summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-04drm/msm: Move update_fences()Rob Clark
Small cleanup, update_fences() is used in the hangcheck path, but also in the normal retire path. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Drop chatty traceRob Clark
It is somewhat redundant with the gpu tracepoints, and anyways not too useful to justify spamming the log when debug traces are enabled. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Use correct drm_gem_object_put() in fail caseRob Clark
We only want to use the _unlocked() variant in the unlocked case. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/gem: Switch over to obj->resv for lockingRob Clark
This also converts the special msm_gem_get_vaddr_active() to expect the lock to already be held. There are two call-sites for this, one already has the lock held, so it is more straightforward to just open-code the locking for the other caller. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Do rpm get sooner in the submit pathRob Clark
Unfortunately, due to an dev_pm_opp locking interaction with mm->mmap_sem, we need to do pm get before aquiring obj locks, otherwise we can have anger lockdep with the chain: opp_table_lock --> &mm->mmap_sem --> reservation_ww_class_mutex For an explicit fencing userspace, the impact should be minimal as we do all the fence waits before this point. It could result in some needless resumes in error cases, etc. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/submit: Move copy_from_user ahead of locking bosRob Clark
We cannot switch to using obj->resv for locking without first moving all the copy_from_user() ahead of submit_lock_objects(). Otherwise in the mm fault path we aquire mm->mmap_sem before obj lock, but in the submit path the order is reversed. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/gem: Move locking in shrinker pathRob Clark
Move grabbing the bo lock into shrinker, with a msm_gem_trylock() to skip over bo's that are already locked. This gets rid of the nested lock classes. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/gem: Add some _locked() helpersRob Clark
When we cut-over to using dma_resv_lock/etc instead of msm_obj->lock, we'll need these for the submit path (where resv->lock is already held). Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/gem: Move prototypes to msm_gem.hRob Clark
Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/gem: Rename internal get_iova_locked helperRob Clark
We'll need to introduce a _locked() version of msm_gem_get_iova(), so we need to make that name available. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/gem: Add obj->lock wrappersRob Clark
This will make it easier to transition over to obj->resv locking for everything that is per-bo locking. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Fix a couple incorrect usages of get_vaddr_active()Rob Clark
The microcode bo's should never be madvise(WONTNEED), so these should not be using msm_gem_get_vaddr_active(). Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dsi: do not try reading 28nm vco rate if it's not enabledDmitry Baryshkov
Reading VCO rate for this PLL can cause boot stalls, if it is not enabled. Guard clk_hw_get_rate with a call to dsi_pll_28nm_clk_is_enabled(). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Fix duplicate gpu node in icc summaryAkhil P Oommen
The dev_pm_opp_of_add_table() api initializes the icc nodes for gpu indirectly. So we can avoid using of_icc_get() api in the common probe path. To improve this, move of_icc_get() to target specific code where it is required. This patch helps to fix duplicate gpu node listed in the interconnect summary from the debugfs. Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: fix clock scaling on non-sc7180 boardDmitry Baryshkov
c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") has added support for handling bandwidth voting in kms path in addition to old mdss path. However this broke all other platforms since _dpu_core_perf_crtc_update_bus() will now error out instead of properly calculating bandwidth and core clocks. Fix _dpu_core_perf_crtc_update_bus() to just skip bandwidth setting instead of returning an error in case kms->num_paths == 0 (MDSS is used for bandwidth management). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: c33b7c0389e1 ("drm/msm/dpu: add support for clk and bw scaling for display") Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: enable merge_3d support on sm8150/sm8250Dmitry Baryshkov
Handle new merge_3d block setup in dpu encoder code. Pass correct mode and id. Note, that merge_3d blocks are not handled via usual RM reservation mechanism, as each merge_3d block is tied to two PPs, so by reserving PP you get merge_3d automatically. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: setup merge modes in merge_3d blockDmitry Baryshkov
Handle setting up merge mode in merge_3d hardware block. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: handle merge_3d configuration in hw_ctl blockDmitry Baryshkov
Active HW CTL blocks need separate handling for merge_3d flushes. Implement necessary merge_3d configuration and flushing. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: initial support for merge3D hardware blockDmitry Baryshkov
Add initial support for merge3D hardware block on SM8[12]50. Merge3D is reposible for merging contents of two LMs (two PPs) into single interface. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: simplify interface flush handlingDmitry Baryshkov
Instead of calling 4 callbacks to set pending masks, call just one to update both pending_flush_mask and pending_intf_flush mask. Note, that CMD mode support incorrectly did not update pending_intf_flush mask, breaking CMD support on SC7180/SM8x50. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Implement shutdown callback for adrenoAkhil P Oommen
Implement the shutdown callback for adreno gpu platform device to safely shutdown it before a system reboot. This helps to avoid futher transactions from gpu after the smmu is moved to bypass mode. Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dp: add opp_table corner voting support base on dp_ink_clk rateKuogee Hsieh
Set link rate by using OPP set rate api so that CX level will be set accordingly based on the link rate. Changes in v2: -- remove dev from dp_ctrl_put() parameters -- Add more information to commit message Changes in v3: -- return when dev_pm_opp_set_clkname() failed Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Remove redundant null checkTian Tao
clk_prepare_enable() and clk_disable_unprepare() will check NULL clock parameter, so It is not necessary to add additional checks. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dsi_phy_10nm: implement PHY disablingDmitry Baryshkov
Implement phy_disable() callback to disable DSI PHY lanes and blocks when phy is not used. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: ff73ff194060 ("drm/msm/dsi: Populate the 10nm PHY funcs") Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dsi_phy_7nm: implement PHY disablingDmitry Baryshkov
Implement phy_disable() callback to disable DSI PHY lanes and blocks when phy is not used. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dsi_pll_10nm: restore VCO rate during restore_stateDmitry Baryshkov
PHY disable/enable resets PLL registers to default values. Thus in addition to restoring several registers we also need to restore VCO rate settings. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: c6659785dfb3 ("drm/msm/dsi/pll: call vco set rate explicitly") Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dsi_pll_7nm: restore VCO rate during restore_stateDmitry Baryshkov
PHY disable/enable resets PLL registers to default values. Thus in addition to restoring several registers we also need to restore VCO rate settings. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 1ef7c99d145c ("drm/msm/dsi: add support for 7nm DSI PHY/PLL") Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dpu: Add newline to printksStephen Boyd
Printk messages need newlines. Add it here. Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm/dp: DisplayPort PHY compliance tests fixupTanmay Shah
Bandwidth code was being used as test link rate. Fix this by converting bandwidth code to test link rate Do not reset voltage and pre-emphasis level during IRQ HPD attention interrupt. Also fix pre-emphasis parsing during test link status process Signed-off-by: Tanmay Shah <tanmay@codeaurora.org> Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets") Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-04drm/msm: Add missing struct identifierTian Tao
fix warnings reported by make W=1 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:195: warning: cannot understand function prototype: 'const struct dpu_intr_reg dpu_intr_set[] = ' drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c:252: warning: cannot understand function prototype: 'const struct dpu_irq_type dpu_irq_map[] = ' Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm: Add missing stub definitionRobin Murphy
DRM_MSM fails to build with DRM_MSM_DP=n; add the missing stub. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm: Unconditionally call dev_pm_opp_of_remove_table()Viresh Kumar
dev_pm_opp_of_remove_table() doesn't report any errors when it fails to find the OPP table with error -ENODEV (i.e. OPP table not present for the device). And we can call dev_pm_opp_of_remove_table() unconditionally here. While at it, also create a label to put clkname. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm/atomic: Convert to per-CRTC kthread_workRob Clark
Use a SCHED_FIFO kthread_worker for async atomic commits. We have a hard deadline if we don't want to miss a frame. Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm/kms: Update msm_kms_init/destroyRob Clark
Add msm_kms_destroy() and add err return from msm_kms_init(). Prep work for next patch. Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm/gpu: Convert retire/recover work to kthread_workerRob Clark
Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-11-01drm/msm/atomic: Drop per-CRTC locks in reverse orderRob Clark
lockdep dislikes seeing locks unwound in a non-nested fashion. Fixes: b3d91800d9ac ("drm/msm: Fix race condition in msm driver with async layer updates") Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
2020-11-01drm/msm: Fix race condition in msm driver with async layer updatesKrishna Manikandan
When there are back to back commits with async cursor update, there is a case where second commit can program the DPU hw blocks while first didn't complete flushing config to HW. Synchronize the compositions such that second commit waits until first commit flushes the composition. This change also introduces per crtc commit lock, such that commits on different crtcs are not blocked by each other. Changes in v2: - Use an array of mutexes in kms to handle commit lock per crtc. (Rob Clark) Changes in v3: - Add wrapper functions to handle lock and unlock of commit_lock for each crtc. (Rob Clark) Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-10-25Linux 5.10-rc1v5.10-rc1Linus Torvalds
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25kernel/sys.c: fix prototype of prctl_get_tid_address()Rasmus Villemoes
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25mm: remove kzfree() compatibility definitionEric Biggers
Commit 453431a54934 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25checkpatch: enable GIT_DIR environment use to set git repository locationJoe Perches
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25Merge tag 'timers-urgent-2020-10-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A time namespace fix and a matching selftest. The futex absolute timeouts which are based on CLOCK_MONOTONIC require time namespace corrected. This was missed in the original time namesapce support" * tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/timens: Add a test for futex() futex: Adjust absolute futex timeouts with per time namespace offset
2020-10-25Merge tag 'sched-urgent-2020-10-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Two scheduler fixes: - A trivial build fix for sched_feat() to compile correctly with CONFIG_JUMP_LABEL=n - Replace a zero lenght array with a flexible array" * tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/features: Fix !CONFIG_JUMP_LABEL case sched: Replace zero-length array with flexible-array
2020-10-25Merge tag 'perf-urgent-2020-10-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Thomas Gleixner: "A single fix to compute the field offset of the SNOOPX bit in the data source bitmask of perf events correctly" * tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: correct SNOOPX field offset
2020-10-25Merge tag 'locking-urgent-2020-10-25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Thomas Gleixner: "Just a trivial fix for kernel-doc warnings" * tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/seqlocks: Fix kernel-doc warnings
2020-10-25Merge tag 'ntb-5.10' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB fixes from Jon Mason. * tag 'ntb-5.10' of git://github.com/jonmason/ntb: NTB: Use struct_size() helper in devm_kzalloc() ntb: intel: Fix memleak in intel_ntb_pci_probe NTB: hw: amd: fix an issue about leak system resources
2020-10-25Merge branch 'i2c/for-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Regression fix for rc1 and stable kernels as well" * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
2020-10-25Merge tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull more cifs updates from Steve French: "Add support for stat of various special file types (WSL reparse points for char, block, fifo)" * tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number smb3: add some missing definitions from MS-FSCC smb3: remove two unused variables smb3: add support for stat of WSL reparse points for special file types
2020-10-25Merge branch 'parisc-5.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 04:11:57 +0000