| Age | Commit message (Collapse) | Author |
|---|
|
Syzbot reported a bug as following:
=====================================================
BUG: KMSAN: uninit-value in arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline]
BUG: KMSAN: uninit-value in arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline]
BUG: KMSAN: uninit-value in atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline]
BUG: KMSAN: uninit-value in __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956
arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline]
arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline]
atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline]
__ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956
ip6_finish_skb include/net/ipv6.h:1122 [inline]
ip6_push_pending_frames+0x10e/0x550 net/ipv6/ip6_output.c:1987
rawv6_push_pending_frames+0xb12/0xb90 net/ipv6/raw.c:579
rawv6_sendmsg+0x297e/0x2e60 net/ipv6/raw.c:922
inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530
__sys_sendmsg net/socket.c:2559 [inline]
__do_sys_sendmsg net/socket.c:2568 [inline]
__se_sys_sendmsg net/socket.c:2566 [inline]
__x64_sys_sendmsg+0x367/0x540 net/socket.c:2566
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook mm/slab.h:766 [inline]
slab_alloc_node mm/slub.c:3452 [inline]
__kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491
__do_kmalloc_node mm/slab_common.c:967 [inline]
__kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988
kmalloc_reserve net/core/skbuff.c:492 [inline]
__alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565
alloc_skb include/linux/skbuff.h:1270 [inline]
__ip6_append_data+0x51c1/0x6bb0 net/ipv6/ip6_output.c:1684
ip6_append_data+0x411/0x580 net/ipv6/ip6_output.c:1854
rawv6_sendmsg+0x2882/0x2e60 net/ipv6/raw.c:915
inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530
__sys_sendmsg net/socket.c:2559 [inline]
__do_sys_sendmsg net/socket.c:2568 [inline]
__se_sys_sendmsg net/socket.c:2566 [inline]
__x64_sys_sendmsg+0x367/0x540 net/socket.c:2566
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
It is because icmp6hdr does not in skb linear region under the scenario
of SOCK_RAW socket. Access icmp6_hdr(skb)->icmp6_type directly will
trigger the uninit variable access bug.
Use a local variable icmp6_type to carry the correct value in different
scenarios.
Fixes: 14878f75abd5 ("[IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2]")
Reported-by: syzbot+8257f4dcef79de670baf@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=3d605ec1d0a7f2a269a1a6936ac7f2b85975ee9c
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On the remote side, when QRTR socket is removed, af_qrtr will call
qrtr_port_remove() which broadcasts the DEL_CLIENT packet to all neighbours
including local NS. NS upon receiving the DEL_CLIENT packet, will remove
the lookups associated with the node:port and broadcasts the DEL_SERVER
packet.
But on the host side, due to the arrival of the DEL_CLIENT packet, the NS
would've already deleted the server belonging to that port. So when the
remote's NS again broadcasts the DEL_SERVER for that port, it throws below
error message on the host:
"failed while handling packet from 2:-2"
So fix this error by not broadcasting the DEL_SERVER packet when the
DEL_CLIENT packet gets processed."
Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ram Kumar Dharuman <quic_ramd@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
Transceiver type : Ethernet: 1000BASE-LX
...
BR, Nominal : 2600MBd
Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.
https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60
Reported-by: chowtom <chowtom@gmail.com>
Tested-by: chowtom <chowtom@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When considering whether to mark one context as stopped and another as
started we need to look at whether the previous and new _contexts_ are
different and not just requests. Otherwise the software tracked context
start time was incorrectly updated to the most recent lite-restore time-
stamp, which was in some cases resulting in active time going backward,
until the context switch (typically the heartbeat pulse) would synchronise
with the hardware tracked context runtime. Easiest use case to observe
this behaviour was with a full screen clients with close to 100% engine
load.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: bb6287cb1886 ("drm/i915: Track context current active time")
Cc: <stable@vger.kernel.org> # v5.19+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320151423.1708436-1-tvrtko.ursulin@linux.intel.com
[tursulin: Fix spelling in commit msg.]
(cherry picked from commit b3e70051879c665acdd3a1ab50d0ed58d6a8001f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Userspace can guess the id value and try to race oa_config object creation
with config remove, resulting in a use-after-free if we dereference the
object after unlocking the metrics_lock. For that reason, unlocking the
metrics_lock must be done after we are done dereferencing the object.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Fixes: f89823c21224 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328093627.5067-1-lm0963hack@gmail.com
[tursulin: Manually added stable tag.]
(cherry picked from commit 49f6f6483b652108bcb73accd0204a464b922395)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
For obvious reasons, we use compressed bpp instead of pipe bpp for
DSC DP SST case. Lets be consistent and use compressed bpp instead of
pipe bpp, also in DP MST DSC case.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Fixes: d51f25eb479a ("drm/i915: Add DSC support to MST path")
Link: https://patchwork.freedesktop.org/patch/msgid/20230327064217.24033-1-stanislav.lisovskiy@intel.com
(cherry picked from commit ea1deabc6f11575eb3375b454457eaa3c9837abc)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
In the rare case where we do a full GT reset after starting the HuC
load and before it completes (which basically boils down to i915 hanging
during init), we need to cancel the delayed load fence, as it will be
re-initialized in the post-reset recovery.
Fixes: 27536e03271d ("drm/i915/huc: track delayed HuC load with a fence")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313205556.1174503-1-daniele.ceraolospurio@intel.com
(cherry picked from commit cdf7911f7dbcb37228409a63bf75630776c45a15)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Sparse complains with:
drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1066:21: sparse:
expected restricted vm_fault_t [assigned] [usertype] ret
drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1066:21: sparse: got int
Fixes: 516198d317d8 ("drm/i915: audit bo->resource usage v3")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130101230.25347-1-matthew.auld@intel.com
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Christian König <ckoenig.leichtzumerken@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
(cherry picked from commit fde789e8339c60c8c58e5a71fa819fcfe52d839e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Make sure all bo->base.pages entries are either NULL or pointing to a
valid page before calling drm_gem_shmem_put_pages().
Reported-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: <stable@vger.kernel.org>
Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210521093811.1018992-1-boris.brezillon@collabora.com
|
|
When smb1 mount fails, KASAN detect slab-out-of-bounds in
init_smb2_rsp_hdr like the following one.
For smb1 negotiate(56bytes) , init_smb2_rsp_hdr() for smb2 is called.
The issue occurs while handling smb1 negotiate as smb2 server operations.
Add smb server operations for smb1 (get_cmd_val, init_rsp_hdr,
allocate_rsp_buf, check_user_session) to handle smb1 negotiate so that
smb2 server operation does not handle it.
[ 411.400423] CIFS: VFS: Use of the less secure dialect vers=1.0 is
not recommended unless required for access to very old servers
[ 411.400452] CIFS: Attempting to mount \\192.168.45.139\homes
[ 411.479312] ksmbd: init_smb2_rsp_hdr : 492
[ 411.479323] ==================================================================
[ 411.479327] BUG: KASAN: slab-out-of-bounds in
init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd]
[ 411.479369] Read of size 16 at addr ffff888488ed0734 by task kworker/14:1/199
[ 411.479379] CPU: 14 PID: 199 Comm: kworker/14:1 Tainted: G
OE 6.1.21 #3
[ 411.479386] Hardware name: ASUSTeK COMPUTER INC. Z10PA-D8
Series/Z10PA-D8 Series, BIOS 3801 08/23/2019
[ 411.479390] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
[ 411.479425] Call Trace:
[ 411.479428] <TASK>
[ 411.479432] dump_stack_lvl+0x49/0x63
[ 411.479444] print_report+0x171/0x4a8
[ 411.479452] ? kasan_complete_mode_report_info+0x3c/0x200
[ 411.479463] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd]
[ 411.479497] kasan_report+0xb4/0x130
[ 411.479503] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd]
[ 411.479537] kasan_check_range+0x149/0x1e0
[ 411.479543] memcpy+0x24/0x70
[ 411.479550] init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd]
[ 411.479585] handle_ksmbd_work+0x109/0x760 [ksmbd]
[ 411.479616] ? _raw_spin_unlock_irqrestore+0x50/0x50
[ 411.479624] ? smb3_encrypt_resp+0x340/0x340 [ksmbd]
[ 411.479656] process_one_work+0x49c/0x790
[ 411.479667] worker_thread+0x2b1/0x6e0
[ 411.479674] ? process_one_work+0x790/0x790
[ 411.479680] kthread+0x177/0x1b0
[ 411.479686] ? kthread_complete_and_exit+0x30/0x30
[ 411.479692] ret_from_fork+0x22/0x30
[ 411.479702] </TASK>
Fixes: 39b291b86b59 ("ksmbd: return unsupported error on smb1 mount")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When smb2_lock request is canceled by smb2_cancel or smb2_close(),
ksmbd is missing deleting async_request_entry async_requests list.
Because calling init_smb2_rsp_hdr() in smb2_lock() mark ->synchronous
as true and then it will not be deleted in
ksmbd_conn_try_dequeue_request(). This patch add release_async_work() to
release the ones allocated for async work.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The validity of sock should be checked before assignment to avoid incorrect
values. Commit 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref
while calling getpeername()") introduced this change which may lead to
inconsistent values of tcp_sw_conn->sendpage and conn->datadgst_en.
Fix the issue by moving the position of the assignment.
Fixes: 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()")
Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com>
Link: https://lore.kernel.org/r/20230329071739.2175268-1-zhongjinghua@huaweicloud.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There is a memory leak reported by kmemleak:
unreferenced object 0xffffc900003f0000 (size 12288):
comm "modprobe", pid 19117, jiffies 4299751452 (age 42490.264s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000629261a8>] __vmalloc_node_range+0xe56/0x1110
[<0000000001906886>] __vmalloc_node+0xbd/0x150
[<000000005bb4dc34>] vmalloc+0x25/0x30
[<00000000a2dc1194>] qla2x00_create_host+0x7a0/0xe30 [qla2xxx]
[<0000000062b14b47>] qla2x00_probe_one+0x2eb8/0xd160 [qla2xxx]
[<00000000641ccc04>] local_pci_probe+0xeb/0x1a0
The root cause is traced to an error-handling path in qla2x00_probe_one()
when the adapter "base_vha" initialize failed. The fab_scan_rp "scan.l" is
used to record the port information and it is allocated in
qla2x00_create_host(). However, it is not released in the error handling
path "probe_failed".
Fix this by freeing the memory of "scan.l" when an error occurs in the
adapter initialization process.
Fixes: a4239945b8ad ("scsi: qla2xxx: Add switch command to simplify fabric discovery")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20230325110004.363898-1-lizetao1@huawei.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver is exiting from the fault watchdog thread if it sees the 0xF002
(Soft reset in progress) fault code.
If the driver initiates the soft reset, then the driver restarts the
watchdog at the end of the soft reset completion. However, if the soft
reset is initiated by the firmware asynchronously, then the driver will
never restart the watchdog and never re-initialize the controller after the
asynchronous soft reset completion.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20230331122317.11391-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This reverts commit 7dafc3e007918384c8693ff8d70381b5c1e9c247.
This patch introduced a regression [1] where hba->pwr_info is used before
being initialized, which could create issues in ufshcd_scale_gear(). Revert
it until a better solution is found.
[1] https://lore.kernel.org/all/CAGaU9a_PMZhqv+YJ0r3w-hJMsR922oxW6Kg59vw+oen-NZ6Otw@mail.gmail.com
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20230329205426.46393-1-athierry@redhat.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- scan block devices in non-exclusive mode to avoid temporary mkfs
failures
- fix race between quota disable and quota assign ioctls
- fix deadlock when aborting transaction during relocation with scrub
- ignore fiemap path cache when there are multiple paths for a node
* tag 'for-6.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ignore fiemap path cache when there are multiple paths for a node
btrfs: fix deadlock when aborting transaction during relocation with scrub
btrfs: scan device in non-exclusive mode
btrfs: fix race between quota disable and quota assign ioctls
|
|
This reverts commit a837e5161cff, which broke probing of the venus
driver, at least on the SC7180 SoC HP X2 Chromebook:
qcom-venus aa00000.video-codec: Adding to iommu group 11
qcom-venus aa00000.video-codec: non legacy binding
qcom-venus aa00000.video-codec: failed to reset venus core
qcom-venus: probe of aa00000.video-codec failed with error -110
Matthias Kaehlcke also reported that the same change caused a regression
in SC7180 and sc7280, that prevents AOSS from entering sleep mode during
system suspend. So let's revert this commit for now to fix both issues.
Fixes: a837e5161cff ("venus: firmware: Correct non-pix start and end addresses")
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three small changes for 6.3-rc5 semi-related to driver core
stuff:
- documentation update where we move the security_bugs file to a more
relevant location.
- mdt/spi-nor debugfs memory leak fix that's been floating around for
a long time and acked by the maintainer
- cacheinfo bugfix for a regression in 6.3-rc1
All have been in linux-next with no reported problems"
* tag 'driver-core-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
cacheinfo: Fix LLC is not exported through sysfs
Documentation/security-bugs: move from admin-guide/ to process/
mtd: spi-nor: fix memory leak when using debugfs_lookup()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y)
- Fix oops when a PF_IO_WORKER thread tries to core dump
- Don't try to reconfigure VAS when it's disabled
Thanks to Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, and
Russell Currey.
* tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/vas: Ignore VAS update for DLPAR if copy/paste is not enabled
powerpc: Don't try to copy PPR for task with NULL pt_regs
powerpc/64s: Fix __pte_needs_flush() false positive warning
|
|
This patch fixes a corner case where the asoc out stream count may change
after wait_for_sndbuf.
When the main thread in the client starts a connection, if its out stream
count is set to N while the in stream count in the server is set to N - 2,
another thread in the client keeps sending the msgs with stream number
N - 1, and waits for sndbuf before processing INIT_ACK.
However, after processing INIT_ACK, the out stream count in the client is
shrunk to N - 2, the same to the in stream count in the server. The crash
occurs when the thread waiting for sndbuf is awake and sends the msg in a
non-existing stream(N - 1), the call trace is as below:
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
Call Trace:
<TASK>
sctp_cmd_send_msg net/sctp/sm_sideeffect.c:1114 [inline]
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1777 [inline]
sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline]
sctp_do_sm+0x197d/0x5310 net/sctp/sm_sideeffect.c:1170
sctp_primitive_SEND+0x9f/0xc0 net/sctp/primitive.c:163
sctp_sendmsg_to_asoc+0x10eb/0x1a30 net/sctp/socket.c:1868
sctp_sendmsg+0x8d4/0x1d90 net/sctp/socket.c:2026
inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825
sock_sendmsg_nosec net/socket.c:722 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:745
The fix is to add an unlikely check for the send stream number after the
thread wakes up from the wait_for_sndbuf.
Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Reported-by: syzbot+47c24ca20a2fa01f082e@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Based on further tests, it seems that the QDMA shaper is not able to
perform shaping close to the MAC link rate without throughput loss.
This cannot be compensated by increasing the shaping rate, so it seems
to be an internal limit.
Fix the remaining throughput regression by detecting that condition and
limiting shaping to ports with lower link speed.
This patch intentionally ignores link speed gain from TRGMII, because
even on such links, shaping to 1000 Mbit/s incurs some throughput
degradation.
Fixes: f63959c7eec3 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Tested-By: Frank Wunderlich <frank-w@public-files.de>
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The force watchdog event bit is not cleared during SW reset in the
mv88e6393x switch. This is a different behavior compared to mv886390 which
clears the force WD event bit as advertised. This causes a force WD event
to be handled over and over again as the SW reset following the event never
clears the force WD event bit.
Explicitly clear the watchdog event register to 0 in irq_action when
handling an event to prevent the switch from sending continuous interrupts.
Marvell aren't aware of any other stuck bits apart from the force WD
bit.
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family"
Signed-off-by: Gustav Ekelund <gustaek@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 0db3dc73f7a3 ("[NETPOLL]: tx lock deadlock fix") narrowed
down the region under netif_tx_trylock() inside netpoll_send_skb().
(At that point in time netif_tx_trylock() would lock all queues of
the device.) Taking the tx lock was problematic because driver's
cleanup method may take the same lock. So the change made us hold
the xmit lock only around xmit, and expected the driver to take
care of locking within ->ndo_poll_controller().
Unfortunately this only works if netpoll isn't itself called with
the xmit lock already held. Netpoll code is careful and uses
trylock(). The drivers, however, may be using plain lock().
Printing while holding the xmit lock is going to result in rare
deadlocks.
Luckily we record the xmit lock owners, so we can scan all the queues,
the same way we scan NAPI owners. If any of the xmit locks is held
by the local CPU we better not attempt any polling.
It would be nice if we could narrow down the check to only the NAPIs
and the queue we're trying to use. I don't see a way to do that now.
Reported-by: Roman Gushchin <roman.gushchin@linux.dev>
Fixes: 0db3dc73f7a3 ("[NETPOLL]: tx lock deadlock fix")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When removing provided buffers, io_buffer structs are not being disposed
of, leading to a memory leak. They can't be freed individually, because
they are allocated in page-sized groups. They need to be added to some
free list instead, such as io_buffers_cache. All callers already hold
the lock protecting it, apart from when destroying buffers, so had to
extend the lock there.
Fixes: cc3cec8367cb ("io_uring: speedup provided buffer handling")
Signed-off-by: Wojciech Lukowicz <wlukowicz01@gmail.com>
Link: https://lore.kernel.org/r/20230401195039.404909-2-wlukowicz01@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When a request to remove buffers is submitted, and the given number to be
removed is larger than available in the specified buffer group, the
resulting CQE result will be the number of removed buffers + 1, which is
1 more than it should be.
Previously, the head was part of the list and it got removed after the
loop, so the increment was needed. Now, the head is not an element of
the list, so the increment shouldn't be there anymore.
Fixes: dbc7d452e7cf ("io_uring: manage provided buffers strictly ordered")
Signed-off-by: Wojciech Lukowicz <wlukowicz01@gmail.com>
Link: https://lore.kernel.org/r/20230401195039.404909-2-wlukowicz01@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull cifs client fixes from Steve French:
"Four cifs/smb3 client (reconnect and DFS related) fixes, including two
for stable:
- DFS oops fix
- DFS reconnect recursion fix
- An SMB1 parallel reconnect fix
- Trivial dead code removal in smb2_reconnect"
* tag '6.3-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: get rid of dead check in smb2_reconnect()
cifs: prevent infinite recursion in CIFSGetDFSRefer()
cifs: avoid races in parallel reconnects in smb1
cifs: fix DFS traversal oops without CONFIG_CIFS_DFS_UPCALL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- fixes to ALPS and Focaltech PS/2 drivers dealing with the breakage of
switching to -funsigned-char
- quirks to i8042 to better handle Lifebook A574/H and TUXEDO devices
- a quirk to Goodix touchscreen driver to handle Yoga Book X90F
- a fix for incorrectly merged patch to xpad game controller driver
* tag 'input-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add TUXEDO devices to i8042 quirk tables for partial fix
Input: alps - fix compatibility with -funsigned-char
Input: focaltech - use explicitly signed char type
Input: xpad - fix incorrectly applied patch for MAP_PROFILE_BUTTON
Input: goodix - add Lenovo Yoga Book X90F to nine_bytes_report DMI table
Input: i8042 - add quirk for Fujitsu Lifebook A574/H
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some pin control fixes for the v6.3 series.
The most notable and urgent one is probably the AMD fix which affects
AMD laptops, found by the Chromium people.
Summary:
- Fix up the Kconfig options for MediaTek MT7981
- Fix the irq domain name in the AT91-PIO4 driver
- Fix some alternative muxing modes in the Ocelot driver
- Allocate the GPIO numbers dynamically in the STM32 driver
- Disable and mask interrupts on resume in the AMD driver
- Fix a typo in the Qualcomm SM8550 pin control device tree bindings"
* tag 'pinctrl-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: qcom,sm8550-lpass-lpi: allow input-enabled and bias-bus-hold
pinctrl: amd: Disable and mask interrupts on resume
pinctrl: stm32: use dynamic allocation of GPIO base
pinctrl: ocelot: Fix alt mode for ocelot
pinctrl: at91-pio4: fix domain name assignment
pinctrl: mediatek: fix naming inconsistency
pinctrl: mediatek: add missing options to PINCTRL_MT7981
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix linux-headers debian package
- Fix a merge_config.sh error due to a misspelled variable
- Fix modversion for 32-bit build machines
* tag 'kbuild-fixes-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Fix processing of CRCs on 32-bit build machines
scripts: merge_config: Fix typo in variable name.
kbuild: deb-pkg: set version for linux-headers paths
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Maintainer update for S390 IOMMU driver
- A fix for the set_platform_dma_ops() call-back in the Exynos
IOMMU driver
- Intel VT-d fixes from Lu Baolu:
- Fix a lockdep splat
- Fix a supplement of the specification
- Fix a warning in perfmon code
* tag 'iommu-fixes-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix an IOMMU perfmon warning when CPU hotplug
iommu/vt-d: Allow zero SAGAW if second-stage not supported
iommu/vt-d: Remove unnecessary locking in intel_irq_remapping_alloc()
iommu/exynos: Fix set_platform_dma_ops() callback
MAINTAINERS: Update s390-iommu driver maintainer information
|
|
When a DRM driver turns on or off the screen with the audio
capability, it notifies the ELD to HD-audio HDMI codec driver via
component ops. HDMI codec driver, in turn, attaches or detaches the
PCM stream for the given port on the fly.
The problem is that, since the recent code change, the HDMI driver
always treats the PCM stream assignment dynamically; this ended up the
confusion of the PCM device appearance. e.g. when a screen goes once
off and on again, it may appear on a different PCM device before the
screen-off. Although the application should treat such a change, it
doesn't seem working gracefully with the current pipewire (maybe
PulseAudio, too).
As a workaround, this patch changes the HDMI codec driver behavior
slightly to be more consistent. Now it remembers the previous PCM
slot for the given port and try to assign to it. That is, if a port
is re-enabled, the driver tries to use the same PCM slot that was
assigned to that port previously. If it conflicts, a new slot is
searched and used like before, instead.
Note that multiple monitor connections are the only typical case where
the PCM slot preservation is effective. As long as only a single
monitor is connected, the behavior isn't changed, and the first PCM
slot is still assigned always.
Fixes: ef6f5494faf6 ("ALSA: hda/hdmi: Use only dynamic PCM device allocation")
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217259
Link: https://lore.kernel.org/r/20230331142217.19791-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
syzbot was able to trigger a panic [1] in icmp_glue_bits(), or
more exactly in skb_copy_and_csum_bits()
There is no repro yet, but I think the issue is that syzbot
manages to lower device mtu to a small value, fooling __icmp_send()
__icmp_send() must make sure there is enough room for the
packet to include at least the headers.
We might in the future refactor skb_copy_and_csum_bits() and its
callers to no longer crash when something bad happens.
[1]
kernel BUG at net/core/skbuff.c:3343 !
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 15766 Comm: syz-executor.0 Not tainted 6.3.0-rc4-syzkaller-00039-gffe78bbd5121 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:skb_copy_and_csum_bits+0x798/0x860 net/core/skbuff.c:3343
Code: f0 c1 c8 08 41 89 c6 e9 73 ff ff ff e8 61 48 d4 f9 e9 41 fd ff ff 48 8b 7c 24 48 e8 52 48 d4 f9 e9 c3 fc ff ff e8 c8 27 84 f9 <0f> 0b 48 89 44 24 28 e8 3c 48 d4 f9 48 8b 44 24 28 e9 9d fb ff ff
RSP: 0018:ffffc90000007620 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000001e8 RCX: 0000000000000100
RDX: ffff8880276f6280 RSI: ffffffff87fdd138 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000
R10: 00000000000001e8 R11: 0000000000000001 R12: 000000000000003c
R13: 0000000000000000 R14: ffff888028244868 R15: 0000000000000b0e
FS: 00007fbc81f1c700(0000) GS:ffff88802ca00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2df43000 CR3: 00000000744db000 CR4: 0000000000150ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
icmp_glue_bits+0x7b/0x210 net/ipv4/icmp.c:353
__ip_append_data+0x1d1b/0x39f0 net/ipv4/ip_output.c:1161
ip_append_data net/ipv4/ip_output.c:1343 [inline]
ip_append_data+0x115/0x1a0 net/ipv4/ip_output.c:1322
icmp_push_reply+0xa8/0x440 net/ipv4/icmp.c:370
__icmp_send+0xb80/0x1430 net/ipv4/icmp.c:765
ipv4_send_dest_unreach net/ipv4/route.c:1239 [inline]
ipv4_link_failure+0x5a9/0x9e0 net/ipv4/route.c:1246
dst_link_failure include/net/dst.h:423 [inline]
arp_error_report+0xcb/0x1c0 net/ipv4/arp.c:296
neigh_invalidate+0x20d/0x560 net/core/neighbour.c:1079
neigh_timer_handler+0xc77/0xff0 net/core/neighbour.c:1166
call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700
expire_timers+0x29b/0x4b0 kernel/time/timer.c:1751
__run_timers kernel/time/timer.c:2022 [inline]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+d373d60fddbdc915e666@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230330174502.1915328-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit c5b959eeb7f9e40673b97c08c71cbfff5f5923f2.
Reverted change is required after commit 3948b05950fd ("net: introduce
a config option to tweak MAX_SKB_FRAGS") which does not exist
in this tree, yet. It's only present in -next trees at the time
of writing.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/20230331214444.GA1426512@dev-arch.thelio-3990X/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This allows us to advertise more modes especially on HDR displays.
Fixes using 4K@60 modes on my TV and main display both using a HDMI to DP
adapter. Also fixes similar issues for users running into this.
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330223938.4025569-1-kherbst@redhat.com
|
|
The runtime suspend/resume functions are only referenced from the
dev_pm_ops, but they use the old SET_RUNTIME_PM_OPS() helper that
requires a __maybe_unused annotation to avoid a warning:
drivers/media/i2c/imx290.c:1082:12: error: unused function 'imx290_runtime_resume' [-Werror,-Wunused-function]
static int imx290_runtime_resume(struct device *dev)
^
drivers/media/i2c/imx290.c:1090:12: error: unused function 'imx290_runtime_suspend' [-Werror,-Wunused-function]
static int imx290_runtime_suspend(struct device *dev)
^
Convert this to the new RUNTIME_PM_OPS() helper that so this is not
required. To improve this further, also use the pm_ptr() helper that
lets the dev_pm_ops get dropped entirely when CONFIG_PM is disabled.
A related mistake happened in the of_match_ptr() macro here, which like
SET_RUNTIME_PM_OPS() requires the match table to be marked as
__maybe_unused, though I could not reproduce building this without
CONFIG_OF. Remove the of_match_ptr() here as there is no point in
dropping the match table in configurations without CONFIG_OF.
Fixes: 02852c01f654 ("media: i2c: imx290: Initialize runtime PM before subdev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For ops with "trivial" replies, nfsd4_encode_operation will shortcut
most of the encoding work and skip to just marshalling up the status.
One of the things it skips is calling op_release. This could cause a
memory leak in the layoutget codepath if there is an error at an
inopportune time.
Have the compound processing engine always call op_release, even when
op_func sets an error in op->status. With this change, we also need
nfsd4_block_get_device_info_scsi to set the gd_device pointer to NULL
on error to avoid a double free.
Reported-by: Zhi Li <yieli@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2181403
Fixes: 34b1744c91cc ("nfsd4: define ->op_release for compound ops")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
OPDESC() simply indexes into nfsd4_ops[] by the op's operation
number, without range checking that value. It assumes callers are
careful to avoid calling it with an out-of-bounds opnum value.
nfsd4_decode_compound() is not so careful, and can invoke OPDESC()
with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end
of nfsd4_ops[].
Reported-by: Jeff Layton <jlayton@kernel.org>
Fixes: f4f9ef4a1b0a ("nfsd4: opdesc will be useful outside nfs4proc.c")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull NFS client fixes from Anna Schumaker:
- Fix shutdown of NFS TCP client sockets
- Fix hangs when recovering open state after a server reboot
* tag 'nfs-for-6.3-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: fix shutdown of NFS TCP client socket
NFSv4: Fix hangs when recovering open state after a server reboot
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Fix a regression in ideapad-laptop which caused the touchpad to stop
working after a suspend/resume on some models
- One other small fix and three hw-id additions
* tag 'platform-drivers-x86-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ideapad-laptop: Stop sending KEY_TOUCHPAD_TOGGLE
platform/x86: asus-nb-wmi: Add quirk_asus_tablet_mode to other ROG Flow X13 models
platform/x86: gigabyte-wmi: add support for X570S AORUS ELITE
platform/x86: gigabyte-wmi: add support for B650 AORUS ELITE AX
platform/x86/intel/pmc: Alder Lake PCH slp_s0_residency fix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- Fix DesignWare PORT_LINK_CONTROL setup, which was corrupted when the
DT "snps,enable-cdm-check" property was present (Yoshihiro Shimoda)
* tag 'pci-v6.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: dwc: Fix PORT_LINK_CONTROL update when CDM check enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Deferred probe fix for v6.3.
This fixes a rarely triggered issue where we would treat probe
deferral for clocks as a fatal error in the fixed regulator, causing
it to fail to retry when it should"
* tag 'regulator-fix-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Handle deferred clk
|
|
Fixes speaker output and headset detection on Clevo X370SNW.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230331162317.14992-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.3
More fixes for v6.3, plus a few new trivial device ID additions.
Almost all of this is for the Intel drivers, though there is one
core fix from Shengjiu which ensures that format constraints are
correctly applied in some cases where they were missed.
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Mark Lexar NM760 as IGNORE_DEV_SUBNQN (Juraj Pecigos)
- Fix a possible UAF when failing to allocate an TCP io queue (Sagi
Grimberg)
- MD pull request via Song:
- Fix a null pointer deference in 6.3-rc (Yu Kuai)
- uevent partition fix (Alyssa)
* tag 'block-6.3-2023-03-30' of git://git.kernel.dk/linux:
nvme-tcp: fix a possible UAF when failing to allocate an io queue
md: fix regression for null-ptr-deference in __md_stop()
nvme-pci: mark Lexar NM760 as IGNORE_DEV_SUBNQN
loop: LOOP_CONFIGURE: send uevents for partitions
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a regression with the poll retry, introduced in this merge window
(me)
- Fix a regression with the alloc cache not decrementing the member
count on removal. Also a regression from this merge window (Pavel)
- Fix race around rsrc node grabbing (Pavel)
* tag 'io_uring-6.3-2023-03-30' of git://git.kernel.dk/linux:
io_uring: fix poll/netmsg alloc caches
io_uring/rsrc: fix rogue rsrc node grabbing
io_uring/poll: clear single/double poll flags on poll arming
|
|
Commit 5829f8a897e4 ("platform/x86: ideapad-laptop: Send
KEY_TOUCHPAD_TOGGLE on some models") made ideapad-laptop send
KEY_TOUCHPAD_TOGGLE when we receive an ACPI notify with VPC event bit 5 set
and the touchpad-state has not been changed by the EC itself already.
This was done under the assumption that this would be good to do to make
the touchpad-toggle hotkey work on newer models where the EC does not
toggle the touchpad on/off itself (because it is not routed through
the PS/2 controller, but uses I2C).
But it turns out that at least some models, e.g. the Yoga 7-15ITL5 the EC
triggers an ACPI notify with VPC event bit 5 set on resume, which would
now cause a spurious KEY_TOUCHPAD_TOGGLE on resume to which the desktop
environment responds by disabling the touchpad in software, breaking
the touchpad (until manually re-enabled) on resume.
It was never confirmed that sending KEY_TOUCHPAD_TOGGLE actually improves
things on new models and at least some new models like the Yoga 7-15ITL5
don't have a touchpad on/off toggle hotkey at all, while still sending
ACPI notify events with VPC event bit 5 set.
So it seems best to revert the change to send KEY_TOUCHPAD_TOGGLE when
receiving an ACPI notify events with VPC event bit 5 and the touchpad
state as reported by the EC has not changed.
Note this is not a full revert the code to cache the last EC touchpad
state is kept to avoid sending spurious KEY_TOUCHPAD_ON / _OFF events
on resume.
Fixes: 5829f8a897e4 ("platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217234
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230330194644.64628-1-hdegoede@redhat.com
|
|
models
Make quirk_asus_tablet_mode apply on other ROG Flow X13 devices,
which only affects the GV301Q model before.
Signed-off-by: weiliang1503 <weiliang1503@gmail.com>
Link: https://lore.kernel.org/r/20230330114943.15057-1-weiliang1503@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add "X570S AORUS ELITE" to known working boards
Reported-by: Brandon Nielsen <nielsenb@jetfuse.net>
Link: https://lore.kernel.org/r/20230331014902.7864-1-nielsenb@jetfuse.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These remove two recently added excessive lockdep assertions from the
sysfs-related thermal code and fix two issues in Intel thermal
drivers.
Specifics:
- Drop two lockdep assertions producing false positive warnings from
the sysfs-related thermal core code (Rafael Wysocki)
- Fix handling of two recently added module parameters in the Intel
powerclamp thermal driver (David Arcari)
- Fix one more deadlock in the int340x thermal driver (Srinivas
Pandruvada)"
* tag 'thermal-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: powerclamp: Fix cpumask and max_idle module parameters
thermal: intel: int340x: processor_thermal: Fix additional deadlock
thermal: core: Drop excessive lockdep_assert_held() calls
|
