| Age | Commit message (Collapse) | Author |
|---|
|
Maintenance of the ravb driver will be handled by Niklas for now. I
still intend to review patches, and will be using my own email address
going forward.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20250519133354.6564-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Zak Kemble says:
====================
net: bcmgenet: 64bit stats and expose more stats in ethtool
Hi, this patchset updates the bcmgenet driver with new 64bit statistics via
ndo_get_stats64 and rtnl_link_stats64, now reports hardware discarded
packets in the rx_missed_errors stat and exposes more stats in ethtool.
v1: https://lore.kernel.org/20250513144107.1989-1-zakkemble@gmail.com
v2: https://lore.kernel.org/20250515145142.1415-1-zakkemble@gmail.com
====================
Link: https://patch.msgid.link/20250519113257.1031-1-zakkemble@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expose more per-queue and overall stats in ethtool
Signed-off-by: Zak Kemble <zakkemble@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250519113257.1031-4-zakkemble@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hardware discarded packets are now counted in their own missed stat
instead of being lumped in with general errors.
Signed-off-by: Zak Kemble <zakkemble@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250519113257.1031-3-zakkemble@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the driver to use ndo_get_stats64, rtnl_link_stats64 and
u64_stats_t counters for statistics.
Signed-off-by: Zak Kemble <zakkemble@gmail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250519113257.1031-2-zakkemble@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While the MDIO address of the internal PHY on Allwinner sun8i chips is
generally 1, of_mdio_parse_addr is used to cleanly parse the address
from the device-tree instead of hardcoding it.
A commit reworking the code ditched the parsed value and hardcoded the
value 1 instead, which didn't really break anything but is more fragile
and not future-proof.
Restore the initial behavior using the parsed address returned from the
helper.
Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Link: https://patch.msgid.link/20250519164936.4172658-1-paulk@sys-base.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-05-19 (ice, idpf)
For ice:
Jake removes incorrect incrementing of MAC filter count.
Dave adds check for, prerequisite, switchdev mode before setting up LAG.
For idpf:
Pavan stores max_tx_hdr_size to prevent NULL pointer dereference during
reset.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: fix null-ptr-deref in idpf_features_check
ice: Fix LACP bonds without SRIOV environment
ice: fix vf->num_mac count with port representors
====================
Link: https://patch.msgid.link/20250519210523.1866503-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Heiner Kallweit says:
====================
net: phy: fixed_phy: simplifications and improvements
This series includes two types of changes:
- All callers pass PHY_POLL, therefore remove irq argument
- constify the passed struct fixed_phy_status *status
====================
Link: https://patch.msgid.link/4d4c468e-300d-42c7-92a1-eabbdb6be748@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Constify the passed struct fixed_phy_status *status where possible.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/d1764b62-8538-408b-a4e3-b63715481a38@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers pass PHY_POLL, therefore remove irq argument from
fixed_phy_register().
Note: I keep the irq argument in fixed_phy_add_gpiod() for now,
for the case that somebody may want to use a GPIO interrupt in
the future, by e.g. adding a call to fwnode_irq_get() to
fixed_phy_get_gpiod().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/31cdb232-a5e9-4997-a285-cb9a7d208124@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All callers pass PHY_POLL, therefore remove irq argument from
fixed_phy_add().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://patch.msgid.link/b3b9b3bc-c310-4a54-b376-c909c83575de@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
AFAIU always returning -1 from lockdep's compare function
basically disables checking of dependencies between given
locks. Try to be a little more precise about what guarantees
that instance locks won't deadlock.
Right now we only nest them under protection of rtnl_lock.
Mostly in unregister_netdevice_many() and dev_close_many().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250517200810.466531-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix "withouth" to "without"
Fix "instaces" to "instances"
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250517032535.1176351-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517020003.1159640-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cover three recent cases:
1. missing ops locking for the lowers during netdev_sync_lower_features
2. missing locking for dev_set_promiscuity (plus netdev_ops_assert_locked
with a comment on why/when it's needed)
3. rcu lock during team_change_rx_flags
Verified that each one triggers when the respective fix is reverted.
Not sure about the placement, but since it all relies on teaming,
added to the teaming directory.
One ugly bit is that I add NETIF_F_LRO to netdevsim; there is no way
to trigger netdev_sync_lower_features without it.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250516232205.539266-1-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the pattern of calling and validating kzalloc then
fbnic_fw_init_cmpl with a single function, fbnic_fw_alloc_cmpl.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250516164804.741348-1-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using random mac address is not an error since the driver continues to
function, it should be informative that the system has not assigned
a MAC address. This is inline with other drivers such as ax88796c,
dm9051 etc. Drop the error level to info level.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250516122655.442808-1-nm@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sky Huang says:
====================
Add built-in 2.5G ethernet phy support on MT7988
From: Sky Huang <skylake.huang@mediatek.com>
This patchset adds support for built-in 2.5Gphy on MT7988, sort file
and config sequence in related Kconfig and Makefile.
====================
Link: https://patch.msgid.link/20250516102327.2014531-1-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for internal 2.5Gphy on MT7988. This driver will load
necessary firmware and add appropriate time delay to make sure
that firmware works stably. The firmware loading procedure takes
about 11ms in this driver.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250516102327.2014531-3-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sort config and file names in Kconfig and Makefile in
drivers/net/phy/mediatek/ in alphabetical order.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250516102327.2014531-2-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Function __sctp_write_space() doesn't set poll key, which leads to
ep_poll_callback() waking up all waiters, not only these waiting
for the socket being writable. Set the key properly using
wake_up_interruptible_poll(), which is preferred over the sync
variant, as writers are not woken up before at least half of the
queue is available. Also, TCP does the same.
Signed-off-by: Petr Malat <oss@malat.biz>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250516081727.1361451-1-oss@malat.biz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RTL8127-internal PHY is RTL8261C which is a integrated 10Gbps PHY with ID
0x001cc890. It follows the code path of RTL8125/RTL8126 internal NBase-T
PHY.
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250516055622.3772-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current implementation of per-pdev frequency range updates assumes that
each pdev supports only a single band. As a result in ath12k_regd_update(),
bands are handled using an if-else structure, which limits updates to only
one of the band per pdev. This assumption does not hold for all chipsets.
For example, the WCN7850 supports multiple bands within a single pdev.
Hence to accommodate such cases, update the logic to account for all band
cases by handling each band in a separate if conditions instead of the
previous if-else structure.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: 13324cecbb2c ("wifi: ath12k: Update frequency range if reg rules changes")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250520-fix_freq_range_update-v1-1-e061fd147b87@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
The function calls bitmap_empty() just before find_first_bit(). Both
functions are O(N). Because find_first_bit() returns >= nbits in case of
empty bitmap, the bitmap_empty() test may be avoided.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20250326155200.39895-1-yury.norov@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Fix the handling of err_wq_init and err_reg_netdev paths in
enetc4_pf_netdev_create() function.
Fixes: 6c5bafba347b ("net: enetc: add MAC filtering for i.MX95 ENETC PF")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516052734.3624191-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Error-handling paths in msm_pinctrl_probe() don't call
a function required to unroll restart handler registration,
unregister_restart_handler(). Instead of adding calls to this function,
switch the msm pinctrl code into using devm_register_sys_off_handler().
Fixes: cf1fc1876289 ("pinctrl: qcom: use restart_notifier mechanism for ps_hold")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-2-249999af0fc1@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
On Qualcomm platforms if the board uses GPIO hogs msm_pinmux_request()
calls gpiochip_line_is_valid(). After commit 8015443e24e7 ("gpio: Hide
valid_mask from direct assignments") gpiochip_line_is_valid() uses
gc->gpiodev, which is NULL when GPIO hog pins are being processed.
Thus after this commit using GPIO hogs causes the following crash. In
order to fix this, verify that gc->gpiodev is not NULL.
Note: it is not possible to reorder calls (e.g. by calling
msm_gpio_init() before pinctrl registration or by splitting
pinctrl_register() into _and_init() and pinctrl_enable() and calling the
latter function after msm_gpio_init()) because GPIO chip registration
would fail with EPROBE_DEFER if pinctrl is not enabled at the time of
registration.
pc : gpiochip_line_is_valid+0x4/0x28
lr : msm_pinmux_request+0x24/0x40
sp : ffff8000808eb870
x29: ffff8000808eb870 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff726240f9d040 x24: 0000000000000000
x23: ffff7262438c0510 x22: 0000000000000080 x21: ffff726243ea7000
x20: ffffab13f2c4e698 x19: 0000000000000080 x18: 00000000ffffffff
x17: ffff726242ba6000 x16: 0000000000000100 x15: 0000000000000028
x14: 0000000000000000 x13: 0000000000002948 x12: 0000000000000003
x11: 0000000000000078 x10: 0000000000002948 x9 : ffffab13f50eb5e8
x8 : 0000000003ecb21b x7 : 000000000000002d x6 : 0000000000000b68
x5 : 0000007fffffffff x4 : ffffab13f52f84a8 x3 : ffff8000808eb804
x2 : ffffab13f1de8190 x1 : 0000000000000080 x0 : 0000000000000000
Call trace:
gpiochip_line_is_valid+0x4/0x28 (P)
pin_request+0x208/0x2c0
pinmux_enable_setting+0xa0/0x2e0
pinctrl_commit_state+0x150/0x26c
pinctrl_enable+0x6c/0x2a4
pinctrl_register+0x3c/0xb0
devm_pinctrl_register+0x58/0xa0
msm_pinctrl_probe+0x2a8/0x584
sdm845_pinctrl_probe+0x20/0x88
platform_probe+0x68/0xc0
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x208/0x5e8
worker_thread+0x1b4/0x35c
kthread+0x144/0x220
ret_from_fork+0x10/0x20
Code: b5fffba0 17fffff2 9432ec27 f9400400 (f9428800)
Fixes: 8015443e24e7 ("gpio: Hide valid_mask from direct assignments")
Reported-by: Doug Anderson <dianders@chromium.org>
Closes: https://lore.kernel.org/r/CAD=FV=Vg8_ZOLgLoC4WhFPzhVsxXFC19NrF38W6cW_W_3nFjbw@mail.gmail.com
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-1-249999af0fc1@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Axel Forsman <axfo@kvaser.com> says:
This patch series fixes a couple of race conditions in the
kvaser_pciefd driver surfaced by enabling MSI interrupts and the new
Kvaser PCIe 8xCAN.
Changes since version 2:
* Rebase onto linux-can/main to resolve del_timer()/timer_delete()
merge conflict.
* Reword 2nd commit message slightly.
Changes since version 1:
* Change type of srb_cmd_reg from "__le32 __iomem *" to
"void __iomem *".
* Maintain TX FIFO count in driver instead of querying HW.
* Stop queue at end of .start_xmit() if full.
Link: https://patch.msgid.link/20250520114332.8961-1-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Going bus-off on a channel doing RX could result in dropped packets.
As netif_running() gets cleared before the channel abort procedure,
the handling of any last RDATA packets would see netif_rx() return
non-zero to signal a dropped packet. kvaser_pciefd_read_buffer() dealt
with this "error" by breaking out of processing the remaining DMA RX
buffer.
Only return an error from kvaser_pciefd_read_buffer() due to packet
corruption, otherwise handle it internally.
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-4-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The functions kvaser_pciefd_start_xmit() and
kvaser_pciefd_handle_ack_packet() raced to stop/wake TX queues and
get/put echo skbs, as kvaser_pciefd_can->echo_lock was only ever taken
when transmitting and KCAN_TX_NR_PACKETS_CURRENT gets decremented
prior to handling of ACKs. E.g., this caused the following error:
can_put_echo_skb: BUG! echo_skb 5 is occupied!
Instead, use the synchronization helpers in netdev_queues.h. As those
piggyback on BQL barriers, start updating in-flight packets and bytes
counts as well.
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-3-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Avoid the driver missing IRQs by temporarily masking IRQs in the ISR
to enforce an edge even if a different IRQ is signalled before handled
IRQs are cleared.
Fixes: 48f827d4f48f ("can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR")
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-2-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs fix from Mike Marshall:
"Fix for orangefs page writeout counting"
* tag 'for-linus-6.15-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: adjust counting code to recover from 665575cf
|
|
A malicious USB device can send a WMI_SWBA_EVENTID event from an
ath9k_htc-managed device before beaconing has been enabled. This causes
a device-by-zero error in the driver, leading to either a crash or an
out of bounds read.
Prevent this by aborting the handling in ath9k_htc_swba() if beacons are
not enabled.
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/r/88967.1743099372@localhost
Fixes: 832f6a18fc2a ("ath9k_htc: Add beacon slots")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250402112217.58533-1-toke@toke.dk
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
A late commit to 6.14-rc7! broke orangefs. 665575cf seems like a
good change, but maybe should have been introduced during the merge
window. This patch adjusts the counting code associated with
writing out pages so that orangefs works in a 665575cf world.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
|
|
Whenever there is a change in the country code settings from the
user, driver does an intersection of the regulatory rules for this
new country with the original regulatory rules which were reported
during initialization time.
There is also similar logic running in firmware with a difference
that the intersection in firmware is only done when the country code
is configuration during boot up time (BDF/OTP). Firmware logic does
not kick in when no country code is configured during device bring
up time as the device is always expected to have the country code
configured properly in the deployment.
There is a debug/test use case that requires absolute regulatory
rules to be used for a user configured country code when the device
is not configured with a particular country code during boot up time.
To support the above test use case, remove the redundant regulatory
rules intersection logic in the host driver. Depend on the
intersection logic in firmware when the device comes up with
pre-configured country code.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00209-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Aishwarya R <quic_aisr@quicinc.com>
Signed-off-by: Rajat Soni <quic_rajson@quicinc.com>
Link: https://patch.msgid.link/20250505034351.1365914-1-quic_rajson@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element
contains MCS15 Disable subfield as the sixth bit, which is set when
MCS15 support is not enabled.
During association, firmware will use this MCS15 flag to enable or
disable the reception of PPDU with EHT-MCS15 capability.
Send MCS15 support to firmware through WMI command during peer assoc.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com>
Link: https://patch.msgid.link/20250505153536.3275145-1-quic_mkumarg@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
New HP ZBook with Realtek HDA codec ALC3247 needs the quirk
ALC236_FIXUP_HP_GPIO_LED to fix the micmute LED.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250520132101.120685-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add support for HP Agusta.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250520124757.12597-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-05-20
this is a pull request of 3 patches for net/main.
The 1st patch is by Rob Herring, and fixes the $id path in the
microchip,mcp2510.yaml device tree bindinds documentation.
The last 2 patches are from Oliver Hartkopp and fix a use-after-free
read and an out-of-bounds read in the CAN Broadcast Manager (BCM)
protocol.
linux-can-fixes-for-6.15-20250520
* tag 'linux-can-fixes-for-6.15-20250520' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: bcm: add missing rcu read protection for procfs content
can: bcm: add locking for bcm_op runtime updates
dt-bindings: can: microchip,mcp2510: Fix $id path
====================
Link: https://patch.msgid.link/20250520091424.142121-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The NIX_PARSE_S structure populated by hardware in the
NIX RX CQE has parsing information for the received packet.
A tracepoint to dump the all words of NIX_PARSE_S
is helpful in debugging packet parser.
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/1747331048-15347-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After having factored out the provider part from mdio_bus.c, we can
make the mdio consumer / device layer a separate module. This also
allows to remove Kconfig symbol MDIO_DEVICE.
The module init / exit functions from mdio_bus.c no longer have to be
called from phy_device.c. The link order defined in
drivers/net/phy/Makefile ensures that init / exit functions are called
in the right order.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/dba6b156-5748-44ce-b5e2-e8dc2fcee5a7@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Lenovo Yoga Pro 7 (gen 10) with Realtek ALC3306 and combined CS35L56
amplifiers need quirk ALC287_FIXUP_YOGA9_14IAP7_BASS_SPK_PIN to
enable bass
Signed-off-by: Ed Burcher <git@edburcher.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250519224907.31265-2-git@edburcher.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Gur Stavi says:
====================
queue_api: reduce risk of name collision over txq
Rename local variable in macros from txq to _txq.
When macro parameter get_desc is expended it is likely to have a txq
token that refers to a different txq variable at the caller's site.
====================
Link: https://patch.msgid.link/cover.1747559621.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename local variable in macros from txq to _txq.
When macro parameter get_desc is expended it is likely to have a txq
token that refers to a different txq variable at the caller's site.
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/95b60d218f004308486d92ed17c8cc6f28bac09d.1747559621.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
idpf: add initial PTP support
Milena Olech says:
This patch series introduces support for Precision Time Protocol (PTP) to
Intel(R) Infrastructure Data Path Function (IDPF) driver. PTP feature is
supported when the PTP capability is negotiated with the Control
Plane (CP). IDPF creates a PTP clock and sets a set of supported
functions.
During the PTP initialization, IDPF requests a set of PTP capabilities
and receives a writeback from the CP with the set of supported options.
These options are:
- get time of the PTP clock
- set the time of the PTP clock
- adjust the PTP clock
- Tx timestamping
Each feature is considered to have direct access, where the operations
on PCIe BAR registers are allowed, or the mailbox access, where the
virtchnl messages are used to perform any PTP action. Mailbox access
means that PTP requests are sent to the CP through dedicated secondary
mailbox and the CP reads/writes/modifies desired resource - PTP Clock
or Tx timestamp registers.
Tx timestamp capabilities are negotiated only for vports that have
UPLINK_VPORT flag set by the CP. Capabilities provide information about
the number of available Tx timestamp latches, their indexes and size of
the Tx timestamp value. IDPF requests Tx timestamp by setting the
TSYN bit and the requested timestamp index in the context descriptor for
the PTP packets. When the completion tag for that packet is received,
IDPF schedules a worker to read the Tx timestamp value.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: add support for Rx timestamping
idpf: add Tx timestamp flows
idpf: add Tx timestamp capabilities negotiation
idpf: add PTP clock configuration
idpf: add mailbox access to read PTP clock time
idpf: negotiate PTP capabilities and get PTP clock
idpf: move virtchnl structures to the header file
virtchnl: add PTP virtchnl definitions
idpf: add initial PTP support
idpf: change the method for mailbox workqueue allocation
====================
Link: https://patch.msgid.link/20250516170645.1172700-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix misspelling reported by codespell
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516225156.1122058-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Seems like the extack cookie hasn't found any users outside
of wireless, which always uses nl_set_extack_cookie_u64().
Thus, allocating 20 bytes for it is pointless, reduce that
to 8 bytes, and add a BUILD_BUG_ON() to ensure it's enough
(obviously it is, for a u64, but in case it changes again.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250516115927.38209-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During a code review, it is observed that in the scenario
where scan initiation fails, the current code schedules the
ar->scan.timeout workqueue which is not necessary.
In the scan initiation failure scenario, exit the code instead
of scheduling the ar->scan.timeout workqueue.
Compile tested only.
Signed-off-by: Vignesh C <quic_vignc@quicinc.com>
Link: https://patch.msgid.link/20250512065849.2833232-1-quic_vignc@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Memory allocated for firmware pdev, vdev and beacon statistics
are not released during rmmod. Below kmemleak trace is seen for this
memory leak:
unreferenced object 0xffff8e76aebdfa00 (size 256):
comm "softirq", pid 0, jiffies 4299272453
hex dump (first 32 bytes):
28 19 71 c3 76 8e ff ff 28 19 71 c3 76 8e ff ff (.q.v...(.q.v...
9f ff ff ff f4 d4 03 00 aa 88 09 00 bd 40 23 00 .............@#.
backtrace (crc dfe1b440):
__kmalloc_cache_noprof+0x2b0/0x370
ath12k_wmi_tlv_fw_stats_data_parse.isra.0+0x44e/0x730 [ath12k]
ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k]
ath12k_update_stats_event+0x85/0x300 [ath12k]
ath12k_wmi_op_rx+0x624/0xd70 [ath12k]
ath12k_htc_rx_completion_handler+0x1f4/0x330 [ath12k]
ath12k_ce_recv_process_cb+0x218/0x300 [ath12k]
ath12k_pci_ce_workqueue+0x1b/0x30 [ath12k]
process_one_work+0x219/0x680
bh_worker+0x198/0x1f0
tasklet_action+0x13/0x30
handle_softirqs+0xca/0x460
__irq_exit_rcu+0xbe/0x110
irq_exit_rcu+0x9/0x30
common_interrupt+0xa7/0xc0
asm_common_interrupt+0x26/0x40
Fix this by calling ath12k_fw_stats_reset() before hardware unregister.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Fixes: b8a0d83fe4c7 ("wifi: ath12k: move firmware stats out of debugfs")
Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250507-fw-stats-mem-leak-v1-1-8d4d1d8ec0e8@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Users of the Lenovo ThinkPad X13s have reported that Wi-Fi sometimes
breaks and the log fills up with errors like:
ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1484, expected 1492
ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1460, expected 1484
which based on a quick look at the ath11k driver seemed to indicate some
kind of ring-buffer corruption.
Miaoqing Pan tracked it down to the host seeing the updated destination
ring head pointer before the updated descriptor, and the error handling
for that in turn leaves the ring buffer in an inconsistent state.
While this has not yet been observed with ath12k, the ring-buffer
implementation is very similar to the ath11k one and it suffers from the
same bugs.
Add the missing memory barrier to make sure that the descriptor is read
after the head pointer to address the root cause of the corruption while
fixing up the error handling in case there are ever any (ordering) bugs
on the device side.
Note that the READ_ONCE() are only needed to avoid compiler mischief in
case the ring-buffer helpers are ever inlined.
Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Cc: stable@vger.kernel.org # 6.3
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218623
Link: https://lore.kernel.org/20250310010217.3845141-3-quic_miaoqing@quicinc.com
Cc: Miaoqing Pan <quic_miaoqing@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Link: https://patch.msgid.link/20250321095219.19369-1-johan+linaro@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
