summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-02KVM: SVM: Zero out GDTR.base and IDTR.base on INITSean Christopherson
Explicitly set GDTR.base and IDTR.base to zero when intializing the VMCB. Functionally this only affects INIT, as the bases are implicitly set to zero on RESET by virtue of the VMCB being zero allocated. Per AMD's APM, GDTR.base and IDTR.base are zeroed after RESET and INIT. Fixes: 04d2cc7780d4 ("KVM: Move main vcpu loop into subarch independent code") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210713163324.627647-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: nVMX: Set LDTR to its architecturally defined value on nested VM-ExitSean Christopherson
Set L1's LDTR on VM-Exit per the Intel SDM: The host-state area does not contain a selector field for LDTR. LDTR is established as follows on all VM exits: the selector is cleared to 0000H, the segment is marked unusable and is otherwise undefined (although the base address is always canonical). This is likely a benign bug since the LDTR is unusable, as it means the L1 VMM is conditioned to reload its LDTR in order to function properly on bare metal. Fixes: 4704d0befb07 ("KVM: nVMX: Exiting from L2 to L1") Reviewed-by: Reiji Watanabe <reijiw@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210713163324.627647-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: x86: Flush the guest's TLB on INITSean Christopherson
Flush the guest's TLB on INIT, as required by Intel's SDM. Although AMD's APM states that the TLBs are unchanged by INIT, it's not clear that that's correct as the APM also states that the TLB is flush on "External initialization of the processor." Regardless, relying on the guest to be paranoid is unnecessarily risky, while an unnecessary flush is benign from a functional perspective and likely has no measurable impact on guest performance. Note, as of the April 2021 version of Intels' SDM, it also contradicts itself with respect to TLB flushing. The overview of INIT explicitly calls out the TLBs as being invalidated, while a table later in the same section says they are unchanged. 9.1 INITIALIZATION OVERVIEW: The major difference is that during an INIT, the internal caches, MSRs, MTRRs, and x87 FPU state are left unchanged (although, the TLBs and BTB are invalidated as with a hardware reset) Table 9-1: Register Power up Reset INIT Data and Code Cache, TLBs: Invalid[6] Invalid[6] Unchanged Given Core2's erratum[*] about global TLB entries not being flush on INIT, it's safe to assume that the table is simply wrong. AZ28. INIT Does Not Clear Global Entries in the TLB Problem: INIT may not flush a TLB entry when: • The processor is in protected mode with paging enabled and the page global enable flag is set (PGE bit of CR4 register) • G bit for the page table entry is set • TLB entry is present in TLB when INIT occurs • Software may encounter unexpected page fault or incorrect address translation due to a TLB entry erroneously left in TLB after INIT. Workaround: Write to CR3, CR4 (setting bits PSE, PGE or PAE) or CR0 (setting bits PG or PE) registers before writing to memory early in BIOS code to clear all the global entries from TLB. Status: For the steppings affected, see the Summary Tables of Changes. [*] https://www.intel.com/content/dam/support/us/en/documents/processors/mobile/celeron/sb/320121.pdf Fixes: 6aa8b732ca01 ("[PATCH] kvm: userspace interface") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210713163324.627647-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: x86: APICv: drop immediate APICv disablement on current vCPUMaxim Levitsky
Special case of disabling the APICv on the current vCPU right away in kvm_request_apicv_update doesn't bring much benefit vs raising KVM_REQ_APICV_UPDATE on it instead, since this request will be processed on the next entry to the guest. (the comment about having another #VMEXIT is wrong). It also hides various assumptions that APIVc enable state matches the APICv inhibit state, as this special case only makes those states match on the current vCPU. Previous patches fixed few such assumptions so now it should be safe to drop this special case. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210713142023.106183-5-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: x86: enable TDP MMU by defaultPaolo Bonzini
With the addition of fast page fault support, the TDP-specific MMU has reached feature parity with the original MMU. All my testing in the last few months has been done with the TDP MMU; switch the default on 64-bit machines. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: x86/mmu: fast_page_fault support for the TDP MMUDavid Matlack
Make fast_page_fault interoperate with the TDP MMU by leveraging walk_shadow_page_lockless_{begin,end} to acquire the RCU read lock and introducing a new helper function kvm_tdp_mmu_fast_pf_get_last_sptep to grab the lowest level sptep. Suggested-by: Ben Gardon <bgardon@google.com> Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20210713220957.3493520-5-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: x86/mmu: Make walk_shadow_page_lockless_{begin,end} interoperate with ↵David Matlack
the TDP MMU Acquire the RCU read lock in walk_shadow_page_lockless_begin and release it in walk_shadow_page_lockless_end when the TDP MMU is enabled. This should not introduce any functional changes but is used in the following commit to make fast_page_fault interoperate with the TDP MMU. Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20210713220957.3493520-4-dmatlack@google.com> [Use if...else instead of if(){return;}] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: x86/mmu: Fix use of enums in trace_fast_page_faultDavid Matlack
Enum values have to be exported to userspace since the formatting is not done in the kernel. Without doing this perf maps RET_PF_FIXED and RET_PF_SPURIOUS to 0, which results in incorrect output: $ perf record -a -e kvmmmu:fast_page_fault --filter "ret==3" -- ./access_tracking_perf_test $ perf script | head -1 [...] new 610006048d25877 spurious 0 fixed 0 <------ should be 1 Fix this by exporting the enum values to userspace with TRACE_DEFINE_ENUM. Fixes: c4371c2a682e ("KVM: x86/mmu: Return unique RET_PF_* values if the fault was fixed") Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20210713220957.3493520-3-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: x86/mmu: Rename cr2_or_gpa to gpa in fast_page_faultDavid Matlack
fast_page_fault is only called from direct_page_fault where we know the address is a gpa. Fixes: 736c291c9f36 ("KVM: x86: Use gpa_t for cr2/gpa to fix TDP support on 32-bit KVM") Reviewed-by: Ben Gardon <bgardon@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20210713220957.3493520-2-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: Introduce kvm_get_kvm_safe()Peter Xu
Introduce this safe version of kvm_get_kvm() so that it can be called even during vm destruction. Use it in kvm_debugfs_open() and remove the verbose comment. Prepare to be used elsewhere. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20210625153214.43106-3-peterx@redhat.com> [Preserve the comment in kvm_debugfs_open. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02x86/kvm: remove non-x86 stuff from arch/x86/kvm/ioapic.hJuergen Gross
The file has been moved to arch/x86 long time ago. Time to get rid of non-x86 stuff. Signed-off-by: Juergen Gross <jgross@suse.com> Message-Id: <20210701154105.23215-3-jgross@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: X86: Add per-vm stat for max rmap list sizePeter Xu
Add a new statistic max_mmu_rmap_size, which stores the maximum size of rmap for the vm. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20210625153214.43106-2-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: x86/mmu: Return old SPTE from mmu_spte_clear_track_bits()Sean Christopherson
Return the old SPTE when clearing a SPTE and push the "old SPTE present" check to the caller. Private shadow page support will use the old SPTE in rmap_remove() to determine whether or not there is a linked private shadow page. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <b16bac1fd1357aaf39e425aab2177d3f89ee8318.1625186503.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: x86/mmu: Refactor shadow walk in __direct_map() to reduce indentationSean Christopherson
Employ a 'continue' to reduce the indentation for linking a new shadow page during __direct_map() in preparation for linking private pages. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <702419686d5700373123f6ea84e7a946c2cad8b4.1625186503.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: x86: Hoist kvm_dirty_regs check out of sync_regs()Sean Christopherson
Move the kvm_dirty_regs vs. KVM_SYNC_X86_VALID_FIELDS check out of sync_regs() and into its sole caller, kvm_arch_vcpu_ioctl_run(). This allows a future patch to allow synchronizing select state for protected VMs. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <889017a8d31cea46472e0c64b234ef5919278ed9.1625186503.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: x86/mmu: Mark VM as bugged if page fault returns RET_PF_INVALIDSean Christopherson
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <298980aa5fc5707184ac082287d13a800cd9c25f.1625186503.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: x86: Use KVM_BUG/KVM_BUG_ON to handle bugs that are fatal to the VMSean Christopherson
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <0e8760a26151f47dc47052b25ca8b84fffe0641e.1625186503.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: Export kvm_make_all_cpus_request() for use in marking VMs as buggedSean Christopherson
Export kvm_make_all_cpus_request() and hoist the request helper declarations of request up to the KVM_REQ_* definitions in preparation for adding a "VM bugged" framework. The framework will add KVM_BUG() and KVM_BUG_ON() as alternatives to full BUG()/BUG_ON() for cases where KVM has definitely hit a bug (in itself or in silicon) and the VM is all but guaranteed to be hosed. Marking a VM bugged will trigger a request to all vCPUs to allow arch code to forcefully evict each vCPU from its run loop. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Message-Id: <1d8cbbc8065d831343e70b5dcaea92268145eef1.1625186503.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-02KVM: Add infrastructure and macro to mark VM as buggedSean Christopherson
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <3a0998645c328bf0895f1290e61821b70f048549.1625186503.git.isaku.yamahata@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-30KVM: x86: accept userspace interrupt only if no event is injectedPaolo Bonzini
Once an exception has been injected, any side effects related to the exception (such as setting CR2 or DR6) have been taked place. Therefore, once KVM sets the VM-entry interruption information field or the AMD EVENTINJ field, the next VM-entry must deliver that exception. Pending interrupts are processed after injected exceptions, so in theory it would not be a problem to use KVM_INTERRUPT when an injected exception is present. However, DOSEMU is using run->ready_for_interrupt_injection to detect interrupt windows and then using KVM_SET_SREGS/KVM_SET_REGS to inject the interrupt manually. For this to work, the interrupt window must be delayed after the completion of the previous event injection. Cc: stable@vger.kernel.org Reported-by: Stas Sergeev <stsp2@yandex.ru> Tested-by: Stas Sergeev <stsp2@yandex.ru> Fixes: 71cc849b7093 ("KVM: x86: Fix split-irqchip vs interrupt injection window request") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27KVM: add missing compat KVM_CLEAR_DIRTY_LOGPaolo Bonzini
The arguments to the KVM_CLEAR_DIRTY_LOG ioctl include a pointer, therefore it needs a compat ioctl implementation. Otherwise, 32-bit userspace fails to invoke it on 64-bit kernels; for x86 it might work fine by chance if the padding is zero, but not on big-endian architectures. Reported-by: Thomas Sattler Cc: stable@vger.kernel.org Fixes: 2a31b9db1535 ("kvm: introduce manual dirty log reprotect") Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27KVM: use cpu_relax when halt pollingLi RongQing
SMT siblings share caches and other hardware, and busy halt polling will degrade its sibling performance if its sibling is working Sean Christopherson suggested as below: "Rather than disallowing halt-polling entirely, on x86 it should be sufficient to simply have the hardware thread yield to its sibling(s) via PAUSE. It probably won't get back all performance, but I would expect it to be close. This compiles on all KVM architectures, and AFAICT the intended usage of cpu_relax() is identical for all architectures." Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Message-Id: <20210727111247.55510-1-lirongqing@baidu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27KVM: SVM: use vmcb01 in svm_refresh_apicv_exec_ctrlMaxim Levitsky
Currently when SVM is enabled in guest CPUID, AVIC is inhibited as soon as the guest CPUID is set. AVIC happens to be fully disabled on all vCPUs by the time any guest entry starts (if after migration the entry can be nested). The reason is that currently we disable avic right away on vCPU from which the kvm_request_apicv_update was called and for this case, it happens to be called on all vCPUs (by svm_vcpu_after_set_cpuid). After we stop doing this, AVIC will end up being disabled only when KVM_REQ_APICV_UPDATE is processed which is after we done switching to the nested guest. Fix this by just using vmcb01 in svm_refresh_apicv_exec_ctrl for avic (which is a right thing to do anyway). Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210713142023.106183-4-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27KVM: SVM: tweak warning about enabled AVIC on nested entryMaxim Levitsky
It is possible that AVIC was requested to be disabled but not yet disabled, e.g if the nested entry is done right after svm_vcpu_after_set_cpuid. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210713142023.106183-3-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27KVM: SVM: svm_set_vintr don't warn if AVIC is active but is about to be ↵Maxim Levitsky
deactivated It is possible for AVIC inhibit and AVIC active state to be mismatched. Currently we disable AVIC right away on vCPU which started the AVIC inhibit request thus this warning doesn't trigger but at least in theory, if svm_set_vintr is called at the same time on multiple vCPUs, the warning can happen. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210713142023.106183-2-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27KVM: s390: restore old debugfs namesChristian Borntraeger
commit bc9e9e672df9 ("KVM: debugfs: Reuse binary stats descriptors") did replace the old definitions with the binary ones. While doing that it missed that some files are names different than the counters. This is especially important for kvm_stat which does have special handling for counters named instruction_*. Fixes: commit bc9e9e672df9 ("KVM: debugfs: Reuse binary stats descriptors") CC: Jing Zhang <jingzhangos@google.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20210726150108.5603-1-borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initializedPaolo Bonzini
Right now, svm_hv_vmcb_dirty_nested_enlightenments has an incorrect dereference of vmcb->control.reserved_sw before the vmcb is checked for being non-NULL. The compiler is usually sinking the dereference after the check; instead of doing this ourselves in the source, ensure that svm_hv_vmcb_dirty_nested_enlightenments is only called with a non-NULL VMCB. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Vineeth Pillai <viremana@linux.microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [Untested for now due to issues with my AMD machine. - Paolo]
2021-07-27KVM: selftests: Introduce access_tracking_perf_testDavid Matlack
This test measures the performance effects of KVM's access tracking. Access tracking is driven by the MMU notifiers test_young, clear_young, and clear_flush_young. These notifiers do not have a direct userspace API, however the clear_young notifier can be triggered by marking a pages as idle in /sys/kernel/mm/page_idle/bitmap. This test leverages that mechanism to enable access tracking on guest memory. To measure performance this test runs a VM with a configurable number of vCPUs that each touch every page in disjoint regions of memory. Performance is measured in the time it takes all vCPUs to finish touching their predefined region. Example invocation: $ ./access_tracking_perf_test -v 8 Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages guest physical test memory offset: 0xffdfffff000 Populating memory : 1.337752570s Writing to populated memory : 0.010177640s Reading from populated memory : 0.009548239s Mark memory idle : 23.973131748s Writing to idle memory : 0.063584496s Mark memory idle : 24.924652964s Reading from idle memory : 0.062042814s Breaking down the results: * "Populating memory": The time it takes for all vCPUs to perform the first write to every page in their region. * "Writing to populated memory" / "Reading from populated memory": The time it takes for all vCPUs to write and read to every page in their region after it has been populated. This serves as a control for the later results. * "Mark memory idle": The time it takes for every vCPU to mark every page in their region as idle through page_idle. * "Writing to idle memory" / "Reading from idle memory": The time it takes for all vCPUs to write and read to every page in their region after it has been marked idle. This test should be portable across architectures but it is only enabled for x86_64 since that's all I have tested. Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20210713220957.3493520-7-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27KVM: selftests: Fix missing break in dirty_log_perf_test arg parsingDavid Matlack
There is a missing break statement which causes a fallthrough to the next statement where optarg will be null and a segmentation fault will be generated. Fixes: 9e965bb75aae ("KVM: selftests: Add backing src parameter to dirty_log_perf_test") Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20210713220957.3493520-6-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-27x86/kvm: fix vcpu-id indexed array sizesJuergen Gross
KVM_MAX_VCPU_ID is the maximum vcpu-id of a guest, and not the number of vcpu-ids. Fix array indexed by vcpu-id to have KVM_MAX_VCPU_ID+1 elements. Note that this is currently no real problem, as KVM_MAX_VCPU_ID is an odd number, resulting in always enough padding being available at the end of those arrays. Nevertheless this should be fixed in order to avoid rare problems in case someone is using an even number for KVM_MAX_VCPU_ID. Signed-off-by: Juergen Gross <jgross@suse.com> Message-Id: <20210701154105.23215-2-jgross@suse.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-26KVM: x86: Check the right feature bit for MSR_KVM_ASYNC_PF_ACK accessVitaly Kuznetsov
MSR_KVM_ASYNC_PF_ACK MSR is part of interrupt based asynchronous page fault interface and not the original (deprecated) KVM_FEATURE_ASYNC_PF. This is stated in Documentation/virt/kvm/msr.rst. Fixes: 66570e966dd9 ("kvm: x86: only provide PV features if enabled in guest's CPUID") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Oliver Upton <oupton@google.com> Message-Id: <20210722123018.260035-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-26docs: virt: kvm: api.rst: replace some charactersMauro Carvalho Chehab
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST conversion and some cut-and-pasted text contain some characters that aren't easily reachable on standard keyboards and/or could cause troubles when parsed by the documentation build system. Replace the occurences of the following characters: - U+00a0 (' '): NO-BREAK SPACE as it can cause lines being truncated on PDF output Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Message-Id: <ff70cb42d63f3a1da66af1b21b8d038418ed5189.1626947264.git.mchehab+huawei@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-26KVM: Documentation: Fix KVM_CAP_ENFORCE_PV_FEATURE_CPUID nameVitaly Kuznetsov
'KVM_CAP_ENFORCE_PV_CPUID' doesn't match the define in include/uapi/linux/kvm.h. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210722092628.236474-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-26KVM: nSVM: Swap the parameter order for ↵Vitaly Kuznetsov
svm_copy_vmrun_state()/svm_copy_vmloadsave_state() Make svm_copy_vmrun_state()/svm_copy_vmloadsave_state() interface match 'memcpy(dest, src)' to avoid any confusion. No functional change intended. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210719090322.625277-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-26KVM: nSVM: Rename nested_svm_vmloadsave() to svm_copy_vmloadsave_state()Vitaly Kuznetsov
To match svm_copy_vmrun_state(), rename nested_svm_vmloadsave() to svm_copy_vmloadsave_state(). Opportunistically add missing braces to 'else' branch in vmload_vmsave_interception(). No functional change intended. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210716144104.465269-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-07-19Merge tag 'kvmarm-fixes-5.14-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.14, take #1 - Fix MTE shared page detection - Fix selftest use of obsolete pthread_yield() in favour of sched_yield() - Enable selftest's use of PMU registers when asked to
2021-07-18Linux 5.14-rc2v5.14-rc2Linus Torvalds
2021-07-18Merge tag 'perf-tools-fixes-for-v5.14-2021-07-18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Skip invalid hybrid PMU on hybrid systems when the atom (little) CPUs are offlined. - Fix 'perf test' problems related to the recently added hybrid (BIG/little) code. - Split ARM's coresight (hw tracing) decode by aux records to avoid fatal decoding errors. - Fix add event failure in 'perf probe' when running 32-bit perf in a 64-bit kernel. - Fix 'perf sched record' failure when CONFIG_SCHEDSTATS is not set. - Fix memory and refcount leaks detected by ASAn when running 'perf test', should be clean of warnings now. - Remove broken definition of __LITTLE_ENDIAN from tools' linux/kconfig.h, which was breaking the build in some systems. - Cast PTHREAD_STACK_MIN to int as it may turn into 'long sysconf(__SC_THREAD_STACK_MIN_VALUE), breaking the build in some systems. - Fix libperf build error with LIBPFM4=1. - Sync UAPI files changed by the memfd_secret new syscall. * tag 'perf-tools-fixes-for-v5.14-2021-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (35 commits) perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernel perf data: Close all files in close_dir() perf probe-file: Delete namelist in del_events() on the error path perf test bpf: Free obj_buf perf trace: Free strings in trace__parse_events_option() perf trace: Free syscall tp fields in evsel->priv perf trace: Free syscall->arg_fmt perf trace: Free malloc'd trace fields on exit perf lzma: Close lzma stream on exit perf script: Fix memory 'threads' and 'cpus' leaks on exit perf script: Release zstd data perf session: Cleanup trace_event perf inject: Close inject.output on exit perf report: Free generated help strings for sort option perf env: Fix memory leak of cpu_pmu_caps perf test maps__merge_in: Fix memory leak of maps perf dso: Fix memory leak in dso__new_map() perf test event_update: Fix memory leak of unit perf test event_update: Fix memory leak of evlist ...
2021-07-18Merge tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Darrick Wong: "A few fixes for issues in the new online shrink code, additional corrections for my recent bug-hunt w.r.t. extent size hints on realtime, and improved input checking of the GROWFSRT ioctl. IOW, the usual 'I somehow got bored during the merge window and resumed auditing the farther reaches of xfs': - Fix shrink eligibility checking when sparse inode clusters enabled - Reset '..' directory entries when unlinking directories to prevent verifier errors if fs is shrinked later - Don't report unusable extent size hints to FSGETXATTR - Don't warn when extent size hints are unusable because the sysadmin configured them that way - Fix insufficient parameter validation in GROWFSRT ioctl - Fix integer overflow when adding rt volumes to filesystem" * tag 'xfs-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: detect misaligned rtinherit directory extent size hints xfs: fix an integer overflow error in xfs_growfs_rt xfs: improve FSGROWFSRT precondition checking xfs: don't expose misaligned extszinherit hints to userspace xfs: correct the narrative around misaligned rtinherit/extszinherit dirs xfs: reset child dir '..' entry when unlinking child xfs: check for sparse inode clusters that cross new EOAG when shrinking
2021-07-18Merge tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull iomap fixes from Darrick Wong: "A handful of bugfixes for the iomap code. There's nothing especially exciting here, just fixes for UBSAN (not KASAN as I erroneously wrote in the tag message) warnings about undefined behavior in the SEEK_DATA/SEEK_HOLE code, and some reshuffling of per-page block state info to fix some problems with gfs2. - Fix KASAN warnings due to integer overflow in SEEK_DATA/SEEK_HOLE - Fix assertion errors when using inlinedata files on gfs2" * tag 'iomap-5.14-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: Don't create iomap_page objects in iomap_page_mkwrite_actor iomap: Don't create iomap_page objects for inline files iomap: Permit pages without an iop to enter writeback iomap: remove the length variable in iomap_seek_hole iomap: remove the length variable in iomap_seek_data
2021-07-18Merge tag 'kbuild-fixes-v5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Restore the original behavior of scripts/setlocalversion when LOCALVERSION is set to empty. - Show Kconfig prompts even for 'make -s' - Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y for older GNU Make versions * tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Documentation: Fix intiramfs script name Kbuild: lto: fix module versionings mismatch in GNU make 3.X kbuild: do not suppress Kconfig prompts for silent build scripts/setlocalversion: fix a bug when LOCALVERSION is empty
2021-07-18Documentation: Fix intiramfs script nameRobert Richter
Documentation was not changed when renaming the script in commit 80e715a06c2d ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh"). Fixing this. Basically does: $ sed -i -e s/gen_initramfs_list.sh/gen_initramfs.sh/g $(git grep -l gen_initramfs_list.sh) Fixes: 80e715a06c2d ("initramfs: rename gen_initramfs_list.sh to gen_initramfs.sh") Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-07-18Kbuild: lto: fix module versionings mismatch in GNU make 3.XLecopzer Chen
When building modules(CONFIG_...=m), I found some of module versions are incorrect and set to 0. This can be found in build log for first clean build which shows WARNING: EXPORT symbol "XXXX" [drivers/XXX/XXX.ko] version generation failed, symbol will not be versioned. But in second build(incremental build), the WARNING disappeared and the module version becomes valid CRC and make someone who want to change modules without updating kernel image can't insert their modules. The problematic code is + $(foreach n, $(filter-out FORCE,$^), \ + $(if $(wildcard $(n).symversions), \ + ; cat $(n).symversions >> $@.symversions)) For example: rm -f fs/notify/built-in.a.symversions ; rm -f fs/notify/built-in.a; \ llvm-ar cDPrST fs/notify/built-in.a fs/notify/fsnotify.o \ fs/notify/notification.o fs/notify/group.o ... `foreach n` shows nothing to `cat` into $(n).symversions because `if $(wildcard $(n).symversions)` return nothing, but actually they do exist during this line was executed. -rw-r--r-- 1 root root 168580 Jun 13 19:10 fs/notify/fsnotify.o -rw-r--r-- 1 root root 111 Jun 13 19:10 fs/notify/fsnotify.o.symversions The reason is the $(n).symversions are generated at runtime, but Makefile wildcard function expends and checks the file exist or not during parsing the Makefile. Thus fix this by use `test` shell command to check the file existence in runtime. Rebase from both: 1. [https://lore.kernel.org/lkml/20210616080252.32046-1-lecopzer.chen@mediatek.com/] 2. [https://lore.kernel.org/lkml/20210702032943.7865-1-lecopzer.chen@mediatek.com/] Fixes: 38e891849003 ("kbuild: lto: fix module versioning") Co-developed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-07-18kbuild: do not suppress Kconfig prompts for silent buildMasahiro Yamada
When a new CONFIG option is available, Kbuild shows a prompt to get the user input. $ make [ snip ] Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW) This is the only interactive place in the build process. Commit 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build") suppressed Kconfig prompts as well because syncconfig is invoked by the 'cmd' macro. You cannot notice the fact that Kconfig is waiting for the user input. Use 'kecho' to show the equivalent short log without suppressing stdout from sub-make. Fixes: 174a1dcc9642 ("kbuild: sink stdout from cmd for silent build") Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
2021-07-18scripts/setlocalversion: fix a bug when LOCALVERSION is emptyMikulas Patocka
The commit 042da426f8eb ("scripts/setlocalversion: simplify the short version part") reduces indentation. Unfortunately, it also changes behavior in a subtle way - if the user has empty "LOCALVERSION" variable, the plus sign is appended to the kernel version. It wasn't appended before. This patch reverts to the old behavior - we append the plus sign only if the LOCALVERSION variable is not set. Fixes: 042da426f8eb ("scripts/setlocalversion: simplify the short version part") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-07-18perf sched: Fix record failure when CONFIG_SCHEDSTATS is not setYang Jihong
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events. As a result, the command fails. Before: #perf sched record sleep 1 event syntax error: 'sched:sched_stat_wait' \___ unknown tracepoint Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] -e, --event <event> event selector. use 'perf list' to list available events Solution: Check whether schedstat tracepoints are exposed. If no, these events are not recorded. After: # perf sched record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ] # perf sched report run measurement overhead: 4736 nsecs sleep measurement overhead: 9059979 nsecs the run test took 999854 nsecs the sleep test took 8945271 nsecs nr_run_events: 716 nr_sleep_events: 785 nr_wakeup_events: 0 ... ------------------------------------------------------------ Fixes: 2a09b5de235a6 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Yafang Shao <laoar.shao@gmail.com> Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-18perf probe: Fix add event failure when running 32-bit perf in a 64-bit kernelYang Jihong
The "address" member of "struct probe_trace_point" uses long data type. If kernel is 64-bit and perf program is 32-bit, size of "address" variable is 32 bits. As a result, upper 32 bits of address read from kernel are truncated, an error occurs during address comparison in kprobe_warn_out_range(). Before: # perf probe -a schedule schedule is out of .text, skip it. Error: Failed to add events. Solution: Change data type of "address" variable to u64 and change corresponding address printing and value assignment. After: # perf.new.new probe -a schedule Added new event: probe:schedule (on schedule) You can now use it in all perf tools, such as: perf record -e probe:schedule -aR sleep 1 # perf probe -l probe:schedule (on schedule@kernel/sched/core.c) # perf record -e probe:schedule -aR sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.156 MB perf.data (1366 samples) ] # perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 1K of event 'probe:schedule' # Event count (approx.): 1366 # # Overhead Command Shared Object Symbol # ........ ............... ................. ............ # 6.22% migration/0 [kernel.kallsyms] [k] schedule 6.22% migration/1 [kernel.kallsyms] [k] schedule 6.22% migration/2 [kernel.kallsyms] [k] schedule 6.22% migration/3 [kernel.kallsyms] [k] schedule 6.15% migration/10 [kernel.kallsyms] [k] schedule 6.15% migration/11 [kernel.kallsyms] [k] schedule 6.15% migration/12 [kernel.kallsyms] [k] schedule 6.15% migration/13 [kernel.kallsyms] [k] schedule 6.15% migration/14 [kernel.kallsyms] [k] schedule 6.15% migration/15 [kernel.kallsyms] [k] schedule 6.15% migration/4 [kernel.kallsyms] [k] schedule 6.15% migration/5 [kernel.kallsyms] [k] schedule 6.15% migration/6 [kernel.kallsyms] [k] schedule 6.15% migration/7 [kernel.kallsyms] [k] schedule 6.15% migration/8 [kernel.kallsyms] [k] schedule 6.15% migration/9 [kernel.kallsyms] [k] schedule 0.22% rcu_sched [kernel.kallsyms] [k] schedule ... # # (Cannot load tips.txt file, please install perf!) # Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jianlin Lv <jianlin.lv@arm.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lore.kernel.org/lkml/20210715063723.11926-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-18perf data: Close all files in close_dir()Riccardo Mancini
When using 'perf report' in directory mode, the first file is not closed on exit, causing a memory leak. The problem is caused by the iterating variable never reaching 0. Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions") Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhen Lei <thunder.leizhen@huawei.com> Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-18perf probe-file: Delete namelist in del_events() on the error pathRiccardo Mancini
ASan reports some memory leaks when running: # perf test "42: BPF filter" This second leak is caused by a strlist not being dellocated on error inside probe_file__del_events. This patch adds a goto label before the deallocation and makes the error path jump to it. Signed-off-by: Riccardo Mancini <rickyman7@gmail.com> Fixes: e7895e422e4da63d ("perf probe: Split del_perf_probe_events()") Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-17Merge tag 'soc-fixes-5.14-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Here are the patches for this week that came as the fallout of the merge window: - Two fixes for the NVidia memory controller driver - multiple defconfig files get patched to turn CONFIG_FB back on after that is no longer selected by CONFIG_DRM - ffa and scmpi firmware drivers fixes, mostly addressing compiler and documentation warnings - Platform specific fixes for device tree files on ASpeed, Renesas and NVidia SoC, mostly for recent regressions. - A workaround for a regression on the USB PHY with devlink when the usb-nop-xceiv driver is not available until the rootfs is mounted. - Device tree compiler warnings in Arm Versatile-AB" * tag 'soc-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: dts: versatile: Fix up interrupt controller node names ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in ARM: configs: Update u8500_defconfig ARM: configs: Update Vexpress defconfig ARM: configs: Update Versatile defconfig ARM: configs: Update RealView defconfig ARM: configs: Update Integrator defconfig arm: Typo s/PCI_IXP4XX_LEGACY/IXP4XX_PCI_LEGACY/ firmware: arm_scmi: Fix range check for the maximum number of pending messages firmware: arm_scmi: Avoid padding in sensor message structure firmware: arm_scmi: Fix kernel doc warnings about return values firmware: arm_scpi: Fix kernel doc warnings firmware: arm_scmi: Fix kernel doc warnings ARM: shmobile: defconfig: Restore graphical consoles firmware: arm_ffa: Fix a possible ffa_linux_errmap buffer overflow firmware: arm_ffa: Fix the comment style firmware: arm_ffa: Simplify probe function firmware: arm_ffa: Ensure drivers provide a probe function firmware: arm_scmi: Fix possible scmi_linux_errmap buffer overflow firmware: arm_scmi: Ensure drivers provide a probe function ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 00:51:10 +0000