Age | Commit message (Collapse) | Author |
|
The saved_cmdlines is used to map pids to the task name, such that the
output of the tracing does not just show pids, but also gives a human
readable name for the task.
If the name is not mapped, the output looks like this:
<...>-1316 [005] ...2 132.044039: ...
Instead of this:
gnome-shell-1316 [005] ...2 132.044039: ...
The names are updated when tracing is running, but are skipped if tracing
is stopped. Unfortunately, this stops the recording of the names if the
top level tracer is stopped, and not if there's other tracers active.
The recording of a name only happens when a new event is written into a
ring buffer, so there is no need to test if tracing is on or not. If
tracing is off, then no event is written and no need to test if tracing is
off or not.
Remove the check, as it hides the names of tasks for events in the
instance buffers.
Cc: stable@vger.kernel.org
Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
One should only use st_shndx when >SHN_UNDEF and <SHN_LORESERVE. When
SHN_XINDEX, then use .symtab_shndx. Otherwise use 0.
This handles the case: st_shndx >= SHN_LORESERVE && st_shndx != SHN_XINDEX.
Link: https://lore.kernel.org/lkml/20210607023839.26387-1-mark-pk.tsai@mediatek.com/
Link: https://lkml.kernel.org/r/20210616154126.2794-1-mark-pk.tsai@mediatek.com
Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
[handle endianness of sym->st_shndx]
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Various elements are parsed with a requirement to have an
exact size, when really we should only check that they have
the minimum size that we need. Check only that and therefore
ignore any additional data that they might carry.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.cd101f8040a4.Iadf0e9b37b100c6c6e79c7b298cc657c2be9151a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Apparently we never clear these values, so they'll remain set
since the setting of them is conditional. Clear the values in
the relevant other cases.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.316e32d136a9.I2a12e51814258e1e1b526103894f4b9f19a91c8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If cfg80211_pmsr_process_abort() moves all the PMSR requests that
need to be freed into a local list before aborting and freeing them.
As a result, it is possible that cfg80211_pmsr_complete() will run in
parallel and free the same PMSR request.
Fix it by freeing the request in cfg80211_pmsr_complete() only if it
is still in the original pmsr list.
Cc: stable@vger.kernel.org
Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.1fbef57e269a.I00294bebdb0680b892f8d1d5c871fd9dbe785a5e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If all net/wireless/certs/*.hex files are deleted, the build
will hang at this point since the 'cat' command will have no
arguments. Do "echo | cat - ..." so that even if the "..."
part is empty, the whole thing won't hang.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c989056c3664.Ic3b77531d00b30b26dcd69c64e55ae2f60c3f31e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We need to skip sampling if the next sample time is after jiffies, not before.
This patch fixes an issue where in some cases only very little sampling (or none
at all) is performed, leading to really bad data rates
Fixes: 80d55154b2f8 ("mac80211: minstrel_ht: significantly redesign the rate probing strategy")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210617103854.61875-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.13-2021-06-16:
amdgpu:
- GFX9 and 10 powergating fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210616204913.4368-1-alexander.deucher@amd.com
|
|
Pull kvm fixes from Paolo Bonzini:
"Miscellaneous bugfixes.
The main interesting one is a NULL pointer dereference reported by
syzkaller ("KVM: x86: Immediately reset the MMU context when the SMM
flag is cleared")"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Fix kvm_check_cap() assertion
KVM: x86/mmu: Calculate and check "full" mmu_role for nested MMU
KVM: X86: Fix x86_emulator slab cache leak
KVM: SVM: Call SEV Guest Decommission if ASID binding fails
KVM: x86: Immediately reset the MMU context when the SMM flag is cleared
KVM: x86: Fix fall-through warnings for Clang
KVM: SVM: fix doc warnings
KVM: selftests: Fix compiling errors when initializing the static structure
kvm: LAPIC: Restore guard to prevent illegal APIC register access
|
|
The source (&dcbx_info->operational.params) and dest
(&p_hwfn->p_dcbx_info->set.config.params) are both struct qed_dcbx_params
(560 bytes), not struct qed_dcbx_admin_params (564 bytes), which is used
as the memcpy() size.
However it seems that struct qed_dcbx_operational_params
(dcbx_info->operational)'s layout matches struct qed_dcbx_admin_params
(p_hwfn->p_dcbx_info->set.config)'s 4 byte difference (3 padding, 1 byte
for "valid").
On the assumption that the size is wrong (rather than the source structure
type), adjust the memcpy() size argument to be 4 bytes smaller and add
a BUILD_BUG_ON() to validate any changes to the structure sizes.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-06-17
This series contains updates to ice driver only.
Jake corrects a couple of entries in the PTYPE table to properly
reflect the datasheet and removes unneeded NULL checks for some
PTP calls.
Paul reduces the scope of variables and removes the use of a local
variable.
Shaokun Zhang removes a duplicate function declaration.
Lorenzo Bianconi fixes a compilation warning if PTP_1588_CLOCK is
disabled.
Colin Ian King changes a for loop to remove an unneeded 'continue'.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Guangbin Huang says:
====================
net: hdlc_ppp: clean up some code style issues
This patchset clean up some code style issues.
---
Change Log:
V1 -> V2:
1. remove patch "net: hdlc_ppp: fix the comments style issue" and
patch "net: hdlc_ppp: remove redundant spaces" from this patchset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add space required after that ','.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes unnecessary out of memory message,
to fix the following checkpatch.pl warning:
"WARNING: Possible unnecessary 'out of memory' message"
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Should not use assignment in if condition.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the checkpatch error as "foo* bar" or "foo*bar" should be "foo *bar".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes the checkpatch error about missing a blank line
after declarations.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch removes some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ioana Ciornei says:
====================
net: mdio: setup both fwnode and of_node
The first patch in this series fixes a bug introduced by mistake in the
previous ACPI MDIO patch set.
The next two patches are adding a new helper which takes a device and a
fwnode_handle and populates both the of_node and fwnode so that we make
sure that a bug like this does not happen anymore.
Also, the new helper is used in the MDIO area.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the newly introduced helper to setup both the of_node and the
fwnode for a given device.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are many places where both the fwnode_handle and the of_node of a
device need to be populated. Add a function which does both so that we
have consistency.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By mistake, the of_node of the MDIO device was not setup in the patch
linked below. As a consequence, any PHY driver that depends on the
of_node in its probe callback was not be able to successfully finish its
probe on a PHY, thus the Generic PHY driver was used instead.
Fix this by actually setting up the of_node.
Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Store the information of the pipes to avoid calling usb_rcvctrlpipe(),
usb_sndctrlpipe(), usb_rcvbulkpipe(), usb_sndbulkpipe(), and
usb_rcvintpipe() frequently.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-06-17
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 25 day(s) which contain
a total of 148 files changed, 4779 insertions(+), 1248 deletions(-).
The main changes are:
1) BPF infrastructure to migrate TCP child sockets from a listener to another
in the same reuseport group/map, from Kuniyuki Iwashima.
2) Add a provably sound, faster and more precise algorithm for tnum_mul() as
noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan.
3) Streamline error reporting changes in libbpf as planned out in the
'libbpf: the road to v1.0' effort, from Andrii Nakryiko.
4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu.
5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map
types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek.
6) Support new LLVM relocations in libbpf to make them more linker friendly,
also add a doc to describe the BPF backend relocations, from Yonghong Song.
7) Silence long standing KUBSAN complaints on register-based shifts in
interpreter, from Daniel Borkmann and Eric Biggers.
8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when
target arch cannot be determined, from Lorenz Bauer.
9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson.
10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi.
11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF
programs to bpf_helpers.h header, from Florent Revest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Esben Haabendal says:
====================
net: gianfar: 64-bit statistics and rx_missed_errors counter
This series replaces the legacy 32-bit statistics to proper 64-bit ditto,
and implements rx_missed_errors counter on top of that.
The device supports a 16-bit RDRP counter, and a related carry bit and
interrupt, which allows implementation of a robust 64-bit counter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Devices with RMON support has a 16-bit RDRP counter. It provides: "Receive
dropped packets counter. Increments for frames received which are streamed
to system but are later dropped due to lack of system resources."
To handle more than 2^16 dropped packets, a carry bit in CAR1 register is
set on overflow, so we enable irq when this is set, extending the counter
to 2^64 for handling situations where lots of packets are missed (e.g.
during heavy network storms).
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These are for carry status and interrupt mask bits of statistics registers.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The memset on CAMx is wrong, as it actually unmasks all carry irq's,
which we clearly are not interested in.
The memset on CARx registers is just pointless, as they are W1C.
So let's just stop the memset before CAR1.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The CAR1 and CAR2 registers are W1C style registers, to the memset does not
actually clear them.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No reason to wrap counter values at 2^32. Especially the bytes counters
can wrap pretty fast on Gbit networks.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No reason to produce the legacy net_device_stats struct, only to have it
converted to rtnl_link_stats64. And as a bonus, this allows for improving
counter size to 64 bit.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When nla_put_u32() fails, 'ret' could be 0, it should
return error code in tcf_del_walker().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. of_node_put() on it before exiting
this function.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Th_strings arrays netdev_features_strings, tunable_strings, and
phy_tunable_strings has been moved to file net/ethtool/common.c.
So fixes the comment.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
when usbnet transmit a skb, eem fixup it in eem_tx_fixup(),
if skb_copy_expand() failed, it return NULL,
usbnet_start_xmit() will have no chance to free original skb.
fix it by free orginal skb in eem_tx_fixup() first,
then check skb clone status, if failed, return NULL to usbnet.
Fixes: 9f722c0978b0 ("usbnet: CDC EEM support (v5)")
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-06-16
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
My local syzbot instance hit memory leak in
mkiss_open()[1]. The problem was in missing
free_netdev() in mkiss_close().
In mkiss_open() netdevice is allocated and then
registered, but in mkiss_close() netdevice was
only unregistered, but not freed.
Fail log:
BUG: memory leak
unreferenced object 0xffff8880281ba000 (size 4096):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0.............
00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............
backtrace:
[<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
[<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80
[<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
[<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
[<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
[<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
[<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
[<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
[<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
BUG: memory leak
unreferenced object 0xffff8880141a9a00 (size 96):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(....
98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@..........
backtrace:
[<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310
[<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0
[<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0
[<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80
[<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
[<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
[<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
[<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
[<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
[<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
[<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
BUG: memory leak
unreferenced object 0xffff8880219bfc00 (size 512):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............
80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
[<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80
[<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
[<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
[<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
[<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
[<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
[<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
[<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
BUG: memory leak
unreferenced object 0xffff888029b2b200 (size 256):
comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81a27201>] kvmalloc_node+0x61/0xf0
[<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80
[<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1]
[<ffffffff842355db>] tty_ldisc_open+0x9b/0x110
[<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670
[<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440
[<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200
[<ffffffff8911263a>] do_syscall_64+0x3a/0xb0
[<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 815f62bf7427 ("[PATCH] SMP rewrite of mkiss")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: d6b6d9877878 ("be2net: use PCIe AER capability")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
build warnings
Fixes: 66826c43e63d ("documentation: networking: devlink: add prestera switched driver Documentation")
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the check for the u16 variable val being less than zero is
always false because val is unsigned. Fix this by using the int
variable for the assignment and less than zero check.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: f7380bba42fd ("net: pcs: xpcs: add support for NXP SJA1110")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
KVM_CHECK_EXTENSION ioctl can return any negative value on error,
and not necessarily -1. Change the assertion to reflect that.
Signed-off-by: Fuad Tabba <tabba@google.com>
Message-Id: <20210615150443.1183365-1-tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and fanotify fixes from Jan Kara:
"A fixup finishing disabling of quotactl_path() syscall (I've missed
archs using different way to declare syscalls) and a fix of an fd leak
in error handling path of fanotify"
* tag 'fixes_for_v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: finish disable quotactl_path syscall
fanotify: fix copy_event_to_user() fid error clean up
|
|
The continue statement in the for-loop is redundant. Re-work the hw_lock
check to remove it.
Addresses-Coverity: ("Continue has no effect")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix the following compilation warning if PTP_1588_CLOCK is not enabled
drivers/net/ethernet/intel/ice/ice_ptp.h:149:1:
error: return type defaults to ‘int’ [-Werror=return-type]
ice_ptp_request_ts(struct ice_ptp_tx *tx, struct sk_buff *skb)
Fixes: ea9b847cda647 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ptp_read_system_prets and ptp_read_system_postts functions already
check for the NULL value of the ptp_system_timestamp structure pointer.
There is no need to check this manually in the ice driver code. Remove
the checks.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Function 'ice_is_vsi_valid' is declared twice, remove the
repeated declaration.
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove the local variable since it's only used once. Instead, use it
directly.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There are some places where the scope of a variable can
be reduced so do that.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The entry for PTYPE 2 in the ice_ptype_lkup table incorrectly states
that this is an L2 packet with no payload. According to the datasheet,
this PTYPE is actually unused and reserved.
Fix the lookup entry to indicate this is an unused entry that is
reserved.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The entry for PTYPE 90 indicates that the payload is layer 3. This does
not match the specification in the datasheet which indicates the packet
is a MAC, IPv6, UDP packet, with a payload in layer 4.
Fix the lookup table to match the data sheet.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|