summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-10-25net: ksz884x: fix missing pci_disable_device() on error in pcidev_init()Yang Yingliang
pci_disable_device() need be called while module exiting, switch to use pcim_enable(), pci_disable_device() will be called in pcim_release() while unbinding device. Fixes: 8ca86fd83eae ("net: Micrel KSZ8841/2 PCI Ethernet driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221024131338.2848959-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-25i40e: Fix flow-type by setting GL_HASH_INSET registersSlawomir Laba
Fix setting bits for specific flow_type for GLQF_HASH_INSET register. In previous version all of the bits were set only in hena register, while in inset only one bit was set. In order for this working correctly on all types of cards these bits needs to be set correctly for both hena and inset registers. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-3-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-25i40e: Fix VF hang when reset is triggered on another VFSylwester Dziedziuch
When a reset was triggered on one VF with i40e_reset_vf global PF state __I40E_VF_DISABLE was set on a PF until the reset finished. If immediately after triggering reset on one VF there is a request to reset on another it will cause a hang on VF side because VF will be notified of incoming reset but the reset will never happen because of this global state, we will get such error message: [ +4.890195] iavf 0000:86:02.1: Never saw reset and VF will hang waiting for the reset to be triggered. Fix this by introducing new VF state I40E_VF_STATE_RESETTING that will be set on a VF if it is currently resetting instead of the global __I40E_VF_DISABLE PF state. Fixes: 3ba9bcb4b68f ("i40e: add locking around VF reset") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-2-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-25i40e: Fix ethtool rx-flow-hash setting for X722Slawomir Laba
When enabling flow type for RSS hash via ethtool: ethtool -N $pf rx-flow-hash tcp4|tcp6|udp4|udp6 s|d the driver would fail to setup this setting on X722 device since it was using the mask on the register dedicated for X710 devices. Apply a different mask on the register when setting the RSS hash for the X722 device. When displaying the flow types enabled via ethtool: ethtool -n $pf rx-flow-hash tcp4|tcp6|udp4|udp6 the driver would print wrong values for X722 device. Fix this issue by testing masks for X722 device in i40e_get_rss_hash_opts function. Fixes: eb0dd6e4a3b3 ("i40e: Allow RSS Hash set with less than four parameters") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20221024100526.1874914-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-25ipv6: ensure sane device mtu in tunnelsEric Dumazet
Another syzbot report [1] with no reproducer hints at a bug in ip6_gre tunnel (dev:ip6gretap0) Since ipv6 mcast code makes sure to read dev->mtu once and applies a sanity check on it (see commit b9b312a7a451 "ipv6: mcast: better catch silly mtu values"), a remaining possibility is that a layer is able to set dev->mtu to an underflowed value (high order bit set). This could happen indeed in ip6gre_tnl_link_config_route(), ip6_tnl_link_config() and ipip6_tunnel_bind_dev() Make sure to sanitize mtu value in a local variable before it is written once on dev->mtu, as lockless readers could catch wrong temporary value. [1] skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:120 Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022 Workqueue: mld mld_ifc_work pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116 lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116 sp : ffff800020dd3b60 x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800 x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200 x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38 x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9 x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80 x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80 x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00 x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic+0x4c/0x50 net/core/skbuff.c:116 skb_over_panic net/core/skbuff.c:125 [inline] skb_put+0xd4/0xdc net/core/skbuff.c:2049 ip6_mc_hdr net/ipv6/mcast.c:1714 [inline] mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765 add_grhead net/ipv6/mcast.c:1851 [inline] add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989 mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115 mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653 process_one_work+0x2d8/0x504 kernel/workqueue.c:2289 worker_thread+0x340/0x610 kernel/workqueue.c:2436 kthread+0x12c/0x158 kernel/kthread.c:376 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000) Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221024020124.3756833-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-25fs/binfmt_elf: Fix memory leak in load_elf_binary()Li Zetao
There is a memory leak reported by kmemleak: unreferenced object 0xffff88817104ef80 (size 224): comm "xfs_admin", pid 47165, jiffies 4298708825 (age 1333.476s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 60 a8 b3 00 81 88 ff ff a8 10 5a 00 81 88 ff ff `.........Z..... backtrace: [<ffffffff819171e1>] __alloc_file+0x21/0x250 [<ffffffff81918061>] alloc_empty_file+0x41/0xf0 [<ffffffff81948cda>] path_openat+0xea/0x3d30 [<ffffffff8194ec89>] do_filp_open+0x1b9/0x290 [<ffffffff8192660e>] do_open_execat+0xce/0x5b0 [<ffffffff81926b17>] open_exec+0x27/0x50 [<ffffffff81a69250>] load_elf_binary+0x510/0x3ed0 [<ffffffff81927759>] bprm_execve+0x599/0x1240 [<ffffffff8192a997>] do_execveat_common.isra.0+0x4c7/0x680 [<ffffffff8192b078>] __x64_sys_execve+0x88/0xb0 [<ffffffff83bbf0a5>] do_syscall_64+0x35/0x80 If "interp_elf_ex" fails to allocate memory in load_elf_binary(), the program will take the "out_free_ph" error handing path, resulting in "interpreter" file resource is not released. Fix it by adding an error handing path "out_free_file", which will release the file resource when "interp_elf_ex" failed to allocate memory. Fixes: 0693ffebcfe5 ("fs/binfmt_elf.c: allocate less for static executable") Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221024154421.982230-1-lizetao1@huawei.com
2022-10-25exec: Copy oldsighand->action under spin-lockBernd Edlinger
unshare_sighand should only access oldsighand->action while holding oldsighand->siglock, to make sure that newsighand->action is in a consistent state. Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/AM8PR10MB470871DEBD1DED081F9CC391E4389@AM8PR10MB4708.EURPRD10.PROD.OUTLOOK.COM
2022-10-25overflow: Refactor test skips for Clang-specific issuesKees Cook
Convert test exclusion into test skipping. This brings the logic for why a test is being skipped into the test itself, instead of having to spread ifdefs around the code. This will make cleanup easier as minimum tests get raised. Drop __maybe_unused so missed tests will be noticed again and clean up whitespace. For example, clang-11 on i386: [15:52:32] ================== overflow (18 subtests) ================== [15:52:32] [PASSED] u8_u8__u8_overflow_test [15:52:32] [PASSED] s8_s8__s8_overflow_test [15:52:32] [PASSED] u16_u16__u16_overflow_test [15:52:32] [PASSED] s16_s16__s16_overflow_test [15:52:32] [PASSED] u32_u32__u32_overflow_test [15:52:32] [PASSED] s32_s32__s32_overflow_test [15:52:32] [SKIPPED] u64_u64__u64_overflow_test [15:52:32] [SKIPPED] s64_s64__s64_overflow_test [15:52:32] [SKIPPED] u32_u32__int_overflow_test [15:52:32] [PASSED] u32_u32__u8_overflow_test [15:52:32] [PASSED] u8_u8__int_overflow_test [15:52:32] [PASSED] int_int__u8_overflow_test [15:52:32] [PASSED] shift_sane_test [15:52:32] [PASSED] shift_overflow_test [15:52:32] [PASSED] shift_truncate_test [15:52:32] [PASSED] shift_nonsense_test [15:52:32] [PASSED] overflow_allocation_test [15:52:32] [PASSED] overflow_size_helpers_test [15:52:32] ==================== [PASSED] overflow ===================== [15:52:32] ============================================================ [15:52:32] Testing complete. Ran 18 tests: passed: 15, skipped: 3 Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Tom Rix <trix@redhat.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: llvm@lists.linux.dev Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20221006230017.1833458-1-keescook@chromium.org
2022-10-25overflow: disable failing tests for older clang versionsNick Desaulniers
Building the overflow kunit tests with clang-11 fails with: $ ./tools/testing/kunit/kunit.py run --arch=arm --make_options LLVM=1 \ overflow ... ld.lld: error: undefined symbol: __mulodi4 ... Clang 11 and earlier generate unwanted libcalls for signed output, unsigned input. Disable these tests for now, but should these become used in the kernel we might consider that as justification for dropping clang-11 support. Keep the clang-11 build alive a little bit longer. Avoid -Wunused-function warnings via __maybe_unused. To test W=1: $ make LLVM=1 -j128 defconfig $ ./scripts/config -e KUNIT -e KUNIT_ALL $ make LLVM=1 -j128 olddefconfig lib/overflow_kunit.o W=1 Link: https://github.com/ClangBuiltLinux/linux/issues/1711 Link: https://github.com/llvm/llvm-project/commit/3203143f1356a4e4e3ada231156fc6da6e1a9f9d Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221006171751.3444575-1-ndesaulniers@google.com
2022-10-25overflow: Fix kern-doc markup for functionsKees Cook
Fix the kern-doc markings for several of the overflow helpers and move their location into the core kernel API documentation, where it belongs (it's not driver-specific). Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: linux-hardening@vger.kernel.org Reviewed-by: Akira Yokosawa <akiyks@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2022-10-25tools headers cpufeatures: Sync with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: 257449c6a50298bd ("x86/cpufeatures: Add LbrExtV2 feature bit") This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Link: https://lore.kernel.org/lkml/Y1g6vGPqPhOrXoaN@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25tools headers uapi: Sync linux/stat.h with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes from: 825cf206ed510c4a ("statx: add direct I/O alignment information") That add a constant that was manually added to tools/perf/trace/beauty/statx.c, at some point this should move to the shell based automated way. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/stat.h' differs from latest version at 'include/uapi/linux/stat.h' diff -u tools/include/uapi/linux/stat.h include/uapi/linux/stat.h Cc: Eric Biggers <ebiggers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/Y1gGQL5LonnuzeYd@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25tools include UAPI: Sync sound/asound.h copy with the kernel sourcesArnaldo Carvalho de Melo
Picking the changes from: 69ab6f5b00b1804e ("ALSA: Remove some left-over license text in include/uapi/sound/") Which entails no changes in the tooling side as it doesn't introduce new SNDRV_PCM_IOCTL_ ioctls. To silence this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h' diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25tools headers uapi: Update linux/in.h copyArnaldo Carvalho de Melo
To get the changes in: 65b32f801bfbc54d ("uapi: move IPPROTO_L2TP to in.h") 5854a09b49574da5 ("net/ipv4: Use __DECLARE_FLEX_ARRAY() helper") That ends up automatically adding the new IPPROTO_L2TP to the socket args beautifiers: $ tools/perf/trace/beauty/socket.sh > before $ cp include/uapi/linux/in.h tools/include/uapi/linux/in.h $ tools/perf/trace/beauty/socket.sh > after $ diff -u before after --- before 2022-10-25 12:17:02.577892416 -0300 +++ after 2022-10-25 12:17:10.806113033 -0300 @@ -20,6 +20,7 @@ [98] = "ENCAP", [103] = "PIM", [108] = "COMP", + [115] = "L2TP", [132] = "SCTP", [136] = "UDPLITE", [137] = "MPLS", $ Now 'perf trace' will decode that 115 into "L2TP" and it will also be possible to use it in tracepoint filter expressions. Addresses this tools/perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h' diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Wojciech Drewek <wojciech.drewek@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/lkml/Y1f%2FGe6vjQrGjYiK@kernel.org/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25tools headers: Update the copy of x86's memcpy_64.S used in 'perf bench'Arnaldo Carvalho de Melo
We also need to add SYM_TYPED_FUNC_START() to util/include/linux/linkage.h and update tools/perf/check_headers.sh to ignore the include cfi_types.h line when checking if the kernel original files drifted from the copies we carry. This is to get the changes from: ccace936eec7b805 ("x86: Add types to indirectly called assembly functions") Addressing these tools/perf build warnings: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Sami Tolvanen <samitolvanen@google.com> Link: https://lore.kernel.org/lkml/Y1f3VRIec9EBgX6F@kernel.org/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25tools headers arm64: Sync arm64's cputype.h with the kernel sourcesArnaldo Carvalho de Melo
To get the changes in: 0e5d5ae837c8ce04 ("arm64: Add AMPERE1 to the Spectre-BHB affected list") That addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h' diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: D Scott Phillips <scott@os.amperecomputing.com> https://lore.kernel.org/lkml/Y1fy5GD7ZYvkeufv@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25perf test: Do not fail Intel-PT misc test w/o libpythonNamhyung Kim
The virtual LBR test uses a python script to check the max size of branch stack in the Intel-PT generated LBR. But it didn't check whether python scripting is available (as it's optional). Let's skip the test if the python support is not available. Fixes: f77811a0f62577d2 ("perf test: test_intel_pt.sh: Add 9 tests") Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Ammy Yi <ammy.yi@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221021181055.60183-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25perf list: Fix PMU name pai_crypto in perf list on s390Thomas Richter
Commit e0b23af82d6f454c ("perf list: Add PMU pai_crypto event description for IBM z16") introduced the "Processor Activity Instrumentation" for cryptographic counters for z16. The PMU device driver exports the counters via sysfs files listed in directory /sys/devices/pai_crypto. To specify an event from that PMU, use 'perf stat -e pai_crypto/XXX/'. However the JSON file mentioned in above commit exports the counter decriptions in file pmu-events/arch/s390/cf_z16/pai.json. Rename this file to pmu-events/arch/s390/cf_z16/pai_crypto.json to make the naming consistent. Now 'perf list' shows the counter names under pai_crypto section: pai_crypto: CRYPTO_ALL [CRYPTO ALL. Unit: pai_crypto] ... Output before was pai: CRYPTO_ALL [CRYPTO ALL. Unit: pai_crypto] ... Fixes: e0b23af82d6f454c ("perf list: Add PMU pai_crypto event description for IBM z16") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: https://lore.kernel.org/r/20221021082557.2695382-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25perf record: Fix event fd racesIan Rogers
The write call may set errno which is problematic if occurring in a function also setting errno. Save and restore errno around the write call. done_fd may be used after close, clear it as part of the close and check its validity in the signal handler. Suggested-by: <gthelen@google.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anand K Mistry <amistry@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20221024011024.462518-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25perf bpf: Fix build with libbpf 0.7.0 by checking if ↵Arnaldo Carvalho de Melo
bpf_program__set_insns() is available During the transition to libbpf 1.0 some functions that perf used were deprecated and finally removed from libbpf, so bpf_program__set_insns() was introduced for perf to continue to use its bpf loader. But when build with LIBBPF_DYNAMIC=1 we now need to check if that function is available so that perf can build with older libbpf versions, even if the end result is emitting a warning to the user that the use of the perf BPF loader requires a newer libbpf, since bpf_program__set_insns() touches libbpf objects internal state. This affects only 'perf trace' when using bpf C code or pre-compiled bytecode as an event. Noticed on RHEL9, that has libbpf 0.7.0, where bpf_program__set_insns() isn't available. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25perf bpf: Fix build with libbpf 0.7.0 by adding prototype for bpf_load_program()Arnaldo Carvalho de Melo
The bpf_load_program() prototype appeared in tools/lib/bpf/bpf.h as deprecated, but nowadays its completely removed, so add it back for building with the system libbpf when using 'make LIBBPF_DYNAMIC=1'. This is a stop gap hack till we do like tools/bpf does with bpftool, i.e. bootstrap the libbpf build and install it in the perf build directory when not using 'make LIBBPF_DYNAMIC=1'. That has to be done to all libraries in tools/lib/, so tha we can remove -Itools/lib/ from the tools/perf CFLAGS. Noticed when building with LIBBPF_DYNAMIC=1 and libbpf 0.7.0 on RHEL9. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25perf vendor events power10: Fix hv-24x7 metric eventsKajol Jain
Testcase stat_all_metrics.sh fails in powerpc: 90: perf all metrics test : FAILED! The testcase "stat_all_metrics.sh" verifies perf stat result for all the metric events present in perf list. It runs perf metric events with various commands and expects non-empty metric result. Incase of powerpc:hv-24x7 events, some of the event count can be 0 based on system configuration. And if that event used as denominator in divide equation, it can cause divide by 0 error. The current nest_metric.json file creating divide by 0 issue for some of the metric events, which results in failure of the "stat_all_metrics.sh" test case. Most of the metrics events have cycles or an event which expect to have a larger value as denominator, so adding 1 to the denominator of the metric expression as a fix. Result in powerpc box after this patch changes: 90: perf all metrics test : Ok Fixes: a3cbcadfdfc330c2 ("perf vendor events power10: Adds 24x7 nest metric events for power10 platform") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Link: https://lore.kernel.org/r/20221014140220.122251-1-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25perf docs: Fix man page build wrt perf-arm-coresight.txtAdrian Hunter
perf build assumes documentation files starting with "perf-" are man pages but perf-arm-coresight.txt is not a man page: asciidoc: ERROR: perf-arm-coresight.txt: line 2: malformed manpage title asciidoc: ERROR: perf-arm-coresight.txt: line 3: name section expected asciidoc: FAILED: perf-arm-coresight.txt: line 3: section title expected make[3]: *** [Makefile:266: perf-arm-coresight.xml] Error 1 make[3]: *** Waiting for unfinished jobs.... make[2]: *** [Makefile.perf:895: man] Error 2 Fix by renaming it. Fixes: dc2e0fb00bb2b24f ("perf test coresight: Add relevant documentation about ARM64 CoreSight testing") Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reported-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Carsten Haitzler <carsten.haitzler@arm.com> Cc: coresight@lists.linaro.org Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/a176a3e1-6ddc-bb63-e41c-15cda8c2d5d2@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25tools headers UAPI: Sync powerpc syscall tables with the kernel sourcesArnaldo Carvalho de Melo
To pick the changes in these csets: e237506238352f3b ("powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs") That doesn't cause any changes in the perf tools. As a reminder, this table is used in tools perf to allow features such as: [root@five ~]# perf trace -e set_mempolicy_home_node ^C[root@five ~]# [root@five ~]# perf trace -v -e set_mempolicy_home_node Using CPUID AuthenticAMD-25-21-0 event qualifier tracepoint filter: (common_pid != 253729 && common_pid != 3585) && (id == 450) mmap size 528384B ^C[root@five ~] [root@five ~]# perf trace -v -e set* --max-events 5 Using CPUID AuthenticAMD-25-21-0 event qualifier tracepoint filter: (common_pid != 253734 && common_pid != 3585) && (id == 38 || id == 54 || id == 105 || id == 106 || id == 109 || id == 112 || id == 113 || id == 114 || id == 116 || id == 117 || id == 119 || id == 122 || id == 123 || id == 141 || id == 160 || id == 164 || id == 170 || id == 171 || id == 188 || id == 205 || id == 218 || id == 238 || id == 273 || id == 308 || id == 450) mmap size 528384B 0.000 ( 0.008 ms): bash/253735 setpgid(pid: 253735 (bash), pgid: 253735 (bash)) = 0 6849.011 ( 0.008 ms): bash/16046 setpgid(pid: 253736 (bash), pgid: 253736 (bash)) = 0 6849.080 ( 0.005 ms): bash/253736 setpgid(pid: 253736 (bash), pgid: 253736 (bash)) = 0 7437.718 ( 0.009 ms): gnome-shell/253737 set_robust_list(head: 0x7f34b527e920, len: 24) = 0 13445.986 ( 0.010 ms): bash/16046 setpgid(pid: 253738 (bash), pgid: 253738 (bash)) = 0 [root@five ~]# That is the filter expression attached to the raw_syscalls:sys_{enter,exit} tracepoints. $ find tools/perf/arch/ -name "syscall*tbl" | xargs grep -w set_mempolicy_home_node tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node tools/perf/arch/powerpc/entry/syscalls/syscall.tbl:450 nospu set_mempolicy_home_node sys_set_mempolicy_home_node tools/perf/arch/s390/entry/syscalls/syscall.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node sys_set_mempolicy_home_node tools/perf/arch/x86/entry/syscalls/syscall_64.tbl:450 common set_mempolicy_home_node sys_set_mempolicy_home_node $ $ grep -w set_mempolicy_home_node /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c [450] = "set_mempolicy_home_node", $ This addresses these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h' diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl' diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Link: https://lore.kernel.org/lkml/Y01HN2DGkWz8tC%2FJ@kernel.org/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-25Merge tag 'platform-drivers-x86-v6.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "The only thing which stands out is a fix for a backlight regression on Chromebooks (under drivers/acpi, with ack from Rafael). Other then that nothing special to report just various small fixes and hardware-id additions" * tag 'platform-drivers-x86-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: ACPI: video: Fix missing native backlight on Chromebooks platform/x86/intel: pmc/core: Add Raptor Lake support to pmc core driver leds: simatic-ipc-leds-gpio: fix incorrect LED to GPIO mapping platform/x86/amd: pmc: Read SMU version during suspend on Cezanne systems platform/x86: thinkpad_acpi: Fix reporting a non present second fan on some models platform/x86: asus-wmi: Add support for ROG X16 tablet mode
2022-10-25device property: Fix documentation for *_match_string() APIsAndy Shevchenko
The returned value on success is an index of the matching string, starting from 0. Reflect this in the documentation. Fixes: 3f5c8d318785 ("device property: Add fwnode_property_match_string()") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-25xhci: Remove device endpoints from bandwidth list when freeing the deviceMathias Nyman
Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to delete already freed endpoints from the bandwidth list. This only affects hosts that use software bandwidth checking, which currenty is only the xHC in intel Panther Point PCH (Ivy Bridge) Cc: stable@vger.kernel.org Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devicesMario Limonciello
For optimal power consumption of USB4 routers the XHCI PCIe endpoint used for tunneling must be in D3. Historically this is accomplished by a long list of PCIe IDs that correspond to these endpoints because the xhci_hcd driver will not default to allowing runtime PM for all devices. As both AMD and Intel have released new products with new XHCI controllers this list continues to grow. In reviewing the XHCI specification v1.2 on page 607 there is already a requirement that the PCI power management states D3hot and D3cold must be supported. In the quirk list, use this to indicate that runtime PM should be allowed on XHCI controllers. The following controllers are known to be xHC 1.2 and dropped explicitly: * AMD Yellow Carp * Intel Alder Lake * Intel Meteor Lake * Intel Raptor Lake [keep PCI ID for Alder Lake PCH for recently added quirk -Mathias] Cc: stable@vger.kernel.org Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-4-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25xhci: Add quirk to reset host back to default state at shutdownMathias Nyman
Systems based on Alder Lake P see significant boot time delay if boot firmware tries to control usb ports in unexpected link states. This is seen with self-powered usb devices that survive in U3 link suspended state over S5. A more generic solution to power off ports at shutdown was attempted in commit 83810f84ecf1 ("xhci: turn off port power in shutdown") but it caused regression. Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and ports back to default state in shutdown. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controllerJens Glathe
This appears to fix the error: "xhci_hcd <address>; ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13" that appear spuriously (or pretty often) when using a r8152 USB3 ethernet adapter with integrated hub. ASM1042 reports as a 0.96 controller, but appears to behave more like 1.0 Inspired by this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3 Cc: stable@vger.kernel.org Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-2-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25misc: sgi-gru: use explicitly signed charJason A. Donenfeld
With char becoming unsigned by default, and with `char` alone being ambiguous and based on architecture, signed chars need to be marked explicitly as such. This fixes warnings like: drivers/misc/sgi-gru/grumain.c:711 gru_check_chiplet_assignment() warn: 'gts->ts_user_chiplet_id' is unsigned Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20221025025223.573543-1-Jason@zx2c4.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25Merge tag 'counter-fixes-for-6.1a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus William writes: "First set of Counter fixes for 6.1 cycle Typical driver fixes for races and bugs. This also includes a sparse warning fix for the recently introduced counter_array API: the macro DEFINE_COUNTER_ARRAY_POLARITY() is reduced to a simple structure definition rather than multiple data structure definitions. - 104-quad-8 * Fix race getting function mode and direction - microchip-tcb-capture * Handle Signal1 read and Synapse - ti-ecap-capture * fix IS_ERR() vs NULL check - counter * Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array" * tag 'counter-fixes-for-6.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: 104-quad-8: Fix race getting function mode and direction counter: microchip-tcb-capture: Handle Signal1 read and Synapse counter: ti-ecap-capture: fix IS_ERR() vs NULL check counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
2022-10-25coresight: cti: Fix hang in cti_disable_hw()James Clark
cti_enable_hw() and cti_disable_hw() are called from an atomic context so shouldn't use runtime PM because it can result in a sleep when communicating with firmware. Since commit 3c6656337852 ("Revert "firmware: arm_scmi: Add clock management to the SCMI power domain""), this causes a hang on Juno when running the Perf Coresight tests or running this command: perf record -e cs_etm//u -- ls This was also missed until the revert commit because pm_runtime_put() was called with the wrong device until commit 692c9a499b28 ("coresight: cti: Correct the parameter for pm_runtime_put") With lock and scheduler debugging enabled the following is output: coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948 softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022 Call trace: dump_backtrace+0x134/0x140 show_stack+0x20/0x58 dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 __might_resched+0x180/0x228 __might_sleep+0x50/0x88 __pm_runtime_resume+0xac/0xb0 cti_enable+0x44/0x120 coresight_control_assoc_ectdev+0xc0/0x150 coresight_enable_path+0xb4/0x288 etm_event_start+0x138/0x170 etm_event_add+0x48/0x70 event_sched_in.isra.122+0xb4/0x280 merge_sched_in+0x1fc/0x3d0 visit_groups_merge.constprop.137+0x16c/0x4b0 ctx_sched_in+0x114/0x1f0 perf_event_sched_in+0x60/0x90 ctx_resched+0x68/0xb0 perf_event_exec+0x138/0x508 begin_new_exec+0x52c/0xd40 load_elf_binary+0x6b8/0x17d0 bprm_execve+0x360/0x7f8 do_execveat_common.isra.47+0x218/0x238 __arm64_sys_execve+0x48/0x60 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.4+0xfc/0x120 do_el0_svc+0x34/0xc0 el0_svc+0x40/0x98 el0t_64_sync_handler+0x98/0xc0 el0t_64_sync+0x170/0x174 Fix the issue by removing the runtime PM calls completely. They are not needed here because it must have already been done when building the path for a trace. Fixes: 835d722ba10a ("coresight: cti: Initial CoreSight CTI Driver") Cc: stable <stable@kernel.org> Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com> Reported-by: Cristian Marussi <Cristian.Marussi@arm.com> Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: James Clark <james.clark@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Tested-by: Mike Leach <mike.leach@linaro.org> [ Fix build warnings ] Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20221025131032.1149459-1-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25usb: dwc3: st: Rely on child's compatible instead of namePatrice Chotard
To ensure that child node is found, don't rely on child's node name which can take different value, but on child's compatible name. Fixes: f5c5936d6b4d ("usb: dwc3: st: Fix node's child name") Cc: stable <stable@kernel.org> Cc: Jerome Audu <jerome.audu@st.com> Reported-by: Felipe Balbi <felipe@balbi.sh> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20220930142018.890535-1-patrice.chotard@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25usb: gadget: uvc: limit isoc_sg to super speed gadgetsMichael Grzeschik
The overhead of preparing sg data is high for transfers with limited payload. When transferring isoc over high-speed usb the maximum payload is rather small which is a good argument no to use sg. This patch is changing the uvc_video_encode_isoc_sg encode function only to be used for super speed gadgets. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20221017221141.3134818-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-25pm-graph v5.10Todd Brandt
sleepgraph: - add -wifitrace argument for tracing all the way to wifi reconnect - include more data in ftrace to mark the end of kernel resume - add async_synchronize_full to the list of funcs to chart - add thermal zone info to the log data - include a check for s0ix support (s2idle is the default mem_sleep) - if s2idle does not support s0ix, remove the SYS%LPI turbostat var - fix -dev crash when kprobe caller is just an address (not a symbol) - fix the cpuexec data in -proc to display in resume sleepgraph.8: - add -wifitrace documentation README: - change links from 01.org to developer.intel.com Signed-off-by: Todd Brandt <todd.e.brandt@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-25media: vivid.rst: loop_video is set on the capture devnodeHans Verkuil
The example on how to use and test Capture Overlay specified the wrong video device node. Back in 2015 the loop_video control moved from the output device to the capture device, but this example code is still referring to the output video device. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: set num_in/outputs to 0 if not supportedHans Verkuil
If node_types does not have video/vbi/meta inputs or outputs, then set num_inputs/num_outputs to 0 instead of 1. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 0c90f649d2f5 (media: vivid: add vivid_create_queue() helper) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: drop GFP_DMA32Hans Verkuil
>From what I can see, this is not needed. And since using it issues a 'deprecated' warning, just drop it. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: fix control handler mutex deadlockHans Verkuil
vivid_update_format_cap() can be called from an s_ctrl callback. In that case (keep_controls == true) no control framework functions can be called that take the control handler mutex. The new call to v4l2_ctrl_modify_dimensions() did exactly that. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 6bc7643d1b9c (media: vivid: add pixel_array test control) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'Hans Verkuil
If it is a progressive (non-interlaced) format, then ignore the interlaced timing values. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 7f68127fa11f ([media] videodev2.h: defines to calculate blanking and frame sizes) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: v4l2-dv-timings: add sanity checks for blanking valuesHans Verkuil
Add sanity checks to v4l2_valid_dv_timings() to ensure that the provided blanking values are reasonable. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: b18787ed1ce3 ([media] v4l2-dv-timings: add new helper module) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: dev->bitmap_cap wasn't freed in all casesHans Verkuil
Whenever the compose width/height values change, the dev->bitmap_cap vmalloc'ed array must be freed and dev->bitmap_cap set to NULL. This was done in some places, but not all. This is only an issue if overlay support is enabled and the bitmap clipping is used. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: s_fbuf: add more sanity checksHans Verkuil
VIDIOC_S_FBUF is by definition a scary ioctl, which is why only root can use it. But at least check if the framebuffer parameters match that of one of the framebuffer created by vivid, and reject anything else. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25nvme-multipath: set queue dma alignment to 3Keith Busch
NVMe spec requires all transports support dword aligned addresses, which is already set in the namespace request_queue. Set the same limit in the multipath device's request_queue as well. Signed-off-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-25nvme-tcp: fix possible circular locking when deleting a controller under ↵Sagi Grimberg
memory pressure When destroying a queue, when calling sock_release, the network stack might need to allocate an skb to send a FIN/RST. When that happens during memory pressure, there is a need to reclaim memory, which in turn may ask the nvme-tcp device to write out dirty pages, however this is not possible due to a ctrl teardown that is going on. Set PF_MEMALLOC to the task that releases the socket to grant access to PF_MEMALLOC reserves. In addition, do the same for the nvme-tcp thread as this may also originate from the swap itself and should be more resilient to memory pressure situations. This fixes the following lockdep complaint: -- ====================================================== WARNING: possible circular locking dependency detected 6.0.0-rc2+ #25 Tainted: G W ------------------------------------------------------ kswapd0/92 is trying to acquire lock: ffff888114003240 (sk_lock-AF_INET-NVME){+.+.}-{0:0}, at: tcp_sendpage+0x23/0xa0 but task is already holding lock: ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x11e/0x160 kmem_cache_alloc_node+0x44/0x530 __alloc_skb+0x158/0x230 tcp_send_active_reset+0x7e/0x730 tcp_disconnect+0x1272/0x1ae0 __tcp_close+0x707/0xd90 tcp_close+0x26/0x80 inet_release+0xfa/0x220 sock_release+0x85/0x1a0 nvme_tcp_free_queue+0x1fd/0x470 [nvme_tcp] nvme_do_delete_ctrl+0x130/0x13d [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write_iter+0x356/0x530 vfs_write+0x4e8/0xce0 ksys_write+0xfd/0x1d0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #0 (sk_lock-AF_INET-NVME){+.+.}-{0:0}: __lock_acquire+0x2a0c/0x5690 lock_acquire+0x18e/0x4f0 lock_sock_nested+0x37/0xc0 tcp_sendpage+0x23/0xa0 inet_sendpage+0xad/0x120 kernel_sendpage+0x156/0x440 nvme_tcp_try_send+0x48a/0x2630 [nvme_tcp] nvme_tcp_queue_rq+0xefb/0x17e0 [nvme_tcp] __blk_mq_try_issue_directly+0x452/0x660 blk_mq_plug_issue_direct.constprop.0+0x207/0x700 blk_mq_flush_plug_list+0x6f5/0xc70 __blk_flush_plug+0x264/0x410 blk_finish_plug+0x4b/0xa0 shrink_lruvec+0x1263/0x1ea0 shrink_node+0x736/0x1a80 balance_pgdat+0x740/0x10d0 kswapd+0x5f2/0xaf0 kthread+0x256/0x2f0 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sk_lock-AF_INET-NVME); lock(fs_reclaim); lock(sk_lock-AF_INET-NVME); *** DEADLOCK *** 3 locks held by kswapd0/92: #0: ffffffff97e95ca0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x987/0x10d0 #1: ffff88811f21b0b0 (q->srcu){....}-{0:0}, at: blk_mq_flush_plug_list+0x6b3/0xc70 #2: ffff888170b11470 (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0xeb9/0x17e0 [nvme_tcp] Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-25nvme-tcp: replace sg_init_marker() with sg_init_table()Nam Cao
In nvme_tcp_ddgst_update(), sg_init_marker() is called with an uninitialized scatterlist. This is probably fine, but gcc complains: CC [M] drivers/nvme/host/tcp.o In file included from ./include/linux/dma-mapping.h:10, from ./include/linux/skbuff.h:31, from ./include/net/net_namespace.h:43, from ./include/linux/netdevice.h:38, from ./include/net/sock.h:46, from drivers/nvme/host/tcp.c:12: In function ‘sg_mark_end’, inlined from ‘sg_init_marker’ at ./include/linux/scatterlist.h:356:2, inlined from ‘nvme_tcp_ddgst_update’ at drivers/nvme/host/tcp.c:390:2: ./include/linux/scatterlist.h:234:11: error: ‘sg.page_link’ is used uninitialized [-Werror=uninitialized] 234 | sg->page_link |= SG_END; | ~~^~~~~~~~~~~ drivers/nvme/host/tcp.c: In function ‘nvme_tcp_ddgst_update’: drivers/nvme/host/tcp.c:388:28: note: ‘sg’ declared here 388 | struct scatterlist sg; | ^~ cc1: all warnings being treated as errors Use sg_init_table() instead, which basically memset the scatterlist to zero first before calling sg_init_marker(). Signed-off-by: Nam Cao <namcaov@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-10-25ALSA: rme9652: use explicitly signed charJason A. Donenfeld
With char becoming unsigned by default, and with `char` alone being ambiguous and based on architecture, signed chars need to be marked explicitly as such. This fixes warnings like: sound/pci/rme9652/hdsp.c:3953 hdsp_channel_buffer_location() warn: 'hdsp->channel_map[channel]' is unsigned sound/pci/rme9652/hdsp.c:4153 snd_hdsp_channel_info() warn: impossible condition '(hdsp->channel_map[channel] < 0) => (0-255 < 0)' sound/pci/rme9652/rme9652.c:1833 rme9652_channel_buffer_location() warn: 'rme9652->channel_map[channel]' is unsigned Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221025000313.546261-1-Jason@zx2c4.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-10-25ALSA: au88x0: use explicitly signed charJason A. Donenfeld
With char becoming unsigned by default, and with `char` alone being ambiguous and based on architecture, signed chars need to be marked explicitly as such. This fixes warnings like: sound/pci/au88x0/au88x0_core.c:2029 vortex_adb_checkinout() warn: signedness bug returning '(-22)' sound/pci/au88x0/au88x0_core.c:2046 vortex_adb_checkinout() warn: signedness bug returning '(-12)' sound/pci/au88x0/au88x0_core.c:2125 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, (0), en, 0)' is unsigned sound/pci/au88x0/au88x0_core.c:2170 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, stream->resources, en, 4)' is unsigned As well, since one function returns errnos, return an `int` rather than a `signed char`. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221024162929.536004-1-Jason@zx2c4.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-10-25cpufreq: intel_pstate: hybrid: Use known scaling factor for P-coresRafael J. Wysocki
Commit 46573fd6369f ("cpufreq: intel_pstate: hybrid: Rework HWP calibration") attempted to use the information from CPPC (the nominal performance in particular) to obtain the scaling factor allowing the frequency to be computed if the HWP performance level of the given CPU is known or vice versa. However, it turns out that on some platforms this doesn't work, because the CPPC information on them does not align with the contents of the MSR_HWP_CAPABILITIES registers. This basically means that the only way to make intel_pstate work on all of the hybrid platforms to date is to use the observation that on all of them the scaling factor between the HWP performance levels and frequency for P-cores is 78741 (approximately 100000/1.27). For E-cores it is 100000, which is the same as for all of the non-hybrid "core" platforms and does not require any changes. Accordingly, make intel_pstate use 78741 as the scaling factor between HWP performance levels and frequency for P-cores on all hybrid platforms and drop the dependency of the HWP calibration code on CPPC. Fixes: 46573fd6369f ("cpufreq: intel_pstate: hybrid: Rework HWP calibration") Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 5.15+ <stable@vger.kernel.org> # 5.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 13:37:26 +0000