| Age | Commit message (Collapse) | Author |
|---|
|
virt device tree incorrectly uses 0xf0000000 on both sides of PCI IO
ports address space mapping. This results in incorrect port address
assignment in PCI IO BARs and subsequent crash on attempt to access
them. Use 0 as base address in PCI IO ports address space.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Commit c312ef176399 "libata/ahci: Drop PCS quirk for Denverton and
beyond" got the polarity wrong on the check for which board-ids should
have the quirk applied. The board type board_ahci_pcs7 is defined at the
end of the list such that "pcs7" boards can be special cased in the
future if they need the quirk. All prior Intel board ids "<
board_ahci_pcs7" should proceed with applying the quirk.
Reported-by: Andreas Friedrich <afrie@gmx.net>
Reported-by: Stephen Douthit <stephend@silicom-usa.com>
Fixes: c312ef176399 ("libata/ahci: Drop PCS quirk for Denverton and beyond")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five changes, two in drivers (qla2xxx, zfcp), one to MAINTAINERS
(qla2xxx) and two in the core.
The last two are mostly about removing incorrect messages from the
kernel log: the resid message is definitely wrong and the sync cache
on protected drive problem is arguably wrong"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: MAINTAINERS: Update qla2xxx driver
scsi: zfcp: fix reaction on bit error threshold notification
scsi: core: save/restore command resid for error handling
scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry()
scsi: sd: Ignore a failure to sync cache due to lack of authorization
|
|
NET_VENDOR_BROADCOM is intended to control a kconfig menu only.
It should not have anything to do with code generation.
As such, it should not select DIMLIB for all drivers under
NET_VENDOR_BROADCOM. Instead each driver that needs DIMLIB should
select it (being the symbols SYSTEMPORT, BNXT, and BCMGENET).
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907021810220.13058@ramsan.of.borg/
Fixes: 4f75da3666c0 ("linux/dim: Move implementation to .c files")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Tal Gilboa <talgi@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: netdev@vger.kernel.org
Cc: linux-rdma@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use my kernel.org address for all entries in MAINTAINERS.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use my kernel.org address for all entries in MAINTAINERS.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
phydev->dev_flags is entirely dependent on the PHY device driver which
is going to be used, setting the internal GENET PHY revision in those
bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver
being used.
Fixes: 487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While invalidating the dst, we assign backhole_netdev instead of
loopback device. However, this device does not have idev pointer
and hence no ip6_ptr even if IPv6 is enabled. Possibly this has
triggered the syzbot reported crash.
The syzbot report does not have reproducer, however, this is the
only device that doesn't have matching idev created.
Crash instruction is :
static inline bool ip6_ignore_linkdown(const struct net_device *dev)
{
const struct inet6_dev *idev = __in6_dev_get(dev);
return !!idev->cnf.ignore_routes_with_linkdown; <= crash
}
Also ipv6 always assumes presence of idev and never checks for it
being NULL (as does the above referenced code). So adding a idev
for the blackhole_netdev to avoid this class of crashes in the future.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir Oltean says:
====================
Scatter/gather SPI for SJA1105 DSA
This is a small series that reduces the stack memory usage for the
sja1105 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reworks the SPI transfer implementation to make use of more of the
SPI core features. The main benefit is to avoid the memcpy in
sja1105_xfer_buf().
The memcpy was only needed because the function was transferring a
single buffer at a time. So it needed to copy the caller-provided buffer
at buf + 4, to store the SPI message header in the "headroom" area.
But the SPI core supports scatter-gather messages, comprised of multiple
transfers. We can actually use those to break apart every SPI message
into 2 transfers: one for the header and one for the actual payload.
To keep the behavior the same regarding the chip select signal, it is
necessary to tell the SPI core to de-assert the chip select after each
chunk. This was not needed before, because each spi_message contained
only 1 single transfer.
The meaning of the per-transfer cs_change=1 is:
- If the transfer is the last one of the message, keep CS asserted
- Otherwise, deassert CS
We need to deassert CS in the "otherwise" case, which was implicit
before.
Avoiding the memcpy creates yet another opportunity. The device can't
process more than 256 bytes of SPI payload at a time, so the
sja1105_xfer_long_buf() function used to exist, to split the larger
caller buffer into chunks.
But these chunks couldn't be used as scatter/gather buffers for
spi_message until now, because of that memcpy (we would have needed more
memory for each chunk). So we can now remove the sja1105_xfer_long_buf()
function and have a single implementation for long and short buffers.
Another benefit is lower usage of stack memory. Previously we had to
store 2 SPI buffers for each chunk. Due to the elimination of the
memcpy, we can now send pointers to the actual chunks from the
caller-supplied buffer to the SPI core.
Since the patch merges two functions into a rewritten implementation,
the function prototype was also changed, mainly for cosmetic consistency
with the structures used within it.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a cosmetic patch that reduces some boilerplate in the SPI
interaction of the driver.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The variable reg is being assigned a value that is never read
and is being re-assigned in the following for-loop. The
assignment is redundant and hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HAVE_FAST_GUP enables the lockless quick page table walker for simple
cases, and is a nice optimization for some random loads that can then
use get_user_pages_fast() rather than the more careful page walker.
However, for some unexplained reason, it seems to be subtly broken on
sparc64. The breakage is only with some compiler versions and some
hardware, and nobody seems to have figured out what triggers it,
although there's a simple reprodicer for the problem when it does
trigger.
The problem was introduced with the conversion to the generic GUP code
in commit 7b9afb86b632 ("sparc64: use the generic get_user_pages_fast
code"), but nothing looks obviously wrong in that conversion. It may be
a compiler bug that just hits us with the code reorganization. Or it
may be something very specific to sparc64.
This disables HAVE_FAST_GUP entirely. That makes things like futexes a
bit slower, but at least they work. If we can figure out the trigger,
that would be lovely, but it's been three months already..
Link: https://lore.kernel.org/lkml/20190717215956.GA30369@altlinux.org/
Fixes: 7b9afb86b632 ("sparc64: use the generic get_user_pages_fast code")
Reported-by: Dmitry V Levin <ldv@altlinux.org>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Requested-by: Meelis Roos <mroos@linux.ee>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.4
Second set of fixes for 5.4. ath10k regression and iwlwifi BAD_COMMAND
bug are the ones getting most reports at the moment.
ath10k
* fix throughput regression on QCA98XX
iwlwifi
* fix initialization of 3168 devices (the infamous BAD_COMMAND bug)
* other smaller fixes
rt2x00
* don't include input-polldev.h header
* fix hw reset to work during first 5 minutes of system run
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Panfrost uses multiple schedulers (one for each slot, so 2 in reality),
and on a timeout has to stop all the schedulers to safely perform a
reset. However more than one scheduler can trigger a timeout at the same
time. This race condition results in jobs being freed while they are
still in use.
When stopping other slots use cancel_delayed_work_sync() to ensure that
any timeout started for that slot has completed. Also use
mutex_trylock() to obtain reset_lock. This means that only one thread
attempts the reset, the other threads will simply complete without doing
anything (the first thread will wait for this in the call to
cancel_delayed_work_sync()).
While we're here and since the function is already dependent on
sched_job not being NULL, let's remove the unnecessary checks.
Fixes: aa20236784ab ("drm/panfrost: Prevent concurrent resets")
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009094456.9704-1-steven.price@arm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Fix a parisc-specific fallout of Christoph's
dma_set_mask_and_coherent() patches (Sven)
- Fix a vmap memory leak in ioremap()/ioremap() (Helge)
- Some minor cleanups and documentation updates (Nick, Helge)
* 'parisc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Remove 32-bit DMA enforcement from sba_iommu
parisc: Fix vmap memory leak in ioremap()/iounmap()
parisc: prefer __section from compiler_attributes.h
parisc: sysctl.c: Use CONFIG_PARISC instead of __hppa_ define
MAINTAINERS: Add hp_sdc drivers to parisc arch
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull dmi fix from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Fix unlikely out-of-bounds read in save_mem_devices
|
|
rq_qos_del() incorrectly assigns the node being deleted to the head if
it was the first on the list in the !prev path. Fix it by iterating
with ** instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Fixes: a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blkcg_activate_policy() has the following bugs.
* cf09a8ee19ad ("blkcg: pass @q and @blkcg into
blkcg_pol_alloc_pd_fn()") added @blkcg to ->pd_alloc_fn(); however,
blkcg_activate_policy() ends up using pd's allocated for the root
blkcg for all preallocations, so ->pd_init_fn() for non-root blkcgs
can be passed in pd's which are allocated for the root blkcg.
For blk-iocost, this means that ->pd_init_fn() can write beyond the
end of the allocated object as it determines the length of the flex
array at the end based on the blkcg's nesting level.
* Each pd is initialized as they get allocated. If alloc fails, the
policy will get freed with pd's initialized on it.
* After the above partial failure, the partial pds are not freed.
This patch fixes all the above issues by
* Restructuring blkcg_activate_policy() so that alloc and init passes
are separate. Init takes place only after all allocs succeeded and
on failure all allocated pds are freed.
* Unifying and fixing the cleanup of the remaining pd_prealloc.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: cf09a8ee19ad ("blkcg: pass @q and @blkcg into blkcg_pol_alloc_pd_fn()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
64-bit time is a signed quantity in the kernel, so the bulkstat
structure should reflect that. Note that the structure size stays
the same and that we have not yet published userspace headers for this
new ioctl so there are no users to break.
Fixes: 7035f9724f84 ("xfs: introduce new v5 bulkstat structure")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
There is a warning message in my test with below steps:
# rbd bench --io-type write --io-size 4K --io-threads 1 --io-pattern rand test &
# sleep 5
# pkill -9 rbd
# rbd map test &
# sleep 5
# pkill rbd
The reason is that the rbd_add_acquire_lock() is interruptable,
that means, when we kill the waiting on ->acquire_wait, the lock_dwork
could be still running.
1. do_rbd_add() 2. lock_dwork
rbd_add_acquire_lock()
- queue_delayed_work()
lock_dwork queued
- wait_for_completion_killable_timeout() <-- kill happen
rbd_dev_image_unlock() <-- UNLOCKED now, nothing to do.
rbd_dev_device_release()
rbd_dev_image_release()
- ...
lock successed here
- cancel_delayed_work_sync(&rbd_dev->lock_dwork)
Then when we reach the rbd_dev_free(), WARN_ON is triggered because
lock_state is not RBD_LOCK_STATE_UNLOCKED.
To fix it, this commit make sure the lock_dwork was finished before
calling rbd_dev_image_unlock().
On the other hand, this would not happend in do_rbd_remove(), because
after rbd mapped, lock_dwork will only be queued for IO request, and
request will continue unless lock_dwork finished. when we call
rbd_dev_image_unlock() in do_rbd_remove(), all requests are done.
That means, lock_state should not be locked again after
rbd_dev_image_unlock().
[ Cancel lock_dwork in rbd_add_acquire_lock(), only if the wait is
interrupted. ]
Fixes: 637cd060537d ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In the future, we're going to want to extend the ceph_reply_info_extra
for create replies. Currently though, the kernel code doesn't accept an
extra blob that is larger than the expected data.
Change the code to skip over any unrecognized fields at the end of the
extra blob, rather than returning -EIO.
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Now we recalculate the sequence of timeout with 'req->sequence =
ctx->cached_sq_head + count - 1', judge the right place to insert
for timeout_list by compare the number of request we still expected for
completion. But we have not consider about the situation of overflow:
1. ctx->cached_sq_head + count - 1 may overflow. And a bigger count for
the new timeout req can have a small req->sequence.
2. cached_sq_head of now may overflow compare with before req. And it
will lead the timeout req with small req->sequence.
This overflow will lead to the misorder of timeout_list, which can lead
to the wrong order of the completion of timeout_list. Fix it by reuse
req->submit.sequence to store the count, and change the logic of
inserting sort in io_timeout.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
During nvme_tcp_setup_cmd_pdu error flow, one must call nvme_cleanup_cmd
since it's symmetric to nvme_setup_cmd.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
During nvme_loop_queue_rq error flow, one must call nvme_cleanup_cmd since
it's symmetric to nvme_setup_cmd.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
IOMMU Event Log encodes 20-bit PASID for events:
ILLEGAL_DEV_TABLE_ENTRY
IO_PAGE_FAULT
PAGE_TAB_HARDWARE_ERROR
INVALID_DEVICE_REQUEST
as:
PASID[15:0] = bit 47:32
PASID[19:16] = bit 19:16
Note that INVALID_PPR_REQUEST event has different encoding
from the rest of the events as the following:
PASID[15:0] = bit 31:16
PASID[19:16] = bit 45:42
So, fixes the decoding logic.
Fixes: d64c0486ed50 ("iommu/amd: Update the PASID information printed to the system log")
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
As platform_get_irq() now prints an error when the interrupt does not
exist, calling it gratuitously causes scary messages like:
ipmmu-vmsa e6740000.mmu: IRQ index 0 not found
Fix this by moving the call to platform_get_irq() down, where the
existence of the interrupt is mandatory.
Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Till now the Rockchip iommu driver walked through the irq list via
platform_get_irq() until it encountered an ENXIO error. With the
recent change to add a central error message, this always results
in such an error for each iommu on probe and shutdown.
To not confuse people, switch to platform_count_irqs() to get the
actual number of interrupts before walking through them.
Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There is a bug in create_safe_exec_page(), when page table is allocated
it is not checked that table is allocated successfully:
But it is dereferenced in: pgd_none(READ_ONCE(*pgdp)). Check that
allocation was successful.
Fixes: 82869ac57b5d ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If CONFIG_ARM64_SVE=n then we fail to report ID_AA64ZFR0_EL1 as 0 when
read by userspace, despite being required by the architecture. Although
this is theoretically a change in ABI, userspace will first check for
the presence of SVE via the HWCAP or the ID_AA64PFR0_EL1.SVE field
before probing the ID_AA64ZFR0_EL1 register. Given that these are
reported correctly for this configuration, we can safely tighten up the
current behaviour.
Ensure ID_AA64ZFR0_EL1 is treated as RAZ when CONFIG_ARM64_SVE=n.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Fixes: 06a916feca2b ("arm64: Expose SVE2 features for userspace")
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Igor Russkikh says:
====================
Aquantia/Marvell AQtion atlantic driver fixes 10/2019
Here is a set of various bugfixes, to be considered for stable as well.
V2: double space removed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
macvlan and multicast handling is now mixed up.
The explicit issue is that macvlan interface gets broken (no traffic)
after clearing MULTICAST flag on the real interface.
We now do separate logic and consider both ALLMULTI and MULTICAST
flags on the device.
Fixes: 11ba961c9161 ("net: aquantia: Fix IFF_ALLMULTI flag functionality")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Individual descriptors on LRO TCP session should be checked
for CRC errors. It was discovered that HW recalculates
L4 checksums on LRO session and does not break it up on bad L4
csum.
Thus, driver should aggregate HW LRO L4 statuses from all individual
buffers of LRO session and drop packet if one of the buffers has bad
L4 checksum.
Fixes: f38f1ee8aeb2 ("net: aquantia: check rx csum for all packets in LRO session")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
>From HW specification to correctly reset HW caches (this is a required
workaround when stopping the device), register bit should actually
be toggled.
It was previosly always just set. Due to the way driver stops HW this
never actually caused any issues, but it still may, so cleaning this up.
Fixes: 7a1bb49461b1 ("net: aquantia: fix potential IOMMU fault after driver unbind")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Chip temperature is a two byte word, colocated internally with cable
length data. We do all readouts from HW memory by dwords, thus
we should clear extra high bytes, otherwise temperature output
gets weird as soon as we attach a cable to the NIC.
Fixes: 8f8940118654 ("net: aquantia: add infrastructure to readout chip temperature")
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Merge more fixes from Andrew Morton:
"The usual shower of hotfixes and some followups to the recently merged
page_owner enhancements"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/memory-failure: poison read receives SIGKILL instead of SIGBUS if mmaped more than once
mm/slab.c: fix kernel-doc warning for __ksize()
xarray.h: fix kernel-doc warning
bitmap.h: fix kernel-doc warning and typo
fs/fs-writeback.c: fix kernel-doc warning
fs/libfs.c: fix kernel-doc warning
fs/direct-io.c: fix kernel-doc warning
mm, compaction: fix wrong pfn handling in __reset_isolation_pfn()
mm, hugetlb: allow hugepage allocations to reclaim as needed
lib/test_meminit: add a kmem_cache_alloc_bulk() test
mm/slub.c: init_on_free=1 should wipe freelist ptr for bulk allocations
lib/generic-radix-tree.c: add kmemleak annotations
mm/slub: fix a deadlock in show_slab_objects()
mm, page_owner: rename flag indicating that page is allocated
mm, page_owner: decouple freeing stack trace from debug_pagealloc
mm, page_owner: fix off-by-one error in __set_page_owner_handle()
|
|
Vladimir Oltean says:
====================
PTP driver refactoring for SJA1105 DSA
This series creates a better separation between the driver core and the
PTP portion. Therefore, users who are not interested in PTP can get a
simpler and smaller driver by compiling it out.
This is in preparation for further patches: SPI transfer timestamping,
synchronizing the hardware clock (as opposed to keeping it
free-running), PPS input/output, etc.
====================
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The PTP command register contains enable bits for:
- Putting the 64-bit PTPCLKVAL register in add/subtract or write mode
- Taking timestamps off of the corrected vs free-running clock
- Starting/stopping the TTEthernet scheduling
- Starting/stopping PPS output
- Resetting the switch
When a command needs to be issued (e.g. "change the PTPCLKVAL from write
mode to add/subtract mode"), one cannot simply write to the command
register setting the PTPCLKADD bit to 1, because that would zeroize the
other settings. One also cannot do a read-modify-write (that would be
too easy for this hardware) because not all bits of the command register
are readable over SPI.
So this leaves us with the only option of keeping the value of the PTP
command register in the driver, and operating on that.
Actually there are 2 types of PTP operations now:
- Operations that modify the cached PTP command. These operate on
ptp_data->cmd as a pointer.
- Operations that apply all previously cached PTP settings, but don't
otherwise cache what they did themselves. The sja1105_ptp_reset
function is such an example. It copies the ptp_data->cmd on stack
before modifying and writing it to SPI.
This practically means that struct sja1105_ptp_cmd is no longer an
implementation detail, since it needs to be stored in full into struct
sja1105_ptp_data, and hence in struct sja1105_private. So the (*ptp_cmd)
function prototype can change and take struct sja1105_ptp_cmd as second
argument now.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a non-functional change with 2 goals (both for the case when
CONFIG_NET_DSA_SJA1105_PTP is not enabled):
- Reduce the size of the sja1105_private structure.
- Make the PTP code more self-contained.
Leaving priv->ptp_data.lock to be initialized in sja1105_main.c is not a
leftover: it will be used in a future patch "net: dsa: sja1105: Restore
PTP time after switch reset".
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new rule (as already started for sja1105_tas.h) is for functions of
optional driver components (ones which may be disabled via Kconfig - PTP
and TAS) to take struct dsa_switch *ds instead of struct sja1105_private
*priv as first argument.
This is so that forward-declarations of struct sja1105_private can be
avoided.
So make sja1105_ptp.h the second user of this rule.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need priv->ptp_caps to hold a structure and not just a pointer,
because we use container_of in the various PTP callbacks.
Therefore, the sja1105_ptp_caps structure declared in the global memory
of the driver serves no further purpose after copying it into
priv->ptp_caps.
So just populate priv->ptp_caps with the needed operations and remove
sja1105_ptp_caps.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We switch the default handler to be handle_bad_irq() instead of
handle_simple_irq() (which was not correct anyway).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The driver wants to initialize related registers before IRQ chip will be added.
That's why move it to a corresponding callback. It also fixes the NULL pointer
dereference.
Fixes: 8f86a5b4ad67 ("gpio: merrifield: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The driver wants to initialize related registers before IRQ chip will be added.
That's why move it to a corresponding callback. It also fixes the NULL pointer
dereference.
Fixes: 7b1e889436a1 ("gpio: lynxpoint: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The driver wants to initialize related registers before IRQ chip will be added.
That's why move it to a corresponding callback. It also fixes the NULL pointer
dereference.
Fixes: 8069e69a9792 ("gpio: intel-mid: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
After changing the drivers to use GPIO core to add an IRQ chip
it appears that some of them requires a hardware initialization
before adding the IRQ chip.
Add an optional callback ->init_hw() to allow that drivers
to initialize hardware if needed.
This change is a part of the fix NULL pointer dereference
brought to the several drivers recently.
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
During conversion to internal IRQ chip initialization the commit
8f86a5b4ad67 ("gpio: merrifield: Pass irqchip when adding gpiochip")
lost the irq_base assignment.
drivers/gpio/gpio-merrifield.c: In function ‘mrfld_gpio_probe’:
drivers/gpio/gpio-merrifield.c:405:17: warning: variable ‘irq_base’ set but not used [-Wunused-but-set-variable]
Assign the girq->first to it.
Fixes: 8f86a5b4ad67 ("gpio: merrifield: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Custom outs*/ins* implementations are long gone from the xtensa port,
remove matching EXPORT_SYMBOLs.
This fixes the following build warnings issued by modpost since commit
15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions"):
WARNING: "insb" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "insw" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "insl" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsb" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsw" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsl" [vmlinux] is a static EXPORT_SYMBOL
Cc: stable@vger.kernel.org
Fixes: d38efc1f150f ("xtensa: adopt generic io routines")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
more than once
Mmap /dev/dax more than once, then read the poison location using
address from one of the mappings. The other mappings due to not having
the page mapped in will cause SIGKILLs delivered to the process.
SIGKILL succeeds over SIGBUS, so user process loses the opportunity to
handle the UE.
Although one may add MAP_POPULATE to mmap(2) to work around the issue,
MAP_POPULATE makes mapping 128GB of pmem several magnitudes slower, so
isn't always an option.
Details -
ndctl inject-error --block=10 --count=1 namespace6.0
./read_poison -x dax6.0 -o 5120 -m 2
mmaped address 0x7f5bb6600000
mmaped address 0x7f3cf3600000
doing local read at address 0x7f3cf3601400
Killed
Console messages in instrumented kernel -
mce: Uncorrected hardware memory error in user-access at edbe201400
Memory failure: tk->addr = 7f5bb6601000
Memory failure: address edbe201: call dev_pagemap_mapping_shift
dev_pagemap_mapping_shift: page edbe201: no PUD
Memory failure: tk->size_shift == 0
Memory failure: Unable to find user space address edbe201 in read_poison
Memory failure: tk->addr = 7f3cf3601000
Memory failure: address edbe201: call dev_pagemap_mapping_shift
Memory failure: tk->size_shift = 21
Memory failure: 0xedbe201: forcibly killing read_poison:22434 because of failure to unmap corrupted page
=> to deliver SIGKILL
Memory failure: 0xedbe201: Killing read_poison:22434 due to hardware memory corruption
=> to deliver SIGBUS
Link: http://lkml.kernel.org/r/1565112345-28754-3-git-send-email-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Suggested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix kernel-doc warning in mm/slab.c:
mm/slab.c:4215: warning: Function parameter or member 'objp' not described in '__ksize'
Also add Return: documentation section for this function.
Link: http://lkml.kernel.org/r/68c9fd7d-f09e-d376-e292-c7b2bdf1774d@infradead.org
Fixes: 10d1f8cb3965 ("mm/slab: refactor common ksize KASAN logic into slab_common.c")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
