summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-03-27Merge tag 'mailbox-v5.18' of ↵Linus Torvalds
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: "qcom: - add support for MSM8976 mtk: - enable mt8186 - add ADSP controller driver ti: - use poll mode during suspend tegra: - fix tx channel flush imx: - add i.MX8 SECO MU support - prepare for, and add iMX93 support" * tag 'mailbox-v5.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: add definition for mt8186 mailbox: ti-msgmgr: Operate mailbox in polled mode during system suspend mailbox: ti-msgmgr: Refactor message read during interrupt handler mailbox: imx: support i.MX93 S401 MU mailbox: imx: support dual interrupts mailbox: imx: extend irq to an array dt-bindings: mailbox: imx-mu: add i.MX93 S4 MU support dt-bindings: mailbox: imx-mu: add i.MX93 MU mailbox: imx: add i.MX8 SECO MU support mailbox: imx: introduce rxdb callback dt-bindings: mailbox: imx-mu: add i.MX8 SECO MU support mailbox: imx: enlarge timeout while reading/writing messages to SCFW mailbox: imx: fix crash in resume on i.mx8ulp mailbox: imx: fix wakeup failure from freeze mode mailbox: mediatek: add support for adsp mailbox controller dt-bindings: mailbox: mtk,adsp-mbox: add mtk adsp-mbox document mailbox: qcom-apcs-ipc: Add compatible for MSM8976 SoC dt-bindings: mailbox: Add compatible for the MSM8976 mailbox: tegra-hsp: Flush whole channel
2022-03-27Merge tag 'leds-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "Nothing major here, there are two drivers that need review and did not make it into this round" * tag 'leds-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: pca955x: Allow zero LEDs to be specified leds: pca955x: Make the gpiochip always expose all pins leds: simatic-ipc-leds: Don't directly deref ioremap_resource() returned ptr leds: simatic-ipc-leds: Make simatic_ipc_led_mem_res static leds: lm3692x: Return 0 from remove callback leds: sgm3140: Add ocs,ocp8110 compatible dt-bindings: vendor-prefixes: Add ocs prefix dt-bindings: leds: common: fix unit address in max77693 example
2022-03-27Merge tag 'perf-tools-for-v5.18-2022-03-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools updates from Arnaldo Carvalho de Melo: "New features: perf ftrace: - Add -n/--use-nsec option to the 'latency' subcommand. Default: usecs: $ sudo perf ftrace latency -T dput -a sleep 1 # DURATION | COUNT | GRAPH | 0 - 1 us | 2098375 | ############################# | 1 - 2 us | 61 | | 2 - 4 us | 33 | | 4 - 8 us | 13 | | 8 - 16 us | 124 | | 16 - 32 us | 123 | | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 1 | | 256 - 512 us | 0 | | Better granularity with nsec: $ sudo perf ftrace latency -T dput -a -n sleep 1 # DURATION | COUNT | GRAPH | 0 - 1 us | 0 | | 1 - 2 ns | 0 | | 2 - 4 ns | 0 | | 4 - 8 ns | 0 | | 8 - 16 ns | 0 | | 16 - 32 ns | 0 | | 32 - 64 ns | 0 | | 64 - 128 ns | 1163434 | ############## | 128 - 256 ns | 914102 | ############# | 256 - 512 ns | 884 | | 512 - 1024 ns | 613 | | 1 - 2 us | 31 | | 2 - 4 us | 17 | | 4 - 8 us | 7 | | 8 - 16 us | 123 | | 16 - 32 us | 83 | | perf lock: - Add -c/--combine-locks option to merge lock instances in the same class into a single entry. # perf lock report -c Name acquired contended avg wait(ns) total wait(ns) max wait(ns) min wait(ns) rcu_read_lock 251225 0 0 0 0 0 hrtimer_bases.lock 39450 0 0 0 0 0 &sb->s_type->i_l... 10301 1 662 662 662 662 ptlock_ptr(page) 10173 2 701 1402 760 642 &(ei->i_block_re... 8732 0 0 0 0 0 &xa->xa_lock 8088 0 0 0 0 0 &base->lock 6705 0 0 0 0 0 &p->pi_lock 5549 0 0 0 0 0 &dentry->d_lockr... 5010 4 1274 5097 1844 789 &ep->lock 3958 0 0 0 0 0 - Add -F/--field option to customize the list of fields to output: $ perf lock report -F contended,wait_max -k avg_wait Name contended max wait(ns) avg wait(ns) slock-AF_INET6 1 23543 23543 &lruvec->lru_lock 5 18317 11254 slock-AF_INET6 1 10379 10379 rcu_node_1 1 2104 2104 &dentry->d_lockr... 1 1844 1844 &dentry->d_lockr... 1 1672 1672 &newf->file_lock 15 2279 1025 &dentry->d_lockr... 1 792 792 - Add --synth=no option for record, as there is no need to symbolize, lock names comes from the tracepoints. perf record: - Threaded recording, opt-in, via the new --threads command line option. - Improve AMD IBS (Instruction-Based Sampling) error handling messages. perf script: - Add 'brstackinsnlen' field (use it with -F) for branch stacks. - Output branch sample type in 'perf script'. perf report: - Add "addr_from" and "addr_to" sort dimensions. - Print branch stack entry type in 'perf report --dump-raw-trace' - Fix symbolization for chrooted workloads. Hardware tracing: Intel PT: - Add CFE (Control Flow Event) and EVD (Event Data) packets support. - Add MODE.Exec IFLAG bit support. Explanation about these features from the "Intel® 64 and IA-32 architectures software developer’s manual combined volumes: 1, 2A, 2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at: https://cdrdv2.intel.com/v1/dl/getContent/671200 At page 3951: "32.2.4 Event Trace is a capability that exposes details about the asynchronous events, when they are generated, and when their corresponding software event handler completes execution. These include: o Interrupts, including NMI and SMI, including the interrupt vector when defined. o Faults, exceptions including the fault vector. - Page faults additionally include the page fault address, when in context. o Event handler returns, including IRET and RSM. o VM exits and VM entries.¹ - VM exits include the values written to the “exit reason” and “exit qualification” VMCS fields. INIT and SIPI events. o TSX aborts, including the abort status returned for the RTM instructions. o Shutdown. Additionally, it provides indication of the status of the Interrupt Flag (IF), to indicate when interrupts are masked" ARM CoreSight: - Use advertised caps/min_interval as default sample_period on ARM spe. - Update deduction of TRCCONFIGR register for branch broadcast on ARM's CoreSight ETM. Vendor Events (JSON): Intel: - Update events and metrics for: Alderlake, Broadwell, Broadwell DE, BroadwellX, CascadelakeX, Elkhartlake, Bonnell, Goldmont, GoldmontPlus, Westmere EP-DP, Haswell, HaswellX, Icelake, IcelakeX, Ivybridge, Ivytown, Jaketown, Knights Landing, Nehalem EP, Sandybridge, Silvermont, Skylake, Skylake Server, SkylakeX, Tigerlake, TremontX, Westmere EP-SP, and Westmere EX. ARM: - Add support for HiSilicon CPA PMU aliasing. perf stat: - Fix forked applications enablement of counters. - The 'slots' should only be printed on a different order than the one specified on the command line when 'topdown' events are present, fix it. Miscellaneous: - Sync msr-index, cpufeatures header files with the kernel sources. - Stop using some deprecated libbpf APIs in 'perf trace'. - Fix some spelling mistakes. - Refactor the maps pointers usage to pave the way for using refcount debugging. - Only offer the --tui option on perf top, report and annotate when perf was built with libslang. - Don't mention --to-ctf in 'perf data --help' when not linking with the required library, libbabeltrace. - Use ARRAY_SIZE() instead of ad hoc equivalent, spotted by array_size.cocci. - Enhance the matching of sub-commands abbreviations: 'perf c2c rec' -> 'perf c2c record' 'perf c2c recport -> error - Set build-id using build-id header on new mmap records. - Fix generation of 'perf --version' string. perf test: - Add test for the arm_spe event. - Add test to check unwinding using fame-pointer (fp) mode on arm64. - Make metric testing more robust in 'perf test'. - Add error message for unsupported branch stack cases. libperf: - Add API for allocating new thread map array. - Fix typo in perf_evlist__open() failure error messages in libperf tests. perf c2c: - Replace bitmap_weight() with bitmap_empty() where appropriate" * tag 'perf-tools-for-v5.18-2022-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (143 commits) perf evsel: Improve AMD IBS (Instruction-Based Sampling) error handling messages perf python: Add perf_env stubs that will be needed in evsel__open_strerror() perf tools: Enhance the matching of sub-commands abbreviations libperf tests: Fix typo in perf_evlist__open() failure error messages tools arm64: Import cputype.h perf lock: Add -F/--field option to control output perf lock: Extend struct lock_key to have print function perf lock: Add --synth=no option for record tools headers cpufeatures: Sync with the kernel sources tools headers cpufeatures: Sync with the kernel sources perf stat: Fix forked applications enablement of counters tools arch x86: Sync the msr-index.h copy with the kernel sources perf evsel: Make evsel__env() always return a valid env perf build-id: Fix spelling mistake "Cant" -> "Can't" perf header: Fix spelling mistake "could't" -> "couldn't" perf script: Add 'brstackinsnlen' for branch stacks perf parse-events: Move slots only with topdown perf ftrace latency: Update documentation perf ftrace latency: Add -n/--use-nsec option perf tools: Fix version kernel tag ...
2022-03-27Merge tag 'memblock-v5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock updates from Mike Rapoport: "Test suite and a small cleanup: - A small cleanup of unused variable in __next_mem_pfn_range_in_zone - Initial test suite to simulate memblock behaviour in userspace" * tag 'memblock-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: (27 commits) memblock tests: Add TODO and README files memblock tests: Add memblock_alloc_try_nid tests for bottom up memblock tests: Add memblock_alloc_try_nid tests for top down memblock tests: Add memblock_alloc_from tests for bottom up memblock tests: Add memblock_alloc_from tests for top down memblock tests: Add memblock_alloc tests for bottom up memblock tests: Add memblock_alloc tests for top down memblock tests: Add simulation of physical memory memblock tests: Split up reset_memblock function memblock tests: Fix testing with 32-bit physical addresses memblock: __next_mem_pfn_range_in_zone: remove unneeded local variable nid memblock tests: Add memblock_free tests memblock tests: Add memblock_add_node test memblock tests: Add memblock_remove tests memblock tests: Add memblock_reserve tests memblock tests: Add memblock_add tests memblock tests: Add memblock reset function memblock tests: Add skeleton of the memblock simulator tools/include: Add debugfs.h stub tools/include: Add pfn.h stub ...
2022-03-27s390/pci: rename get_zdev_by_bus() to zdev_from_bus()Niklas Schnelle
Getting a zpci_dev via get_zdev_by_bus() uses the long lived reference held in zbus->function[devfn]. This is accounted for in pcibios_add_device() and pcibios_release_device(). Therefore there is no need to increment the reference count in get_zdev_by_bus() as is done for get_zdev_by_fid(). Instead callers must not access the device after pcibios_release_device() was called which is necessary for common PCI code anyway. With this though the very similar naming may be misleading so rename get_zdev_by_bus() to zdev_from_bus() emphasizing that we are directly referencing the zdev via the bus. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/pci: improve zpci_dev reference countingNiklas Schnelle
Currently zpci_dev uses kref based reference counting but only accounts for one original reference plus one reference from an added pci_dev to its underlying zpci_dev. Counting just the original reference worked until the pci_dev reference was added in commit 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev") because once a zpci_dev goes away, i.e. enters the reserved state, it would immediately get released. However with the pci_dev reference this is no longer the case and the zpci_dev may still appear in multiple availability events indicating that it was reserved. This was solved by detecting when the zpci_dev is already on its way out but still hanging around. This has however shown some light on how unusual our zpci_dev reference counting is. Improve upon this by modelling zpci_dev reference counting on pci_dev. Analogous to pci_get_slot() increment the reference count in get_zdev_by_fid(). Thus all users of get_zdev_by_fid() must drop the reference once they are done with the zpci_dev. Similar to pci_scan_single_device(), zpci_create_device() returns the device with an initial count of 1 and the device added to the zpci_list (analogous to the PCI bus' device_list). In turn users of zpci_create_device() must only drop the reference once the device is gone from the point of view of the zPCI subsystem, it might still be referenced by the common PCI subsystem though. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/smp: use physical address for SIGP_SET_PREFIX commandAlexander Gordeev
Signal processor SIGP_SET_PREFIX command expects physical address of the lowcore to be installed, but instead the virtual address is provided. Note: this does not fix a bug currently, since virtual and physical addresses are identical. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390: cleanup timer API useYu Liao
cleanup the s390's use of the timer API - del_timer() contains timer_pending() condition - mod_timer(timer, expires) is equivalent to: del_timer(timer); timer->expires = expires; add_timer(timer); If the timer is inactive it will be activated, using add_timer() on condition !timer_pending(&private->timer) is redundant. Just cleanup, no logic change. Signed-off-by: Yu Liao <liaoyu15@huawei.com> Link: https://lore.kernel.org/r/20220322030057.1243196-1-liaoyu15@huawei.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/zcrypt: fix using the correct variable for sizeof()Jakob Koschel
While the original code is valid, it is not the obvious choice for the sizeof() call and in preparation to limit the scope of the list iterator variable the sizeof should be changed to the size of the variable being allocated. Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/vfio-ap: fix kernel doc and signature of group notifier functionsTony Krowiak
The vfio_ap device driver registers a group notifier function to handle the VFIO_GROUP_NOTIFY_SET_KVM event signalling the KVM pointer has been set or cleared. There are two helper functions invoked by the handler function: One called when the KVM pointer has been set, and the other when the pointer is cleared. The kernel doc for both of these functions contains a comment introduced by commit 0cc00c8d4050 (s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks) that is no longer valid. This patch removes this comment from the kernel doc of each helper function. Commit 86956e70761b (s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification) added a parameter to the signature of the helper function that handles the event indicating the KVM pointer has been cleared. The parameter added was the KVM pointer itself. One of the function's primary purposes is to clear the KVM pointer from the ap_matrix_mdev instance in which it is stored. Since the callers of this function derive the KVM pointer passed to the function from the ap_matrix_mdev object itself, it is completely unnecessary to include this parameter in the function's signature since it can simply be retrieved from the ap_matrix_mdev object which is also passed in. This patch removes the KVM pointer from the function's signature. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/maccess: rework absolute lowcore accessorsAlexander Gordeev
Macro mem_assign_absolute() is able to access the whole memory, but is only used and makes sense when updating the absolute lowcore. Instead, introduce get_abs_lowcore() and put_abs_lowcore() macros that limit access to absolute lowcore addresses only. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/smp: cleanup control register update routinesAlexander Gordeev
Get rid of duplicate code and redundant data. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/smp: cleanup target CPU callback startingAlexander Gordeev
Macro mem_assign_absolute() is used to initialize a target CPU lowcore callback parameters. But despite the macro name it writes to the absolute lowcore only if the target CPU is offline. In case the CPU is online the macro does implicitly write to the normal memory. That behaviour is correct, but extremely subtle. Sacrifice few program bits in favour of clarity and distinguish between online vs offline CPUs and normal vs absolute lowcore pointer. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/test_unwind: verify __kretprobe_trampoline is replacedVasily Gorbik
Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/unwind: avoid duplicated unwinding entries for kretprobesVasily Gorbik
Currently when unwinding starts from pt_regs or encounters pt_regs along the way unwinder tries to yield 2 unwinding entries: 1. (reliable) ip1: pt_regs->psw.addr, sp1: regs->gprs[15] 2. (non-reliable) ip2: sp1->gprs[8] (r14), sp2: regs->gprs[15] In case of kretprobes those are identical and serves no other purpose than causing confusion over duplicated entries and cause kprobes tests to fail. So, skip a duplicate non-reliable entry in this case. With that kretprobes and unwinder implementation now comply with ARCH_CORRECT_STACKTRACE_ON_KRETPROBE. Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/unwind: recover kretprobe modified return address in stacktraceVasily Gorbik
Based on commit cd9bc2c92588 ("arm64: Recover kretprobe modified return address in stacktrace"). """ Since the kretprobe replaces the function return address with the __kretprobe_trampoline on the stack, stack unwinder shows it instead of the correct return address. This checks whether the next return address is the __kretprobe_trampoline(), and if so, try to find the correct return address from the kretprobe instance list. """ Original patch series: https://lore.kernel.org/all/163163030719.489837.2236069935502195491.stgit@devnote2/ Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/kprobes: enable kretprobes framepointer verificationVasily Gorbik
Use regs->gprs[15] for framepointer verification. This enables additional sanity checks for nested kretprobes. Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/test_unwind: extend kretprobe testVasily Gorbik
Verify unwinding from kretprobed function. Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/ap: adjust whitespaceHeiko Carstens
Adjust indentation of inline assemblies, so all comments start at the same position. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/ap: use insn format for new instructionsHeiko Carstens
Use insn format with instruction format specifier instead of plain longs. This way it is also more obvious that code instead of data is generated. The generated code is identical. Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/alternatives: use insn format for new instructionsHeiko Carstens
Use insn format with instruction format specifier instead of plain longs. This way it is also more obvious that code instead of data is generated. The generated code is identical. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/alternatives: use instructions instead of byte patternsHeiko Carstens
Use readable nop instructions within the code which generates the padding areas, instead of unreadable byte patterns. The generated code is identical. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/traps: improve panic message for translation-specification exceptionHeiko Carstens
There are many different types of translation exceptions but only a translation-specification exception leads to a kernel panic since it indicates corrupted page tables, which must never happen. Improve the panic message so it is a bit more obvious what this is about. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/tape: use bitwise instead of arithmetic operator for flagsHaowen Bai
This silences the following coccinelle warning: drivers/s390/char/tape_34xx.c:360:38-39: WARNING: sum of probable bitmasks, consider | Signed-off-by: Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1647334421-29989-1-git-send-email-baihaowen@meizu.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390: fix typo in syscall_wrapper.hRussell Currey
Looks like this endif comment was erroneously unchanged when copied over from the x86 version. Signed-off-by: Russell Currey <ruscur@russell.cc> Link: https://lore.kernel.org/r/20220304090109.29386-1-ruscur@russell.cc Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390: crypto: Use min_t() instead of doing it manuallyHaowen Bai
Fix following coccicheck warning: drivers/s390/crypto/zcrypt_ep11misc.c:1112:25-26: WARNING opportunity for min() Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/pkey: fix typos in commentsJulia Lawall
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Harald Freudenberger <freude@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/zcrypt: Filter admin CPRBs on custom devicesJuergen Christ
Add a filter for custom devices to check for allowed control domains of admin CPRBs. This filter only applies to custom devices and not to the main device. Signed-off-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/zcrypt: Add admask to zcdnJuergen Christ
Zcrypt custom devices now support control domain masks. Users can set and modify this mask to allow custom devices to access certain control domains. Signed-off-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27x86/config: Make the x86 defconfigs a bit more usableIngo Molnar
- Use 'make savedefconfig' to refresh & regenerate the files - Add in KVM boot enablers - Enable the cgroup features most distros rely on [ fix bug found by Nathan Chancellor ] Acked-by: Nathan Chancellor <nathan@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/YjwsUT/6PkRPjnHE@gmail.com
2022-03-27Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC updates from Stafford Horne: "Not much for OpenRISC this merge window, I do have some things on the back burner like sparse warning cleanups and new defconfigs. But I didn't get time to polish the patches off for this round. There are OpenRISC updates coming in via other queues like removal of set_fs() and possibly new generic ticket locks. This just has a small fixup to remove duplicate initializer in memcpy from Kuniyuki Iwashima" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc/boot: Remove unnecessary initialisation in memcpy().
2022-03-27Merge tag 'x86_core_for_5.18_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra: "Add support for Intel CET-IBT, available since Tigerlake (11th gen), which is a coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP. Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is limited to 2 instructions (and typically fewer) on branch targets not starting with ENDBR. CET-IBT also limits speculation of the next sequential instruction after the indirect CALL/JMP [1]. CET-IBT is fundamentally incompatible with retpolines, but provides, as described above, speculation limits itself" [1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html * tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits) kvm/emulate: Fix SETcc emulation for ENDBR x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0 x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0 kbuild: Fixup the IBT kbuild changes x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy x86: Remove toolchain check for X32 ABI capability x86/alternative: Use .ibt_endbr_seal to seal indirect calls objtool: Find unused ENDBR instructions objtool: Validate IBT assumptions objtool: Add IBT/ENDBR decoding objtool: Read the NOENDBR annotation x86: Annotate idtentry_df() x86,objtool: Move the ASM_REACHABLE annotation to objtool.h x86: Annotate call_on_stack() objtool: Rework ASM_REACHABLE x86: Mark __invalid_creds() __noreturn exit: Mark do_group_exit() __noreturn x86: Mark stop_this_cpu() __noreturn objtool: Ignore extra-symbol code objtool: Rename --duplicate to --lto ...
2022-03-27Watchdog: sp5100_tco: Enable Family 17h+ CPUsTerry Bowman
The driver currently uses a CPU family match of 17h to determine EFCH_PM_DECODEEN_WDT_TMREN register support. This family check will not support future AMD CPUs and instead will require driver updates to add support. Remove the family 17h family check and add a check for SMBus PCI revision ID 0x51 or greater. The MMIO access method has been available since at least SMBus controllers using PCI revision 0x51. This revision check will support family 17h and future AMD processors including EFCH functionality without requiring driver changes. Co-developed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220202153525.1693378-5-terry.bowman@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27Watchdog: sp5100_tco: Add initialization using EFCH MMIOTerry Bowman
cd6h/cd7h port I/O can be disabled on recent AMD hardware. Read accesses to disabled cd6h/cd7h port I/O will return F's and written data is dropped. It is recommended to replace the cd6h/cd7h port I/O with MMIO. Co-developed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220202153525.1693378-4-terry.bowman@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27Watchdog: sp5100_tco: Refactor MMIO base address initializationTerry Bowman
Combine MMIO base address and alternate base address detection. Combine based on layout type. This will simplify the function by eliminating a switch case. Move existing request/release code into functions. This currently only supports port I/O request/release. The move into a separate function will make it ready for adding MMIO region support. Co-developed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220202153525.1693378-3-terry.bowman@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27Watchdog: sp5100_tco: Move timer initialization into functionTerry Bowman
Refactor driver's timer initialization into new function. This is needed inorder to support adding new device layouts while using common timer initialization. Co-developed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Robert Richter <rrichter@amd.com> Signed-off-by: Terry Bowman <terry.bowman@amd.com> Tested-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220202153525.1693378-2-terry.bowman@amd.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: ixp4xx: Implement restartLinus Walleij
Implement watchdog restart in the IXP4xx watchdog timer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220206230028.476659-1-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: orion_wdt: support pretimeout on Armada-XPChris Packham
Commit e07a4c79ca75 ("watchdog: orion_wdt: use timer1 as a pretimeout") added support for a pretimeout on Armada-38x variants. Because the Armada-XP variants use armada370_start/armada370_stop (due to missing an explicit RSTOUT mask bit for the watchdog). Add the required pretimeout support to armada370_start/armada370_stop for Armada-XP. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220211003257.2037332-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: allow building BCM7038_WDT for BCM4908Rafał Miłecki
BCM4908 is a SoCs family that shares a lot of hardware with BCM63xx including the watchdog block. Allow building this driver for it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220209203202.26395-1-zajec5@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: renesas_wdt: Add R-Car Gen4 supportThanh Quan
Add the compatible string for the R-Car Gen4 family. No further driver changes are needed. Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/cc395105e1d34aab2c076d368c0737833970b9d2.1642525158.git.geert+renesas@glider.be Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27dt-bindings: watchdog: renesas-wdt: Document r8a779f0 supportThanh Quan
Document support for the Watchdog Timer (WDT) Controller in the Renesas R-Car S4-8 (R8A779F0) SoC. Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/cca61a83ae82ecf5c23eb28e30c39f2f661f0e02.1642525158.git.geert+renesas@glider.be Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: Improve watchdog_dev function documentationDaniel Bristot de Oliveira
Adjust function comments to the kernel doc format. It also adjusts some variable names and adds return values. No functional change. Changes from V1: Change "Returns" to "Return:" (Randy Dunlap) Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/30378a03e9cd9b5f6e92ec9bf512edc38bad8627.1644589712.git.bristot@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: aspeed: add nowayout supportEduardo Valentin
Add support for not stopping the watchdog when the userspace application quits. At closing of the device, the driver cannot determine if this was a graceful closure or if the app crashed. If the support of nowayout on this driver, the system integrator can select the behaviour by setting the kernel config and enabling it. Cc: Wim Van Sebroeck <wim@linux-watchdog.org> (maintainer:WATCHDOG DEVICE DRIVERS) Cc: Guenter Roeck <linux@roeck-us.net> (maintainer:WATCHDOG DEVICE DRIVERS) Cc: Joel Stanley <joel@jms.id.au> (supporter:ARM/ASPEED MACHINE SUPPORT) Cc: Andrew Jeffery <andrew@aj.id.au> (reviewer:ARM/ASPEED MACHINE SUPPORT) Cc: linux-watchdog@vger.kernel.org (open list:WATCHDOG DEVICE DRIVERS) Cc: linux-arm-kernel@lists.infradead.org (moderated list:ARM/ASPEED MACHINE SUPPORT) Cc: linux-aspeed@lists.ozlabs.org (moderated list:ARM/ASPEED MACHINE SUPPORT) Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by: Eduardo Valentin <eduval@amazon.com> Signed-off-by: Eduardo Valentin <evalenti@kernel.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220212021033.2344-1-eduval@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: rti-wdt: Add missing pm_runtime_disable() in probe functionMiaoqian Lin
If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220105092114.23932-1-linmq006@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27watchdog: imx2_wdg: Alow ping on suspendAlistair Francis
The i.MX watchdog cannot be disabled by software once it has been enabled. This means that it can't be stopped before suspend. For systems that enter low power mode this is fine, as the watchdog will be automatically stopped by hardware in low power mode. Not all i.MX platforms support low power mode in the mainline kernel. For example the i.MX7D does not enter low power mode and so will be rebooted 2 minutes after entering sleep states. This patch introduces a device tree property "fsl,ping-during-suspend" that can be used to enable ping on suspend support for these systems. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220127104739.312592-1-alistair@alistair23.me Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-03-27pinctrl: mediatek: common-v1: fix semicolon.cocci warningskernel test robot
drivers/pinctrl/mediatek/pinctrl-mtk-common.c:171:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: 156f721704b5 ("pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback") CC: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20220322130308.GA21877@65fc916127a5 Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-27ALSA: cs4236: fix an incorrect NULL check on list iteratorXiaomeng Tong
The bug is here: err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev); The list iterator value 'cdev' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'cdev' as a dedicated pointer to point to the found element. And snd_card_cs423x_pnp() itself has NULL check for cdev. Cc: stable@vger.kernel.org Fixes: c2b73d1458014 ("ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220327060822.4735-1-xiam0nd.tong@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-03-27ALSA: hda/realtek: Enable headset mic on Lenovo P360Kai-Heng Feng
Lenovo P360 is another platform equipped with ALC897, and it needs ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220325160501.705221-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-03-26smb3: move defines for query info and query fsinfo to smbfs_commonSteve French
Includes moving to common code (from cifs and ksmbd protocol related headers) - query and query directory info levels and structs - set info structs - SMB2 lock struct and flags - SMB2 echo req Also shorten a few flag names (e.g. SMB2_LOCKFLAG_EXCLUSIVE_LOCK to SMB2_LOCKFLAG_EXCLUSIVE) Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-03-26smb3: move defines for ioctl protocol header and SMB2 sizes to smbfs_commonSteve French
The definitions for the ioctl SMB3 request and response as well as length of various fields defined in the protocol documentation were duplicated in fs/ksmbd and fs/cifs. Move these to the common code in fs/smbfs_common/smb2pdu.h Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 05:45:02 +0000