| Age | Commit message (Collapse) | Author |
|---|
|
This capability will allow the user to know which KVM_GUESTDBG_* bits
are supported.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210401135451.1004564-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Injected interrupts/nmi should not block a pending exception,
but rather be either lost if nested hypervisor doesn't
intercept the pending exception (as in stock x86), or be delivered
in exitintinfo/IDT_VECTORING_INFO field, as a part of a VMexit
that corresponds to the pending exception.
The only reason for an exception to be blocked is when nested run
is pending (and that can't really happen currently
but still worth checking for).
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210401143817.1030695-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Message-Id: <20210401142514.1688199-1-yangyingliang@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
While KVM's MMU should be fully reset by loading of nested CR0/CR3/CR4
by KVM_SET_SREGS, we are not in nested mode yet when we do it and therefore
only root_mmu is reset.
On regular nested entries we call nested_svm_load_cr3 which both updates
the guest's CR3 in the MMU when it is needed, and it also initializes
the mmu again which makes it initialize the walk_mmu as well when nested
paging is enabled in both host and guest.
Since we don't call nested_svm_load_cr3 on nested state load,
the walk_mmu can be left uninitialized, which can lead to a NULL pointer
dereference while accessing it if we happen to get a nested page fault
right after entering the nested guest first time after the migration and
we decide to emulate it, which leads to the emulator trying to access
walk_mmu->gva_to_gpa which is NULL.
Therefore we should call this function on nested state load as well.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210401141814.1029036-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When dumping the current VMCS state, include the MSRs that are being
automatically loaded/stored during VM entry/exit.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210318120841.133123-6-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If EFER is not being loaded from the VMCS, show the effective value by
reference to the MSR autoload list or calculation.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210318120841.133123-5-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When deciding whether to dump the GUEST_IA32_EFER and GUEST_IA32_PAT
fields of the VMCS, examine only the VM entry load controls, as saving
on VM exit has no effect on whether VM entry succeeds or fails.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210318120841.133123-4-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Show EFER and PAT based on their individual entry/exit controls.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210318120841.133123-3-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If the VM entry/exit controls for loading/saving MSR_EFER are either
not available (an older processor or explicitly disabled) or not
used (host and guest values are the same), reading GUEST_IA32_EFER
from the VMCS returns an inaccurate value.
Because of this, in dump_vmcs() don't use GUEST_IA32_EFER to decide
whether to print the PDPTRs - always do so if the fields exist.
Fixes: 4eb64dce8d0a ("KVM: x86: dump VMCS on invalid entry")
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210318120841.133123-2-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently to support Intel->AMD migration, if CPU vendor is GenuineIntel,
we emulate the full 64 value for MSR_IA32_SYSENTER_{EIP|ESP}
msrs, and we also emulate the sysenter/sysexit instruction in long mode.
(Emulator does still refuse to emulate sysenter in 64 bit mode, on the
ground that the code for that wasn't tested and likely has no users)
However when virtual vmload/vmsave is enabled, the vmload instruction will
update these 32 bit msrs without triggering their msr intercept,
which will lead to having stale values in kvm's shadow copy of these msrs,
which relies on the intercept to be up to date.
Fix/optimize this by doing the following:
1. Enable the MSR intercepts for SYSENTER MSRs iff vendor=GenuineIntel
(This is both a tiny optimization and also ensures that in case
the guest cpu vendor is AMD, the msrs will be 32 bit wide as
AMD defined).
2. Store only high 32 bit part of these msrs on interception and combine
it with hardware msr value on intercepted read/writes
iff vendor=GenuineIntel.
3. Disable vmload/vmsave virtualization if vendor=GenuineIntel.
(It is somewhat insane to set vendor=GenuineIntel and still enable
SVM for the guest but well whatever).
Then zero the high 32 bit parts when kvm intercepts and emulates vmload.
Thanks a lot to Paulo Bonzini for helping me with fixing this in the most
correct way.
This patch fixes nested migration of 32 bit nested guests, that was
broken because incorrect cached values of SYSENTER msrs were stored in
the migration stream if L1 changed these msrs with
vmload prior to L2 entry.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210401111928.996871-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is similar to existing 'guest_cpuid_is_amd_or_hygon'
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210401111928.996871-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Switch to GFP_KERNEL_ACCOUNT for a handful of allocations that are
clearly associated with a single task/VM.
Note, there are a several SEV allocations that aren't accounted, but
those can (hopefully) be fixed by using the local stack for memory.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331023025.2485960-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reject KVM_SEV_INIT and KVM_SEV_ES_INIT if they are attempted after one
or more vCPUs have been created. KVM assumes a VM is tagged SEV/SEV-ES
prior to vCPU creation, e.g. init_vmcb() needs to mark the VMCB as SEV
enabled, and svm_create_vcpu() needs to allocate the VMSA. At best,
creating vCPUs before SEV/SEV-ES init will lead to unexpected errors
and/or behavior, and at worst it will crash the host, e.g.
sev_launch_update_vmsa() will dereference a null svm->vmsa pointer.
Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Fixes: ad73109ae7ec ("KVM: SVM: Provide support to launch and run an SEV-ES guest")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331031936.2495277-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Set sev->es_active only after the guts of KVM_SEV_ES_INIT succeeds. If
the command fails, e.g. because SEV is already active or there are no
available ASIDs, then es_active will be left set even though the VM is
not fully SEV-ES capable.
Refactor the code so that "es_active" is passed on the stack instead of
being prematurely shoved into sev_info, both to avoid having to unwind
sev_info and so that it's more obvious what actually consumes es_active
in sev_guest_init() and its helpers.
Fixes: ad73109ae7ec ("KVM: SVM: Provide support to launch and run an SEV-ES guest")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331031936.2495277-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting
VMSAs for SEV, which effectively switches to use online_vcpus instead of
created_vcpus. This fixes a possible null-pointer dereference as
created_vcpus does not guarantee a vCPU exists, since it is updated at
the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the
bulk of vCPU creation to run in parallel, while still correctly
restricting the max number of max vCPUs.
Fixes: ad73109ae7ec ("KVM: SVM: Provide support to launch and run an SEV-ES guest")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331031936.2495277-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use a basic NOT+AND sequence to clear the Accessed bit in TDP MMU SPTEs,
as opposed to the fancy ffs()+clear_bit() logic that was copied from the
legacy MMU. The legacy MMU uses clear_bit() because it is operating on
the SPTE itself, i.e. clearing needs to be atomic. The TDP MMU operates
on a local variable that it later writes to the SPTE, and so doesn't need
to be atomic or even resident in memory.
Opportunistically drop unnecessary initialization of new_spte, it's
guaranteed to be written before being accessed.
Using NOT+AND instead of ffs()+clear_bit() reduces the sequence from:
0x0000000000058be6 <+134>: test %rax,%rax
0x0000000000058be9 <+137>: je 0x58bf4 <age_gfn_range+148>
0x0000000000058beb <+139>: test %rax,%rdi
0x0000000000058bee <+142>: je 0x58cdc <age_gfn_range+380>
0x0000000000058bf4 <+148>: mov %rdi,0x8(%rsp)
0x0000000000058bf9 <+153>: mov $0xffffffff,%edx
0x0000000000058bfe <+158>: bsf %eax,%edx
0x0000000000058c01 <+161>: movslq %edx,%rdx
0x0000000000058c04 <+164>: lock btr %rdx,0x8(%rsp)
0x0000000000058c0b <+171>: mov 0x8(%rsp),%r15
to:
0x0000000000058bdd <+125>: test %rax,%rax
0x0000000000058be0 <+128>: je 0x58beb <age_gfn_range+139>
0x0000000000058be2 <+130>: test %rax,%r8
0x0000000000058be5 <+133>: je 0x58cc0 <age_gfn_range+352>
0x0000000000058beb <+139>: not %rax
0x0000000000058bee <+142>: and %r8,%rax
0x0000000000058bf1 <+145>: mov %rax,%r15
thus eliminating several memory accesses, including a locked access.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331004942.2444916-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Don't clear the dirty bit when aging a TDP MMU SPTE (in response to a MMU
notifier event). Prematurely clearing the dirty bit could cause spurious
PML updates if aging a page happened to coincide with dirty logging.
Note, tdp_mmu_set_spte_no_acc_track() flows into __handle_changed_spte(),
so the host PFN will be marked dirty, i.e. there is no potential for data
corruption.
Fixes: a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU")
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331004942.2444916-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove x86's trace_kvm_age_page() tracepoint. It's mostly redundant with
the common trace_kvm_age_hva() tracepoint, and if there is a need for the
extra details, e.g. gfn, referenced, etc... those details should be added
to the common tracepoint so that all architectures and MMUs benefit from
the info.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move arm64's MMU notifier trace events into common code in preparation
for doing the hva->gfn lookup in common code. The alternative would be
to trace the gfn instead of hva, but that's not obviously better and
could also be done in common code. Tracing the notifiers is also quite
handy for debug regardless of architecture.
Remove a completely redundant tracepoint from PPC e500.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the prototypes for the MMU notifier callbacks out of arch code and
into common code. There is no benefit to having each arch replicate the
prototypes since any deviation from the invocation in common code will
explode.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use the leaf-only TDP iterator when changing the SPTE in reaction to a
MMU notifier. Practically speaking, this is a nop since the guts of the
loop explicitly looks for 4k SPTEs, which are always leaf SPTEs. Switch
the iterator to match age_gfn_range() and test_age_gfn() so that a future
patch can consolidate the core iterating logic.
No real functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the address space ID check that is performed when iterating over
roots into the macro helpers to consolidate code.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pass the address space ID to TDP MMU's primary "zap gfn range" helper to
allow the MMU notifier paths to iterate over memslots exactly once.
Currently, both the legacy MMU and TDP MMU iterate over memslots when
looking for an overlapping hva range, which can be quite costly if there
are a large number of memslots.
Add a "flush" parameter so that iterating over multiple address spaces
in the caller will continue to do the right thing when yielding while a
flush is pending from a previous address space.
Note, this also has a functional change in the form of coalescing TLB
flushes across multiple address spaces in kvm_zap_gfn_range(), and also
optimizes the TDP MMU to utilize range-based flushing when running as L1
with Hyper-V enlightenments.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-6-seanjc@google.com>
[Keep separate for loops to prepare for other incoming patches. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Gather pending TLB flushes across both address spaces when zapping a
given gfn range. This requires feeding "flush" back into subsequent
calls, but on the plus side sets the stage for further batching
between the legacy MMU and TDP MMU. It also allows refactoring the
address space iteration to cover the legacy and TDP MMUs without
introducing truly ugly code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Gather pending TLB flushes across both the legacy and TDP MMUs when
zapping collapsible SPTEs to avoid multiple flushes if both the legacy
MMU (for nested guests) and TDP MMU have mappings for the memslot.
Note, this also optimizes the TDP MMU to flush only the relevant range
when running as L1 with Hyper-V enlightenments.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Place the onus on the caller of slot_handle_*() to flush the TLB, rather
than handling the flush in the helper, and rename parameters accordingly.
This will allow future patches to coalesce flushes between address spaces
and between the legacy and TDP MMUs.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When zapping collapsible SPTEs across multiple roots, gather pending
flushes and perform a single remote TLB flush at the end, as opposed to
flushing after processing every root.
Note, flush may be cleared by the result of zap_collapsible_spte_range().
This is intended and correct, e.g. yielding may have serviced a prior
pending flush.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
have X86_FEATURE_PERFCTR_CORE
MSR_F15H_PERF_CTL0-5, MSR_F15H_PERF_CTR0-5 MSRs have a CPUID bit assigned
to them (X86_FEATURE_PERFCTR_CORE) and when it wasn't exposed to the guest
the correct behavior is to inject #GP an not just return zero.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210329124804.170173-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
nested_svm_vmexit()
According to APM, the #DB intercept for a single-stepped VMRUN must happen
after the completion of that instruction, when the guest does #VMEXIT to
the host. However, in the current implementation of KVM, the #DB intercept
for a single-stepped VMRUN happens after the completion of the instruction
that follows the VMRUN instruction. When the #DB intercept handler is
invoked, it shows the RIP of the instruction that follows VMRUN, instead of
of VMRUN itself. This is an incorrect RIP as far as single-stepping VMRUN
is concerned.
This patch fixes the problem by checking, in nested_svm_vmexit(), for the
condition that the VMRUN instruction is being single-stepped and if so,
queues the pending #DB intercept so that the #DB is accounted for before
we execute L1's next instruction.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oraacle.com>
Message-Id: <20210323175006.73249-2-krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
On SVM, reading PDPTRs might access guest memory, which might fault
and thus might sleep. On the other hand, it is not possible to
release the lock after make_mmu_pages_available has been called.
Therefore, push the call to make_mmu_pages_available and the
mmu_lock critical section within mmu_alloc_direct_roots and
mmu_alloc_shadow_roots.
Reported-by: Wanpeng Li <wanpengli@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull generic x86 SGX changes needed to support SGX in virtual machines.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Fix potential crash in preemptible kernels
There is a potential race for preemptible kernels, where
the host kernel would get a fault when it is preempted as
the wrong point in time.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: Updates for 5.13
- properly handle MVPG in nesting KVM (vsie)
- allow to forward the yield_to hypercall (diagnose 9c)
- fixes
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Provide the missing dummy bug_get_file_line() implementation when
GENENERIC_BUG isn't selected.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 26dbc7e299c7 ("bug: Factor out a getter for a bug's file line")
Cc: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
store_regs_fmt2() has an ordering problem: first the guarded storage
facility is enabled on the local cpu, then preemption disabled, and
then the STGSC (store guarded storage controls) instruction is
executed.
If the process gets scheduled away between enabling the guarded
storage facility and before preemption is disabled, this might lead to
a special operation exception and therefore kernel crash as soon as
the process is scheduled back and the STGSC instruction is executed.
Fixes: 4e0b1ab72b8a ("KVM: s390: gs support for kvm guests")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Cc: <stable@vger.kernel.org> # 4.12
Link: https://lore.kernel.org/r/20210415080127.1061275-1-hca@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In case of error, the function devm_kasprintf() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210409094901.1903622-1-weiyongjun1@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The sparse tool complains as follows:
drivers/hwtracing/coresight/coresight-core.c:26:1: warning:
symbol '__pcpu_scope_csdev_sink' was not declared. Should it be static?
As csdev_sink is not used outside of coresight-core.c after the
introduction of coresight_[set|get]_percpu_sink() helpers, this
change marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210409094900.1902783-1-weiyongjun1@huawei.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
kvmarm-master/next
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
