| Age | Commit message (Collapse) | Author |
|---|
|
Prepare move from NHLT code to common directory, starting with header.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
88200 and 96000 sampling rate was not enabled on driver, so can't be played.
The error information:
max98373 3-0031：rate 96000 not supported
max98373 3-0031：ASoC: can't set max98373-aif1 hw params: -22
Signed-off-by: fengchunguo <chunguo.feng@amlogic.com>
Link: https://lore.kernel.org/r/20190731074156.5620-1-chunguo.feng@amlogic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The A64 audio codec uses the original I2S block but the SR and
WSS computation currently assigned is for the newer block.
Fixes: 619c15f7fac9 (ASoC: sun4i-i2s: Change SR and WSS computation)
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Link: https://lore.kernel.org/r/20190729152130.27955-1-codekipper@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adding myself to Intel ASoC drivers maintainers list.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190726181517.27655-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
syzbot found the following crash on:
general protection fault: 0000 [#1] SMP KASAN
RIP: 0010:snd_usb_pipe_sanity_check+0x80/0x130 sound/usb/helper.c:75
Call Trace:
snd_usb_motu_microbookii_communicate.constprop.0+0xa0/0x2fb sound/usb/quirks.c:1007
snd_usb_motu_microbookii_boot_quirk sound/usb/quirks.c:1051 [inline]
snd_usb_apply_boot_quirk.cold+0x163/0x370 sound/usb/quirks.c:1280
usb_audio_probe+0x2ec/0x2010 sound/usb/card.c:576
usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
really_probe+0x281/0x650 drivers/base/dd.c:548
....
It was introduced in commit 801ebf1043ae for checking pipe and endpoint
types. It is fixed by adding a check of the ep pointer in question.
BugLink: https://syzkaller.appspot.com/bug?extid=d59c4387bfb6eced94e2
Reported-by: syzbot <syzbot+d59c4387bfb6eced94e2@syzkaller.appspotmail.com>
Fixes: 801ebf1043ae ("ALSA: usb-audio: Sanity checks for each pipe and EP types")
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: sparc64):
sound/sparc/dbri.c: In function ‘reverse_bytes’:
sound/sparc/dbri.c:582:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
b = ((b & 0xffff0000) >> 16) | ((b & 0x0000ffff) << 16);
~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/sparc/dbri.c:583:2: note: here
case 16:
^~~~
sound/sparc/dbri.c:584:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
b = ((b & 0xff00ff00) >> 8) | ((b & 0x00ff00ff) << 8);
~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/sparc/dbri.c:585:2: note: here
case 8:
^~~~
sound/sparc/dbri.c:586:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
b = ((b & 0xf0f0f0f0) >> 4) | ((b & 0x0f0f0f0f) << 4);
~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/sparc/dbri.c:587:2: note: here
case 4:
^~~~
sound/sparc/dbri.c:588:5: warning: this statement may fall through [-Wimplicit-fallthrough=]
b = ((b & 0xcccccccc) >> 2) | ((b & 0x33333333) << 2);
~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/sparc/dbri.c:589:2: note: here
case 2:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: m68k):
sound/oss/dmasound/dmasound_atari.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 1449:24
Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
lost wakeup can occur after enabling irq, therefore put task
into interruptible before enabling interrupts,
without this change, task can be put to sleep and snd_pcm_drain
will delay
Fixes: f2b3614cefb6 ("ALSA: PCM - Don't check DMA time-out too shortly")
Signed-off-by: Yuki Tsunashima <ytsunashima@jp.adit-jv.com>
Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com>
[ported from 4.9]
Signed-off-by: Adam Miartus <amiartus@de.adit-jv.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A lot of places in the driver use onyx_read_register() without
checking the return value, and it's been working OK for ~10 years
or so, so probably never fails ... Rather than trying to check the
return value everywhere, which would be relatively intrusive, at
least make sure we don't use an uninitialized value.
Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add mixer quirk for the Focusrite Scarlett 6i6, 18i8, and 18i20 Gen 2
audio interfaces. Although the interfaces are USB compliant,
additional input/output level controls and hardware routing/mixing
functionality are available using proprietary USB requests.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Distribution installation images such as Debian include different sets
of modules which can be downloaded dynamically. Such images may notably
include the hda sound modules but not the i915 DRM module, even if the
latter was enabled at build time, as reported on
https://bugs.debian.org/931507
In such a case hdac_i915 would be linked in and try to load the i915
module, fail since it is not there, but still wait for a whole minute
before giving up binding with it.
This fixes such as case by only waiting for the binding if the module
was properly loaded (or module support is disabled, in which case i915
is already compiled-in anyway).
Fixes: f9b54e1961c7 ("ALSA: hda/i915: Allow delayed i915 audio component binding")
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
build_adc_controls()
In build_adc_controls(), there is an if statement on line 773 to check
whether ak->adc_info is NULL:
if (! ak->adc_info ||
! ak->adc_info[mixer_ch].switch_name)
When ak->adc_info is NULL, it is used on line 792:
knew.name = ak->adc_info[mixer_ch].selector_name;
Thus, a possible null-pointer dereference may occur.
To fix this bug, referring to lines 773 and 774, ak->adc_info
and ak->adc_info[mixer_ch].selector_name are checked before being used.
This bug is found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The last fallback of CORB/RIRB communication error recovery is to turn
on the single command mode, and this last resort usually means that
something is really screwed up. Instead of a normal dev_err(), show
the error more clearly with dev_WARN() with the caller stack trace.
Also, show the bus-reset fallback also as an error, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The slot_width is a property for the bus while the constraint for
SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format.
Applying slot_width constraint to sample_bits works most of the time, but
it will blacklist valid formats in some cases.
With slot_width 24 we can support S24_3LE and S24_LE formats as they both
look the same on the bus, but a a 24 constraint on sample_bits would not
allow S24_LE as it is stored in 32bits in memory.
Implement a simple hw_rule function to allow all formats which require less
or equal number of bits on the bus as slot_width (if configured).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190726064244.3762-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit db51707b9c9aeedd310ebce60f15d5bb006567e0.
Revert "ASoC: rockchip: i2s: Support mono capture"
Previous discussion in
https://patchwork.kernel.org/patch/10147153/
explains the issue of the patch.
While device is configured as 1-ch, hardware is still
generating a 2-ch stream.
When user space reads the data and assumes it is a 1-ch stream,
the rate will be slower by 2x.
Revert the change so 1-ch is not supported.
User space can selectively take one channel data out of two channel
if 1-ch is preferred.
Currently, both channels record identical data.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20190726044202.26866-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix some typo to have the filaname given in a comment match the real name
of the file.
Some 'acpi' have erroneously been written 'apci'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190725053523.16542-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When running McASP as master capture alone will not record any audio unless
a parallel playback stream is running. As soon as the playback stops the
captured data is going to be silent again.
In McASP master mode we need to set the PDIR for the clock pins and fix
the mcasp_set_axr_pdir() to skip the bits in the PDIR registers above
AMUTE.
This went unnoticed as most of the boards uses McASP as slave and neither
of these issues are visible (audible) in those setups.
Fixes: ca3d9433349e ("ASoC: davinci-mcasp: Update PDIR (pin direction) register handling")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190725083423.7321-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of using kmalloc + memcpy, use kmemdup
to simplify the code.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This conexant codec isn't in the supported codec list yet, the hda
generic driver can drive this codec well, but on a Lenovo machine
with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI
to make the leds work. After adding this codec to the list, the
driver patch_conexant.c will apply THINKPAD_ACPI to this machine.
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
It turned out that the recent Intel HD-audio controller chips show a
significant stall during the system PM resume intermittently. It
doesn't happen so often and usually it may read back successfully
after one or more seconds, but in some rare worst cases the driver
went into fallback mode.
After trial-and-error, we found out that the communication stall seems
covered by issuing the sync after each verb write, as already done for
AMD and other chipsets. So this patch enables the write-sync flag for
the recent Intel chips, Skylake and onward, as a workaround.
Also, since Broxton and co have the very same driver flags as Skylake,
refer to the Skylake driver flags instead of defining the same
contents again for simplification.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201901
Reported-and-tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If the DAI format setup fails, there is no valid communication format
between CPU and CODEC, so fail card instantiation, rather than continue
with a card that will most likely not function properly.
Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.20.1907241132350.6338@lnxricardw1.se.axis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
sizeof (byte) is always 1, use that fact and make interesting code explicit.
Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
put_device will call ac97_codec_release to free
ac97_codec_device and other resources, so remove the kfree
and other redundant code.
Fixes: 74426fbff66e ("ALSA: ac97: add an ac97 bus")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Downgrade "nothing to do in IRQ thread" message from error to a debug
message in the IPC interrupt handler thread.
The spurious wake-up can happen if a HDA stream interrupt is
raised while the IPC interrupt thread is running. IPC functionality
is not impacted by this condition, so debug is a more appropriate
trace level.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
apq8016_sbc_parse_of() sets up multiple DAI links, depending on the
number of nodes in the device tree. However, at the moment
CPU and platform components are only allocated for the first link.
This causes an oops when more than one link is defined:
Internal error: Oops: 96000044 [#1] SMP
CPU: 0 PID: 1015 Comm: kworker/0:2 Not tainted 5.3.0-rc1 #4
Call trace:
apq8016_sbc_platform_probe+0x1a8/0x3f0
platform_drv_probe+0x50/0xa0
...
Move the allocation inside the loop to ensure that each link is
properly initialized.
Fixes: 98b232ca9e0e ("ASoC: qcom: apq8016_sbc: use modern dai_link style")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20190722130352.95874-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Draining makes little sense in the situation of hardware overrun, as the
hardware will have consumed all its available samples. Additionally,
draining whilst the stream is paused would presumably get stuck as no
data is being consumed on the DSP side.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Partial drain and next track are intended for gapless playback and
don't really have an obvious interpretation for a capture stream, so
makes sense to not allow those operations on capture streams.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call
snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which
allow a transition to SNDRV_PCM_STATE_SETUP. The stream should
only be able to move to the setup state once it has received a
SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing
those ioctls whilst in the open state.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.
To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.
Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In snd_soc_dapm_new_control_unlocked(), a kernel buffer is allocated in
dapm_cnew_widget() to hold the new dapm widget. Then, different actions are
taken according to the id of the widget, i.e., 'w->id'. If any failure
occurs during this process, snd_soc_dapm_new_control_unlocked() should be
terminated by going to the 'request_failed' label. However, the allocated
kernel buffer is not freed on this code path, leading to a memory leak bug.
To fix the above issue, free the buffer before returning from
snd_soc_dapm_new_control_unlocked() through the 'request_failed' label.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Link: https://lore.kernel.org/r/1563803864-2809-1-git-send-email-wang6495@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
MOTU data block processing layer has some tracepoints events. This
commit is code refactoring to split probing the events from processing
data blocks.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
descriptors
This commit changes each of data block processing layer so that it
receives list of packet descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is code refactoring for FF data block processing layer so that
it can receive list of packet descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is code refactoring for MOTU data block processing layer so that
it can receive list of packet descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is code refactoring for TASCAM data block processing layer so that
it can receive list of packet descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is code refactoring for DOT data block processing layer so that
it can receive list of packet descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is code refactoring for AM824 data block processing layer so that
it can receive list of packet descriptor.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit changes signature of callback function to call data block
processing layer with packet descriptor. At present, the layer is called
per packet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is code refactoring for common processing for payloads of
ishocornous context.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is code refactoring to separate PCM substream processing from packet
queueing.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit uses packet descriptor to parse headers of IR context and
parse timing information for sequence transferred by target device.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This commit uses packet descriptor to parse headers of IT context and
generate timing information for ideal sequence.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In current implementation of ALSA IEC 61883-1/6 packet streaming engine,
16 packets are handled in one interrupt of isochronous context of OHCI
1394.
Overall packet processing runs for each. However, this is not better in
a point to split the processing into several parts.
This commit is an attempt to add intermediate representation for
parameters required for the parts.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In a previous commit, the variable passed from packet streaming layer
for syt variable is useless. This commit obsoletes it.
In my future work, the syt information is passed to data block processing
layer by another way.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some protocols don't use syt field of CIP header to represent
presentation timestamp. For such protocol, ALSA IEC 61883-1/6
packet streaming engine uses a pointer into local variable for
the value of syt to call data block processing layer. However,
it can decide the value when initializing packet streaming
layer.
This commit adds 'syt_override' member for packet streaming
layer.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
for IR context
In ALSA IEC 61883-1/6 packet streaming engine, two types of data block
counter are supported. This commit applies code refactoring to make it
explicitly for IR context.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
for IT context
In ALSA IEC 61883-1/6 packet streaming engine, two types of data block
counter are supported. This commit applies code refactoring to make it
explicitly for IT context.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is a preparation for future commit that 'struct
amdtp_stream.data_block_count' does not represent the value of
data block count for current data block.
However, data block count is required for calculation of sequence index
in sequence-multiplied data channel. Some of data block processing layer
require it; e.g. for AM824 data block.
This commit passes data block count to the processing layer.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is a preparation for future commit that 'struct
amdtp_stream.data_block_count' does not represent the value of
data block count for current data block.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Recent firmware for Fireworks board module have a quirk to start
transmission of CIP with non-zero value for its data block counter.
In current implementation of ALSA firewire stack, the quirk is handled
by 'struct amdtp_stream.ctx_data.tx.first_dbc' with value 0x02. However,
the value comes from reverse engineering. It's better to handle this
quirk without the explicit value.
In a process to parse CIP header, the quirk of data block counter
affects decision of sequence index in sequence-multiplexed data channel;
i.e. MIDI conformant data channel. In Fireworks, the index is decided
by the number of data blocks from top of the same CIP, thus the value
of data block counter is useless.
This commit adds CIP_UNALIGHED_DBC flag and obsoletes the explicit
value for this quirk.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
