summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-11drm/nouveau/fifo/gk104: fix engine status register offsetVince Hsu
The offset should be 8 on Kepler and later. Signed-off-by: Vince Hsu <vinceh@nvidia.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-01-11drm/nouveau/ce/gk104: attempt at better handling of LAUNCHERRBen Skeggs
Very rough, no idea how correct it is at this point, but it prevents getteximage-depth from piglit from hanging the GPU. v2: updated with NV_PCE_FE_LAUNCHERR_REPORT values provided by NVIDIA Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-01-11drm/nouveau/fifo/gf100: fix race condition when updating engine runlistsBen Skeggs
Similar in spirit to the gk104 fix with a similar title. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-01-11drm/nouveau/fifo/gk104: fix race condition when updating engine runlistsBen Skeggs
The CPU-side tracking of engine runlists was not protected by a lock, leading to list corruption, eventually causing runlist_update() to overrun the GPU-side runlist, triggering an OOPS. Fixes some of the issues noticed during parallel piglit runs. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-01-11drm/nouveau/nvkm: add/remove 0's to make 7 (or 9)-nibble constants use 8 nibblesIlia Mirkin
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-01-11drm/nouveau/kms: no need to check for empty edid before drm_detect_hdmi_monitorIlia Mirkin
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-01-11drm/nouveau/core: fix return in error path of device probeAlexandre Courbot
We want to unlock nv_devices_mutex in this error path as well. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-01-11drm/nouveau/kms: allow 225/297MHz pixel clocks for HDMI on Fermi/KeplerIlia Mirkin
Some Fermi's apparently alow allow 297MHz clocks, so create a parameter which allows end-users to set it themselves until we have a reliable way to determine the board's maximum pixel clocks. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-01-11drm/nouveau/disp: activate dual link TMDS links only when possibleHauke Mehrtens
Without this patch a pixel clock rate above 165 MHz on a TMDS link is assumed to be dual link. This is true for DVI, but not for HDMI. HDMI supports no dual link, but it supports pixel clock rates above 165 MHz. Only activate Dual Link mode when it is actually possible and requested. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [imirkin: check for hdmi monitor for computing proto, use sor ctrl to enable extra config bit] Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2016-01-11Merge branch 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Misc fixes for amdgpu and radeon for 4.5. The bulk of the changes are smatch fixes and cleanups. This also includes the DP MST fixes from Mykola. Beyond that some fixes from Christian to avoid -ENOMEM errors in some corner cases in the CS ioctl, some suspend and resume fixes, and some powerplay fixes. * 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux: (33 commits) drm/radeon: fix trivial typo in warning message radeon: r100: Silence 'may be used uninitialized' warnings drm/amdgpu: add warning to amdgpu_bo_gpu_offset() v2 drm/amd/powerplay: implement power down asic task for CZ drm/amd/powerplay: enable power down asic task. (v2) drm/amd/powerplay: enable set boot state task drm/amd/powerplay: add thermal control task when resume. drm/amdgpu: fix hex/decimal bug when show gpu load. drm/amdgpu: Show gpu load when display gpu performance for Fiji of VI. drm/amdgpu: Show gpu load when display gpu performance for Ci. drm/amd/powerplay: Reload and initialize the smc firmware on powerplay resume. drm/amd/powerplay: add powerplay valid check to avoid null point. (v2) drm/amd/powerplay: fix Smatch static checker warnings drm/amd/powerplay: fix Smatch static checker warnings with indenting (v2) drm/amd/powerplay: fix bug that NULL checks are reversed. amdgpu/dce11: Add test for crtc < 0 to various DCEv11 functions amdgpu/dce11: Remove division from dce_v11_0_vblank_wait() amdgpu/vce3: Simplify vce_v3_0_hw_init and ensure both rings default to not ready. amdgpu/vce3: Remove magic constants from harvest register masks. amdgpu/vce3: Simplify vce_v3_0_process_interrupt() ...
2016-01-08drm/radeon: fix trivial typo in warning messageAlexandre Demers
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08radeon: r100: Silence 'may be used uninitialized' warningsTim Gardner
CC [M] drivers/gpu/drm/radeon/r100.o In file included from drivers/gpu/drm/radeon/radeon_mode.h:37:0, from drivers/gpu/drm/radeon/radeon.h:80, from drivers/gpu/drm/radeon/r100.c:33: drivers/gpu/drm/radeon/r100.c: In function 'r100_bandwidth_update': include/drm/drm_fixed.h:64:13: warning: 'crit_point_ff.full' may be used uninitialized in this function [-Wmaybe-uninitialized] u64 tmp = ((u64)A.full << 13); ^ drivers/gpu/drm/radeon/r100.c:3153:63: note: 'crit_point_ff.full' was declared here fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff; ^ drivers/gpu/drm/radeon/r100.c:3583:42: warning: 'disp_drain_rate.full' may be used uninitialized in this function [-Wmaybe-uninitialized] temp_ff.full = read_return_rate.full - disp_drain_rate.full; gcc version 5.3.1 20151219 (Ubuntu 5.3.1-4ubuntu1) Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amdgpu: add warning to amdgpu_bo_gpu_offset() v2Christian König
Check if there really is a valid offset for the BO. v2: user WARN_ON_ONCE Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amd/powerplay: implement power down asic task for CZRex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amd/powerplay: enable power down asic task. (v2)Rex Zhu
v2: AGD: rebase on upstream Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amd/powerplay: enable set boot state taskRex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amd/powerplay: add thermal control task when resume.Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amdgpu: fix hex/decimal bug when show gpu load.Rex Zhu
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amdgpu: Show gpu load when display gpu performance for Fiji of VI.Rex Zhu
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amdgpu: Show gpu load when display gpu performance for Ci.Rex Zhu
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amd/powerplay: Reload and initialize the smc firmware on powerplay resume.Rex Zhu
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amd/powerplay: add powerplay valid check to avoid null point. (v2)Rex Zhu
In case CONFIG_DRM_AMD_POWERPLAY is defined and amdgpu.powerplay=0. some functions in powrplay can also be called by DAL. and the input parameter is *adev. if just check point not NULL was not enough and will lead to NULL point error. V2: AGD: rebase on upstream Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amd/powerplay: fix Smatch static checker warningsRex Zhu
1. return -1 instead of -ENOMEM 2. The struct type mismatch warnings. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amd/powerplay: fix Smatch static checker warnings with indenting (v2)Rex Zhu
v2: AGD: rebase on upstream Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm/amd/powerplay: fix bug that NULL checks are reversed.Rex Zhu
&& was used instead of ||. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-08drm: move MODULE_PARM_DESC to other fileDan Carpenter
We moved the module options from drm_drv.c to drm_irq.c in 18882995713d ('drm: Move vblank related module options into drm_irq.c'). Let's move the MODULE_PARM_DESC()s as well so they're together. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160108110045.GF32195@mwanda Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-08drm/edid: index CEA/HDMI mode tables using the VICJani Nikula
Add a dummy entry to CEA/HDMI mode tables so they can be indexed directly using the VIC, avoiding a +1/-1 dance here and there. This adds clarity to the error checking for various functions that return the VIC on success and zero on failure; we can now explicitly check for 0 instead of just subtracting one from an unsigned type. Also add drm_valid_cea_vic() and drm_valid_hdmi_vic() helpers for checking valid VICs. v2: add drm_valid_cea_vic and drm_valid_hdmi_vic helpers (Ville) use { } instead of { 0 } for initializing the dummy modes Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452252111-6439-1-git-send-email-jani.nikula@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-07drm/etnaviv: fix workaround for GC500Lucas Stach
The hardware description macros define the mask and shifts the wrong way around for the intended use, leading to the condition never being true and the chip revision ending up with the wrong value. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2016-01-06drm/atomic: Remove drm_atomic_connectors_for_crtc.Maarten Lankhorst
Now that connector_mask is reliable there's no need for this function any more. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451908400-25147-6-git-send-email-maarten.lankhorst@linux.intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-06drm/i915: Update connector_mask during readout, v2.Maarten Lankhorst
drm/i915: Update connector_mask during readout, v2. The connector_mask may be used any time during the non-atomic .crtc_disable which is called before the full atomic state is set up and needs to be accurate for that reason. Changes since v1: - Update connector_mask in readout_hw_state and add a comment. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/568D1C55.8010001@linux.intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-06drm/etnaviv: unlock on error in etnaviv_gem_get_iova()Dan Carpenter
We have to drop a lock before returning -ENOMEM here. Fixes: a8c21a5451d8 ('drm/etnaviv: add initial etnaviv DRM driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-06drm: rockchip: Support Synopsys DW MIPI DSIChris Zhong
Add support for Synopsys DesignWare MIPI DSI controller which is embedded in the rk3288 SoCs. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Acked-by: Mark Yao <mark.yao@rock-chips.com>
2016-01-06Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driverChris Zhong
add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver Signed-off-by: Chris Zhong <zyw@rock-chips.com> Acked-by: Rob Herring <robh@kernel.org>
2016-01-06drm/rockchip: return a true clock rate to adjusted_modeChris Zhong
Since the mipi dsi driver need to use the clock of vop to make the calculation of Blanking. But sometimes the clock driver can not set a accurate clock_rate for vop, get it by clk_round_rate before mode_set, so we can get the true value. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Acked-by: Mark Yao <mark.yao@rock-chips.com>
2016-01-05drm: Remove opencoded drm_gem_object_release_handle()Chris Wilson
drm_gem_handle_delete() contains its own version of drm_gem_object_release_handle(), so lets just call the release method instead. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451986951-3703-2-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-05drm: Do not set outparam on error during GEM handle allocationChris Wilson
Good practice dictates that we do not leak stale information to our callers, and should avoid overwriting an outparam on an error path. Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451986951-3703-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-05drm/docs: more leftovers from the big vtable documentation pileDaniel Vetter
Another pile of vfuncs from the old gpu.tmpl xml documentation that I've forgotten to delete. I spotted a few more things to clarify/extend in the new kerneldoc while going through this once more. v2: Spelling fixes (Thierry). v3: More spelling fixes and use Thierry's proposal to clarify why drivers need to validate modes both in ->mode_fixup and ->mode_valid. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-01-05drm/atomic-helper: Reject legacy flips on a disabled pipeDaniel Vetter
We want this for consistency with existing page_flip semantics. Since this spurred quite a discussion on IRC also document why we reject event generation when the pipe is off: It's not that it's hard to implement, but userspace has a track recording which proves that it's way too easy to accidentally abuse and cause havoc. We want to make sure userspace doesn't get away with that. v2: Somehow thought we do reject events already, but that code only existed in my imagination ... Also suggestions from Thierry. Cc: Daniel Stone <daniels@collabora.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Daniel Stone <daniels@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449564561-3896-4-git-send-email-daniel.vetter@ffwll.ch
2016-01-05drm/atomic: add connector mask to drm_crtc_state.Maarten Lankhorst
It can be useful to iterate over connectors without grabbing connection_mutex. It can also be used to see how many connectors are on a crtc without iterating over the list. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451908400-25147-4-git-send-email-maarten.lankhorst@linux.intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-05drm/tegra: Use __drm_atomic_helper_reset_connector for subclassing connector ↵Maarten Lankhorst
state, v2. Changes since v1: - Do not reset if state allocation fails. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> #irc Link: http://patchwork.freedesktop.org/patch/msgid/1451908400-25147-3-git-send-email-maarten.lankhorst@linux.intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-05drm/atomic: Add __drm_atomic_helper_connector_reset, v2.Maarten Lankhorst
This is useful for drivers that subclass connector_state, like tegra. Changes since v1: - Docbook updates. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451908400-25147-2-git-send-email-maarten.lankhorst@linux.intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-05drm/i915: Set connector_state->connector using the helper.Maarten Lankhorst
The atomic helper sets connector_state->connector, which the i915 code didn't. This will become a problem when we start using it. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451908400-25147-1-git-send-email-maarten.lankhorst@linux.intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-05drm: Use a normal idr allocation for the obj->nameChris Wilson
Unlike the handle, the name table uses a sleeping mutex rather than a spinlock. The allocation is in a normal context, and we can use the simpler sleeping gfp_t, rather than have to take from the atomic reserves. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451902261-25380-3-git-send-email-chris@chris-wilson.co.uk Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-05drm: Only bump object-reference count when adding first handleChris Wilson
We only need a single reference count for all handles (i.e. non-zero obj->handle_count) and so can trim a few atomic operations by only taking the reference on the first handle and dropping it after the last. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1451902261-25380-2-git-send-email-chris@chris-wilson.co.uk Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-05drm: Balance error path for GEM handle allocationChris Wilson
The current error path for failure when establishing a handle for a GEM object is unbalance, e.g. we call object_close() without calling first object_open(). Use the typical onion structure to only undo what has been set up prior to the error. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-04amdgpu/dce11: Add test for crtc < 0 to various DCEv11 functionsTom St Denis
To be consistent with other DCE11 functions test for crtc < 0. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-04amdgpu/dce11: Remove division from dce_v11_0_vblank_wait()Tom St Denis
Mimics odd behaviour where (i++ % 100 == 0) is true in the first iteration of each loop... Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-04amdgpu/vce3: Simplify vce_v3_0_hw_init and ensure both rings default to not ↵Tom St Denis
ready. Simplified the ring test and added logic to ensure rings are marked not ready by default. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2016-01-04amdgpu/vce3: Remove magic constants from harvest register masks.Tom St Denis
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-04amdgpu/vce3: Simplify vce_v3_0_process_interrupt()Tom St Denis
Fold two cases into one for a LOC reduction. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 21:16:05 +0000