| Age | Commit message (Collapse) | Author |
|---|
|
This patch addresses a macvlan leak issue in the i40e driver caused by
concurrent access to vsi->mac_filter_hash. The leak occurs when multiple
threads attempt to modify the mac_filter_hash simultaneously, leading to
inconsistent state and potential memory leaks.
To fix this, we now wrap the calls to i40e_del_mac_filter() and zeroing
vf->default_lan_addr.addr with spin_lock/unlock_bh(&vsi->mac_filter_hash_lock),
ensuring atomic operations and preventing concurrent access.
Additionally, we add lockdep_assert_held(&vsi->mac_filter_hash_lock) in
i40e_add_mac_filter() to help catch similar issues in the future.
Reproduction steps:
1. Spawn VFs and configure port vlan on them.
2. Trigger concurrent macvlan operations (e.g., adding and deleting
portvlan and/or mac filters).
3. Observe the potential memory leak and inconsistent state in the
mac_filter_hash.
This synchronization ensures the integrity of the mac_filter_hash and prevents
the described leak.
Fixes: fed0d9f13266 ("i40e: Fix VF's MAC Address change on VM")
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Improve the error and skip condition messages to let the developer know
precisely where a test has failed. Also make better use of the ksft api
for this.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rather than building on supported archs, build on all archs, and then
use the presence of the symbol in the vDSO to either skip the test or
move forward with it.
Note that this means that this test no longer checks whether the symbol
was correctly added to the kernel. But hopefully this will be clear
enough to developers and we'll cross our fingers that symbols aren't
removed by accident and not caught after this change.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rather than using symlinks to find the vgetrandom-chacha.S file for each
arch, store this in a file that uses the compiler to determine
architecture, and then make use of weak symbols to skip the test on
architectures that don't provide the code.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Increasing MSI-X value on a VF leads to invalid memory operations. This
is caused by not reallocating some arrays.
Reproducer:
modprobe ice
echo 0 > /sys/bus/pci/devices/$PF_PCI/sriov_drivers_autoprobe
echo 1 > /sys/bus/pci/devices/$PF_PCI/sriov_numvfs
echo 17 > /sys/bus/pci/devices/$VF0_PCI/sriov_vf_msix_count
Default MSI-X is 16, so 17 and above triggers this issue.
KASAN reports:
BUG: KASAN: slab-out-of-bounds in ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
Read of size 8 at addr ffff8888b937d180 by task bash/28433
(...)
Call Trace:
(...)
? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
kasan_report+0xed/0x120
? ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
ice_vsi_alloc_ring_stats+0x38d/0x4b0 [ice]
ice_vsi_cfg_def+0x3360/0x4770 [ice]
? mutex_unlock+0x83/0xd0
? __pfx_ice_vsi_cfg_def+0x10/0x10 [ice]
? __pfx_ice_remove_vsi_lkup_fltr+0x10/0x10 [ice]
ice_vsi_cfg+0x7f/0x3b0 [ice]
ice_vf_reconfig_vsi+0x114/0x210 [ice]
ice_sriov_set_msix_vec_count+0x3d0/0x960 [ice]
sriov_vf_msix_count_store+0x21c/0x300
(...)
Allocated by task 28201:
(...)
ice_vsi_cfg_def+0x1c8e/0x4770 [ice]
ice_vsi_cfg+0x7f/0x3b0 [ice]
ice_vsi_setup+0x179/0xa30 [ice]
ice_sriov_configure+0xcaa/0x1520 [ice]
sriov_numvfs_store+0x212/0x390
(...)
To fix it, use ice_vsi_rebuild() instead of ice_vf_reconfig_vsi(). This
causes the required arrays to be reallocated taking the new queue count
into account (ice_vsi_realloc_stat_arrays()). Set req_txq and req_rxq
before ice_vsi_rebuild(), so that realloc uses the newly set queue
count.
Additionally, ice_vsi_rebuild() does not remove VSI filters
(ice_fltr_remove_all()), so ice_vf_init_host_cfg() is no longer
necessary.
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 2a2cb4c6c181 ("ice: replace ice_vf_recreate_vsi() with ice_vf_reconfig_vsi()")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Triggering the reset while in switchdev mode causes
errors[1]. Rules are already removed by this time
because switch content is flushed in case of the reset.
This means that rules were deleted from HW but SW
still thinks they exist so when we get
SWITCHDEV_FDB_DEL_TO_DEVICE notification we try to
delete not existing rule.
We can avoid these errors by clearing the rules
early in the reset flow before they are removed from HW.
Switchdev API will get notified that the rule was removed
so we won't get SWITCHDEV_FDB_DEL_TO_DEVICE notification.
Remove unnecessary ice_clear_sw_switch_recipes.
[1]
ice 0000:01:00.0: Failed to delete FDB forward rule, err: -2
ice 0000:01:00.0: Failed to delete FDB guard rule, err: -2
Fixes: 7c945a1a8e5f ("ice: Switchdev FDB events support")
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
netif_is_ice() works by checking the pointer to netdev ops. However, it
only checks for the default ice_netdev_ops, not ice_netdev_safe_mode_ops,
so in Safe Mode it always returns false, which is unintuitive. While it
doesn't look like netif_is_ice() is currently being called anywhere in Safe
Mode, this could change and potentially lead to unexpected behaviour.
Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If DDP package is missing or corrupted, the driver should enter Safe Mode.
Instead, an error is returned and probe fails.
To fix this, don't exit init if ice_init_ddp_config() returns an error.
Repro:
* Remove or rename DDP package (/lib/firmware/intel/ice/ddp/ice.pkg)
* Load ice
Fixes: cc5776fe1832 ("ice: Enable switching default Tx scheduler topology")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- ops.enqueue() didn't have a way to tell whether select_task_rq_scx()
and thus ops.select() were skipped. Some schedulers were incorrectly
using SCX_ENQ_WAKEUP. Add SCX_ENQ_CPU_SELECTED and fix scx_qmap using
it.
- Remove a spurious WARN_ON_ONCE() in scx_cgroup_exit()
- Fix error information clobbering during load
- Add missing __weak markers to BPF helper declarations
- Doc update
* tag 'sched_ext-for-6.12-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Documentation: Update instructions for running example schedulers
sched_ext, scx_qmap: Add and use SCX_ENQ_CPU_SELECTED
sched/core: Add ENQUEUE_RQ_SELECTED to indicate whether ->select_task_rq() was called
sched/core: Make select_task_rq() take the pointer to wake_flags instead of value
sched_ext: scx_cgroup_exit() may be called without successful scx_cgroup_init()
sched_ext: Improve error reporting during loading
sched_ext: Add __weak markers to BPF helper function decalarations
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/video/fbdev to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
While touching these files, make indention of the struct initializer
consistent in several files.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Similar to the MSR RAPL interface, MMIO RAPL supports PL4 too, so add
MMIO RAPL PL4d support to the processor_thermal driver.
As a result, the powercap sysfs for MMIO RAPL will show a new "peak
power" constraint.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240930081801.28502-7-rui.zhang@intel.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CPU0/package0 is always online and the MMIO RAPL driver runs on single
package systems only, so there is no need to handle CPU hotplug in it.
Always register a RAPL package device for package 0 and remove the
unnecessary CPU hotplug support.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240930081801.28502-6-rui.zhang@intel.com
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add PL4 support for ArrowLake-U platform.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240930081801.28502-5-rui.zhang@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The hardware definition of every TPMI feature contains a major and minor
version. When there is a change in the MMIO offset or change in the
definition of a field, hardware will change major version. For addition
of new fields without modifying existing MMIO offsets or fields, only
the minor version is changed.
If the driver has not been updated to recognize a new hardware major
version, it cannot provide the RAPL interface to users due to possible
register layout incompatibilities. However, the driver does not need to
be updated every time the hardware minor version changes because in that
case it will just miss some new functionality exposed by the hardware.
The current implementation causes the driver to refuse to work for any
hardware version change which is unnecessarily restrictive.
If there is a minor version mismatch, log an information message and
continue, but if there is a major version mismatch, log a warning and
exit (as before).
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20240930081801.28502-4-rui.zhang@intel.com
Fixes: 9eef7f9da928 ("powercap: intel_rapl: Introduce RAPL TPMI interface driver")
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since the artifact paths for tools changed, we need to update the documentation to reflect that path.
Signed-off-by: Devaansh-Kumar <devaanshk840@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"New:
- implement fallocate for compressed files
- add support for the compression attribute
- optimize large writes to sparse files
Fixes:
- fix several potential deadlock scenarios
- fix various internal bugs detected by syzbot
- add checks before accessing NTFS structures during parsing
- correct the format of output messages
Refactoring:
- replace fsparam_flag_no with fsparam_flag in options parser
- remove unused functions and macros"
* tag 'ntfs3_for_6.12' of https://github.com/Paragon-Software-Group/linux-ntfs3: (25 commits)
fs/ntfs3: Format output messages like others fs in kernel
fs/ntfs3: Additional check in ntfs_file_release
fs/ntfs3: Fix general protection fault in run_is_mapped_full
fs/ntfs3: Sequential field availability check in mi_enum_attr()
fs/ntfs3: Additional check in ni_clear()
fs/ntfs3: Fix possible deadlock in mi_read
ntfs3: Change to non-blocking allocation in ntfs_d_hash
fs/ntfs3: Remove unused al_delete_le
fs/ntfs3: Rename ntfs3_setattr into ntfs_setattr
fs/ntfs3: Replace fsparam_flag_no -> fsparam_flag
fs/ntfs3: Add support for the compression attribute
fs/ntfs3: Implement fallocate for compressed files
fs/ntfs3: Make checks in run_unpack more clear
fs/ntfs3: Add rough attr alloc_size check
fs/ntfs3: Stale inode instead of bad
fs/ntfs3: Refactor enum_rstbl to suppress static checker
fs/ntfs3: Fix sparse warning in ni_fiemap
fs/ntfs3: Fix warning possible deadlock in ntfs_set_state
fs/ntfs3: Fix sparse warning for bigendian
fs/ntfs3: Separete common code for file_read/write iter/splice
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix an assert() to handle captured and unprocessed ARM CoreSight CPU
traces
- Fix static build compilation error when libdw isn't installed or is
too old
- Add missing include when building with
!HAVE_DWARF_GETLOCATIONS_SUPPORT
- Add missing refcount put on 32-bit DSOs
- Fix disassembly of user space binaries by setting the binary_type of
DSO when loading
- Update headers with the kernel sources, including asound.h, sched.h,
fcntl, msr-index.h, irq_vectors.h, socket.h, list_sort.c and arm64's
cputype.h
* tag 'perf-tools-fixes-for-v6.12-1-2024-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf cs-etm: Fix the assert() to handle captured and unprocessed cpu trace
perf build: Fix build feature-dwarf_getlocations fail for old libdw
perf build: Fix static compilation error when libdw is not installed
perf dwarf-aux: Fix build with !HAVE_DWARF_GETLOCATIONS_SUPPORT
tools headers arm64: Sync arm64's cputype.h with the kernel sources
perf tools: Cope with differences for lib/list_sort.c copy from the kernel
tools check_headers.sh: Add check variant that excludes some hunks
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync the linux/in.h with the kernel sources
perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools include UAPI: Sync linux/fcntl.h copy with the kernel sources
tools include UAPI: Sync linux/sched.h copy with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf vdso: Missed put on 32-bit dsos
perf symbol: Set binary_type of dso when loading
|
|
Starting with 6.12 commit 85585b4bc8d8 ("selftests: add ncdevmem, netcat
for devmem TCP") kselftest-all creates additional outputs that
kselftest-clean does not cleanup:
$ make defconfig
$ make kselftest-all
$ make kselftest-clean
$ git clean -ndxf | grep tools/net
Would remove tools/net/ynl/lib/__pycache__/
Would remove tools/net/ynl/lib/ynl.a
Would remove tools/net/ynl/lib/ynl.d
Would remove tools/net/ynl/lib/ynl.o
Make kselftest-clean remove the newly added net/ynl outputs.
Fixes: 85585b4bc8d8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20241005215600.852260-1-gthelen@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Javier Carrasco says:
====================
selftests: net: add missing gitignore and EXTRA_CLEAN entries.
This series is a cherry-pick on top of v6.12-rc1 from the one I sent
for selftests with other patches that were not net-related:
https://lore.kernel.org/all/20240925-selftests-gitignore-v3-0-9db896474170@gmail.com/
The patches have not been modified, and the Reviewed-by tags have
been kept.
v1: https://lore.kernel.org/20240930-net-selftests-gitignore-v1-0-65225a855946@gmail.com
====================
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-0-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The generated include.sh should be ignored by git. Create a new
gitignore and add the file to the list.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-3-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The include.sh file is generated when building the net/rds selftests,
but there is no rule to delete it with the clean target. Add the file to
EXTRA_CLEAN in order to remove it when required.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-2-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This executable is missing from the corresponding gitignore file.
Add msg_oob to the net gitignore list.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-1-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent topology checks of the x86 boot code uncovered the need for
PV guests to have the boot cpu marked in the APICBASE MSR.
Fixes: 9d22c96316ac ("x86/topology: Handle bogus ACPI tables correctly")
Reported-by: Niels Dettenbach <nd@syndicat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Make sure to always set the GEM function pointer even for in kernel
allocations. This fixes a NULL pointer deref caused by switching to GEM
references.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: fd69ef05029f ("drm/radeon: use GEM references instead of TTMs")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 01b64bc063d014641631867a7e0edd8ac55282d4)
|
|
Replace of_clk_get with devm_clk_get_enabled to manage the clock source.
Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support")
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20241008081450.1490955-3-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Performing a dummy read ensures that the register write operation is fully
completed, mitigating any potential bus delays that could otherwise impact
the frequency of bitbang usage. E.g., if the JTAG application uses GPIO to
control the JTAG pins (TCK, TMS, TDI, TDO, and TRST), and the application
sets the TCK clock to 1 MHz, the GPIO's high/low transitions will rely on
a delay function to ensure the clock frequency does not exceed 1 MHz.
However, this can lead to rapid toggling of the GPIO because the write
operation is POSTed and does not wait for a bus acknowledgment.
Fixes: 361b79119a4b ("gpio: Add Aspeed driver")
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20241008081450.1490955-2-billy_tsai@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The `nouveau_dmem_copy_one` function ensures that the copy push command is
sent to the device firmware but does not track whether it was executed
successfully.
In the case of a copy error (e.g., firmware or hardware failure), the
copy push command will be sent via the firmware channel, and
`nouveau_dmem_copy_one` will likely report success, leading to the
`migrate_to_ram` function returning a dirty HIGH_USER page to the user.
This can result in a security vulnerability, as a HIGH_USER page that may
contain sensitive or corrupted data could be returned to the user.
To prevent this vulnerability, we allocate a zero page. Thus, in case of
an error, a non-dirty (zero) page will be returned to the user.
Fixes: 5be73b690875 ("drm/nouveau/dmem: device memory helpers for SVM")
Signed-off-by: Yonatan Maman <Ymaman@Nvidia.com>
Co-developed-by: Gal Shalom <GalShalom@Nvidia.com>
Signed-off-by: Gal Shalom <GalShalom@Nvidia.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008115943.990286-3-ymaman@nvidia.com
|
|
When `nouveau_dmem_copy_one` is called, the following error occurs:
[272146.675156] nouveau 0000:06:00.0: fifo: PBDMA9: 00000004 [HCE_PRIV]
ch 1 00000300 00003386
This indicates that a copy push command triggered a Host Copy Engine
Privileged error on channel 1 (Copy Engine channel). To address this
issue, modify the Copy Engine channel to allow privileged push commands
Fixes: 6de125383a5c ("drm/nouveau/fifo: expose runlist topology info on all chipsets")
Signed-off-by: Yonatan Maman <Ymaman@Nvidia.com>
Co-developed-by: Gal Shalom <GalShalom@Nvidia.com>
Signed-off-by: Gal Shalom <GalShalom@Nvidia.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008115943.990286-2-ymaman@nvidia.com
|
|
Jonas Gorski says:
====================
net: dsa: b53: assorted jumbo frame fixes
While investigating the capabilities of BCM63XX's integrated switch and
its DMA engine, I noticed a few issues in b53's jumbo frame code.
Mostly a confusion of MTU vs frame length, but also a few missing cases
for 100M switches.
Tested on BCM63XX and BCM53115 with intel 1G and realtek 1G NICs,
which support MTUs of 9000 or slightly above, but significantly less
than the 9716/9720 supported by BCM53115, so I couldn't verify the
actual maximum frame length.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
====================
Link: https://patch.msgid.link/20241004-b53_jumbo_fixes-v1-0-ce1e54aa7b3c@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
All modern chips support and need the 10_100 bit set for supporting jumbo
frames on 10/100 ports, so instead of enabling it only for 583XX enable
it for everything except bcm63xx, where the bit is writeable, but does
nothing.
Tested on BCM53115, where jumbo frames were dropped at 10/100 speeds
without the bit set.
Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While BCM5325/5365 do not support jumbo frames, they do support slightly
oversized frames, so do not error out if requesting a supported MTU for
them.
Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
BCM5325/BCM5365 do not support jumbo frames, so we should not report a
jumbo frame mtu for them. But they do support so called "oversized"
frames up to 1536 bytes long by default, so report an appropriate MTU.
Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
JMS_MAX_SIZE is the ethernet frame length, not the MTU, which is payload
without ethernet headers.
According to the datasheets maximum supported frame length for most
gigabyte swithes is 9720 bytes, so convert that to the expected MTU when
using VLAN tagged frames.
Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
JMS_MIN_SIZE is the full ethernet frame length, while mtu is just the
data payload size. Comparing these two meant that mtus between 1500 and
1518 did not trigger enabling jumbo frames.
So instead compare the set mtu ETH_DATA_LEN, which is equal to
JMS_MIN_SIZE - ETH_HLEN - ETH_FCS_LEN;
Also do a check that the requested mtu is actually greater than the
minimum length, else we do not need to enable jumbo frames.
In practice this only introduced a very small range of mtus that did not
work properly. Newer chips allow 2000 byte large frames by default, and
older chips allow 1536 bytes long, which is equivalent to an mtu of
1514. So effectivly only mtus of 1515~1517 were broken.
Fixes: 6ae5834b983a ("net: dsa: b53: add MTU configuration support")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Nicolas Pitre says:
====================
fix ti-am65-cpsw-nuss module removal
Fix issues preventing rmmod of ti-am65-cpsw-nuss from working properly.
v3:
- more patch submission minutiae
v2: https://lore.kernel.org/netdev/20241003172105.2712027-2-nico@fluxnic.net/T/
- conform to netdev patch submission customs
- address patch review trivias
v1: https://lore.kernel.org/netdev/20240927025301.1312590-2-nico@fluxnic.net/T/
====================
Link: https://patch.msgid.link/20241004041218.2809774-1-nico@fluxnic.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Usage of devm_alloc_etherdev_mqs() conflicts with
am65_cpsw_nuss_cleanup_ndev() as the same struct net_device instances
get unregistered twice. Switch to alloc_etherdev_mqs() and make sure
am65_cpsw_nuss_cleanup_ndev() unregisters and frees those net_device
instances properly.
With this, it is finally possible to rmmod the driver without oopsing
the kernel.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Roger Quadros <roger@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In am65_cpsw_nuss_remove(), move the call to am65_cpsw_unregister_devlink()
after am65_cpsw_nuss_cleanup_ndev() to avoid triggering the
WARN_ON(devlink_port->type != DEVLINK_PORT_TYPE_NOTSET) in
devl_port_unregister(). Makes it coherent with usage in
m65_cpsw_nuss_register_ndevs()'s cleanup path.
Fixes: 58356eb31d60 ("net: ti: am65-cpsw-nuss: Add devlink support")
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move the tx cpu dma ring index update out of transmit loop of
airoha_dev_xmit routine in order to not start transmitting the packet
before it is fully DMA mapped (e.g. fragmented skbs).
Fixes: 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Reported-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241004-airoha-eth-7581-mapping-fix-v1-1-8e4279ab1812@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct
ordering") correctly fixed a problem with using devm_ but missed
removing the LED entry from the LEDs list.
This cause kernel panic on specific scenario where the port for the PHY
is torn down and up and the kmod for the PHY is removed.
On setting the port down the first time, the assosiacted LEDs are
correctly unregistered. The associated kmod for the PHY is now removed.
The kmod is now added again and the port is now put up, the associated LED
are registered again.
On putting the port down again for the second time after these step, the
LED list now have 4 elements. With the first 2 already unregistered
previously and the 2 new one registered again.
This cause a kernel panic as the first 2 element should have been
removed.
Fix this by correctly removing the element when LED is unregistered.
Reported-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Cc: stable@vger.kernel.org
Fixes: c938ab4da0eb ("net: phy: Manual remove LEDs to ensure correct ordering")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241004182759.14032-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- RFCOMM: FIX possible deadlock in rfcomm_sk_state_change
- hci_conn: Fix UAF in hci_enhanced_setup_sync
- btusb: Don't fail external suspend requests
* tag 'for-net-2024-10-04' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btusb: Don't fail external suspend requests
Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync
Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_change
====================
Link: https://patch.msgid.link/20241004210124.4010321-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
adin1110_read_fifo()
If 'frame_size' is too small or if 'round_len' is an error code, it is
likely that an error code should be returned to the caller.
Actually, 'ret' is likely to be 0, so if one of these sanity checks fails,
'success' is returned.
Return -EINVAL instead.
Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/8ff73b40f50d8fa994a454911b66adebce8da266.1727981562.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit b514c47ebf41a6536551ed28a05758036e6eca7c.
The commit describes that we don't have to sync the page when
recycling, and it tries to optimize that case. But we do need
to sync after allocation. Recycling side should be changed to
pass the right sync size instead.
Fixes: b514c47ebf41 ("net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/20241004070846.2502e9ea@kernel.org
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20241004142115.910876-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Accessing device registers seems to be not reliable, the chip
revision is sometimes detected wrongly (0 instead of expected 1).
Ensure that the chip reset is performed via reset GPIO and then
wait for 'Device Ready' status in HW_CFG register before doing
any register initializations.
Cc: stable@vger.kernel.org
Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Anatolij Gustschin <agust@denx.de>
[alex: reworked using read_poll_timeout()]
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20241004113655.3436296-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have recently noticed the exact same KASAN splat as in commit
6cd4a78d962b ("net: do not leave a dangling sk pointer, when socket
creation fails"). The problem is that commit did not fully address the
problem, as some pf->create implementations do not use sk_common_release
in their error paths.
For example, we can use the same reproducer as in the above commit, but
changing ping to arping. arping uses AF_PACKET socket and if packet_create
fails, it will just sk_free the allocated sk object.
While we could chase all the pf->create implementations and make sure they
NULL the freed sk object on error from the socket, we can't guarantee
future protocols will not make the same mistake.
So it is easier to just explicitly NULL the sk pointer upon return from
pf->create in __sock_create. We do know that pf->create always releases the
allocated sk object on error, so if the pointer is not NULL, it is
definitely dangling.
Fixes: 6cd4a78d962b ("net: do not leave a dangling sk pointer, when socket creation fails")
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241003170151.69445-1-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When adding a delayed ref head, at delayed-ref.c:add_delayed_ref_head(),
if we fail to insert the qgroup record we don't error out, we ignore it.
In fact we treat it as if there was no error and there was already an
existing record - we don't distinguish between the cases where
btrfs_qgroup_trace_extent_nolock() returns 1, meaning a record already
existed and we can free the given record, and the case where it returns
a negative error value, meaning the insertion into the xarray that is
used to track records failed.
Effectively we end up ignoring that we are lacking qgroup record in the
dirty extents xarray, resulting in incorrect qgroup accounting.
Fix this by checking for errors and return them to the callers.
Fixes: 3cce39a8ca4e ("btrfs: qgroup: use xarray to track dirty extents in transaction")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are reports that system cannot suspend due to running trim because
the task responsible for trimming the device isn't able to finish in
time, especially since we have a free extent discarding phase, which can
trim a lot of unallocated space. There are no limits on the trim size
(unlike the block group part).
Since trime isn't a critical call it can be interrupted at any time,
in such cases we stop the trim, report the amount of discarded bytes and
return an error.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219180
Link: https://bugzilla.suse.com/show_bug.cgi?id=1229737
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Per Qu Wenruo in case we have a very large disk, e.g. 8TiB device,
mostly empty although we will do the split according to our super block
locations, the last super block ends at 256G, we can submit a huge
discard for the range [256G, 8T), causing a large delay.
Split the space left to discard based on BTRFS_MAX_DISCARD_CHUNK_SIZE in
preparation of introduction of cancellation points to trim. The value
of the chunk size is arbitrary, it can be higher or derived from actual
device capabilities but we can't easily read that using
bio_discard_limit().
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219180
Link: https://bugzilla.suse.com/show_bug.cgi?id=1229737
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
scx_qmap and other schedulers in the SCX repo are using SCX_ENQ_WAKEUP to
tell whether ops.select_cpu() was called. This is incorrect as
ops.select_cpu() can be skipped in the wakeup path and leads to e.g.
incorrectly skipping direct dispatch for tasks that are bound to a single
CPU.
sched core has been updated to specify ENQUEUE_RQ_SELECTED if
->select_task_rq() was called. Map it to SCX_ENQ_CPU_SELECTED and update
scx_qmap to test it instead of SCX_ENQ_WAKEUP.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Cc: Daniel Hodges <hodges.daniel.scott@gmail.com>
Cc: Changwoo Min <multics69@gmail.com>
Cc: Andrea Righi <andrea.righi@linux.dev>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
|
|
was called
During ttwu, ->select_task_rq() can be skipped if only one CPU is allowed or
migration is disabled. sched_ext schedulers may perform operations such as
direct dispatch from ->select_task_rq() path and it is useful for them to
know whether ->select_task_rq() was skipped in the ->enqueue_task() path.
Currently, sched_ext schedulers are using ENQUEUE_WAKEUP for this purpose
and end up assuming incorrectly that ->select_task_rq() was called for tasks
that are bound to a single CPU or migration disabled.
Make select_task_rq() indicate whether ->select_task_rq() was called by
setting WF_RQ_SELECTED in *wake_flags and make ttwu_do_activate() map that
to ENQUEUE_RQ_SELECTED for ->enqueue_task().
This will be used by sched_ext to fix ->select_task_rq() skip detection.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
|
value
This will be used to allow select_task_rq() to indicate whether
->select_task_rq() was called by modifying *wake_flags.
This makes try_to_wake_up() call all functions that take wake_flags with
WF_TTWU set. Previously, only select_task_rq() was. Using the same flags is
more consistent, and, as the flag is only tested by ->select_task_rq()
implementations, it doesn't cause any behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
|
