summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-07mwifiex: schedule main workqueue for transmitting bridge packetsXinming Hu
Bridge packets are enqueued to wmm tx queue, but will not be sent until main workqeue is scheduled for new interrupt or other reason. This adds unnecessary delay during traffic. We will schedule main workqueue when bridge packet is queued. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: remove redundant GFP_DMA flagXinming Hu
skb forwarded to TCP/IP stack doesn't need to allocate in DMA ZONE. This patch removes GFP_DMA flag in this case to save precious DMA memory. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: check revision id while choosing PCIe firmwareShengzhen Li
Some of the chipsets have two revisions. This patch selects appropriate firmware by checking revision id. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: add support for wakeup on GTK rekey failureGanapathi Bhat
User can configure wakeup on GTK rekey fail with wowlan. Added corresponding wakeup reason. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: add support for GTK rekey offloadGanapathi Bhat
Added driver functionality to offload GTK rekey to firmware. When AP sends new GTK, firmware will update it. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Do not set LDOA15 / LDOV12 on 8192euJes Sorensen
Per the vendor driver, it looks like the 8192eu doesn't have LDOA15 / LDOV12 registers. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Use correct H2C calls for 8192euJes Sorensen
The 8192eu uses the same H2C API as the 8723bu. Call the correct functions for update_rate_mask() and report_connect(). Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Identify 8192eu rev A/B parts correctlyJes Sorensen
8192eu A/B cut parts were incorrectly identified as 8192cu devices. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Use enums for chip version numbersJes Sorensen
With support for more chips being added, use an enum to specify the chip version. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Update some register definitionsJes Sorensen
Improve descriptive names of some registers and add some additional registers only found on nextgen chips. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: 8192eu uses txdesc40Jes Sorensen
8192eu uses the new TX descriptor format Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: TXDESC_SHORT_GI is txdesc32 onlyJes Sorensen
This is no short GI bit in the txdesc40 format. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Correct txdesc40 gid definitionJes Sorensen
txdesc40 dword2 gid is a 6 bit field, not a single bit Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Rename TX descriptor bits to map them to 32/40 byte descriptorsJes Sorensen
With the size based naming of TX descriptors. Change the bit definition namings to indicate which descriptor format they match, rather than having a device name in the bit name. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl8xxxu: Change name of struct tx_desc to be more decriptiveJes Sorensen
There are two major types of TX descriptor formats for the RTL parts, the old 32 byte descriptor, and the newer 40 byte descriptor used by the 8723bu, 8192eu, and 88xx series. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: fix NULL pointer dereference errorWei-Ning Huang
In mwifiex_enable_hs, we need to check if priv->wdev.wiphy->wowlan_config is NULL before accessing its member. This sometimes cause kernel panic when suspend/resume. Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07mwifiex: ie_list is an array, so no need to check if NULLColin Ian King
ap_ie->ie_list is an array of struct mwifiex_ie and can never be null, so the null check on this array is redundant and can be removed. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07iwl4965: Fix more memory leaks in __il4965_up()Julian Calaby
In some of the non-success return paths, the memory allocated by iwl4965_sta_alloc_lq() in iwl4965_alloc_bcast_station() is not freed. In particular: - if the card isn't ready after il4965_prepare_card_hw() - if the card is hardware-rfkilled In the hardware rfkilled path, the driver enables the rfkill interrupt. When the card is unrfkilled and this interrupt is raised we end up calling il4965_bg_restart() which calls __il4965_up() which calls iwl4965_alloc_bcast_station() again. Suggested-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07iwl4965: Fix a memory leak in error handling code of __il4965_upJia-Ju Bai
When il4965_hw_nic_init in __il4965_up fails, the memory allocated by iwl4965_sta_alloc_lq in iwl4965_alloc_bcast_station is not freed. This patches adds il_dealloc_bcast_stations in the error handling code of __il4965_up to fix this problem. This patch has been tested in real device, and it actually fixes the bug. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rsi: Move variable initialisation into error codeMarkus Elfring
In rsi_send_data_pkt(), it's a little more logical to assign 'status' in the actual error handling code as opposed to at the top of the functon. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [Deleted controversial bits, rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rsi: Delete unnecessary variable initialisationMarkus Elfring
In rsi_send_data_pkt(), the following variables are assigned to before they're used: * tmp_hdr - Assigned on line 47, first used on line 48 * bss - Assigned on line 41, first used on line 44 * extnd_size - Assigned on line 50, first used on line 52 * seq_num - Assigned on line 48, first used on line 96 Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rsi: Delete unnecessary variable initialisationMarkus Elfring
In rsi_send_mgmt_pkt(), the following variables are assigned to before they're used: * wh - Assigned on line 161, first used on line 180 * bss - Assigned on line 160, first used on line 196 * msg - Assigned on line 168, first used on line 175 * extnd_size - Assigned on line 139, first used on line 142 Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtl818x_pci: Disable pci device in error handling codeJia-Ju Bai
When pci_request_regions in rtl8180_probe fails, pci_disable_device is not called to disable the device which is enabled by pci_enbale_device. This patch fixes the problem by adding a new lable in error handling code. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07b43: Fix memory leaks in b43_bus_dev_ssb_init and b43_bus_dev_bcma_initJia-Ju Bai
The memory allocated by kzalloc in b43_bus_dev_ssb_init and b43_bus_dev_bcma_init is not freed. This patch fixes the bug by adding kfree in b43_ssb_remove, b43_bcma_remove and error handling code of b43_bcma_probe. Thanks Michael for his suggestion. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07iwl4965: Fix a null pointer dereference in il_tx_queue_free and ↵Jia-Ju Bai
il_cmd_queue_free If "txq->cmd = kzalloc(...)" in il_tx_queue_init fails, "kfree(txq->cmd[i])" in il_tx_queue_free and il_cmd_queue_free in iwl4965_hw_txq_ctx_free will causes a null pointer dereference, because txq->cmd is NULL at that time. This patch fixes this problem by adding a if-check before kfree. To avoid double free in il_tx_queue_free and il_cmd_queue_free caused by the fixing, txq->meta and txq->cmd in error handling code of il_tx_queue_init are assigned null values. Otherwise, a double free will occur. This patch has been tested in real device, and it actually fixes the bug. Thanks Stanislaw for his suggestion. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07iwlegacy: Return directly if allocation fails in il_eeprom_init()Markus Elfring
Also remove an unused label. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07brcmfmac: Delete unnecessary variable initialisationMarkus Elfring
In brcmf_sdio_download_firmware(), bcmerror is set by the call to brcmf_sdio_download_code_file(), before it's checked in the following line. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Arend van Spriel <arend@broadcom.com> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07ath9k_htc: Delete unnecessary variable initialisationMarkus Elfring
In ath9k_hif_usb_rx_stream(), i is initialised in the for loop it's used in. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de> [Rewrote commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07rtlwifi: use to_delayed_work()Geliang Tang
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> [Update commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07wl1251: use to_delayed_work()Geliang Tang
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> [Update commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07wlcore: use to_delayed_work()Geliang Tang
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> [Update commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07ipw2x00: use to_pci_dev()Geliang Tang
Use to_pci_dev() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Acked-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07ath9k: Remove unnecessary ?: operatorIvan Safonov
"(thermometer < 0) ? 0 : (thermometer == X)" is equivalent to "thermometer == X" for X >= 0. Signed-off-by: Ivan Safonov <insafonov@gmail.com> [Updated commit message] Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-07tcp/dccp: fix inet_reuseport_add_sock()Eric Dumazet
David Ahern reported panics in __inet_hash() caused by my recent commit. The reason is inet_reuseport_add_sock() was still using sk_nulls_for_each_rcu() instead of sk_for_each_rcu(). SO_REUSEPORT enabled listeners were causing an instant crash. While chasing this bug, I found that I forgot to clear SOCK_RCU_FREE flag, as it is inherited from the parent at clone time. Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2016-04-06 This series contains updates to e1000, e1000e, igb and Kconfig. Alex fixes igb where we were casting the MAC address as __beXX and then passing it into le32_to_cpu, when we could simply cast as __lexx to maintain consistency since it is already little endian. Then enabled bulk free in transmit cleanup for igb. John Holland enables igb to pickup the MAC address from a device tree blob when CONFIG_OF has been enabled. Doron Shikmoni fixes a bug in the output of "ethtool -m ethX" where the data byte appeared duplicated. Stefan fixes up e1000 and e1000e ethtool offline tests which were calling dev_close() which causes IFF_UP to be cleared which removes teh interface routes and some addresses, so use ndo_stop() instead. Jiri Benc cleans up some old links in the Kconfig for Intel drivers where we referred to a URL which is no longer valid. I am so glad Jiri has the time in his day to spend clicking on and testing all the URL links in the the kernel. Arika Chen reverts the addition of a 'rtnl_unlock()' which had a unmatched 'rtnl_lock()' call before it. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-07ath10k: fix unconditional num_mpdus_ready subtractionRajkumar Manoharan
Decrement num_mpdus_ready only when rx amsdu is processed successfully. Not doing so, will result in leak and impact stabilty under low memory cases. Also commit 3128b3d8a2b9 ("ath10k: speedup htt rx descriptor processing for rx_ind") missed to removed unused skb list rx_q. Fixes: 3128b3d8a2b9 ("ath10k: speedup htt rx descriptor processing for rx_ind") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-07ath10k: remove unnecessary warning for probe response dropsRajkumar Manoharan
qca99x0 and qca4019 solutions limit probe responses transmissions. Logging warning message for each probe response drop is flooding kernel log unnecessary with " failed to increase tx mgmt pending count: -16, dropping". Hence reducing log level to debug. Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-07ath10k: fix calibration init sequence of qca99x0Rajkumar Manoharan
pre-calibration is meant for qca4019 which contains only caldata whereas calibration file is used by ar9888 and qca99x0 that contains both board data and caldata. So by definition both pre-cal-file and cal-file can not coexist. Keeping them in shared memory (union), is breaking boot sequence of qca99x0. Fix it by storing both binaries in separate memories. This issue is reported in ipq8064 platform which includes caldata in flash memory. Fixes: 3d9195ea19e4 ("ath10k: incorporate qca4019 cal data download sequence") Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-07Merge tag 'fixes-for-v4.6-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.6-rc3 We have two more fixes to f_midi. It should now behave much better. dwc3-keystone.c has gotten a fix which now allows it to work on keystone device when running in peripheral mode. A similar fix for DMA configuration was made for udc-core, too. We have a new PCI ID for Intel's Broxton platform. DWC3 can run on those platforms as well. And we also have some dwc2 got a fix for dr_mode usage, while renesas controller got 3 important fixes: a NULL pointer deref fix, IRQ <-> DMA race fix, and a fix to prevent a situation where we would queue a request to a disabled endpoint.
2016-04-07iommu/vt-d: Silence an uninitialized variable warningDan Carpenter
My static checker complains that "dma_alias" is uninitialized unless we are dealing with a pci device. This is true but harmless. Anyway, we can flip the condition around to silence the warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07iommu/rockchip: Fix "is stall active" checkJohn Keeping
Since commit cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") rk_iommu_is_stall_active() always returns false because the bitwise AND operates on the boolean flag promoted to an integer and a value that is either zero or BIT(2). Explicitly convert the right-hand value to a boolean so that both sides are guaranteed to be either zero or one. rk_iommu_is_paging_enabled() does not suffer from the same problem since RK_MMU_STATUS_PAGING_ENABLED is BIT(0), but let's apply the same change for consistency and to make it clear that it's correct without needing to lookup the value. Fixes: cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07iommu: Don't overwrite domain pointer when there is no default_domainJoerg Roedel
IOMMU drivers that do not support default domains, but make use of the the group->domain pointer can get that pointer overwritten with NULL on device add/remove. Make sure this can't happen by only overwriting the domain pointer when it is NULL. Cc: stable@vger.kernel.org # v4.4+ Fixes: 1228236de5f9 ('iommu: Move default domain allocation to iommu_group_get_for_dev()') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-04-07virtio: add VIRTIO_CONFIG_S_NEEDS_RESET device status bitStefan Hajnoczi
The VIRTIO 1.0 specification added the DEVICE_NEEDS_RESET device status bit in "VIRTIO-98: Add DEVICE_NEEDS_RESET". This patch defines the device status bit in the uapi header file so that both the kernel and userspace applications can use it. The bit is currently unused by the virtio guest drivers and vhost. According to the spec "a good implementation will try to recover by issuing a reset". This is not attempted here because it requires auditing the virtio drivers to ensure there are no resource leaks or crashes if the device needs to be reset mid-operation. See "2.1 Device Status Field" in the VIRTIO 1.0 specification for details. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07MAINTAINERS: add entry for QEMUMichael S. Tsirkin
Gabriel merged support for QEMU FW CFG interface, but there's apparently no official maintainer. It's also possible that this will grow more interfaces in future. I'll happily co-maintain it and handle pull requests together with the rest of the PV stuff I maintain. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu>
2016-04-07firmware: qemu_fw_cfg.c: hold ACPI global lock during device accessGabriel Somlo
Allowing for the future possibility of implementing AML-based (i.e., firmware-triggered) access to the QEMU fw_cfg device, acquire the global ACPI lock when accessing the device on behalf of the guest-side sysfs driver, to prevent any potential race conditions. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07virtio: virtio 1.0 cs04 spec compliance for resetMichael S. Tsirkin
The spec says: after writing 0 to device_status, the driver MUST wait for a read of device_status to return 0 before reinitializing the device. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2016-04-07qemu_fw_cfg: don't leak kobj on init errorMichael S. Tsirkin
If platform_driver_register fails, we should cleanup fw_cfg_top_ko before exiting. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gabriel Somlo <somlo@cmu.edu>
2016-04-07USB: option: add "D-Link DWM-221 B1" device idBjørn Mork
Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <tschaefer@t-online.de> Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-07USB: serial: cp210x: Adding GE Healthcare Device IDMartyn Welch
The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-07USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devicesJosh Boyer
A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <thesource@mail.ru> CC: stable <stable@vger.kernel.org> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 00:55:49 +0000