| Age | Commit message (Collapse) | Author |
|---|
|
Original busy loop with retries count in mpf_poll_status() is not too
reliable, as it takes different times on different systems. Replace it
with read_poll_timeout() macro.
While at it, fix polling stop condition to met function's original
intention declared in the comment. The issue with original polling stop
condition is that it stops if any of mask bits is set, while intention
was to stop if all mask bits is set. This was not noticible because only
MPF_STATUS_READY is passed as mask argument and it is BIT(1).
Fixes: 5f8d4a900830 ("fpga: microchip-spi: add Microchip MPF FPGA manager")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221230092922.18822-3-i.bornyakov@metrotek.ru
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
|
|
As spi-summary doc says:
> I/O buffers use the usual Linux rules, and must be DMA-safe.
> You'd normally allocate them from the heap or free page pool.
> Don't use the stack, or anything that's declared "static".
Replace spi_write() with spi_write_then_read(), which is dma-safe for
on-stack buffers. Use cacheline aligned buffers for transfers used in
spi_sync_transfer().
Although everything works OK with stack-located I/O buffers, better
follow the doc to be safe.
Fixes: 5f8d4a900830 ("fpga: microchip-spi: add Microchip MPF FPGA manager")
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20221230092922.18822-2-i.bornyakov@metrotek.ru
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
|
|
"tcpdump" is used to capture traffic in these tests while using a random,
temporary and not suffixed file for it. This can interfere with apparmor
configuration where the tool is only allowed to read from files with
'known' extensions.
The MINE type application/vnd.tcpdump.pcap was registered with IANA for
pcap files and .pcap is the extension that is both most common but also
aligned with standard apparmor configurations. See TCPDUMP(8) for more
details.
This improves compatibility with standard apparmor configurations by
using ".pcap" as the file extension for the tests' temporary files.
Signed-off-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the missing module device table so that the driver can be autoloaded
when built as a module.
Fixes: 40ce9798794f ("nvmem: add QTI SDAM driver")
Cc: stable@vger.kernel.org # 5.6
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Dan Carpenter points out that the return code was not set in commit
60c8b4aebd8e ("nvmem: core: fix cleanup after dev_set_name()"), but
this is not the only issue - we also need to zero wp_gpio to prevent
gpiod_put() being called on an error value.
Fixes: 560181d3ace6 ("nvmem: core: fix cleanup after dev_set_name()")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
nvmem_add_cells() could return an error after some cells are already
added to the provider. In this case, the added cells are not removed.
Remove any registered cells if nvmem_add_cells() fails.
Fixes: fa72d847d68d7 ("nvmem: check the return value of nvmem_add_cells()")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In of_nvmem_cell_get(), of_get_next_parent() is used on cell_np. This
will decrement the refcount on cell_np, but cell_np is still used later
in the code. Use of_get_parent() instead and of_node_put() in the
appropriate places.
Fixes: 69aba7948cbe ("nvmem: Add a simple NVMEM framework for consumers")
Fixes: 7ae6478b304b ("nvmem: core: rework nvmem cell instance creation")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The i.MX6 CPU frequency driver sometimes fails to register at boot time
due to nvmem_cell_read_u32() sporadically returning -ENOENT.
This happens because there is a window where __nvmem_device_get() in
of_nvmem_cell_get() is able to return the nvmem device, but as cells
have been setup, nvmem_find_cell_entry_by_node() returns NULL.
The occurs because the nvmem core registration code violates one of the
fundamental principles of kernel programming: do not publish data
structures before their setup is complete.
Fix this by making nvmem core code conform with this principle.
Fixes: eace75cfdcf7 ("nvmem: Add a simple NVMEM framework for nvmem providers")
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If dev_set_name() fails, we leak nvmem->wp_gpio as the cleanup does not
put this. While a minimal fix for this would be to add the gpiod_put()
call, we can do better if we split device_register(), and use the
tested nvmem_release() cleanup code by initialising the device early,
and putting the device.
This results in a slightly larger fix, but results in clear code.
Note: this patch depends on "nvmem: core: initialise nvmem->id early"
and "nvmem: core: remove nvmem_config wp_gpio".
Fixes: 5544e90c8126 ("nvmem: core: add error handling for dev_set_name")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[Srini: Fixed subject line and error code handing with wp_gpio while applying.]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
No one provides wp_gpio, so let's remove it to avoid issues with
the nvmem core putting this gpio.
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The error path for wp_gpio attempts to free the IDA nvmem->id, but
this has yet to be assigned, so will always be zero - leaking the
ID allocated by ida_alloc(). Fix this by moving the initialisation
of nvmem->id earlier.
Fixes: f7d8d7dcd978 ("nvmem: fix memory leak in error path")
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SID SRAM on at least some SoCs (A64 and D1) returns different values
when read with bus cycles narrower than 32 bits. This is not immediately
obvious, because memcpy_fromio() uses word-size accesses as long as
enough data is being copied.
The vendor driver always uses 32-bit MMIO reads, so do the same here.
This is faster than the register-based method, which is currently used
as a workaround on A64. And it fixes the values returned on D1, where
the SRAM method was being used.
The special case for the last word is needed to maintain .word_size == 1
for sysfs ABI compatibility, as noted previously in commit de2a3eaea552
("nvmem: sunxi_sid: Optimize register read-out method").
Fixes: 07ae4fde9efa ("nvmem: sunxi_sid: Add support for D1 variant")
Cc: stable@vger.kernel.org
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the check for the return value of kzalloc in order to avoid
NULL pointer dereference.
Fixes: 6e977eaa8280 ("nvmem: brcm_nvram: parse NVRAM content into NVMEM cells")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230127104015.23839-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Kornel Dulęba says:
====================
net: wwan: t7xx: Fix Runtime PM implementation
d10b3a695ba0 ("net: wwan: t7xx: Runtime PM") introduced support for
Runtime PM for this driver, but due to a bug in the initialization logic
the usage refcount would never reach 0, leaving the feature unused.
This patchset addresses that, together with a bug found after runtime
suspend was enabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For PCI devices the Runtime PM refcount is incremented twice:
1. During device enumeration with a call to pm_runtime_forbid.
2. Just before a driver probe logic is called.
Because of that in order to enable Runtime PM on a given device
we have to call both pm_runtime_allow and pm_runtime_put_noidle,
once it's ready to be runtime suspended.
The former was missing causing the pm refcount to never reach 0.
Fixes: d10b3a695ba0 ("net: wwan: t7xx: Runtime PM")
Signed-off-by: Kornel Dulęba <mindal@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Resume device before calling napi_schedule, instead of doing in the napi
poll routine. Polling is done in softrq context. We can't call the PM
resume logic from there as it's blocking and not irq safe.
In order to make it work modify the interrupt handler to be run from irq
handler thread.
Fixes: 5545b7b9f294 ("net: wwan: t7xx: Add NAPI support")
Signed-off-by: Kornel Dulęba <mindal@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We may have pending skbs in the receive queue when the sk is being
destroyed; add a destructor to purge the queue.
MCTP doesn't use the error queue, so only the receive_queue is purged.
Fixes: 833ef3b91de6 ("mctp: Populate socket implementation")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230126064551.464468-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The probe() function is only used for the DP83822 PHY, leaving the
private data pointer uninitialized for the smaller DP83825/26 models.
While all uses of the private data structure are hidden in 82822 specific
callbacks, configuring the interrupt is shared across all models.
This causes a NULL pointer dereference on the smaller PHYs as it accesses
the private data unchecked. Verifying the pointer avoids that.
Fixes: 5dc39fd5ef35 ("net: phy: DP83822: Add ability to advertise Fiber connection")
Signed-off-by: Andre Kalb <andre.kalb@sma.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/Y9FzniUhUtbaGKU7@pc6682
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.2
An unfortunately large batch of fixes here, the numbers amplified
by several repeated fixes for patterns of bugs in multiple
drivers. Most of this is in the x86 drivers which are very
actively developed, the implementation of PCI shutdown is a fix
for issues with spamming warnings into the logs with a leaked
reference to the i915 driver.
|
|
Function radix_tree_insert() returns errors if the node hasn't
been initialized and added to the tree.
"kfree(node)" and return value "NULL" of node_get() help
to avoid using unclear node in other calls.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: <stable@vger.kernel.org> # 5.7
Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20230125134831.8090-1-n.petrova@fintech.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If you call listen() and accept() on an already connect()ed
rose socket, accept() can successfully connect.
This is because when the peer socket sends data to sendmsg,
the skb with its own sk stored in the connected socket's
sk->sk_receive_queue is connected, and rose_accept() dequeues
the skb waiting in the sk->sk_receive_queue.
This creates a child socket with the sk of the parent
rose socket, which can cause confusion.
Fix rose_listen() to return -EINVAL if the socket has
already been successfully connected, and add lock_sock
to prevent this issue.
Signed-off-by: Hyunwoo Kim <v4bel@theori.io>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230125105944.GA133314@ubuntu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent sfc NICs are TSO capable for some tunnel protocols. However, it
was not working properly because the feature was not advertised in
hw_enc_features, but in hw_features only.
Setting up a GENEVE tunnel and using iperf3 to send IPv4 and IPv6 traffic
to the tunnel show, with tcpdump, that the IPv4 packets still had ~64k
size but the IPv6 ones had only ~1500 bytes (they had been segmented by
software, not offloaded). With this patch segmentation is offloaded as
expected and the traffic is correctly received at the other end.
Fixes: 24b2c3751aa3 ("sfc: advertise encapsulated offloads on EF10")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230125143513.25841-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
bpf 2023-01-27
We've added 10 non-merge commits during the last 9 day(s) which contain
a total of 10 files changed, 170 insertions(+), 59 deletions(-).
The main changes are:
1) Fix preservation of register's parent/live fields when copying
range-info, from Eduard Zingerman.
2) Fix an off-by-one bug in bpf_mem_cache_idx() to select the right
cache, from Hou Tao.
3) Fix stack overflow from infinite recursion in sock_map_close(),
from Jakub Sitnicki.
4) Fix missing btf_put() in register_btf_id_dtor_kfuncs()'s error path,
from Jiri Olsa.
5) Fix a splat from bpf_setsockopt() via lsm_cgroup/socket_sock_rcv_skb,
from Kui-Feng Lee.
6) Fix bpf_send_signal[_thread]() helpers to hold a reference on the task,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix the kernel crash caused by bpf_setsockopt().
selftests/bpf: Cover listener cloning with progs attached to sockmap
selftests/bpf: Pass BPF skeleton to sockmap_listen ops tests
bpf, sockmap: Check for any of tcp_bpf_prots when cloning a listener
bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itself
bpf: Add missing btf_put to register_btf_id_dtor_kfuncs
selftests/bpf: Verify copy_register_state() preserves parent/live fields
bpf: Fix to preserve reg parent/live fields when copying range info
bpf: Fix a possible task gone issue with bpf_send_signal[_thread]() helpers
bpf: Fix off-by-one error in bpf_mem_cache_idx()
====================
Link: https://lore.kernel.org/r/20230127215820.4993-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GSO should not merge page pool recycled frames with standard reference
counted frames. Traditionally this didn't occur, at least not often.
However as we start looking at adding support for wireless adapters there
becomes the potential to mix the two due to A-MSDU repartitioning frames in
the receive path. There are possibly other places where this may have
occurred however I suspect they must be few and far between as we have not
seen this issue until now.
Fixes: 53e0961da1c7 ("page_pool: add frag page recycling support in page pool")
Reported-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/167475990764.1934330.11960904198087757911.stgit@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix description for tristate and help sections which include inaccurate
information.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230126190110.9124-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Magnus Karlsson says:
====================
net: xdp: execute xdp_do_flush() before napi_complete_done()
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found in [1].
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in [2].
The drivers have only been compile-tested since I do not own any of
the HW below. So if you are a maintainer, it would be great if you
could take a quick look to make sure I did not mess something up.
Note that these were the drivers I found that violated the ordering by
running a simple script and manually checking the ones that came up as
potential offenders. But the script was not perfect in any way. There
might still be offenders out there, since the script can generate
false negatives.
[1] https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
[2] https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
====================
Link: https://lore.kernel.org/r/20230125074901.2737-1-magnus.karlsson@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Fixes: d678be1dc1ec ("dpaa2-eth: add XDP_REDIRECT support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Fixes: a1e031ffb422 ("dpaa_eth: add XDP_REDIRECT support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Fixes: 186b3c998c50 ("virtio-net: support XDP_REDIRECT")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Fixes: a825b611c7c1 ("net: lan966x: Add support for XDP_REDIRECT")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.
The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.
Fixes: d1b25b79e162b ("qede: add .ndo_xdp_xmit() and XDP_REDIRECT support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull cifs fix from Steve French:
"Fix for reconnect oops in smbdirect (RDMA), also is marked for stable"
* tag '6.2-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix oops due to uncleared server->smbd_conn in reconnect
|
|
Pull block fixes from Jens Axboe:
"Minor tweaks for this release:
- NVMe pull request via Christoph:
- Flush initial scan_work for async probe (Keith Busch)
- Fix passthrough csi check (Keith Busch)
- Fix nvme-fc initialization order (Ross Lagerwall)
- Fix for tearing down non-started device in ublk (Ming)"
* tag 'block-6.2-2023-01-27' of git://git.kernel.dk/linux:
block: ublk: move ublk_chr_class destroying after devices are removed
nvme: fix passthrough csi check
nvme-pci: flush initial scan_work for async probe
nvme-fc: fix initialization order
|
|
Pull io_uring fixes from Jens Axboe:
"Two small fixes for this release:
- Sanitize how async prep is done for drain requests, so we ensure
that it always gets done (Dylan)
- A ring provided buffer recycling fix for multishot receive (me)"
* tag 'io_uring-6.2-2023-01-27' of git://git.kernel.dk/linux:
io_uring: always prep_async for drain requests
io_uring/net: cache provided buffer group value for multishot receives
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST
- Reorganize gcc-plugin includes for GCC 13
- Silence bcache memcpy run-time false positive warnings
* tag 'hardening-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
bcache: Silence memcpy() run-time false positive warnings
gcc-plugins: Reorganize gimple includes for GCC 13
kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix filter memory leak by calling ftrace_free_filter()
- Initialize trace_printk() earlier so that ftrace_dump_on_oops shows
data on early crashes.
- Update the outdated instructions in scripts/tracing/ftrace-bisect.sh
- Add lockdep_is_held() to fix lockdep warning
- Add allocation failure check in create_hist_field()
- Don't initialize pointer that gets set right away in enabled_monitors_write()
- Update MAINTAINER entries
- Fix help messages in Kconfigs
- Fix kernel-doc header for update_preds()
* tag 'trace-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Update MAINTAINERS file to add tree and mailing list
rv: remove redundant initialization of pointer ptr
ftrace: Maintain samples/ftrace
tracing/filter: fix kernel-doc warnings
lib: Kconfig: fix spellos
trace_events_hist: add check for return value of 'create_hist_field'
tracing/osnoise: Use built-in RCU list checking
tracing: Kconfig: Fix spelling/grammar/punctuation
ftrace/scripts: Update the instructions for ftrace-bisect.sh
tracing: Make sure trace_printk() can output as soon as it can be used
ftrace: Export ftrace_free_filter() to modules
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A bunch of driver fixes with a tiny bit of new IDs"
* tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rk3x: fix a bunch of kernel-doc warnings
i2c: axxia: use 'struct' for kernel-doc notation
dt-bindings: i2c: renesas,rzv2m: Fix SoC specific string
i2c: mxs: suppress probe-deferral error message
i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
i2c: designware: Fix unbalanced suspended flag
i2c: designware: use casting of u64 in clock multiplication to avoid overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the -c option in the gpio-event-mode user-space example program
- fix the irq number translation in gpio-ep93xx and make its irqchip
immutable
- add a missing spin_unlock in error path in gpio-mxc
- fix a suspend breakage on System76 and Lenovo Gen2a introduced in
GPIO ACPI
* tag 'gpio-fixes-for-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
tools: gpio: fix -c option of gpio-event-mon
gpio: ep93xx: remove unused variable
gpio: ep93xx: Make irqchip immutable
gpio: ep93xx: Fix port F hwirq numbers in handler
gpio: mxc: Unlock on error path in mxc_flip_edge()
gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A fix for the DT binding documentation which dropped a property when
being converted to YAML format causing spurious errors validating
device trees for platforms using the device"
* tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: samsung,s2mps14: add lost samsung,ext-control-gpios
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two bugs, a recent one introduced in the last cycle, and an older
one from v5.11"
* tag 'ovl-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fail on invalid uid/gid mapping at copy up
ovl: fix tmpfile leak
|
|
Pull drm fixes from Dave Airlie:
"Fairly small this week as well, i915 has a memory leak fix and some
minor changes, and amdgpu has some MST fixes, and some other minor
ones:
drm:
- DP MST kref fix
- fb_helper: check return value
i915:
- Fix BSC default context for Meteor Lake
- Fix selftest-scheduler's modify_type
- memory leak fix
amdgpu:
- GC11.x fixes
- SMU13.0.0 fix
- Freesync video fix
- DP MST fixes
- build fix"
* tag 'drm-fixes-2023-01-27' of git://anongit.freedesktop.org/drm/drm:
amdgpu: fix build on non-DCN platforms.
drm/amd/display: Fix timing not changning when freesync video is enabled
drm/display/dp_mst: Correct the kref of port.
drm/amdgpu/display/mst: update mst_mgr relevant variable when long HPD
drm/amdgpu/display/mst: limit payload to be updated one by one
drm/amdgpu/display/mst: Fix mst_state->pbn_div and slot count assignments
drm/amdgpu: declare firmware for new MES 11.0.4
drm/amdgpu: enable imu firmware for GC 11.0.4
drm/amd/pm: add missing AllowIHInterrupt message mapping for SMU13.0.0
drm/amdgpu: remove unconditional trap enable on add gfx11 queues
drm/fb-helper: Use a per-driver FB deferred I/O handler
drm/fb-helper: Check fb_deferred_io_init() return value
drm/i915/selftest: fix intel_selftest_modify_policy argument types
drm/i915/mtl: Fix bcs default context
drm/i915: Fix a memory leak with reused mmap_offset
drm/drm_vma_manager: Add drm_vma_node_allow_once()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add ACPI backlight handling quirks for 3 machines (Hans de Goede)"
* tag 'acpi-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add backlight=native DMI quirk for Asus U46E
ACPI: video: Add backlight=native DMI quirk for HP EliteBook 8460p
ACPI: video: Add backlight=native DMI quirk for HP Pavilion g6-1d80nr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Add locking to the Intel int340x thermal control driver to prevent its
thermal zone callbacks from racing with firmware-induced thermal trip
point updates (Srinivas Pandruvada, Rafael Wysocki)"
* tag 'thermal-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: Add locking to int340x_thermal_get_trip_type()
thermal: intel: int340x: Protect trip temperature from concurrent updates
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
- Fix event counting regression in Arm CMN PMU driver due to broken
optimisation
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Partially revert "perf/arm-cmn: Optimise DTC counter accesses"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A few DT bindings fixes to more closely align the ISA string
requirements between the bindings and the ISA manual.
- A handful of build error/warning fixes.
- A fix to move init_cpu_topology() later in the boot flow, so it can
allocate memory.
- The IRC channel is now in the MAINTAINERS file, so it's easier to
find.
* tag 'riscv-for-linus-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Move call to init_cpu_topology() to later initialization stage
riscv/kprobe: Fix instruction simulation of JALR
riscv: fix -Wundef warning for CONFIG_RISCV_BOOT_SPINWAIT
MAINTAINERS: add an IRC entry for RISC-V
RISC-V: fix compile error from deduplicated __ALTERNATIVE_CFG_2
dt-bindings: riscv: fix single letter canonical order
dt-bindings: riscv: fix underscore requirement for multi-letter extensions
|
|
Pull ARM fixes from Russell King:
- fix nommu assignment build warning
- fix -Wundef preprocessor warning
- reduce __thumb2__ definitions for crypto files that require it
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9287/1: Reduce __thumb2__ definition to crypto files that require it
ARM: 9284/1: include <asm/pgtable.h> from proc-macros.S to fix -Wundef warnings
ARM: 9280/1: mm: fix warning on phys_addr_t to void pointer assignment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"A single fix to a amd-pstate test Makefile bug that deletes source
files during make clean run"
* tag 'linux-kselftest-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: amd-pstate: Don't delete source files via Makefile
|
|
Current link for NAPI documentation in ice driver doesn't work - it
returns 404. Update the link to the working one.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The PF controls the set of queues that the RDMA auxiliary_driver requests
resources from. The set_channel command will alter that pool and trigger a
reconfiguration of the VSI, which breaks RDMA functionality.
Prevent set_channel from executing when RDMA driver bound to auxiliary
device.
Adding a locked variable to pass down the call chain to avoid double
locking the device_lock.
Fixes: 348048e724a0 ("ice: Implement iidc operations")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If st_uid/st_gid doesn't have a mapping in the mounter's user_ns, then
copy-up should fail, just like it would fail if the mounter task was doing
the copy using "cp -a".
There's a corner case where the "cp -a" would succeed but copy up fail: if
there's a mapping of the invalid uid/gid (65534 by default) in the user
namespace. This is because stat(2) will return this value if the mapping
doesn't exist in the current user_ns and "cp -a" will in turn be able to
create a file with this uid/gid.
This behavior would be inconsistent with POSIX ACL's, which return -1 for
invalid uid/gid which result in a failed copy.
For consistency and simplicity fail the copy of the st_uid/st_gid are
invalid.
Fixes: 459c7c565ac3 ("ovl: unprivieged mounts")
Cc: <stable@vger.kernel.org> # v5.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Seth Forshee <sforshee@kernel.org>
|
