summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-11net: hns3: enlarge HCLGE_RESET_WAIT_CNTHuazhong Tan
When the load of firmware is high, its reset task may takes more time(which will be as long as 35 seconds). So this patch modifies HCLGE_RESET_WAIT_CNT to match the firmware's. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-11net: hns3: refactor the procedure of VF FLRHuazhong Tan
Currently, the actual work of VF FLR is handled in the reset task, which is asynchronous. So in some case, if the preparing and rebuilding are not done, then the VF FLR will trigger some problems, for example, makes hardware go into chaos. So this patch separates the process of VF FLR from reset task, and adds a semaphore to serialize this reset and others. When FLR's preparing fails, if there has other higher level reset pending or failing times less than the HCLGE_FLR_RETRY_CNT, this preparing should be retried, otherwise it will get into a wrong state. BTW, while the hardware reports misc interrupt during pcie_flr(), the driver can not receive this interrupt anymore, so disable it when hclgevf_flr_prepare() return, and re-enable it when enter hclgevf_flr_done(). Avoid declaring internal function hclgevf_enable_vector(), this patch also moves its definition forward, and removes unused enum hnae3_flr_state. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-11net: hns3: refactor the precedure of PF FLRHuazhong Tan
Currently, the actual work of PF FLR is handled in the reset task, which is asynchronous. So in some case, if the preparing and rebuilding are not done, then the PF FLR will trigger some problems, for example, makes hardware go into chaos. So this patch separates the process of PF FLR from reset task, and adds a semaphore to serialize this reset and others. When FLR's preparing fails, if there has other higher level reset pending or failing times less than the HCLGE_FLR_RETRY_CNT, this preparing should be retried, otherwise PF and its VF may get into wrong state. BTW, while the hardware reports misc interrupt during pcie_flr(), the driver can not receive this interrupt anymore, so disable it when hclge_flr_prepare() return, and re-enable it when enter hclge_flr_done(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-11net: hns3: split hclgevf_reset() into preparing and rebuilding partHuazhong Tan
hclgevf_reset() is a little bloated, and the process of VF FLR will be separated from the reset task later. So this patch splits hclgevf_reset() into hclgevf_reset_prepare() and hclge_reset_rebuild(), then FLR can also reuse these two functions. Also moves HNAE3_UP_CLIENT into hclgevf_reset_stack(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-11net: hns3: split hclge_reset() into preparing and rebuilding partHuazhong Tan
hclge_reset() is a little bloated, and the process of PF FLR will be separated from the reset task later. So this patch splits hclge_reset() into hclge_reset_prepare() and hclge_reset_rebuild(), then FLR can also reuse these two functions. BTW, since hclge_clear_reset_cause() and hclge_reset_prepare_up() will not affect the device, so in hclge_reset_rebuild(), these functions are called without rtnl_lock. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10sfc: remove set but not used variable 'nic_data'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/sfc/mcdi_functions.c: In function 'efx_mcdi_ev_init': drivers/net/ethernet/sfc/mcdi_functions.c:79:28: warning: variable 'nic_data' set but not used [-Wunused-but-set-variable] commit 4438b587fe4b ("sfc: move MCDI event queue management code") introduces this unused variable. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10sfc: remove duplicated include from ef10.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10bnxt: Detach page from page pool before sending up the stackJonathan Lemon
When running in XDP mode, pages come from the page pool, and should be freed back to the same pool or specifically detached. Currently, when the driver re-initializes, the page pool destruction is delayed forever since it thinks there are oustanding pages. Fixes: 322b87ca55f2 ("bnxt_en: add page_pool support") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10Merge branch 'devlink-documentation-refactor'David S. Miller
Jacob Keller says: ==================== devlink documentation refactor This series updates the devlink documentation, with a few primary goals * move all of the devlink documentation into a dedicated subfolder * convert that documentation to the reStructuredText format * merge driver-specific documentations into a single file per driver * add missing documentation, including per-driver and devlink generally For each driver, I took the time to review the code and add further documentation on the various features it currently supports. Additionally, I added new documentation files for some of the features such as devlink-dpipe, devlink-resource, and devlink-regions. Note for the region snapshot triggering, I kept that as a separate patch as that is based on work that has not yet been merged to net-next, and may change. I also improved the existing documentation for devlink-info and devlink-param by adding a bit more of an introduction when converting it to the rst format. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: document region snapshot triggering from userspaceJacob Keller
Now that devlink regions can be triggered via DEVLINK_CMD_REGION_TRIGGER, document this in the devlink-region.rst file. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: introduce devlink-dpipe.rst documentation fileJacob Keller
Primarily based on the DPIPE netdev conference paper, introduce a new file to document the dpipe interface. This likely needs further improvement, but is at least a good overall start. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: add a devlink-resource.rst documentation fileJacob Keller
Take the little bit of documentation for resources from various commit messages and combine it into a new devlink-resource.rst file. This could probably be expanded on even further by someone with more knowledge of how the devlink resources work. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: rename and expand devlink-trap-netdevsim.rstJacob Keller
Rename the trap-specific netdevimsim.rst file, and expand it to include documentation of all the devlink features currently implemented by the netdevsim driver code. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: add documentation for ionic device driverJacob Keller
The IONIC device driver allocates a devlink and reports versions. Add documentation for this driver. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Shannon Nelson <snelson@pensando.io> Acked-by: Shannon Nelson <snelson@pensandi.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: add a file documenting devlink regionsJacob Keller
Also document the regions created by the mlx4 driver. This is currently the only in-tree driver that creates devlink region snapshots. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: add a driver-specific file for the qed driverJacob Keller
The qed driver recently added devlink support with a single devlink parameter. Add a driver-specific file to document the devlink features that the qed driver supports. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Ariel Elior <aelior@marvell.com> Cc: GR-everest-linux-l2@marvell.com Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: add parameter documentation for the mlx4 driverJacob Keller
The mlx5 and mlxsw drivers have driver-specific documentation for the devlink features they support. No such file was added for mlx4. Add a file to document the mlx4 devlink support. Initially it contains only the devlink parameters. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: document info versions for each driverJacob Keller
Add the set of info versions reported by each device driver, including a description of what the version represents, and what modes (fixed, running, stored) it reports. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: convert driver-specific files to reStructuredTextJacob Keller
Several drivers document what parameters they support in a devlink-params-*.txt file. This file is supposed to contain both the list of generic parameters implemented by the driver, as well as a list of driver-specific parameters and their descriptions. It would also be good if the driver documentation included other driver-specific implementations, such as info versions, devlink regions, and so forth. Convert all of these documentation files to reStructuredText, and rename them to just the driver name. Future changes will include other driver-specific implementations. Each file will contain a table for the generic parameters implemented, as well as a separate table for the driver-specific parameters. Future sections such as for devlink info versions will be added to these files. This avoids creating additional devlink-<feature>-<driver> files for each devlink feature, reducing clutter in the documentation folder. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Ido Schimmel <idosch@mellanox.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: mention reloading in devlink-params.rstJacob Keller
Mention that drivers must support devlink-reload in order for driverinit parameters to function properly Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: add documentation for generic devlink parametersJacob Keller
A few generic devlink parameters have been added, but never documented. Fix that now. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: convert devlink-params.txt to reStructuredTextJacob Keller
Convert the generic parameters descriptions into the reStructuredText format. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: rename devlink-info-versions.rst and add a headerJacob Keller
Rename the devlink-info-versions.rst file to a plain devlink-info.rst file. Add additional paragraphs explaining what devlink-info is for, and the expectation that drivers use the generic names where plausible. Note that drivers which use non-standard info version names ought to document these in a driver-specific info-versions.rst file. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: convert devlink-health.txt to rst formatJacob Keller
Update the devlink-health documentation to use the newer ReStructuredText format. Note that it's unclear what OOB stood for, and it has been left as-is without a proper first-use expansion of the acronym. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: move devlink documentation to subfolderJacob Keller
Combine the documentation for devlink into a subfolder, and provide an index.rst file that can be used to generally describe devlink. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10devlink: add macro for "fw.psid"Jacob Keller
The "fw.psid" devlink info version is documented in devlink-info.rst, and used by one driver. However, there is no associated macro for this firmware version like there is for others. Add one now. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10Merge branch ↵David S. Miller
'r8169-factor-out-chip-specific-PHY-configuration-to-a-separate-source-file' Heiner Kallweit says: ==================== r8169: factor out chip-specific PHY configuration to a separate source file Basically every chip version needs its own PHY configuration. To improve maintainability of the driver move all these PHY configurations to a separate source file. To allow this we first have to change all PHY configurations to use phylib functions wherever possible. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: factor out PHY configuration to r8169_phy_config.cHeiner Kallweit
Move chip-specific PHY configurations to separate source file r8169_phy_config.c. This improves maintainability of the driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: add r8169.hHeiner Kallweit
In preparation of factoring out PHY configuration to a separate source file move commonly used definitions to new header file r8169.h. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: rename rtl_apply_firmwareHeiner Kallweit
Rename rtl_apply_firmware() to r8169_apply_firmware() before exporting it to avoid namespace clashes with other drivers for Realtek hardware. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: add phydev argument to rtl8168d_apply_firmware_condHeiner Kallweit
Pass the phy_device as parameter to rtl8168d_apply_firmware_cond(), this avoids having to access rtl8169_private internals. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: use phy_read/write instead of rtl_readphy/writephyHeiner Kallweit
Replace rtl_writephy and rtl_readphy with the respective phylib functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: replace rtl_w0w1_phyHeiner Kallweit
Replace rtl_w0w1_phy with phylib functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: replace rtl_patchphyHeiner Kallweit
Replace rtl_patchphy with phylib functions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: move disabling MAC EEE for RTL8402/RTL8106eHeiner Kallweit
Move configuring EEE on MAC side out of the PHY configuration. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: move setting ERI register 0x1d0 for RTL8106Heiner Kallweit
Writing this ERI register is a MAC setting, so move it to rtl_hw_start_8106(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: switch to phylib functions in rtl_writephy_batchHeiner Kallweit
Switch rtl_writephy_batch() to phylib functions, as a result we can avoid passing a rtl8169_private parameter. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: change argument type of RTL8168g-specific PHY config functionsHeiner Kallweit
These functions use only the phy_device member of rtl8169_private, so we can pass the phy_device as parameter directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: change argument type of EEE PHY functionsHeiner Kallweit
These functions use only the phy_device member of rtl8169_private, so we can pass the phy_device as parameter directly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: move RTL8169scd Gigabyte PHY quirkHeiner Kallweit
In preparation of factoring out rtl8169scd_hw_phy_config() move this quirk to rtl8169_init_phy(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: remove not needed debug print in rtl8169_init_phyHeiner Kallweit
Remove a useless debug statement. This also allows to remove the net_device parameter from rtl8169_init_phy(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10r8169: prepare for exporting rtl_hw_phy_configHeiner Kallweit
In preperation of factoring out the PHY configuration to a separate source file this patch: - avoids accessing rtl8169_private internals by passing the phy_device and mac_version as separate parameters - renames rtl_hw_phy_config to r8169_hw_phy_config to avoid namespace clashes with other drivers for Realtek hardware Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10Merge branch 'stmmac-Frame-Preemption-fixes'David S. Miller
Jose Abreu says: ==================== net: stmmac: Frame Preemption fixes Two single fixes for the -next tree for recently introduced Frame Preemption feature. 1) and 2) fixes the disabling of Frame Preemption that was not being correctly handled because of a missing return. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: stmmac: gmac5+: Fix missing returnJose Abreu
If FPE is supposed to be disabled we need to return after disabling it. Fixes: 7c7282746883 ("net: stmmac: gmac5+: Add support for Frame Preemption") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10net: stmmac: xgmac: Fix missing returnJose Abreu
If FPE is supposed to be disabled we need to return after disabling it. Fixes: f0e56c8d8f7d ("net: stmmac: xgmac3+: Add support for Frame Preemption") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10Merge branch 'sfc-even-more-code-refactoring'David S. Miller
Alex Maftei says: ==================== sfc: even more code refactoring Splitting even more of the driver code into different files, which will later be used in another driver for a new product. This is a continuation to my previous patch series, and the one before it. There will be a stand-alone patch as well after this - after which the refactoring will be concluded, for now. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10sfc: move RPS codeAlex Maftei (amaftei)
Includes a couple of filtering functions and also renames a constant. Style fixes included. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10sfc: move yet more functionsAlex Maftei (amaftei)
Functions are not related. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10sfc: move RSS codeAlex Maftei (amaftei)
Style fixes included. Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-10sfc: move a couple more functionsAlex Maftei (amaftei)
Signed-off-by: Alexandru-Mihai Maftei <amaftei@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 08:51:12 +0000