summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-27Merge tag 'linux-can-fixes-for-6.3-20230327' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2023-03-27 Oleksij Rempel and Hillf Danton contribute a patch for the CAN J1939 protocol that prevents a potential deadlock in j1939_sk_errqueue(). Ivan Orlov fixes an uninit-value in the CAN BCM protocol in the bcm_tx_setup() function. * tag 'linux-can-fixes-for-6.3-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_write can: j1939: prevent deadlock by moving j1939_sk_errqueue() ==================== Link: https://lore.kernel.org/r/20230327124807.1157134-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-27MAINTAINERS: remove the linux-nfc@lists.01.org listLukas Bulwahn
Some MAINTAINERS sections mention to mail patches to the list linux-nfc@lists.01.org. Probably due to changes on Intel's 01.org website and servers, the list server lists.01.org/ml01.01.org is simply gone. Considering emails recorded on lore.kernel.org, only a handful of emails where sent to the linux-nfc@lists.01.org list, and they are usually also sent to the netdev mailing list as well, where they are then picked up. So, there is no big benefit in restoring the linux-nfc elsewhere. Remove all occurrences of the linux-nfc@lists.01.org list in MAINTAINERS. Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/all/CAKXUXMzggxQ43DUZZRkPMGdo5WkzgA=i14ySJUFw4kZfE5ZaZA@mail.gmail.com/ Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230324081613.32000-1-lukas.bulwahn@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-27net: fman: Add myself as a reviewerSean Anderson
I've read through or reworked a good portion of this driver. Add myself as a reviewer. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Link: https://lore.kernel.org/r/20230323145957.2999211-1-sean.anderson@seco.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-28nvme-pci: mark Lexar NM760 as IGNORE_DEV_SUBNQNJuraj Pecigos
A system with more than one of these SSDs will only have one usable. The kernel fails to detect more than one nvme device due to duplicate cntlids. before: [ 9.395229] nvme 0000:01:00.0: platform quirk: setting simple suspend [ 9.395262] nvme nvme0: pci function 0000:01:00.0 [ 9.395282] nvme 0000:03:00.0: platform quirk: setting simple suspend [ 9.395305] nvme nvme1: pci function 0000:03:00.0 [ 9.409873] nvme nvme0: Duplicate cntlid 1 with nvme1, subsys nqn.2022-07.com.siliconmotion:nvm-subsystem-sn- , rejecting [ 9.409982] nvme nvme0: Removing after probe failure status: -22 [ 9.427487] nvme nvme1: allocated 64 MiB host memory buffer. [ 9.445088] nvme nvme1: 16/0/0 default/read/poll queues [ 9.449898] nvme nvme1: Ignoring bogus Namespace Identifiers after: [ 1.161890] nvme 0000:01:00.0: platform quirk: setting simple suspend [ 1.162660] nvme nvme0: pci function 0000:01:00.0 [ 1.162684] nvme 0000:03:00.0: platform quirk: setting simple suspend [ 1.162707] nvme nvme1: pci function 0000:03:00.0 [ 1.191354] nvme nvme0: allocated 64 MiB host memory buffer. [ 1.193378] nvme nvme1: allocated 64 MiB host memory buffer. [ 1.211044] nvme nvme1: 16/0/0 default/read/poll queues [ 1.211080] nvme nvme0: 16/0/0 default/read/poll queues [ 1.216145] nvme nvme0: Ignoring bogus Namespace Identifiers [ 1.216261] nvme nvme1: Ignoring bogus Namespace Identifiers Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue. Signed-off-by: Juraj Pecigos <kernel@juraj.dev> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-03-28ASoC: da7213.c: add missing pm_runtime_disable()Duy Nguyen
da7213.c is missing pm_runtime_disable(), thus we will get below error when rmmod -> insmod. $ rmmod snd-soc-da7213.ko $ insmod snd-soc-da7213.ko da7213 0-001a: Unbalanced pm_runtime_enable!" [Kuninori adjusted to latest upstream] Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Khanh Le <khanh.le.xr@renesas.com> Link: https://lore.kernel.org/r/87mt3xg2tk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-28btrfs: fix deadlock when aborting transaction during relocation with scrubFilipe Manana
Before relocating a block group we pause scrub, then do the relocation and then unpause scrub. The relocation process requires starting and committing a transaction, and if we have a failure in the critical section of the transaction commit path (transaction state >= TRANS_STATE_COMMIT_START), we will deadlock if there is a paused scrub. That results in stack traces like the following: [42.479] BTRFS info (device sdc): relocating block group 53876686848 flags metadata|raid6 [42.936] BTRFS warning (device sdc): Skipping commit of aborted transaction. [42.936] ------------[ cut here ]------------ [42.936] BTRFS: Transaction aborted (error -28) [42.936] WARNING: CPU: 11 PID: 346822 at fs/btrfs/transaction.c:1977 btrfs_commit_transaction+0xcc8/0xeb0 [btrfs] [42.936] Modules linked in: dm_flakey dm_mod loop btrfs (...) [42.936] CPU: 11 PID: 346822 Comm: btrfs Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [42.936] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [42.936] RIP: 0010:btrfs_commit_transaction+0xcc8/0xeb0 [btrfs] [42.936] Code: ff ff 45 8b (...) [42.936] RSP: 0018:ffffb58649633b48 EFLAGS: 00010282 [42.936] RAX: 0000000000000000 RBX: ffff8be6ef4d5bd8 RCX: 0000000000000000 [42.936] RDX: 0000000000000002 RSI: ffffffffb35e7782 RDI: 00000000ffffffff [42.936] RBP: ffff8be6ef4d5c98 R08: 0000000000000000 R09: ffffb586496339e8 [42.936] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8be6d38c7c00 [42.936] R13: 00000000ffffffe4 R14: ffff8be6c268c000 R15: ffff8be6ef4d5cf0 [42.936] FS: 00007f381a82b340(0000) GS:ffff8beddfcc0000(0000) knlGS:0000000000000000 [42.936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [42.936] CR2: 00007f1e35fb7638 CR3: 0000000117680006 CR4: 0000000000370ee0 [42.936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [42.936] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [42.936] Call Trace: [42.936] <TASK> [42.936] ? start_transaction+0xcb/0x610 [btrfs] [42.936] prepare_to_relocate+0x111/0x1a0 [btrfs] [42.936] relocate_block_group+0x57/0x5d0 [btrfs] [42.936] ? btrfs_wait_nocow_writers+0x25/0xb0 [btrfs] [42.936] btrfs_relocate_block_group+0x248/0x3c0 [btrfs] [42.936] ? __pfx_autoremove_wake_function+0x10/0x10 [42.936] btrfs_relocate_chunk+0x3b/0x150 [btrfs] [42.936] btrfs_balance+0x8ff/0x11d0 [btrfs] [42.936] ? __kmem_cache_alloc_node+0x14a/0x410 [42.936] btrfs_ioctl+0x2334/0x32c0 [btrfs] [42.937] ? mod_objcg_state+0xd2/0x360 [42.937] ? refill_obj_stock+0xb0/0x160 [42.937] ? seq_release+0x25/0x30 [42.937] ? __rseq_handle_notify_resume+0x3b5/0x4b0 [42.937] ? percpu_counter_add_batch+0x2e/0xa0 [42.937] ? __x64_sys_ioctl+0x88/0xc0 [42.937] __x64_sys_ioctl+0x88/0xc0 [42.937] do_syscall_64+0x38/0x90 [42.937] entry_SYSCALL_64_after_hwframe+0x72/0xdc [42.937] RIP: 0033:0x7f381a6ffe9b [42.937] Code: 00 48 89 44 24 (...) [42.937] RSP: 002b:00007ffd45ecf060 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [42.937] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f381a6ffe9b [42.937] RDX: 00007ffd45ecf150 RSI: 00000000c4009420 RDI: 0000000000000003 [42.937] RBP: 0000000000000003 R08: 0000000000000013 R09: 0000000000000000 [42.937] R10: 00007f381a60c878 R11: 0000000000000246 R12: 00007ffd45ed0423 [42.937] R13: 00007ffd45ecf150 R14: 0000000000000000 R15: 00007ffd45ecf148 [42.937] </TASK> [42.937] ---[ end trace 0000000000000000 ]--- [42.937] BTRFS: error (device sdc: state A) in cleanup_transaction:1977: errno=-28 No space left [59.196] INFO: task btrfs:346772 blocked for more than 120 seconds. [59.196] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [59.196] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [59.196] task:btrfs state:D stack:0 pid:346772 ppid:1 flags:0x00004002 [59.196] Call Trace: [59.196] <TASK> [59.196] __schedule+0x392/0xa70 [59.196] ? __pv_queued_spin_lock_slowpath+0x165/0x370 [59.196] schedule+0x5d/0xd0 [59.196] __scrub_blocked_if_needed+0x74/0xc0 [btrfs] [59.197] ? __pfx_autoremove_wake_function+0x10/0x10 [59.197] scrub_pause_off+0x21/0x50 [btrfs] [59.197] scrub_simple_mirror+0x1c7/0x950 [btrfs] [59.197] ? scrub_parity_put+0x1a5/0x1d0 [btrfs] [59.198] ? __pfx_autoremove_wake_function+0x10/0x10 [59.198] scrub_stripe+0x20d/0x740 [btrfs] [59.198] scrub_chunk+0xc4/0x130 [btrfs] [59.198] scrub_enumerate_chunks+0x3e4/0x7a0 [btrfs] [59.198] ? __pfx_autoremove_wake_function+0x10/0x10 [59.198] btrfs_scrub_dev+0x236/0x6a0 [btrfs] [59.199] ? btrfs_ioctl+0xd97/0x32c0 [btrfs] [59.199] ? _copy_from_user+0x7b/0x80 [59.199] btrfs_ioctl+0xde1/0x32c0 [btrfs] [59.199] ? refill_stock+0x33/0x50 [59.199] ? should_failslab+0xa/0x20 [59.199] ? kmem_cache_alloc_node+0x151/0x460 [59.199] ? alloc_io_context+0x1b/0x80 [59.199] ? preempt_count_add+0x70/0xa0 [59.199] ? __x64_sys_ioctl+0x88/0xc0 [59.199] __x64_sys_ioctl+0x88/0xc0 [59.199] do_syscall_64+0x38/0x90 [59.199] entry_SYSCALL_64_after_hwframe+0x72/0xdc [59.199] RIP: 0033:0x7f82ffaffe9b [59.199] RSP: 002b:00007f82ff9fcc50 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [59.199] RAX: ffffffffffffffda RBX: 000055b191e36310 RCX: 00007f82ffaffe9b [59.199] RDX: 000055b191e36310 RSI: 00000000c400941b RDI: 0000000000000003 [59.199] RBP: 0000000000000000 R08: 00007fff1575016f R09: 0000000000000000 [59.199] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f82ff9fd640 [59.199] R13: 000000000000006b R14: 00007f82ffa87580 R15: 0000000000000000 [59.199] </TASK> [59.199] INFO: task btrfs:346773 blocked for more than 120 seconds. [59.200] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [59.200] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [59.201] task:btrfs state:D stack:0 pid:346773 ppid:1 flags:0x00004002 [59.201] Call Trace: [59.201] <TASK> [59.201] __schedule+0x392/0xa70 [59.201] ? __pv_queued_spin_lock_slowpath+0x165/0x370 [59.201] schedule+0x5d/0xd0 [59.201] __scrub_blocked_if_needed+0x74/0xc0 [btrfs] [59.201] ? __pfx_autoremove_wake_function+0x10/0x10 [59.201] scrub_pause_off+0x21/0x50 [btrfs] [59.202] scrub_simple_mirror+0x1c7/0x950 [btrfs] [59.202] ? scrub_parity_put+0x1a5/0x1d0 [btrfs] [59.202] ? __pfx_autoremove_wake_function+0x10/0x10 [59.202] scrub_stripe+0x20d/0x740 [btrfs] [59.202] scrub_chunk+0xc4/0x130 [btrfs] [59.203] scrub_enumerate_chunks+0x3e4/0x7a0 [btrfs] [59.203] ? __pfx_autoremove_wake_function+0x10/0x10 [59.203] btrfs_scrub_dev+0x236/0x6a0 [btrfs] [59.203] ? btrfs_ioctl+0xd97/0x32c0 [btrfs] [59.203] ? _copy_from_user+0x7b/0x80 [59.203] btrfs_ioctl+0xde1/0x32c0 [btrfs] [59.204] ? should_failslab+0xa/0x20 [59.204] ? kmem_cache_alloc_node+0x151/0x460 [59.204] ? alloc_io_context+0x1b/0x80 [59.204] ? preempt_count_add+0x70/0xa0 [59.204] ? __x64_sys_ioctl+0x88/0xc0 [59.204] __x64_sys_ioctl+0x88/0xc0 [59.204] do_syscall_64+0x38/0x90 [59.204] entry_SYSCALL_64_after_hwframe+0x72/0xdc [59.204] RIP: 0033:0x7f82ffaffe9b [59.204] RSP: 002b:00007f82ff1fbc50 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [59.204] RAX: ffffffffffffffda RBX: 000055b191e36790 RCX: 00007f82ffaffe9b [59.204] RDX: 000055b191e36790 RSI: 00000000c400941b RDI: 0000000000000003 [59.204] RBP: 0000000000000000 R08: 00007fff1575016f R09: 0000000000000000 [59.204] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f82ff1fc640 [59.204] R13: 000000000000006b R14: 00007f82ffa87580 R15: 0000000000000000 [59.204] </TASK> [59.204] INFO: task btrfs:346774 blocked for more than 120 seconds. [59.205] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [59.205] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [59.206] task:btrfs state:D stack:0 pid:346774 ppid:1 flags:0x00004002 [59.206] Call Trace: [59.206] <TASK> [59.206] __schedule+0x392/0xa70 [59.206] schedule+0x5d/0xd0 [59.206] __scrub_blocked_if_needed+0x74/0xc0 [btrfs] [59.206] ? __pfx_autoremove_wake_function+0x10/0x10 [59.206] scrub_pause_off+0x21/0x50 [btrfs] [59.207] scrub_simple_mirror+0x1c7/0x950 [btrfs] [59.207] ? scrub_parity_put+0x1a5/0x1d0 [btrfs] [59.207] ? __pfx_autoremove_wake_function+0x10/0x10 [59.207] scrub_stripe+0x20d/0x740 [btrfs] [59.208] scrub_chunk+0xc4/0x130 [btrfs] [59.208] scrub_enumerate_chunks+0x3e4/0x7a0 [btrfs] [59.208] ? __mutex_unlock_slowpath.isra.0+0x9a/0x120 [59.208] btrfs_scrub_dev+0x236/0x6a0 [btrfs] [59.208] ? btrfs_ioctl+0xd97/0x32c0 [btrfs] [59.209] ? _copy_from_user+0x7b/0x80 [59.209] btrfs_ioctl+0xde1/0x32c0 [btrfs] [59.209] ? should_failslab+0xa/0x20 [59.209] ? kmem_cache_alloc_node+0x151/0x460 [59.209] ? alloc_io_context+0x1b/0x80 [59.209] ? preempt_count_add+0x70/0xa0 [59.209] ? __x64_sys_ioctl+0x88/0xc0 [59.209] __x64_sys_ioctl+0x88/0xc0 [59.209] do_syscall_64+0x38/0x90 [59.209] entry_SYSCALL_64_after_hwframe+0x72/0xdc [59.209] RIP: 0033:0x7f82ffaffe9b [59.209] RSP: 002b:00007f82fe9fac50 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [59.209] RAX: ffffffffffffffda RBX: 000055b191e36c10 RCX: 00007f82ffaffe9b [59.209] RDX: 000055b191e36c10 RSI: 00000000c400941b RDI: 0000000000000003 [59.209] RBP: 0000000000000000 R08: 00007fff1575016f R09: 0000000000000000 [59.209] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f82fe9fb640 [59.209] R13: 000000000000006b R14: 00007f82ffa87580 R15: 0000000000000000 [59.209] </TASK> [59.209] INFO: task btrfs:346775 blocked for more than 120 seconds. [59.210] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [59.210] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [59.211] task:btrfs state:D stack:0 pid:346775 ppid:1 flags:0x00004002 [59.211] Call Trace: [59.211] <TASK> [59.211] __schedule+0x392/0xa70 [59.211] schedule+0x5d/0xd0 [59.211] __scrub_blocked_if_needed+0x74/0xc0 [btrfs] [59.211] ? __pfx_autoremove_wake_function+0x10/0x10 [59.211] scrub_pause_off+0x21/0x50 [btrfs] [59.212] scrub_simple_mirror+0x1c7/0x950 [btrfs] [59.212] ? scrub_parity_put+0x1a5/0x1d0 [btrfs] [59.212] ? __pfx_autoremove_wake_function+0x10/0x10 [59.212] scrub_stripe+0x20d/0x740 [btrfs] [59.213] scrub_chunk+0xc4/0x130 [btrfs] [59.213] scrub_enumerate_chunks+0x3e4/0x7a0 [btrfs] [59.213] ? __mutex_unlock_slowpath.isra.0+0x9a/0x120 [59.213] btrfs_scrub_dev+0x236/0x6a0 [btrfs] [59.213] ? btrfs_ioctl+0xd97/0x32c0 [btrfs] [59.214] ? _copy_from_user+0x7b/0x80 [59.214] btrfs_ioctl+0xde1/0x32c0 [btrfs] [59.214] ? should_failslab+0xa/0x20 [59.214] ? kmem_cache_alloc_node+0x151/0x460 [59.214] ? alloc_io_context+0x1b/0x80 [59.214] ? preempt_count_add+0x70/0xa0 [59.214] ? __x64_sys_ioctl+0x88/0xc0 [59.214] __x64_sys_ioctl+0x88/0xc0 [59.214] do_syscall_64+0x38/0x90 [59.214] entry_SYSCALL_64_after_hwframe+0x72/0xdc [59.214] RIP: 0033:0x7f82ffaffe9b [59.214] RSP: 002b:00007f82fe1f9c50 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [59.214] RAX: ffffffffffffffda RBX: 000055b191e37090 RCX: 00007f82ffaffe9b [59.214] RDX: 000055b191e37090 RSI: 00000000c400941b RDI: 0000000000000003 [59.214] RBP: 0000000000000000 R08: 00007fff1575016f R09: 0000000000000000 [59.214] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f82fe1fa640 [59.214] R13: 000000000000006b R14: 00007f82ffa87580 R15: 0000000000000000 [59.214] </TASK> [59.214] INFO: task btrfs:346776 blocked for more than 120 seconds. [59.215] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [59.216] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [59.217] task:btrfs state:D stack:0 pid:346776 ppid:1 flags:0x00004002 [59.217] Call Trace: [59.217] <TASK> [59.217] __schedule+0x392/0xa70 [59.217] ? __pv_queued_spin_lock_slowpath+0x165/0x370 [59.217] schedule+0x5d/0xd0 [59.217] __scrub_blocked_if_needed+0x74/0xc0 [btrfs] [59.217] ? __pfx_autoremove_wake_function+0x10/0x10 [59.217] scrub_pause_off+0x21/0x50 [btrfs] [59.217] scrub_simple_mirror+0x1c7/0x950 [btrfs] [59.217] ? scrub_parity_put+0x1a5/0x1d0 [btrfs] [59.218] ? __pfx_autoremove_wake_function+0x10/0x10 [59.218] scrub_stripe+0x20d/0x740 [btrfs] [59.218] scrub_chunk+0xc4/0x130 [btrfs] [59.218] scrub_enumerate_chunks+0x3e4/0x7a0 [btrfs] [59.219] ? __pfx_autoremove_wake_function+0x10/0x10 [59.219] btrfs_scrub_dev+0x236/0x6a0 [btrfs] [59.219] ? btrfs_ioctl+0xd97/0x32c0 [btrfs] [59.219] ? _copy_from_user+0x7b/0x80 [59.219] btrfs_ioctl+0xde1/0x32c0 [btrfs] [59.219] ? should_failslab+0xa/0x20 [59.219] ? kmem_cache_alloc_node+0x151/0x460 [59.219] ? alloc_io_context+0x1b/0x80 [59.219] ? preempt_count_add+0x70/0xa0 [59.219] ? __x64_sys_ioctl+0x88/0xc0 [59.219] __x64_sys_ioctl+0x88/0xc0 [59.219] do_syscall_64+0x38/0x90 [59.219] entry_SYSCALL_64_after_hwframe+0x72/0xdc [59.219] RIP: 0033:0x7f82ffaffe9b [59.219] RSP: 002b:00007f82fd9f8c50 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [59.219] RAX: ffffffffffffffda RBX: 000055b191e37510 RCX: 00007f82ffaffe9b [59.219] RDX: 000055b191e37510 RSI: 00000000c400941b RDI: 0000000000000003 [59.219] RBP: 0000000000000000 R08: 00007fff1575016f R09: 0000000000000000 [59.219] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f82fd9f9640 [59.219] R13: 000000000000006b R14: 00007f82ffa87580 R15: 0000000000000000 [59.219] </TASK> [59.219] INFO: task btrfs:346822 blocked for more than 120 seconds. [59.220] Tainted: G W 6.3.0-rc2-btrfs-next-127+ #1 [59.221] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [59.222] task:btrfs state:D stack:0 pid:346822 ppid:1 flags:0x00004002 [59.222] Call Trace: [59.222] <TASK> [59.222] __schedule+0x392/0xa70 [59.222] schedule+0x5d/0xd0 [59.222] btrfs_scrub_cancel+0x91/0x100 [btrfs] [59.222] ? __pfx_autoremove_wake_function+0x10/0x10 [59.222] btrfs_commit_transaction+0x572/0xeb0 [btrfs] [59.223] ? start_transaction+0xcb/0x610 [btrfs] [59.223] prepare_to_relocate+0x111/0x1a0 [btrfs] [59.223] relocate_block_group+0x57/0x5d0 [btrfs] [59.223] ? btrfs_wait_nocow_writers+0x25/0xb0 [btrfs] [59.223] btrfs_relocate_block_group+0x248/0x3c0 [btrfs] [59.224] ? __pfx_autoremove_wake_function+0x10/0x10 [59.224] btrfs_relocate_chunk+0x3b/0x150 [btrfs] [59.224] btrfs_balance+0x8ff/0x11d0 [btrfs] [59.224] ? __kmem_cache_alloc_node+0x14a/0x410 [59.224] btrfs_ioctl+0x2334/0x32c0 [btrfs] [59.225] ? mod_objcg_state+0xd2/0x360 [59.225] ? refill_obj_stock+0xb0/0x160 [59.225] ? seq_release+0x25/0x30 [59.225] ? __rseq_handle_notify_resume+0x3b5/0x4b0 [59.225] ? percpu_counter_add_batch+0x2e/0xa0 [59.225] ? __x64_sys_ioctl+0x88/0xc0 [59.225] __x64_sys_ioctl+0x88/0xc0 [59.225] do_syscall_64+0x38/0x90 [59.225] entry_SYSCALL_64_after_hwframe+0x72/0xdc [59.225] RIP: 0033:0x7f381a6ffe9b [59.225] RSP: 002b:00007ffd45ecf060 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [59.225] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f381a6ffe9b [59.225] RDX: 00007ffd45ecf150 RSI: 00000000c4009420 RDI: 0000000000000003 [59.225] RBP: 0000000000000003 R08: 0000000000000013 R09: 0000000000000000 [59.225] R10: 00007f381a60c878 R11: 0000000000000246 R12: 00007ffd45ed0423 [59.225] R13: 00007ffd45ecf150 R14: 0000000000000000 R15: 00007ffd45ecf148 [59.225] </TASK> What happens is the following: 1) A scrub is running, so fs_info->scrubs_running is 1; 2) Task A starts block group relocation, and at btrfs_relocate_chunk() it pauses scrub by calling btrfs_scrub_pause(). That increments fs_info->scrub_pause_req from 0 to 1 and waits for the scrub task to pause (for fs_info->scrubs_paused to be == to fs_info->scrubs_running); 3) The scrub task pauses at scrub_pause_off(), waiting for fs_info->scrub_pause_req to decrease to 0; 4) Task A then enters btrfs_relocate_block_group(), and down that call chain we start a transaction and then attempt to commit it; 5) When task A calls btrfs_commit_transaction(), it either will do the commit itself or wait for some other task that already started the commit of the transaction - it doesn't matter which case; 6) The transaction commit enters state TRANS_STATE_COMMIT_START; 7) An error happens during the transaction commit, like -ENOSPC when running delayed refs or delayed items for example; 8) This results in calling transaction.c:cleanup_transaction(), where we call btrfs_scrub_cancel(), incrementing fs_info->scrub_cancel_req from 0 to 1, and blocking this task waiting for fs_info->scrubs_running to decrease to 0; 9) From this point on, both the transaction commit and the scrub task hang forever: 1) The transaction commit is waiting for fs_info->scrubs_running to be decreased to 0; 2) The scrub task is at scrub_pause_off() waiting for fs_info->scrub_pause_req to decrease to 0 - so it can not proceed to stop the scrub and decrement fs_info->scrubs_running from 0 to 1. Therefore resulting in a deadlock. Fix this by having cleanup_transaction(), called if a transaction commit fails, not call btrfs_scrub_cancel() if relocation is in progress, and having btrfs_relocate_block_group() call btrfs_scrub_cancel() instead if the relocation failed and a transaction abort happened. This was triggered with btrfs/061 from fstests. Fixes: 55e3a601c81c ("btrfs: Fix data checksum error cause by replace with io-load.") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-03-28btrfs: scan device in non-exclusive modeAnand Jain
This fixes mkfs/mount/check failures due to race with systemd-udevd scan. During the device scan initiated by systemd-udevd, other user space EXCL operations such as mkfs, mount, or check may get blocked and result in a "Device or resource busy" error. This is because the device scan process opens the device with the EXCL flag in the kernel. Two reports were received: - btrfs/179 test case, where the fsck command failed with the -EBUSY error - LTP pwritev03 test case, where mkfs.vfs failed with the -EBUSY error, when mkfs.vfs tried to overwrite old btrfs filesystem on the device. In both cases, fsck and mkfs (respectively) were racing with a systemd-udevd device scan, and systemd-udevd won, resulting in the -EBUSY error for fsck and mkfs. Reproducing the problem has been difficult because there is a very small window during which these userspace threads can race to acquire the exclusive device open. Even on the system where the problem was observed, the problem occurrences were anywhere between 10 to 400 iterations and chances of reproducing decreases with debug printk()s. However, an exclusive device open is unnecessary for the scan process, as there are no write operations on the device during scan. Furthermore, during the mount process, the superblock is re-read in the below function call chain: btrfs_mount_root btrfs_open_devices open_fs_devices btrfs_open_one_device btrfs_get_bdev_and_sb So, to fix this issue, removes the FMODE_EXCL flag from the scan operation, and add a comment. The case where mkfs may still write to the device and a scan is running, the btrfs signature is not written at that time so scan will not recognize such device. Reported-by: Sherry Yang <sherry.yang@oracle.com> Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/oe-lkp/202303170839.fdf23068-oliver.sang@intel.com CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-03-28btrfs: fix race between quota disable and quota assign ioctlsFilipe Manana
The quota assign ioctl can currently run in parallel with a quota disable ioctl call. The assign ioctl uses the quota root, while the disable ioctl frees that root, and therefore we can have a use-after-free triggered in the assign ioctl, leading to a trace like the following when KASAN is enabled: [672.723][T736] BUG: KASAN: slab-use-after-free in btrfs_search_slot+0x2962/0x2db0 [672.723][T736] Read of size 8 at addr ffff888022ec0208 by task btrfs_search_sl/27736 [672.724][T736] [672.725][T736] CPU: 1 PID: 27736 Comm: btrfs_search_sl Not tainted 6.3.0-rc3 #37 [672.723][T736] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [672.727][T736] Call Trace: [672.728][T736] <TASK> [672.728][T736] dump_stack_lvl+0xd9/0x150 [672.725][T736] print_report+0xc1/0x5e0 [672.720][T736] ? __virt_addr_valid+0x61/0x2e0 [672.727][T736] ? __phys_addr+0xc9/0x150 [672.725][T736] ? btrfs_search_slot+0x2962/0x2db0 [672.722][T736] kasan_report+0xc0/0xf0 [672.729][T736] ? btrfs_search_slot+0x2962/0x2db0 [672.724][T736] btrfs_search_slot+0x2962/0x2db0 [672.723][T736] ? fs_reclaim_acquire+0xba/0x160 [672.722][T736] ? split_leaf+0x13d0/0x13d0 [672.726][T736] ? rcu_is_watching+0x12/0xb0 [672.723][T736] ? kmem_cache_alloc+0x338/0x3c0 [672.722][T736] update_qgroup_status_item+0xf7/0x320 [672.724][T736] ? add_qgroup_rb+0x3d0/0x3d0 [672.739][T736] ? do_raw_spin_lock+0x12d/0x2b0 [672.730][T736] ? spin_bug+0x1d0/0x1d0 [672.737][T736] btrfs_run_qgroups+0x5de/0x840 [672.730][T736] ? btrfs_qgroup_rescan_worker+0xa70/0xa70 [672.738][T736] ? __del_qgroup_relation+0x4ba/0xe00 [672.738][T736] btrfs_ioctl+0x3d58/0x5d80 [672.735][T736] ? tomoyo_path_number_perm+0x16a/0x550 [672.737][T736] ? tomoyo_execute_permission+0x4a0/0x4a0 [672.731][T736] ? btrfs_ioctl_get_supported_features+0x50/0x50 [672.737][T736] ? __sanitizer_cov_trace_switch+0x54/0x90 [672.734][T736] ? do_vfs_ioctl+0x132/0x1660 [672.730][T736] ? vfs_fileattr_set+0xc40/0xc40 [672.730][T736] ? _raw_spin_unlock_irq+0x2e/0x50 [672.732][T736] ? sigprocmask+0xf2/0x340 [672.737][T736] ? __fget_files+0x26a/0x480 [672.732][T736] ? bpf_lsm_file_ioctl+0x9/0x10 [672.738][T736] ? btrfs_ioctl_get_supported_features+0x50/0x50 [672.736][T736] __x64_sys_ioctl+0x198/0x210 [672.736][T736] do_syscall_64+0x39/0xb0 [672.731][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.739][T736] RIP: 0033:0x4556ad [672.742][T736] </TASK> [672.743][T736] [672.748][T736] Allocated by task 27677: [672.743][T736] kasan_save_stack+0x22/0x40 [672.741][T736] kasan_set_track+0x25/0x30 [672.741][T736] __kasan_kmalloc+0xa4/0xb0 [672.749][T736] btrfs_alloc_root+0x48/0x90 [672.746][T736] btrfs_create_tree+0x146/0xa20 [672.744][T736] btrfs_quota_enable+0x461/0x1d20 [672.743][T736] btrfs_ioctl+0x4a1c/0x5d80 [672.747][T736] __x64_sys_ioctl+0x198/0x210 [672.749][T736] do_syscall_64+0x39/0xb0 [672.744][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.756][T736] [672.757][T736] Freed by task 27677: [672.759][T736] kasan_save_stack+0x22/0x40 [672.759][T736] kasan_set_track+0x25/0x30 [672.756][T736] kasan_save_free_info+0x2e/0x50 [672.751][T736] ____kasan_slab_free+0x162/0x1c0 [672.758][T736] slab_free_freelist_hook+0x89/0x1c0 [672.752][T736] __kmem_cache_free+0xaf/0x2e0 [672.752][T736] btrfs_put_root+0x1ff/0x2b0 [672.759][T736] btrfs_quota_disable+0x80a/0xbc0 [672.752][T736] btrfs_ioctl+0x3e5f/0x5d80 [672.756][T736] __x64_sys_ioctl+0x198/0x210 [672.753][T736] do_syscall_64+0x39/0xb0 [672.765][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.769][T736] [672.768][T736] The buggy address belongs to the object at ffff888022ec0000 [672.768][T736] which belongs to the cache kmalloc-4k of size 4096 [672.769][T736] The buggy address is located 520 bytes inside of [672.769][T736] freed 4096-byte region [ffff888022ec0000, ffff888022ec1000) [672.760][T736] [672.764][T736] The buggy address belongs to the physical page: [672.761][T736] page:ffffea00008bb000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x22ec0 [672.766][T736] head:ffffea00008bb000 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [672.779][T736] flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) [672.770][T736] raw: 00fff00000010200 ffff888012842140 ffffea000054ba00 dead000000000002 [672.770][T736] raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000 [672.771][T736] page dumped because: kasan: bad access detected [672.778][T736] page_owner tracks the page as allocated [672.777][T736] page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd2040(__GFP_IO|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 88 [672.779][T736] get_page_from_freelist+0x119c/0x2d50 [672.779][T736] __alloc_pages+0x1cb/0x4a0 [672.776][T736] alloc_pages+0x1aa/0x270 [672.773][T736] allocate_slab+0x260/0x390 [672.771][T736] ___slab_alloc+0xa9a/0x13e0 [672.778][T736] __slab_alloc.constprop.0+0x56/0xb0 [672.771][T736] __kmem_cache_alloc_node+0x136/0x320 [672.789][T736] __kmalloc+0x4e/0x1a0 [672.783][T736] tomoyo_realpath_from_path+0xc3/0x600 [672.781][T736] tomoyo_path_perm+0x22f/0x420 [672.782][T736] tomoyo_path_unlink+0x92/0xd0 [672.780][T736] security_path_unlink+0xdb/0x150 [672.788][T736] do_unlinkat+0x377/0x680 [672.788][T736] __x64_sys_unlink+0xca/0x110 [672.789][T736] do_syscall_64+0x39/0xb0 [672.783][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.784][T736] page last free stack trace: [672.787][T736] free_pcp_prepare+0x4e5/0x920 [672.787][T736] free_unref_page+0x1d/0x4e0 [672.784][T736] __unfreeze_partials+0x17c/0x1a0 [672.797][T736] qlist_free_all+0x6a/0x180 [672.796][T736] kasan_quarantine_reduce+0x189/0x1d0 [672.797][T736] __kasan_slab_alloc+0x64/0x90 [672.793][T736] kmem_cache_alloc+0x17c/0x3c0 [672.799][T736] getname_flags.part.0+0x50/0x4e0 [672.799][T736] getname_flags+0x9e/0xe0 [672.792][T736] vfs_fstatat+0x77/0xb0 [672.791][T736] __do_sys_newlstat+0x84/0x100 [672.798][T736] do_syscall_64+0x39/0xb0 [672.796][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.790][T736] [672.791][T736] Memory state around the buggy address: [672.799][T736] ffff888022ec0100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.805][T736] ffff888022ec0180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.802][T736] >ffff888022ec0200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.809][T736] ^ [672.809][T736] ffff888022ec0280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.809][T736] ffff888022ec0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fix this by having the qgroup assign ioctl take the qgroup ioctl mutex before calling btrfs_run_qgroups(), which is what all qgroup ioctls should call. Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAFcO6XN3VD8ogmHwqRk4kbiwtpUSNySu2VAxN8waEPciCHJvMA@mail.gmail.com/ CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-03-27loop: LOOP_CONFIGURE: send uevents for partitionsAlyssa Ross
LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall. When using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for each partition found on the loop device after the second ioctl(), but when using LOOP_CONFIGURE, no such uevent was being sent. In the old setup, uevents are disabled for LOOP_SET_FD, but not for LOOP_SET_STATUS64. This makes sense, as it prevents uevents being sent for a partially configured device during LOOP_SET_FD - they're only sent at the end of LOOP_SET_STATUS64. But for LOOP_CONFIGURE, uevents were disabled for the entire operation, so that final notification was never issued. To fix this, reduce the critical section to exclude the loop_reread_partitions() call, which causes the uevents to be issued, to after uevents are re-enabled, matching the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination. I noticed this because Busybox's losetup program recently changed from using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke my setup, for which I want a notification from the kernel any time a new partition becomes available. Signed-off-by: Alyssa Ross <hi@alyssa.is> [hch: reduced the critical section] Signed-off-by: Christoph Hellwig <hch@lst.de> Fixes: 3448914e8cc5 ("loop: Add LOOP_CONFIGURE ioctl") Link: https://lore.kernel.org/r/20230320125430.55367-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-27Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "RISC-V: - Fix VM hang in case of timer delta being zero ARM: - MMU fixes: - Read the MMU notifier seq before dropping the mmap lock to guard against reading a potentially stale VMA - Disable interrupts when walking user page tables to protect against the page table being freed - Read the MTE permissions for the VMA within the mmap lock critical section, avoiding the use of a potentally stale VMA pointer - vPMU fixes: - Return the sum of the current perf event value and PMC snapshot for reads from userspace - Don't save the value of guest writes to PMCR_EL0.{C,P}, which could otherwise lead to userspace erroneously resetting the vPMU during VM save/restore" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: riscv/kvm: Fix VM hang in case of timer delta being zero. KVM: arm64: Check for kvm_vma_mte_allowed in the critical section KVM: arm64: Disable interrupts while walking userspace PTs KVM: arm64: Retry fault if vma_lookup() results become invalid KVM: arm64: PMU: Don't save PMCR_EL0.{C,P} for the vCPU KVM: arm64: PMU: Fix GET_ONE_REG for vPMC regs to return the current value
2023-03-27ACPI: bus: Rework system-level device notification handlingRafael J. Wysocki
For ACPI drivers that provide a ->notify() callback and set ACPI_DRIVER_ALL_NOTIFY_EVENTS in their flags, that callback can be invoked while either the ->add() or the ->remove() callback is running without any synchronization at the bus type level which is counter to the common-sense expectation that notification handling should only be enabled when the driver is actually bound to the device. As a result, if the driver is not careful enough, it's ->notify() callback may crash when it is invoked too early or too late [1]. This issue has been amplified by commit d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") that made acpi_bus_notify() check for the presence of the driver and its ->notify() callback directly instead of using an extra driver pointer that was only set and cleared by the bus type code, but it was present before that commit although it was harder to reproduce then. It can be addressed by using the observation that acpi_device_install_notify_handler() can be modified to install the handler for all types of events when ACPI_DRIVER_ALL_NOTIFY_EVENTS is set in the driver flags, in which case acpi_bus_notify() will not need to invoke the driver's ->notify() callback any more and that callback will only be invoked after acpi_device_install_notify_handler() has run and before acpi_device_remove_notify_handler() runs, which implies the correct ordering with respect to the other ACPI driver callbacks. Modify the code accordingly and while at it, drop two redundant local variables from acpi_bus_notify() and turn its description comment into a proper kerneldoc one. Fixes: d6fb6ee1820c ("ACPI: bus: Drop driver member of struct acpi_device") Link: https://lore.kernel.org/linux-acpi/9f6cba7a8a57e5a687c934e8e406e28c.squirrel@mail.panix.com # [1] Reported-by: Pierre Asselin <pa@panix.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Pierre Asselin <pa@panix.com>
2023-03-27Merge tag 'platform-drivers-x86-v6.3-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Intel tpmi/vsec fixes - think-lmi fixes - two other small fixes / hw-id additions * tag 'platform-drivers-x86-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/surface: aggregator: Add missing fwnode_handle_put() platform/x86: think-lmi: Add possible_values for ThinkStation platform/x86: think-lmi: only display possible_values if available platform/x86: think-lmi: use correct possible_values delimiters platform/x86: think-lmi: add missing type attribute platform/x86 (gigabyte-wmi): Add support for A320M-S2H V2 platform/x86/intel: tpmi: Revise the comment of intel_vsec_add_aux platform/x86/intel: tpmi: Fix double free in tpmi_create_device() platform/x86/intel: vsec: Fix a memory leak in intel_vsec_add_aux
2023-03-27Merge tag 'mtd/fixes-for-6.3-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: "Raw NAND controller driver fixes: - meson: - Invalidate cache on polling ECC bit - Initialize struct with zeroes - nandsim: Artificially prevent sequential page reads ECC engine driver fixes: - mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is used Binging fixes: - jedec,spi-nor: Document CPOL/CPHA support" * tag 'mtd/fixes-for-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: meson: invalidate cache on polling ECC bit mtd: rawnand: nandsim: Artificially prevent sequential page reads dt-bindings: mtd: jedec,spi-nor: Document CPOL/CPHA support mtd: nand: mxic-ecc: Fix mxic_ecc_data_xfer_wait_for_completion() when irq is used mtd: rawnand: meson: initialize struct with zeroes
2023-03-27s390/ptrace: fix PTRACE_GET_LAST_BREAK error handlingHeiko Carstens
Return -EFAULT if put_user() for the PTRACE_GET_LAST_BREAK request fails, instead of silently ignoring it. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27s390: reintroduce expoline dependence to scriptsJiri Slaby (SUSE)
Expolines depend on scripts/basic/fixdep. And build of expolines can now race with the fixdep build: make[1]: *** Deleting file 'arch/s390/lib/expoline/expoline.o' /bin/sh: line 1: scripts/basic/fixdep: Permission denied make[1]: *** [../scripts/Makefile.build:385: arch/s390/lib/expoline/expoline.o] Error 126 make: *** [../arch/s390/Makefile:166: expoline_prepare] Error 2 The dependence was removed in the below Fixes: commit. So reintroduce the dependence on scripts. Fixes: a0b0987a7811 ("s390/nospec: remove unneeded header includes") Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: stable@vger.kernel.org Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230316112809.7903-1-jirislaby@kernel.org Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27s390/vfio-ap: fix memory leak in vfio_ap device driverTony Krowiak
The device release callback function invoked to release the matrix device uses the dev_get_drvdata(device *dev) function to retrieve the pointer to the vfio_matrix_dev object in order to free its storage. The problem is, this object is not stored as drvdata with the device; since the kfree function will accept a NULL pointer, the memory for the vfio_matrix_dev object is never freed. Since the device being released is contained within the vfio_matrix_dev object, the container_of macro will be used to retrieve its pointer. Fixes: 1fde573413b5 ("s390: vfio-ap: base implementation of VFIO AP device driver") Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Link: https://lore.kernel.org/r/20230320150447.34557-1-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27s390/uaccess: add missing earlyclobber annotations to __clear_user()Heiko Carstens
Add missing earlyclobber annotation to size, to, and tmp2 operands of the __clear_user() inline assembly since they are modified or written to before the last usage of all input operands. This can lead to incorrect register allocation for the inline assembly. Fixes: 6c2a9e6df604 ("[S390] Use alternative user-copy operations for new hardware.") Reported-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/all/20230321122514.1743889-3-mark.rutland@arm.com/ Cc: stable@vger.kernel.org Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-03-27KVM: nVMX: Do not report error code when synthesizing VM-Exit from Real ModeSean Christopherson
Don't report an error code to L1 when synthesizing a nested VM-Exit and L2 is in Real Mode. Per Intel's SDM, regarding the error code valid bit: This bit is always 0 if the VM exit occurred while the logical processor was in real-address mode (CR0.PE=0). The bug was introduced by a recent fix for AMD's Paged Real Mode, which moved the error code suppression from the common "queue exception" path to the "inject exception" path, but missed VMX's "synthesize VM-Exit" path. Fixes: b97f07458373 ("KVM: x86: determine if an exception has an error code only when injecting it.") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230322143300.2209476-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-27KVM: x86: Clear "has_error_code", not "error_code", for RM exception injectionSean Christopherson
When injecting an exception into a vCPU in Real Mode, suppress the error code by clearing the flag that tracks whether the error code is valid, not by clearing the error code itself. The "typo" was introduced by recent fix for SVM's funky Paged Real Mode. Opportunistically hoist the logic above the tracepoint so that the trace is coherent with respect to what is actually injected (this was also the behavior prior to the buggy commit). Fixes: b97f07458373 ("KVM: x86: determine if an exception has an error code only when injecting it.") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230322143300.2209476-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-27KVM: x86: Suppress pending MMIO write exits if emulator detects exceptionSean Christopherson
Clear vcpu->mmio_needed when injecting an exception from the emulator to squash a (legitimate) warning about vcpu->mmio_needed being true at the start of KVM_RUN without a callback being registered to complete the userspace MMIO exit. Suppressing the MMIO write exit is inarguably wrong from an architectural perspective, but it is the least awful hack-a-fix due to shortcomings in KVM's uAPI, not to mention that KVM already suppresses MMIO writes in this scenario. Outside of REP string instructions, KVM doesn't provide a way to resume an instruction at the exact point where it was "interrupted" if said instruction partially completed before encountering an MMIO access. For MMIO reads, KVM immediately exits to userspace upon detecting MMIO as userspace provides the to-be-read value in a buffer, and so KVM can safely (more or less) restart the instruction from the beginning. When the emulator re-encounters the MMIO read, KVM will service the MMIO by getting the value from the buffer instead of exiting to userspace, i.e. KVM won't put the vCPU into an infinite loop. On an emulated MMIO write, KVM finishes the instruction before exiting to userspace, as exiting immediately would ultimately hang the vCPU due to the aforementioned shortcoming of KVM not being able to resume emulation in the middle of an instruction. For the vast majority of _emulated_ instructions, deferring the userspace exit doesn't cause problems as very few x86 instructions (again ignoring string operations) generate multiple writes. But for instructions that generate multiple writes, e.g. PUSHA (multiple pushes onto the stack), deferring the exit effectively results in only the final write triggering an exit to userspace. KVM does support multiple MMIO "fragments", but only for page splits; if an instruction performs multiple distinct MMIO writes, the number of fragments gets reset when the next MMIO write comes along and any previous MMIO writes are dropped. Circling back to the warning, if a deferred MMIO write coincides with an exception, e.g. in this case a #SS due to PUSHA underflowing the stack after queueing a write to an MMIO page on a previous push, KVM injects the exceptions and leaves the deferred MMIO pending without registering a callback, thus triggering the splat. Sweep the problem under the proverbial rug as dropping MMIO writes is not unique to the exception scenario (see above), i.e. instructions like PUSHA are fundamentally broken with respect to MMIO, and have been since KVM's inception. Reported-by: zhangjianguo <zhangjianguo18@huawei.com> Reported-by: syzbot+760a73552f47a8cd0fd9@syzkaller.appspotmail.com Reported-by: syzbot+8accb43ddc6bd1f5713a@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230322141220.2206241-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-27KVM: x86/ioapic: Resample the pending state of an IRQ when unmaskingDmytro Maluka
KVM irqfd based emulation of level-triggered interrupts doesn't work quite correctly in some cases, particularly in the case of interrupts that are handled in a Linux guest as oneshot interrupts (IRQF_ONESHOT). Such an interrupt is acked to the device in its threaded irq handler, i.e. later than it is acked to the interrupt controller (EOI at the end of hardirq), not earlier. Linux keeps such interrupt masked until its threaded handler finishes, to prevent the EOI from re-asserting an unacknowledged interrupt. However, with KVM + vfio (or whatever is listening on the resamplefd) we always notify resamplefd at the EOI, so vfio prematurely unmasks the host physical IRQ, thus a new physical interrupt is fired in the host. This extra interrupt in the host is not a problem per se. The problem is that it is unconditionally queued for injection into the guest, so the guest sees an extra bogus interrupt. [*] There are observed at least 2 user-visible issues caused by those extra erroneous interrupts for a oneshot irq in the guest: 1. System suspend aborted due to a pending wakeup interrupt from ChromeOS EC (drivers/platform/chrome/cros_ec.c). 2. Annoying "invalid report id data" errors from ELAN0000 touchpad (drivers/input/mouse/elan_i2c_core.c), flooding the guest dmesg every time the touchpad is touched. The core issue here is that by the time when the guest unmasks the IRQ, the physical IRQ line is no longer asserted (since the guest has acked the interrupt to the device in the meantime), yet we unconditionally inject the interrupt queued into the guest by the previous resampling. So to fix the issue, we need a way to detect that the IRQ is no longer pending, and cancel the queued interrupt in this case. With IOAPIC we are not able to probe the physical IRQ line state directly (at least not if the underlying physical interrupt controller is an IOAPIC too), so in this patch we use irqfd resampler for that. Namely, instead of injecting the queued interrupt, we just notify the resampler that this interrupt is done. If the IRQ line is actually already deasserted, we are done. If it is still asserted, a new interrupt will be shortly triggered through irqfd and injected into the guest. In the case if there is no irqfd resampler registered for this IRQ, we cannot fix the issue, so we keep the existing behavior: immediately unconditionally inject the queued interrupt. This patch fixes the issue for x86 IOAPIC only. In the long run, we can fix it for other irqchips and other architectures too, possibly taking advantage of reading the physical state of the IRQ line, which is possible with some other irqchips (e.g. with arm64 GIC, maybe even with the legacy x86 PIC). [*] In this description we assume that the interrupt is a physical host interrupt forwarded to the guest e.g. by vfio. Potentially the same issue may occur also with a purely virtual interrupt from an emulated device, e.g. if the guest handles this interrupt, again, as a oneshot interrupt. Signed-off-by: Dmytro Maluka <dmy@semihalf.com> Link: https://lore.kernel.org/kvm/31420943-8c5f-125c-a5ee-d2fde2700083@semihalf.com/ Link: https://lore.kernel.org/lkml/87o7wrug0w.wl-maz@kernel.org/ Message-Id: <20230322204344.50138-3-dmy@semihalf.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-27KVM: irqfd: Make resampler_list an RCU listDmytro Maluka
It is useful to be able to do read-only traversal of the list of all the registered irqfd resamplers without locking the resampler_lock mutex. In particular, we are going to traverse it to search for a resampler registered for the given irq of an irqchip, and that will be done with an irqchip spinlock (ioapic->lock) held, so it is undesirable to lock a mutex in this context. So turn this list into an RCU list. For protecting the read side, reuse kvm->irq_srcu which is already used for protecting a number of irq related things (kvm->irq_routing, irqfd->resampler->list, kvm->irq_ack_notifier_list, kvm->arch.mask_notifier_list). Signed-off-by: Dmytro Maluka <dmy@semihalf.com> Message-Id: <20230322204344.50138-2-dmy@semihalf.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-27KVM: SVM: Flush Hyper-V TLB when requiredJeremi Piotrowski
The Hyper-V "EnlightenedNptTlb" enlightenment is always enabled when KVM is running on top of Hyper-V and Hyper-V exposes support for it (which is always). On AMD CPUs this enlightenment results in ASID invalidations not flushing TLB entries derived from the NPT. To force the underlying (L0) hypervisor to rebuild its shadow page tables, an explicit hypercall is needed. The original KVM implementation of Hyper-V's "EnlightenedNptTlb" on SVM only added remote TLB flush hooks. This worked out fine for a while, as sufficient remote TLB flushes where being issued in KVM to mask the problem. Since v5.17, changes in the TDP code reduced the number of flushes and the out-of-sync TLB prevents guests from booting successfully. Split svm_flush_tlb_current() into separate callbacks for the 3 cases (guest/all/current), and issue the required Hyper-V hypercall when a Hyper-V TLB flush is needed. The most important case where the TLB flush was missing is when loading a new PGD, which is followed by what is now svm_flush_tlb_current(). Cc: stable@vger.kernel.org # v5.17+ Fixes: 1e0c7d40758b ("KVM: SVM: hyper-v: Remote TLB flush for SVM") Link: https://lore.kernel.org/lkml/43980946-7bbf-dcef-7e40-af904c456250@linux.microsoft.com/ Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20230324145233.4585-1-jpiotrowski@linux.microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-27Merge tag 'kvm-riscv-fixes-6.3-1' of https://github.com/kvm-riscv/linux into ↵Paolo Bonzini
HEAD KVM/riscv fixes for 6.3, take #1 - Fix VM hang in case of timer delta being zero
2023-03-27Merge tag 'kvmarm-fixes-6.3-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.3, part #2 Fixes for a rather interesting set of bugs relating to the MMU: - Read the MMU notifier seq before dropping the mmap lock to guard against reading a potentially stale VMA - Disable interrupts when walking user page tables to protect against the page table being freed - Read the MTE permissions for the VMA within the mmap lock critical section, avoiding the use of a potentally stale VMA pointer Additionally, some fixes targeting the vPMU: - Return the sum of the current perf event value and PMC snapshot for reads from userspace - Don't save the value of guest writes to PMCR_EL0.{C,P}, which could otherwise lead to userspace erroneously resetting the vPMU during VM save/restore
2023-03-27platform/x86: gigabyte-wmi: add support for B650 AORUS ELITE AXThomas Weißschuh
This has been reported as working. Suggested-by: got3nks <got3nks@users.noreply.github.com> Link: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/15#issuecomment-1483942966 Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230327-gigabyte-wmi-b650-elite-ax-v1-1-d4d645c21d0b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-03-27can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_writeIvan Orlov
Syzkaller reported the following issue: ===================================================== BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline] BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600 aio_rw_done fs/aio.c:1520 [inline] aio_write+0x899/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc+0x11d/0x3b0 mm/slab_common.c:981 kmalloc_array include/linux/slab.h:636 [inline] bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930 bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] sock_write_iter+0x495/0x5e0 net/socket.c:1108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 ===================================================== We can follow the call chain and find that 'bcm_tx_setup' function calls 'memcpy_from_msg' to copy some content to the newly allocated frame of 'op->frames'. After that the 'len' field of copied structure being compared with some constant value (64 or 8). However, if 'memcpy_from_msg' returns an error, we will compare some uninitialized memory. This triggers 'uninit-value' issue. This patch will add 'memcpy_from_msg' possible errors processing to avoid uninit-value issue. Tested via syzkaller Reported-by: syzbot+c9bfd85eca611ebf5db1@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=47f897f8ad958bbde5790ebf389b5e7e0a345089 Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Fixes: 6f3b911d5f29b ("can: bcm: add support for CAN FD frames") Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230314120445.12407-1-ivan.orlov0322@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-03-27platform/x86/intel/pmc: Alder Lake PCH slp_s0_residency fixRajvi Jingar
For platforms with Alder Lake PCH (Alder Lake S and Raptor Lake S) the slp_s0_residency attribute has been reporting the wrong value. Unlike other platforms, ADL PCH does not have a counter for the time that the SLP_S0 signal was asserted. Instead, firmware uses the aggregate of the Low Power Mode (LPM) substate counters as the S0ix value. Since the LPM counters run at a different frequency, this lead to misreporting of the S0ix time. Add a check for Alder Lake PCH and adjust the frequency accordingly when display slp_s0_residency. Fixes: bbab31101f44 ("platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver") Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230320212029.3154407-1-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-03-27drm/i915/perf: Drop wakeref on GuC RC errorChris Wilson
If we fail to adjust the GuC run-control on opening the perf stream, make sure we unwind the wakeref just taken. v2: Retain old goto label names (Ashutosh) v3: Drop bitfield boolean Fixes: 01e742746785 ("drm/i915/guc: Support OA when Wa_16011777198 is enabled") Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-2-umesh.nerlige.ramappa@intel.com (cherry picked from commit 2810ac6c753d17ee2572ffb57fe2382a786a080a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915/dpt: Treat the DPT BO as a framebufferVille Syrjälä
Currently i915_gem_object_is_framebuffer() doesn't treat the BO containing the framebuffer's DPT as a framebuffer itself. This means eg. that the shrinker can evict the DPT BO while leaving the actual FB BO bound, when the DPT is allocated from regular shmem. That causes an immediate oops during hibernate as we try to rewrite the PTEs inside the already evicted DPT obj. TODO: presumably this might also be the reason for the DPT related display faults under heavy memory pressure, but I'm still not sure how that would happen as the object should be pinned by intel_dpt_pin() while in active use by the display engine... Cc: stable@vger.kernel.org Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Imre Deak <imre.deak@intel.com> Fixes: 0dc987b699ce ("drm/i915/display: Add smem fallback allocation for dpt") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320090522.9909-2-ville.syrjala@linux.intel.com Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> (cherry picked from commit 779cb5ba64ec7df80675a956c9022929514f517a) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915/gem: Flush lmem contents after constructionChris Wilson
i915_gem_object_create_lmem_from_data() lacks the flush of the data written to lmem to ensure the object is marked as dirty and the writes flushed to the backing store. Once created, we can immediately release the obj->mm.mapping caching of the vmap. Fixes: 7acbbc7cf485 ("drm/i915/guc: put all guc objects in lmem when available") Cc: Matthew Auld <matthew.auld@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.16+ Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316165918.13074-1-nirmoy.das@intel.com (cherry picked from commit e2ee10474ce766686e7a7496585cdfaf79e3a1bf) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915/tc: Fix the ICL PHY ownership check in TC-cold stateImre Deak
The commit renaming icl_tc_phy_is_in_safe_mode() to icl_tc_phy_take_ownership() didn't flip the function's return value accordingly, fix this up. This didn't cause an actual problem besides state check errors, since the function is only used during HW readout. Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: f53979d68a77 ("drm/i915/display/tc: Rename safe_mode functions ownership") Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316131724.359612-4-imre.deak@intel.com (cherry picked from commit f2c7959dda614d9b7c6a41510492de39d31705ec) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Disable DC states for all commitsVille Syrjälä
Keeping DC states enabled is incompatible with the _noarm()/_arm() split we use for writing pipe/plane registers. When DC5 and PSR are enabled, all pipe/plane registers effectively become self-arming on account of DC5 exit arming the update, and PSR exit latching it. What probably saves us most of the time is that (with PIPE_MISC[21]=0) all pipe register writes themselves trigger PSR exit, and then we don't re-enter PSR until the idle frame count has elapsed. So it may be that the PSR exit happens already before we've updated the state too much. Also the PSR1 panel (at least on this KBL) seems to discard the first frame we trasmit, presumably still scanning out from its internal framebuffer at that point. So only the second frame we transmit is actually visible. But I suppose that could also be panel specific behaviour. I haven't checked out how other PSR panels behave, nor did I bother to check what the eDP spec has to say about this. And since this really is all about DC states, let's switch from the MODESET domain to the DC_OFF domain. Functionally they are 100% identical. We should probably remove the MODESET domain... And for good measure let's toss in an assert to the place where we do the _noarm() register writes to make sure DC states are in fact off. v2: Just use intel_display_power_is_enabled() (Imre) Cc: <stable@vger.kernel.org> #v5.17+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Fixes: f8a005eb8972 ("drm/i915: Optimize icl+ universal plane programming") Fixes: 890b6ec4a522 ("drm/i915: Split skl+ plane update into noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320183532.17727-1-ville.syrjala@linux.intel.com (cherry picked from commit 41b4c7fe72b6105a4b49395eea9aa40cef94288d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Workaround ICL CSC_MODE sticky armingVille Syrjälä
Unlike SKL/GLK the ICL CSC unit suffers from a new issue where CSC_MODE arming is sticky. That is, once armed it remains armed causing the CSC coeff/offset registers to become effectively self-arming. CSC coeff/offset registers writes no longer disarm the CSC, but fortunately register read still do. So we can use that to disarm the CSC unit once the registers for the current frame have been latched. This avoid s the self-arming behaviour from persisting into the next frame's .color_commit_noarm() call. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-5-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 92736f1b452bbb8a66bdb5b1d263ad00e04dd3b8) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Add a .color_post_update() hookVille Syrjälä
We're going to need stuff after the color management register latching has happened. Add a corresponding hook. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-4-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 3962ca4e080a525fc9eae87aa6b2286f1fae351d) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Move CSC load back into .color_commit_arm() when PSR is enabled on ↵Ville Syrjälä
skl/glk SKL/GLK CSC unit suffers from a nasty issue where a CSC coeff/offset register read or write between DC5 exit and PSR exit will undo the CSC arming performed by DMC, and then during PSR exit the hardware will latch zeroes into the active CSC registers. This causes any plane going through the CSC to output all black. We can sidestep the issue by making sure the PSR exit has already actually happened before we touch the CSC coeff/offset registers. Easiest way to guarantee that is to just move the CSC programming back into the .color_commir_arm() as we force a PSR exit (and crucially wait for it to actually happen) prior to touching the arming registers. When PSR (and thus also DC states) are disabled we don't have anything to worry about, so we can keep using the more optional _noarm() hook for writing the CSC registers. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8283 Fixes: d13dde449580 ("drm/i915: Split pipe+output CSC programming to noarm+arm pair") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-3-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 80a892a4c2428b65366721599fc5fe50eaed35fd) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915: Split icl_color_commit_noarm() from skl_color_commit_noarm()Ville Syrjälä
We're going to want different behavior for skl/glk vs. icl in .color_commit_noarm(), so split the hook into two. Arguably we already had slightly different behaviour since csc_enable/gamma_enable are never set on icl+, so the old code was perhaps a bit confusing as well. Cc: <stable@vger.kernel.org> #v5.19+ Cc: Manasi Navare <navaremanasi@google.com> Cc: Drew Davenport <ddavenport@chromium.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230320095438.17328-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit f161eb01f50ab31f2084975b43bce54b7b671e17) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27drm/i915/pmu: Use functions common with sysfs to read actual freqAshutosh Dixit
Expose intel_rps_read_actual_frequency_fw to read the actual freq without taking forcewake for use by PMU. The code is refactored to use a common set of functions across sysfs and PMU. Using common functions with sysfs in PMU solves the issues of missing support for MTL and missing support for older generations (prior to Gen6). It also future proofs the PMU where sometimes code has been updated for sysfs and PMU has been missed. v2: Remove runtime_pm_if_in_use from read_actual_frequency_fw (Tvrtko) v3: (Tvrtko) - Remove goto in __read_cagf - Unexport intel_rps_get_cagf and intel_rps_read_punit_req Fixes: 22009b6dad66 ("drm/i915/mtl: Modify CAGF functions for MTL") Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8280 Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230316004800.2539753-1-ashutosh.dixit@intel.com (cherry picked from commit 44df42e66139b5fac8db49ee354be279210f9816) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-03-27net: stmmac: don't reject VLANs when IFF_PROMISC is setVladimir Oltean
The blamed commit has introduced the following tests to dwmac4_add_hw_vlan_rx_fltr(), called from stmmac_vlan_rx_add_vid(): if (hw->promisc) { netdev_err(dev, "Adding VLAN in promisc mode not supported\n"); return -EPERM; } "VLAN promiscuous" mode is keyed in this driver to IFF_PROMISC, and so, vlan_vid_add() and vlan_vid_del() calls cannot take place in IFF_PROMISC mode. I have the following 2 arguments that this restriction is.... hm, how shall I put it nicely... unproductive :) First, take the case of a Linux bridge. If the kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y, then this bridge shall have a VLAN database. The bridge shall try to call vlan_add_vid() on its bridge ports for each VLAN in the VLAN table. It will do this irrespectively of whether that port is *currently* VLAN-aware or not. So it will do this even when the bridge was created with vlan_filtering 0. But the Linux bridge, in VLAN-unaware mode, configures its ports in promiscuous (IFF_PROMISC) mode, so that they accept packets with any MAC DA (a switch must do this in order to forward those packets which are not directly targeted to its MAC address). As a result, the stmmac driver does not work as a bridge port, when the kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y. $ ip link add br0 type bridge && ip link set br0 up $ ip link set eth0 master br0 && ip link set eth0 up [ 2333.943296] br0: port 1(eth0) entered blocking state [ 2333.943381] br0: port 1(eth0) entered disabled state [ 2333.943782] device eth0 entered promiscuous mode [ 2333.944080] 4033c000.ethernet eth0: Adding VLAN in promisc mode not supported [ 2333.976509] 4033c000.ethernet eth0: failed to initialize vlan filtering on this port RTNETLINK answers: Operation not permitted Secondly, take the case of stmmac as DSA master. Some switch tagging protocols are based on 802.1Q VLANs (tag_sja1105.c), and as such, tag_8021q.c uses vlan_vid_add() to work with VLAN-filtering DSA masters. But also, when a DSA port becomes promiscuous (for example when it joins a bridge), the DSA framework also makes the DSA master promiscuous. Moreover, for every VLAN that a DSA switch sends to the CPU, DSA also programs a VLAN filter on the DSA master, because if the the DSA switch uses a tail tag, then the hardware frame parser of the DSA master will see VLAN as VLAN, and might filter them out, for being unknown. Due to the above 2 reasons, my belief is that the stmmac driver does not get to choose to not accept vlan_vid_add() calls while IFF_PROMISC is enabled, because the 2 are completely independent and there are code paths in the network stack which directly lead to this situation occurring, without the user's direct input. In fact, my belief is that "VLAN promiscuous" mode should have never been keyed on IFF_PROMISC in the first place, but rather, on the NETIF_F_HW_VLAN_CTAG_FILTER feature flag which can be toggled by the user through ethtool -k, when present in netdev->hw_features. In the stmmac driver, NETIF_F_HW_VLAN_CTAG_FILTER is only present in "features", making this feature "on [fixed]". I have this belief because I am unaware of any definition of promiscuity which implies having an effect on anything other than MAC DA (therefore not VLAN). However, I seem to be rather alone in having this opinion, looking back at the disagreements from this discussion: https://lore.kernel.org/netdev/20201110153958.ci5ekor3o2ekg3ky@ipetronik.com/ In any case, to remove the vlan_vid_add() dependency on !IFF_PROMISC, one would need to remove the check and see what fails. I guess the test was there because of the way in which dwmac4_vlan_promisc_enable() is implemented. For context, the dwmac4 supports Perfect Filtering for a limited number of VLANs - dwmac4_get_num_vlan(), priv->hw->num_vlan, with a fallback on Hash Filtering - priv->dma_cap.vlhash - see stmmac_vlan_update(), also visible in cat /sys/kernel/debug/stmmaceth/eth0/dma_cap | grep 'VLAN Hash Filtering'. The perfect filtering is based on MAC_VLAN_Tag_Filter/MAC_VLAN_Tag_Data registers, accessed in the driver through dwmac4_write_vlan_filter(). The hash filtering is based on the MAC_VLAN_Hash_Table register, named GMAC_VLAN_HASH_TABLE in the driver and accessed by dwmac4_update_vlan_hash(). The control bit for enabling hash filtering is GMAC_VLAN_VTHM (MAC_VLAN_Tag_Ctrl bit VTHM: VLAN Tag Hash Table Match Enable). Now, the description of dwmac4_vlan_promisc_enable() is that it iterates through the driver's cache of perfect filter entries (hw->vlan_filter[i], added by dwmac4_add_hw_vlan_rx_fltr()), and evicts them from hardware by unsetting their GMAC_VLAN_TAG_DATA_VEN (MAC_VLAN_Tag_Data bit VEN - VLAN Tag Enable) bit. Then it unsets the GMAC_VLAN_VTHM bit, which disables hash matching. This leaves the MAC, according to table "VLAN Match Status" from the documentation, to always enter these data paths: VID |VLAN Perfect Filter |VTHM Bit |VLAN Hash Filter |Final VLAN Match |Match Result | |Match Result |Status -------|--------------------|---------|-----------------|---------------- VID!=0 |Fail |0 |don't care |Pass So, dwmac4_vlan_promisc_enable() does its job, but by unsetting GMAC_VLAN_VTHM, it conflicts with the other code path which controls this bit: dwmac4_update_vlan_hash(), called through stmmac_update_vlan_hash() from stmmac_vlan_rx_add_vid() and from stmmac_vlan_rx_kill_vid(). This is, I guess, why dwmac4_add_hw_vlan_rx_fltr() is not allowed to run after dwmac4_vlan_promisc_enable() has unset GMAC_VLAN_VTHM: because if it did, then dwmac4_update_vlan_hash() would set GMAC_VLAN_VTHM again, breaking the "VLAN promiscuity". It turns out that dwmac4_vlan_promisc_enable() is way too complicated for what needs to be done. The MAC_Packet_Filter register also has the VTFE bit (VLAN Tag Filter Enable), which simply controls whether VLAN tagged packets which don't match the filtering tables (either perfect or hash) are dropped or not. At the moment, this driver unconditionally sets GMAC_PACKET_FILTER_VTFE if NETIF_F_HW_VLAN_CTAG_FILTER was detected through the priv->dma_cap.vlhash capability bits of the device, in stmmac_dvr_probe(). I would suggest deleting the unnecessarily complex logic from dwmac4_vlan_promisc_enable(), and simply unsetting GMAC_PACKET_FILTER_VTFE when becoming IFF_PROMISC, which has the same effect of allowing packets with any VLAN tags, but has the additional benefit of being able to run concurrently with stmmac_vlan_rx_add_vid() and stmmac_vlan_rx_kill_vid(). As much as I believe that the VTFE bit should have been exclusively controlled by NETIF_F_HW_VLAN_CTAG_FILTER through ethtool, and not by IFF_PROMISC, changing that is not a punctual fix to the problem, and it would probably break the VFFQ feature added by the later commit e0f9956a3862 ("net: stmmac: Add option for VLAN filter fail queue enable"). From the commit description, VFFQ needs IFF_PROMISC=on and VTFE=off in order to work (and this change respects that). But if VTFE was changed to be controlled through ethtool -k, then a user-visible change would have been introduced in Intel's scripts (a need to run "ethtool -k eth0 rx-vlan-filter off" which did not exist before). The patch was tested with this set of commands: ip link set eth0 up ip link add link eth0 name eth0.100 type vlan id 100 ip addr add 192.168.100.2/24 dev eth0.100 && ip link set eth0.100 up ip link set eth0 promisc on ip link add link eth0 name eth0.101 type vlan id 101 ip addr add 192.168.101.2/24 dev eth0.101 && ip link set eth0.101 up ip link set eth0 promisc off ping -c 5 192.168.100.1 ping -c 5 192.168.101.1 ip link set eth0 promisc on ping -c 5 192.168.100.1 ping -c 5 192.168.101.1 ip link del eth0.100 ip link del eth0.101 # Wait for VLAN-tagged pings from the other end... # Check with "tcpdump -i eth0 -e -n -p" and we should see them ip link set eth0 promisc off # Wait for VLAN-tagged pings from the other end... # Check with "tcpdump -i eth0 -e -n -p" and we shouldn't see them # anymore, but remove the "-p" argument from tcpdump and they're there. Fixes: c89f44ff10fd ("net: stmmac: Add support for VLAN promiscuous mode") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27can: j1939: prevent deadlock by moving j1939_sk_errqueue()Oleksij Rempel
This commit addresses a deadlock situation that can occur in certain scenarios, such as when running data TP/ETP transfer and subscribing to the error queue while receiving a net down event. The deadlock involves locks in the following order: 3 j1939_session_list_lock -> active_session_list_lock j1939_session_activate ... j1939_sk_queue_activate_next -> sk_session_queue_lock ... j1939_xtp_rx_eoma_one 2 j1939_sk_queue_drop_all -> sk_session_queue_lock ... j1939_sk_netdev_event_netdown -> j1939_socks_lock j1939_netdev_notify 1 j1939_sk_errqueue -> j1939_socks_lock __j1939_session_cancel -> active_session_list_lock j1939_tp_rxtimer CPU0 CPU1 ---- ---- lock(&priv->active_session_list_lock); lock(&jsk->sk_session_queue_lock); lock(&priv->active_session_list_lock); lock(&priv->j1939_socks_lock); The solution implemented in this commit is to move the j1939_sk_errqueue() call out of the active_session_list_lock context, thus preventing the deadlock situation. Reported-by: syzbot+ee1cd780f69483a8616b@syzkaller.appspotmail.com Fixes: 5b9272e93f2e ("can: j1939: extend UAPI to notify about RX status") Co-developed-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20230324130141.2132787-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-03-27net: dsa: b53: mmap: add phy opsÁlvaro Fernández Rojas
Implement phy_read16() and phy_write16() ops for B53 MMAP to avoid accessing B53_PORT_MII_PAGE registers which hangs the device. This access should be done through the MDIO Mux bus controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: phy: micrel: correct KSZ9131RNX EEE capabilities and advertisementOleksij Rempel
The KSZ9131RNX incorrectly shows EEE capabilities in its registers. Although the "EEE control and capability 1" (Register 3.20) is set to 0, indicating no EEE support, the "EEE advertisement 1" (Register 7.60) is set to 0x6, advertising EEE support for 1000BaseT/Full and 100BaseT/Full. This inconsistency causes PHYlib to assume there is no EEE support, preventing control over EEE advertisement, which is enabled by default. This patch resolves the issue by utilizing the ksz9477_get_features() function to correctly set the EEE capabilities for the KSZ9131RNX. This adjustment allows proper control over EEE advertisement and ensures accurate representation of the device's capabilities. Fixes: 8b68710a3121 ("net: phy: start using genphy_c45_ethtool_get/set_eee()") Reported-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27vsock/loopback: use only sk_buff_head.lock to protect the packet queueStefano Garzarella
pkt_list_lock was used before commit 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") to protect the packet queue. After that commit we switched to sk_buff and we are using sk_buff_head.lock in almost every place to protect the packet queue except in vsock_loopback_work() when we call skb_queue_splice_init(). As reported by syzbot, this caused unlocked concurrent access to the packet queue between vsock_loopback_work() and vsock_loopback_cancel_pkt() since it is not holding pkt_list_lock. With the introduction of sk_buff_head, pkt_list_lock is redundant and can cause confusion, so let's remove it and use sk_buff_head.lock everywhere to protect the packet queue access. Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Cc: bobby.eshleman@bytedance.com Reported-and-tested-by: syzbot+befff0a9536049e7902e@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Reviewed-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27Merge branch 'constify-sfp-phy-nodes'David S. Miller
Russell King says: ==================== Constify a few sfp/phy fwnodes This series constifies a bunch of fwnode_handle pointers that are only used to refer to but not modify the contents of the fwnode structures. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: phy: constify fwnode_get_phy_node() fwnode argumentRussell King (Oracle)
fwnode_get_phy_node() does not motify the fwnode structure, so make the argument const, Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sfp: constify sfp-bus internal fwnode usesRussell King (Oracle)
Constify sfp-bus internal fwnode uses, since we do not modify the fwnode structures. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sfp: make sfp_bus_find_fwnode() take a const fwnodeRussell King (Oracle)
sfp_bus_find_fwnode() does not write to the fwnode, so let's make it const. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net/net_failover: fix txq exceeding warningFaicker Mo
The failover txq is inited as 16 queues. when a packet is transmitted from the failover device firstly, the failover device will select the queue which is returned from the primary device if the primary device is UP and running. If the primary device txq is bigger than the default 16, it can lead to the following warning: eth0 selects TX queue 18, but real number of TX queues is 16 The warning backtrace is: [ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1 [ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014 [ 32.147730] Call Trace: [ 32.147971] <TASK> [ 32.148183] dump_stack_lvl+0x48/0x70 [ 32.148514] dump_stack+0x10/0x20 [ 32.148820] netdev_core_pick_tx+0xb1/0xe0 [ 32.149180] __dev_queue_xmit+0x529/0xcf0 [ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0 [ 32.149967] ip_finish_output2+0x278/0x560 [ 32.150327] __ip_finish_output+0x1fe/0x2f0 [ 32.150690] ip_finish_output+0x2a/0xd0 [ 32.151032] ip_output+0x7a/0x110 [ 32.151337] ? __pfx_ip_finish_output+0x10/0x10 [ 32.151733] ip_local_out+0x5e/0x70 [ 32.152054] ip_send_skb+0x19/0x50 [ 32.152366] udp_send_skb.isra.0+0x163/0x3a0 [ 32.152736] udp_sendmsg+0xba8/0xec0 [ 32.153060] ? __folio_memcg_unlock+0x25/0x60 [ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 32.153854] ? sock_has_perm+0x85/0xa0 [ 32.154190] inet_sendmsg+0x6d/0x80 [ 32.154508] ? inet_sendmsg+0x6d/0x80 [ 32.154838] sock_sendmsg+0x62/0x70 [ 32.155152] ____sys_sendmsg+0x134/0x290 [ 32.155499] ___sys_sendmsg+0x81/0xc0 [ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0 [ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0 [ 32.156649] ? get_random_u16+0x69/0xf0 [ 32.156989] ? __fget_light+0xcf/0x110 [ 32.157326] __sys_sendmmsg+0xc4/0x210 [ 32.157657] ? __sys_connect+0xb7/0xe0 [ 32.157995] ? __audit_syscall_entry+0xce/0x140 [ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0 [ 32.158820] __x64_sys_sendmmsg+0x24/0x30 [ 32.159171] do_syscall_64+0x38/0x90 [ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix that by reducing txq number as the non-existent primary-dev does. Fixes: cfc80d9a1163 ("net: Introduce net_failover driver") Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27regulator: Handle deferred clkChristophe JAILLET
devm_clk_get() can return -EPROBE_DEFER. So it is better to return the error code from devm_clk_get(), instead of a hard coded -ENOENT. This gives more opportunities to successfully probe the driver. Fixes: 8959e5324485 ("regulator: fixed: add possibility to enable by clock") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/18459fae3d017a66313699c7c8456b28158b2dd0.1679819354.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-26Linux 6.3-rc4v6.3-rc4Linus Torvalds
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 02:43:15 +0000