summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-10-30brcmfmac: (clean) Rename sdio related files.Hante Meuleman
Rename sdio_host.h to sdio.h and dhd_sdio.c to sdio.c. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: (clean) Rename files wl_cfg80211 to cfg80211Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: (clean) Rename dhd_common.c in common.cHante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: (clean) Rename dhd_bus.h in bus.hHante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: (clean) Rename files dhd_dbg to debugHante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: (clean) Move tracepoint related function.Hante Meuleman
__brcmf_err is a tracepoint specific function. Move it to tracepoint.c. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: (clean) Remove packet filter configuration.Hante Meuleman
Packet filters got configured but never used. Reviewed-by: Franky Lin <frankyl@broadcom.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: (clean) Remove usb_rdl.h as it is not needed.Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: do not use firmware error code in driverArend van Spriel
Passing the firmware error codes up the driver may be mapped to linux error numbers which may impact proper fault analysis. So better pass up a generic failure code, ie. -EBADE and only show firmware error code in FIL debug message. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: remove unused defintionArend van Spriel
The define EBRCMF_UNSUPPORTED is not used in the source file so this patch removes it. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: show firmware error as string in debug messageArend van Spriel
Showing the firmware error allows to quickly give a clue what went wrong and directly look in the firmware code that gave us back the error. Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: Add wowl patterns support.Hante Meuleman
Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: Add wowl support for SDIO devices.Hante Meuleman
This patch adds wowl support for SDIO bus devices. This feature requires FW which has support for wowl built in. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30brcmfmac: Add wowl support for USB devices.Hante Meuleman
This patch adds wowl support for USB bus devices. This feature requires FW which has support for wowl built in. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30ath9k: set pulse_rssi threshold to 15Lorenzo Bianconi
Reduce pulse_rssi threshold to 15 in order to improve radar pattern detection probability on ext channel Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30Merge tag 'iwlwifi-next-for-john-2014-10-29' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Emmanuel Grumbach <egrumbach@gmail.com> says: "The big new thing here is netdetect which allows the firmware to wake up the platform when a specific network is detected. Along with that I have fixes for d3 operation. The usual amount of rate scaling stuff - we now support STBC. The other commit that stands out is Johannes's work on devcoredump. He basically starts to use the standard infrastructure he built." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-30Bluetooth: Clear LE white list when resetting controllerMarcel Holtmann
The internal representation of the LE white list needs to be cleared when receiving a successful HCI_Reset command. A reset of the controller is expected to start with an empty LE white list. When the LE white list is not cleared on controller reset, the passive background scanning might skip programming the remote devices. Only changes to the LE white list are programmed when passive background is started. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org # 3.17.x
2014-10-30Bluetooth: 6lowpan: use after free in disconnect_devices()Dan Carpenter
This was accidentally changed from list_for_each_entry_safe() to list_for_each_entry() so now it has a use after free bug. I've changed it back. Fixes: 90305829635d ('Bluetooth: 6lowpan: Converting rwlocks to use RCU') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: add basic support for monitorAlexander Aring
This patch adds basic support for monitor mode. Also change the open call that we set the transceiver mac setting on an interface up. Futher patches will add a better handling while interface up an interface. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29at86rf230: deliver with checksumAlexander Aring
This patch indicates that the at86rf230 driver deliver with checksum instead drop the crc before delivering. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: rx: add error handling after skb_cloneAlexander Aring
This patch adds error handling after skb_clone and deliver only if skb_clone was successful. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: rx: monitor receive cleanupAlexander Aring
This patch replace the !netif_running(sdata->dev) instead we doing a !ieee802154_sdata_running(sdata). Also move this in two separate if branches to compare with mac80211 code. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: rx: add rx stats incrementationAlexander Aring
This patch adds rx stats incrementation when the monitor interface recevied a frame. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: rx: use netif_receive_skbAlexander Aring
This patch removes netif_rx_ni call. Instead we call netif_receive_skb, we can do that since commit c5c47e67bcd24638a059b1b5e9ec18c95f8634ca ("mac802154: rx: use tasklet instead workqueue"). Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: rx: remove override pkt_type set to PACKET_HOSTAlexander Aring
This patch removes pkt_type set to PACKET_HOST while monitor receiving. This should be PACKET_OTHERHOST on monitor mode which already set before. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: rx: add software checksum filtering checkAlexander Aring
This patch adds a new hardware flag which indicate that the transceiver doesn't support check for bad checksum via hardware. Also add a handling of this while receive. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: rx: simplify crc receive handlingAlexander Aring
This patch change the actual crc handling while receive. Currently the IEEE802154_HW_RX_OMIT_CKSUM flag is used to filter a frame with a bad crc. This patch changes the behaviour of IEEE802154_HW_RX_OMIT_CKSUM to add a crc while receiving for the monitor interface. After monitor receiving we remove the crc for frame parsing. This affect the driver layer because all drivers sets IEEE802154_HW_RX_OMIT_CKSUM and deliver without checksum. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: rx: remove unnecessary parameterAlexander Aring
This patch removes a not used parameter in ieee802154_deliver_skb. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: separate omit tx/rx flagsAlexander Aring
This patch splits the IEEE802154_HW_OMIT_CKSUM hardware flag into IEEE802154_HW_TX_OMIT_CKSUM and IEEE802154_HW_RX_OMIT_CKSUM. This is useful to deliver the received crc from the driver layer to the monitor interface. At the moment we can't do that without change the xmit handling. The received checksum should be visible in monitor mode only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29at86rf230: add support for promiscuous modeAlexander Aring
This patch adds support for promiscuous mode setting for the at86rf230 driver. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: add support for promiscuous modeAlexander Aring
This patch adds a new driver operation to bring the transceiver into promiscuous mode. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: add hardware address filter flagAlexander Aring
Overdue introduction for address filtering hardware flag. Furthermore we will check and set address filtering on interface up. This patch prepares that we can check if an transceiver supports address filtering option. Currently all mainline driver supports hardware address filtering. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Cc: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: add IEEE802154_HW_ARET hw flagAlexander Aring
This patch adds a new IEEE802154_HW_ARET hardware flag for indicating that the transceiver supports ARET handling. Also remove the IEEE802154_HW_FRAME_RETRIES from IEEE802154_HW_CSMA flag. Frame retries handling is part of ARET. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: remove tab after defineAlexander Aring
This patch removes tabs after define in hardware flags declarations. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac802154: main: remove unnecessary includeAlexander Aring
This patch removes an unnecessary include of driver-ops header file. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac80211-hwsim: remove spurious newlineJohannes Berg
This newline shouldn't be there, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29mac80211-hwsim: support SGI-20Ben Greear
This lets hostapd start if you have SGI-20 configured as one of your HT capabilities. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29cfg80211: fix integer signedness in chandef_primary_freqs()Johannes Berg
The helper function can't ever create negative values, so use u32 pointers as the function arguments as the caller does. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29cfg80211: fix set but not used warning in nl80211_channel_switch()Fabian Frederick
radar_detect_width is unused since commit 97dc94f1d933 ("cfg80211: remove channel_switch combination check") Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29mac80211-hwsim: add frequency attribute to netlink pktsBen Greear
Add frequency attribute when sending to user-space over netlink socket. The frequency is currently ignored when receiving from user-space. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29MAINTAINERS: add cc2520 driver maintainerVarka Bhadram
This patch adds maintainer for cc2520 radio driver Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29mac80211-hwsim: Rename CREATE and DESTROY radio to NEW and DEL radioJukka Rissanen
Using the name HWSIM_CMD_NEW_RADIO and HWSIM_CMD_DEL_RADIO is more fitting on how other pieces of the wireless system work. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-29Bluetooth: Wrong style spin lock usedJukka Rissanen
Use spin_lock_bh() as the code is called from softirq in networking subsystem. This is needed to prevent deadlocks when 6lowpan link is in use. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-29iwlwifi: mvm: unref SCAN ref on scan completionEliad Peller
The scan reference wasn't released in case of offloaded scan, causing the refcount to go wrong and prevent the device from going into d0i3. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: rs: add Tx STBC supportEyal Shapira
STBC is enabled on HT/VHT SISO rates in case we don't care about power consumption and it won't hurt BT. This is done only in case the peer and our chip support STBC of course. While at it fixed a bug which was causing bw and ldpc flags to be set incorrectly in the rate scale table in case we are switching to a legacy Tx column. This had no real impact. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: fix scan condition iteratorDavid Spinadel
Scan condition iterator assumes that an interface is associated if phy_ctxt is assigned, but this isn't the sutuation in P2P device. OTOH P2P device is never associated so we can simply ignore it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: port to devcoredump frameworkJohannes Berg
iwlwifi features a debug mechanism that allows to dump binary data which is helpful to debug the firmware. Until now, this data was made available for the userspace through debugfs. For this exact purpose, devcoredump was created. Move to the new infrastructure. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: enable STBC support for 8000 chipsEyal Shapira
These chips support STBC in both Tx and Rx. Given that we've added STBC Tx support enable it. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: dvm: Fix probable mask then right shift defectJoe Perches
Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. Add parentheses around the mask. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2014-10-29iwlwifi: mvm: remove unnecessary includes in tt.cLuciano Coelho
We used to need to include some headers in order to read the registers and do all the calculations by ourselves, but this is not done anymore (i.e. we let the firmware do this for us), so we don't need to include those headers anymore. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 16:02:30 +0000