Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.11
Hopefully final fixes for v6.11 and this time only fixes to ath11k
driver. We need to revert hibernation support due to reported
regressions and we have a fix for kernel crash introduced in
v6.11-rc1.
* tag 'wireless-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: cw1200: add net-cw1200.h
Revert "wifi: ath11k: support hibernation"
Revert "wifi: ath11k: restore country code during resume"
wifi: ath11k: fix NULL pointer dereference in ath11k_mac_get_eirp_power()
====================
Link: https://patch.msgid.link/20240904135906.5986EC4CECA@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
axienet_dma_err_handler can race with axienet_stop in the following
manner:
CPU 1 CPU 2
====================== ==================
axienet_stop()
napi_disable()
axienet_dma_stop()
axienet_dma_err_handler()
napi_disable()
axienet_dma_stop()
axienet_dma_start()
napi_enable()
cancel_work_sync()
free_irq()
Fix this by setting a flag in axienet_stop telling
axienet_dma_err_handler not to bother doing anything. I chose not to use
disable_work_sync to allow for easier backporting.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Link: https://patch.msgid.link/20240903175141.4132898-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When userspace wants to take over a fdb entry by setting it as
EXTERN_LEARNED, we set both flags BR_FDB_ADDED_BY_EXT_LEARN and
BR_FDB_ADDED_BY_USER in br_fdb_external_learn_add().
If the bridge updates the entry later because its port changed, we clear
the BR_FDB_ADDED_BY_EXT_LEARN flag, but leave the BR_FDB_ADDED_BY_USER
flag set.
If userspace then wants to take over the entry again,
br_fdb_external_learn_add() sees that BR_FDB_ADDED_BY_USER and skips
setting the BR_FDB_ADDED_BY_EXT_LEARN flags, thus silently ignores the
update.
Fix this by always allowing to set BR_FDB_ADDED_BY_EXT_LEARN regardless
if this was a user fdb entry or not.
Fixes: 710ae7287737 ("net: bridge: Mark FDB entries that were added by user as such")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240903081958.29951-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
generic_ocp_write() asks the parameter "size" must be 4 bytes align.
Therefore, write the bp would fail, if the mac->bp_num is odd. Align the
size to 4 for fixing it. The way may write an extra bp, but the
rtl8152_is_fw_mac_ok() makes sure the value must be 0 for the bp whose
index is more than mac->bp_num. That is, there is no influence for the
firmware.
Besides, I check the return value of generic_ocp_write() to make sure
everything is correct.
Fixes: e5c266a61186 ("r8152: set bp in bulk")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://patch.msgid.link/20240903063333.4502-1-hayeswang@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We observed a null-ptr-deref in fou_gro_receive() while shutting down
a host. [0]
The NULL pointer is sk->sk_user_data, and the offset 8 is of protocol
in struct fou.
When fou_release() is called due to netns dismantle or explicit tunnel
teardown, udp_tunnel_sock_release() sets NULL to sk->sk_user_data.
Then, the tunnel socket is destroyed after a single RCU grace period.
So, in-flight udp4_gro_receive() could find the socket and execute the
FOU GRO handler, where sk->sk_user_data could be NULL.
Let's use rcu_dereference_sk_user_data() in fou_from_sock() and add NULL
checks in FOU GRO handlers.
[0]:
BUG: kernel NULL pointer dereference, address: 0000000000000008
PF: supervisor read access in kernel mode
PF: error_code(0x0000) - not-present page
PGD 80000001032f4067 P4D 80000001032f4067 PUD 103240067 PMD 0
SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.216-204.855.amzn2.x86_64 #1
Hardware name: Amazon EC2 c5.large/, BIOS 1.0 10/16/2017
RIP: 0010:fou_gro_receive (net/ipv4/fou.c:233) [fou]
Code: 41 5f c3 cc cc cc cc e8 e7 2e 69 f4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 49 89 f8 41 54 48 89 f7 48 89 d6 49 8b 80 88 02 00 00 <0f> b6 48 08 0f b7 42 4a 66 25 fd fd 80 cc 02 66 89 42 4a 0f b6 42
RSP: 0018:ffffa330c0003d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff93d9e3a6b900 RCX: 0000000000000010
RDX: ffff93d9e3a6b900 RSI: ffff93d9e3a6b900 RDI: ffff93dac2e24d08
RBP: ffff93d9e3a6b900 R08: ffff93dacbce6400 R09: 0000000000000002
R10: 0000000000000000 R11: ffffffffb5f369b0 R12: ffff93dacbce6400
R13: ffff93dac2e24d08 R14: 0000000000000000 R15: ffffffffb4edd1c0
FS: 0000000000000000(0000) GS:ffff93daee800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000102140001 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? show_trace_log_lvl (arch/x86/kernel/dumpstack.c:259)
? __die_body.cold (arch/x86/kernel/dumpstack.c:478 arch/x86/kernel/dumpstack.c:420)
? no_context (arch/x86/mm/fault.c:752)
? exc_page_fault (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 arch/x86/mm/fault.c:1435 arch/x86/mm/fault.c:1483)
? asm_exc_page_fault (arch/x86/include/asm/idtentry.h:571)
? fou_gro_receive (net/ipv4/fou.c:233) [fou]
udp_gro_receive (include/linux/netdevice.h:2552 net/ipv4/udp_offload.c:559)
udp4_gro_receive (net/ipv4/udp_offload.c:604)
inet_gro_receive (net/ipv4/af_inet.c:1549 (discriminator 7))
dev_gro_receive (net/core/dev.c:6035 (discriminator 4))
napi_gro_receive (net/core/dev.c:6170)
ena_clean_rx_irq (drivers/amazon/net/ena/ena_netdev.c:1558) [ena]
ena_io_poll (drivers/amazon/net/ena/ena_netdev.c:1742) [ena]
napi_poll (net/core/dev.c:6847)
net_rx_action (net/core/dev.c:6917)
__do_softirq (arch/x86/include/asm/jump_label.h:25 include/linux/jump_label.h:200 include/trace/events/irq.h:142 kernel/softirq.c:299)
asm_call_irq_on_stack (arch/x86/entry/entry_64.S:809)
</IRQ>
do_softirq_own_stack (arch/x86/include/asm/irq_stack.h:27 arch/x86/include/asm/irq_stack.h:77 arch/x86/kernel/irq_64.c:77)
irq_exit_rcu (kernel/softirq.c:393 kernel/softirq.c:423 kernel/softirq.c:435)
common_interrupt (arch/x86/kernel/irq.c:239)
asm_common_interrupt (arch/x86/include/asm/idtentry.h:626)
RIP: 0010:acpi_idle_do_entry (arch/x86/include/asm/irqflags.h:49 arch/x86/include/asm/irqflags.h:89 drivers/acpi/processor_idle.c:114 drivers/acpi/processor_idle.c:575)
Code: 8b 15 d1 3c c4 02 ed c3 cc cc cc cc 65 48 8b 04 25 40 ef 01 00 48 8b 00 a8 08 75 eb 0f 1f 44 00 00 0f 00 2d d5 09 55 00 fb f4 <fa> c3 cc cc cc cc e9 be fc ff ff 66 66 2e 0f 1f 84 00 00 00 00 00
RSP: 0018:ffffffffb5603e58 EFLAGS: 00000246
RAX: 0000000000004000 RBX: ffff93dac0929c00 RCX: ffff93daee833900
RDX: ffff93daee800000 RSI: ffff93daee87dc00 RDI: ffff93daee87dc64
RBP: 0000000000000001 R08: ffffffffb5e7b6c0 R09: 0000000000000044
R10: ffff93daee831b04 R11: 00000000000001cd R12: 0000000000000001
R13: ffffffffb5e7b740 R14: 0000000000000001 R15: 0000000000000000
? sched_clock_cpu (kernel/sched/clock.c:371)
acpi_idle_enter (drivers/acpi/processor_idle.c:712 (discriminator 3))
cpuidle_enter_state (drivers/cpuidle/cpuidle.c:237)
cpuidle_enter (drivers/cpuidle/cpuidle.c:353)
cpuidle_idle_call (kernel/sched/idle.c:158 kernel/sched/idle.c:239)
do_idle (kernel/sched/idle.c:302)
cpu_startup_entry (kernel/sched/idle.c:395 (discriminator 1))
start_kernel (init/main.c:1048)
secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:310)
Modules linked in: udp_diag tcp_diag inet_diag nft_nat ipip tunnel4 dummy fou ip_tunnel nft_masq nft_chain_nat nf_nat wireguard nft_ct curve25519_x86_64 libcurve25519_generic nf_conntrack libchacha20poly1305 nf_defrag_ipv6 nf_defrag_ipv4 nft_objref chacha_x86_64 nft_counter nf_tables nfnetlink poly1305_x86_64 ip6_udp_tunnel udp_tunnel libchacha crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper mousedev psmouse button ena ptp pps_core crc32c_intel
CR2: 0000000000000008
Fixes: d92283e338f6 ("fou: change to use UDP socket GRO")
Reported-by: Alphonse Kurian <alkurian@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240902173927.62706-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bareudp devices update their stats concurrently.
Therefore they need proper atomic increments.
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/04b7b9d0b480158eb3ab4366ec80aa2ab7e41fcb.1725031794.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull bcachefs fixes from Kent Overstreet:
- Fix a typo in the rebalance accounting changes
- BCH_SB_MEMBER_INVALID: small on disk format feature which will be
needed for full erasure coding support; this is only the minimum so
that 6.11 can handle future versions without barfing.
* tag 'bcachefs-2024-09-04' of git://evilpiepirate.org/bcachefs:
bcachefs: BCH_SB_MEMBER_INVALID
bcachefs: fix rebalance accounting
|
|
Jeongjun Park says:
====================
bpf: fix incorrect name check pass logic in btf_name_valid_section
This patch was written to fix an issue where btf_name_valid_section() would
not properly check names with certain conditions and would throw an OOB vuln.
And selftest was added to verify this patch.
====================
Link: https://lore.kernel.org/r/20240831054525.364353-1-aha310510@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add selftest for cases where btf_name_valid_section() does not properly
check for certain types of names.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20240831054742.364585-1-aha310510@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
When it needs to get a value within a certain interval, using clamp()
makes the code easier to understand than min(max()).
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240831012803.3950100-4-lizetao1@huawei.com
|
|
In nvkm_device_tegra_probe_iommu(), a paging domain is allocated for @dev
and attached to it on success. Use iommu_paging_domain_alloc() to make it
explicit.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902014700.66095-2-baolu.lu@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A number of small fixes for the late cycle:
- Two more build fixes on 32-bit archs
- Fixed a segfault during perf test
- Fixed spinlock/rwlock accounting bug in perf lock contention"
* tag 'perf-tools-fixes-for-v6.11-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf daemon: Fix the build on more 32-bit architectures
perf python: include "util/sample.h"
perf lock contention: Fix spinlock and rwlock accounting
perf test pmu: Set uninitialized PMU alias to null
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- hp-wmi-sensors: Check if WMI event data exists before accessing it
- ltc2991: fix register bits defines
* tag 'hwmon-for-v6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (hp-wmi-sensors) Check if WMI event data exists
hwmon: ltc2991: fix register bits defines
|
|
If the length of the name string is 1 and the value of name[0] is NULL
byte, an OOB vulnerability occurs in btf_name_valid_section() and the
return value is true, so the invalid name passes the check.
To solve this, you need to check if the first position is NULL byte and
if the first character is printable.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Fixes: bd70a8fb7ca4 ("bpf: Allow all printable characters in BTF DATASEC names")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20240831054702.364455-1-aha310510@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- followup fix for direct io and fsync under some conditions, reported
by QEMU users
- fix a potential leak when disabling quotas while some extent tracking
work can still happen
- in zoned mode handle unexpected change of zone write pointer in
RAID1-like block groups, turn the zones to read-only
* tag 'for-6.11-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix race between direct IO write and fsync when using same fd
btrfs: zoned: handle broken write pointer on zones
btrfs: qgroup: don't use extent changeset when not needed
|
|
Pull smb server fixes from Steve French:
- Fix crash in session setup
- Fix locking bug
- Improve access bounds checking
* tag 'v6.11-rc6-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Unlock on in ksmbd_tcp_set_interfaces()
ksmbd: unset the binding mark of a reused connection
smb: Annotate struct xattr_smb_acl with __counted_by()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"Two netfs fixes for this merge window:
- Ensure that fscache_cookie_lru_time is deleted when the fscache
module is removed to prevent UAF
- Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
Before it used truncate_inode_pages_partial() which causes
copy_file_range() to fail on cifs"
* tag 'vfs-6.11-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fscache: delete fscache_cookie_lru_timer when fscache exits to avoid UAF
mm: Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
|
|
Fix circular locking dependency on runtime suspend.
<4> [74.952215] ======================================================
<4> [74.952217] WARNING: possible circular locking dependency detected
<4> [74.952219] 6.10.0-rc7-xe #1 Not tainted
<4> [74.952221] ------------------------------------------------------
<4> [74.952223] kworker/7:1/82 is trying to acquire lock:
<4> [74.952226] ffff888120548488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_modeset_lock_all+0x40/0x1e0 [drm]
<4> [74.952260]
but task is already holding lock:
<4> [74.952262] ffffffffa0ae59c0 (xe_pm_runtime_lockdep_map){+.+.}-{0:0}, at: xe_pm_runtime_suspend+0x2f/0x340 [xe]
<4> [74.952322]
which lock already depends on the new lock.
The commit 'b1d90a86 ("drm/xe: Use the encoder suspend helper also used
by the i915 driver")' didn't do anything wrong. It actually fixed a
critical bug, because the encoder_suspend was never getting actually
called because it was returning if (has_display(xe)) instead of
if (!has_display(xe)). However, this ended up introducing the encoder
suspend calls in the runtime routines as well, causing the circular
locking dependency.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2304
Fixes: b1d90a862c89 ("drm/xe: Use the encoder suspend helper also used by the i915 driver")
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8da19441d0a02b53e362df81843bb20db3a8006a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Enable/Disable user access only during system suspend/resume.
This should not happen during runtime s/r
v2: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-2-vinod.govindapillai@intel.com
(cherry picked from commit a64e7e5b05e014dad9ae5858c9644d61400ec6ef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Suspend fbdev sooner, and disable user access before suspending to
prevent some races. I've noticed this when comparing xe suspend to
i915's.
Matches the following commits from i915:
24b412b1bfeb ("drm/i915: Disable intel HPD poll after DRM poll init/enable")
1ef28d86bea9 ("drm/i915: Suspend the framebuffer console earlier during system suspend")
bd738d859e71 ("drm/i915: Prevent modesets during driver init/shutdown")
Thanks to Imre for pointing me to those commits.
Driver shutdown is currently missing, but I have some idea how to
implement it next.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806105044.596842-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Maarten Lankhorst,,, <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 492be2a070f023c66aaef6ebd664567fda28c2a6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Ole reported that event->mmap_mutex is strictly insufficient to
serialize the AUX buffer, add a per RB mutex to fully serialize it.
Note that in the lock order comment the perf_event::mmap_mutex order
was already wrong, that is, it nesting under mmap_lock is not new with
this patch.
Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams")
Reported-by: Ole <ole@binarygecko.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull ARM fix from Russell King:
- Fix a build issue with older binutils with LD dead code elimination
disabled
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9414/1: Fix build issue with LD_DEAD_CODE_DATA_ELIMINATION
|
|
Fixes this missed case:
xe 0000:00:02.0: [drm] Missing outer runtime PM protection
WARNING: CPU: 99 PID: 1455 at drivers/gpu/drm/xe/xe_pm.c:564 xe_pm_runtime_get_noresume+0x48/0x60 [xe]
Call Trace:
<TASK>
? show_regs+0x67/0x70
? __warn+0x94/0x1b0
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
? report_bug+0x1b7/0x1d0
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
xe_device_declare_wedged+0x91/0x280 [xe]
gt_reset_worker+0xa2/0x250 [xe]
v2: Also move get and get the right Fixes tag (Himal, Brost)
Fixes: fb74b205cdd2 ("drm/xe: Introduce a simple wedged state")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit bc947d9a8c3ebd207e52c0e35cfc88f3e1abe54f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fix from Helge Deller:
- Fix boot issue where boot memory is marked read-only too early
* tag 'parisc-for-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Delay write-protection until mark_rodata_ro() call
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes, 15 of which are cc:stable.
Mostly MM, no identifiable theme. And a few nilfs2 fixups"
* tag 'mm-hotfixes-stable-2024-09-03-20-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
alloc_tag: fix allocation tag reporting when CONFIG_MODULES=n
mm: vmalloc: optimize vmap_lazy_nr arithmetic when purging each vmap_area
mailmap: update entry for Jan Kuliga
codetag: debug: mark codetags for poisoned page as empty
mm/memcontrol: respect zswap.writeback setting from parent cg too
scripts: fix gfp-translate after ___GFP_*_BITS conversion to an enum
Revert "mm: skip CMA pages when they are not available"
maple_tree: remove rcu_read_lock() from mt_validate()
kexec_file: fix elfcorehdr digest exclusion when CONFIG_CRASH_HOTPLUG=y
mm/slub: add check for s->flags in the alloc_tagging_slab_free_hook
nilfs2: fix state management in error path of log writing function
nilfs2: fix missing cleanup on rollforward recovery error
nilfs2: protect references to superblock parameters exposed in sysfs
userfaultfd: don't BUG_ON() if khugepaged yanks our page table
userfaultfd: fix checks for huge PMDs
mm: vmalloc: ensure vmap_block is initialised before adding to queue
selftests: mm: fix build errors on armhf
|
|
As of today, KVM notes a quiescent state only in guest entry, which is good
as it avoids the guest being interrupted for current RCU operations.
While the guest vcpu runs, it can be interrupted by a timer IRQ that will
check for any RCU operations waiting for this CPU. In case there are any of
such, it invokes rcu_core() in order to sched-out the current thread and
note a quiescent state.
This occasional schedule work will introduce tens of microsseconds of
latency, which is really bad for vcpus running latency-sensitive
applications, such as real-time workloads.
So, note a quiescent state in guest exit, so the interrupted guests is able
to deal with any pending RCU operations before being required to invoke
rcu_core(), and thus avoid the overhead of related scheduler work.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240511020557.1198200-1-leobras@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is a build issue with LD segmentation fault, while
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled, as bellow.
scripts/link-vmlinux.sh: line 49: 3796 Segmentation fault
(core dumped) ${ld} ${ldflags} -o ${output} ${wl}--whole-archive
${objs} ${wl}--no-whole-archive ${wl}--start-group
${libs} ${wl}--end-group ${kallsymso} ${btf_vmlinux_bin_o} ${ldlibs}
The error occurs in older versions of the GNU ld with version earlier
than 2.36. It makes most sense to have a minimum LD version as
a dependency for HAVE_LD_DEAD_CODE_DATA_ELIMINATION and eliminate
the impact of ".reloc .text, R_ARM_NONE, ." when
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled.
Fixes: ed0f94102251 ("ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION")
Reported-by: Harith George <mail2hgg@gmail.com>
Tested-by: Harith George <mail2hgg@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://lore.kernel.org/all/14e9aefb-88d1-4eee-8288-ef15d4a9b059@gmail.com/
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
bio_integrity_add_page restricts the size of the integrity metadata to
queue_max_hw_sectors(q). This restriction is not needed because oversized
bios are split automatically. This restriction causes problems with
dm-integrity 'inline' mode - if we send a large bio to dm-integrity and
the bio's metadata are larger than queue_max_hw_sectors(q),
bio_integrity_add_page fails and the bio is ended with BLK_STS_RESOURCE
error.
An example that triggers it:
dd: error writing '/dev/mapper/in2': Cannot allocate memory
1+0 records in
0+0 records out
0 bytes copied, 0.00169291 s, 0.0 kB/s
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fb0987682c62 ("dm-integrity: introduce the Inline mode")
Fixes: 0ece1d649b6d ("bio-integrity: create multi-page bvecs in bio_integrity_add_page()")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/e41b3b8e-16c2-70cb-97cb-881234bb200d@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the
first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers
WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference
issue.
Fix it by adding the check in ublk_ctrl_start_recovery() and return
immediately in case of zero 'ub->nr_queues_ready'.
BUG: kernel NULL pointer dereference, address: 0000000000000028
RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x75/0x170
? exc_page_fault+0x64/0x140
? asm_exc_page_fault+0x22/0x30
? ublk_ctrl_start_recovery.constprop.0+0x82/0x180
ublk_ctrl_uring_cmd+0x4f7/0x6c0
? pick_next_task_idle+0x26/0x40
io_uring_cmd+0x9a/0x1b0
io_issue_sqe+0x193/0x3f0
io_wq_submit_work+0x9b/0x390
io_worker_handle_work+0x165/0x360
io_wq_worker+0xcb/0x2f0
? finish_task_switch.isra.0+0x203/0x290
? finish_task_switch.isra.0+0x203/0x290
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: c732a852b419 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-and-tested-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/all/CAGVVp+UvLiS+bhNXV-h2icwX1dyybbYHeQUuH7RYqUvMQf6N3w@mail.gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20240904031348.4139545-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The mute LED on this HP laptop uses ALC236 and requires a quirk to function. This patch enables the existing quirk for the device.
Signed-off-by: Maximilien Perreault <maximilienperreault@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240904031013.21220-1-maximilienperreault@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute led is controlled by ALC245. This patch enables the already
existing quirk for this device.
Signed-off-by: Adam Queler <queler+k@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903202419.31433-1-queler+k@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently napi_disable() gets called during rxq and txq cleanup,
even before napi is enabled and hrtimer is initialized. It causes
kernel panic.
? page_fault_oops+0x136/0x2b0
? page_counter_cancel+0x2e/0x80
? do_user_addr_fault+0x2f2/0x640
? refill_obj_stock+0xc4/0x110
? exc_page_fault+0x71/0x160
? asm_exc_page_fault+0x27/0x30
? __mmdrop+0x10/0x180
? __mmdrop+0xec/0x180
? hrtimer_active+0xd/0x50
hrtimer_try_to_cancel+0x2c/0xf0
hrtimer_cancel+0x15/0x30
napi_disable+0x65/0x90
mana_destroy_rxq+0x4c/0x2f0
mana_create_rxq.isra.0+0x56c/0x6d0
? mana_uncfg_vport+0x50/0x50
mana_alloc_queues+0x21b/0x320
? skb_dequeue+0x5f/0x80
Cc: stable@vger.kernel.org
Fixes: e1b5683ff62e ("net: mana: Move NAPI from EQ to CQ")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ARCH=arm build fails with:
CC [M] drivers/gpu/drm/bridge/ti-tdp158.o
../drivers/gpu/drm/bridge/ti-tdp158.c: In function ‘tdp158_enable’:
../drivers/gpu/drm/bridge/ti-tdp158.c:31:9: error: implicit declaration of function ‘gpiod_set_value_cansleep’ [-Werror=implicit-function-declaration]
31 | gpiod_set_value_cansleep(tdp158->enable, 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/bridge/ti-tdp158.c: In function ‘tdp158_probe’:
../drivers/gpu/drm/bridge/ti-tdp158.c:80:26: error: implicit declaration of function ‘devm_gpiod_get_optional’; did you mean ‘devm_regulator_get_optional’? [-Werror=implicit-function-declaration]
80 | tdp158->enable = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
| ^~~~~~~~~~~~~~~~~~~~~~~
| devm_regulator_get_optional
../drivers/gpu/drm/bridge/ti-tdp158.c:80:65: error: ‘GPIOD_OUT_LOW’ undeclared (first use in this function)
80 | tdp158->enable = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
| ^~~~~~~~~~~~~
../drivers/gpu/drm/bridge/ti-tdp158.c:80:65: note: each undeclared identifier is reported only once for each function it appears in
Add the proper gpio consumer #include to fix this, and juggle the
include order to be a bit more pleasant on the eye while at it.
Fixes: a15710027afb ("drm/bridge: add support for TI TDP158")
Cc: Marc Gonzalez <mgonzalez@freebox.fr>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904085206.3331553-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Clang build with CONFIG_DRM_DEBUG_MM=n, CONFIG_WERROR=y, and W=1 leads to:
CC [M] drivers/gpu/drm/drm_mm.o
../drivers/gpu/drm/drm_mm.c:614:20: error: function 'drm_mm_node_scanned_block' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static inline bool drm_mm_node_scanned_block(const struct drm_mm_node *node)
^
Fix this by annotating drm_mm_node_scanned_block() with __maybe_unused.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903173437.3212437-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The INTERVAL_TREE_DEFINE() uncoditionally provides a bunch of helper
functions which in some cases may be not used. This, in particular,
prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
.../drm/drm_mm.c:152:1: error: unused function 'drm_mm_interval_tree_insert' [-Werror,-Wunused-function]
152 | INTERVAL_TREE_DEFINE(struct drm_mm_node, rb,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
153 | u64, __subtree_last,
| ~~~~~~~~~~~~~~~~~~~~
154 | START, LAST, static inline, drm_mm_interval_tree)
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by marking drm_mm_interval_tree*() functions with __maybe_unused.
See also commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: 202b52b7fbf7 ("drm: Track drm_mm nodes with an interval tree")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829154640.1120050-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prefer the struct drm_edid based functions for reading the EDID and
updating the connector.
The functional change is that the CEC physical address gets invalidated
when the EDID could not be read.
v2:
- display info usage was split to a separate patch
- check drm_edid_connector_update() return value
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be15dce66a5373a7aed797a4ef63b0ba90b231e9.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
xe_bo_move() might be called in the TTM swapout path from validation
by another TTM device. If so, we are not likely to have a RPM
reference. So iff xe_pm_runtime_get() is safe to call from reclaim,
use it instead of xe_pm_runtime_get_noresume().
Strictly this is currently needed only if handle_system_ccs is true,
but use xe_pm_runtime_get() if possible anyway to increase test
coverage.
At the same time warn if handle_system_ccs is true and we can't
call xe_pm_runtime_get() from reclaim context. This will likely trip
if someone tries to enable SRIOV on LNL, without fixing Xe SRIOV
runtime resume / suspend.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903094232.166342-1-thomas.hellstrom@linux.intel.com
|
|
Look up display dimensions from display_info instead of the EDID
directly. This will be helpful for the follow-up work.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8a6fd6de1853dbc337c5c26c65268604d3e91fe2.1724348429.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Create a sentinal value for "invalid device".
This is needed for removing devices that have stripes on them (force
removing, without evacuating); we need a sentinal value for the stripe
pointers to the device being removed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we trigger the bus rescan from sysfs, we'll try to lock the PCI rescan
mutex recursively and deadlock - the platform device will be populated and
probed on the same thread that handles the sysfs write.
Add a workqueue to the pwrctl code on which we schedule the rescan for
controlled PCI devices. While at it: add a new interface for initializing
the pwrctl context where we'd now assign the parent device address and
initialize the workqueue.
Link: https://lore.kernel.org/r/20240823093323.33450-3-brgl@bgdev.pl
Fixes: 4565d2652a37 ("PCI/pwrctl: Add PCI power control core code")
Reported-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
of_platform_depopulate() doesn't play nicely with reused OF nodes - it
ignores the ones that are not marked explicitly as populated and it may
happen that the PCI device goes away before the platform device in which
case the PCI core clears the OF_POPULATED bit.
Unconditionally unregister the platform devices for child nodes when
stopping the PCI device.
Link: https://lore.kernel.org/r/20240823093323.33450-2-brgl@bgdev.pl
Fixes: 8fb18619d910 ("PCI/pwrctl: Create platform devices for child OF nodes of the port node")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The rk3576 SoC has an ARM Mali G52 MC3 GPU, that is compatible with
arm,mali-bifrost.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240903152308.13565-6-detlev.casanova@collabora.com
|
|
Move away from corporate infrastructure for upstream work. Also update
mailmap.
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20240903200956.68231-1-a.hindborg@kernel.org
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
A recent change started parking the RCG at an always on parent during
registration, something which specifically breaks handover from an early
serial console.
Quoting Stephen Boyd who fixed this issue for SM8550 [1]:
The QUPs aren't shared in a way that requires parking the RCG at
an always on parent in case some other entity turns on the clk.
The hardware is capable of setting a new frequency itself with
the DFS mode, so parking is unnecessary. Furthermore, there
aren't any GDSCs for these devices, so there isn't a possibility
of the GDSC turning on the clks for housekeeping purposes.
This wasn't a problem to mark these clks shared until we started
parking shared RCGs at clk registration time in commit
01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration").
Parking at init is actually harmful to the UART when earlycon is
used. If the device is pumping out data while the frequency
changes you'll see garbage on the serial console until the
driver can probe and actually set a proper frequency.
Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration")
Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Link: https://lore.kernel.org/all/20240819233628.2074654-2-swboyd@chromium.org/ [1]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240902070830.8535-1-johan+linaro@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix EIO if splice and page stealing are enabled on the fuse device
- Disable problematic combination of passthrough and writeback-cache
- Other bug fixes found by code review
* tag 'fuse-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: disable the combination of passthrough and writeback cache
fuse: update stats for pages in dropped aux writeback list
fuse: clear PG_uptodate when using a stolen page
fuse: fix memory leak in fuse_create_open
fuse: check aborted connection before adding requests to pending list for resending
fuse: use unsigned type for getxattr/listxattr size truncation
|
|
There's a potential race when `cgroup_bpf_enabled(CGROUP_GETSOCKOPT)` is
false during the execution of `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN`, but
becomes true when `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is called.
This inconsistency can lead to `BPF_CGROUP_RUN_PROG_GETSOCKOPT` receiving
an "-EFAULT" from `__cgroup_bpf_run_filter_getsockopt(max_optlen=0)`.
Scenario shown as below:
`process A` `process B`
----------- ------------
BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN
enable CGROUP_GETSOCKOPT
BPF_CGROUP_RUN_PROG_GETSOCKOPT (-EFAULT)
To resolve this, remove the `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN` macro and
directly uses `copy_from_sockptr` to ensure that `max_optlen` is always
set before `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is invoked.
Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Co-developed-by: Yanghui Li <yanghui.li@mediatek.com>
Signed-off-by: Yanghui Li <yanghui.li@mediatek.com>
Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20240830082518.23243-1-Tze-nan.Wu@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When CONFIG_DQL is not enabled, dql_group should be treated as a dead
declaration. However, its current extern declaration assumes the linker
will ignore it, which is generally true across most compiler and
architecture combinations.
But in certain cases, the linker still attempts to resolve the extern
struct, even when the associated code is dead, resulting in a linking
error. For instance the following error in loongarch64:
>> loongarch64-linux-ld: net-sysfs.c:(.text+0x589c): undefined reference to `dql_group'
Modify the declaration of the dead object to be an empty declaration
instead of an extern. This change will prevent the linker from
attempting to resolve an undefined reference.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409012047.eCaOdfQJ-lkp@intel.com/
Fixes: 74293ea1c4db ("net: sysfs: Do not create sysfs for non BQL device")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20240902101734.3260455-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If netem_dequeue() enqueues packet to inner qdisc and that qdisc
returns __NET_XMIT_STOLEN. The packet is dropped but
qdisc_tree_reduce_backlog() is not called to update the parent's
q.qlen, leading to the similar use-after-free as Commit
e04991a48dbaf382 ("netem: fix return value if duplicate enqueue
fails")
Commands to trigger KASAN UaF:
ip link add type dummy
ip link set lo up
ip link set dummy0 up
tc qdisc add dev lo parent root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2: handle 3: drr
tc filter add dev lo parent 3: basic classid 3:1 action mirred egress
redirect dev dummy0
tc class add dev lo classid 3:1 drr
ping -c1 -W0.01 localhost # Trigger bug
tc class del dev lo classid 1:1
tc class add dev lo classid 1:1 drr
ping -c1 -W0.01 localhost # UaF
Fixes: 50612537e9ab ("netem: fix classful handling")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/20240901182438.4992-1-stephen@networkplumber.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver generates a random MAC once on load
and uses it over and over, including on two devices
needing a random MAC at the same time.
Jakub suggested revamping the driver to the modern
API for setting a random MAC rather than fixing
the old stuff.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is part of an effort [1] to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.
[1] https://lore.kernel.org/netdev/20240821-net-mnt-v2-0-59a5af38e69d@kernel.org/
It seems that net-cw1200.h is part of the CW1200 WLAN driver and
this it is appropriate to add it to the section for that driver.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240902-wifi-mnt-v2-1-f5ad1f36e993@kernel.org
|