summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-10-24mmc: sdhci: add UHS-II module and add a kernel configurationVictor Shih
This patch adds sdhci-uhs2.c as a module for UHS-II support. This is a skeleton for further development in this patch series. This kernel configuration, CONFIG_MMC_SDHCI_UHS2, will be used in the following commits to indicate UHS-II specific code in sdhci controllers. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Message-ID: <20241018105333.4569-4-victorshihgli@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-24mmc: sdhci: add UHS-II related definitions in headersVictor Shih
Add UHS-II related definitions in sdhci.h and sdhci-uhs2.h. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Message-ID: <20241018105333.4569-3-victorshihgli@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-24mmc: core: Support UHS-II card control and accessVictor Shih
Embed UHS-II access/control functionality into the MMC request processing flow. Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> Message-ID: <20241018105333.4569-2-victorshihgli@gmail.com> [Ulf: A couple of cleanups and fixed sd_uhs2_power_off()] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: mmc_spi: drop buggy snprintf()Bartosz Golaszewski
GCC 13 complains about the truncated output of snprintf(): drivers/mmc/host/mmc_spi.c: In function ‘mmc_spi_response_get’: drivers/mmc/host/mmc_spi.c:227:64: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=] 227 | snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s", | ^ drivers/mmc/host/mmc_spi.c:227:9: note: ‘snprintf’ output between 26 and 43 bytes into a destination of size 32 227 | snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 228 | cmd->opcode, maptype(cmd)); Drop it and fold the string it generates into the only place where it's emitted - the dev_dbg() call at the end of the function. Fixes: 15a0580ced08 ("mmc_spi host driver") Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20241008160134.69934-1-brgl@bgdev.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14dt-bindings: mmc: sdhci-msm: Document the X1E80100 SDHCI ControllerAbel Vesa
Document the SDHCI Controller on the X1E80100 Platform. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241008-x1e80100-qcp-sdhc-v1-1-dfef4c92ae31@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: davinci: use generic device_get_match_data()Bartosz Golaszewski
There's no reason for this driver to use the OF-specific variant so switch to using the generic device_get_match_data() helper instead. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20241007114918.52066-2-brgl@bgdev.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: davinci: order includes alphabeticallyBartosz Golaszewski
For better readability, put all header inclusions in alphabetical order. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20241007114918.52066-1-brgl@bgdev.pl Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: sdhci-of-arasan: Support for emmc hardware resetPaul Alvin
Add hw_reset callback to support emmc hardware reset, this callback get called from the mmc core only when "cap-mmc-hw-reset" property is defined in the DT. Signed-off-by: Paul Alvin <alvin.paulp@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20241007095445.19340-1-alvin.paulp@amd.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14dt-bindings: mmc: sdhci-msm: add IPQ5424 compatibleSricharan Ramabadhran
The IPQ5424 supports eMMC with an SDHCI controller. Add the appropriate compatible to the documentation. Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Link: https://lore.kernel.org/r/20241004102342.2414317-4-quic_srichara@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: mtk-sd: fix devm_clk_get_optional usageRosen Penev
This already returns NULL when not found. However, it can return EPROBE_DEFER and should thus return here. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://lore.kernel.org/r/20240930224919.355359-4-rosenp@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: mtd-sd: use devm_platform_ioremap_resourceRosen Penev
My guess is some automated tool missed this transformation. Now looks clearer as do what's happening. Also allows removal of struct resource. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://lore.kernel.org/r/20240930224919.355359-3-rosenp@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: mtk-sd: use devm_mmc_alloc_hostRosen Penev
Allows removing several gotos. Also fixed some wrong ones. Added dev_err_probe where EPROBE_DEFER is possible. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://lore.kernel.org/r/20240930224919.355359-2-rosenp@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14dt-bindings: mmc: cdns,sdhci: ref sdhci-common.yamlPierre-Henry Moussay
Since the Cadence sdhci controller is sdhci compatible, the cdns,sdhci.yaml should ref sdhci-common.yaml to use 'sdhci-caps-mask' property. Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com> Link: https://lore.kernel.org/r/20240930095449.1813195-17-pierre-henry.moussay@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14dt-bindings: mmc: cdns: document Microchip PIC64GX MMC/SDHCI controllerPierre-Henry Moussay
PIC64GX is compatible with cdns,sd4hc without any additional feature Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240930095449.1813195-12-pierre-henry.moussay@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: mtk-sd: Implement Host Software Queue for eMMC and SD CardAngeloGioacchino Del Regno
Add support for Host Software Queue (HSQ) and enable it when the controller instance does not have Command Queue Engine HW support. It was chosen to enable HSQ only for eMMC and SD/MicroSD cards and not for SDIO as performance improvements are seen only for the former. Performance was measured with a SanDisk Extreme Ultra A2 MicroSD card in a MediaTek MT8195T Acer Chromebook Spin 513 (CP513-2H), by running FIO (bs=4k) on an ArchLinux userspace. .... Summarizing .... Random read: +24.28% IOPS, +24.29% BW Sequential read: +3.14% IOPS, +3.49% BW Random RW (avg): +50.53% IOPS, +50.68% BW Below, more data from the benchmarks. Before: - Random read: IOPS=1643, BW=6574KiB/s bw ( KiB/s): min= 4578, max= 7440, per=99.95%, avg=6571.55, stdev=74.16, samples=953 iops : min= 1144, max= 1860, avg=1642.14, stdev=18.54, samples=953 lat (msec) : 100=0.01%, 250=0.12%, 500=0.38%, 750=97.89%, 1000=1.44%, 2000=0.16% - Sequential read: IOPS=19.1k, BW=74.4MiB/s bw ( KiB/s): min=12288, max=118483, per=100.00%, avg=76293.38, stdev=1971.42, samples=956 iops : min= 3072, max=29620, avg=19072.14, stdev=492.87, samples=956 lat (msec) : 4=0.01%, 10=0.01%, 20=0.21%, 50=23.95%, 100=75.67%, 250=0.05%, 500=0.03%, 750=0.08% - Random R/W: read: IOPS=282, BW=1129KiB/s (1156kB/s) write: IOPS=284, BW=1136KiB/s read bw ( KiB/s): min= 31, max= 3496, per=100.00%, avg=1703.67, stdev=155.42, samples=630 read iops : min= 7, max= 873, avg=425.22, stdev=38.85, samples=630 wri bw ( KiB/s): min= 31, max= 3443, per=100.00%, avg=1674.27, stdev=164.23, samples=644 wri iops : min= 7, max= 860, avg=417.87, stdev=41.03, samples=644 lat (msec) : 250=0.13%, 500=0.44%, 750=0.84%, 1000=22.29%, 2000=74.01%, >=2000=2.30% After: - Random read: IOPS=2042, BW=8171KiB/s bw ( KiB/s): min= 4907, max= 9072, per=99.94%, avg=8166.80, stdev=93.77, samples=954 iops : min= 1226, max= 2268, avg=2040.78, stdev=23.41, samples=954 lat (msec) : 100=0.03%, 250=0.13%, 500=52.88%, 750=46.64%, 1000=0.32% - Sequential read: IOPS=19.7k, BW=77.0MiB/s bw ( KiB/s): min=67980, max=94248, per=100.00%, avg=78894.27, stdev=1475.07, samples=956 iops : min=16994, max=23562, avg=19722.45, stdev=368.76, samples=956 lat (msec) : 4=0.01%, 10=0.01%, 20=0.05%, 50=28.78%, 100=71.14%, 250=0.01%, 500=0.02% - Random R/W: read: IOPS=424, BW=1699KiB/s write: IOPS=428, BW=1714KiB/s read bw ( KiB/s): min= 228, max= 2856, per=100.00%, avg=1796.60, stdev=112.59, samples=901 read iops : min= 54, max= 712, avg=447.81, stdev=28.21, samples=901 wri bw ( KiB/s): min= 28, max= 2904, per=100.00%, avg=1780.11, stdev=128.27, samples=916 wri iops : min= 4, max= 724, avg=443.69, stdev=32.14, samples=916 Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240930090156.33537-1-angelogioacchino.delregno@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: host: Fix typos in comments across various filesYu Jiaoliang
This patch corrects several typos in comments within the mmc/host directory. No functional changes are introduced, only comment improvements for better readability. Detected using codespell. Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240929093418.526901-1-yujiaoliang@vivo.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14memstick: Constify struct memstick_device_idChristophe JAILLET
'struct memstick_device_id' are not modified in these drivers. Constifying this structure moves some data to a read-only section, so increases overall security. Update memstick_dev_match(), memstick_bus_match() and struct memstick_driver accordingly. On a x86_64, with allmodconfig, as an example: Before: ====== text data bss dec hex filename 74055 3455 88 77598 12f1e drivers/memstick/core/ms_block.o After: ===== text data bss dec hex filename 74087 3423 88 77598 12f1e drivers/memstick/core/ms_block.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/6509d6f6ed64193f04e747a98ccea7492c976ca8.1727540434.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: sh_mmcif: correctly report success when obtaining DMA channelsWolfram Sang
The debug message could still report success when getting the channels was OK but configuring them failed. This actually caused a minor detour when debugging DMA problems, so make sure the success is only reported when the channels are really ready-to-use. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240928094454.3592-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: core: Factor out some of the code in mmc_go_idle()Victor Shih
Move some part out from mmc_go_idle() into a new function called __mmc_go_idle(), allowing it to be re-used, which is shown from a subsequent change. Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20240913102836.6144-7-victorshihgli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: core: Add definitions for SD UHS-II cardsVictor Shih
Add UHS-II specific data structures for commands and defines for registers, as described in Part 1 UHS-II Addendum Version 1.01. UHS-II related definitions are listed below: 1. UHS-II card capability: sd_uhs2_caps{} 2. UHS-II configuration: sd_uhs2_config{} 3. UHS-II register I/O address and register field definitions: sd_uhs2.h Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20240913102836.6144-6-victorshihgli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: core: Extend support for mmc regulators with a vqmmc2Ulf Hansson
To allow an additional external regulator to be controlled by an mmc host driver, let's add support for a vqmmc2 regulator to the mmc core. For an SD UHS-II interface the vqmmc2 regulator may correspond to the so called vdd2 supply, as described by the SD spec. Initially, only 1.8V is needed, hence limit the new helper function, mmc_regulator_set_vqmmc2() to this too. Note that, to allow for flexibility mmc host drivers need to manage the enable/disable of the vqmmc2 regulator themselves, while the regulator is looked up through the common mmc_regulator_get_supply(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240913102836.6144-5-victorshihgli@gmail.com
2024-10-14mmc: core: Announce successful insertion of an SD UHS-II cardUlf Hansson
To inform the users about SD UHS-II cards, let's extend the print at card insertion with a "UHS-II" substring. Within this change, it seems reasonable to convert from using "ultra high speed" into "UHS-I speed", for the UHS-I type, as it should makes it more clear. Note that, the new print for UHS-II cards doesn't include the actual selected speed mode. Instead, this is going to be added from subsequent change. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240913102836.6144-4-victorshihgli@gmail.com
2024-10-14mmc: core: Prepare to support SD UHS-II cardsUlf Hansson
The SD UHS-II interface was introduced to the SD spec v4.00 several years ago. The interface is fundamentally different from an electrical and a protocol point of view, comparing to the legacy SD interface. However, the legacy SD protocol is supported through a specific transport layer (SD-TRAN) defined in the UHS-II addendum of the spec. This allows the SD card to be managed in a very similar way as a legacy SD card, hence a lot of code can be re-used to support these new types of cards through the mmc subsystem. Moreover, an SD card that supports the UHS-II interface shall also be backwards compatible with the legacy SD interface, which allows a UHS-II card to be inserted into a legacy slot. As a matter of fact, this is already supported by mmc subsystem as of today. To prepare to add support for UHS-II, this change puts the basic foundation in the mmc core in place, allowing it to be more easily reviewed before subsequent changes implements the actual support. Basically, the approach here adds a new UHS-II bus_ops type and adds a separate initialization path for the UHS-II card. The intent is to avoid us from sprinkling the legacy initialization path, but also to simplify implementation of the UHS-II specific bits. At this point, there is only one new host ops added to manage the various ios settings needed for UHS-II. Additional host ops that are needed, are being added from subsequent changes. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240913102836.6144-3-victorshihgli@gmail.com
2024-10-14mmc: core: Cleanup printing of speed mode at card insertionUlf Hansson
The current print of the bus speed mode in mmc_add_card() has grown over the years and is now difficult to parse. Let's clean up the code and also take the opportunity to properly announce "DDR" for eMMCs as "high speed DDR", which is according to the eMMC spec. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240913102836.6144-2-victorshihgli@gmail.com
2024-10-14mmc: core: Enable SDUCAvri Altman
Enable SDUC if the card responded to ACMD41 with HCS & HO2T bits set. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241006051148.160278-11-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: core: Prevent HSQ from enabling for SDUCAvri Altman
hsq allows to get more in-flight requests from mmc core, which can be prepared in advance and be issued asynchronously to the completion of the preceding request (in atomic context). This is presumably broken though by the mandatory CMD22 for SDUC. We plan to make it work, but only as an improvement on top of the initial support for SDUC. Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241006051148.160278-10-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: core: Disable SDUC for mmc_testAvri Altman
Planning to ameliorate it in the very near future. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241006051148.160278-9-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: core: Adjust ACMD22 to SDUCAvri Altman
ACMD22 is used to verify the previously write operation. Normally, it returns the number of written sectors as u32. SDUC, however, returns it as u64. This is not a superfluous requirement, because SDUC writes may exceeds 2TB. For Linux mmc however, the previously write operation could not be more than the block layer limits, thus we make room for a u64 and cast the returning value to u32. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241006051148.160278-8-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [Stephen Rothwell: Fix build error when moving to new rc from Linus's tree] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2024-10-14mmc: core: Add Ext memory addressing for eraseAvri Altman
CMD22 shall precede CMD32 and CMD33 to configure 38-bit erase start address and 38 bit erase stop address. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241006051148.160278-7-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: core: Allow mmc erase to carry large addressesAvri Altman
Preparing for SDUC, Allow the erase address to be larger beyond a 32 bit address. Tested-by: Ricky WU <ricky_wu@realtek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241006051148.160278-6-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: core: Add open-ended Ext memory addressingAvri Altman
For open-ended read/write - just send CMD22 before issuing the command. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241006051148.160278-5-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: core: Don't use close-ended rw for SDUCAvri Altman
The SDUC spec expects CMD22 to get squeezed between CMD23 and the read/write command, e.g. CMD23->CMD22->CMD18 and CMD23->CMD22->CMD25. At this early stage of adoption, we want to avoid an amid stream of fixes & quirks of bogus hw, that tends to apply extra logic specifically around auto-cmd12 & auto-cmd23. Let's leave close-ended out for now, and re-consider this should those cards become ubiquitous, if any. It also means that BLK_FEAT_FUA will not be used for I/O, but instead we will rely on BLK_FEAT_WRITE_CACHE. Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241006051148.160278-4-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: sd: Add Extension memory addressingAvri Altman
SDUC memory addressing spans beyond 2TB and up to 128TB. Therefore, 38 bits are required to access the entire memory space of all sectors. Those extra 6 bits are to be carried by CMD22 prior of sending read/write/erase commands: CMD17, CMD18, CMD24, CMD25, CMD32, and CMD33. CMD22 will carry the higher order 6 bits, and must precedes any of the above commands even if it targets sector < 2TB. No error related to address or length is indicated in CMD22 but rather in the read/write command itself. Tested-by: Ricky WU <ricky_wu@realtek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241006051148.160278-3-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: sd: SDUC Support RecognitionAvri Altman
Ultra Capacity SD cards (SDUC) was already introduced in SD7.0. Those cards support capacity larger than 2TB and up to including 128TB. ACMD41 was extended to support the host-card handshake during initialization. The card expects that the HCS & HO2T bits to be set in the command argument, and sets the applicable bits in the R3 returned response. On the contrary, if a SDUC card is inserted to a non-supporting host, it will never respond to this ACMD41 until eventually, the host will timed out and give up. Also, add SD CSD version 3.0 - designated for SDUC, and properly parse the csd register as the c_size field got expanded to 28 bits. Do not enable SDUC for now - leave it to the last patch in the series. Tested-by: Ricky WU <ricky_wu@realtek.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241006051148.160278-2-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/mmc to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240927145832.754697-2-u.kleine-koenig@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: sdhci-esdhc-imx: enable quirks SDHCI_QUIRK_NO_LEDPeng Fan
Enable SDHCI_QUIRK_NO_LED for i.MX7ULP, i.MX8MM, i.MX8QXP and i.MXRT1050. Even there is LCTL register bit, there is no IOMUX PAD for it. So there is no sense to enable LED for SDHCI for these SoCs. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240923062016.1165868-1-peng.fan@oss.nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14memstick: Fix typo in commentYu Jiaoliang
Fix typos: exectly->exactly, cylynders->cylinders, intersting->interesting, inteface->interface. Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com> Link: https://lore.kernel.org/r/20240918081640.1493847-1-yujiaoliang@vivo.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switchJudith Mendez
The sdhci_start_signal_voltage_switch function sets V1P8_SIGNAL_ENA by default after switching to 1v8 signaling. V1P8_SIGNAL_ENA determines whether to launch cmd/data on neg edge or pos edge of clock. Due to some eMMC and SD failures seen across am62x platform, do not set V1P8_SIGNAL_ENA by default, only enable the bit for devices that require this bit in order to switch to 1v8 voltage for uhs modes. Signed-off-by: Judith Mendez <jm@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240913185403.1339115-1-jm@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-14mmc: core: Add SD card quirk for broken poweroff notificationKeita Aihara
GIGASTONE Gaming Plus microSD cards manufactured on 02/2022 report that they support poweroff notification and cache, but they are not working correctly. Flush Cache bit never gets cleared in sd_flush_cache() and Poweroff Notification Ready bit also never gets set to 1 within 1 second from the end of busy of CMD49 in sd_poweroff_notify(). This leads to I/O error and runtime PM error state. I observed that the same card manufactured on 01/2024 works as expected. This problem seems similar to the Kingston cards fixed with commit c467c8f08185 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019") and should be handled using quirks. CID for the problematic card is here. 12345641535443002000000145016200 Manufacturer ID is 0x12 and defined as CID_MANFID_GIGASTONE as of now, but would like comments on what naming is appropriate because MID list is not public and not sure it's right. Signed-off-by: Keita Aihara <keita.aihara@sony.com> Link: https://lore.kernel.org/r/20240913094417.GA4191647@sony.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-13Linux 6.12-rc3v6.12-rc3Linus Torvalds
2024-10-13Merge tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: "Two fixes for Windows symlink handling" * tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix creating native symlinks pointing to current or parent directory cifs: Improve creating native symlinks pointing to directory
2024-10-13Merge tag 'usb-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for some reported problems for 6.12-rc3. Include in here is: - fix for yurex driver that was caused in -rc1 - build error fix for usbg network filesystem code - onboard_usb_dev build fix - dwc3 driver fixes for reported errors - gadget driver fix - new USB storage driver quirk - xhci resume bugfix All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: net/9p/usbg: Fix build error USB: yurex: kill needless initialization in yurex_read Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant" usb: xhci: Fix problem with xhci resume from suspend usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support usb: dwc3: core: Stop processing of pending events if controller is halted usb: dwc3: re-enable runtime PM after failed resume usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip usb: gadget: core: force synchronous registration
2024-10-13Merge tag 'driver-core-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here is a single driver core fix, and a .mailmap update. The fix is for the rust driver core bindings, turned out that the from_raw binding wasn't a good idea (don't want to pass a pointer to a reference counted object without actually incrementing the pointer.) So this change fixes it up as the from_raw binding came in in -rc1. The other change is a .mailmap update. Both have been in linux-next for a while with no reported issues" * tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: mailmap: update mail for Fiona Behrens rust: device: change the from_raw() function
2024-10-12Merge tag 'powerpc-6.12-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: - Fix crash in memcpy on 8xx due to dcbz workaround since recent changes Thanks to Christophe Leroy. * tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/8xx: Fix kernel DTLB miss on dcbz
2024-10-12Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four small fixes, three in drivers and one in the FC transport class to add idempotence to state setting" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_transport_fc: Allow setting rport state to current state scsi: wd33c93: Don't use stale scsi_pointer value scsi: fnic: Move flush_work initialization out of if block scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()
2024-10-12Merge tag 'hwmon-for-v6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Add missing dependencies on REGMAP_I2C for several drivers - Fix memory leak in adt7475 driver - Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon driver to match other sensor labels * tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max1668) Add missing dependency on REGMAP_I2C hwmon: (ltc2991) Add missing dependency on REGMAP_I2C hwmon: (adt7470) Add missing dependency on REGMAP_I2C hwmon: (adm9240) Add missing dependency on REGMAP_I2C hwmon: (mc34vr500) Add missing dependency on REGMAP_I2C hwmon: (tmp513) Add missing dependency on REGMAP_I2C hwmon: (adt7475) Fix memory leak in adt7475_fan_pwm_config() hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature
2024-10-11Merge tag 'linux_kselftest-fixes-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Fixes for build, run-time errors, and reporting errors: - ftrace: regression test for a kernel crash when running function graph tracing and then enabling function profiler. - rseq: fix for mm_cid test failure. - vDSO: - fixes to reporting skip and other error conditions - changes unconditionally build chacha and getrandom tests on all architectures to make it easier for them to run in CIs - build error when sched.h to bring in CLONE_NEWTIME define" * tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: ftrace/selftest: Test combination of function_graph tracer and function profiler selftests/rseq: Fix mm_cid test failure selftests: vDSO: Explicitly include sched.h selftests: vDSO: improve getrandom and chacha error messages selftests: vDSO: unconditionally build getrandom test selftests: vDSO: unconditionally build chacha test
2024-10-11Merge tag 'devicetree-fixes-for-6.12-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Disable kunit tests for arm64+ACPI - Fix refcount issue in kunit tests - Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq - Drop type ref on 'msi-parent in fsl,qoriq-mc binding - Move elgin,jg10309-01 to its own binding from trivial-devices * tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Skip kunit tests when arm64+ACPI doesn't populate root node of: Fix unbalanced of node refcount and memory leaks dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent dt-bindings: display: elgin,jg10309-01: Add own binding
2024-10-11Merge tag 'fbdev-for-6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev platform driver fix from Helge Deller: "Switch fbdev drivers back to struct platform_driver::remove() Now that 'remove()' has been converted to the sane new API, there's no reason for the 'remove_new()' use, so this converts back to the traditional and simpler name. See commits 5c5a7680e67b ("platform: Provide a remove callback that returns no value") 0edb555a65d1 ("platform: Make platform_driver::remove() return void") for background to this all" * tag 'fbdev-for-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: Switch back to struct platform_driver::remove()
2024-10-11Merge tag 'gpio-fixes-for-v6.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix clock handle leak in probe() error path in gpio-aspeed - add a dummy register read to ensure the write actually completed * tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: aspeed: Use devm_clk api to manage clock source gpio: aspeed: Add the flush write to ensure the write complete.
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 16:00:16 +0000