Age | Commit message (Collapse) | Author |
|
dbg_flags looks to be defined with incorrect data type; to process
multiple debug flag options, and hence defined dbg_flags as u32.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_packet_manager_v9.c:117 pm_map_process_aldebaran() warn: maybe use && instead of &
Fixes: 0de4ec9a0353 ("drm/amdgpu: prepare map process for multi-process debug devices")
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_ras_query_error_status_helper()
Return invalid error code -EINVAL for invalid block id.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1183 amdgpu_ras_query_error_status_helper() error: we previously assumed 'info' could be null (see line 1176)
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'amdgpu_gfx_rlc_init_microcode()'
unsigned int "version_minor" is always >= 0
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_rlc.c:534 amdgpu_gfx_rlc_init_microcode() warn: always true condition '(version_minor >= 0) => (0-u16max >= 0)'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'dcn35_hw_block_power_up'
Fixes the following gcc with W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn35/dcn35_hwseq.c:1124: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Charlene Liu <charlene.liu@amd.com>
Cc: Muhammad Ahmed <ahmed.ahmed@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Srinath Rao <srinath.rao@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'dc_state_rem_all_planes_for_stream' & 'populate_subvp_cmd_drr_info'
Fixes the following gcc with W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c:524: warning: Function parameter or member 'state' not described in 'dc_state_rem_all_planes_for_stream'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_state.c:524: warning: Excess function parameter 'context' description in 'dc_state_rem_all_planes_for_stream'
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:540: warning: Function parameter or member 'context' not described in 'populate_subvp_cmd_drr_info'
Suggested-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Dillon Varone <dillon.varone@amd.com>
Cc: Jun Lei <jun.lei@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Srinath Rao <srinath.rao@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
kvmalloc_array + __GFP_ZERO is the same with kvcalloc.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c:873 amdgpu_cs_parser_bos() warn: Please consider using kvcalloc instead of kvmalloc_array
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes the below smatch warnings:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2543 amdgpu_ras_recovery_init() warn: Please consider using kzalloc instead of kmalloc
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2830 amdgpu_ras_init() warn: Please consider using kzalloc instead of kmalloc
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c:1106 amdgpu_connector_dvi_detect() warn: inconsistent indenting
Fixes: 8a1de314d189 ("drm/amdgpu: Refactor 'amdgpu_connector_dvi_detect' in amdgpu_connectors.c")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use gpu_metrics_v1_5 for SMUv13.0.6 to fill
gpu metric info
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new gpu_metrics_v1_5 to acquire vcn/jpeg activity
& pcie nak error counters
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update pmfw metric table to include vcn & jpeg
activity for smu_v_13_0_6
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use separate metric table for APU and Non APU
systems for smu_v_13_0_6 to get metric data
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Prepare for enabling the Panel Replay feature
[HOW]
- Add some Panel Replay setting functions in DC
- Add the Panel Replay resource in dcn35_resource.c
- Add debug masks for Panel Replay
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 44e60b14d5a72f91fd0bdeae8da59ae37a3ca8e5.
Since, it causes a regression in which eDP displays with PSR support,
but no Replay support (Sink support <= 0x03), fail to enable PSR and
consequently all IGT amd_psr tests fail. So, revert this until a more
suitable fix can be found.
This got brought back accidently with the backmerge.
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For certain dual display configs that had one display using a 1080p
mode, the DPM level used to drive the configs regressed from DPM 0 to
DPM 3. This was caused by a missing check that should have only limited
the pipe segments on non-phantom pipes. This caused issues with detile
buffer allocation, which dissallow subvp from being used
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
A hang was observed where a read-modify-write access occurred due to the
register for idle state being shared between DMCUB and driver.
dmcub read - idle allow / no commit
driver read - idle allow / no commit
driver write - idle disallow / no commit
dmcub write - idle allow / commit
Resulting in DMCUB re-entering IPS after a disable and keeping the allow
high.
[How]
Long term we need to split commit/allow into two registers or use shared
DRAM state, but short term we can reduce the repro rate by ensuring that
the disallow went through by bounding the expected worst case scenario.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Failing mode validation during dc_commit, leading to blackscreen with an
8k DP2 display during mode change.
[What]
Fix mixmatch between pipe and stream, which prevented us from
recognizing the link as DP2.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
Move all init files to hwss folder.
[how]
moved the dcnxx_init.c and .h files into inside the hwss and cleared the
linkage errors.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Revalla <hrevalla@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For FPO and SubVP/DRR cases we need to ensure to program
OTG_V_TOTAL_MIN/MAX_SEL, otherwise stretching the vblank in FPO / SubVP
/ DRR cases will not have any effect and we could hit underflow /
corruption.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If bandwidth allocation feature is enabled, connection manager wont
limit the dp tunnel bandwidth. So, need to do display mode validation
for streams on dpia links to avoid oversubscription of dp tunnel
bandwidth.
[How]
- To read non reduced link rate and lane count and update
reported link capability.
- To calculate the bandwidth required for streams of dpia links
per host router and validate against the allocated bandwidth for
the host router.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Race condition between notification of driver idle and the command being
processed. We could theoretically enter idle between the submission and
the wait for idle that occurs after.
[How]
Switch the notification to NO_WAIT to avoid the RPTR access.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It's required to take the gfx mutex before access to CP_VMID_RESET,
for there is a race condition with CP firmware to write the register.
v2: add extra code to ensure the mutex releasing is successful.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If we time out waiting for PMFW to finish the exit sequence and touch
the DMCUB register the system will hang in a hard locked state.
[How]
Pol forever. This covers the case where things take too long but also
enables for debugging to occur since the cores won't be hardlocked.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
dc->idle_optimizations_allowed may be desynced with the hardware state.
[How]
Make sure we always exit out when dc_dmub_srv_exit_low_power_state is
called by removing the check.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Some debug tools, sometimes wrap around to multiple lines which causes
issues with the DPM test script while it is looking for the logs. Need a
way to tell when the log is finished.
[How]
Added "LOG_END" to the end of the log.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A new check was added to ensure FPO is not enabled when the FPO pipe has
0 planes. This requires the stream status to check the plane count, but
the stream status was not assigned for FPO + Vactive cases which leads
to FPO not be enabled always.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Relja Vojvodic <relja.vojvodic@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Change the rules for amdgpu_sync_resv to let KFD synchronize with VM
fences on page table reservations. This fixes intermittent memory
corruption after evictions when using amdgpu_vm_handle_moved to update
page tables for VM mappings managed through render nodes.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
link_rate sometime will be changed when DP MST connector hotplug, so
pbn_div also need be updated; otherwise, it will mismatch with
link_rate, causes no output in external monitor.
Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Wade Wang <wade.wang@hp.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
BL1_PWM_USER_LEVEL is meant for the user brightness level setting from
OS. However, we update it along with other ABM levels to the real PWM
value which could be ABMed.
[How]
Driver to cache and restore the user brightness level setting so that
DMUB can retrieve the last user setting in ABM config initialization.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Camille Cho <camille.cho@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Fix minor issues in BW Allocation Phase2.
[How]
- In set_usb4_req_bw_req(), link->dpia_bw_alloc_config.response_ready
flag should be reset before writing DPCD REQUEST_BW.
- Fix the granularity for value of 2 in get_bw_granularity().
- Removed bandwidth allocation support display fw boot option as
the fw would read feature enable status from bios.
- Clean up DPIA_EST_BW_CHANGED and DPIA_BW_REQ_SUCCESS cases in
dpia_handle_bw_alloc_response().
- Removed allocate_usb4_bw and deallocate_usb4_bw.
- Optimized loop in get_lowest_dpia_index().
- Updated link_dp_dpia_allocate_usb4_bandwidth_for_stream() and
set_usb4_req_bw_req() to always issue request bw.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Some functions whose output is typically checked for null are not being
checked for null at several call sites, causing some static analysis
tools to throw an error.
[How]
Add null pointer guards around functions that typically have them at
other call sites.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Josip Pavic <josip.pavic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Certain HDMI modes failed at dml cap check for uncompressed video but
they can still be supported for compressed video.
[How]
Add HDMI capacity computations using fixed31_32 in dc side.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
More information is desired for the test tools.
[How]
Refactored get_subvp_visual_confirm_color and
get_mclk_switch_visual_confirm_color to support the new method of
storing the p_state type, which was changed so that it could also be
saved and output by the DPM log. Ensured that the p_state type is kept
updated by looping through the pipes within commit_planes_for_stream.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Relja Vojvodic <relja.vojvodic@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In DCN32/321 FPO uses per-pipe P-State force. If there is no plane, then
then HUBP is power gated, in which case any programming in HUBP has no
effect and the pipe is always asserting P-State allow. This is contrary
to what we want to happen for FPO (FW should moderate the P-State
assertion), so block FPO if there's no plane for the FPO pipe.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
There is some logic error where the wrong variable was used to check for
OTG_MASTER and DPP_PIPE.
[How]
Add booleans to confirm that the expected pipes were found before
validating schedulability.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The ecc_irq is disabled while GPU mode2 reset suspending process,
but not be enabled during GPU mode2 reset resume process.
Changed from V1:
only do sdma/gfx ras_late_init in aldebaran_mode2_restore_ip
delete amdgpu_ras_late_resume function
Changed from V2:
check umc ras supported before put ecc_irq
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Idle power optimization was disabled on dcn35 by default.
[How]
Enable by setting disable_idle_power_optimizations to false.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Instability is observed on DCN35 if idle power optimization is enabled.
[How]
Disable IPS until issue is resolved.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
SMN address is larger than 32 bits for registers on different AID's
Updating existing interface to support access to such registers.
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Variable remainder is being initialized with a value that is never read,
the assignment is redundant and can be removed. Also add a newline
after the declaration to clean up the coding style.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
- Fix couple unfined behavior cases to calm UBSAN and clang (Matt Brost, Lucas)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZYsbDPBLUiqDevLt@intel.com
|
|
Correct all kernel-doc notation on pvr_device.h so that there are no
kernel-doc warnings remaining.
pvr_device.h:292: warning: Excess struct member 'active' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'idle' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'work' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'old_kccb_cmds_executed' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'kccb_stall_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'ccb' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_q' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_obj' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'slot_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'reserved_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'waiters' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'fence_ctx' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'id' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'seqno' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'active' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'idle' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'work' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'old_kccb_cmds_executed' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'kccb_stall_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'ccb' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_q' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn_obj' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'rtn' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'slot_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'reserved_count' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'waiters' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'fence_ctx' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'id' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'seqno' description in 'pvr_device'
pvr_device.h:292: warning: Excess struct member 'lock' description in 'pvr_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Frank Binns <frank.binns@imgtec.com>
Cc: Donald Robson <donald.robson@imgtec.com>
Cc: Matt Coster <matt.coster@imgtec.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231054910.31805-1-rdunlap@infradead.org
|
|
Update kernel-doc comments in <drm/drm_gpuvm.h> to correct all
kernel-doc warnings:
drm_gpuvm.h:148: warning: Excess struct member 'addr' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member 'offset' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member 'obj' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member 'entry' description in 'drm_gpuva'
drm_gpuvm.h:148: warning: Excess struct member '__subtree_last' description in 'drm_gpuva'
drm_gpuvm.h:192: warning: No description found for return value of 'drm_gpuva_invalidated'
drm_gpuvm.h:331: warning: Excess struct member 'tree' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'local_list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'lock' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'local_list' description in 'drm_gpuvm'
drm_gpuvm.h:331: warning: Excess struct member 'lock' description in 'drm_gpuvm'
drm_gpuvm.h:352: warning: No description found for return value of 'drm_gpuvm_get'
drm_gpuvm.h:545: warning: Excess struct member 'fn' description in 'drm_gpuvm_exec'
drm_gpuvm.h:545: warning: Excess struct member 'priv' description in 'drm_gpuvm_exec'
drm_gpuvm.h:597: warning: missing initial short description on line:
* drm_gpuvm_exec_resv_add_fence()
drm_gpuvm.h:616: warning: missing initial short description on line:
* drm_gpuvm_exec_validate()
drm_gpuvm.h:623: warning: No description found for return value of 'drm_gpuvm_exec_validate'
drm_gpuvm.h:698: warning: Excess struct member 'gpuva' description in 'drm_gpuvm_bo'
drm_gpuvm.h:698: warning: Excess struct member 'entry' description in 'drm_gpuvm_bo'
drm_gpuvm.h:698: warning: Excess struct member 'gem' description in 'drm_gpuvm_bo'
drm_gpuvm.h:698: warning: Excess struct member 'evict' description in 'drm_gpuvm_bo'
drm_gpuvm.h:726: warning: No description found for return value of 'drm_gpuvm_bo_get'
drm_gpuvm.h:738: warning: missing initial short description on line:
* drm_gpuvm_bo_gem_evict()
drm_gpuvm.h:740: warning: missing initial short description on line:
* drm_gpuvm_bo_gem_evict()
drm_gpuvm.h:698: warning: Excess struct member 'evict' description in 'drm_gpuvm_bo'
drm_gpuvm.h:844: warning: Excess struct member 'addr' description in 'drm_gpuva_op_map'
drm_gpuvm.h:844: warning: Excess struct member 'range' description in 'drm_gpuva_op_map'
drm_gpuvm.h:844: warning: Excess struct member 'offset' description in 'drm_gpuva_op_map'
drm_gpuvm.h:844: warning: Excess struct member 'obj' description in 'drm_gpuva_op_map'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231231054856.31786-1-rdunlap@infradead.org
|
|
Having a different value for op is not possible: this is already kept
out of user-visible warning by the check in xe_wait_user_fence_ioctl()
if op > MAX_OP. The warning is useful as if this switch() is not update
when a new op is added, it should be triggered.
Fix warning as reported by 0-DAY CI Kernel:
drivers/gpu/drm/xe/xe_wait_user_fence.c:46:2: warning: variable 'passed' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized]
Closes: https://lore.kernel.org/oe-kbuild-all/202312170357.KPSinwPs-lkp@intel.com/
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20231218163301.3453285-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
add_preempt_fences() calls dma_resv_reserve_fences() with num_fences ==
0 resulting in the below UBSAN splat. Short circuit add_preempt_fences()
if num_fences == 0.
[ 58.652241] ================================================================================
[ 58.660736] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
[ 58.667281] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[ 58.674539] CPU: 2 PID: 1170 Comm: xe_gpgpu_fill Not tainted 6.6.0-rc3-guc+ #630
[ 58.674545] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.3243.A01.2006102133 06/10/2020
[ 58.674547] Call Trace:
[ 58.674548] <TASK>
[ 58.674550] dump_stack_lvl+0x92/0xb0
[ 58.674555] __ubsan_handle_shift_out_of_bounds+0x15a/0x300
[ 58.674559] ? rcu_is_watching+0x12/0x60
[ 58.674564] ? software_resume+0x141/0x210
[ 58.674575] ? new_vma+0x44b/0x600 [xe]
[ 58.674606] dma_resv_reserve_fences.cold+0x40/0x66
[ 58.674612] new_vma+0x4b3/0x600 [xe]
[ 58.674638] xe_vm_bind_ioctl+0xffd/0x1e00 [xe]
[ 58.674663] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 58.674680] drm_ioctl_kernel+0xc1/0x170
[ 58.674686] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 58.674703] drm_ioctl+0x247/0x4c0
[ 58.674709] ? find_held_lock+0x2b/0x80
[ 58.674716] __x64_sys_ioctl+0x8c/0xb0
[ 58.674720] do_syscall_64+0x3c/0x90
[ 58.674723] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 58.674727] RIP: 0033:0x7fce4bd1aaff
[ 58.674730] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[ 58.674731] RSP: 002b:00007ffc57434050 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 58.674734] RAX: ffffffffffffffda RBX: 00007ffc574340e0 RCX: 00007fce4bd1aaff
[ 58.674736] RDX: 00007ffc574340e0 RSI: 0000000040886445 RDI: 0000000000000003
[ 58.674737] RBP: 0000000040886445 R08: 0000000000000002 R09: 00007ffc574341b0
[ 58.674739] R10: 000055de43eb3780 R11: 0000000000000246 R12: 00007ffc574340e0
[ 58.674740] R13: 0000000000000003 R14: 00007ffc574341b0 R15: 0000000000000001
[ 58.674747] </TASK>
[ 58.674748] ================================================================================
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20231215230203.719244-1-matthew.brost@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
No functional modification involved.
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c:1708 rk3588_calc_cru_cfg() warn: inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7778
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219062635.100718-1-jiapeng.chong@linux.alibaba.com
|
|
Marek Report a possible irq lock inversion dependency warning when
commit 81a06f1d02e5 ("Revert "drm/rockchip: vop2: Use regcache_sync()
to fix suspend/resume"") lands linux-next.
I can reproduce this warning with:
CONFIG_PROVE_LOCKING=y
CONFIG_DEBUG_LOCKDEP=y
It seems than when use regmap_reinit_cache at runtime whith Mark's
commit 3d59c22bbb8d ("drm/rockchip: vop2: Convert to use maple tree
register cache"), it will trigger a possible irq lock inversion dependency
warning.
One solution is switch back to REGCACHE_RBTREE, but it seems that
REGCACHE_MAPLE is the future, so I avoid using regmap_reinit_cache,
and drop all the regcache when vop is disabled, then we get a fresh
start at next enbable time.
Fixes: 81a06f1d02e5 ("Revert "drm/rockchip: vop2: Use regcache_sync() to fix suspend/resume"")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/98a9f15d-30ac-47bf-9b93-3aa2c9900f7b@samsung.com/
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
[dropped the large kernel log of the lockdep report from the message]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231217084415.2373043-1-andyshrk@163.com
|
|
Sprinkle some extra WARNs around so that we might catch
premature framebuffer destruction more readily.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211081625.25704-2-ville.syrjala@linux.intel.com
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
If we get a deadlock after the fb lookup in drm_mode_page_flip_ioctl()
we proceed to unref the fb and then retry the whole thing from the top.
But we forget to reset the fb pointer back to NULL, and so if we then
get another error during the retry, before the fb lookup, we proceed
the unref the same fb again without having gotten another reference.
The end result is that the fb will (eventually) end up being freed
while it's still in use.
Reset fb to NULL once we've unreffed it to avoid doing it again
until we've done another fb lookup.
This turned out to be pretty easy to hit on a DG2 when doing async
flips (and CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y). The first symptom I
saw that drm_closefb() simply got stuck in a busy loop while walking
the framebuffer list. Fortunately I was able to convince it to oops
instead, and from there it was easier to track down the culprit.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231211081625.25704-1-ville.syrjala@linux.intel.com
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver changes for v6.8.
The notable changes are:
- uAPI changes:
- Add sysfs entry to allow users to identify a device minor id with its
debugfs path
- Add sysfs entry to expose the device's module id as given to us from
the f/w
- Add signed device information retrieval through the INFO ioctl
- New features and improvements:
- Update documentation of debugfs paths
- Add support for Gaudi2C device (new PCI revision number)
- Add pcie reset prepare/done hooks
- Firmware related fixes and changes:
- Print three instances version numbers of Infineon second stage
- Assume hard-reset is done by f/w upon PCIe AXI drain
- Bug fixes and code cleanups:
- Fix information leak in sec_attest_info()
- Avoid overriding existing undefined opcode data in Gaudi2
- Multiple Queue Manager (QMAN) fixes for Gaudi2
- Set hard reset flag if graceful reset is skipped
- Remove 'get temperature' debug print
- Fix the new Event Queue heartbeat mechanism
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZYFpihZscr/fsRRd@ogabbay-vm-u22.habana-labs.com
|