| Age | Commit message (Collapse) | Author |
|---|
|
commit feb92d7d3813456c11dce21 "(ARC: perf: don't bail setup if pct irq
missing in device-tree)" introduced a silly brown-paper bag bug:
The assignment and comparison in an if statement were not bracketed
correctly leaving the order of evaluation undefined.
|
| if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
| ^^^ ^^^^
And given such a chance, the compiler will bite you hard, fully entitled
to generating this piece of beauty:
|
| # if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
|
| bl.d @platform_get_irq <-- irq returned in r0
|
| setge r2, r0, 0 <-- r2 is bool 1 or 0 if irq >= 0 true/false
| brlt.d r0, 0, @.L114
|
| st_s r2,[sp] <-- irq saved is bool 1 or 0, not actual return val
| st 1,[r3,160] # arc_pmu.18_29->irq <-- drops bool and assumes 1
|
| # return __request_percpu_irq(irq, handler, 0,
|
| bl.d @__request_percpu_irq;
| mov_s r0,1 <-- drops even bool and assumes 1 which fails
With the snafu fixed, everything is as expected.
| bl.d @platform_get_irq <-- returns irq in r0
|
| mov_s r2,r0
| brlt.d r2, 0, @.L112
|
| st_s r0,[sp] <-- irq isaved is actual return value above
| st r0,[r13,160] #arc_pmu.18_27->irq
|
| bl.d @__request_percpu_irq <-- r0 unchanged so actual irq returned
| add r4,r4,r12 #, tmp363, __ptr
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The siginificant new ext4 feature this time around is Harshad's new
fast_commit mode.
In addition, thanks to Mauricio for fixing a race where mmap'ed pages
that are being changed in parallel with a data=journal transaction
commit could result in bad checksums in the failure that could cause
journal replays to fail.
Also notable is Ritesh's buffered write optimization which can result
in significant improvements on parallel write workloads. (The kernel
test robot reported a 330.6% improvement on fio.write_iops on a 96
core system using DAX)
Besides that, we have the usual miscellaneous cleanups and bug fixes"
Link: https://lore.kernel.org/r/20200925071217.GO28663@shao2-debian
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (46 commits)
ext4: fix invalid inode checksum
ext4: add fast commit stats in procfs
ext4: add a mount opt to forcefully turn fast commits on
ext4: fast commit recovery path
jbd2: fast commit recovery path
ext4: main fast-commit commit path
jbd2: add fast commit machinery
ext4 / jbd2: add fast commit initialization
ext4: add fast_commit feature and handling for extended mount options
doc: update ext4 and journalling docs to include fast commit feature
ext4: Detect already used quota file early
jbd2: avoid transaction reuse after reformatting
ext4: use the normal helper to get the actual inode
ext4: fix bs < ps issue reported with dioread_nolock mount opt
ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()
ext4: data=journal: fixes for ext4_page_mkwrite()
jbd2, ext4, ocfs2: introduce/use journal callbacks j_submit|finish_inode_data_buffers()
jbd2: introduce/export functions jbd2_journal_submit|finish_inode_data_buffers()
ext4: introduce ext4_sb_bread_unmovable() to replace sb_bread_unmovable()
ext4: use ext4_sb_bread() instead of sb_bread()
...
|
|
The IO_REPARSE_TAG_LX_ tags originally were used by WSL but they
are preferred by the Linux client in some cases since, unlike
the NFS reparse tag (or EAs), they don't require an extra query
to determine which type of special file they represent.
Add support for readdir to recognize special file types of
FIFO, SOCKET, CHAR, BLOCK and SYMLINK. This can be tested
by creating these special files in WSL Linux and then
sharing that location on the Windows server and mounting
to the Windows server to access them.
Prior to this patch all of the special files would show up
as being of type 'file' but with this patch they can be seen
with the correct file type as can be seen below:
brwxr-xr-x 1 root root 0, 0 Oct 21 17:10 block
crwxr-xr-x 1 root root 0, 0 Oct 21 17:46 char
drwxr-xr-x 2 root root 0 Oct 21 18:27 dir
prwxr-xr-x 1 root root 0 Oct 21 16:21 fifo
-rwxr-xr-x 1 root root 0 Oct 21 15:48 file
lrwxr-xr-x 1 root root 0 Oct 21 15:52 symlink-to-file
TODO: go through all documented reparse tags to see if we can
reasonably map some of them to directories vs. files vs. symlinks
and also add support for device numbers for block and char
devices.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
The "end" pointer is either NULL or it points to the next byte to parse.
If there isn't a next byte then dereferencing "end" is an off-by-one out
of bounds error. And, of course, if it's NULL that leads to an Oops.
Printing "*end" doesn't seem very useful so let's delete this code.
Also for the last debug statement, I noticed that it should be printing
"sequence_end" instead of "end" so fix that as well.
Reported-by: Dominik Maier <dmaier@sect.tu-berlin.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix minor typo in new compression flag define
Reported-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This and related patches which move mount related
code to fs_context.c has the advantage of
shriking the code in fs/cifs/connect.c (which had
the second most lines of code of any of the files
in cifs.ko and was getting harder to read due
to its size) and will also make it easier to
switch over to the new mount API in the future.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Helps to shrink connect.c and make it more readable
by moving mount related code to fs_context.c and
fs_context.h
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
This patch moves the parsing of security mount options into
fs_context.ch. There are no changes to any logic.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
This will make it easier in the future, but also will allow us to
shrink connect.c which is getting too big, and harder to read
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
|
|
A break following a return statement is pointless, so drop all of
the breaks following return statements from this file.
Signed-off-by: Tom Rix <trix@redhat.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2020-10-22
1) Fix enforcing NULL check in verifier for new helper return types of
RET_PTR_TO_{BTF_ID,MEM_OR_BTF_ID}_OR_NULL, from Martin KaFai Lau.
2) Fix bpf_redirect_neigh() helper API before it becomes frozen by adding
nexthop information as argument, from Toke Høiland-Jørgensen.
3) Guard & fix compilation of bpf_tail_call_static() when __bpf__ arch is
not defined by compiler or clang too old, from Daniel Borkmann.
4) Remove misplaced break after return in attach_type_to_prog_type(), from
Tom Rix.
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull nfsd updates from Bruce Fields:
"The one new feature this time, from Anna Schumaker, is READ_PLUS,
which has the same arguments as READ but allows the server to return
an array of data and hole extents.
Otherwise it's a lot of cleanup and bugfixes"
* tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits)
NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy
SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
sunrpc: raise kernel RPC channel buffer size
svcrdma: fix bounce buffers for unaligned offsets and multiple pages
nfsd: remove unneeded break
net/sunrpc: Fix return value for sysctl sunrpc.transports
NFSD: Encode a full READ_PLUS reply
NFSD: Return both a hole and a data segment
NFSD: Add READ_PLUS hole segment encoding
NFSD: Add READ_PLUS data support
NFSD: Hoist status code encoding into XDR encoder functions
NFSD: Map nfserr_wrongsec outside of nfsd_dispatch
NFSD: Remove the RETURN_STATUS() macro
NFSD: Call NFSv2 encoders on error returns
NFSD: Fix .pc_release method for NFSv2
NFSD: Remove vestigial typedefs
NFSD: Refactor nfsd_dispatch() error paths
NFSD: Clean up nfsd_dispatch() variables
NFSD: Clean up stale comments in nfsd_dispatch()
NFSD: Clean up switch statement in nfsd_dispatch()
...
|
|
A break following a return statement is pointless, so drop it.
Signed-off-by: Tom Rix <trix@redhat.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
All avs drivers have now been moved to their corresponding soc specific
directories. Additionally, they don't depend on the POWER_AVS Kconfig
anymore. Therefore, let's simply drop the drivers/power/avs directory
altogether.
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Replace memcpy with structure assignment
- Remove unneeded codes and use helper function i_blocksize()
- Fix typos found by codespell
* tag 'exfat-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: remove useless check in exfat_move_file()
exfat: remove 'rwoffset' in exfat_inode_info
exfat: replace memcpy with structure assignment
exfat: remove useless directory scan in exfat_add_entry()
exfat: eliminate dead code in exfat_find()
exfat: use i_blocksize() to get blocksize
exfat: fix misspellings using codespell tool
|
|
The block layer provides special status codes when requests go beyond
the zone resource limits. Use these codes instead of the generic IOERR
for requests that exceed the max active or open limits the null_blk
device was configured with so that applications know how these special
conditions should be handled.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The avs drivers are all SoC specific drivers that doesn't share any code.
Instead they are located in a directory, mostly to keep similar
functionality together. From a maintenance point of view, it makes better
sense to collect SoC specific drivers like these, into the SoC specific
directories.
Therefore, let's move the qcom-cpr driver to the qcom directory.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Niklas Cassel <nks@flawful.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull 9p updates from Dominique Martinet:
"A couple of small fixes (loff_t overflow on 32bit, syzbot
uninitialized variable warning) and code cleanup (xen)"
* tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux:
net: 9p: initialize sun_server.sun_path to have addr's value only when addr is valid
9p/xen: Fix format argument warning
9P: Cast to loff_t before multiplying
|
|
Every close(io_uring) causes cancellation of all inflight requests
carrying ->files. That's not nice but was neccessary up until recently.
Now task->files removal is handled in the core code, so that part of
flush can be removed.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The function changed at some point, but the description was not
updated.
Link: https://lkml.kernel.org/r/20201017095246.5170-1-hqjagain@gmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
We don't need to check the new buffer size, and the return value
had confused resize_buffer_duplicate_size().
...
ret = ring_buffer_resize(trace_buf->buffer,
per_cpu_ptr(size_buf->data,cpu_id)->entries, cpu_id);
if (ret == 0)
per_cpu_ptr(trace_buf->data, cpu_id)->entries =
per_cpu_ptr(size_buf->data, cpu_id)->entries;
...
Link: https://lkml.kernel.org/r/20201019142242.11560-1-hqjagain@gmail.com
Cc: stable@vger.kernel.org
Fixes: d60da506cbeb3 ("tracing: Add a resize function to make one buffer equivalent to another buffer")
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
We correctly set io-wq NUMA node affinities when the io-wq context is
setup, but if an entire node CPU set is offlined and then brought back
online, the per node affinities are broken. Ensure that we set them
again whenever a CPU comes online. This ensures that we always track
the right node affinity. The usual cpuhp notifiers are used to drive it.
Reported-by: Zhang Qiang <qiang.zhang@windriver.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
By default, we set the passthru request allocation flag such that it
returns the error in the following code path and we fail the I/O when
BLK_MQ_REQ_NOWAIT is used for request allocation :-
nvme_alloc_request()
blk_mq_alloc_request()
blk_mq_queue_enter()
if (flag & BLK_MQ_REQ_NOWAIT)
return -EBUSY; <-- return if busy.
On some controllers using BLK_MQ_REQ_NOWAIT ends up in I/O error where
the controller is perfectly healthy and not in a degraded state.
Block layer request allocation does allow us to wait instead of
immediately returning the error when we BLK_MQ_REQ_NOWAIT flag is not
used. This has shown to fix the I/O error problem reported under
heavy random write workload.
Remove the BLK_MQ_REQ_NOWAIT parameter for passthru request allocation
which resolves this issue.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Clean up some confusing elements of nvmet_passthru_map_sg() by returning
early if the request is greater than the maximum bio size. This allows
us to drop the sg_cnt variable.
This should not result in any functional change but makes the code
clearer and more understandable. The original code allocated a truncated
bio then would return EINVAL when bio_add_pc_page() filled that bio. The
new code just returns EINVAL early if this would happen.
Fixes: c1fef73f793b ("nvmet: add passthru code to process commands")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Suggested-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
nvmet_passthru_map_sg() only supports mapping a single BIO, not a chain
so the effective maximum transfer should also be limitted by
BIO_MAX_PAGES (presently this works out to 1MB).
For PCI passthru devices the max_sectors would typically be more
limitting than BIO_MAX_PAGES, but this may not be true for all passthru
devices.
Fixes: c1fef73f793b ("nvmet: add passthru code to process commands")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When connecting a controller with a zero kato value using the following
command line
nvme connect -t tcp -n NQN -a ADDR -s PORT --keep-alive-tmo=0
the warning below can be reproduced:
WARNING: CPU: 1 PID: 241 at kernel/workqueue.c:1627 __queue_delayed_work+0x6d/0x90
with trace:
mod_delayed_work_on+0x59/0x90
nvmet_update_cc+0xee/0x100 [nvmet]
nvmet_execute_prop_set+0x72/0x80 [nvmet]
nvmet_tcp_try_recv_pdu+0x2f7/0x770 [nvmet_tcp]
nvmet_tcp_io_work+0x63f/0xb2d [nvmet_tcp]
...
This is caused by queuing up an uninitialized work. Althrough the
keep-alive timer is disabled during allocating the controller (fixed in
0d3b6a8d213a), ka_work still has a chance to run (called by
nvmet_start_ctrl).
Fixes: 0d3b6a8d213a ("nvmet: Disable keep-alive timer when kato is cleared to 0h")
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Like commit 5611ec2b9814 ("nvme-pci: prevent SK hynix PC400 from using
Write Zeroes command"), Sandisk Skyhawk has the same issue:
[ 6305.633887] blk_update_request: operation not supported error, dev nvme0n1, sector 340812032 op 0x9:(WRITE_ZEROES) flags 0x0 phys_seg 0 prio class 0
So also disable Write Zeroes command on Sandisk Skyhawk.
BugLink: https://bugs.launchpad.net/bugs/1899503
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The request's rq_disk isn't set for passthrough IO commands, so tracing
uses qid 0 for these which incorrectly decodes as an admin command. Use
the request_queue's queuedata instead since that value is always set for
the IO queues, and never set for the admin queue.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A crash happened due to injecting error test.
When a CQE has incorrect command id due do an error injection, the host
may find a request which is already freed. Dereferencing req->mr->rkey
causes a crash in nvme_rdma_process_nvme_rsp because the mr is already
freed.
Add a check for the mr to fix it.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A crash can happened when a connect is rejected. The host establishes
the connection after received ConnectReply, and then continues to send
the fabrics Connect command. If the controller does not receive the
ReadyToUse capsule, host may receive a ConnectReject reply.
Call nvme_rdma_destroy_queue_ib after the host received the
RDMA_CM_EVENT_REJECTED event. Then when the fabrics Connect command
times out, nvme_rdma_timeout calls nvme_rdma_complete_rq to fail the
request. A crash happenes due to use after free in
nvme_rdma_complete_rq.
nvme_rdma_destroy_queue_ib is redundant when handling the
RDMA_CM_EVENT_REJECTED event as nvme_rdma_destroy_queue_ib is already
called in connection failure handler.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Similar to 7980d2eabde8 ("ipvs: clear skb->tstamp in forwarding path").
fq qdisc requires tstamp to be cleared in forwarding path.
Fixes: 8203e2d844d3 ("net: clear skb->tstamp in forwarding paths")
Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If the cb function is already registered, should return the pointer
of the structure hda_jack_callback which contains this cb func, but
instead it returns the NULL.
Now fix it by replacing func_is_already_in_callback_list() with
find_callback_from_list().
Fixes: f4794c6064a8 ("ALSA: hda - Don't register a cb func if it is registered already")
Reported-and-suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20201022030221.22393-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After mac address change request completes successfully, the new mac
address need to be saved to adapter->mac_addr as well as
netdev->dev_addr. Otherwise, adapter->mac_addr still holds old
data.
Fixes: 62740e97881c ("net/ibmvnic: Update MAC address settings after adapter reset")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20201020223919.46106-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently, CONFIG_MPTCP_IPV6 no longer selects CONFIG_IPV6. As a
consequence, if CONFIG_MPTCP_IPV6=y is added to the kconfig, it will no
longer ensure CONFIG_IPV6=y. If it is not enabled, CONFIG_MPTCP_IPV6
will stay disabled and selftests will fail.
We also need CONFIG_IPV6 to be built-in. For more details, please see
commit 0ed37ac586c0 ("mptcp: depends on IPV6 but not as a module").
Note that 'make kselftest-merge' will take all 'config' files found in
'tools/testsing/selftests'. Because some of them already set
CONFIG_IPV6=y, MPTCP selftests were still passing. But they will fail if
MPTCP selftests are launched manually after having executed this command
to prepare the kernel config:
./scripts/kconfig/merge_config.sh -m .config \
./tools/testing/selftests/net/mptcp/config
Fixes: 010b430d5df5 ("mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20201021155549.933731-1-matthieu.baerts@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an UE or memory error exception is encountered the MCE handler
tries to find the pfn using addr_to_pfn() which takes effective
address as an argument, later pfn is used to poison the page where
memory error occurred, recent rework in this area made addr_to_pfn
to run in real mode, which can be fatal as it may try to access
memory outside RMO region.
Have two helper functions to separate things to be done in real mode
and virtual mode without changing any functionality. This also fixes
the following error as the use of addr_to_pfn is now moved to virtual
mode.
Without this change following kernel crash is seen on hitting UE.
[ 485.128036] Oops: Kernel access of bad area, sig: 11 [#1]
[ 485.128040] LE SMP NR_CPUS=2048 NUMA pSeries
[ 485.128047] Modules linked in:
[ 485.128067] CPU: 15 PID: 6536 Comm: insmod Kdump: loaded Tainted: G OE 5.7.0 #22
[ 485.128074] NIP: c00000000009b24c LR: c0000000000398d8 CTR: c000000000cd57c0
[ 485.128078] REGS: c000000003f1f970 TRAP: 0300 Tainted: G OE (5.7.0)
[ 485.128082] MSR: 8000000000001003 <SF,ME,RI,LE> CR: 28008284 XER: 00000001
[ 485.128088] CFAR: c00000000009b190 DAR: c0000001fab00000 DSISR: 40000000 IRQMASK: 1
[ 485.128088] GPR00: 0000000000000001 c000000003f1fbf0 c000000001634300 0000b0fa01000000
[ 485.128088] GPR04: d000000002220000 0000000000000000 00000000fab00000 0000000000000022
[ 485.128088] GPR08: c0000001fab00000 0000000000000000 c0000001fab00000 c000000003f1fc14
[ 485.128088] GPR12: 0000000000000008 c000000003ff5880 d000000002100008 0000000000000000
[ 485.128088] GPR16: 000000000000ff20 000000000000fff1 000000000000fff2 d0000000021a1100
[ 485.128088] GPR20: d000000002200000 c00000015c893c50 c000000000d49b28 c00000015c893c50
[ 485.128088] GPR24: d0000000021a0d08 c0000000014e5da8 d0000000021a0818 000000000000000a
[ 485.128088] GPR28: 0000000000000008 000000000000000a c0000000017e2970 000000000000000a
[ 485.128125] NIP [c00000000009b24c] __find_linux_pte+0x11c/0x310
[ 485.128130] LR [c0000000000398d8] addr_to_pfn+0x138/0x170
[ 485.128133] Call Trace:
[ 485.128135] Instruction dump:
[ 485.128138] 3929ffff 7d4a3378 7c883c36 7d2907b4 794a1564 7d294038 794af082 3900ffff
[ 485.128144] 79291f24 790af00e 78e70020 7d095214 <7c69502a> 2fa30000 419e011c 70690040
[ 485.128152] ---[ end trace d34b27e29ae0e340 ]---
Fixes: 9ca766f9891d ("powerpc/64s/pseries: machine check convert to use common event code")
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724063946.21378-1-ganeshgr@linux.ibm.com
|
|
This reverts commit 3618ad2a7c0e78e4258386394d5d5f92a3dbccf8.
When control vq is not negotiated, that commit causes a crash:
[ 72.229171] kernel BUG at drivers/net/virtio_net.c:1667!
[ 72.230266] invalid opcode: 0000 [#1] PREEMPT SMP
[ 72.231172] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc8-02934-g3618ad2a7c0e7 #1
[ 72.231172] EIP: virtnet_send_command+0x120/0x140
[ 72.231172] Code: 00 0f 94 c0 8b 7d f0 65 33 3d 14 00 00 00 75 1c 8d 65 f4 5b 5e 5f 5d c3 66 90 be 01 00 00 00 e9 6e ff ff ff 8d b6 00
+00 00 00 <0f> 0b e8 d9 bb 82 00 eb 17 8d b4 26 00 00 00 00 8d b4 26 00 00 00
[ 72.231172] EAX: 0000000d EBX: f72895c0 ECX: 00000017 EDX: 00000011
[ 72.231172] ESI: f7197800 EDI: ed69bd00 EBP: ed69bcf4 ESP: ed69bc98
[ 72.231172] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010246
[ 72.231172] CR0: 80050033 CR2: 00000000 CR3: 02c84000 CR4: 000406f0
[ 72.231172] Call Trace:
[ 72.231172] ? __virt_addr_valid+0x45/0x60
[ 72.231172] ? ___cache_free+0x51f/0x760
[ 72.231172] ? kobject_uevent_env+0xf4/0x560
[ 72.231172] virtnet_set_guest_offloads+0x4d/0x80
[ 72.231172] virtnet_set_features+0x85/0x120
[ 72.231172] ? virtnet_set_guest_offloads+0x80/0x80
[ 72.231172] __netdev_update_features+0x27a/0x8e0
[ 72.231172] ? kobject_uevent+0xa/0x20
[ 72.231172] ? netdev_register_kobject+0x12c/0x160
[ 72.231172] register_netdevice+0x4fe/0x740
[ 72.231172] register_netdev+0x1c/0x40
[ 72.231172] virtnet_probe+0x728/0xb60
[ 72.231172] ? _raw_spin_unlock+0x1d/0x40
[ 72.231172] ? virtio_vdpa_get_status+0x1c/0x20
[ 72.231172] virtio_dev_probe+0x1c6/0x271
[ 72.231172] really_probe+0x195/0x2e0
[ 72.231172] driver_probe_device+0x26/0x60
[ 72.231172] device_driver_attach+0x49/0x60
[ 72.231172] __driver_attach+0x46/0xc0
[ 72.231172] ? device_driver_attach+0x60/0x60
[ 72.231172] bus_add_driver+0x197/0x1c0
[ 72.231172] driver_register+0x66/0xc0
[ 72.231172] register_virtio_driver+0x1b/0x40
[ 72.231172] virtio_net_driver_init+0x61/0x86
[ 72.231172] ? veth_init+0x14/0x14
[ 72.231172] do_one_initcall+0x76/0x2e4
[ 72.231172] ? rdinit_setup+0x2a/0x2a
[ 72.231172] do_initcalls+0xb2/0xd5
[ 72.231172] kernel_init_freeable+0x14f/0x179
[ 72.231172] ? rest_init+0x100/0x100
[ 72.231172] kernel_init+0xd/0xe0
[ 72.231172] ret_from_fork+0x1c/0x30
[ 72.231172] Modules linked in:
[ 72.269563] ---[ end trace a6ebc4afea0e6cb1 ]---
The reason is that virtnet_set_features now calls virtnet_set_guest_offloads
unconditionally, it used to only call it when there is something
to configure.
If device does not have a control vq, everything breaks.
Revert the original commit for now.
Cc: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Fixes: 3618ad2a7c0e7 ("virtio-net: ethtool configurable RXCSUM")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20201021142944.13615-1-mst@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC 4.9 sometimes fails to build with "m<>" constraint in
inline assembly.
CC lib/iov_iter.o
In file included from ./arch/powerpc/include/asm/cmpxchg.h:6:0,
from ./arch/powerpc/include/asm/atomic.h:11,
from ./include/linux/atomic.h:7,
from ./include/linux/crypto.h:15,
from ./include/crypto/hash.h:11,
from lib/iov_iter.c:2:
lib/iov_iter.c: In function 'iovec_from_user.part.30':
./arch/powerpc/include/asm/uaccess.h:287:2: error: 'asm' operand has impossible constraints
__asm__ __volatile__( \
^
./include/linux/compiler.h:78:42: note: in definition of macro 'unlikely'
# define unlikely(x) __builtin_expect(!!(x), 0)
^
./arch/powerpc/include/asm/uaccess.h:583:34: note: in expansion of macro 'unsafe_op_wrap'
#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
^
./arch/powerpc/include/asm/uaccess.h:329:10: note: in expansion of macro '__get_user_asm'
case 4: __get_user_asm(x, (u32 __user *)ptr, retval, "lwz"); break; \
^
./arch/powerpc/include/asm/uaccess.h:363:3: note: in expansion of macro '__get_user_size_allowed'
__get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \
^
./arch/powerpc/include/asm/uaccess.h:100:2: note: in expansion of macro '__get_user_nocheck'
__get_user_nocheck((x), (ptr), sizeof(*(ptr)), false)
^
./arch/powerpc/include/asm/uaccess.h:583:49: note: in expansion of macro '__get_user_allowed'
#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
^
lib/iov_iter.c:1663:3: note: in expansion of macro 'unsafe_get_user'
unsafe_get_user(len, &uiov[i].iov_len, uaccess_end);
^
make[1]: *** [scripts/Makefile.build:283: lib/iov_iter.o] Error 1
Define a UPD_CONSTR macro that is "<>" by default and
only "" with GCC prior to GCC 5.
Fixes: fcf1f26895a4 ("powerpc/uaccess: Add pre-update addressing to __put_user_asm_goto()")
Fixes: 2f279eeb68b8 ("powerpc/uaccess: Add pre-update addressing to __get_user_asm() and __put_user_asm()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/212d3bc4a52ca71523759517bb9c61f7e477c46a.1603179582.git.christophe.leroy@csgroup.eu
|
|
During the stability test, there are some errors:
ext4_lookup:1590: inode #6967: comm fsstress: iget: checksum invalid.
If the inode->i_iblocks too big and doesn't set huge file flag, checksum
will not be recalculated when update the inode information to it's buffer.
If other inode marks the buffer dirty, then the inconsistent inode will
be flushed to disk.
Fix this problem by checking i_blocks in advance.
Cc: stable@kernel.org
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20201020013631.3796673-1-luomeng12@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This commit adds a file in procfs that tracks fast commit related
statistics.
root@kvm-xfstests:/mnt# cat /proc/fs/ext4/vdc/fc_info
fc stats:
7772 commits
15 ineligible
4083 numblks
2242us avg_commit_time
Ineligible reasons:
"Extended attributes changed": 0
"Cross rename": 0
"Journal flag changed": 0
"Insufficient memory": 0
"Swap boot": 0
"Resize": 0
"Dir renamed": 0
"Falloc range op": 0
"FC Commit Failed": 15
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-10-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This is a debug only mount option that forcefully turns fast commits
on at mount time.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-9-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch adds fast commit recovery path support for Ext4 file
system. We add several helper functions that are similar in spirit to
e2fsprogs journal recovery path handlers. Example of such functions
include - a simple block allocator, idempotent block bitmap update
function etc. Using these routines and the fast commit log in the fast
commit area, the recovery path (ext4_fc_replay()) performs fast commit
log recovery.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch adds fast commit recovery support in JBD2.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-7-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch adds main fast commit commit path handlers. The overall
patch can be divided into two inter-related parts:
(A) Metadata updates tracking
This part consists of helper functions to track changes that need
to be committed during a commit operation. These updates are
maintained by Ext4 in different in-memory queues. Following are
the APIs and their short description that are implemented in this
patch:
- ext4_fc_track_link/unlink/creat() - Track unlink. link and creat
operations
- ext4_fc_track_range() - Track changed logical block offsets
inodes
- ext4_fc_track_inode() - Track inodes
- ext4_fc_mark_ineligible() - Mark file system fast commit
ineligible()
- ext4_fc_start_update() / ext4_fc_stop_update() /
ext4_fc_start_ineligible() / ext4_fc_stop_ineligible() These
functions are useful for co-ordinating inode updates with
commits.
(B) Main commit Path
This part consists of functions to convert updates tracked in
in-memory data structures into on-disk commits. Function
ext4_fc_commit() is the main entry point to commit path.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This functions adds necessary APIs needed in JBD2 layer for fast
commits.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch adds fast commit area trackers in the journal_t
structure. These are initialized via the jbd2_fc_init() routine that
this patch adds. This patch also adds ext4/fast_commit.c and
ext4/fast_commit.h files for fast commit code that will be added in
subsequent patches in this series.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-4-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We are running out of mount option bits. Add handling for using
s_mount_opt2. Add ext4 and jbd2 fast commit feature flag and also add
ability to turn off the fast commit feature in Ext4.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch adds necessary documentation for fast commits.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Skip disabled sa to correct the cu_info and active_rbs for sienna cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
|
|
if it's fine-grained clock dpm, remove the average clock value and
reflects the real clock.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
