| Age | Commit message (Collapse) | Author |
|---|
|
The existing ABI says that scanouts are pinned into the mappable region
so that legacy clients (e.g. old Xorg or plymouthd) can write directly
into the scanout through a GTT mapping. However if the surface does not
fit into the mappable region, we are better off just trying to fit it
anywhere and hoping for the best. (Any userspace that is capable of
using ginormous scanouts is also likely not to rely on pure GTT
updates.) With the partial vma fault support, we are no longer
restricted to only using scanouts that we can pin (though it is still
preferred for performance reasons and for powersaving features like
FBC).
v2: Skip fence pinning when not mappable.
v3: Add a comment to explain the possible ramifications of not being
able to use fences for unmappable scanouts.
v4: Rebase to skip over some local patches
v5: Rebase to defer until after we have unmappable GTT fault support
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Deepak S <deepak.s@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-27-chris@chris-wilson.co.uk
|
|
Often times we do not want to evict mapped objects from the GGTT as
these are quite expensive to teardown and frequently reused (causing an
equally, if not more so, expensive setup). In particular, when faulting
in a new object we want to avoid evicting an active object, or else we
may trigger a page-fault-of-doom as we ping-pong between evicting two
objects.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-26-chris@chris-wilson.co.uk
|
|
If FBC is set on a framebuffer that is unmapped, all GTT faults will be
from a partial mapping. Writes by the user through the partial VMA are
then untracked by the FBC and so we must use the ORIGIN_CPU when flushing
the I915_GEM_DOMAIN_GTT.
v2: Keep ORIGIN_CPU for set-to-domain(.write=CPU)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-25-chris@chris-wilson.co.uk
|
|
If we want to create a partial vma from a chunk that is the same size as
the object, create a normal ggtt vma instead. The benefit is that it
will match future requests for the normal ggtt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-24-chris@chris-wilson.co.uk
|
|
We want to always use the partial VMA as a fallback for a failure to
bind the object into the GGTT. This extends the support partial objects
in the GGTT to cover everything, not just objects too large.
v2: Call the partial view, view not partial.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-23-chris@chris-wilson.co.uk
|
|
In order to support setting up fences for partial mappings of an object,
we have to align those mappings with the fence. The minimum chunksize we
choose is at least the size of a single tile row.
v2: Make minimum chunk size a define for later use
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-22-chris@chris-wilson.co.uk
|
|
In order to handle tiled partial GTT mmappings, we need to associate the
fence with an individual vma.
v2: A couple of silly drops replaced spotted by Joonas
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-21-chris@chris-wilson.co.uk
|
|
Our current practice is to only name the actual list (here
dev_priv->fence_list) using "list", and elements upon that list are
referred to as "link". Further, the lru nature is of the list and not of
the node and including in the name does not disambiguate the link from
anything else.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-20-chris@chris-wilson.co.uk
|
|
Keep any error reported by the gup_worker until we are notified that the
arena has changed (via the mmu-notifier). This has the importance of
making two consecutive calls to i915_gem_object_get_pages() reporting
the same error, and curtailing a loop of detecting a fault and requeueing
a gup_worker.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-19-chris@chris-wilson.co.uk
|
|
If we have stolen available, make use of it for ringbuffer allocation.
Previously this was restricted to !llc platforms, as writing to stolen
requires a GGTT mapping - but now that we have partial mappable support,
the mappable aperture isn't quite so precious so we can use it more
freely and ringbuffers are a good user for the otherwise wasted stolen.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-18-chris@chris-wilson.co.uk
|
|
Now that we have WC vmapping available, we can bind our rings anywhere
in the GGTT and do not need to restrict them to the mappable region.
Except for stolen objects, for which direct access is verbatim and we
must use the mappable aperture.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-17-chris@chris-wilson.co.uk
|
|
By moving map-and-fenceable tracking from the object to the VMA, we gain
fine-grained tracking and the ability to track individual fences on the VMA
(subsequent patch).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-16-chris@chris-wilson.co.uk
|
|
As we cannot access the backing pages behind stolen objects, we should
not attempt to do so for relocations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-15-chris@chris-wilson.co.uk
|
|
If we cannot pin the entire object into the mappable region of the GTT,
try to pin a single page instead. This is much more likely to succeed,
and prevents us falling back to the clflush slow path.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-14-chris@chris-wilson.co.uk
|
|
With the introduction of the reloc page cache, we are just one step away
from refactoring the relocation write functions into one. Not only does
it tidy the code (slightly), but it greatly simplifies the control logic
much to gcc's satisfaction.
v2: Add selftests to document the relationship between the clflush
flags, the KMAP bit and packing into the page-aligned pointer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-13-chris@chris-wilson.co.uk
|
|
Since we know the write domain, we can drop the local variable and make
the code look a tiny bit simpler.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-12-chris@chris-wilson.co.uk
|
|
There is an improbable, but not impossible, case that if we leave the
pages unpin as we operate on the object, then somebody via the shrinker
may steal the lock (which lock? right now, it is struct_mutex, THE lock)
and change the cache domains after we have already inspected them.
(Whilst here, avail ourselves of the opportunity to take a couple of
steps to make the two functions look more similar.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-11-chris@chris-wilson.co.uk
|
|
If we quickly switch from writing through the GTT to a read of the
physical page directly with the CPU (e.g. performing relocations through
the GTT and then running the command parser), we can observe that the
writes are not visible to the CPU. It is not a coherency problem, as
extensive investigations with clflush have demonstrated, but a mere
timing issue - we have to wait for the GTT to complete it's write before
we start our read from the CPU.
The issue can be illustrated in userspace with:
gtt = gem_mmap__gtt(fd, handle, 0, OBJECT_SIZE, PROT_READ | PROT_WRITE);
cpu = gem_mmap__cpu(fd, handle, 0, OBJECT_SIZE, PROT_READ | PROT_WRITE);
gem_set_domain(fd, handle, I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT);
for (i = 0; i < OBJECT_SIZE / 64; i++) {
int x = 16*i + (i%16);
gtt[x] = i;
clflush(&cpu[x], sizeof(cpu[x]));
assert(cpu[x] == i);
}
Experimenting with that shows that this behaviour is indeed limited to
recent Atom-class hardware.
Testcase: igt/gem_exec_flush/basic-batch-default-cmd #byt
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-10-chris@chris-wilson.co.uk
|
|
If we want to read the pages directly via the CPU, we have to be sure
that we have to flush the writes via the GTT (as the CPU can not see
the address aliasing).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-9-chris@chris-wilson.co.uk
|
|
This is a companion to i915_gem_obj_prepare_shmem_read() that prepares
the backing storage for direct writes. It first serialises with the GPU,
pins the backing storage and then indicates what clfushes are required in
order for the writes to be coherent.
Whilst here, fix support for ancient CPUs without clflush for which we
cannot do the GTT+clflush tricks.
v2: Add i915_gem_obj_finish_shmem_access() for symmetry
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-8-chris@chris-wilson.co.uk
|
|
When doing relocations, we have to obtain a mapping to the page
containing the target address. This is either a kmap or iomap depending
on GPU and its cache coherency. Neighbouring relocation entries are
typically within the same page and so we can cache our kmapping between
them and avoid those pesky TLB flushes.
Note that there is some sleight-of-hand in how the slow relocate works
as the reloc_entry_cache implies pagefaults disabled (as we are inside a
kmap_atomic section). However, the slow relocate code is meant to be the
fallback from the atomic fast path failing. Fortunately it works as we
already have performed the copy_from_user for the relocation array (no
more pagefaults there) and the kmap_atomic cache is enabled after we
have waited upon an active buffer (so no more sleeping in atomic).
Magic!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-7-chris@chris-wilson.co.uk
|
|
If we cannot release the fence (for example if someone is inexplicably
trying to write into a tiled framebuffer that is currently pinned to the
display! *cough* kms_frontbuffer_tracking *cough*) fallback to using the
page-by-page pwrite/pread interface, rather than fail the syscall
entirely.
Since this is triggerable by the user (along pwrite) we have to remove
the WARN_ON(fence->pin_count).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-6-chris@chris-wilson.co.uk
|
|
Similarly to invalidating beforehand, if the object is mmapped via
I915_MMAP_WC we cannot track writes through the I915_GEM_DOMAIN_GTT. At
the conclusion of the write, i915_gem_object_flush_gtt_writes() we also
need to treat the origin carefully in case it may have been untracked.
See also commit aeecc9696aa0 ("drm/i915: use ORIGIN_CPU for frontbuffer
invalidation on WC mmaps").
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-5-chris@chris-wilson.co.uk
|
|
As pwrite does not use the fence for its GTT access, and may even go
through a secondary interface avoiding the main VMA, we cannot treat the
write as automatically invalidated by the hardware and so we require
ORIGIN_CPU frontbufer invalidate/flushes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-4-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Since vfree() now likes to WARN when passed a non-page-aligned pointer,
we need to discard the low bits to comply with it.
Fixes: d31d7cb1460c ("drm/i915: Support for creating write combined type vmaps")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-3-chris@chris-wilson.co.uk
|
|
After we update one PTE for a page, the caller expects to be able to
immediately use that through a GGTT read/write. To comply with the
callers expectations we therefore need to flush the chipset buffers
before returning.
Reported-by: Matti Hämäläinen <ccr@tnsp.org>
Fixes: d6473f566417 ("drm/i915: Add support for mapping an object page...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Matti Hämäläinen <ccr@tnsp.org>
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-2-chris@chris-wilson.co.uk
|
|
If userspace is asynchronously streaming into the batch or other
execobjects, we may not flush those writes along with a change in cache
domain (as there is no change). Therefore those writes may end up in
internal chipset buffers and not visible to the GPU upon execution. We
must issue a flush command or otherwise we encounter incoherency in the
batchbuffers and the GPU executing invalid commands (i.e. hanging) quite
regularly.
v2: Throw a paranoid wmb() into the general flush so that we remain
consistent with before.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90841
Fixes: 1816f9236303 ("drm/i915: Support creation of unbound wc user...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Tested-by: Matti Hämäläinen <ccr@tnsp.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-1-chris@chris-wilson.co.uk
|
|
It's possible to have a non-zero plane mask and still wind up with a
total data rate of zero. There are two cases where this can happen:
* planes are active (from the KMS point of view), but are
all fully clipped (positioned offscreen)
* the only active plane on a CRTC is the cursor (which is handled
independently and not counted into the general data rate computations
These are both valid display setups (although unusual), so we need to
drop the WARN().
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Testcase: kms_universal_planes.cursor-only-pipe-*
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466196140-16336-4-git-send-email-matthew.d.roper@intel.com
Cc: stable@vger.kernel.org #v4.7+
|
|
intel_state->active_crtcs is usually only initialized when doing a
modeset. During our first atomic commit after boot, we're effectively
faking a modeset to sanitize the DDB/wm setup, so ensure that this field
gets initialized before use.
v2:
- Don't clobber active_crtcs if our first commit really is a modeset
(Maarten)
- Grab connection_mutex when faking a modeset during sanitization
(Maarten)
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466196140-16336-2-git-send-email-matthew.d.roper@intel.com
Cc: stable@vger.kernel.org #v4.7+
|
|
Brief parameter text to describe @engines.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471437762-22936-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
In commit 247177ddd517 ("drm/i915: Always set the vma->pages"), as it
title implies, we always set vma->pages for bound objects. Even before
that, we would set vma->ggtt_view.pages, for globally bound objects.
This was forgotten for the fixup inside the preallocated stolen objects,
which has to recreate a global GTT binding outside of the usual VMA
insertion path
Fixes: 247177ddd517 ("drm/i915: Always set the vma->pages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471430013-3449-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Local function with forgotten static declaration.
Fixes: 19625e85c6ec ("drm/i915: Enable polling when we don't have hpd")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lyude <cpaul@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471432146-5196-2-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Silence sparse who warns that the global variable is not declared
static.
Fixes: 0b1de5d58e19 ("drm/i915: Use SSE4.1 movntdqa to ...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471432146-5196-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
Build the legacy semaphore initialisation array using the engine
hardware ids instead of driver internal ones. This makes the
static array size dependent only on the number of gen6 semaphore
engines.
Also makes the per-engine semaphore wait and signal tables
hardware id indexed saving some more space.
v2: Refactor I915_GEN6_NUM_ENGINES to GEN6_SEMAPHORE_LAST. (Chris Wilson)
v3: More polish. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1471363461-9973-1-git-send-email-tvrtko.ursulin@linux.intel.com
|
|
Put the engine hardware id in the common header so they are
not only associated with the GuC since they are needed for
the legacy semaphores implementation.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Just make the logic simple enough for even GCC to understand (and
foolproof against random changes):
drivers/gpu/drm/i915/intel_runtime_pm.c: warning: 'cmn_a_well' may be
used uninitialized in this function [-Wuninitialized]: => 871:23
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1471284383-22324-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Imre Deak <imre.deak@intel.com>
|
|
Daniel Vetter proposed a new challenge to the serialisation inside the
busy-ioctl that exposed a flaw that could result in us reporting the
wrong engine as being busy. If the request is reallocated as we test
its busyness and then reassigned to this object by another thread, we
would not notice that the test itself was incorrect.
We are faced with a choice of using __i915_gem_active_get_request_rcu()
to first acquire a reference to the request preventing the race, or to
acknowledge the race and accept the limitations upon the accuracy of the
busy flags. Note that we guarantee that we never falsely report the
object as idle (providing userspace itself doesn't race), and so the
most important use of the busy-ioctl and its guarantees are fulfilled.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471337440-16777-1-git-send-email-chris@chris-wilson.co.uk
|
|
Reported-by: 0day kbuild test robot
Fixes: 2bd160a131ac ("drm/i915: Reduce i915_gem_objects to only show...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1471263496-27537-1-git-send-email-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
|
|
Just another useful register to inspect following a GPU hang.
v2: Remove partial decoding of RING_MODE to userspace, be consistent and
use GEN > 2 guards around RING_MODE everywhere.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-32-git-send-email-chris@chris-wilson.co.uk
|
|
There is no other state pertaining to the completed requests in the
hang, other than gleamed through the ringbuffer, so including the
expired requests in the list of outstanding requests simply adds noise.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-31-git-send-email-chris@chris-wilson.co.uk
|
|
It is useful when looking at captured error states to check the recorded
BBADDR register (the address of the last batchbuffer instruction loaded)
against the expected offset of the batch buffer, and so do a quick check
that (a) the capture is true or (b) HEAD hasn't wandered off into the
badlands.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-30-git-send-email-chris@chris-wilson.co.uk
|
|
Since contexts are not currently shared between userspace processes, we
have an exact correspondence between context creator and guilty batch
submitter. Therefore we can save some per-batch work by inspecting the
context->pid upon error instead. Note that we take the context's
creator's pid rather than the file's pid in order to better track fd
passed over sockets.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-29-git-send-email-chris@chris-wilson.co.uk
|
|
This little helper only exists to safely discard the upper unused 32bits
of the general 64-bit VMA address - as we know that all Global GTT
currently are less than 4GiB in size and so that the upper bits must be
zero. In many places, we use a u32 for the global GTT offset and we want
to document where we are discarding the full VMA offset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-28-git-send-email-chris@chris-wilson.co.uk
|
|
Treat the VMA as the primary struct responsible for tracking bindings
into the GPU's VM. That is we want to treat the VMA returned after we
pin an object into the VM as the cookie we hold and eventually release
when unpinning. Doing so eliminates the ambiguity in pinning the object
and then searching for the relevant pin later.
v2: Joonas' stylistic nitpicks, a fun rebase.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-27-git-send-email-chris@chris-wilson.co.uk
|
|
In a few places, we repeat a call to clear a pointer to a vma whilst
unpinning and releasing a reference to its owner. Refactor those into a
common function.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-26-git-send-email-chris@chris-wilson.co.uk
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-25-git-send-email-chris@chris-wilson.co.uk
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-24-git-send-email-chris@chris-wilson.co.uk
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-23-git-send-email-chris@chris-wilson.co.uk
|
|
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-22-git-send-email-chris@chris-wilson.co.uk
|
|
Since the intel_engine_init_seqno() is shared by all engine submission
backends, move it out of the legacy intel_ringbuffer.c and
into the new home for common routines, intel_engine_cs.c
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471254551-25805-21-git-send-email-chris@chris-wilson.co.uk
|
