summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-08-13mac80211: remove always true conditionDan Carpenter
The outside if statement checks that IEEE80211_TX_INTFL_MLME_CONN_TX is set so this condition is always true. Checking twice upsets the static checkers. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-13mac80211: remove ieee80211_aes_cmac_calculate_k1_k2()Johannes Berg
The iwlwifi driver was the only driver that used this, but as it turns out it never needed it, so we can remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-13iwlwifi: mvm: don't set K1/K2 for AES-CMACJohannes Berg
According to firmware engineers, the firmware has never required these fields and the values have always been calculated, they were just leftovers from a previous implementation. Therefore remove the unnecessary calculation. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-13rfkill: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-13EDAC, ppc4xx: Access mci->csrows array elements properlyMichael Walle
The commit de3910eb79ac ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") changed the memory allocation for the csrows member. But ppc4xx_edac was forgotten in the patch. Fix it. Signed-off-by: Michael Walle <michael@walle.cc> Cc: <stable@vger.kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Link: http://lkml.kernel.org/r/1437469253-8611-1-git-send-email-michael@walle.cc Signed-off-by: Borislav Petkov <bp@suse.de>
2015-08-12cosa: missing error code on failure in probe()Dan Carpenter
If register_hdlc_device() fails, the current code returns 0 but we should return an error code instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12documentation: bring vxlan documentation more up-to-dateRick Jones
A few things have changed since the previous version of the vxlan documentation was written, so update it and correct some grammar and such while we are at it. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12net: fec: Remove unneeded use of IS_ERR_VALUE() macroFabio Estevam
There is no need to use the IS_ERR_VALUE() macro for checking the return value from pm_runtime_* functions. Just do a simple negative test instead. The semantic patch that makes this change is available in scripts/coccinelle/api/pm_runtime.cocci. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12bpf: fix bpf_perf_event_read() loop upper boundWei-Chun Chao
Verifier rejects programs incorrectly. Fixes: 35578d798400 ("bpf: Implement function bpf_perf_event_read()") Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Wei-Chun Chao <weichunc@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12Merge branch 'cxgb4-more-debug-info'David S. Miller
Hariprasad Shenai says: ==================== Add some more debug info This patch series adds the following. Add more info for sge_qinfo dump Differentiate tid and stids between different regions, and add a debugfs entry to dump all the tid info This patch series has been created against net-next tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12cxgb4: Add debugfs support to dump tid infoHariprasad Shenai
Add debugfs support to dump tid info like stid, sftid, tids, atid and hwtids Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12cxgb4: Differentiate between stids between server and filter regionHariprasad Shenai
For T4 adapter, offloaded servers tid for IPv4 connections are allocated from filter region. So add a new field for server filter tid if server tid is allocated from filter region. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12cxgb4: Differentiates between TIDs being used in TCAM and HASHHariprasad Shenai
For the tid info, differentiate from which region the TID is allocated from. It can be from TCAM region or HASH region. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12cxgb4: Add some more details to sge qinfoHariprasad Shenai
Adding more details to sge qinfo for debugging purpose. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12net: ipv4: increase dhcp inter device timeoutMugunthan V N
When a system has multiple ethernet devices and during DHCP request (for using NFS), the system waits only for HZ/2 which is 500mS before switching to another interface for DHCP. There are some routers (Ex: Trendnet routers) which responds to DHCP request at about 560mS. When the system has only one ethernet interface there is no issue as the timeout is 2S and the dev xid doesn't changes and only retries. But when the system has multiple Ethernet like DRA74x with CPSW in dual EMAC mode, the DHCP response is dropped as the dev xid changes while shifting to the next device. So changing inter device timeout to HZ (which is 1S). Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12bpf: fix build warnings and add function read_trace_pipe()Kaixu Xia
There are two improvements in this patch: 1. Fix the build warnings; 2. Add function read_trace_pipe() to print the result on the screen; Before this patch, we can get the result through /sys/kernel/de bug/tracing/trace_pipe and get nothing on the screen. By applying this patch, the result can be printed on the screen. $ ./tracex6 ... tracex6-705 [003] d..1 131.428593: : CPU-3 19981414 sshd-683 [000] d..1 131.428727: : CPU-0 221682321 sshd-683 [000] d..1 131.428821: : CPU-0 221808766 sshd-683 [000] d..1 131.428950: : CPU-0 221982984 sshd-683 [000] d..1 131.429045: : CPU-0 222111851 tracex6-705 [003] d..1 131.429168: : CPU-3 20757551 sshd-683 [000] d..1 131.429170: : CPU-0 222281240 sshd-683 [000] d..1 131.429261: : CPU-0 222403340 sshd-683 [000] d..1 131.429378: : CPU-0 222561024 ... Signed-off-by: Kaixu Xia <xiakaixu@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12net: atl1c: add BQL supportRon Angeles
This BQL implementation is mostly derived from its related driver, alx. Tested on AR8131 (rev c0) [1969:1063]. Saturated a 100mbps link with 5 concurrent runs of netperf. Ping latency dropped from 14ms to 3ms. Signed-off-by: Ron Angeles <ronangeles@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12Merge branch 'gianfar-fixes'David S. Miller
Jakub Kicinski says: ==================== gianfar: filer changes respinning with examples as requested. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12gianfar: remove faulty filer optimizerJakub Kicinski
Current filer rule optimization is broken in several ways: (1) Can perform reads/writes beyond end of allocated tables. (gianfar_ethtool.c:1326). (2) It breaks badly for rules with more than 2 specifiers (e.g. matching ip, port, tos). Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 tos 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 tos 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 tos 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: TOS == 00000003 AND Q:00 ctrl:0000008a prop:00000003 05: DIA == 0a000003 AND Q:11 ctrl:0000448c prop:0a000003 06: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 07: TOS == 00000002 AND Q:00 ctrl:0000008a prop:00000002 08: DIA == 0a000002 AND Q:09 ctrl:0000248c prop:0a000002 09: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 0a: DPT == 00000001 AND Q:00 ctrl:0000008e prop:00000001 0b: TOS == 00000001 CLE Q:01 ctrl:0000060a prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 (Entire cluster gets AND-ed together). (3) We observed that the masking rules it generates do not play well with clustering on P2020. Only first rule of the cluster would ever fire. Given that optimizer relies heavily on masking this is very hard to fix. Example: # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.1 dst-port 1 action 1 Added rule with ID 254 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.2 dst-port 2 action 9 Added rule with ID 253 # ethtool -N eth2 flow-type udp4 dst-ip 10.0.0.3 dst-port 3 action 17 Added rule with ID 252 # ./filer_decode /sys/kernel/debug/gfar1/filer_raw 00: MASK == 00000210 AND Q:00 ctrl:00000080 prop:00000210 01: FPR == 00000210 AND CLE Q:00 ctrl:00000281 prop:00000210 02: MASK == ffffffff AND Q:00 ctrl:00000080 prop:ffffffff 03: DPT == 00000003 AND Q:00 ctrl:0000008e prop:00000003 04: DIA == 0a000003 Q:11 ctrl:0000440c prop:0a000003 05: DPT == 00000002 AND Q:00 ctrl:0000008e prop:00000002 06: DIA == 0a000002 Q:09 ctrl:0000240c prop:0a000002 07: DIA == 0a000001 AND Q:00 ctrl:0000008c prop:0a000001 08: DPT == 00000001 CLE Q:01 ctrl:0000060e prop:00000001 ff: MASK >= 00000000 Q:00 ctrl:00000020 prop:00000000 Which looks correct according to the spec but only the first (eth id 252)/last added rule for 10.0.0.3 will ever trigger. As if filer did not treat the AND CLE as cluster start but also kept AND-ing the rules. We found no errata covering this. The fact that nobody noticed (2) or (3) makes me think that this feature is not very widely used and we should just remove it. Reported-by: Aleksander Dutkowski <adutkowski@gmail.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12gianfar: correct list membership accountingJakub Kicinski
At a cost of one line let's make sure .count is correct when calling gfar_process_filer_changes(). Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12gianfar: correct filer table writingJakub Kicinski
MAX_FILER_IDX is the last usable index. Using less-than will already guarantee that one entry for catch-all rule will be left, no need to subtract 1 here. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12hv_netvsc: Implement set_channels ethtool opAndrew Schwartzmeyer
This enables the use of ethtool --set-channels devname combined N to change the number of vRSS queues. Separate rx, tx, and other parameters are not supported. The maximum is rsscap.num_recv_que. It passes the given value to rndis_filter_device_add through the device_info->num_chn field. If the procedure fails, it attempts to recover to the prior state. If the recovery fails, it logs an error and aborts. Current num_chn is saved and restored when changing the MTU. Signed-off-by: Andrew Schwartzmeyer <andschwa@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12hv_netvsc: Set vRSS with num_chn in RNDIS filterAndrew Schwartzmeyer
Uses device_info->num_chn to pass user provided number of vRSS queues (from ethtool --set-channels) to rndis_filter_device_add. If nonzero and less than the maximum, set net_device->num_chn to the given value; else default to prior algorithm. Always initialize struct device_info to 0, otherwise not all its fields are guaranteed to be 0, which is necessary when checking if num_chn has been purposefully set. Signed-off-by: Andrew Schwartzmeyer <andschwa@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12lan78xx: Remove BUG_ON()Woojung.Huh@microchip.com
Removing BUG_ON() Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12lan78xx: Fix Smatch WarningsWoojung.Huh@microchip.com
lan78xx.c:2282 tx_complete() warn: variable dereferenced before check 'skb' (see line 2249) lan78xx.c:2885 lan78xx_bh() info: ignoring unreachable code. lan78xx.c:3159 lan78xx_probe() info: ignoring unreachable code. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12bonding: Gratuitous ARP gets dropped when first slave addedVenkat Venkatsubra
When the first slave is added (such as during bootup) the first gratuitous ARP gets dropped. We don't see this drop during a failover. The packet gets dropped in qdisc (noop_enqueue). The fix is to delay the sending of gratuitous ARPs till the bond dev's carrier is present. It can also be worked around by setting num_grat_arp to more than 1. Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12net: eth: altera: Remove sgdmadesclen member from altera_tse_privateTobias Klauser
altera_tse_private->sgdmadesclen is always assigned assigned the same value and never changes during runtime. Remove the struct member and use a new define for sizeof(struct sgdma_descrip) instead. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12net: dsa: Do not override PHY interface if already configuredFlorian Fainelli
In case we need to divert reads/writes using the slave MII bus, we may have already fetched a valid PHY interface property from Device Tree, and that mode is used by the PHY driver to make configuration decisions. If we could not fetch the "phy-mode" property, we will assign p->phy_interface to PHY_INTERFACE_MODE_NA, such that we can actually check for that condition as to whether or not we should override the interface value. Fixes: 19334920eaf7 ("net: dsa: Set valid phy interface type") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-12Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix coarse clock monotonicity (VDSO timestamp off by one jiffy compared to the syscall one)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: VDSO: fix coarse clock monotonicity regression
2015-08-12Merge branch 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linuxLinus Torvalds
Pull amd drm fixes from Alex Deucher: "Dave is on vacation at the moment, so please pull these radeon and amdgpu fixes directly. Just a few minor things for 4.2: - add a new radeon pci id - fix a power management regression in amdgpu - fix HEVC command buffer validation in amdgpu" * 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add new OLAND pci id Revert "drm/amdgpu: Configure doorbell to maximum slots" drm/amdgpu: add context buffer size check for HEVC
2015-08-12drm/radeon: add new OLAND pci idAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2015-08-12Revert "drm/amdgpu: Configure doorbell to maximum slots"Alex Deucher
This reverts commit 78ad5cdd21f0d614983fc397338944e797ec70b9. This commit breaks dpm and suspend/resume on CZ.
2015-08-12drm/amdgpu: add context buffer size check for HEVCBoyuan Zhang
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-08-12Merge tag 'regmap-fix-v4.2-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "regmap: Fix handling of present bits on rbtree cache block resize When expanding a cache block we use krealloc() to resize the register present bitmap without initialising the newly allocated data (the original code was written for kzalloc()). Add an appropraite memset() to fix that" * tag 'regmap-fix-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: regcache-rbtree: Clean new present bits on present bitmap resize
2015-08-12dm cache policy smq: move 'dm-cache-default' module alias to SMQYi Zhang
When creating dm-cache with the default policy, it will call request_module("dm-cache-default") to register the default policy. But the "dm-cache-default" alias was left referring to the MQ policy. Fix this by moving the module alias to SMQ. Fixes: bccab6a0 (dm cache: switch the "default" cache replacement policy from mq to smq) Signed-off-by: Yi Zhang <yizhan@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-12dm btree: add ref counting ops for the leaves of top level btreesJoe Thornber
When using nested btrees, the top leaves of the top levels contain block addresses for the root of the next tree down. If we shadow a shared leaf node the leaf values (sub tree roots) should be incremented accordingly. This is only an issue if there is metadata sharing in the top levels. Which only occurs if metadata snapshots are being used (as is possible with dm-thinp). And could result in a block from the thinp metadata snap being reused early, thus corrupting the thinp metadata snap. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-08-12dm thin metadata: delete btrees when releasing metadata snapshotJoe Thornber
The device details and mapping trees were just being decremented before. Now btree_del() is called to do a deep delete. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-08-12Bluetooth: hci_bcm: Fix "implicit declaration"Frederic Danis
The kbuild test robot reported implicit declaration of function 'acpi_dev_get_resources'. Surround ACPI function by CONFIG_ACPI test. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-12Bluetooth: hci_bcm: improve use of gpios APIUwe Kleine-König
devm_gpiod_get currently has an optional parameter to set initial direction and value for the requested gpio. Make use of this to simplify the driver and make it not fail to build when this parameter is made mandatory (which is scheduled for 4.3-rc1). Moreover use the _optional variant of devm_gpiod_get to simplify error handling (which also gets more strict for free). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-12net: Document xfrm4_gc_thresh and xfrm6_gc_threshAlexander Duyck
This change adds documentation for xfrm4_gc_thresh and xfrm6_gc_thresh based on the comments in commit eeb1b73378b56 ("xfrm: Increase the garbage collector threshold"). Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-08-11Merge tag 'localmodconfig-v4.2-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig Pull localmodconfig fix from Steven Rostedt: "Leonidas Spyropoulos found that modules like nouveau were being unselected by make localmodconfig even though their configs were set and the module was loaded and visible by lsmod. The reason for this was because streamline-config.pl only looks at Makefiles, and not Kbuild files. As these modules use Kbuild for their names, they too need to be checked by localmodconfig. This was fixed by Richard Weinberger" * tag 'localmodconfig-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-kconfig: localmodconfig: Use Kbuild files too
2015-08-11localmodconfig: Use Kbuild files tooRichard Weinberger
In kbuild it is allowed to define objects in files named "Makefile" and "Kbuild". Currently localmodconfig reads objects only from "Makefile"s and misses modules like nouveau. Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at Cc: stable@vger.kernel.org Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-08-11Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2015-08-11 Here's an important regression fix for the 4.2-rc series that ensures user space isn't given invalid LTK values. The bug essentially prevents the encryption of subsequent LE connections, i.e. makes it impossible to pair devices over LE. Let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-11documentation: networking: add 6lowpan documentationAlexander Aring
This patch adds a 6lowpan.txt into the networking documentation directory. Currently this documentation describes how the lowpan private data of net devices will be handled. Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Suggested-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-116lowpan: move module_init into core functionalityAlexander Aring
This patch moves module_init of 6lowpan module into core functionality of 6lowpan module. To load the ipv6 module at probing of the 6lowpan module should be core functionality. Loading next header compression modules is iphc specific. Nevertheless we only support IPHC for the generic 6LoWPAN branch right now so we can put it into the core functionality. If possible new compression formats are introduced nhc should load only when iphc is build. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-116lowpan: add generic 6lowpan netdev private dataAlexander Aring
This patch introduced the 6lowpan netdev private data struct. We name it lowpan_priv and it's placed at the beginning of netdev private data. All lowpan interfaces should allocate this room at first of netdev private data. 6LoWPAN LL private data can be allocate by additional netdev private data, e.g. dev->priv_size should be "sizeof(struct lowpan_priv) + sizeof(LL_LOWPAN_PRIVATE_DATA)". Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-11Bluetooth: 6lowpan: change netdev_priv to lowpan_devAlexander Aring
The usually way to get the btle lowpan private data is to use the introduced lowpan_dev inline function. This patch will cleanup by using lowpan_dev consequently. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-11Bluetooth: hci_bcm: Add suspend/resume PM functionsFrederic Danis
Add reference to hci_uart structure to bcm_device. This allows suspend/resume callbacks to manage UART flow control. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-11Bluetooth: hci_bcm: Retrieve UART speed from ACPIFrederic Danis
Parse platform_device's ACPI to retrieve UART init speed. When BCM device is open, check if its TTY has same parent as one of the platform devices saved. If yes, use platform_device's init speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-11net: rfkill: gpio: Remove BCM2E39 supportFrederic Danis
Power management support for BCM2E39 is now performed in Bluetooth BCM UART driver. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 02:09:35 +0000