| Age | Commit message (Collapse) | Author |
|---|
|
By default, X86(-64) systems use the emergecy restart routine
in the course of which the code unconditionally writes to
the physical address of 0x472 to indicate the boot mode
to the firmware (BIOS or UEFI).
When the kernel itself runs as a firmware in the VTL mode,
that write corrupts the memory of the guest upon emergency
restarting. Preserving the state intact in that situation
is important for debugging, at least.
Define the specialized machine callback to avoid that write
and use the triple fault to perform emergency restart.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227214728.15672-2-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250227214728.15672-2-romank@linux.microsoft.com>
|
|
The union vmpacket_largest_possible_header and several structs have not
been used for a long time afaict - remove them.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250311091634.494888-2-thorsten.blum@linux.dev
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250311091634.494888-2-thorsten.blum@linux.dev>
|
|
CONFIG_MSHV_ROOT allows kernels built to run as a normal Hyper-V guest
to exclude the root partition code, which is expected to grow
significantly over time.
This option is a tristate so future driver code can be built as a
(m)odule, allowing faster development iteration cycles.
If CONFIG_MSHV_ROOT is disabled, don't compile hv_proc.c, and stub
hv_root_partition() to return false unconditionally. This allows the
compiler to optimize away root partition code blocks since they will
be disabled at compile time.
In the case of booting as root partition *without* CONFIG_MSHV_ROOT
enabled, print a critical error (the kernel will likely crash).
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1740167795-13296-4-git-send-email-nunodasneves@linux.microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"A final set of fixes for this cycle:
VFS:
- Ensure that the stable offset api doesn't return duplicate
directory entries when userspace has to perform the getdents call
multiple times on large directories
afs:
- Prevent invalid pointer dereference during get_link RCU pathwalk
fuse:
- Fix deadlock caused by uninitialized rings when using io_uring with
fuse
- Handle race condition when using io_uring with fuse to prevent NULL
dereference
libnetfs:
- Ensure that invalidate_cache is only called if implemented
- Fix collection of results during pause when collection is
offloaded
- Ensure rolling_buffer_load_from_ra() doesn't clear mark bits
- Make netfs_unbuffered_read() return ssize_t rather than int"
* tag 'vfs-6.14-final.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
libfs: Fix duplicate directory entry in offset_dir_lookup
fuse: fix possible deadlock if rings are never initialized
netfs: Fix netfs_unbuffered_read() to return ssize_t rather than int
netfs: Fix rolling_buffer_load_from_ra() to not clear mark bits
netfs: Call `invalidate_cache` only if implemented
netfs: Fix collection of results during pause when collection offloaded
fuse: fix uring race condition for null dereference of fc
afs: Fix afs_atcell_get_link() to check if ws_cell is unset first
|
|
If init_rapl_pmu() fails while allocating memory for "rapl_pmu" objects,
we miss freeing the "rapl_pmus" object in the error path. Fix that.
Fixes: 9b99d65c0bb4 ("perf/x86/rapl: Move the pmu allocation out of CPU hotplug")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250320100617.4480-1-dhananjay.ugwekar@amd.com
|
|
Pull kvm fix from Paolo Bonzini:
"A lone fix for a s390 regression. An earlier 6.14 commit stopped
taking the pte lock for pages that are being converted to secure, but
it was needed to avoid races.
The patch was in development for a while and is finally ready, but I
wish it was split into 3-4 commits at least"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: pv: fix race when making a page secure
|
|
io_req_msg_cleanup() relies on the fact that io_netmsg_recycle() will
always fully recycle, but that may not be the case if the msg cache
was already full. To ensure that normal cleanup always gets run,
let io_netmsg_recycle() deal with clearing the relevant cleanup flags,
as it knows exactly when that should be done.
Cc: stable@vger.kernel.org
Reported-by: David Wei <dw@davidwei.uk>
Fixes: 75191341785e ("io_uring/net: add iovec recycling")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not make
sense to use the capability if the relevant registers are not
available for reading or writing.
|
|
The immediate issue being fixed here is a nVMX bug where KVM fails to
detect that, after nested VM-Exit, L1 has a pending IRQ (or NMI).
However, checking for a pending interrupt accesses the legacy PIC, and
x86's kvm_arch_destroy_vm() currently frees the PIC before destroying
vCPUs, i.e. checking for IRQs during the forced nested VM-Exit results
in a NULL pointer deref; that's a prerequisite for the nVMX fix.
The remaining patches attempt to bring a bit of sanity to x86's VM
teardown code, which has accumulated a lot of cruft over the years. E.g.
KVM currently unloads each vCPU's MMUs in a separate operation from
destroying vCPUs, all because when guest SMP support was added, KVM had a
kludgy MMU teardown flow that broke when a VM had more than one 1 vCPU.
And that oddity lived on, for 18 years...
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The `struct ttm_resource->placement` contains TTM_PL_FLAG_* flags, but
it was incorrectly tested for XE_PL_* flags.
This caused xe_dma_buf_pin() to always fail when invoked for
the second time. Fix this by checking the `mem_type` field instead.
Fixes: 7764222d54b7 ("drm/xe: Disallow pinning dma-bufs in VRAM")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100353.2137964-1-jacek.lawrynowicz@linux.intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
(cherry picked from commit b96dabdba9b95f71ded50a1c094ee244408b2a8e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.15
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU implementations
where a VM may run, addressing a longstanding issue of guest CPU
errata awareness in big-little systems and cross-implementation VM
migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
|
|
KVM/riscv changes for 6.15
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
|
|
Now that the rstat lock is being re-acquired on every CPU iteration in
cgroup_rstat_flush_locked(), having the initially acquire the lock is
unnecessary and unclear.
Inline cgroup_rstat_flush_locked() into cgroup_rstat_flush() and move
the lock/unlock calls to the beginning and ending of the loop body to
make the critical section obvious.
cgroup_rstat_flush_hold/release() do not make much sense with the lock
being dropped and reacquired internally. Since it has no external
callers, remove it and explicitly acquire the lock in
cgroup_base_stat_cputime_show() instead.
This leaves the code with a single flushing function,
cgroup_rstat_flush().
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, bluetooth and ipsec.
This contains a last minute revert of a recent GRE patch, mostly to
allow me stating there are no known regressions outstanding.
Current release - regressions:
- revert "gre: Fix IPv6 link-local address generation."
- eth: ti: am65-cpsw: fix NAPI registration sequence
Previous releases - regressions:
- ipv6: fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().
- mptcp: fix data stream corruption in the address announcement
- bluetooth: fix connection regression between LE and non-LE adapters
- can:
- flexcan: only change CAN state when link up in system PM
- ucan: fix out of bound read in strscpy() source
Previous releases - always broken:
- lwtunnel: fix reentry loops
- ipv6: fix TCP GSO segmentation with NAT
- xfrm: force software GSO only in tunnel mode
- eth: ti: icssg-prueth: add lock to stats
Misc:
- add Andrea Mayer as a maintainer of SRv6"
* tag 'net-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
MAINTAINERS: Add Andrea Mayer as a maintainer of SRv6
Revert "gre: Fix IPv6 link-local address generation."
Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."
net/neighbor: add missing policy for NDTPA_QUEUE_LENBYTES
tools headers: Sync uapi/asm-generic/socket.h with the kernel sources
mptcp: Fix data stream corruption in the address announcement
selftests: net: test for lwtunnel dst ref loops
net: ipv6: ioam6: fix lwtunnel_output() loop
net: lwtunnel: fix recursion loops
net: ti: icssg-prueth: Add lock to stats
net: atm: fix use after free in lec_send()
xsk: fix an integer overflow in xp_create_and_assign_umem()
net: stmmac: dwc-qos-eth: use devm_kzalloc() for AXI data
selftests: drv-net: use defer in the ping test
phy: fix xa_alloc_cyclic() error handling
dpll: fix xa_alloc_cyclic() error handling
devlink: fix xa_alloc_cyclic() error handling
ipv6: Set errno after ip_fib_metrics_init() in ip6_route_info_create().
ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().
net: ipv6: fix TCP GSO segmentation with NAT
...
|
|
Pull rdma fixes from Jason Gunthorpe:
"Collected driver fixes from the last few weeks, I was surprised how
significant many of them seemed to be.
- Fix rdma-core test failures due to wrong startup ordering in rxe
- Don't crash in bnxt_re if the FW supports more than 64k QPs
- Fix wrong QP table indexing math in bnxt_re
- Calculate the max SRQs for userspace properly in bnxt_re
- Don't try to do math on errno for mlx5's rate calculation
- Properly allow userspace to control the VLAN in the QP state during
INIT->RTR for bnxt_re
- 6 bug fixes for HNS:
- Soft lockup when processing huge MRs, add a cond_resched()
- Fix missed error unwind for doorbell allocation
- Prevent bad send queue parameters from userspace
- Wrong error unwind in qp creation
- Missed xa_destroy during driver shutdown
- Fix reporting to userspace of max_sge_rd, hns doesn't have a
read/write difference"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Fix wrong value of max_sge_rd
RDMA/hns: Fix missing xa_destroy()
RDMA/hns: Fix a missing rollback in error path of hns_roce_create_qp_common()
RDMA/hns: Fix invalid sq params not being blocked
RDMA/hns: Fix unmatched condition in error path of alloc_user_qp_db()
RDMA/hns: Fix soft lockup during bt pages loop
RDMA/bnxt_re: Avoid clearing VLAN_ID mask in modify qp path
RDMA/mlx5: Handle errors returned from mlx5r_ib_rate()
RDMA/bnxt_re: Fix reporting maximum SRQs on P7 chips
RDMA/bnxt_re: Add missing paranthesis in map_qp_id_to_tbl_indx
RDMA/bnxt_re: Fix allocation of QP table
RDMA/rxe: Fix the failure of ibv_query_device() and ibv_query_device_ex() tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- sdhci-brcmstb: Fix CQE suspend/resume support
- atmel-mci: Add a missing clk_disable_unprepare() in ->probe()
* tag 'mmc-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-brcmstb: add cqhci suspend/resume to PM ops
mmc: atmel-mci: Add missing clk_disable_unprepare()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Here's a final batch of EFI fixes for v6.14.
The efivarfs ones are fixes for changes that were made this cycle.
James's fix is somewhat of a band-aid, but it was blessed by the VFS
folks, who are working with James to come up with something better for
the next cycle.
- Avoid physical address 0x0 for random page allocations
- Add correct lockdep annotation when traversing efivarfs on resume
- Avoid NULL mount in kernel_file_open() when traversing efivarfs on
resume"
* tag 'efi-fixes-for-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: fix NULL dereference on resume
efivarfs: use I_MUTEX_CHILD nested lock to traverse variables on resume
efi/libstub: Avoid physical address 0x0 when doing random allocation
|
|
Merge series from Miquel Raynal <miquel.raynal@bootlin.com>:
While working with this controller I figured out a couple of small
issues which I propose to fix. They are not super impacting, but I
believe this goes into the right direction.
|
|
Restricted pointers ("%pK") are not meant to be used through printk().
It can unintentionally expose security sensitive, raw pointer values.
Use regular pointer formatting instead.
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250217-restricted-pointers-arm64-v1-1-14bb1f516b01@linutronix.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Andrea has made significant contributions to SRv6 support in Linux.
Acknowledge the work and on-going interest in Srv6 support with a
maintainers entry for these files so hopefully he is included
on patches going forward.
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250312092212.46299-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Guillaume Nault says:
====================
gre: Revert IPv6 link-local address fix.
Following Paolo's suggestion, let's revert the IPv6 link-local address
generation fix for GRE devices. The patch introduced regressions in the
upstream CI, which are still under investigation.
Start by reverting the kselftest that depend on that fix (patch 1), then
revert the kernel code itself (patch 2).
====================
Link: https://patch.msgid.link/cover.1742418408.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 183185a18ff96751db52a46ccf93fff3a1f42815.
This patch broke net/forwarding/ip6gre_custom_multipath_hash.sh in some
circumstances (https://lore.kernel.org/netdev/Z9RIyKZDNoka53EO@mini-arch/).
Let's revert it while the problem is being investigated.
Fixes: 183185a18ff9 ("gre: Fix IPv6 link-local address generation.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/8b1ce738eb15dd841aab9ef888640cab4f6ccfea.1742418408.git.gnault@redhat.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
devices."
This reverts commit 6f50175ccad4278ed3a9394c00b797b75441bd6e.
Commit 183185a18ff9 ("gre: Fix IPv6 link-local address generation.") is
going to be reverted. So let's revert the corresponding kselftest
first.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/259a9e98f7f1be7ce02b53d0b4afb7c18a8ff747.1742418408.git.gnault@redhat.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-03-19
1) Fix tunnel mode TX datapath in packet offload mode
by directly putting it to the xmit path.
From Alexandre Cassen.
2) Force software GSO only in tunnel mode in favor
of potential HW GSO. From Cosmin Ratiu.
ipsec-2025-03-19
* tag 'ipsec-2025-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm_output: Force software GSO only in tunnel mode
xfrm: fix tunnel mode TX datapath in packet offload mode
====================
Link: https://patch.msgid.link/20250319065513.987135-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
thread-group leader exit"
Christian Brauner <brauner@kernel.org> says:
This is another attempt at trying to make pidfd polling for
multi-threaded exec and premature thread-group leader exit consistent.
A quick recap of these two cases:
(1) During a multi-threaded exec by a subthread, i.e., non-thread-group
leader thread, all other threads in the thread-group including the
thread-group leader are killed and the struct pid of the
thread-group leader will be taken over by the subthread that called
exec. IOW, two tasks change their TIDs.
(2) A premature thread-group leader exit means that the thread-group
leader exited before all of the other subthreads in the thread-group
have exited.
Both cases lead to inconsistencies for pidfd polling with PIDFD_THREAD.
Any caller that holds a PIDFD_THREAD pidfd to the current thread-group
leader may or may not see an exit notification on the file descriptor
depending on when poll is performed. If the poll is performed before the
exec of the subthread has concluded an exit notification is generated
for the old thread-group leader. If the poll is performed after the exec
of the subthread has concluded no exit notification is generated for the
old thread-group leader.
The correct behavior would be to simply not generate an exit
notification on the struct pid of a subhthread exec because the struct
pid is taken over by the subthread and thus remains alive.
But this is difficult to handle because a thread-group may exit
premature as mentioned in (2). In that case an exit notification is
reliably generated but the subthreads may continue to run for an
indeterminate amount of time and thus also may exec at some point.
This tiny series tries to address this problem. If that works correctly
then no exit notifications are generated for a PIDFD_THREAD pidfd for a
thread-group leader until all subthreads have been reaped. If a
subthread should exec before no exit notification will be generated
until that task exits or it creates subthreads and repeates the cycle.
* patches from https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-0-da678ce805bf@kernel.org:
selftests/pidfd: third test for multi-threaded exec polling
selftests/pidfd: second test for multi-threaded exec polling
selftests/pidfd: first test for multi-threaded exec polling
pidfs: improve multi-threaded exec and premature thread-group leader exit polling
Link: https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-0-da678ce805bf@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Ensure that during a multi-threaded exec and premature thread-group
leader exit no exit notification is generated.
Link: https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-4-da678ce805bf@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Ensure that during a multi-threaded exec and premature thread-group
leader exit no exit notification is generated.
Link: https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-3-da678ce805bf@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add first test for premature thread-group leader exit.
Link: https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-2-da678ce805bf@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
polling
This is another attempt trying to make pidfd polling for multi-threaded
exec and premature thread-group leader exit consistent.
A quick recap of these two cases:
(1) During a multi-threaded exec by a subthread, i.e., non-thread-group
leader thread, all other threads in the thread-group including the
thread-group leader are killed and the struct pid of the
thread-group leader will be taken over by the subthread that called
exec. IOW, two tasks change their TIDs.
(2) A premature thread-group leader exit means that the thread-group
leader exited before all of the other subthreads in the thread-group
have exited.
Both cases lead to inconsistencies for pidfd polling with PIDFD_THREAD.
Any caller that holds a PIDFD_THREAD pidfd to the current thread-group
leader may or may not see an exit notification on the file descriptor
depending on when poll is performed. If the poll is performed before the
exec of the subthread has concluded an exit notification is generated
for the old thread-group leader. If the poll is performed after the exec
of the subthread has concluded no exit notification is generated for the
old thread-group leader.
The correct behavior would be to simply not generate an exit
notification on the struct pid of a subhthread exec because the struct
pid is taken over by the subthread and thus remains alive.
But this is difficult to handle because a thread-group may exit
prematurely as mentioned in (2). In that case an exit notification is
reliably generated but the subthreads may continue to run for an
indeterminate amount of time and thus also may exec at some point.
So far there was no way to distinguish between (1) and (2) internally.
This tiny series tries to address this problem by discarding
PIDFD_THREAD notification on premature thread-group leader exit.
If that works correctly then no exit notifications are generated for a
PIDFD_THREAD pidfd for a thread-group leader until all subthreads have
been reaped. If a subthread should exec aftewards no exit notification
will be generated until that task exits or it creates subthreads and
repeates the cycle.
Co-Developed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250320-work-pidfs-thread_group-v4-1-da678ce805bf@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is batman-adv bugfix:
- Ignore own maximum aggregation size during RX, Sven Eckelmann
* tag 'batadv-net-pullrequest-20250318' of git://git.open-mesh.org/linux-merge:
batman-adv: Ignore own maximum aggregation size during RX
====================
Link: https://patch.msgid.link/20250318150035.35356-1-sw@simonwunderlich.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Previous commit 8b5c171bb3dc ("neigh: new unresolved queue limits")
introduces new netlink attribute NDTPA_QUEUE_LENBYTES to represent
approximative value for deprecated QUEUE_LEN. However, it forgot to add
the associated nla_policy in nl_ntbl_parm_policy array. Fix it with one
simple NLA_U32 type policy.
Fixes: 8b5c171bb3dc ("neigh: new unresolved queue limits")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://patch.msgid.link/20250315165113.37600-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fd_install() has a questionable comment above it.
While it correctly points out a possible race against dup2(), it states:
> We need to detect this and fput() the struct file we are about to
> overwrite in this case.
>
> It should never happen - if we allow dup2() do it, _really_ bad things
> will follow.
I have difficulty parsing the above. The first sentence would suggest
fd_install() tries to detect and recover from the race (it does not),
the next one claims the race needs to be dealt with (it is, by dup2()).
Given that fd_install() does not suffer the burden, this patch removes
the above and instead expands on the race in dup2() commentary.
While here tidy up the docs around fd_install().
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250320102637.1924183-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
John Garry <john.g.garry@oracle.com> says:
These iomap changes are spun-off the XFS large atomic writes series at
https://lore.kernel.org/linux-xfs/86a64256-497a-453b-bbba-a5ac6b4cb056@oracle.com/T/#ma99c763221de9d49ea2ccfca9ff9b8d71c8b2677
The XFS parts there are not ready yet, but it is worth having the iomap
changes queued in advance.
Some much earlier changes from that same series were already queued in the
vfs tree, and these patches rework those changes - specifically the
first patch in this series does.
The most other significant change is the patch to rework how the bio flags
are set in the DIO patch.
* patches from https://lore.kernel.org/r/20250320120250.4087011-1-john.g.garry@oracle.com:
iomap: rework IOMAP atomic flags
iomap: comment on atomic write checks in iomap_dio_bio_iter()
iomap: inline iomap_dio_bio_opflags()
Link: https://lore.kernel.org/r/20250320120250.4087011-1-john.g.garry@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Flag IOMAP_ATOMIC_SW is not really required. The idea of having this flag
is that the FS ->iomap_begin callback could check if this flag is set to
decide whether to do a SW (FS-based) atomic write. But the FS can set
which ->iomap_begin callback it wants when deciding to do a FS-based
atomic write.
Furthermore, it was thought that IOMAP_ATOMIC_HW is not a proper name, as
the block driver can use SW-methods to emulate an atomic write. So change
back to IOMAP_ATOMIC.
The ->iomap_begin callback needs though to indicate to iomap core that
REQ_ATOMIC needs to be set, so add IOMAP_F_ATOMIC_BIO for that.
These changes were suggested by Christoph Hellwig and Dave Chinner.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250320120250.4087011-4-john.g.garry@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Help explain the code.
Also clarify the comment for bio size check.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250320120250.4087011-3-john.g.garry@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It is neater to build blk_opf_t fully in one place, so inline
iomap_dio_bio_opflags() in iomap_dio_bio_iter().
Also tidy up the logic in dealing with IOMAP_DIO_CALLER_COMP, in generally
separate the logic in dealing with flags associated with reads and writes.
Originally-from: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250320120250.4087011-2-john.g.garry@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This also fixes a wrong definitions for SCM_TS_OPT_ID & SO_RCVPRIORITY.
Accidentally found while working on another patchset.
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Cc: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Fixes: a89568e9be75 ("selftests: txtimestamp: add SCM_TS_OPT_ID test")
Fixes: e45469e594b2 ("sock: Introduce SO_RCVPRIORITY socket option")
Link: https://lore.kernel.org/netdev/20250314195257.34854-1-kuniyu@amazon.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250314214155.16046-1-aleksandr.mikhalitsyn@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Because of the size restriction in the TCP options space, the MPTCP
ADD_ADDR option is exclusive and cannot be sent with other MPTCP ones.
For this reason, in the linked mptcp_out_options structure, group of
fields linked to different options are part of the same union.
There is a case where the mptcp_pm_add_addr_signal() function can modify
opts->addr, but not ended up sending an ADD_ADDR. Later on, back in
mptcp_established_options, other options will be sent, but with
unexpected data written in other fields due to the union, e.g. in
opts->ext_copy. This could lead to a data stream corruption in the next
packet.
Using an intermediate variable, prevents from corrupting previously
established DSS option. The assignment of the ADD_ADDR option
parameters is now done once we are sure this ADD_ADDR option can be set
in the packet, e.g. after having dropped other suboptions.
Fixes: 1bff1e43a30e ("mptcp: optimize out option generation")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Arthur Mongodin <amongodin@randorisec.fr>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
[ Matt: the commit message has been updated: long lines splits and some
clarifications. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-1-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The SD spec version 6.0 section 6.4.1.5 requires that Vdd must be
lowered to less than 0.5V for a minimum of 1 ms when powering off a
card. Increase wait to 15 ms so that voltage has time to drain down
to 0.5V and cards can power off correctly. Issues with voltage drain
time were only observed on Apollo Lake and Bay Trail host controllers
so this fix is limited to those devices.
Signed-off-by: Erick Shepherd <erick.shepherd@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250314195021.1588090-1-erick.shepherd@ni.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
irq allocated with devm_request_irq() will be freed in devm_irq_release(),
using free_irq() in ->remove() will causes a dangling pointer, and a
subsequent double free. So remove the free_irq() in the error path and
remove path.
Fixes: 969864efae78 ("i2c: amd-mp2: use msix/msi if the hardware supports")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20221103121146.99836-1-yangyingliang@huawei.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
There is an issue in the kernel:
In tmpfs, when using the "ls" command to list the contents
of a directory with a large number of files, glibc performs
the getdents call in multiple rounds. If a concurrent unlink
occurs between these getdents calls, it may lead to duplicate
directory entries in the ls output. One possible reproduction
scenario is as follows:
Create 1026 files and execute ls and rm concurrently:
for i in {1..1026}; do
echo "This is file $i" > /tmp/dir/file$i
done
ls /tmp/dir rm /tmp/dir/file4
->getdents(file1026-file5)
->unlink(file4)
->getdents(file5,file3,file2,file1)
It is expected that the second getdents call to return file3
through file1, but instead it returns an extra file5.
The root cause of this problem is in the offset_dir_lookup
function. It uses mas_find to determine the starting position
for the current getdents call. Since mas_find locates the first
position that is greater than or equal to mas->index, when file4
is deleted, it ends up returning file5.
It can be fixed by replacing mas_find with mas_find_rev, which
finds the first position that is less than or equal to mas->index.
Fixes: b9b588f22a0c ("libfs: Use d_children list to iterate simple_offset directories")
Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com>
Link: https://lore.kernel.org/r/20250320034417.555810-1-sunyongjian@huaweicloud.com
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Many spi-mem controller drivers have a very similar debug log at the
beginning of their ->exec_op() callback implementation. This debug log is
effectively useful, so let's create one that is complete and concise
enough, so developers no longer need to write their own. The verbosity
being high, VERBOSE_DEBUG will be required in this case.
Remove the debug log from individual drivers and propose a common one.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20250320115644.2231240-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are 5 mandatory peripheral properties. They are described in a
separate binding but not explicitly required. Make sure they are
correctly marked required and update the example to reflect this.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250319094651.1290509-4-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The initial SPI controller IP from Cadence has always been implemented
into controllers from various hardware manufacturers and because of
that, it has always been (rightfully) doubled with a more specific
compatible. There are likely no reasons to keep this compatible
legitimate, alone. Make sure people do not get mislead by officially
deprecating this compatible.
While at deprecating, let's update the examples to avoid documenting
deprecated properties.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250319094651.1290509-3-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
controller is
Despite being very common in commit logs, SPI NOR controllers simply do
not exist. At least, they are not as specific as the name implies. There
are SPI memory controllers which are indeed "specialized" and optimized
for handling "memories", but most of them are just generic and accept
almost any kind of opcode, address, dummy and data cycles, making them
as suitable for NANDs than NORs.
Furthermore, this controller supports any kind of bus, from single to
octal NAND, so make it clear.
Also add a comment to mention that the initial compatible naming is too
specific (but obviously kept for backward compatibility reasons).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250319094651.1290509-2-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As both locks are highly contended during significant inode churn,
holding the inode hash lock while waiting for the sb list lock
exacerbates the problem.
Why moving it out is safe: the inode at hand still has I_NEW set and
anyone who finds it through legitimate means waits for the bit to clear,
by which time inode_sb_list_add() is guaranteed to have finished.
This significantly drops hash lock contention for me when stating 20
separate trees in parallel, each with 1000 directories * 1000 files.
However, no speed up was observed as contention increased on the other
locks, notably dentry LRU.
Even so, removal of the lock ordering will help making this faster
later.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250320004643.1903287-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Justin Iurman says:
====================
net: fix lwtunnel reentry loops
When the destination is the same after the transformation, we enter a
lwtunnel loop. This is true for most of lwt users: ioam6, rpl, seg6,
seg6_local, ila_lwt, and lwt_bpf. It can happen in their input() and
output() handlers respectively, where either dst_input() or dst_output()
is called at the end. It can also happen in xmit() handlers.
Here is an example for rpl_input():
dump_stack_lvl+0x60/0x80
rpl_input+0x9d/0x320
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
[...]
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
ip6_sublist_rcv_finish+0x85/0x90
ip6_sublist_rcv+0x236/0x2f0
... until rpl_do_srh() fails, which means skb_cow_head() failed.
This series provides a fix at the core level of lwtunnel to catch such
loops when they're not caught by the respective lwtunnel users, and
handle the loop case in ioam6 which is one of the users. This series
also comes with a new selftest to detect some dst cache reference loops
in lwtunnel users.
====================
Link: https://patch.msgid.link/20250314120048.12569-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As recently specified by commit 0ea09cbf8350 ("docs: netdev: add a note
on selftest posting") in net-next, the selftest is therefore shipped in
this series. However, this selftest does not really test this series. It
needs this series to avoid crashing the kernel. What it really tests,
thanks to kmemleak, is what was fixed by the following commits:
- commit c71a192976de ("net: ipv6: fix dst refleaks in rpl, seg6 and
ioam6 lwtunnels")
- commit 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and
ioam6 lwtunnels")
- commit c64a0727f9b1 ("net: ipv6: fix dst ref loop on input in seg6
lwt")
- commit 13e55fbaec17 ("net: ipv6: fix dst ref loop on input in rpl
lwt")
- commit 0e7633d7b95b ("net: ipv6: fix dst ref loop in ila lwtunnel")
- commit 5da15a9c11c1 ("net: ipv6: fix missing dst ref drop in ila
lwtunnel")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-4-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the lwtunnel_output() reentry loop in ioam6_iptunnel when the
destination is the same after transformation. Note that a check on the
destination address was already performed, but it was not enough. This
is the example of a lwtunnel user taking care of loops without relying
only on the last resort detection offered by lwtunnel.
Fixes: 8cb3bf8bff3c ("ipv6: ioam: Add support for the ip6ip6 encapsulation")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-3-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch acts as a parachute, catch all solution, by detecting
recursion loops in lwtunnel users and taking care of them (e.g., a loop
between routes, a loop within the same route, etc). In general, such
loops are the consequence of pathological configurations. Each lwtunnel
user is still free to catch such loops early and do whatever they want
with them. It will be the case in a separate patch for, e.g., seg6 and
seg6_local, in order to provide drop reasons and update statistics.
Another example of a lwtunnel user taking care of loops is ioam6, which
has valid use cases that include loops (e.g., inline mode), and which is
addressed by the next patch in this series. Overall, this patch acts as
a last resort to catch loops and drop packets, since we don't want to
leak something unintentionally because of a pathological configuration
in lwtunnels.
The solution in this patch reuses dev_xmit_recursion(),
dev_xmit_recursion_inc(), and dev_xmit_recursion_dec(), which seems fine
considering the context.
Closes: https://lore.kernel.org/netdev/2bc9e2079e864a9290561894d2a602d6@akamai.com/
Closes: https://lore.kernel.org/netdev/Z7NKYMY7fJT5cYWu@shredder/
Fixes: ffce41962ef6 ("lwtunnel: support dst output redirect function")
Fixes: 2536862311d2 ("lwt: Add support to redirect dst.input")
Fixes: 14972cbd34ff ("net: lwtunnel: Handle fragmentation")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-2-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
