summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-06-16scsi: ufs: ufs-mediatek: Prevent device regulators setting LPM incorrectlyPo-Wen Kao
Device regulatrs are allowed to enter low-power mode if neither device is not in active mode, nor VCC does not keep on. Fix this by adding conditions before LPM decision. Link: https://lore.kernel.org/r/20220616053725.5681-6-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: ufs-mediatek: Fix the timing of configuring device regulatorsPo-Wen Kao
Currently the LPM configurations of device regulators may not work since VCC is not disabled yet while ufs_mtk_vreg_set_lpm() is executed. Fix this by changing the timing of invoking ufs_mtk_vreg_set_lpm(). Link: https://lore.kernel.org/r/20220616053725.5681-5-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: ufs-mediatek: Introduce workaround for power mode changeCC Chou
Some MediaTek SoC chips need special flow for power mode change, especially for chips supporting HS-G5. Enable the workaround by setting the host-specific capability. Link: https://lore.kernel.org/r/20220616053725.5681-4-stanley.chu@mediatek.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: CC Chou <cc.chou@mediatek.com> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Signed-off-by: Dennis Yu <tun-yu.yu@mediatek.com> Signed-off-by: Peter Wang <peter.want@medaitek.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Fix ADAPT logic for HS-G5Stanley Chu
ADAPT now is added not only for HS Gear4 mode but also higher gears. Fix the logic for higher gears. Link: https://lore.kernel.org/r/20220616053725.5681-3-stanley.chu@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Export ufshcd_uic_change_pwr_mode()Stanley Chu
Export ufshcd_uic_change_pwr_mode() to allow vendors to use it for SoC-specific power mode change design limitations. Link: https://lore.kernel.org/r/20220616053725.5681-2-stanley.chu@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Update version to 10.02.07.700-kNilesh Javali
Link: https://lore.kernel.org/r/20220616053508.27186-12-njavali@marvell.com Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Fix erroneous mailbox timeout after PCI error injectionQuinn Tran
Clear wait for mailbox interrupt flag to prevent stale mailbox: Feb 22 05:22:56 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-500a:4: LOOP UP detected (16 Gbps). Feb 22 05:22:59 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-d04c:4: MBX Command timeout for cmd 69, ... To fix the issue, driver needs to clear the MBX_INTR_WAIT flag on purging the mailbox. When the stale mailbox completion does arrive, it will be dropped. Link: https://lore.kernel.org/r/20220616053508.27186-11-njavali@marvell.com Fixes: b6faaaf796d7 ("scsi: qla2xxx: Serialize mailbox request") Cc: Naresh Bannoth <nbannoth@in.ibm.com> Cc: Kyle Mahlkuch <Kyle.Mahlkuch@ibm.com> Cc: stable@vger.kernel.org Reported-by: Naresh Bannoth <nbannoth@in.ibm.com> Tested-by: Naresh Bannoth <nbannoth@in.ibm.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Fix losing FCP-2 targets on long port disable with I/OsArun Easi
FCP-2 devices were not coming back online once they were lost, login retries exhausted, and then came back up. Fix this by accepting RSCN when the device is not online. Link: https://lore.kernel.org/r/20220616053508.27186-10-njavali@marvell.com Fixes: 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target") Cc: stable@vger.kernel.org Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Add debug prints in the device remove pathArun Easi
Add a debug print in the devloss callback. Link: https://lore.kernel.org/r/20220616053508.27186-9-njavali@marvell.com Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Fix losing target when it reappears during deleteArun Easi
FC target disappeared during port perturbation tests due to a race that tramples target state. Fix the issue by adding state checks before proceeding. Link: https://lore.kernel.org/r/20220616053508.27186-8-njavali@marvell.com Fixes: 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target") Cc: stable@vger.kernel.org Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Fix losing FCP-2 targets during port perturbation testsArun Easi
When a mix of FCP-2 (tape) and non-FCP-2 targets are present, FCP-2 target state was incorrectly transitioned when both of the targets were gone. Fix this by ignoring state transition for FCP-2 targets. Link: https://lore.kernel.org/r/20220616053508.27186-7-njavali@marvell.com Fixes: 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target") Cc: stable@vger.kernel.org Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Fix crash due to stale SRB access around I/O timeoutsArun Easi
Ensure SRB is returned during I/O timeout error escalation. If that is not possible fail the escalation path. Following crash stack was seen: BUG: unable to handle kernel paging request at 0000002f56aa90f8 IP: qla_chk_edif_rx_sa_delete_pending+0x14/0x30 [qla2xxx] Call Trace: ? qla2x00_status_entry+0x19f/0x1c50 [qla2xxx] ? qla2x00_start_sp+0x116/0x1170 [qla2xxx] ? dma_pool_alloc+0x1d6/0x210 ? mempool_alloc+0x54/0x130 ? qla24xx_process_response_queue+0x548/0x12b0 [qla2xxx] ? qla_do_work+0x2d/0x40 [qla2xxx] ? process_one_work+0x14c/0x390 Link: https://lore.kernel.org/r/20220616053508.27186-6-njavali@marvell.com Fixes: d74595278f4a ("scsi: qla2xxx: Add multiple queue pair functionality.") Cc: stable@vger.kernel.org Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Turn off multi-queue for 8G adaptersQuinn Tran
For 8G adapters, multi-queue was enabled accidentally. Make sure multi-queue is not enabled. Link: https://lore.kernel.org/r/20220616053508.27186-5-njavali@marvell.com Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Wind down adapter after PCIe errorQuinn Tran
Put adapter into a wind down state if OS does not make any attempt to recover the adapter after PCIe error. Link: https://lore.kernel.org/r/20220616053508.27186-4-njavali@marvell.com Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Add a new v2 dport diagnostic featureBikash Hazarika
FW requires minimum 72 bytes buffer size for D_port result. Buffer size 1024 is mentioned in the FW spec so buffer size is increased to 1024. Rewrite the logic to handle START/RESTART command from SDMAPI. Link: https://lore.kernel.org/r/20220616053508.27186-3-njavali@marvell.com Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: qla2xxx: Fix excessive I/O error messages by defaultArun Easi
Disable printing I/O error messages by default. The messages will be printed only when logging was enabled. Link: https://lore.kernel.org/r/20220616053508.27186-2-njavali@marvell.com Fixes: 8e2d81c6b5be ("scsi: qla2xxx: Fix excessive messages during device logout") Cc: stable@vger.kernel.org Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: iscsi: Prefer xmit of DataOut over new commandsDmitry Bogdanov
iscsi_data_xmit() (TX worker) is iterating over the queue of new SCSI commands concurrently with the queue being replenished. Only after the queue is emptied will we start sending pending DataOut PDUs. That leads to DataOut timeout on the target side and to connection reinstatement. Give priority to pending DataOut commands over new commands. Link: https://lore.kernel.org/r/20220607131953.11584-1-d.bogdanov@yadro.com Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Rearrange addresses in increasing orderAlim Akhtar
Rearrange all the unipro and mphy addresses in their increasing order. Link: https://lore.kernel.org/r/20220615121204.16642-3-alim.akhtar@samsung.com Reviewed-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: host: ufs-exynos: Use already existing definitionAlim Akhtar
UFS core already uses RX_MIN_ACTIVATETIME_CAPABILITY macro, let's use the same in driver as well instead of having a different macro name for the same offset. Link: https://lore.kernel.org/r/20220615121204.16642-2-alim.akhtar@samsung.com Reviewed-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: host: ufs-exynos: Remove unused definesAlim Akhtar
Remove #defines as those are not used anywhere in the driver file. Link: https://lore.kernel.org/r/20220615121204.16642-1-alim.akhtar@samsung.com Reviewed-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: pm8001: Expose hardware queues for pm80xxJohn Garry
In commit 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues"), support for 80xx chip was improved by enabling multiple HW queues. In this, like other SCSI MQ HBA drivers at the time, the HW queues were not exposed to upper layer, and instead the driver managed the queues internally. However, this management duplicates blk-mq code. In addition, the HW queue management is sub-optimal for a system where the number of CPUs exceeds the HW queues - this is because queues are selected in a round-robin fashion, when it would be better to make adjacent CPUs submit on the same queue. And finally, the affinity of the completion queue interrupts is not set to mirror the cpu<->HQ queue mapping, which is suboptimal. As such, for when MSIX is supported, expose HW queues to upper layer. We always use queue index #0 for "internal" commands, i.e. anything which does not come from the block layer, so omit this from the affinity spreading. Link: https://lore.kernel.org/r/1654879602-33497-5-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: pm8001: Use non-atomic bitmap ops for tag alloc + freeJohn Garry
In pm8001_tag_alloc() we don't require atomic set_bit() as we are already in atomic context. In pm8001_tag_free() we should use the same host spinlock to protect clearing the tag (and then don't require the atomic clear_bit()). Link: https://lore.kernel.org/r/1654879602-33497-4-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: pm8001: Set up tags before using themJohn Garry
The current code is buggy in that the tags are set up after they are needed in pm80xx_chip_init() -> pm80xx_set_sas_protocol_timer_config(). The tag depth is earlier read in pm80xx_chip_init() -> read_main_config_table(). Add a post init callback to do the pm80xx work which needs to be done after reading the tags. I don't see a better way to do this. Link: https://lore.kernel.org/r/1654879602-33497-3-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: pm8001: Rework shost initial valuesJohn Garry
Some values in pm8001_prep_sas_ha_init() are set the same as they would be set in scsi_host_alloc(), or could be in the sht (which would be better), or later just overwritten, so rework the following: - cmd_per_lun can be set in the sht - max_lun and max_channel are as scsi_host_alloc() (so no need to set) - can_queue is later overwritten (so don't set in pm8001_prep_sas_ha_init()) Link: https://lore.kernel.org/r/1654879602-33497-2-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ibmvfc: Store vhost pointer during subcrq allocationTyrel Datwyler
Currently the back pointer from a queue to the vhost adapter isn't set until after subcrq interrupt registration. The value is available when a queue is first allocated and can/should be also set for primary and async queues as well as subcrqs. This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS interrupt controller where a pending subcrq interrupt from the previous kernel can be replayed immediately upon IRQ registration resulting in dereference of a garbage backpointer in ibmvfc_interrupt_scsi(). Kernel attempted to read user page (58) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000058 Faulting instruction address: 0xc008000003216a08 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc] LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 Call Trace: [c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable) [c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 [c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188 [c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310 [c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80 [c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0 [c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130 [c000000014622f60] [0000000020000000] 0x20000000 [c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0 [c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0 [c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170 [c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0 [c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0 [c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230 [c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc] [c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc] [c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc] [c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc] [c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc] Link: https://lore.kernel.org/r/20220616191126.1281259-2-tyreld@linux.ibm.com Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels") Cc: stable@vger.kernel.org Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ibmvfc: Allocate/free queue resource only during probe/removeTyrel Datwyler
Currently, the sub-queues and event pool resources are allocated/freed for every CRQ connection event such as reset and LPM. This exposes the driver to a couple issues. First the inefficiency of freeing and reallocating memory that can simply be resued after being sanitized. Further, a system under memory pressue runs the risk of allocation failures that could result in a crippled driver. Finally, there is a race window where command submission/compeletion can try to pull/return elements from/to an event pool that is being deleted or already has been deleted due to the lack of host state around freeing/allocating resources. The following is an example of list corruption following a live partition migration (LPM): Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: vfat fat isofs cdrom ext4 mbcache jbd2 nft_counter nft_compat nf_tables nfnetlink rpadlpar_io rpaphp xsk_diag nfsv3 nfs_acl nfs lockd grace fscache netfs rfkill bonding tls sunrpc pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c dm_service_time sd_mod t10_pi sg ibmvfc scsi_transport_fc ibmveth vmx_crypto dm_multipath dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse CPU: 0 PID: 2108 Comm: ibmvfc_0 Kdump: loaded Not tainted 5.14.0-70.9.1.el9_0.ppc64le #1 NIP: c0000000007c4bb0 LR: c0000000007c4bac CTR: 00000000005b9a10 REGS: c00000025c10b760 TRAP: 0700 Not tainted (5.14.0-70.9.1.el9_0.ppc64le) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 2800028f XER: 0000000f CFAR: c0000000001f55bc IRQMASK: 0 GPR00: c0000000007c4bac c00000025c10ba00 c000000002a47c00 000000000000004e GPR04: c0000031e3006f88 c0000031e308bd00 c00000025c10b768 0000000000000027 GPR08: 0000000000000000 c0000031e3009dc0 00000031e0eb0000 0000000000000000 GPR12: c0000031e2ffffa8 c000000002dd0000 c000000000187108 c00000020fcee2c0 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c008000002f81300 GPR24: 5deadbeef0000100 5deadbeef0000122 c000000263ba6910 c00000024cc88000 GPR28: 000000000000003c c0000002430a0000 c0000002430ac300 000000000000c300 NIP [c0000000007c4bb0] __list_del_entry_valid+0x90/0x100 LR [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 Call Trace: [c00000025c10ba00] [c0000000007c4bac] __list_del_entry_valid+0x8c/0x100 (unreliable) [c00000025c10ba60] [c008000002f42284] ibmvfc_free_queue+0xec/0x210 [ibmvfc] [c00000025c10bb10] [c008000002f4246c] ibmvfc_deregister_scsi_channel+0xc4/0x160 [ibmvfc] [c00000025c10bba0] [c008000002f42580] ibmvfc_release_sub_crqs+0x78/0x130 [ibmvfc] [c00000025c10bc20] [c008000002f4f6cc] ibmvfc_do_work+0x5c4/0xc70 [ibmvfc] [c00000025c10bce0] [c008000002f4fdec] ibmvfc_work+0x74/0x1e8 [ibmvfc] [c00000025c10bda0] [c0000000001872b8] kthread+0x1b8/0x1c0 [c00000025c10be10] [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 40820034 38600001 38210060 4e800020 7c0802a6 7c641b78 3c62fe7a 7d254b78 3863b590 f8010070 4ba309cd 60000000 <0fe00000> 7c0802a6 3c62fe7a 3863b640 ---[ end trace 11a2b65a92f8b66c ]--- ibmvfc 30000003: Send warning. Receive queue closed, will retry. Add registration/deregistration helpers that are called instead during connection resets to sanitize and reconfigure the queues. Link: https://lore.kernel.org/r/20220616191126.1281259-3-tyreld@linux.ibm.com Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels") Cc: stable@vger.kernel.org Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: storvsc: Correct reporting of Hyper-V I/O size limitsSaurabh Sengar
Current code is based on the idea that the max number of SGL entries also determines the max size of an I/O request. While this idea was true in older versions of the storvsc driver when SGL entry length was limited to 4 Kbytes, commit 3d9c3dcc58e9 ("scsi: storvsc: Enable scatterlist entry lengths > 4Kbytes") removed that limitation. It's now theoretically possible for the block layer to send requests that exceed the maximum size supported by Hyper-V. This problem doesn't currently happen in practice because the block layer defaults to a 512 Kbyte maximum, while Hyper-V in Azure supports 2 Mbyte I/O sizes. But some future configuration of Hyper-V could have a smaller max I/O size, and the block layer could exceed that max. Fix this by correctly setting max_sectors as well as sg_tablesize to reflect the maximum I/O size that Hyper-V reports. While allowing I/O sizes larger than the block layer default of 512 Kbytes doesn’t provide any noticeable performance benefit in the tests we ran, it's still appropriate to report the correct underlying Hyper-V capabilities to the Linux block layer. Also tweak the virt_boundary_mask to reflect that the required alignment derives from Hyper-V communication using a 4 Kbyte page size, and not on the guest page size, which might be bigger (eg. ARM64). Link: https://lore.kernel.org/r/1655190355-28722-1-git-send-email-ssengar@linux.microsoft.com Fixes: 3d9c3dcc58e9 ("scsi: storvsc: Enable scatter list entry lengths > 4Kbytes") Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Fix a race between the interrupt handler and the reset handlerBart Van Assche
Prevent that both the interrupt handler and the reset handler try to complete a request at the same time. This patch is the result of an analysis of the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE 5.10.107-android13-4-00051-g1e48e8970cca-ab8664745 #1 pc : ufshcd_release_scsi_cmd+0x30/0x46c lr : __ufshcd_transfer_req_compl+0x4fc/0x9c0 Call trace: ufshcd_release_scsi_cmd+0x30/0x46c __ufshcd_transfer_req_compl+0x4fc/0x9c0 ufshcd_poll+0xf0/0x208 ufshcd_sl_intr+0xb8/0xf0 ufshcd_intr+0x168/0x2f4 __handle_irq_event_percpu+0xa0/0x30c handle_irq_event+0x84/0x178 handle_fasteoi_irq+0x150/0x2e8 __handle_domain_irq+0x114/0x1e4 gic_handle_irq.31846+0x58/0x300 el1_irq+0xe4/0x1c0 cpuidle_enter_state+0x3ac/0x8c4 do_idle+0x2fc/0x55c cpu_startup_entry+0x84/0x90 kernel_init+0x0/0x310 start_kernel+0x0/0x608 start_kernel+0x4ec/0x608 Link: https://lore.kernel.org/r/20220613214442.212466-4-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Support clearing multiple commands at onceBart Van Assche
Modify ufshcd_clear_cmd() such that it supports clearing multiple commands at once instead of one command at a time. This change will be used in a later patch to reduce the time spent in the reset handler. Link: https://lore.kernel.org/r/20220613214442.212466-3-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: Simplify ufshcd_clear_cmd()Bart Van Assche
Remove the local variable 'err'. This patch does not change any functionality. Link: https://lore.kernel.org/r/20220613214442.212466-2-bvanassche@acm.org Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: ufs: exynos: Constify driver dataKrzysztof Kozlowski
Constify the drv data because it should not be modified (used by multiple devices). Link: https://lore.kernel.org/r/20220613101429.114449-1-krzysztof.kozlowski@linaro.org Reviewed-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: lpfc: Use memset_startat() helper in lpfc_nvmet_xmt_fcp_op_cmp()Xiu Jianfeng
Use memset_startat() helper to simplify the code, no functional changes. Link: https://lore.kernel.org/r/20220613021851.59699-1-xiujianfeng@huawei.com Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-16scsi: target: iscsi: Fix NULL pointer dereference in iscsi_conn_auth_required()Yang Li
Fix following coccicheck error: ./drivers/target/iscsi/iscsi_target_nego.c:831:13-26: ERROR: se_nacl is NULL but dereferenced. Link: https://lore.kernel.org/r/20220613014321.107045-1-yang.lee@linux.alibaba.com Fixes: a75fcb0912a5 ("scsi: target: iscsi: Extract auth functions") Reported-by: Abaci Robot <abaci@linux.alibaba.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: iscsi: Exclude zero from the endpoint ID rangeSergey Gorenko
The kernel returns an endpoint ID as r.ep_connect_ret.handle in the iscsi_uevent. The iscsid validates a received endpoint ID and treats zero as an error. The commit referenced in the fixes line changed the endpoint ID range, and zero is always assigned to the first endpoint ID. So, the first attempt to create a new iSER connection always fails. Link: https://lore.kernel.org/r/20220613123854.55073-1-sergeygo@nvidia.com Fixes: 3c6ae371b8a1 ("scsi: iscsi: Release endpoint ID when its freed") Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Sergey Gorenko <sergeygo@nvidia.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: MAINTAINERS: Add maintainer for Renesas UFS driverYoshihiro Shimoda
Add maintainer for Renesas UFS driver. Link: https://lore.kernel.org/r/20220603110524.1997825-6-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: ufs: ufs-renesas: Add support for Renesas R-Car UFS controllerYoshihiro Shimoda
Add support for Renesas R-Car UFS controller which needs vendor-specific initialization. Link: https://lore.kernel.org/r/20220603110524.1997825-5-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: ufs: core: Add UFSHCD_QUIRK_HIBERN_FASTAUTOYoshihiro Shimoda
Add UFSHCD_QUIRK_HIBERN_FASTAUTO quirk for host controllers which supports auto-hibernate the capability but only FASTAUTO mode. Link: https://lore.kernel.org/r/20220603110524.1997825-4-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: ufs: core: Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESSYoshihiro Shimoda
Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS for host controllers which do not support 64-bit addressing. Link: https://lore.kernel.org/r/20220603110524.1997825-3-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: dt-bindings: ufs: Document Renesas R-Car UFS host controllerYoshihiro Shimoda
Document Renesas R-Car UFS host controller for R-Car S4-8 (r8a779f0). Link: https://lore.kernel.org/r/20220603110524.1997825-2-yoshihiro.shimoda.uh@renesas.com Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: ufs: host: ufs-exynos: Add support for FSD UFS HCIAlim Akhtar
Adds support of UFS HCI which is found in Tesla Full Self-Driving (FSD) SoC. Link: https://lore.kernel.org/r/20220610104119.66401-7-alim.akhtar@samsung.com Co-developed-by: Bharat Uppal <bharat.uppal@samsung.com> Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: ufs: host: ufs-exynos: Add mphy apb clock maskAlim Akhtar
Bit[3] of HCI_CLKSTOP_CTRL register is for enabling/disabling MPHY APB clock. Lets add it to CLK_STOP_MASK, so that the same can be controlled during clock masking/unmasking. Link: https://lore.kernel.org/r/20220610104119.66401-6-alim.akhtar@samsung.com Tested-by: Chanho Park <chanho61.park@samsung.com> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-13scsi: dt-bindings: ufs: exynos-ufs: Add FSD compatibleAlim Akhtar
Adds tesla,fsd-ufs compatible for Tesla FSD SoC. Link: https://lore.kernel.org/r/20220610104119.66401-5-alim.akhtar@samsung.com Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Co-developed-by: Bharat Uppal <bharat.uppal@samsung.com> Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-10scsi: libsas: Introduce struct smp_rps_respDamien Le Moal
Similarly to sas report general and discovery responses, define the structure struct smp_rps_resp to handle SATA PHY report responses using a structure with a size that is exactly equal to the sas defined response size. With this change, struct smp_resp becomes unused and is removed. Link: https://lore.kernel.org/r/20220609022456.409087-4-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-10scsi: libsas: Introduce struct smp_rg_respDamien Le Moal
When compiling with gcc 12, several warnings are thrown by gcc when compiling drivers/scsi/libsas/sas_expander.c, e.g.: In function ‘sas_get_ex_change_count’, inlined from ‘sas_find_bcast_dev’ at drivers/scsi/libsas/sas_expander.c:1816:8: drivers/scsi/libsas/sas_expander.c:1781:20: warning: array subscript ‘struct smp_resp[0]’ is partly outside array bounds of ‘unsigned char[32]’ [-Warray-bounds] 1781 | if (rg_resp->result != SMP_RESP_FUNC_ACC) { | ~~~~~~~^~~~~~~~ This is due to the use of the struct smp_resp to aggregate all possible response types using a union but allocating a response buffer with a size exactly equal to the size of the response type needed. This leads to access to fields of struct smp_resp from an allocated memory area that is smaller than the size of struct smp_resp. Fix this by defining struct smp_rg_resp for sas report general responses. Link: https://lore.kernel.org/r/20220609022456.409087-3-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-10scsi: libsas: Introduce struct smp_disc_respDamien Le Moal
When compiling with gcc 12, several warnings are thrown by gcc when compiling drivers/scsi/libsas/sas_expander.c, e.g.: In function ‘sas_get_phy_change_count’, inlined from ‘sas_find_bcast_phy.constprop’ at drivers/scsi/libsas/sas_expander.c:1737:9: drivers/scsi/libsas/sas_expander.c:1697:39: warning: array subscript ‘struct smp_resp[0]’ is partly outside array bounds of ‘unsigned char[56]’ [-Warray-bounds] 1697 | *pcc = disc_resp->disc.change_count; | ~~~~~~~~~~~~~~~^~~~~~~~~~~~~ This is due to the use of the struct smp_resp to aggregate all possible response types using a union but allocating a response buffer with a size exactly equal to the size of the response type needed. This leads to access to fields of struct smp_resp from an allocated memory area that is smaller than the size of struct smp_resp. Fix this by defining struct smp_disc_resp for sas discovery operations. Since this structure and the generic struct smp_resp are identical for the little endian and big endian archs, move the definition of these structures at the end of include/scsi/sas.h to avoid repeating their definition. Link: https://lore.kernel.org/r/20220609022456.409087-2-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-10scsi: qla2xxx: Update version to 10.02.07.600-kNilesh Javali
Link: https://lore.kernel.org/r/20220608115849.16693-11-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-10scsi: qla2xxx: edif: Fix slow session teardownQuinn Tran
User experience slow recovery when target device went through a stop/start of the authentication application (app_stop/app_start). Between the period of app_stop and app_start on the target device, target device choose to send ELS Reject for any receive AUTH ELS command. At this time, authentication application does not do ELS reject if it encounters error. Therefore, AUTH ELS reject signify authentication application is not running. If driver passes up the AUTH ELS Reject to the authentication application, then it would result in authentication application retrying/resending the same AUTH ELS command again + delay. As a work around, driver should trigger a session tear down where it tells the local authentication application to also tear down. At the next relogin, both sides are then synchronized. Link: https://lore.kernel.org/r/20220608115849.16693-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-10scsi: qla2xxx: edif: Reduce N2N thrashing at app_start timeQuinn Tran
For N2N + remote WWPN is bigger than local adapter, remote adapter will login to local adapter while authentication application is not running. When authentication application starts, the current session in FW needs to to be invalidated. Make sure the old session is torn down before triggering a relogin. Link: https://lore.kernel.org/r/20220608115849.16693-9-njavali@marvell.com Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-10scsi: qla2xxx: edif: Fix no logout on delete for N2NQuinn Tran
The driver failed to send implicit logout on session delete. For edif, this failed to flush any lingering SA index in FW. Set a flag to turn on implicit logout early in the session recovery to make sure the logout will go out in case of error. Link: https://lore.kernel.org/r/20220608115849.16693-8-njavali@marvell.com Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-10scsi: qla2xxx: edif: Fix session thrashQuinn Tran
Current code prematurely sends out PRLI before authentication application has given the OK to do so. This causes PRLI failure and session teardown. Prevents PRLI from going out before authentication app gives the OK. Link: https://lore.kernel.org/r/20220608115849.16693-7-njavali@marvell.com Fixes: 91f6f5fbe87b ("scsi: qla2xxx: edif: Reduce connection thrash") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 10:21:09 +0000