| Age | Commit message (Collapse) | Author |
|---|
|
Commit 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the
resume phase") overlooked the case in which the parent of a device with
DPM_FLAG_SMART_SUSPEND set did not use that flag and could be runtime-
suspended before a transition into a system-wide sleep state. In that
case, if the child is resumed during the subsequent transition from
that state into the working state, its runtime PM status will be set to
RPM_ACTIVE, but the runtime PM status of the parent will not be updated
accordingly, even though the parent will be resumed too, because of the
dev_pm_skip_suspend() check in device_resume_noirq().
Address this problem by tracking the need to set the runtime PM status
to RPM_ACTIVE during system-wide resume transitions for devices with
DPM_FLAG_SMART_SUSPEND set and all of the devices depended on by them.
Fixes: 6e176bf8d461 ("PM: sleep: core: Do not skip callbacks in the resume phase")
Closes: https://lore.kernel.org/linux-pm/Z30p2Etwf3F2AUvD@hovoldconsulting.com/
Reported-by: Johan Hovold <johan@kernel.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/12619233.O9o76ZdvQC@rjwysocki.net
|
|
The Airoha cpufreq depends on OF and must be marked as such. With the
kernel compiled without OF support, we get following warning:
drivers/cpufreq/airoha-cpufreq.c:109:34: warning: 'airoha_cpufreq_match_list' defined but not used [-Wunused-const-variable=]
109 | static const struct of_device_id airoha_cpufreq_match_list[] __initconst = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501251941.0fXlcd1D-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/455e18c947bd9529701a2f1c796f0f934d1354d7.1738050679.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The pcf2127 encodes BSM, BLD and power fail detection in the same set of
bits so it is necessary to do some calculation when changing BSM to keep
the rest of the configuration as-is. However, when BSM is disabled, there
is no configuration with BLD enabled so this will be lost when coming back
to a mode with BSM enabled.
Link: https://lore.kernel.org/r/20250127162728.86234-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix a potential early boot crash in SEV-SNP guests, where certain
config and build environment combinations can generate absolute
references to symbols in the early boot code"
* tag 'x86-urgent-2025-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Disable jump tables in SEV startup code
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Enable using direct IO with localio
- Added localio related tracepoints
Bugfixes:
- Sunrpc fixes for working with a very large cl_tasks list
- Fix a possible buffer overflow in nfs_sysfs_link_rpc_client()
- Fixes for handling reconnections with localio
- Fix how the NFS_FSCACHE kconfig option interacts with NETFS_SUPPORT
- Fix COPY_NOTIFY xdr_buf size calculations
- pNFS/Flexfiles fix for retrying requesting a layout segment for
reads
- Sunrpc fix for retrying on EKEYEXPIRED error when the TGT is
expired
Cleanups:
- Various other nfs & nfsd localio cleanups
- Prepratory patches for async copy improvements that are under
development
- Make OFFLOAD_CANCEL, LAYOUTSTATS, and LAYOUTERR moveable to other
xprts
- Add netns inum and srcaddr to debugfs rpc_xprt info"
* tag 'nfs-for-6.14-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (28 commits)
SUNRPC: do not retry on EKEYEXPIRED when user TGT ticket expired
sunrpc: add netns inum and srcaddr to debugfs rpc_xprt info
pnfs/flexfiles: retry getting layout segment for reads
NFSv4.2: make LAYOUTSTATS and LAYOUTERROR MOVEABLE
NFSv4.2: mark OFFLOAD_CANCEL MOVEABLE
NFSv4.2: fix COPY_NOTIFY xdr buf size calculation
NFS: Rename struct nfs4_offloadcancel_data
NFS: Fix typo in OFFLOAD_CANCEL comment
NFS: CB_OFFLOAD can return NFS4ERR_DELAY
nfs: Make NFS_FSCACHE select NETFS_SUPPORT instead of depending on it
nfs: fix incorrect error handling in LOCALIO
nfs: probe for LOCALIO when v3 client reconnects to server
nfs: probe for LOCALIO when v4 client reconnects to server
nfs/localio: remove redundant code and simplify LOCALIO enablement
nfs_common: add nfs_localio trace events
nfs_common: track all open nfsd_files per LOCALIO nfs_client
nfs_common: rename nfslocalio nfs_uuid_lock to nfs_uuids_lock
nfsd: nfsd_file_acquire_local no longer returns GC'd nfsd_file
nfsd: rename nfsd_serv_ prefixed methods and variables with nfsd_net_
nfsd: update percpu_ref to manage references on nfsd_net
...
|
|
Pull vfio updates from Alex Williamson:
- Extend vfio-pci 8-byte read/write support to include archs defining
CONFIG_GENERIC_IOMAP, such as x86, and remove now extraneous #ifdefs
around 64-bit accessors (Ramesh Thomas)
- Update vfio-pci shadow ROM handling and allow cached ROM from setup
data to be exposed as a functional ROM BAR region when available
(Yunxiang Li)
- Update nvgrace-gpu vfio-pci variant driver for new Grace Blackwell
hardware, conditionalizing the uncached BAR workaround for previous
generation hardware based on the presence of a flag in a new DVSEC
capability, and include a delay during probe for link training to
complete, a new requirement for GB devices (Ankit Agrawal)
* tag 'vfio-v6.14-rc1' of https://github.com/awilliam/linux-vfio:
vfio/nvgrace-gpu: Add GB200 SKU to the devid table
vfio/nvgrace-gpu: Check the HBM training and C2C link status
vfio/nvgrace-gpu: Expose the blackwell device PF BAR1 to the VM
vfio/nvgrace-gpu: Read dvsec register to determine need for uncached resmem
vfio/platform: check the bounds of read/write syscalls
vfio/pci: Expose setup ROM at ROM bar when needed
vfio/pci: Remove shadow ROM specific code paths
vfio/pci: Remove #ifdef iowrite64 and #ifdef ioread64
vfio/pci: Enable iowrite64 and ioread64 for vfio pci
|
|
Instead of freeing iovecs in case of IO_URING_F_UNLOCKED in
io_rw_recycle(), leave it be and rely on the core io_uring code to
call io_readv_writev_cleanup() later. This way the iovec will get
recycled and we can clean up io_rw_recycle() and kill
io_rw_iovec_free().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/14f83b112eb40078bea18e15d77a4f99fc981a44.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Test setups (with KASAN) will avoid !KASAN sections, and so it's not
testing paths that would be exercised otherwise. That's bad as to be
sure that your code works you now have to specifically test both KASAN
and !KASAN configs.
Remove !CONFIG_KASAN guards from io_netmsg_cache_free() and
io_rw_cache_free(). The free functions should always be getting valid
entries, and even though for KASAN iovecs should already be cleared,
that's better than skipping the chunks completely.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/d6078a51c7137a243f9d00849bc3daa660873209.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Extract a helper out of io_send() for provided buffer selection to
improve readability as it has grown to take too many lines.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/26a769cdabd61af7f40c5d88a22469c5ad071796.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Put msg->msg_iov into a local variable in io_msg_copy_hdr(), it reads
better and clearly shows the used types.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/6a5d4f7a96b10e571d6128be010166b3aaf7afd5.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_net_vec_assign() can only return 0 and it doesn't make sense for it
to fail, so make it return void.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/7c1a2390c99e17d3ae4e8562063e572d3cdeb164.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Avoid inlining all and everything from alloc_cache.h and move cold bits
into a new file.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/06984c6cd58e703f7cfae5ab3067912f9f635a06.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use IS_ENABLED in io_alloc_cache_kasan() so at least it gets compile
tested without KASAN.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/35e53e83f6e16478dca0028a64a6cc905dc764d3.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
alloc_cache.h uses types it doesn't declare and thus depends on the
order in which it's included. Make it self contained and pull all needed
definitions.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/39569f3d5b250b4fe78bb609d57f67d3736ebcc4.1738087204.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When retpolines and IBT are both disabled, the compiler is free to use
jump tables to optimize switch instructions. However, these are emitted
by Clang as absolute references into .rodata:
jmp *-0x7dfffe90(,%r9,8)
R_X86_64_32S .rodata+0x170
Given that this code will execute before that address in .rodata has even
been mapped, it is guaranteed to crash a SEV-SNP guest in a way that is
difficult to diagnose.
So disable jump tables when building this code. It would be better if we
could attach this annotation to the __head macro but this appears to be
impossible.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250127114334.1045857-6-ardb+git@google.com
|
|
Sphinx reports unreferenced footnote warning on "Video issues with S3
resume" doc:
Documentation/power/video.rst:213: WARNING: Footnote [#] is not referenced. [ref.footnote]
Fix the warning by separating footnote reference for Toshiba Satellite
P10-554 by a space.
Fixes: 151f4e2bdc7a ("docs: power: convert docs to ReST and rename to *.rst")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250122170335.148a23b0@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250122143456.68867-4-bagasdotme@gmail.com
|
|
Sphinx reports unreferenced footnote warning pointing to ubd-control
message by Stefan Hajnoczi:
Documentation/block/ublk.rst:336: WARNING: Footnote [#] is not referenced. [ref.footnote]
Drop the footnote to squash above warning.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Fixes: 4093cb5a0634 ("ublk_drv: add mechanism for supporting unprivileged ublk device")
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250122143456.68867-3-bagasdotme@gmail.com
|
|
This restores the original behavior that gets min/max freq from EDID and
only set DP/eDP connector as freesync capable if "sink device is capable
of rendering incoming video stream without MSA timing parameters", i.e.,
`allow_invalid_MSA_timing_params` is true. The condition was mistakenly
removed by 0159f88a99c9 ("drm/amd/display: remove redundant freesync
parser for DP").
CC: Mario Limonciello <mario.limonciello@amd.com>
CC: Alex Hung <alex.hung@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3915
Fixes: 0159f88a99c9 ("drm/amd/display: remove redundant freesync parser for DP")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The following page fault was observed duringthe KFD process release.
In this particular error case, the HIP test (./MemcpyPerformance -h)
does not require the queue. As a result, the process_context_addr was
not assigned when the KFD process was released, ultimately leading to
this page fault during the execution of the function
kfd_process_dequeue_from_all_devices().
[345962.294891] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:153 vmid:0 pasid:0)
[345962.295333] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10
[345962.295775] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00000B33
[345962.296097] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5)
[345962.296394] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x1
[345962.296633] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x1
[345962.296876] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x3
[345962.297135] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x1
[345962.297377] amdgpu 0000:03:00.0: amdgpu: RW: 0x0
[345962.297682] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:169 vmid:0 pasid:0)
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
the offset address of mmCLK5_spll_field_8 was incorrect for dcn35
which causes SSC not to be enabled.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Lo-An Chen <lo-an.chen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Aldebaran doesn't support querying MM activity percentage. Keep the
field as 0xFFs to mark it as unsupported.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
change the config of cgcg on gfx12
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
The purpose of halt_if_hws_hang is to preserve GPU state for driver
debugging when queue preemption fails. Issuing per-queue reset may
kill wavefronts which caused the preemption failure.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull stop_machine update from Paul McKenney:
"Move a misplaced call to rcu_momentary_eqs() from multi_cpu_stop() to
ensure that interrupts are disabled as required"
* tag 'stop-machine.2025.01.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
stop_machine: Fix rcu_momentary_eqs() call in multi_cpu_stop()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull CSD-lock update from Paul McKenney:
"Allow runtime modification of the csd_lock_timeout and
panic_on_ipistall module parameters"
* tag 'csd-lock.2025.01.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
locking/csd-lock: make CSD lock debug tunables writable in /sys
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fix from Masami Hiramatsu:
- Fix wrong format specifier: use '%u' for unsigned int
* tag 'bootconfig-fixes-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/bootconfig: Fix the wrong format specifier
|
|
Now that filename__read_int() returns -errno instead of -1 these
statements need to be updated otherwise error values will be used as
die IDs.
This appears as a -2 die ID when the platform doesn't export one:
$ perf stat --per-core -a -- true
S36-D-2-C0 1 9.45 msec cpu-clock
And the session topology test fails:
$ perf test -vvv topology
CPU 0, core 0, socket 36
CPU 1, core 1, socket 36
CPU 2, core 2, socket 36
CPU 3, core 3, socket 36
FAILED tests/topology.c:137 Cpu map - Die ID doesn't match
---- end(-1) ----
38: Session topology : FAILED!
Fixes: 05be17eed774 ("tool api fs: Correctly encode errno for read/write open failures")
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241218115552.912517-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the tty/serial driver set of changes for 6.14-rc1. Nothing
major in here, it was delayed a bit due to a regression found in
linux-next which has now been reverted and verified that it is fixed.
Other than the reverts, highlights include:
- 8250 work to get the nbcon mode working (partially reverted)
- altera_jtaguart minor fixes
- fsl_lpuart minor updates
- sh-sci driver minor updatesa
- other tiny driver updates and cleanups
All of these have been in linux-next for a while, and now with no
reports of problems (thanks to the reverts)"
* tag 'tty-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (44 commits)
Revert "serial: 8250: Switch to nbcon console"
Revert "serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()""
serial: sh-sci: Increment the runtime usage counter for the earlycon device
serial: sh-sci: Clean sci_ports[0] after at earlycon exit
serial: sh-sci: Do not probe the serial port if its slot in sci_ports[] is in use
serial: sh-sci: Move runtime PM enable to sci_probe_single()
serial: sh-sci: Drop __initdata macro for port_cfg
serial: kgdb_nmi: Remove unused knock code
tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN
tty: xilinx_uartps: split sysrq handling
serial: 8250: Revert "drop lockdep annotation from serial8250_clear_IER()"
serial: 8250: Switch to nbcon console
serial: 8250: Provide flag for IER toggling for RS485
serial: 8250: Use high-level writing function for FIFO
serial: 8250: Use frame time to determine timeout
serial: 8250: Adjust the timeout for FIFO mode
tty: atmel_serial: Use of_property_present() for non-boolean properties
serial: sc16is7xx: Add polling mode if no IRQ pin is available
dt-bindings: serial: sc16is7xx: Add description for polling mode
tty: serial: atmel: make it selectable for ARCH_LAN969X
...
|
|
The perf trace enum augmentation test specifically targets landlock_
add_rule syscall but IIUC it's an optional and can be opt-out by a
kernel config.
Currently trace_landlock() runs `perf test -w landlock` before the
actual testing to check the availability but it's not enough since the
workload always returns 0. Instead it could check if perf trace output
has 'landlock' string.
Fixes: d66763fed30f0bd8c ("perf test trace_btf_enum: Add regression test for the BTF augmentation of enums in 'perf trace'")
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Link: https://lore.kernel.org/r/20250128170629.1251574-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
libtraceevent parses and returns an array of argument fields, sometimes
larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr",
idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6
elements max, creating an out-of-bounds access. This runtime error is
found by UBsan. The error message:
$ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1
builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]'
#0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966
#1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110
#2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436
#3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897
#4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335
#5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502
#6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351
#7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404
#8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448
#9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556
#10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
#11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360
#12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6)
0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1
Fixes: 5e58fcfaf4c6 ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint")
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Link: https://lore.kernel.org/r/20250122025519.361873-1-howardchu95@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The auto_parser assumed sort() was stable, but the kernel's sort() uses
heapsort, which has never been stable. After commit 0e02ca29a563
("lib/sort: optimize heapsort with double-pop variation"), the order of
equal elements changed, causing the headset to fail to work.
Fix the issue by recording the original order of elements before
sorting and using it as a tiebreaker for equal elements in the
comparison function.
Fixes: b9030a005d58 ("ALSA: hda - Use standard sort function in hda_auto_parser.c")
Reported-by: Austrum <austrum.lab@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219158
Tested-by: Austrum <austrum.lab@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://patch.msgid.link/20250128165415.643223-1-visitorckw@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull KVM/arm64 updates from Will Deacon:
"New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the way
for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
arm64/sysreg: Get rid of TRFCR_ELx SysregFields
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
KVM: arm64: Fix FEAT_MTE in pKVM
Documentation: Update the behaviour of "kvm-arm.mode"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Migrate to the generic rule for built-in DTB
- Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
- Derive timer max_delta from PRCFG1's timer_bits
- Correct the cacheinfo sharing information
- Add pgprot_nx() implementation
- Add debugfs entries to switch SFB/TSO state
- Change the maximum number of watchpoints
- Some bug fixes and other small changes
* tag 'loongarch-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Extend the maximum number of watchpoints
LoongArch: Change 8 to 14 for LOONGARCH_MAX_{BRP,WRP}
LoongArch: Add debugfs entries to switch SFB/TSO state
LoongArch: Fix warnings during S3 suspend
LoongArch: Adjust SETUP_SLEEP and SETUP_WAKEUP
LoongArch: Refactor bug_handler() implementation
LoongArch: Add pgprot_nx() implementation
LoongArch: Correct the __switch_to() prototype in comments
LoongArch: Correct the cacheinfo sharing information
LoongArch: Derive timer max_delta from PRCFG1's timer_bits
LoongArch: Disable FIX_EARLYCON_MEM when ARCH_IOREMAP is enabled
LoongArch: Migrate to the generic rule for built-in DTB
|
|
With the switch to GENERIC_CPU_DEVICES an early call to the sclp subsystem
was added to smp_prepare_cpus(). This will usually succeed since the sclp
subsystem is implicitly initialized early enough if an sclp based console
is present.
If no such console is present the initialization happens with an
arch_initcall(); in such cases calls to the sclp subsystem will fail.
For CPU detection this means that the fallback sigp loop will be used
permanently to detect CPUs instead of the preferred READ_CPU_INFO sclp
request.
Fix this by adding an explicit early sclp_init() call via
arch_cpu_finalize_init().
Reported-by: Sheshu Ramanandan <sheshu.ramanandan@ibm.com>
Fixes: 4a39f12e753d ("s390/smp: Switch to GENERIC_CPU_DEVICES")
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Improve performance for reading /proc/interrupts
- Simplify irq code for sun4v
- Replace zero-length array with flexible array in struct for pci for
sparc64
* tag 'sparc-for-6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc/irq: Remove unneeded if check in sun4v_cookie_only_virqs()
sparc/irq: Use str_enabled_disabled() helper function
sparc: replace zero-length array with flexible-array member
sparc/irq: use seq_put_decimal_ull_width() for decimal values
|
|
Use '%u' instead of '%d' for unsigned int.
Link: https://lore.kernel.org/all/20241105011048.201629-1-luoyifan@cmss.chinamobile.com/
Fixes: 973780011106 ("tools/bootconfig: Suppress non-error messages")
Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Intel Clearwater Forest report PMT telemetry with GUID 0x14421519, which
can be used to obtain module c1e residency counter of type tcore clock.
Add early support for the counter by using heuristic that should work
for the Clearwater Forest platforms.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The in-kernel disassembler intentionally uses nun-null terminated
strings in order to keep the arrays which contain mnemonics as small
as possible. GCC 15 however warns about this:
./arch/s390/include/generated/asm/dis-defs.h:1662:71: error: initializer-string
for array of ‘char’ is too long [-Werror=unterminated-string-initialization]
1662 | [1261] = { .opfrag = 0xea, .format = INSTR_SS_L0RDRD, .name = "unpka" }, \
Get rid of this warning by using array initializers.
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
We do io_kbuf_recycle() when arming a poll but every iteration of a
multishot can grab more buffers, which is why we need to flush the kbuf
ring state before continuing with waiting.
Cc: stable@vger.kernel.org
Fixes: b3fdea6ecb55c ("io_uring: multishot recv")
Reported-by: Muhammad Ramdhan <ramdhan@starlabs.sg>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Reported-by: Jacob Soo <jacob.soo@starlabs.sg>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1bfc9990fe435f1fc6152ca9efeba5eb3e68339c.1738025570.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit 78eb4ea25cd5 ("sysctl: treewide:
constify the ctl_table argument of proc_handlers") constified all the
proc_handlers.
Created this by running an spatch followed by a sed command:
Spatch:
virtual patch
@
depends on !(file in "net")
disable optional_qualifier
@
identifier table_name != {
watchdog_hardlockup_sysctl,
iwcm_ctl_table,
ucma_ctl_table,
memory_allocation_profiling_sysctls,
loadpin_sysctl_table
};
@@
+ const
struct ctl_table table_name [] = { ... };
sed:
sed --in-place \
-e "s/struct ctl_table .table = &uts_kern/const struct ctl_table *table = \&uts_kern/" \
kernel/utsname_sysctl.c
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> # for kernel/trace/
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Darrick J. Wong <djwong@kernel.org> # xfs
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
The referenced fix is incomplete. It correctly computes
bond_dev->gso_partial_features across slaves, but unfortunately
netdev_fix_features discards gso_partial_features from the feature set
if NETIF_F_GSO_PARTIAL isn't set in bond_dev->features.
This is visible with ethtool -k bond0 | grep esp:
tx-esp-segmentation: off [requested on]
esp-hw-offload: on
esp-tx-csum-hw-offload: on
This patch reworks the bonding GSO offload support by:
- making aggregating gso_partial_features across slaves similar to the
other feature sets (this part is a no-op).
- advertising the default partial gso features on empty bond devs, same
as with other feature sets (also a no-op).
- adding NETIF_F_GSO_PARTIAL to hw_enc_features filtered across slaves.
- adding NETIF_F_GSO_PARTIAL to features in bond_setup()
With all of these, 'ethtool -k bond0 | grep esp' now reports:
tx-esp-segmentation: on
esp-hw-offload: on
esp-tx-csum-hw-offload: on
Fixes: 4861333b4217 ("bonding: add ESP offload features when slaves support")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20250127104147.759658-1-cratiu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Kunihiko Hayashi says:
====================
Limit devicetree parameters to hardware capability
This series includes patches that checks the devicetree properties,
the number of MTL queues and FIFO size values, and if these specified
values exceed the value contained in hardware capabilities, limit to
the values from the capabilities. Do nothing if the capabilities don't
have any specified values.
And this sets hardware capability values if FIFO sizes are not specified
and removes redundant lines.
====================
Link: https://patch.msgid.link/20250127013820.2941044-1-hayashi.kunihiko@socionext.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When Tx/Rx FIFO size is not specified in advance, the driver checks if
the value is zero and sets the hardware capability value in functions
where that value is used.
Consolidate the check and settings into function stmmac_hw_init() and
remove redundant other statements.
If FIFO size is zero and the hardware capability also doesn't have upper
limit values, return with an error message.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Tx/Rx FIFO size is specified by the parameter "{tx,rx}-fifo-depth" from
stmmac_platform layer.
However, these values are constrained by upper limits determined by the
capabilities of each hardware feature. There is a risk that the upper
bits will be truncated due to the calculation, so it's appropriate to
limit them to the upper limit values and display a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: e7877f52fd4a ("stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The number of MTL queues to use is specified by the parameter
"snps,{tx,rx}-queues-to-use" from stmmac_platform layer.
However, the maximum numbers of queues are constrained by upper limits
determined by the capability of each hardware feature. It's appropriate
to limit the values not to exceed the upper limit values and display
a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: d976a525c371 ("net: stmmac: multiple queues dt configuration")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The sanity check that both source and destination are set when symmetric
RSS hash is requested is only relevant for ETHTOOL_SRXFH (rx-flow-hash),
it should not be performed on any other commands (e.g.
ETHTOOL_SRXCLSRLINS/ETHTOOL_SRXCLSRLDEL).
This resolves accessing uninitialized 'info.data' field, and fixes false
errors in rule insertion:
# ethtool --config-ntuple eth2 flow-type ip4 dst-ip 255.255.255.255 action -1 loc 0
rmgr: Cannot insert RX class rule: Invalid argument
Cannot insert classification rule
Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash")
Cc: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250126191845.316589-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Foster Snowhill says:
====================
usbnet: ipheth: prevent OoB reads of NDP16
iOS devices support two types of tethering over USB: regular, where the
internet connection is shared from the phone to the attached computer,
and reverse, where the internet connection is shared from the attached
computer to the phone.
The `ipheth` driver is responsible for regular tethering only. With this
tethering type, iOS devices support two encapsulation modes on RX:
legacy and NCM.
In "NCM mode", the iOS device encapsulates RX (phone->computer) traffic
in NCM Transfer Blocks (similarly to CDC NCM). However, unlike reverse
tethering, regular tethering is not compliant with the CDC NCM spec:
* Does not have the required CDC NCM descriptors
* TX (computer->phone) is not NCM-encapsulated at all
Thus `ipheth` implements a very limited subset of the spec with the sole
purpose of parsing RX URBs. This driver does not aim to be
a CDC NCM-compliant implementation and, in fact, can't be one because of
the points above.
For a complete spec-compliant CDC NCM implementation, there is already
the `cdc_ncm` driver. This driver is used for reverse tethering on iOS
devices. This patch series does not in any way change `cdc_ncm`.
In the first iteration of the NCM mode implementation in `ipheth`,
there were a few potential out of bounds reads when processing malformed
URBs received from a connected device:
* Only the start of NDP16 (wNdpIndex) was checked to fit in the URB
buffer.
* Datagram length check as part of DPEs could overflow.
* DPEs could be read past the end of NDP16 and even end of URB buffer
if a trailer DPE wasn't encountered.
The above is not expected to happen in normal device operation.
To address the above issues for iOS devices in NCM mode, rely on
and check for a specific fixed format of incoming URBs expected from
an iOS device:
* 12-byte NTH16
* 96-byte NDP16, allowing up to 22 DPEs (up to 21 datagrams + trailer)
On iOS, NDP16 directly follows NTH16, and its length is constant
regardless of the DPE count.
As the regular tethering implementation of iOS devices isn't compliant
with CDC NCM, it's not possible to use the `cdc_ncm` driver to handle
this functionality. Furthermore, while the logic required to properly
parse URBs with NCM-encapsulated frames is already part of said driver,
I haven't found a nice way to reuse the existing code without messing
with the `cdc_ncm` driver itself.
I didn't want to reimplement more of the spec than I absolutely had to,
because that work had already been done in `cdc_ncm`. Instead, to limit
the scope, I chose to rely on the specific URB format of iOS devices
that hasn't changed since the NCM mode was introduced there.
I tested each individual patch in the v5 series with iPhone 15 Pro Max,
iOS 18.2.1: compiled cleanly, ran iperf3 between phone and computer,
observed no errors in either kernel log or interface statistics.
v4 was Reviewed-by Jakub Kicinski <kuba@kernel.org>. Compared to v4,
v5 has no code changes. The two differences are:
* Patch "usbnet: ipheth: break up NCM header size computation"
moved later in the series, closer to a subsequent commit that makes
use of the change.
* In patch "usbnet: ipheth: refactor NCM datagram loop", removed
a stray paragraph in commit msg.
Above items are also noted in the changelogs of respective patches.
====================
Link: https://patch.msgid.link/20250125235409.3106594-1-forst@pen.gy
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Clarify that the "NCM" implementation in `ipheth` is very limited, as
iOS devices aren't compatible with the CDC NCM specification in regular
tethering mode.
For a standards-compliant implementation, one shall turn to
the `cdc_ncm` module.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix an out-of-bounds DPE read, limit the number of processed DPEs to
the amount that fits into the fixed-size NDP16 header.
Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
