down
* tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
smb: client: fix potential UAF in smb2_is_network_name_deleted()
smb: client: fix potential UAF in is_valid_oplock_break()
smb: client: fix potential UAF in smb2_is_valid_oplock_break()
smb: client: fix potential UAF in smb2_is_valid_lease_break()
smb: client: fix potential UAF in cifs_stats_proc_show()
smb: client: fix potential UAF in cifs_stats_proc_write()
smb: client: fix potential UAF in cifs_dump_full_key()
smb: client: fix potential UAF in cifs_debug_files_proc_show()
smb3: retrying on failed server close
smb: client: serialise cifs_construct_tcon() with cifs_mount_mutex
smb: client: handle DFS tcons in cifs_construct_tcon()
smb: client: refresh referral without acquiring refpath_lock
smb: client: guarantee refcounted children from parent session
cifs: Fix caching to try to do open O_WRONLY as rdwr on server
smb: client: fix UAF in smb2_reconnect_server()
smb: client: replace deprecated strncpy with strscpy
|
|
srso_alias_untrain_ret() is special code, even if it is a dummy
which is called in the !SRSO case, so annotate it like its real
counterpart, to address the following objtool splat:
vmlinux.o: warning: objtool: .export_symbol+0x2b290: data relocation to !ENDBR: srso_alias_untrain_ret+0x0
Fixes: 4535e1a4174c ("x86/bugs: Fix the SRSO mitigation on Zen3/4")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405144637.17908-1-bp@kernel.org
|
|
We want to fix:
0e110732473e ("x86/retpoline: Do the necessary fixup to the Zen3/4 srso return thunk for !SRSO")
So merge in Linus's latest into x86/urgent to have it available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
An unused const variable kind of error has been fixed by placing
the definition of icr_bits[] inside the ifdef block where it is
used.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"The firewire-ohci kernel module has a parameter for verbose kernel
logging. It is well-known that it logs the spurious IRQ for bus-reset
event due to the unmasked register for IRQ event. This update fixes
the issue"
* tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: mask bus reset interrupts between ISR and bottom half
|
|
In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.
Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in
a007bb857e0b26f5d8b73c2ff90782d9c0972620: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.
irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.
This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.
irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.
As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.
Signed-off-by: Adam Goldman <adamg@pobox.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes, the most important being the
s3c64xx change which is likely to be hit during normal operation"
* tag 'spi-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe
spi: spi-fsl-lpspi: remove redundant spi_controller_put call
spi: s3c64xx: Use DMA mode from fifo size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One simple regualtor fix, fixing module autoloading on tps65132"
* tag 'regulator-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65132: Add of_match table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"Richard found a nasty corner case in the maple tree code which he
fixed, and also fixed a compiler warning which was showing up with the
toolchain he uses and helpfully identified a possible incorrect error
code which could have runtime impacts"
* tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: maple: Fix uninitialized symbol 'ret' warnings
regmap: maple: Fix cache corruption in regcache_maple_drop()
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Atomic queue limits fixes (Christoph)
- Fabrics fixes (Hannes, Daniel)
- Discard overflow fix (Li)
- Cleanup fix for null_blk (Damien)
* tag 'block-6.9-20240405' of git://git.kernel.dk/linux:
nvme-fc: rename free_ctrl callback to match name pattern
nvmet-fc: move RCU read lock to nvmet_fc_assoc_exists
nvmet: implement unique discovery NQN
nvme: don't create a multipath node for zero capacity devices
nvme: split nvme_update_zone_info
nvme-multipath: don't inherit LBA-related fields for the multipath node
block: fix overflow in blk_ioctl_discard()
nullblk: Fix cleanup order in null_add_dev() error path
|
